// SPDX-License-Identifier: GPL-2.0
/*
 * Implement cfg80211 ("iw") support.
 *
 * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany
 * Holger Schurig <hs4233@mail.mn-solutions.de>
 *
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/hardirq.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/slab.h>
#include <linux/ieee80211.h>
#include <net/cfg80211.h>
#include <asm/unaligned.h>

#include "decl.h"
#include "cfg.h"
#include "cmd.h"
#include "mesh.h"


#define CHAN2G(_channel, _freq, _flags) {        \
        .band             = NL80211_BAND_2GHZ, \
        .center_freq      = (_freq),             \
        .hw_value         = (_channel),          \
        .flags            = (_flags),            \
        .max_antenna_gain = 0,                   \
        .max_power        = 30,                  \
}

static struct ieee80211_channel lbs_2ghz_channels[] = {
        CHAN2G(1,  2412, 0),
        CHAN2G(2,  2417, 0),
        CHAN2G(3,  2422, 0),
        CHAN2G(4,  2427, 0),
        CHAN2G(5,  2432, 0),
        CHAN2G(6,  2437, 0),
        CHAN2G(7,  2442, 0),
        CHAN2G(8,  2447, 0),
        CHAN2G(9,  2452, 0),
        CHAN2G(10, 2457, 0),
        CHAN2G(11, 2462, 0),
        CHAN2G(12, 2467, 0),
        CHAN2G(13, 2472, 0),
        CHAN2G(14, 2484, 0),
};

#define RATETAB_ENT(_rate, _hw_value, _flags) { \
        .bitrate  = (_rate),                    \
        .hw_value = (_hw_value),                \
        .flags    = (_flags),                   \
}


/* Table 6 in section 3.2.1.1 */
static struct ieee80211_rate lbs_rates[] = {
        RATETAB_ENT(10,  0,  0),
        RATETAB_ENT(20,  1,  0),
        RATETAB_ENT(55,  2,  0),
        RATETAB_ENT(110, 3,  0),
        RATETAB_ENT(60,  9,  0),
        RATETAB_ENT(90,  6,  0),
        RATETAB_ENT(120, 7,  0),
        RATETAB_ENT(180, 8,  0),
        RATETAB_ENT(240, 9,  0),
        RATETAB_ENT(360, 10, 0),
        RATETAB_ENT(480, 11, 0),
        RATETAB_ENT(540, 12, 0),
};

static struct ieee80211_supported_band lbs_band_2ghz = {
        .channels = lbs_2ghz_channels,
        .n_channels = ARRAY_SIZE(lbs_2ghz_channels),
        .bitrates = lbs_rates,
        .n_bitrates = ARRAY_SIZE(lbs_rates),
};


static const u32 cipher_suites[] = {
        WLAN_CIPHER_SUITE_WEP40,
        WLAN_CIPHER_SUITE_WEP104,
        WLAN_CIPHER_SUITE_TKIP,
        WLAN_CIPHER_SUITE_CCMP,
};

/* Time to stay on the channel */
#define LBS_DWELL_PASSIVE 100
#define LBS_DWELL_ACTIVE  40


/***************************************************************************
 * Misc utility functions
 *
 * TLVs are Marvell specific. They are very similar to IEs, they have the
 * same structure: type, length, data*. The only difference: for IEs, the
 * type and length are u8, but for TLVs they're __le16.
 */

/*
 * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1
 * in the firmware spec
 */
static int lbs_auth_to_authtype(enum nl80211_auth_type auth_type)
{
        int ret = -ENOTSUPP;

        switch (auth_type) {
        case NL80211_AUTHTYPE_OPEN_SYSTEM:
        case NL80211_AUTHTYPE_SHARED_KEY:
                ret = auth_type;
                break;
        case NL80211_AUTHTYPE_AUTOMATIC:
                ret = NL80211_AUTHTYPE_OPEN_SYSTEM;
                break;
        case NL80211_AUTHTYPE_NETWORK_EAP:
                ret = 0x80;
                break;
        default:
                /* silence compiler */
                break;
        }
        return ret;
}


/*
 * Various firmware commands need the list of supported rates, but with
 * the hight-bit set for basic rates
 */
static int lbs_add_rates(u8 *rates)
{
        size_t i;

        for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) {
                u8 rate = lbs_rates[i].bitrate / 5;
                if (rate == 0x02 || rate == 0x04 ||
                    rate == 0x0b || rate == 0x16)
                        rate |= 0x80;
                rates[i] = rate;
        }
        return ARRAY_SIZE(lbs_rates);
}


/***************************************************************************
 * TLV utility functions
 *
 * TLVs are Marvell specific. They are very similar to IEs, they have the
 * same structure: type, length, data*. The only difference: for IEs, the
 * type and length are u8, but for TLVs they're __le16.
 */


/*
 * Add ssid TLV
 */
#define LBS_MAX_SSID_TLV_SIZE                   \
        (sizeof(struct mrvl_ie_header)          \
         + IEEE80211_MAX_SSID_LEN)

static int lbs_add_ssid_tlv(u8 *tlv, const u8 *ssid, int ssid_len)
{
        struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv;

        /*
         * TLV-ID SSID  00 00
         * length       06 00
         * ssid         4d 4e 54 45 53 54
         */
        ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID);
        ssid_tlv->header.len = cpu_to_le16(ssid_len);
        memcpy(ssid_tlv->ssid, ssid, ssid_len);
        return sizeof(ssid_tlv->header) + ssid_len;
}


/*
 * Add channel list TLV (section 8.4.2)
 *
 * Actual channel data comes from priv->wdev->wiphy->channels.
 */
#define LBS_MAX_CHANNEL_LIST_TLV_SIZE                                   \
        (sizeof(struct mrvl_ie_header)                                  \
         + (LBS_SCAN_BEFORE_NAP * sizeof(struct chanscanparamset)))

static int lbs_add_channel_list_tlv(struct lbs_private *priv, u8 *tlv,
                                    int last_channel, int active_scan)
{
        int chanscanparamsize = sizeof(struct chanscanparamset) *
                (last_channel - priv->scan_channel);

        struct mrvl_ie_header *header = (void *) tlv;

        /*
         * TLV-ID CHANLIST  01 01
         * length           0e 00
         * channel          00 01 00 00 00 64 00
         *   radio type     00
         *   channel           01
         *   scan type            00
         *   min scan time           00 00
         *   max scan time                 64 00
         * channel 2        00 02 00 00 00 64 00
         *
         */

        header->type = cpu_to_le16(TLV_TYPE_CHANLIST);
        header->len  = cpu_to_le16(chanscanparamsize);
        tlv += sizeof(struct mrvl_ie_header);

        /* lbs_deb_scan("scan: channels %d to %d\n", priv->scan_channel,
                     last_channel); */
        memset(tlv, 0, chanscanparamsize);

        while (priv->scan_channel < last_channel) {
                struct chanscanparamset *param = (void *) tlv;

                param->radiotype = CMD_SCAN_RADIO_TYPE_BG;
                param->channumber =
                        priv->scan_req->channels[priv->scan_channel]->hw_value;
                if (active_scan) {
                        param->maxscantime = cpu_to_le16(LBS_DWELL_ACTIVE);
                } else {
                        param->chanscanmode.passivescan = 1;
                        param->maxscantime = cpu_to_le16(LBS_DWELL_PASSIVE);
                }
                tlv += sizeof(struct chanscanparamset);
                priv->scan_channel++;
        }
        return sizeof(struct mrvl_ie_header) + chanscanparamsize;
}


/*
 * Add rates TLV
 *
 * The rates are in lbs_bg_rates[], but for the 802.11b
 * rates the high bit is set. We add this TLV only because
 * there's a firmware which otherwise doesn't report all
 * APs in range.
 */
#define LBS_MAX_RATES_TLV_SIZE                  \
        (sizeof(struct mrvl_ie_header)          \
         + (ARRAY_SIZE(lbs_rates)))

/* Adds a TLV with all rates the hardware supports */
static int lbs_add_supported_rates_tlv(u8 *tlv)
{
        size_t i;
        struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv;

        /*
         * TLV-ID RATES  01 00
         * length        0e 00
         * rates         82 84 8b 96 0c 12 18 24 30 48 60 6c
         */
        rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES);
        tlv += sizeof(rate_tlv->header);
        i = lbs_add_rates(tlv);
        tlv += i;
        rate_tlv->header.len = cpu_to_le16(i);
        return sizeof(rate_tlv->header) + i;
}

