linux/drivers/net/usb/asix_common.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * ASIX AX8817X based USB 2.0 Ethernet Devices
   4 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
   5 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
   6 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
   7 * Copyright (c) 2002-2003 TiVo Inc.
   8 */
   9
  10#include "asix.h"
  11
  12int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
  13                  u16 size, void *data, int in_pm)
  14{
  15        int ret;
  16        int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
  17
  18        BUG_ON(!dev);
  19
  20        if (!in_pm)
  21                fn = usbnet_read_cmd;
  22        else
  23                fn = usbnet_read_cmd_nopm;
  24
  25        ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
  26                 value, index, data, size);
  27
  28        if (unlikely(ret < 0))
  29                netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
  30                            index, ret);
  31
  32        return ret;
  33}
  34
  35int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
  36                   u16 size, void *data, int in_pm)
  37{
  38        int ret;
  39        int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
  40
  41        BUG_ON(!dev);
  42
  43        if (!in_pm)
  44                fn = usbnet_write_cmd;
  45        else
  46                fn = usbnet_write_cmd_nopm;
  47
  48        ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
  49                 value, index, data, size);
  50
  51        if (unlikely(ret < 0))
  52                netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
  53                            index, ret);
  54
  55        return ret;
  56}
  57
  58void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
  59                          u16 size, void *data)
  60{
  61        usbnet_write_cmd_async(dev, cmd,
  62                               USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
  63                               value, index, data, size);
  64}
  65
  66static int asix_check_host_enable(struct usbnet *dev, int in_pm)
  67{
  68        int i, ret;
  69        u8 smsr;
  70
  71        for (i = 0; i < 30; ++i) {
  72                ret = asix_set_sw_mii(dev, in_pm);
  73                if (ret == -ENODEV || ret == -ETIMEDOUT)
  74                        break;
  75                usleep_range(1000, 1100);
  76                ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
  77                                    0, 0, 1, &smsr, in_pm);
  78                if (ret == -ENODEV)
  79                        break;
  80                else if (ret < 0)
  81                        continue;
  82                else if (smsr & AX_HOST_EN)
  83                        break;
  84        }
  85
  86        return ret;
  87}
  88
  89static void reset_asix_rx_fixup_info(struct asix_rx_fixup_info *rx)
  90{
  91        /* Reset the variables that have a lifetime outside of
  92         * asix_rx_fixup_internal() so that future processing starts from a
  93         * known set of initial conditions.
  94         */
  95
  96        if (rx->ax_skb) {
  97                /* Discard any incomplete Ethernet frame in the netdev buffer */
  98                kfree_skb(rx->ax_skb);
  99                rx->ax_skb = NULL;
 100        }
 101
 102        /* Assume the Data header 32-bit word is at the start of the current
 103         * or next URB socket buffer so reset all the state variables.
 104         */
 105        rx->remaining = 0;
 106        rx->split_head = false;
 107        rx->header = 0;
 108}
 109
 110int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
 111                           struct asix_rx_fixup_info *rx)
 112{
 113        int offset = 0;
 114        u16 size;
 115
 116        /* When an Ethernet frame spans multiple URB socket buffers,
 117         * do a sanity test for the Data header synchronisation.
 118         * Attempt to detect the situation of the previous socket buffer having
 119         * been truncated or a socket buffer was missing. These situations
 120         * cause a discontinuity in the data stream and therefore need to avoid
 121         * appending bad data to the end of the current netdev socket buffer.
 122         * Also avoid unnecessarily discarding a good current netdev socket
 123         * buffer.
