linux/drivers/net/wireless/marvell/mwifiex/debugfs.c
<<
>>
Prefs
   1/*
   2 * NXP Wireless LAN device driver: debugfs
   3 *
   4 * Copyright 2011-2020 NXP
   5 *
   6 * This software file (the "File") is distributed by NXP
   7 * under the terms of the GNU General Public License Version 2, June 1991
   8 * (the "License").  You may use, redistribute and/or modify this File in
   9 * accordance with the terms and conditions of the License, a copy of which
  10 * is available by writing to the Free Software Foundation, Inc.,
  11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
  12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
  13 *
  14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
  15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
  16 * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
  17 * this warranty disclaimer.
  18 */
  19
  20#include <linux/debugfs.h>
  21
  22#include "main.h"
  23#include "11n.h"
  24
  25
  26static struct dentry *mwifiex_dfs_dir;
  27
  28static char *bss_modes[] = {
  29        "UNSPECIFIED",
  30        "ADHOC",
  31        "STATION",
  32        "AP",
  33        "AP_VLAN",
  34        "WDS",
  35        "MONITOR",
  36        "MESH_POINT",
  37        "P2P_CLIENT",
  38        "P2P_GO",
  39        "P2P_DEVICE",
  40};
  41
  42/*
  43 * Proc info file read handler.
  44 *
  45 * This function is called when the 'info' file is opened for reading.
  46 * It prints the following driver related information -
  47 *      - Driver name
  48 *      - Driver version
  49 *      - Driver extended version
  50 *      - Interface name
  51 *      - BSS mode
  52 *      - Media state (connected or disconnected)
  53 *      - MAC address
  54 *      - Total number of Tx bytes
  55 *      - Total number of Rx bytes
  56 *      - Total number of Tx packets
  57 *      - Total number of Rx packets
  58 *      - Total number of dropped Tx packets
  59 *      - Total number of dropped Rx packets
  60 *      - Total number of corrupted Tx packets
  61 *      - Total number of corrupted Rx packets
  62 *      - Carrier status (on or off)
  63 *      - Tx queue status (started or stopped)
  64 *
  65 * For STA mode drivers, it also prints the following extra -
  66 *      - ESSID
  67 *      - BSSID
  68 *      - Channel
  69 *      - Region code
  70 *      - Multicast count
  71 *      - Multicast addresses
  72 */
  73static ssize_t
  74mwifiex_info_read(struct file *file, char __user *ubuf,
  75                  size_t count, loff_t *ppos)
  76{
  77        struct mwifiex_private *priv =
  78                (struct mwifiex_private *) file->private_data;
  79        struct net_device *netdev = priv->netdev;
  80        struct netdev_hw_addr *ha;
  81        struct netdev_queue *txq;
  82        unsigned long page = get_zeroed_page(GFP_KERNEL);
  83        char *p = (char *) page, fmt[64];
  84        struct mwifiex_bss_info info;
  85        ssize_t ret;
  86        int i = 0;
  87
  88        if (!p)
  89                return -ENOMEM;
  90
  91        memset(&info, 0, sizeof(info));
  92        ret = mwifiex_get_bss_info(priv, &info);
  93        if (ret)
  94                goto free_and_exit;
  95
  96        mwifiex_drv_get_driver_version(priv->adapter, fmt, sizeof(fmt) - 1);
  97
  98        mwifiex_get_ver_ext(priv, 0);
  99
 100        p += sprintf(p, "driver_name = " "\"mwifiex\"\n");
 101        p += sprintf(p, "driver_version = %s", fmt);
 102        p += sprintf(p, "\nverext = %s", priv->version_str);
 103        p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name);
 104
 105        if (info.bss_mode >= ARRAY_SIZE(bss_modes))
 106                p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode);
 107        else
 108                p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]);
 109
 110        p += sprintf(p, "media_state=\"%s\"\n",
 111                     (!priv->media_connected ? "Disconnected" : "Connected"));
 112        p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr);
 113
 114        if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) {
 115                p += sprintf(p, "multicast_count=\"%d\"\n",
 116                             netdev_mc_count(netdev));
 117                p += sprintf(p, "essid=\"%.*s\"\n", info.ssid.ssid_len,
 118                             info.ssid.ssid);
 119                p += sprintf(p, "bssid=\"%pM\"\n", info.bssid);
 120                p += sprintf(p, "channel=\"%d\"\n", (int) info.bss_chan);
 121                p += sprintf(p, "country_code = \"%s\"\n", info.country_code);
 122                p += sprintf(p, "region_code=\"0x%x\"\n",
 123                             priv->adapter->region_code);
 124
 125                netdev_for_each_mc_addr(ha, netdev)
 126                        p += sprintf(p, "multicast_address[%d]=\"%pM\"\n",