/* Add common rates from a TLV and return the new end of the TLV */
static u8 *
add_ie_rates(u8 *tlv, const u8 *ie, int *nrates)
{
        int hw, ap, ap_max = ie[1];
        u8 hw_rate;

        if (ap_max > MAX_RATES) {
                lbs_deb_assoc("invalid rates\n");
                return tlv;
        }
        /* Advance past IE header */
        ie += 2;

        lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max);

        for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) {
                hw_rate = lbs_rates[hw].bitrate / 5;
                for (ap = 0; ap < ap_max; ap++) {
                        if (hw_rate == (ie[ap] & 0x7f)) {
                                *tlv++ = ie[ap];
                                *nrates = *nrates + 1;
                        }
                }
        }
        return tlv;
}

/*
 * Adds a TLV with all rates the hardware *and* BSS supports.
 */
static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss)
{
        struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv;
        const u8 *rates_eid, *ext_rates_eid;
        int n = 0;

        rcu_read_lock();
        rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES);
        ext_rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_EXT_SUPP_RATES);

        /*
         * 01 00                   TLV_TYPE_RATES
         * 04 00                   len
         * 82 84 8b 96             rates
         */
        rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES);
        tlv += sizeof(rate_tlv->header);

        /* Add basic rates */
        if (rates_eid) {
                tlv = add_ie_rates(tlv, rates_eid, &n);

                /* Add extended rates, if any */
                if (ext_rates_eid)
                        tlv = add_ie_rates(tlv, ext_rates_eid, &n);
        } else {
                lbs_deb_assoc("assoc: bss had no basic rate IE\n");
                /* Fallback: add basic 802.11b rates */
                *tlv++ = 0x82;
                *tlv++ = 0x84;
                *tlv++ = 0x8b;
                *tlv++ = 0x96;
                n = 4;
        }
        rcu_read_unlock();

        rate_tlv->header.len = cpu_to_le16(n);
        return sizeof(rate_tlv->header) + n;
}


/*
 * Add auth type TLV.
 *
 * This is only needed for newer firmware (V9 and up).
 */
#define LBS_MAX_AUTH_TYPE_TLV_SIZE \
        sizeof(struct mrvl_ie_auth_type)

static int lbs_add_auth_type_tlv(u8 *tlv, enum nl80211_auth_type auth_type)
{
        struct mrvl_ie_auth_type *auth = (void *) tlv;

        /*
         * 1f 01  TLV_TYPE_AUTH_TYPE
         * 01 00  len
         * 01     auth type
         */
        auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE);
        auth->header.len = cpu_to_le16(sizeof(*auth)-sizeof(auth->header));
        auth->auth = cpu_to_le16(lbs_auth_to_authtype(auth_type));
        return sizeof(*auth);
}


/*
 * Add channel (phy ds) TLV
 */
#define LBS_MAX_CHANNEL_TLV_SIZE \
        sizeof(struct mrvl_ie_header)

static int lbs_add_channel_tlv(u8 *tlv, u8 channel)
{
        struct mrvl_ie_ds_param_set *ds = (void *) tlv;

        /*
         * 03 00  TLV_TYPE_PHY_DS
         * 01 00  len
         * 06     channel
         */
        ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS);
        ds->header.len = cpu_to_le16(sizeof(*ds)-sizeof(ds->header));
        ds->channel = channel;
        return sizeof(*ds);
}


/*
 * Add (empty) CF param TLV of the form:
 */
#define LBS_MAX_CF_PARAM_TLV_SIZE               \
        sizeof(struct mrvl_ie_header)

static int lbs_add_cf_param_tlv(u8 *tlv)
{
        struct mrvl_ie_cf_param_set *cf = (void *)tlv;

        /*
         * 04 00  TLV_TYPE_CF
         * 06 00  len
         * 00     cfpcnt
         * 00     cfpperiod
         * 00 00  cfpmaxduration
         * 00 00  cfpdurationremaining
         */
        cf->header.type = cpu_to_le16(TLV_TYPE_CF);
        cf->header.len = cpu_to_le16(sizeof(*cf)-sizeof(cf->header));
        return sizeof(*cf);
}

/*
 * Add WPA TLV
 */
#define LBS_MAX_WPA_TLV_SIZE                    \
        (sizeof(struct mrvl_ie_header)          \
         + 128 /* TODO: I guessed the size */)

static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len)
{
        size_t tlv_len;

        /*
         * We need just convert an IE to an TLV. IEs use u8 for the header,
         *   u8      type
         *   u8      len
         *   u8[]    data
         * but TLVs use __le16 instead:
         *   __le16  type
         *   __le16  len
         *   u8[]    data
         */
        *tlv++ = *ie++;
        *tlv++ = 0;
        tlv_len = *tlv++ = *ie++;
        *tlv++ = 0;
        while (tlv_len--)
                *tlv++ = *ie++;
        /* the TLV is two bytes larger than the IE */
        return ie_len + 2;
}

/*
 * Set Channel
 */

static int lbs_cfg_set_monitor_channel(struct wiphy *wiphy,
                                       struct cfg80211_chan_def *chandef)
{
        struct lbs_private *priv = wiphy_priv(wiphy);
        int ret = -ENOTSUPP;

        if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT)
                goto out;

        ret = lbs_set_channel(priv, chandef->chan->hw_value);

 out:
        return ret;
}

static int lbs_cfg_set_mesh_channel(struct wiphy *wiphy,
                                    struct net_device *netdev,
                                    struct ieee80211_channel *channel)
{
        struct lbs_private *priv = wiphy_priv(wiphy);
        int ret = -ENOTSUPP;

        if (netdev != priv->mesh_dev)
                goto out;

        ret = lbs_mesh_set_channel(priv, channel->hw_value);

 out:
        return ret;
}



/*
 * Scanning
 */

/*
 * When scanning, the firmware doesn't send a nul packet with the power-safe
 * bit to the AP. So we cannot stay away from our current channel too long,
 * otherwise we loose data. So take a "nap" while scanning every other
 * while.
 */
#define LBS_SCAN_BEFORE_NAP 4


/*
 * When the firmware reports back a scan-result, it gives us an "u8 rssi",
 * which isn't really an RSSI, as it becomes larger when moving away from
 * the AP. Anyway, we need to convert that into mBm.
 */
#define LBS_SCAN_RSSI_TO_MBM(rssi) \
        ((-(int)rssi + 3)*100)

static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
        struct cmd_header *resp)
{
        struct cfg80211_bss *bss;
        struct cmd_ds_802_11_scan_rsp *scanresp = (void *)resp;
        int bsssize;
        const u8 *pos;
        const u8 *tsfdesc;
        int tsfsize;
        int i;
        int ret = -EILSEQ;

        bsssize = get_unaligned_le16(&scanresp->bssdescriptsize);

        lbs_deb_scan("scan response: %d BSSs (%d bytes); resp size %d bytes\n",
                        scanresp->nr_sets, bsssize, le16_to_cpu(resp->size));

        if (scanresp->nr_sets == 0) {
                ret = 0;
                goto done;
        }

        /*
         * The general layout of the scan response is described in chapter
         * 5.7.1. Basically we have a common part, then any number of BSS
         * descriptor sections. Finally we have section with the same number
         * of TSFs.
         *
         * cmd_ds_802_11_scan_rsp
         *   cmd_header
         *   pos_size
         *   nr_sets
         *   bssdesc 1
         *     bssid
         *     rssi
         *     timestamp
         *     intvl
         *     capa
         *     IEs
         *   bssdesc 2
         *   bssdesc n
         *   MrvlIEtypes_TsfFimestamp_t
         *     TSF for BSS 1
         *     TSF for BSS 2
         *     TSF for BSS n
         */

        pos = scanresp->bssdesc_and_tlvbuffer;

        lbs_deb_hex(LBS_DEB_SCAN, "SCAN_RSP", scanresp->bssdesc_and_tlvbuffer,
                        scanresp->bssdescriptsize);

        tsfdesc = pos + bsssize;
        tsfsize = 4 + 8 * scanresp->nr_sets;
        lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TSF", (u8 *) tsfdesc, tsfsize);

        /* Validity check: we expect a Marvell-Local TLV */
        i = get_unaligned_le16(tsfdesc);
        tsfdesc += 2;
        if (i != TLV_TYPE_TSFTIMESTAMP) {
                lbs_deb_scan("scan response: invalid TSF Timestamp %d\n", i);
                goto done;
        }

