linux/drivers/net/usb/cdc_mbim.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Copyright (c) 2012  Smith Micro Software, Inc.
   4 * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
   5 *
   6 * This driver is based on and reuse most of cdc_ncm, which is
   7 * Copyright (C) ST-Ericsson 2010-2012
   8 */
   9
  10#include <linux/module.h>
  11#include <linux/netdevice.h>
  12#include <linux/ethtool.h>
  13#include <linux/if_vlan.h>
  14#include <linux/ip.h>
  15#include <linux/mii.h>
  16#include <linux/usb.h>
  17#include <linux/usb/cdc.h>
  18#include <linux/usb/usbnet.h>
  19#include <linux/usb/cdc-wdm.h>
  20#include <linux/usb/cdc_ncm.h>
  21#include <net/ipv6.h>
  22#include <net/addrconf.h>
  23#include <net/ipv6_stubs.h>
  24
  25/* alternative VLAN for IP session 0 if not untagged */
  26#define MBIM_IPS0_VID   4094
  27
  28/* driver specific data - must match cdc_ncm usage */
  29struct cdc_mbim_state {
  30        struct cdc_ncm_ctx *ctx;
  31        atomic_t pmcount;
  32        struct usb_driver *subdriver;
  33        unsigned long _unused;
  34        unsigned long flags;
  35};
  36
  37/* flags for the cdc_mbim_state.flags field */
  38enum cdc_mbim_flags {
  39        FLAG_IPS0_VLAN = 1 << 0,        /* IP session 0 is tagged  */
  40};
  41
  42/* using a counter to merge subdriver requests with our own into a combined state */
  43static int cdc_mbim_manage_power(struct usbnet *dev, int on)
  44{
  45        struct cdc_mbim_state *info = (void *)&dev->data;
  46        int rv = 0;
  47
  48        dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(&info->pmcount), on);
  49
  50        if ((on && atomic_add_return(1, &info->pmcount) == 1) || (!on && atomic_dec_and_test(&info->pmcount))) {
  51                /* need autopm_get/put here to ensure the usbcore sees the new value */
  52                rv = usb_autopm_get_interface(dev->intf);
  53                dev->intf->needs_remote_wakeup = on;
  54                if (!rv)
  55                        usb_autopm_put_interface(dev->intf);
  56        }
  57        return 0;
  58}
  59
  60static int cdc_mbim_wdm_manage_power(struct usb_interface *intf, int status)
  61{
  62        struct usbnet *dev = usb_get_intfdata(intf);
  63
  64        /* can be called while disconnecting */
  65        if (!dev)
  66                return 0;
  67
  68        return cdc_mbim_manage_power(dev, status);
  69}
  70
  71static int cdc_mbim_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
  72{
  73        struct usbnet *dev = netdev_priv(netdev);
  74        struct cdc_mbim_state *info = (void *)&dev->data;
  75
  76        /* creation of this VLAN is a request to tag IP session 0 */
  77        if (vid == MBIM_IPS0_VID)
  78                info->flags |= FLAG_IPS0_VLAN;
  79        else
  80                if (vid >= 512) /* we don't map these to MBIM session */
  81                        return -EINVAL;
  82        return 0;
  83}
  84
  85static int cdc_mbim_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)
  86{
  87        struct usbnet *dev = netdev_priv(netdev);
  88        struct cdc_mbim_state *info = (void *)&dev->data;
  89
  90        /* this is a request for an untagged IP session 0 */
  91        if (vid == MBIM_IPS0_VID)
  92                info->flags &= ~FLAG_IPS0_VLAN;
  93        return 0;
  94}
  95
  96static const struct net_device_ops cdc_mbim_netdev_ops = {
  97        .ndo_open             = usbnet_open,
  98        .ndo_stop             = usbnet_stop,
  99        .ndo_start_xmit       = usbnet_start_xmit,
 100        .ndo_tx_timeout       = usbnet_tx_timeout,
 101        .ndo_get_stats64      = dev_get_tstats64,
 102        .ndo_change_mtu       = cdc_ncm_change_mtu,
 103        .ndo_set_mac_address  = eth_mac_addr,
 104        .ndo_validate_addr    = eth_validate_addr,
 105        .ndo_vlan_rx_add_vid  = cdc_mbim_rx_add_vid,
 106        .ndo_vlan_rx_kill_vid = cdc_mbim_rx_kill_vid,
 107};
 108