 127                                        i++, ha->addr);
 128        }
 129
 130        p += sprintf(p, "num_tx_bytes = %lu\n", priv->stats.tx_bytes);
 131        p += sprintf(p, "num_rx_bytes = %lu\n", priv->stats.rx_bytes);
 132        p += sprintf(p, "num_tx_pkts = %lu\n", priv->stats.tx_packets);
 133        p += sprintf(p, "num_rx_pkts = %lu\n", priv->stats.rx_packets);
 134        p += sprintf(p, "num_tx_pkts_dropped = %lu\n", priv->stats.tx_dropped);
 135        p += sprintf(p, "num_rx_pkts_dropped = %lu\n", priv->stats.rx_dropped);
 136        p += sprintf(p, "num_tx_pkts_err = %lu\n", priv->stats.tx_errors);
 137        p += sprintf(p, "num_rx_pkts_err = %lu\n", priv->stats.rx_errors);
 138        p += sprintf(p, "carrier %s\n", ((netif_carrier_ok(priv->netdev))
 139                                         ? "on" : "off"));
 140        p += sprintf(p, "tx queue");
 141        for (i = 0; i < netdev->num_tx_queues; i++) {
 142                txq = netdev_get_tx_queue(netdev, i);
 143                p += sprintf(p, " %d:%s", i, netif_tx_queue_stopped(txq) ?
 144                             "stopped" : "started");
 145        }
 146        p += sprintf(p, "\n");
 147
 148        ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page,
 149                                      (unsigned long) p - page);
 150
 151free_and_exit:
 152        free_page(page);
 153        return ret;
 154}
 155
 156/*
 157 * Proc getlog file read handler.
 158 *
 159 * This function is called when the 'getlog' file is opened for reading
 160 * It prints the following log information -
 161 *      - Number of multicast Tx frames
 162 *      - Number of failed packets
 163 *      - Number of Tx retries
 164 *      - Number of multicast Tx retries
 165 *      - Number of duplicate frames
 166 *      - Number of RTS successes
 167 *      - Number of RTS failures
 168 *      - Number of ACK failures
 169 *      - Number of fragmented Rx frames
 170 *      - Number of multicast Rx frames
 171 *      - Number of FCS errors
 172 *      - Number of Tx frames
 173 *      - WEP ICV error counts
 174 *      - Number of received beacons
 175 *      - Number of missed beacons
 176 */
 177static ssize_t
 178mwifiex_getlog_read(struct file *file, char __user *ubuf,
 179                    size_t count, loff_t *ppos)
 180{
 181        struct mwifiex_private *priv =
 182                (struct mwifiex_private *) file->private_data;
 183        unsigned long page = get_zeroed_page(GFP_KERNEL);
 184        char *p = (char *) page;
 185        ssize_t ret;
 186        struct mwifiex_ds_get_stats stats;
 187
 188        if (!p)
 189                return -ENOMEM;
 190
 191        memset(&stats, 0, sizeof(stats));
 192        ret = mwifiex_get_stats_info(priv, &stats);
 193        if (ret)
 194                goto free_and_exit;
 195
 196        p += sprintf(p, "\n"
 197                     "mcasttxframe     %u\n"
 198                     "failed           %u\n"
 199                     "retry            %u\n"
 200                     "multiretry       %u\n"
 201                     "framedup         %u\n"
 202                     "rtssuccess       %u\n"
 203                     "rtsfailure       %u\n"
 204                     "ackfailure       %u\n"
 205                     "rxfrag           %u\n"
 206                     "mcastrxframe     %u\n"
 207                     "fcserror         %u\n"
 208                     "txframe          %u\n"
 209                     "wepicverrcnt-1   %u\n"
 210                     "wepicverrcnt-2   %u\n"
 211                     "wepicverrcnt-3   %u\n"
 212                     "wepicverrcnt-4   %u\n"
 213                     "bcn_rcv_cnt   %u\n"
 214                     "bcn_miss_cnt   %u\n",
 215                     stats.mcast_tx_frame,
 216                     stats.failed,
 217                     stats.retry,
 218                     stats.multi_retry,
 219                     stats.frame_dup,
 220                     stats.rts_success,
 221                     stats.rts_failure,
 222                     stats.ack_failure,
 223                     stats.rx_frag,
 224                     stats.mcast_rx_frame,
 225                     stats.fcs_error,
 226                     stats.tx_frame,
 227                     stats.wep_icv_error[0],
 228                     stats.wep_icv_error[1],
 229                     stats.wep_icv_error[2],
 230                     stats.wep_icv_error[3],
 231                     stats.bcn_rcv_cnt,
 232                     stats.bcn_miss_cnt);
 233
 234
 235        ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page,
 236                                      (unsigned long) p - page);
 237
 238free_and_exit:
 239        free_page(page);
 240        return ret;
 241}
 242
 243/* Sysfs histogram file read handler.