        /*
         * Validity check: the TLV holds TSF values with 8 bytes each, so
         * the size in the TLV must match the nr_sets value
         */
        i = get_unaligned_le16(tsfdesc);
        tsfdesc += 2;
        if (i / 8 != scanresp->nr_sets) {
                lbs_deb_scan("scan response: invalid number of TSF timestamp "
                             "sets (expected %d got %d)\n", scanresp->nr_sets,
                             i / 8);
                goto done;
        }

        for (i = 0; i < scanresp->nr_sets; i++) {
                const u8 *bssid;
                const u8 *ie;
                int left;
                int ielen;
                int rssi;
                u16 intvl;
                u16 capa;
                int chan_no = -1;
                const u8 *ssid = NULL;
                u8 ssid_len = 0;

                int len = get_unaligned_le16(pos);
                pos += 2;

                /* BSSID */
                bssid = pos;
                pos += ETH_ALEN;
                /* RSSI */
                rssi = *pos++;
                /* Packet time stamp */
                pos += 8;
                /* Beacon interval */
                intvl = get_unaligned_le16(pos);
                pos += 2;
                /* Capabilities */
                capa = get_unaligned_le16(pos);
                pos += 2;

                /* To find out the channel, we must parse the IEs */
                ie = pos;
                /*
                 * 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon
                 * interval, capabilities
                 */
                ielen = left = len - (6 + 1 + 8 + 2 + 2);
                while (left >= 2) {
                        u8 id, elen;
                        id = *pos++;
                        elen = *pos++;
                        left -= 2;
                        if (elen > left) {
                                lbs_deb_scan("scan response: invalid IE fmt\n");
                                goto done;
                        }

                        if (id == WLAN_EID_DS_PARAMS)
                                chan_no = *pos;
                        if (id == WLAN_EID_SSID) {
                                ssid = pos;
                                ssid_len = elen;
                        }
                        left -= elen;
                        pos += elen;
                }

                /* No channel, no luck */
                if (chan_no != -1) {
                        struct wiphy *wiphy = priv->wdev->wiphy;
                        int freq = ieee80211_channel_to_frequency(chan_no,
                                                        NL80211_BAND_2GHZ);
                        struct ieee80211_channel *channel =
                                ieee80211_get_channel(wiphy, freq);

                        lbs_deb_scan("scan: %pM, capa %04x, chan %2d, %*pE, %d dBm\n",
                                     bssid, capa, chan_no, ssid_len, ssid,
                                     LBS_SCAN_RSSI_TO_MBM(rssi)/100);

                        if (channel &&
                            !(channel->flags & IEEE80211_CHAN_DISABLED)) {
                                bss = cfg80211_inform_bss(wiphy, channel,
                                        CFG80211_BSS_FTYPE_UNKNOWN,
                                        bssid, get_unaligned_le64(tsfdesc),
                                        capa, intvl, ie, ielen,
                                        LBS_SCAN_RSSI_TO_MBM(rssi),
                                        GFP_KERNEL);
                                cfg80211_put_bss(wiphy, bss);
                        }
                } else
                        lbs_deb_scan("scan response: missing BSS channel IE\n");

                tsfdesc += 8;
        }
        ret = 0;

 done:
        return ret;
}


/*
 * Our scan command contains a TLV, consting of a SSID TLV, a channel list
 * TLV and a rates TLV. Determine the maximum size of them:
 */
#define LBS_SCAN_MAX_CMD_SIZE                   \
        (sizeof(struct cmd_ds_802_11_scan)      \
         + LBS_MAX_SSID_TLV_SIZE                \
         + LBS_MAX_CHANNEL_LIST_TLV_SIZE        \
         + LBS_MAX_RATES_TLV_SIZE)

/*
 * Assumes priv->scan_req is initialized and valid
 * Assumes priv->scan_channel is initialized
 */
static void lbs_scan_worker(struct work_struct *work)
{
        struct lbs_private *priv =
                container_of(work, struct lbs_private, scan_work.work);
        struct cmd_ds_802_11_scan *scan_cmd;
        u8 *tlv; /* pointer into our current, growing TLV storage area */
        int last_channel;
        int running, carrier;

        scan_cmd = kzalloc(LBS_SCAN_MAX_CMD_SIZE, GFP_KERNEL);
        if (scan_cmd == NULL)
                return;

        /* prepare fixed part of scan command */
        scan_cmd->bsstype = CMD_BSS_TYPE_ANY;

        /* stop network while we're away from our main channel */
        running = !netif_queue_stopped(priv->dev);
        carrier = netif_carrier_ok(priv->dev);
        if (running)
                netif_stop_queue(priv->dev);
        if (carrier)
                netif_carrier_off(priv->dev);

        /* prepare fixed part of scan command */
        tlv = scan_cmd->tlvbuffer;

        /* add SSID TLV */
        if (priv->scan_req->n_ssids && priv->scan_req->ssids[0].ssid_len > 0)
                tlv += lbs_add_ssid_tlv(tlv,
                                        priv->scan_req->ssids[0].ssid,
                                        priv->scan_req->ssids[0].ssid_len);

        /* add channel TLVs */
        last_channel = priv->scan_channel + LBS_SCAN_BEFORE_NAP;
        if (last_channel > priv->scan_req->n_channels)
                last_channel = priv->scan_req->n_channels;
        tlv += lbs_add_channel_list_tlv(priv, tlv, last_channel,
                priv->scan_req->n_ssids);

        /* add rates TLV */
        tlv += lbs_add_supported_rates_tlv(tlv);

        if (priv->scan_channel < priv->scan_req->n_channels) {
                cancel_delayed_work(&priv->scan_work);
                if (netif_running(priv->dev))
                        queue_delayed_work(priv->work_thread, &priv->scan_work,
                                msecs_to_jiffies(300));
        }

        /* This is the final data we are about to send */
        scan_cmd->hdr.size = cpu_to_le16(tlv - (u8 *)scan_cmd);
        lbs_deb_hex(LBS_DEB_SCAN, "SCAN_CMD", (void *)scan_cmd,
                    sizeof(*scan_cmd));
        lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TLV", scan_cmd->tlvbuffer,
                    tlv - scan_cmd->tlvbuffer);

        __lbs_cmd(priv, CMD_802_11_SCAN, &scan_cmd->hdr,
                le16_to_cpu(scan_cmd->hdr.size),
                lbs_ret_scan, 0);

        if (priv->scan_channel >= priv->scan_req->n_channels) {
                /* Mark scan done */
                cancel_delayed_work(&priv->scan_work);
                lbs_scan_done(priv);
        }

        /* Restart network */
        if (carrier)
                netif_carrier_on(priv->dev);
        if (running && !priv->tx_pending_len)
                netif_wake_queue(priv->dev);

        kfree(scan_cmd);

        /* Wake up anything waiting on scan completion */
        if (priv->scan_req == NULL) {
                lbs_deb_scan("scan: waking up waiters\n");
                wake_up_all(&priv->scan_q);
        }
}

static void _internal_start_scan(struct lbs_private *priv, bool internal,
        struct cfg80211_scan_request *request)
{
        lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n",
                request->n_ssids, request->n_channels, request->ie_len);

        priv->scan_channel = 0;
        priv->scan_req = request;
        priv->internal_scan = internal;

        queue_delayed_work(priv->work_thread, &priv->scan_work,
                msecs_to_jiffies(50));
}

/*
 * Clean up priv->scan_req.  Should be used to handle the allocation details.
 */
void lbs_scan_done(struct lbs_private *priv)
{
        WARN_ON(!priv->scan_req);

        if (priv->internal_scan) {
                kfree(priv->scan_req);
        } else {
                struct cfg80211_scan_info info = {
                        .aborted = false,
                };

                cfg80211_scan_done(priv->scan_req, &info);
        }

        priv->scan_req = NULL;
}

static int lbs_cfg_scan(struct wiphy *wiphy,
        struct cfg80211_scan_request *request)
{
        struct lbs_private *priv = wiphy_priv(wiphy);
        int ret = 0;

        if (priv->scan_req || delayed_work_pending(&priv->scan_work)) {
                /* old scan request not yet processed */
                ret = -EAGAIN;
                goto out;
        }

