linux/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2011 Broadcom Corporation
   3 *
   4 * Permission to use, copy, modify, and/or distribute this software for any
   5 * purpose with or without fee is hereby granted, provided that the above
   6 * copyright notice and this permission notice appear in all copies.
   7 *
   8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15 */
  16
  17#include <linux/delay.h>
  18#include <linux/io.h>
  19
  20#include <brcm_hw_ids.h>
  21#include <chipcommon.h>
  22#include <brcmu_utils.h>
  23#include "pub.h"
  24#include "aiutils.h"
  25#include "pmu.h"
  26#include "soc.h"
  27
  28/*
  29 * external LPO crystal frequency
  30 */
  31#define EXT_ILP_HZ 32768
  32
  33/*
  34 * Duration for ILP clock frequency measurment in milliseconds
  35 *
  36 * remark: 1000 must be an integer multiple of this duration
  37 */
  38#define ILP_CALC_DUR    10
  39
  40/* Fields in pmucontrol */
  41#define PCTL_ILP_DIV_MASK       0xffff0000
  42#define PCTL_ILP_DIV_SHIFT      16
  43#define PCTL_PLL_PLLCTL_UPD     0x00000400      /* rev 2 */
  44#define PCTL_NOILP_ON_WAIT      0x00000200      /* rev 1 */
  45#define PCTL_HT_REQ_EN          0x00000100
  46#define PCTL_ALP_REQ_EN         0x00000080
  47#define PCTL_XTALFREQ_MASK      0x0000007c
  48#define PCTL_XTALFREQ_SHIFT     2
  49#define PCTL_ILP_DIV_EN         0x00000002
  50#define PCTL_LPO_SEL            0x00000001
  51
  52/* ILP clock */
  53#define ILP_CLOCK               32000
  54
  55/* ALP clock on pre-PMU chips */
  56#define ALP_CLOCK               20000000
  57
  58/* pmustatus */
  59#define PST_EXTLPOAVAIL 0x0100
  60#define PST_WDRESET     0x0080
  61#define PST_INTPEND     0x0040
  62#define PST_SBCLKST     0x0030
  63#define PST_SBCLKST_ILP 0x0010
  64#define PST_SBCLKST_ALP 0x0020
  65#define PST_SBCLKST_HT  0x0030
  66#define PST_ALPAVAIL    0x0008
  67#define PST_HTAVAIL     0x0004
  68#define PST_RESINIT     0x0003
  69
  70/* PMU resource bit position */
  71#define PMURES_BIT(bit) (1 << (bit))
  72
  73/* PMU corerev and chip specific PLL controls.
  74 * PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary
  75 * number to differentiate different PLLs controlled by the same PMU rev.
  76 */
  77
  78/* pmu XtalFreqRatio */
  79#define PMU_XTALFREQ_REG_ILPCTR_MASK    0x00001FFF
  80#define PMU_XTALFREQ_REG_MEASURE_MASK   0x80000000
  81#define PMU_XTALFREQ_REG_MEASURE_SHIFT  31
  82
  83/* 4313 resources */
  84#define RES4313_BB_PU_RSRC              0
  85#define RES4313_ILP_REQ_RSRC            1
  86#define RES4313_XTAL_PU_RSRC            2
  87#define RES4313_ALP_AVAIL_RSRC          3
  88#define RES4313_RADIO_PU_RSRC           4
  89#define RES4313_BG_PU_RSRC              5
  90#define RES4313_VREG1P4_PU_RSRC         6
  91#define RES4313_AFE_PWRSW_RSRC          7
  92#define RES4313_RX_PWRSW_RSRC           8
  93#define RES4313_TX_PWRSW_RSRC           9
  94#define RES4313_BB_PWRSW_RSRC           10
  95#define RES4313_SYNTH_PWRSW_RSRC        11
  96#define RES4313_MISC_PWRSW_RSRC         12
  97#define RES4313_BB_PLL_PWRSW_RSRC       13
  98#define RES4313_HT_AVAIL_RSRC           14
  99#define RES4313_MACPHY_CLK_AVAIL_RSRC   15
 100
 101u16 si_pmu_fast_pwrup_delay(struct si_pub *sih)
 102{
 103        uint delay = PMU_MAX_TRANSITION_DLY;
 104
 105        switch (ai_get_chip_id(sih)) {
 106        case BCMA_CHIP_ID_BCM43224:
 107        case BCMA_CHIP_ID_BCM43225:
 108        case BCMA_CHIP_ID_BCM4313:
 109                delay = 3700;
 110                break;
 111        default:
 112                break;
 113        }
 114
 115        return (u16) delay;
 116}
 117
 118u32 si_pmu_measure_alpclk(struct si_pub *sih)
 119{
 120        struct si_info *sii = container_of(sih, struct si_info, pub);
 121        struct bcma_device *core;
 122        u32 alp_khz;
 123
 124        if (ai_get_pmurev(sih) < 10)
 125                return 0;
 126
 127        /* Remember original core before switch to chipc */
 128        core = sii->icbus->drv_cc.core;
 129
 130        if (bcma_read32(core, CHIPCREGOFFS(pmustatus)) & PST_EXTLPOAVAIL) {
 131                u32 ilp_ctr, alp_hz;
 132
 133                /*
 134                 * Enable the reg to measure the freq,
 135                 * in case it was disabled before
 136                 */
 137                bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq),
 138                            1U << PMU_XTALFREQ_REG_MEASURE_SHIFT);
 139
 140                /* Delay for well over 4 ILP clocks */
 141                udelay(1000);
 142
 143                /* Read the latched number of ALP ticks per 4 ILP ticks */
 144                ilp_ctr = bcma_read32(core, CHIPCREGOFFS(pmu_xtalfreq)) &
 145                          PMU_XTALFREQ_REG_ILPCTR_MASK;
 146
 147                /*
 148                 * Turn off the PMU_XTALFREQ_REG_MEASURE_SHIFT
 149                 * bit to save power
 150                 */
 151                bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), 0);
 152
 153                /* Calculate ALP frequency */
 154                alp_hz = (ilp_ctr * EXT_ILP_HZ) / 4;
 155
 156                /*
 157                 * Round to nearest 100KHz, and at
 158                 * the same time convert to KHz
 159                 */
 160                alp_khz = (alp_hz + 50000) / 100000 * 100;
 161        } else
 162                alp_khz = 0;
 163
 164        return alp_khz;
 165}
 166