 124         */
 125        if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) {
 126                offset = ((rx->remaining + 1) & 0xfffe);
 127                rx->header = get_unaligned_le32(skb->data + offset);
 128                offset = 0;
 129
 130                size = (u16)(rx->header & 0x7ff);
 131                if (size != ((~rx->header >> 16) & 0x7ff)) {
 132                        netdev_err(dev->net, "asix_rx_fixup() Data Header synchronisation was lost, remaining %d\n",
 133                                   rx->remaining);
 134                        reset_asix_rx_fixup_info(rx);
 135                }
 136        }
 137
 138        while (offset + sizeof(u16) <= skb->len) {
 139                u16 copy_length;
 140
 141                if (!rx->remaining) {
 142                        if (skb->len - offset == sizeof(u16)) {
 143                                rx->header = get_unaligned_le16(
 144                                                skb->data + offset);
 145                                rx->split_head = true;
 146                                offset += sizeof(u16);
 147                                break;
 148                        }
 149
 150                        if (rx->split_head == true) {
 151                                rx->header |= (get_unaligned_le16(
 152                                                skb->data + offset) << 16);
 153                                rx->split_head = false;
 154                                offset += sizeof(u16);
 155                        } else {
 156                                rx->header = get_unaligned_le32(skb->data +
 157                                                                offset);
 158                                offset += sizeof(u32);
 159                        }
 160
 161                        /* take frame length from Data header 32-bit word */
 162                        size = (u16)(rx->header & 0x7ff);
 163                        if (size != ((~rx->header >> 16) & 0x7ff)) {
 164                                netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n",
 165                                           rx->header, offset);
 166                                reset_asix_rx_fixup_info(rx);
 167                                return 0;
 168                        }
 169                        if (size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
 170                                netdev_dbg(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
 171                                           size);
 172                                reset_asix_rx_fixup_info(rx);
 173                                return 0;
 174                        }
 175
 176                        /* Sometimes may fail to get a netdev socket buffer but
 177                         * continue to process the URB socket buffer so that
 178                         * synchronisation of the Ethernet frame Data header
 179                         * word is maintained.
 180                         */
 181                        rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
 182
 183                        rx->remaining = size;
 184                }
 185
 186                if (rx->remaining > skb->len - offset) {
 187                        copy_length = skb->len - offset;
 188                        rx->remaining -= copy_length;
 189                } else {
 190                        copy_length = rx->remaining;
 191                        rx->remaining = 0;
 192                }
 193
 194                if (rx->ax_skb) {
 195                        skb_put_data(rx->ax_skb, skb->data + offset,
 196                                     copy_length);
 197                        if (!rx->remaining) {
 198                                usbnet_skb_return(dev, rx->ax_skb);
 199                                rx->ax_skb = NULL;
 200                        }
 201                }
 202
 203                offset += (copy_length + 1) & 0xfffe;
 204        }
 205
 206        if (skb->len != offset) {
 207                netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n",
 208                           skb->len, offset);
 209                reset_asix_rx_fixup_info(rx);
 210                return 0;
 211        }
 212
 213        return 1;
 214}
 215
 216int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb)
 217{
 218        struct asix_common_private *dp = dev->driver_priv;
 219        struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
 220
 221        return asix_rx_fixup_internal(dev, skb, rx);
 222}
 223
 224void asix_rx_fixup_common_free(struct asix_common_private *dp)
 225{
 226        struct asix_rx_fixup_info *rx;
 227
 228        if (!dp)
 229                return;
 230
 231        rx = &dp->rx_fixup_info;
 232
 233        if (rx->ax_skb) {
 234                kfree_skb(rx->ax_skb);
 235                rx->ax_skb = NULL;
 236        }
 237}
 238
 239struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 240                              gfp_t flags)
 241{
 242        int padlen;
 243        int headroom = skb_headroom(skb);
 244        int tailroom = skb_tailroom(skb);
 245        u32 packet_len;
 246        u32 padbytes = 0xffff0000;
 247        void *ptr;
 248
 249        padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
 250
 251        /* We need to push 4 bytes in front of frame (packet_len)
 252         * and maybe add 4 bytes after the end (if padlen is 4)
 253         *
 254         * Avoid skb_copy_expand() expensive call, using following rules :
 255         * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
 256         *   is false (and if we have 4 bytes of headroom)
 257         * - We are allowed to put 4 bytes at tail if skb_cloned()
 258         *   is false (and if we have 4 bytes of tailroom)
 259         *
 260         * TCP packets for example are cloned, but __skb_header_release()
 261         * was called in tcp stack, allowing us to use headroom for our needs.