        _internal_start_scan(priv, false, request);

        if (priv->surpriseremoved)
                ret = -EIO;

 out:
        return ret;
}




/*
 * Events
 */

void lbs_send_disconnect_notification(struct lbs_private *priv,
                                      bool locally_generated)
{
        cfg80211_disconnected(priv->dev, 0, NULL, 0, locally_generated,
                              GFP_KERNEL);
}

void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event)
{
        cfg80211_michael_mic_failure(priv->dev,
                priv->assoc_bss,
                event == MACREG_INT_CODE_MIC_ERR_MULTICAST ?
                        NL80211_KEYTYPE_GROUP :
                        NL80211_KEYTYPE_PAIRWISE,
                -1,
                NULL,
                GFP_KERNEL);
}




/*
 * Connect/disconnect
 */


/*
 * This removes all WEP keys
 */
static int lbs_remove_wep_keys(struct lbs_private *priv)
{
        struct cmd_ds_802_11_set_wep cmd;
        int ret;

        memset(&cmd, 0, sizeof(cmd));
        cmd.hdr.size = cpu_to_le16(sizeof(cmd));
        cmd.keyindex = cpu_to_le16(priv->wep_tx_key);
        cmd.action = cpu_to_le16(CMD_ACT_REMOVE);

        ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd);

        return ret;
}

/*
 * Set WEP keys
 */
static int lbs_set_wep_keys(struct lbs_private *priv)
{
        struct cmd_ds_802_11_set_wep cmd;
        int i;
        int ret;

        /*
         * command         13 00
         * size            50 00
         * sequence        xx xx
         * result          00 00
         * action          02 00     ACT_ADD
         * transmit key    00 00
         * type for key 1  01        WEP40
         * type for key 2  00
         * type for key 3  00
         * type for key 4  00
         * key 1           39 39 39 39 39 00 00 00
         *                 00 00 00 00 00 00 00 00
         * key 2           00 00 00 00 00 00 00 00
         *                 00 00 00 00 00 00 00 00
         * key 3           00 00 00 00 00 00 00 00
         *                 00 00 00 00 00 00 00 00
         * key 4           00 00 00 00 00 00 00 00
         */
        if (priv->wep_key_len[0] || priv->wep_key_len[1] ||
            priv->wep_key_len[2] || priv->wep_key_len[3]) {
                /* Only set wep keys if we have at least one of them */
                memset(&cmd, 0, sizeof(cmd));
                cmd.hdr.size = cpu_to_le16(sizeof(cmd));
                cmd.keyindex = cpu_to_le16(priv->wep_tx_key);
                cmd.action = cpu_to_le16(CMD_ACT_ADD);

                for (i = 0; i < 4; i++) {
                        switch (priv->wep_key_len[i]) {
                        case WLAN_KEY_LEN_WEP40:
                                cmd.keytype[i] = CMD_TYPE_WEP_40_BIT;
                                break;
                        case WLAN_KEY_LEN_WEP104:
                                cmd.keytype[i] = CMD_TYPE_WEP_104_BIT;
                                break;
                        default:
                                cmd.keytype[i] = 0;
                                break;
                        }
                        memcpy(cmd.keymaterial[i], priv->wep_key[i],
                               priv->wep_key_len[i]);
                }

                ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd);
        } else {
                /* Otherwise remove all wep keys */
                ret = lbs_remove_wep_keys(priv);
        }

        return ret;
}


/*
 * Enable/Disable RSN status
 */
static int lbs_enable_rsn(struct lbs_private *priv, int enable)
{
        struct cmd_ds_802_11_enable_rsn cmd;
        int ret;

        /*
         * cmd       2f 00
         * size      0c 00
         * sequence  xx xx
         * result    00 00
         * action    01 00    ACT_SET
         * enable    01 00
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.hdr.size = cpu_to_le16(sizeof(cmd));
        cmd.action = cpu_to_le16(CMD_ACT_SET);
        cmd.enable = cpu_to_le16(enable);

        ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd);

        return ret;
}


/*
 * Set WPA/WPA key material
 */

/*
 * like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we
 * get rid of WEXT, this should go into host.h
 */

struct cmd_key_material {
        struct cmd_header hdr;

        __le16 action;
        struct MrvlIEtype_keyParamSet param;
} __packed;

static int lbs_set_key_material(struct lbs_private *priv,
                                int key_type, int key_info,
                                const u8 *key, u16 key_len)
{
        struct cmd_key_material cmd;
        int ret;

        /*
         * Example for WPA (TKIP):
         *
         * cmd       5e 00
         * size      34 00
         * sequence  xx xx
         * result    00 00
         * action    01 00
         * TLV type  00 01    key param
         * length    00 26
         * key type  01 00    TKIP
         * key info  06 00    UNICAST | ENABLED
         * key len   20 00
         * key       32 bytes
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.hdr.size = cpu_to_le16(sizeof(cmd));
        cmd.action = cpu_to_le16(CMD_ACT_SET);
        cmd.param.type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL);
        cmd.param.length = cpu_to_le16(sizeof(cmd.param) - 4);

        cmd.param.keytypeid = cpu_to_le16(key_type);
        cmd.param.keyinfo = cpu_to_le16(key_info);
        cmd.param.keylen = cpu_to_le16(key_len);
        if (key && key_len)
                memcpy(cmd.param.key, key, key_len);

        ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd);

        return ret;
}


/*
 * Sets the auth type (open, shared, etc) in the firmware. That
 * we use CMD_802_11_AUTHENTICATE is misleading, this firmware
 * command doesn't send an authentication frame at all, it just
 * stores the auth_type.
 */
static int lbs_set_authtype(struct lbs_private *priv,
                            struct cfg80211_connect_params *sme)
{
        struct cmd_ds_802_11_authenticate cmd;
        int ret;

        /*
         * cmd        11 00
         * size       19 00
         * sequence   xx xx
         * result     00 00
         * BSS id     00 13 19 80 da 30
         * auth type  00
         * reserved   00 00 00 00 00 00 00 00 00 00
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.hdr.size = cpu_to_le16(sizeof(cmd));
        if (sme->bssid)
                memcpy(cmd.bssid, sme->bssid, ETH_ALEN);
        /* convert auth_type */
        ret = lbs_auth_to_authtype(sme->auth_type);
        if (ret < 0)
                goto done;

        cmd.authtype = ret;
        ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd);

 done:
        return ret;
}


/*
 * Create association request
 */
#define LBS_ASSOC_MAX_CMD_SIZE                     \
        (sizeof(struct cmd_ds_802_11_associate)    \
         - 512 /* cmd_ds_802_11_associate.iebuf */ \
         + LBS_MAX_SSID_TLV_SIZE                   \
         + LBS_MAX_CHANNEL_TLV_SIZE                \
         + LBS_MAX_CF_PARAM_TLV_SIZE               \
         + LBS_MAX_AUTH_TYPE_TLV_SIZE              \
         + LBS_MAX_WPA_TLV_SIZE)

static int lbs_associate(struct lbs_private *priv,
                struct cfg80211_bss *bss,
                struct cfg80211_connect_params *sme)
{
        struct cmd_ds_802_11_associate_response *resp;
        struct cmd_ds_802_11_associate *cmd = kzalloc(LBS_ASSOC_MAX_CMD_SIZE,
                                                      GFP_KERNEL);
        const u8 *ssid_eid;
        size_t len, resp_ie_len;
        int status;
        int ret;
        u8 *pos;
        u8 *tmp;

        if (!cmd) {
                ret = -ENOMEM;
                goto done;
        }
        pos = &cmd->iebuf[0];

        /*
         * cmd              50 00
         * length           34 00
         * sequence         xx xx
         * result           00 00
         * BSS id           00 13 19 80 da 30
         * capabilities     11 00
         * listen interval  0a 00
         * beacon interval  00 00
         * DTIM period      00
         * TLVs             xx   (up to 512 bytes)
         */
        cmd->hdr.command = cpu_to_le16(CMD_802_11_ASSOCIATE);

        /* Fill in static fields */
        memcpy(cmd->bssid, bss->bssid, ETH_ALEN);
        cmd->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL);
        cmd->capability = cpu_to_le16(bss->capability);

        /* add SSID TLV */
        rcu_read_lock();
        ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID);
        if (ssid_eid)
                pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_eid[1]);
        else
                lbs_deb_assoc("no SSID\n");
        rcu_read_unlock();