 109/* Change the control interface altsetting and update the .driver_info
 110 * pointer if the matching entry after changing class codes points to
 111 * a different struct
 112 */
 113static int cdc_mbim_set_ctrlalt(struct usbnet *dev, struct usb_interface *intf, u8 alt)
 114{
 115        struct usb_driver *driver = to_usb_driver(intf->dev.driver);
 116        const struct usb_device_id *id;
 117        struct driver_info *info;
 118        int ret;
 119
 120        ret = usb_set_interface(dev->udev,
 121                                intf->cur_altsetting->desc.bInterfaceNumber,
 122                                alt);
 123        if (ret)
 124                return ret;
 125
 126        id = usb_match_id(intf, driver->id_table);
 127        if (!id)
 128                return -ENODEV;
 129
 130        info = (struct driver_info *)id->driver_info;
 131        if (info != dev->driver_info) {
 132                dev_dbg(&intf->dev, "driver_info updated to '%s'\n",
 133                        info->description);
 134                dev->driver_info = info;
 135        }
 136        return 0;
 137}
 138
 139static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf)
 140{
 141        struct cdc_ncm_ctx *ctx;
 142        struct usb_driver *subdriver = ERR_PTR(-ENODEV);
 143        int ret = -ENODEV;
 144        u8 data_altsetting = 1;
 145        struct cdc_mbim_state *info = (void *)&dev->data;
 146
 147        /* should we change control altsetting on a NCM/MBIM function? */
 148        if (cdc_ncm_select_altsetting(intf) == CDC_NCM_COMM_ALTSETTING_MBIM) {
 149                data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
 150                ret = cdc_mbim_set_ctrlalt(dev, intf, CDC_NCM_COMM_ALTSETTING_MBIM);
 151                if (ret)
 152                        goto err;
 153                ret = -ENODEV;
 154        }
 155
 156        /* we will hit this for NCM/MBIM functions if prefer_mbim is false */
 157        if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
 158                goto err;
 159
 160        ret = cdc_ncm_bind_common(dev, intf, data_altsetting, dev->driver_info->data);
 161        if (ret)
 162                goto err;
 163
 164        ctx = info->ctx;
 165
 166        /* The MBIM descriptor and the status endpoint are required */
 167        if (ctx->mbim_desc && dev->status)
 168                subdriver = usb_cdc_wdm_register(ctx->control,
 169                                                 &dev->status->desc,
 170                                                 le16_to_cpu(ctx->mbim_desc->wMaxControlMessage),
 171                                                 WWAN_PORT_MBIM,
 172                                                 cdc_mbim_wdm_manage_power);
 173        if (IS_ERR(subdriver)) {
 174                ret = PTR_ERR(subdriver);
 175                cdc_ncm_unbind(dev, intf);
 176                goto err;
 177        }
 178
 179        /* can't let usbnet use the interrupt endpoint */
 180        dev->status = NULL;
 181        info->subdriver = subdriver;
 182
 183        /* MBIM cannot do ARP */
 184        dev->net->flags |= IFF_NOARP;
 185
 186        /* no need to put the VLAN tci in the packet headers */
 187        dev->net->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_FILTER;
 188
 189        /* monitor VLAN additions and removals */
 190        dev->net->netdev_ops = &cdc_mbim_netdev_ops;
 191err:
 192        return ret;
 193}
 194
 195static void cdc_mbim_unbind(struct usbnet *dev, struct usb_interface *intf)
 196{
 197        struct cdc_mbim_state *info = (void *)&dev->data;
 198        struct cdc_ncm_ctx *ctx = info->ctx;
 199
 200        /* disconnect subdriver from control interface */
 201        if (info->subdriver && info->subdriver->disconnect)
 202                info->subdriver->disconnect(ctx->control);
 203        info->subdriver = NULL;
 204
 205        /* let NCM unbind clean up both control and data interface */
 206        cdc_ncm_unbind(dev, intf);