 262         */
 263        if (!skb_header_cloned(skb) &&
 264            !(padlen && skb_cloned(skb)) &&
 265            headroom + tailroom >= 4 + padlen) {
 266                /* following should not happen, but better be safe */
 267                if (headroom < 4 ||
 268                    tailroom < padlen) {
 269                        skb->data = memmove(skb->head + 4, skb->data, skb->len);
 270                        skb_set_tail_pointer(skb, skb->len);
 271                }
 272        } else {
 273                struct sk_buff *skb2;
 274
 275                skb2 = skb_copy_expand(skb, 4, padlen, flags);
 276                dev_kfree_skb_any(skb);
 277                skb = skb2;
 278                if (!skb)
 279                        return NULL;
 280        }
 281
 282        packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
 283        ptr = skb_push(skb, 4);
 284        put_unaligned_le32(packet_len, ptr);
 285
 286        if (padlen) {
 287                put_unaligned_le32(padbytes, skb_tail_pointer(skb));
 288                skb_put(skb, sizeof(padbytes));
 289        }
 290
 291        usbnet_set_skb_tx_stats(skb, 1, 0);
 292        return skb;
 293}
 294
 295int asix_set_sw_mii(struct usbnet *dev, int in_pm)
 296{
 297        int ret;
 298        ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm);
 299
 300        if (ret < 0)
 301                netdev_err(dev->net, "Failed to enable software MII access\n");
 302        return ret;
 303}
 304
 305int asix_set_hw_mii(struct usbnet *dev, int in_pm)
 306{
 307        int ret;
 308        ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm);
 309        if (ret < 0)
 310                netdev_err(dev->net, "Failed to enable hardware MII access\n");
 311        return ret;
 312}
 313
 314int asix_read_phy_addr(struct usbnet *dev, bool internal)
 315{
 316        int ret, offset;
 317        u8 buf[2];
 318
 319        ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0);
 320        if (ret < 0)
 321                goto error;
 322
 323        if (ret < 2) {
 324                ret = -EIO;
 325                goto error;
 326        }
 327
 328        offset = (internal ? 1 : 0);
 329        ret = buf[offset];
 330
 331        netdev_dbg(dev->net, "%s PHY address 0x%x\n",
 332                   internal ? "internal" : "external", ret);
 333
 334        return ret;
 335
 336error:
 337        netdev_err(dev->net, "Error reading PHY_ID register: %02x\n", ret);
 338
 339        return ret;
 340}
 341
 342int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm)
 343{
 344        int ret;
 345
 346        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm);
 347        if (ret < 0)
 348                netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
 349
 350        return ret;
 351}
 352
 353u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm)
 354{
 355        __le16 v;
 356        int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm);
 357
 358        if (ret < 0) {
 359                netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
 360                goto out;
 361        }
 362        ret = le16_to_cpu(v);
 363out:
 364        return ret;
 365}
 366
 367int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm)
 368{
 369        int ret;
 370
 371        netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
 372        ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm);
 373        if (ret < 0)
 374                netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
 375                           mode, ret);
 376
 377        return ret;
 378}
 379
 380u16 asix_read_medium_status(struct usbnet *dev, int in_pm)
 381{
 382        __le16 v;
 383        int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
 384                                0, 0, 2, &v, in_pm);
 385
 386        if (ret < 0) {
 387                netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
 388                           ret);
 389                return ret;     /* TODO: callers not checking for error ret */
 390        }
 391
 392        return le16_to_cpu(v);
 393
 394}
 395
 396int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
 397{
 398        int ret;
 399
 400        netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
 401        ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
 402                             mode, 0, 0, NULL, in_pm);
 403        if (ret < 0)
 404                netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
 405                           mode, ret);