        /* add DS param TLV */
        if (bss->channel)
                pos += lbs_add_channel_tlv(pos, bss->channel->hw_value);
        else
                lbs_deb_assoc("no channel\n");

        /* add (empty) CF param TLV */
        pos += lbs_add_cf_param_tlv(pos);

        /* add rates TLV */
        tmp = pos + 4; /* skip Marvell IE header */
        pos += lbs_add_common_rates_tlv(pos, bss);
        lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp);

        /* add auth type TLV */
        if (MRVL_FW_MAJOR_REV(priv->fwrelease) >= 9)
                pos += lbs_add_auth_type_tlv(pos, sme->auth_type);

        /* add WPA/WPA2 TLV */
        if (sme->ie && sme->ie_len)
                pos += lbs_add_wpa_tlv(pos, sme->ie, sme->ie_len);

        len = (sizeof(*cmd) - sizeof(cmd->iebuf)) +
                (u16)(pos - (u8 *) &cmd->iebuf);
        cmd->hdr.size = cpu_to_le16(len);

        lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_CMD", (u8 *) cmd,
                        le16_to_cpu(cmd->hdr.size));

        /* store for later use */
        memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN);

        ret = lbs_cmd_with_response(priv, CMD_802_11_ASSOCIATE, cmd);
        if (ret)
                goto done;

        /* generate connect message to cfg80211 */

        resp = (void *) cmd; /* recast for easier field access */
        status = le16_to_cpu(resp->statuscode);

        /* Older FW versions map the IEEE 802.11 Status Code in the association
         * response to the following values returned in resp->statuscode:
         *
         *    IEEE Status Code                Marvell Status Code
         *    0                       ->      0x0000 ASSOC_RESULT_SUCCESS
         *    13                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
         *    14                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
         *    15                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
         *    16                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
         *    others                  ->      0x0003 ASSOC_RESULT_REFUSED
         *
         * Other response codes:
         *    0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused)
         *    0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for
         *                                    association response from the AP)
         */
        if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) {
                switch (status) {
                case 0:
                        break;
                case 1:
                        lbs_deb_assoc("invalid association parameters\n");
                        status = WLAN_STATUS_CAPS_UNSUPPORTED;
                        break;
                case 2:
                        lbs_deb_assoc("timer expired while waiting for AP\n");
                        status = WLAN_STATUS_AUTH_TIMEOUT;
                        break;
                case 3:
                        lbs_deb_assoc("association refused by AP\n");
                        status = WLAN_STATUS_ASSOC_DENIED_UNSPEC;
                        break;
                case 4:
                        lbs_deb_assoc("authentication refused by AP\n");
                        status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION;
                        break;
                default:
                        lbs_deb_assoc("association failure %d\n", status);
                        /* v5 OLPC firmware does return the AP status code if
                         * it's not one of the values above.  Let that through.
                         */
                        break;
                }
        }

        lbs_deb_assoc("status %d, statuscode 0x%04x, capability 0x%04x, "
                      "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode),
                      le16_to_cpu(resp->capability), le16_to_cpu(resp->aid));

        resp_ie_len = le16_to_cpu(resp->hdr.size)
                - sizeof(resp->hdr)
                - 6;
        cfg80211_connect_result(priv->dev,
                                priv->assoc_bss,
                                sme->ie, sme->ie_len,
                                resp->iebuf, resp_ie_len,
                                status,
                                GFP_KERNEL);

        if (status == 0) {
                /* TODO: get rid of priv->connect_status */
                priv->connect_status = LBS_CONNECTED;
                netif_carrier_on(priv->dev);
                if (!priv->tx_pending_len)
                        netif_tx_wake_all_queues(priv->dev);
        }

        kfree(cmd);
done:
        return ret;
}

static struct cfg80211_scan_request *
_new_connect_scan_req(struct wiphy *wiphy, struct cfg80211_connect_params *sme)
{
        struct cfg80211_scan_request *creq = NULL;
        int i, n_channels = ieee80211_get_num_supported_channels(wiphy);
        enum nl80211_band band;

        creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) +
                       n_channels * sizeof(void *),
                       GFP_ATOMIC);
        if (!creq)
                return NULL;

        /* SSIDs come after channels */
        creq->ssids = (void *)&creq->channels[n_channels];
        creq->n_channels = n_channels;
        creq->n_ssids = 1;

        /* Scan all available channels */
        i = 0;
        for (band = 0; band < NUM_NL80211_BANDS; band++) {
                int j;

                if (!wiphy->bands[band])
                        continue;

                for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
                        /* ignore disabled channels */
                        if (wiphy->bands[band]->channels[j].flags &
                                                IEEE80211_CHAN_DISABLED)
                                continue;

                        creq->channels[i] = &wiphy->bands[band]->channels[j];
                        i++;
                }
        }
        if (i) {
                /* Set real number of channels specified in creq->channels[] */
                creq->n_channels = i;

                /* Scan for the SSID we're going to connect to */
                memcpy(creq->ssids[0].ssid, sme->ssid, sme->ssid_len);
                creq->ssids[0].ssid_len = sme->ssid_len;
        } else {
                /* No channels found... */
                kfree(creq);
                creq = NULL;
        }

        return creq;
}

static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
                           struct cfg80211_connect_params *sme)
{
        struct lbs_private *priv = wiphy_priv(wiphy);
        struct cfg80211_bss *bss = NULL;
        int ret = 0;
        u8 preamble = RADIO_PREAMBLE_SHORT;

        if (dev == priv->mesh_dev)
                return -EOPNOTSUPP;

        if (!sme->bssid) {
                struct cfg80211_scan_request *creq;

                /*
                 * Scan for the requested network after waiting for existing
                 * scans to finish.
                 */
                lbs_deb_assoc("assoc: waiting for existing scans\n");
                wait_event_interruptible_timeout(priv->scan_q,
                                                 (priv->scan_req == NULL),
                                                 (15 * HZ));

                creq = _new_connect_scan_req(wiphy, sme);
                if (!creq) {
                        ret = -EINVAL;
                        goto done;
                }

                lbs_deb_assoc("assoc: scanning for compatible AP\n");
                _internal_start_scan(priv, true, creq);

                lbs_deb_assoc("assoc: waiting for scan to complete\n");
                wait_event_interruptible_timeout(priv->scan_q,
                                                 (priv->scan_req == NULL),
                                                 (15 * HZ));
                lbs_deb_assoc("assoc: scanning completed\n");
        }

        /* Find the BSS we want using available scan results */
        bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
                sme->ssid, sme->ssid_len, IEEE80211_BSS_TYPE_ESS,
                IEEE80211_PRIVACY_ANY);
        if (!bss) {
                wiphy_err(wiphy, "assoc: bss %pM not in scan results\n",
                          sme->bssid);
                ret = -ENOENT;
                goto done;
        }
        lbs_deb_assoc("trying %pM\n", bss->bssid);
        lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n",
                      sme->crypto.cipher_group,
                      sme->key_idx, sme->key_len);

        /* As this is a new connection, clear locally stored WEP keys */
        priv->wep_tx_key = 0;
        memset(priv->wep_key, 0, sizeof(priv->wep_key));
        memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len));

        /* set/remove WEP keys */
        switch (sme->crypto.cipher_group) {
        case WLAN_CIPHER_SUITE_WEP40:
        case WLAN_CIPHER_SUITE_WEP104:
                /* Store provided WEP keys in priv-> */
                priv->wep_tx_key = sme->key_idx;
                priv->wep_key_len[sme->key_idx] = sme->key_len;
                memcpy(priv->wep_key[sme->key_idx], sme->key, sme->key_len);
                /* Set WEP keys and WEP mode */
                lbs_set_wep_keys(priv);
                priv->mac_control |= CMD_ACT_MAC_WEP_ENABLE;
                lbs_set_mac_control(priv);
                /* No RSN mode for WEP */
                lbs_enable_rsn(priv, 0);
                break;
        case 0: /* there's no WLAN_CIPHER_SUITE_NONE definition */
                /*
                 * If we don't have no WEP, no WPA and no WPA2,
                 * we remove all keys like in the WPA/WPA2 setup,
                 * we just don't set RSN.
                 *
                 * Therefore: fall-through
                 */
        case WLAN_CIPHER_SUITE_TKIP:
        case WLAN_CIPHER_SUITE_CCMP:
                /* Remove WEP keys and WEP mode */
                lbs_remove_wep_keys(priv);
                priv->mac_control &= ~CMD_ACT_MAC_WEP_ENABLE;
                lbs_set_mac_control(priv);