 207}
 208
 209/* verify that the ethernet protocol is IPv4 or IPv6 */
 210static bool is_ip_proto(__be16 proto)
 211{
 212        switch (proto) {
 213        case htons(ETH_P_IP):
 214        case htons(ETH_P_IPV6):
 215                return true;
 216        }
 217        return false;
 218}
 219
 220static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
 221{
 222        struct sk_buff *skb_out;
 223        struct cdc_mbim_state *info = (void *)&dev->data;
 224        struct cdc_ncm_ctx *ctx = info->ctx;
 225        __le32 sign = cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN);
 226        u16 tci = 0;
 227        bool is_ip;
 228        u8 *c;
 229
 230        if (!ctx)
 231                goto error;
 232
 233        if (skb) {
 234                if (skb->len <= ETH_HLEN)
 235                        goto error;
 236
 237                /* Some applications using e.g. packet sockets will
 238                 * bypass the VLAN acceleration and create tagged
 239                 * ethernet frames directly.  We primarily look for
 240                 * the accelerated out-of-band tag, but fall back if
 241                 * required
 242                 */
 243                skb_reset_mac_header(skb);
 244                if (vlan_get_tag(skb, &tci) < 0 && skb->len > VLAN_ETH_HLEN &&
 245                    __vlan_get_tag(skb, &tci) == 0) {
 246                        is_ip = is_ip_proto(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
 247                        skb_pull(skb, VLAN_ETH_HLEN);
 248                } else {
 249                        is_ip = is_ip_proto(eth_hdr(skb)->h_proto);
 250                        skb_pull(skb, ETH_HLEN);
 251                }
 252
 253                /* Is IP session <0> tagged too? */
 254                if (info->flags & FLAG_IPS0_VLAN) {
 255                        /* drop all untagged packets */
 256                        if (!tci)
 257                                goto error;
 258                        /* map MBIM_IPS0_VID to IPS<0> */
 259                        if (tci == MBIM_IPS0_VID)
 260                                tci = 0;
 261                }
 262
 263                /* mapping VLANs to MBIM sessions:
 264                 *   no tag     => IPS session <0> if !FLAG_IPS0_VLAN
 265                 *   1 - 255    => IPS session <vlanid>
 266                 *   256 - 511  => DSS session <vlanid - 256>
 267                 *   512 - 4093 => unsupported, drop
 268                 *   4094       => IPS session <0> if FLAG_IPS0_VLAN
 269                 */
 270
 271                switch (tci & 0x0f00) {
 272                case 0x0000: /* VLAN ID 0 - 255 */
 273                        if (!is_ip)
 274                                goto error;
 275                        c = (u8 *)&sign;
 276                        c[3] = tci;
 277                        break;
 278                case 0x0100: /* VLAN ID 256 - 511 */
 279                        if (is_ip)
 280                                goto error;
 281                        sign = cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN);
 282                        c = (u8 *)&sign;
 283                        c[3] = tci;
 284                        break;
 285                default:
 286                        netif_err(dev, tx_err, dev->net,
 287                                  "unsupported tci=0x%04x\n", tci);
 288                        goto error;
 289                }
 290        }
 291
 292        spin_lock_bh(&ctx->mtx);
 293        skb_out = cdc_ncm_fill_tx_frame(dev, skb, sign);
 294        spin_unlock_bh(&ctx->mtx);
 295        return skb_out;
 296
 297error:
 298        if (skb)
 299                dev_kfree_skb_any(skb);
 300
 301        return NULL;
 302}
 303
 304/* Some devices are known to send Neighbor Solicitation messages and
 305 * require Neighbor Advertisement replies.  The IPv6 core will not
 306 * respond since IFF_NOARP is set, so we must handle them ourselves.