 406
 407        return ret;
 408}
 409
 410/* set MAC link settings according to information from phylib */
 411void asix_adjust_link(struct net_device *netdev)
 412{
 413        struct phy_device *phydev = netdev->phydev;
 414        struct usbnet *dev = netdev_priv(netdev);
 415        u16 mode = 0;
 416
 417        if (phydev->link) {
 418                mode = AX88772_MEDIUM_DEFAULT;
 419
 420                if (phydev->duplex == DUPLEX_HALF)
 421                        mode &= ~AX_MEDIUM_FD;
 422
 423                if (phydev->speed != SPEED_100)
 424                        mode &= ~AX_MEDIUM_PS;
 425        }
 426
 427        asix_write_medium_mode(dev, mode, 0);
 428        phy_print_status(phydev);
 429}
 430
 431int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
 432{
 433        int ret;
 434
 435        netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
 436        ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm);
 437        if (ret < 0)
 438                netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
 439                           value, ret);
 440
 441        if (sleep)
 442                msleep(sleep);
 443
 444        return ret;
 445}
 446
 447/*
 448 * AX88772 & AX88178 have a 16-bit RX_CTL value
 449 */
 450void asix_set_multicast(struct net_device *net)
 451{
 452        struct usbnet *dev = netdev_priv(net);
 453        struct asix_data *data = (struct asix_data *)&dev->data;
 454        u16 rx_ctl = AX_DEFAULT_RX_CTL;
 455
 456        if (net->flags & IFF_PROMISC) {
 457                rx_ctl |= AX_RX_CTL_PRO;
 458        } else if (net->flags & IFF_ALLMULTI ||
 459                   netdev_mc_count(net) > AX_MAX_MCAST) {
 460                rx_ctl |= AX_RX_CTL_AMALL;
 461        } else if (netdev_mc_empty(net)) {
 462                /* just broadcast and directed */
 463        } else {
 464                /* We use the 20 byte dev->data
 465                 * for our 8 byte filter buffer
 466                 * to avoid allocating memory that
 467                 * is tricky to free later */
 468                struct netdev_hw_addr *ha;
 469                u32 crc_bits;
 470
 471                memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
 472
 473                /* Build the multicast hash filter. */
 474                netdev_for_each_mc_addr(ha, net) {
 475                        crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
 476                        data->multi_filter[crc_bits >> 3] |=
 477                            1 << (crc_bits & 7);
 478                }
 479
 480                asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
 481                                   AX_MCAST_FILTER_SIZE, data->multi_filter);
 482
 483                rx_ctl |= AX_RX_CTL_AM;
 484        }
 485
 486        asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
 487}
 488
 489int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 490{
 491        struct usbnet *dev = netdev_priv(netdev);
 492        __le16 res;
 493        int ret;
 494
 495        mutex_lock(&dev->phy_mutex);
 496
 497        ret = asix_check_host_enable(dev, 0);
 498        if (ret == -ENODEV || ret == -ETIMEDOUT) {
 499                mutex_unlock(&dev->phy_mutex);
 500                return ret;
 501        }
 502
 503        ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2,
 504                            &res, 0);
 505        if (ret < 0)
 506                goto out;
 507
 508        ret = asix_set_hw_mii(dev, 0);
 509out:
 510        mutex_unlock(&dev->phy_mutex);
 511
 512        netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
 513                        phy_id, loc, le16_to_cpu(res));
 514
 515        return ret < 0 ? ret : le16_to_cpu(res);
 516}
 517
 518static int __asix_mdio_write(struct net_device *netdev, int phy_id, int loc,
 519                             int val)
 520{
 521        struct usbnet *dev = netdev_priv(netdev);
 522        __le16 res = cpu_to_le16(val);
 523        int ret;
 524
 525        netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 526                        phy_id, loc, val);
 527
 528        mutex_lock(&dev->phy_mutex);
 529
 530        ret = asix_check_host_enable(dev, 0);
 531        if (ret == -ENODEV)
 532                goto out;
 533
 534        ret = asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2,
 535                             &res, 0);
 536        if (ret < 0)
 537                goto out;
 538
 539        ret = asix_set_hw_mii(dev, 0);
 540out:
 541        mutex_unlock(&dev->phy_mutex);