                /* clear the WPA/WPA2 keys */
                lbs_set_key_material(priv,
                        KEY_TYPE_ID_WEP, /* doesn't matter */
                        KEY_INFO_WPA_UNICAST,
                        NULL, 0);
                lbs_set_key_material(priv,
                        KEY_TYPE_ID_WEP, /* doesn't matter */
                        KEY_INFO_WPA_MCAST,
                        NULL, 0);
                /* RSN mode for WPA/WPA2 */
                lbs_enable_rsn(priv, sme->crypto.cipher_group != 0);
                break;
        default:
                wiphy_err(wiphy, "unsupported cipher group 0x%x\n",
                          sme->crypto.cipher_group);
                ret = -ENOTSUPP;
                goto done;
        }

        ret = lbs_set_authtype(priv, sme);
        if (ret == -ENOTSUPP) {
                wiphy_err(wiphy, "unsupported authtype 0x%x\n", sme->auth_type);
                goto done;
        }

        lbs_set_radio(priv, preamble, 1);

        /* Do the actual association */
        ret = lbs_associate(priv, bss, sme);

 done:
        if (bss)
                cfg80211_put_bss(wiphy, bss);
        return ret;
}

int lbs_disconnect(struct lbs_private *priv, u16 reason)
{
        struct cmd_ds_802_11_deauthenticate cmd;
        int ret;

        memset(&cmd, 0, sizeof(cmd));
        cmd.hdr.size = cpu_to_le16(sizeof(cmd));
        /* Mildly ugly to use a locally store my own BSSID ... */
        memcpy(cmd.macaddr, &priv->assoc_bss, ETH_ALEN);
        cmd.reasoncode = cpu_to_le16(reason);

        ret = lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd);
        if (ret)
                return ret;

        cfg80211_disconnected(priv->dev,
                        reason,
                        NULL, 0, true,
                        GFP_KERNEL);
        priv->connect_status = LBS_DISCONNECTED;

        return 0;
}

static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev,
        u16 reason_code)
{
        struct lbs_private *priv = wiphy_priv(wiphy);

        if (dev == priv->mesh_dev)
                return -EOPNOTSUPP;

        /* store for lbs_cfg_ret_disconnect() */
        priv->disassoc_reason = reason_code;

        return lbs_disconnect(priv, reason_code);
}

static int lbs_cfg_set_default_key(struct wiphy *wiphy,
                                   struct net_device *netdev,
                                   u8 key_index, bool unicast,
                                   bool multicast)
{
        struct lbs_private *priv = wiphy_priv(wiphy);

        if (netdev == priv->mesh_dev)
                return -EOPNOTSUPP;

        if (key_index != priv->wep_tx_key) {
                lbs_deb_assoc("set_default_key: to %d\n", key_index);
                priv->wep_tx_key = key_index;
                lbs_set_wep_keys(priv);
        }

        return 0;
}


static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev,
                           u8 idx, bool pairwise, const u8 *mac_addr,
                           struct key_params *params)
{
        struct lbs_private *priv = wiphy_priv(wiphy);
        u16 key_info;
        u16 key_type;
        int ret = 0;

        if (netdev == priv->mesh_dev)
                return -EOPNOTSUPP;

        lbs_deb_assoc("add_key: cipher 0x%x, mac_addr %pM\n",
                      params->cipher, mac_addr);
        lbs_deb_assoc("add_key: key index %d, key len %d\n",
                      idx, params->key_len);
        if (params->key_len)
                lbs_deb_hex(LBS_DEB_CFG80211, "KEY",
                            params->key, params->key_len);

        lbs_deb_assoc("add_key: seq len %d\n", params->seq_len);
        if (params->seq_len)
                lbs_deb_hex(LBS_DEB_CFG80211, "SEQ",
                            params->seq, params->seq_len);

        switch (params->cipher) {
        case WLAN_CIPHER_SUITE_WEP40:
        case WLAN_CIPHER_SUITE_WEP104:
                /* actually compare if something has changed ... */
                if ((priv->wep_key_len[idx] != params->key_len) ||
                        memcmp(priv->wep_key[idx],
                               params->key, params->key_len) != 0) {
                        priv->wep_key_len[idx] = params->key_len;
                        memcpy(priv->wep_key[idx],
                               params->key, params->key_len);
                        lbs_set_wep_keys(priv);
                }
                break;
        case WLAN_CIPHER_SUITE_TKIP:
        case WLAN_CIPHER_SUITE_CCMP:
                key_info = KEY_INFO_WPA_ENABLED | ((idx == 0)
                                                   ? KEY_INFO_WPA_UNICAST
                                                   : KEY_INFO_WPA_MCAST);
                key_type = (params->cipher == WLAN_CIPHER_SUITE_TKIP)
                        ? KEY_TYPE_ID_TKIP
                        : KEY_TYPE_ID_AES;
                lbs_set_key_material(priv,
                                     key_type,
                                     key_info,
                                     params->key, params->key_len);
                break;
        default:
                wiphy_err(wiphy, "unhandled cipher 0x%x\n", params->cipher);
                ret = -ENOTSUPP;
                break;
        }

        return ret;
}


static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev,
                           u8 key_index, bool pairwise, const u8 *mac_addr)
{

        lbs_deb_assoc("del_key: key_idx %d, mac_addr %pM\n",
                      key_index, mac_addr);

#ifdef TODO
        struct lbs_private *priv = wiphy_priv(wiphy);
        /*
         * I think can keep this a NO-OP, because:

         * - we clear all keys whenever we do lbs_cfg_connect() anyway
         * - neither "iw" nor "wpa_supplicant" won't call this during
         *   an ongoing connection
         * - TODO: but I have to check if this is still true when
         *   I set the AP to periodic re-keying
         * - we've not kzallec() something when we've added a key at
         *   lbs_cfg_connect() or lbs_cfg_add_key().
         *
         * This causes lbs_cfg_del_key() only called at disconnect time,
         * where we'd just waste time deleting a key that is not going
         * to be used anyway.
         */
        if (key_index < 3 && priv->wep_key_len[key_index]) {
                priv->wep_key_len[key_index] = 0;
                lbs_set_wep_keys(priv);
        }
#endif

        return 0;
}


/*
 * Get station
 */

static int lbs_cfg_get_station(struct wiphy *wiphy, struct net_device *dev,
                               const u8 *mac, struct station_info *sinfo)
{
        struct lbs_private *priv = wiphy_priv(wiphy);
        s8 signal, noise;
        int ret;
        size_t i;

        sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BYTES) |
                         BIT_ULL(NL80211_STA_INFO_TX_PACKETS) |
                         BIT_ULL(NL80211_STA_INFO_RX_BYTES) |
                         BIT_ULL(NL80211_STA_INFO_RX_PACKETS);
        sinfo->tx_bytes = priv->dev->stats.tx_bytes;
        sinfo->tx_packets = priv->dev->stats.tx_packets;
        sinfo->rx_bytes = priv->dev->stats.rx_bytes;
        sinfo->rx_packets = priv->dev->stats.rx_packets;

        /* Get current RSSI */
        ret = lbs_get_rssi(priv, &signal, &noise);
        if (ret == 0) {
                sinfo->signal = signal;
                sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
        }

        /* Convert priv->cur_rate from hw_value to NL80211 value */
        for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) {
                if (priv->cur_rate == lbs_rates[i].hw_value) {
                        sinfo->txrate.legacy = lbs_rates[i].bitrate;
                        sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
                        break;
                }
        }

        return 0;
}




/*
 * Change interface
 */

static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev,
        enum nl80211_iftype type,
               struct vif_params *params)
{
        struct lbs_private *priv = wiphy_priv(wiphy);
        int ret = 0;

        if (dev == priv->mesh_dev)
                return -EOPNOTSUPP;

        switch (type) {
        case NL80211_IFTYPE_MONITOR:
        case NL80211_IFTYPE_STATION:
        case NL80211_IFTYPE_ADHOC:
                break;
        default:
                return -EOPNOTSUPP;
        }

        if (priv->iface_running)
                ret = lbs_set_iface_type(priv, type);

        if (!ret)
                priv->wdev->iftype = type;

        return ret;
}



/*
 * IBSS (Ad-Hoc)
 */

/*
 * The firmware needs the following bits masked out of the beacon-derived
 * capability field when associating/joining to a BSS:
 *  9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused)
 */
#define CAPINFO_MASK (~(0xda00))


static void lbs_join_post(struct lbs_private *priv,
                          struct cfg80211_ibss_params *params,
                          u8 *bssid, u16 capability)
{
        u8 fake_ie[2 + IEEE80211_MAX_SSID_LEN + /* ssid */
                   2 + 4 +                      /* basic rates */
                   2 + 1 +                      /* DS parameter */
                   2 + 2 +                      /* atim */
                   2 + 8];                      /* extended rates */
        u8 *fake = fake_ie;
        struct cfg80211_bss *bss;