 307 */
 308static void do_neigh_solicit(struct usbnet *dev, u8 *buf, u16 tci)
 309{
 310        struct ipv6hdr *iph = (void *)buf;
 311        struct nd_msg *msg = (void *)(iph + 1);
 312        struct net_device *netdev;
 313        struct inet6_dev *in6_dev;
 314        bool is_router;
 315
 316        /* we'll only respond to requests from unicast addresses to
 317         * our solicited node addresses.
 318         */
 319        if (!ipv6_addr_is_solict_mult(&iph->daddr) ||
 320            !(ipv6_addr_type(&iph->saddr) & IPV6_ADDR_UNICAST))
 321                return;
 322
 323        /* need to send the NA on the VLAN dev, if any */
 324        rcu_read_lock();
 325        if (tci) {
 326                netdev = __vlan_find_dev_deep_rcu(dev->net, htons(ETH_P_8021Q),
 327                                                  tci);
 328                if (!netdev) {
 329                        rcu_read_unlock();
 330                        return;
 331                }
 332        } else {
 333                netdev = dev->net;
 334        }
 335        dev_hold(netdev);
 336        rcu_read_unlock();
 337
 338        in6_dev = in6_dev_get(netdev);
 339        if (!in6_dev)
 340                goto out;
 341        is_router = !!in6_dev->cnf.forwarding;
 342        in6_dev_put(in6_dev);
 343
 344        /* ipv6_stub != NULL if in6_dev_get returned an inet6_dev */
 345        ipv6_stub->ndisc_send_na(netdev, &iph->saddr, &msg->target,
 346                                 is_router /* router */,
 347                                 true /* solicited */,
 348                                 false /* override */,
 349                                 true /* inc_opt */);
 350out:
 351        dev_put(netdev);
 352}
 353
 354static bool is_neigh_solicit(u8 *buf, size_t len)
 355{
 356        struct ipv6hdr *iph = (void *)buf;
 357        struct nd_msg *msg = (void *)(iph + 1);
 358
 359        return (len >= sizeof(struct ipv6hdr) + sizeof(struct nd_msg) &&
 360                iph->nexthdr == IPPROTO_ICMPV6 &&
 361                msg->icmph.icmp6_code == 0 &&
 362                msg->icmph.icmp6_type == NDISC_NEIGHBOUR_SOLICITATION);
 363}
 364
 365
 366static struct sk_buff *cdc_mbim_process_dgram(struct usbnet *dev, u8 *buf, size_t len, u16 tci)
 367{
 368        __be16 proto = htons(ETH_P_802_3);
 369        struct sk_buff *skb = NULL;
 370
 371        if (tci < 256 || tci == MBIM_IPS0_VID) { /* IPS session? */
 372                if (len < sizeof(struct iphdr))
 373                        goto err;
 374
 375                switch (*buf & 0xf0) {
 376                case 0x40:
 377                        proto = htons(ETH_P_IP);
 378                        break;
 379                case 0x60:
 380                        if (is_neigh_solicit(buf, len))
 381                                do_neigh_solicit(dev, buf, tci);
 382                        proto = htons(ETH_P_IPV6);
 383                        break;
 384                default:
 385                        goto err;
 386                }
 387        }
 388
 389        skb = netdev_alloc_skb_ip_align(dev->net,  len + ETH_HLEN);
 390        if (!skb)
 391                goto err;
 392
 393        /* add an ethernet header */
 394        skb_put(skb, ETH_HLEN);
 395        skb_reset_mac_header(skb);
 396        eth_hdr(skb)->h_proto = proto;
 397        eth_zero_addr(eth_hdr(skb)->h_source);
 398        memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
 399
 400        /* add datagram */
 401        skb_put_data(skb, buf, len);
 402
 403        /* map MBIM session to VLAN */
 404        if (tci)
 405                __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tci);
 406err:
 407        return skb;
 408}
 409
 410static int cdc_mbim_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in)
 411{
 412        struct sk_buff *skb;
 413        struct cdc_mbim_state *info = (void *)&dev->data;
 414        struct cdc_ncm_ctx *ctx = info->ctx;
 415        int len;