 542
 543        return ret < 0 ? ret : 0;
 544}
 545
 546void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 547{
 548        __asix_mdio_write(netdev, phy_id, loc, val);
 549}
 550
 551/* MDIO read and write wrappers for phylib */
 552int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
 553{
 554        struct usbnet *priv = bus->priv;
 555
 556        return asix_mdio_read(priv->net, phy_id, regnum);
 557}
 558
 559int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val)
 560{
 561        struct usbnet *priv = bus->priv;
 562
 563        return __asix_mdio_write(priv->net, phy_id, regnum, val);
 564}
 565
 566int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
 567{
 568        struct usbnet *dev = netdev_priv(netdev);
 569        __le16 res;
 570        int ret;
 571
 572        mutex_lock(&dev->phy_mutex);
 573
 574        ret = asix_check_host_enable(dev, 1);
 575        if (ret == -ENODEV || ret == -ETIMEDOUT) {
 576                mutex_unlock(&dev->phy_mutex);
 577                return ret;
 578        }
 579
 580        asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 581                      (__u16)loc, 2, &res, 1);
 582        asix_set_hw_mii(dev, 1);
 583        mutex_unlock(&dev->phy_mutex);
 584
 585        netdev_dbg(dev->net, "asix_mdio_read_nopm() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
 586                        phy_id, loc, le16_to_cpu(res));
 587
 588        return le16_to_cpu(res);
 589}
 590
 591void
 592asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
 593{
 594        struct usbnet *dev = netdev_priv(netdev);
 595        __le16 res = cpu_to_le16(val);
 596        int ret;
 597
 598        netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
 599                        phy_id, loc, val);
 600
 601        mutex_lock(&dev->phy_mutex);
 602
 603        ret = asix_check_host_enable(dev, 1);
 604        if (ret == -ENODEV) {
 605                mutex_unlock(&dev->phy_mutex);
 606                return;
 607        }
 608
 609        asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 610                       (__u16)loc, 2, &res, 1);
 611        asix_set_hw_mii(dev, 1);
 612        mutex_unlock(&dev->phy_mutex);
 613}
 614
 615void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 616{
 617        struct usbnet *dev = netdev_priv(net);
 618        u8 opt;
 619
 620        if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE,
 621                          0, 0, 1, &opt, 0) < 0) {
 622                wolinfo->supported = 0;
 623                wolinfo->wolopts = 0;
 624                return;
 625        }
 626        wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
 627        wolinfo->wolopts = 0;
 628        if (opt & AX_MONITOR_LINK)
 629                wolinfo->wolopts |= WAKE_PHY;
 630        if (opt & AX_MONITOR_MAGIC)
 631                wolinfo->wolopts |= WAKE_MAGIC;
 632}
 633
 634int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 635{
 636        struct usbnet *dev = netdev_priv(net);
 637        u8 opt = 0;
 638
 639        if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
 640                return -EINVAL;
 641
 642        if (wolinfo->wolopts & WAKE_PHY)
 643                opt |= AX_MONITOR_LINK;
 644        if (wolinfo->wolopts & WAKE_MAGIC)
 645                opt |= AX_MONITOR_MAGIC;
 646
 647        if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
 648                              opt, 0, 0, NULL, 0) < 0)
 649                return -EINVAL;
 650
 651        return 0;
 652}
 653
 654int asix_get_eeprom_len(struct net_device *net)
 655{
 656        return AX_EEPROM_LEN;
 657}
 658
 659int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 660                    u8 *data)
 661{
 662        struct usbnet *dev = netdev_priv(net);
 663        u16 *eeprom_buff;
 664        int first_word, last_word;
 665        int i;
 666
 667        if (eeprom->len == 0)
 668                return -EINVAL;
 669
 670        eeprom->magic = AX_EEPROM_MAGIC;
 671
 672        first_word = eeprom->offset >> 1;
 673        last_word = (eeprom->offset + eeprom->len - 1) >> 1;
 674
 675        eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
 676                                    GFP_KERNEL);
 677        if (!eeprom_buff)
 678                return -ENOMEM;
 679
 680        /* ax8817x returns 2 bytes from eeprom on read */
 681        for (i = first_word; i <= last_word; i++) {
 682                if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