        /*
         * For cfg80211_inform_bss, we'll need a fake IE, as we can't get
         * the real IE from the firmware. So we fabricate a fake IE based on
         * what the firmware actually sends (sniffed with wireshark).
         */
        /* Fake SSID IE */
        *fake++ = WLAN_EID_SSID;
        *fake++ = params->ssid_len;
        memcpy(fake, params->ssid, params->ssid_len);
        fake += params->ssid_len;
        /* Fake supported basic rates IE */
        *fake++ = WLAN_EID_SUPP_RATES;
        *fake++ = 4;
        *fake++ = 0x82;
        *fake++ = 0x84;
        *fake++ = 0x8b;
        *fake++ = 0x96;
        /* Fake DS channel IE */
        *fake++ = WLAN_EID_DS_PARAMS;
        *fake++ = 1;
        *fake++ = params->chandef.chan->hw_value;
        /* Fake IBSS params IE */
        *fake++ = WLAN_EID_IBSS_PARAMS;
        *fake++ = 2;
        *fake++ = 0; /* ATIM=0 */
        *fake++ = 0;
        /* Fake extended rates IE, TODO: don't add this for 802.11b only,
         * but I don't know how this could be checked */
        *fake++ = WLAN_EID_EXT_SUPP_RATES;
        *fake++ = 8;
        *fake++ = 0x0c;
        *fake++ = 0x12;
        *fake++ = 0x18;
        *fake++ = 0x24;
        *fake++ = 0x30;
        *fake++ = 0x48;
        *fake++ = 0x60;
        *fake++ = 0x6c;
        lbs_deb_hex(LBS_DEB_CFG80211, "IE", fake_ie, fake - fake_ie);

        bss = cfg80211_inform_bss(priv->wdev->wiphy,
                                  params->chandef.chan,
                                  CFG80211_BSS_FTYPE_UNKNOWN,
                                  bssid,
                                  0,
                                  capability,
                                  params->beacon_interval,
                                  fake_ie, fake - fake_ie,
                                  0, GFP_KERNEL);
        cfg80211_put_bss(priv->wdev->wiphy, bss);

        cfg80211_ibss_joined(priv->dev, bssid, params->chandef.chan,
                             GFP_KERNEL);

        /* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */
        priv->connect_status = LBS_CONNECTED;
        netif_carrier_on(priv->dev);
        if (!priv->tx_pending_len)
                netif_wake_queue(priv->dev);
}

static int lbs_ibss_join_existing(struct lbs_private *priv,
        struct cfg80211_ibss_params *params,
        struct cfg80211_bss *bss)
{
        const u8 *rates_eid;
        struct cmd_ds_802_11_ad_hoc_join cmd;
        u8 preamble = RADIO_PREAMBLE_SHORT;
        int ret = 0;
        int hw, i;
        u8 rates_max;
        u8 *rates;

        /* TODO: set preamble based on scan result */
        ret = lbs_set_radio(priv, preamble, 1);
        if (ret)
                goto out;

        /*
         * Example CMD_802_11_AD_HOC_JOIN command:
         *
         * command         2c 00         CMD_802_11_AD_HOC_JOIN
         * size            65 00
         * sequence        xx xx
         * result          00 00
         * bssid           02 27 27 97 2f 96
         * ssid            49 42 53 53 00 00 00 00
         *                 00 00 00 00 00 00 00 00
         *                 00 00 00 00 00 00 00 00
         *                 00 00 00 00 00 00 00 00
         * type            02            CMD_BSS_TYPE_IBSS
         * beacon period   64 00
         * dtim period     00
         * timestamp       00 00 00 00 00 00 00 00
         * localtime       00 00 00 00 00 00 00 00
         * IE DS           03
         * IE DS len       01
         * IE DS channel   01
         * reserveed       00 00 00 00
         * IE IBSS         06
         * IE IBSS len     02
         * IE IBSS atim    00 00
         * reserved        00 00 00 00
         * capability      02 00
         * rates           82 84 8b 96 0c 12 18 24 30 48 60 6c 00
         * fail timeout    ff 00
         * probe delay     00 00
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.hdr.size = cpu_to_le16(sizeof(cmd));

        memcpy(cmd.bss.bssid, bss->bssid, ETH_ALEN);
        memcpy(cmd.bss.ssid, params->ssid, params->ssid_len);
        cmd.bss.type = CMD_BSS_TYPE_IBSS;
        cmd.bss.beaconperiod = cpu_to_le16(params->beacon_interval);
        cmd.bss.ds.header.id = WLAN_EID_DS_PARAMS;
        cmd.bss.ds.header.len = 1;
        cmd.bss.ds.channel = params->chandef.chan->hw_value;
        cmd.bss.ibss.header.id = WLAN_EID_IBSS_PARAMS;
        cmd.bss.ibss.header.len = 2;
        cmd.bss.ibss.atimwindow = 0;
        cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK);

        /* set rates to the intersection of our rates and the rates in the
           bss */
        rcu_read_lock();
        rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES);
        if (!rates_eid) {
                lbs_add_rates(cmd.bss.rates);
        } else {
                rates_max = rates_eid[1];
                if (rates_max > MAX_RATES) {
                        lbs_deb_join("invalid rates");
                        rcu_read_unlock();
                        ret = -EINVAL;
                        goto out;
                }
                rates = cmd.bss.rates;
                for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) {
                        u8 hw_rate = lbs_rates[hw].bitrate / 5;
                        for (i = 0; i < rates_max; i++) {
                                if (hw_rate == (rates_eid[i+2] & 0x7f)) {
                                        u8 rate = rates_eid[i+2];
                                        if (rate == 0x02 || rate == 0x04 ||
                                            rate == 0x0b || rate == 0x16)
                                                rate |= 0x80;
                                        *rates++ = rate;
                                }
                        }
                }
        }
        rcu_read_unlock();

        /* Only v8 and below support setting this */
        if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) {
                cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT);
                cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME);
        }
        ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd);
        if (ret)
                goto out;

        /*
         * This is a sample response to CMD_802_11_AD_HOC_JOIN:
         *
         * response        2c 80
         * size            09 00
         * sequence        xx xx
         * result          00 00
         * reserved        00
         */
        lbs_join_post(priv, params, bss->bssid, bss->capability);

 out:
        return ret;
}



static int lbs_ibss_start_new(struct lbs_private *priv,
        struct cfg80211_ibss_params *params)
{
        struct cmd_ds_802_11_ad_hoc_start cmd;
        struct cmd_ds_802_11_ad_hoc_result *resp =
                (struct cmd_ds_802_11_ad_hoc_result *) &cmd;
        u8 preamble = RADIO_PREAMBLE_SHORT;
        int ret = 0;
        u16 capability;

        ret = lbs_set_radio(priv, preamble, 1);
        if (ret)
                goto out;

        /*
         * Example CMD_802_11_AD_HOC_START command:
         *
         * command         2b 00         CMD_802_11_AD_HOC_START
         * size            b1 00
         * sequence        xx xx
         * result          00 00
         * ssid            54 45 53 54 00 00 00 00
         *                 00 00 00 00 00 00 00 00
         *                 00 00 00 00 00 00 00 00
         *                 00 00 00 00 00 00 00 00
         * bss type        02
         * beacon period   64 00
         * dtim period     00
         * IE IBSS         06
         * IE IBSS len     02
         * IE IBSS atim    00 00
         * reserved        00 00 00 00
         * IE DS           03
         * IE DS len       01
         * IE DS channel   01
         * reserved        00 00 00 00
         * probe delay     00 00
         * capability      02 00
         * rates           82 84 8b 96   (basic rates with have bit 7 set)
         *                 0c 12 18 24 30 48 60 6c
         * padding         100 bytes
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.hdr.size = cpu_to_le16(sizeof(cmd));
        memcpy(cmd.ssid, params->ssid, params->ssid_len);
        cmd.bsstype = CMD_BSS_TYPE_IBSS;
        cmd.beaconperiod = cpu_to_le16(params->beacon_interval);
        cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS;
        cmd.ibss.header.len = 2;
        cmd.ibss.atimwindow = 0;
        cmd.ds.header.id = WLAN_EID_DS_PARAMS;
        cmd.ds.header.len = 1;
        cmd.ds.channel = params->chandef.chan->hw_value;
        /* Only v8 and below support setting probe delay */
        if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8)
                cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME);
        /* TODO: mix in WLAN_CAPABILITY_PRIVACY */
        capability = WLAN_CAPABILITY_IBSS;
        cmd.capability = cpu_to_le16(capability);
        lbs_add_rates(cmd.rates);


        ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd);
        if (ret)
                goto out;

        /*
         * This is a sample response to CMD_802_11_AD_HOC_JOIN:
         *
         * response        2b 80
         * size            14 00
         * sequence        xx xx
         * result          00 00
         * reserved        00
         * bssid           02 2b 7b 0f 86 0e
         */
        lbs_join_post(priv, params, resp->bssid, capability);

 out:
        return ret;
}


static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev,
                struct cfg80211_ibss_params *params)
{
        struct lbs_private *priv = wiphy_priv(wiphy);
        int ret = 0;
        struct cfg80211_bss *bss;

        if (dev == priv->mesh_dev)
                return -EOPNOTSUPP;

        if (!params->chandef.chan) {
                ret = -ENOTSUPP;
                goto out;
        }

        ret = lbs_set_channel(priv, params->chandef.chan->hw_value);
        if (ret)
                goto out;

        /* Search if someone is beaconing. This assumes that the
         * bss list is populated already */
        bss = cfg80211_get_bss(wiphy, params->chandef.chan, params->bssid,
                params->ssid, params->ssid_len,
                IEEE80211_BSS_TYPE_IBSS, IEEE80211_PRIVACY_ANY);

        if (bss) {
                ret = lbs_ibss_join_existing(priv, params, bss);
                cfg80211_put_bss(wiphy, bss);
        } else
                ret = lbs_ibss_start_new(priv, params);


 out:
        return ret;
}


static int lbs_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
{
        struct lbs_private *priv = wiphy_priv(wiphy);
        struct cmd_ds_802_11_ad_hoc_stop cmd;
        int ret = 0;

        if (dev == priv->mesh_dev)
                return -EOPNOTSUPP;

        memset(&cmd, 0, sizeof(cmd));
        cmd.hdr.size = cpu_to_le16(sizeof(cmd));
        ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd);

        /* TODO: consider doing this at MACREG_INT_CODE_ADHOC_BCN_LOST time */
        lbs_mac_event_disconnected(priv, true);

        return ret;
}



static int lbs_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
                              bool enabled, int timeout)
{
        struct lbs_private *priv = wiphy_priv(wiphy);

        if  (!(priv->fwcapinfo & FW_CAPINFO_PS)) {
                if (!enabled)
                        return 0;
                else
                        return -EINVAL;
        }
        /* firmware does not work well with too long latency with power saving
         * enabled, so do not enable it if there is only polling, no
         * interrupts (like in some sdio hosts which can only
         * poll for sdio irqs)
         */
        if  (priv->is_polling) {
                if (!enabled)
                        return 0;
                else
                        return -EINVAL;
        }
        if (!enabled) {
                priv->psmode = LBS802_11POWERMODECAM;
                if (priv->psstate != PS_STATE_FULL_POWER)
                        lbs_set_ps_mode(priv,

                                        PS_MODE_ACTION_EXIT_PS,
                                        true);
                return 0;
        }
        if (priv->psmode != LBS802_11POWERMODECAM)
                return 0;
        priv->psmode = LBS802_11POWERMODEMAX_PSP;
        if (priv->connect_status == LBS_CONNECTED)
                lbs_set_ps_mode(priv, PS_MODE_ACTION_ENTER_PS, true);
        return 0;
}

/*
 * Initialization
 */

static const struct cfg80211_ops lbs_cfg80211_ops = {
        .set_monitor_channel = lbs_cfg_set_monitor_channel,
        .libertas_set_mesh_channel = lbs_cfg_set_mesh_channel,
        .scan = lbs_cfg_scan,
        .connect = lbs_cfg_connect,
        .disconnect = lbs_cfg_disconnect,
        .add_key = lbs_cfg_add_key,
        .del_key = lbs_cfg_del_key,
        .set_default_key = lbs_cfg_set_default_key,
        .get_station = lbs_cfg_get_station,
        .change_virtual_intf = lbs_change_intf,
        .join_ibss = lbs_join_ibss,
        .leave_ibss = lbs_leave_ibss,
        .set_power_mgmt = lbs_set_power_mgmt,
};


/*
 * At this time lbs_private *priv doesn't even exist, so we just allocate
 * memory and don't initialize the wiphy further. This is postponed until we
 * can talk to the firmware and happens at registration time in
 * lbs_cfg_wiphy_register().
 */
struct wireless_dev *lbs_cfg_alloc(struct device *dev)
{
        int ret = 0;
        struct wireless_dev *wdev;

        wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
        if (!wdev)
                return ERR_PTR(-ENOMEM);

        wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private));
        if (!wdev->wiphy) {
                dev_err(dev, "cannot allocate wiphy\n");
                ret = -ENOMEM;
                goto err_wiphy_new;
        }

        return wdev;

 err_wiphy_new:
        kfree(wdev);
        return ERR_PTR(ret);
}


static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv)
{
        struct region_code_mapping {
                const char *cn;
                int code;
        };

        /* Section 5.17.2 */
        static const struct region_code_mapping regmap[] = {
                {"US ", 0x10}, /* US FCC */
                {"CA ", 0x20}, /* Canada */
                {"EU ", 0x30}, /* ETSI   */
                {"ES ", 0x31}, /* Spain  */
                {"FR ", 0x32}, /* France */
                {"JP ", 0x40}, /* Japan  */
        };
        size_t i;

        for (i = 0; i < ARRAY_SIZE(regmap); i++)
                if (regmap[i].code == priv->regioncode) {
                        regulatory_hint(priv->wdev->wiphy, regmap[i].cn);
                        break;
                }
}

static void lbs_reg_notifier(struct wiphy *wiphy,
                             struct regulatory_request *request)
{
        struct lbs_private *priv = wiphy_priv(wiphy);

        memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2));
        if (lbs_iface_active(priv))
                lbs_set_11d_domain_info(priv);
}

/*
 * This function get's called after lbs_setup_firmware() determined the
 * firmware capabities. So we can setup the wiphy according to our
 * hardware/firmware.
 */
int lbs_cfg_register(struct lbs_private *priv)
{
        struct wireless_dev *wdev = priv->wdev;
        int ret;

        wdev->wiphy->max_scan_ssids = 1;
        wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;

        wdev->wiphy->interface_modes =
                        BIT(NL80211_IFTYPE_STATION) |
                        BIT(NL80211_IFTYPE_ADHOC);
        if (lbs_rtap_supported(priv))
                wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
        if (lbs_mesh_activated(priv))
                wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MESH_POINT);

        wdev->wiphy->bands[NL80211_BAND_2GHZ] = &lbs_band_2ghz;

        /*
         * We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have
         * never seen a firmware without WPA
         */
        wdev->wiphy->cipher_suites = cipher_suites;
        wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
        wdev->wiphy->reg_notifier = lbs_reg_notifier;

        ret = wiphy_register(wdev->wiphy);
        if (ret < 0)
                pr_err("cannot register wiphy device\n");

        priv->wiphy_registered = true;

        ret = register_netdev(priv->dev);
        if (ret)
                pr_err("cannot register network device\n");

        INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker);

        lbs_cfg_set_regulatory_hint(priv);

        return ret;
}

void lbs_scan_deinit(struct lbs_private *priv)
{
        cancel_delayed_work_sync(&priv->scan_work);
}


void lbs_cfg_free(struct lbs_private *priv)
{
        struct wireless_dev *wdev = priv->wdev;

        if (!wdev)
                return;

        if (priv->wiphy_registered)
                wiphy_unregister(wdev->wiphy);

        if (wdev->wiphy)
                wiphy_free(wdev->wiphy);

        kfree(wdev);
}