 416        int nframes;
 417        int x;
 418        int offset;
 419        struct usb_cdc_ncm_ndp16 *ndp16;
 420        struct usb_cdc_ncm_dpe16 *dpe16;
 421        int ndpoffset;
 422        int loopcount = 50; /* arbitrary max preventing infinite loop */
 423        u32 payload = 0;
 424        u8 *c;
 425        u16 tci;
 426
 427        ndpoffset = cdc_ncm_rx_verify_nth16(ctx, skb_in);
 428        if (ndpoffset < 0)
 429                goto error;
 430
 431next_ndp:
 432        nframes = cdc_ncm_rx_verify_ndp16(skb_in, ndpoffset);
 433        if (nframes < 0)
 434                goto error;
 435
 436        ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset);
 437
 438        switch (ndp16->dwSignature & cpu_to_le32(0x00ffffff)) {
 439        case cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN):
 440                c = (u8 *)&ndp16->dwSignature;
 441                tci = c[3];
 442                /* tag IPS<0> packets too if MBIM_IPS0_VID exists */
 443                if (!tci && info->flags & FLAG_IPS0_VLAN)
 444                        tci = MBIM_IPS0_VID;
 445                break;
 446        case cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN):
 447                c = (u8 *)&ndp16->dwSignature;
 448                tci = c[3] + 256;
 449                break;
 450        default:
 451                netif_dbg(dev, rx_err, dev->net,
 452                          "unsupported NDP signature <0x%08x>\n",
 453                          le32_to_cpu(ndp16->dwSignature));
 454                goto err_ndp;
 455
 456        }
 457
 458        dpe16 = ndp16->dpe16;
 459        for (x = 0; x < nframes; x++, dpe16++) {
 460                offset = le16_to_cpu(dpe16->wDatagramIndex);
 461                len = le16_to_cpu(dpe16->wDatagramLength);
 462
 463                /*
 464                 * CDC NCM ch. 3.7
 465                 * All entries after first NULL entry are to be ignored
 466                 */
 467                if ((offset == 0) || (len == 0)) {
 468                        if (!x)
 469                                goto err_ndp; /* empty NTB */
 470                        break;
 471                }
 472
 473                /* sanity checking */
 474                if (((offset + len) > skb_in->len) || (len > ctx->rx_max)) {
 475                        netif_dbg(dev, rx_err, dev->net,
 476                                  "invalid frame detected (ignored) offset[%u]=%u, length=%u, skb=%p\n",
 477                                  x, offset, len, skb_in);
 478                        if (!x)
 479                                goto err_ndp;
 480                        break;
 481                } else {
 482                        skb = cdc_mbim_process_dgram(dev, skb_in->data + offset, len, tci);
 483                        if (!skb)
 484                                goto error;
 485                        usbnet_skb_return(dev, skb);
 486                        payload += len; /* count payload bytes in this NTB */
 487                }
 488        }
 489err_ndp:
 490        /* are there more NDPs to process? */
 491        ndpoffset = le16_to_cpu(ndp16->wNextNdpIndex);
 492        if (ndpoffset && loopcount--)
 493                goto next_ndp;
 494
 495        /* update stats */
 496        ctx->rx_overhead += skb_in->len - payload;
 497        ctx->rx_ntbs++;
 498
 499        return 1;
 500error:
 501        return 0;
 502}
 503
 504static int cdc_mbim_suspend(struct usb_interface *intf, pm_message_t message)
 505{
 506        int ret = -ENODEV;
 507        struct usbnet *dev = usb_get_intfdata(intf);
 508        struct cdc_mbim_state *info = (void *)&dev->data;
 509        struct cdc_ncm_ctx *ctx = info->ctx;
 510
 511        if (!ctx)
 512                goto error;
 513
 514        /*
 515         * Both usbnet_suspend() and subdriver->suspend() MUST return 0
 516         * in system sleep context, otherwise, the resume callback has
 517         * to recover device from previous suspend failure.