 683                                  &eeprom_buff[i - first_word], 0) < 0) {
 684                        kfree(eeprom_buff);
 685                        return -EIO;
 686                }
 687        }
 688
 689        memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
 690        kfree(eeprom_buff);
 691        return 0;
 692}
 693
 694int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
 695                    u8 *data)
 696{
 697        struct usbnet *dev = netdev_priv(net);
 698        u16 *eeprom_buff;
 699        int first_word, last_word;
 700        int i;
 701        int ret;
 702
 703        netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
 704                   eeprom->len, eeprom->offset, eeprom->magic);
 705
 706        if (eeprom->len == 0)
 707                return -EINVAL;
 708
 709        if (eeprom->magic != AX_EEPROM_MAGIC)
 710                return -EINVAL;
 711
 712        first_word = eeprom->offset >> 1;
 713        last_word = (eeprom->offset + eeprom->len - 1) >> 1;
 714
 715        eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
 716                                    GFP_KERNEL);
 717        if (!eeprom_buff)
 718                return -ENOMEM;
 719
 720        /* align data to 16 bit boundaries, read the missing data from
 721           the EEPROM */
 722        if (eeprom->offset & 1) {
 723                ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
 724                                    &eeprom_buff[0], 0);
 725                if (ret < 0) {
 726                        netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
 727                        goto free;
 728                }
 729        }
 730
 731        if ((eeprom->offset + eeprom->len) & 1) {
 732                ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
 733                                    &eeprom_buff[last_word - first_word], 0);
 734                if (ret < 0) {
 735                        netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
 736                        goto free;
 737                }
 738        }
 739
 740        memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
 741
 742        /* write data to EEPROM */
 743        ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0);
 744        if (ret < 0) {
 745                netdev_err(net, "Failed to enable EEPROM write\n");
 746                goto free;
 747        }
 748        msleep(20);
 749
 750        for (i = first_word; i <= last_word; i++) {
 751                netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
 752                           i, eeprom_buff[i - first_word]);
 753                ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
 754                                     eeprom_buff[i - first_word], 0, NULL, 0);
 755                if (ret < 0) {
 756                        netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
 757                                   i);
 758                        goto free;
 759                }
 760                msleep(20);
 761        }
 762
 763        ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0);
 764        if (ret < 0) {
 765                netdev_err(net, "Failed to disable EEPROM write\n");
 766                goto free;
 767        }
 768
 769        ret = 0;
 770free:
 771        kfree(eeprom_buff);
 772        return ret;
 773}
 774
 775void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
 776{
 777        /* Inherit standard device info */
 778        usbnet_get_drvinfo(net, info);
 779        strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver));
 780        strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
 781}
 782
 783int asix_set_mac_address(struct net_device *net, void *p)
 784{
 785        struct usbnet *dev = netdev_priv(net);
 786        struct asix_data *data = (struct asix_data *)&dev->data;
 787        struct sockaddr *addr = p;
 788
 789        if (netif_running(net))
 790                return -EBUSY;
 791        if (!is_valid_ether_addr(addr->sa_data))
 792                return -EADDRNOTAVAIL;
 793
 794        memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
 795
 796        /* We use the 20 byte dev->data
 797         * for our 6 byte mac buffer
 798         * to avoid allocating memory that
 799         * is tricky to free later */
 800        memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
 801        asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
 802                                                        data->mac_addr);
 803
 804        return 0;
 805}
 806