 518         */
 519        ret = usbnet_suspend(intf, message);
 520        if (ret < 0)
 521                goto error;
 522
 523        if (intf == ctx->control && info->subdriver && info->subdriver->suspend)
 524                ret = info->subdriver->suspend(intf, message);
 525        if (ret < 0)
 526                usbnet_resume(intf);
 527
 528error:
 529        return ret;
 530}
 531
 532static int cdc_mbim_resume(struct usb_interface *intf)
 533{
 534        int  ret = 0;
 535        struct usbnet *dev = usb_get_intfdata(intf);
 536        struct cdc_mbim_state *info = (void *)&dev->data;
 537        struct cdc_ncm_ctx *ctx = info->ctx;
 538        bool callsub = (intf == ctx->control && info->subdriver && info->subdriver->resume);
 539
 540        if (callsub)
 541                ret = info->subdriver->resume(intf);
 542        if (ret < 0)
 543                goto err;
 544        ret = usbnet_resume(intf);
 545        if (ret < 0 && callsub)
 546                info->subdriver->suspend(intf, PMSG_SUSPEND);
 547err:
 548        return ret;
 549}
 550
 551static const struct driver_info cdc_mbim_info = {
 552        .description = "CDC MBIM",
 553        .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
 554        .bind = cdc_mbim_bind,
 555        .unbind = cdc_mbim_unbind,
 556        .manage_power = cdc_mbim_manage_power,
 557        .rx_fixup = cdc_mbim_rx_fixup,
 558        .tx_fixup = cdc_mbim_tx_fixup,
 559};
 560
 561/* MBIM and NCM devices should not need a ZLP after NTBs with
 562 * dwNtbOutMaxSize length. Nevertheless, a number of devices from
 563 * different vendor IDs will fail unless we send ZLPs, forcing us
 564 * to make this the default.
 565 *
 566 * This default may cause a performance penalty for spec conforming
 567 * devices wanting to take advantage of optimizations possible without
 568 * ZLPs.  A whitelist is added in an attempt to avoid this for devices
 569 * known to conform to the MBIM specification.
 570 *
 571 * All known devices supporting NCM compatibility mode are also
 572 * conforming to the NCM and MBIM specifications. For this reason, the
 573 * NCM subclass entry is also in the ZLP whitelist.
 574 */
 575static const struct driver_info cdc_mbim_info_zlp = {
 576        .description = "CDC MBIM",
 577        .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
 578        .bind = cdc_mbim_bind,
 579        .unbind = cdc_mbim_unbind,
 580        .manage_power = cdc_mbim_manage_power,
 581        .rx_fixup = cdc_mbim_rx_fixup,
 582        .tx_fixup = cdc_mbim_tx_fixup,
 583};
 584
 585/* The spefication explicitly allows NDPs to be placed anywhere in the
 586 * frame, but some devices fail unless the NDP is placed after the IP
 587 * packets.  Using the CDC_NCM_FLAG_NDP_TO_END flags to force this
 588 * behaviour.
 589 *
 590 * Note: The current implementation of this feature restricts each NTB
 591 * to a single NDP, implying that multiplexed sessions cannot share an
 592 * NTB. This might affect performance for multiplexed sessions.
 593 */
 594static const struct driver_info cdc_mbim_info_ndp_to_end = {
 595        .description = "CDC MBIM",
 596        .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
 597        .bind = cdc_mbim_bind,
 598        .unbind = cdc_mbim_unbind,
 599        .manage_power = cdc_mbim_manage_power,
 600        .rx_fixup = cdc_mbim_rx_fixup,
 601        .tx_fixup = cdc_mbim_tx_fixup,
 602        .data = CDC_NCM_FLAG_NDP_TO_END,
 603};
 604
 605/* Some modems (e.g. Telit LE922A6) do not work properly with altsetting
 606 * toggle done in cdc_ncm_bind_common. CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE
 607 * flag is used to avoid this procedure.
 608 */
 609static const struct driver_info cdc_mbim_info_avoid_altsetting_toggle = {
 610        .description = "CDC MBIM",
 611        .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
 612        .bind = cdc_mbim_bind,
 613        .unbind = cdc_mbim_unbind,
 614        .manage_power = cdc_mbim_manage_power,
 615        .rx_fixup = cdc_mbim_rx_fixup,
 616        .tx_fixup = cdc_mbim_tx_fixup,
 617        .data = CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE,
 618};
 619
 620static const struct usb_device_id mbim_devs[] = {
 621        /* This duplicate NCM entry is intentional. MBIM devices can
 622         * be disguised as NCM by default, and this is necessary to
 623         * allow us to bind the correct driver_info to such devices.
 624         *
 625         * bind() will sort out this for us, selecting the correct
 626         * entry and reject the other
 627         */
 628        { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
 629          .driver_info = (unsigned long)&cdc_mbim_info,
 630        },
 631        /* ZLP conformance whitelist: All Ericsson MBIM devices */
 632        { USB_VENDOR_AND_INTERFACE_INFO(0x0bdb, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 633          .driver_info = (unsigned long)&cdc_mbim_info,
 634        },
 635
 636        /* Some Huawei devices, ME906s-158 (12d1:15c1) and E3372
 637         * (12d1:157d), are known to fail unless the NDP is placed
 638         * after the IP packets.  Applying the quirk to all Huawei
 639         * devices is broader than necessary, but harmless.
 640         */
 641        { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 642          .driver_info = (unsigned long)&cdc_mbim_info_ndp_to_end,
 643        },
 644
 645        /* The HP lt4132 (03f0:a31d) is a rebranded Huawei ME906s-158,
 646         * therefore it too requires the above "NDP to end" quirk.
 647         */
 648        { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 649          .driver_info = (unsigned long)&cdc_mbim_info_ndp_to_end,
 650        },
 651
 652        /* Telit LE922A6 in MBIM composition */
 653        { USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1041, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 654          .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
 655        },
 656
 657        /* Telit LN920 */
 658        { USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1061, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 659          .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
 660        },
 661
 662        /* default entry */
 663        { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 664          .driver_info = (unsigned long)&cdc_mbim_info_zlp,
 665        },
 666        {
 667        },
 668};
 669MODULE_DEVICE_TABLE(usb, mbim_devs);
 670
 671static struct usb_driver cdc_mbim_driver = {
 672        .name = "cdc_mbim",
 673        .id_table = mbim_devs,
 674        .probe = usbnet_probe,
 675        .disconnect = usbnet_disconnect,
 676        .suspend = cdc_mbim_suspend,
 677        .resume = cdc_mbim_resume,
 678        .reset_resume = cdc_mbim_resume,
 679        .supports_autosuspend = 1,
 680        .disable_hub_initiated_lpm = 1,
 681};
 682module_usb_driver(cdc_mbim_driver);
 683
 684MODULE_AUTHOR("Greg Suarez <gsuarez@smithmicro.com>");
 685MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
 686MODULE_DESCRIPTION("USB CDC MBIM host driver");
 687MODULE_LICENSE("GPL");
 688