 244 *
 245 * This function is called when the 'histogram' file is opened for reading
 246 * It prints the following histogram information -
 247 *      - Number of histogram samples
 248 *      - Receive packet number of each rx_rate
 249 *      - Receive packet number of each snr
 250 *      - Receive packet number of each nosie_flr
 251 *      - Receive packet number of each signal streath
 252 */
 253static ssize_t
 254mwifiex_histogram_read(struct file *file, char __user *ubuf,
 255                       size_t count, loff_t *ppos)
 256{
 257        struct mwifiex_private *priv =
 258                (struct mwifiex_private *)file->private_data;
 259        ssize_t ret;
 260        struct mwifiex_histogram_data *phist_data;
 261        int i, value;
 262        unsigned long page = get_zeroed_page(GFP_KERNEL);
 263        char *p = (char *)page;
 264
 265        if (!p)
 266                return -ENOMEM;
 267
 268        if (!priv || !priv->hist_data)
 269                return -EFAULT;
 270        phist_data = priv->hist_data;
 271
 272        p += sprintf(p, "\n"
 273                     "total samples = %d\n",
 274                     atomic_read(&phist_data->num_samples));
 275
 276        p += sprintf(p,
 277                     "rx rates (in Mbps): 0=1M   1=2M 2=5.5M  3=11M   4=6M   5=9M  6=12M\n"
 278                     "7=18M  8=24M  9=36M  10=48M  11=54M 12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40)\n");
 279
 280        if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) {
 281                p += sprintf(p,
 282                             "44-53=MCS0-9(VHT:BW20) 54-63=MCS0-9(VHT:BW40) 64-73=MCS0-9(VHT:BW80)\n\n");
 283        } else {
 284                p += sprintf(p, "\n");
 285        }
 286
 287        for (i = 0; i < MWIFIEX_MAX_RX_RATES; i++) {
 288                value = atomic_read(&phist_data->rx_rate[i]);
 289                if (value)
 290                        p += sprintf(p, "rx_rate[%02d] = %d\n", i, value);
 291        }
 292
 293        if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) {
 294                for (i = MWIFIEX_MAX_RX_RATES; i < MWIFIEX_MAX_AC_RX_RATES;
 295                     i++) {
 296                        value = atomic_read(&phist_data->rx_rate[i]);
 297                        if (value)
 298                                p += sprintf(p, "rx_rate[%02d] = %d\n",
 299                                           i, value);
 300                }
 301        }
 302
 303        for (i = 0; i < MWIFIEX_MAX_SNR; i++) {
 304                value =  atomic_read(&phist_data->snr[i]);
 305                if (value)
 306                        p += sprintf(p, "snr[%02ddB] = %d\n", i, value);
 307        }
 308        for (i = 0; i < MWIFIEX_MAX_NOISE_FLR; i++) {
 309                value = atomic_read(&phist_data->noise_flr[i]);
 310                if (value)
 311                        p += sprintf(p, "noise_flr[%02ddBm] = %d\n",
 312                                (int)(i-128), value);
 313        }
 314        for (i = 0; i < MWIFIEX_MAX_SIG_STRENGTH; i++) {
 315                value = atomic_read(&phist_data->sig_str[i]);
 316                if (value)
 317                        p += sprintf(p, "sig_strength[-%02ddBm] = %d\n",
 318                                i, value);
 319        }
 320
 321        ret = simple_read_from_buffer(ubuf, count, ppos, (char *)page,
 322                                      (unsigned long)p - page);
 323
 324        return ret;
 325}
 326
 327static ssize_t
 328mwifiex_histogram_write(struct file *file, const char __user *ubuf,
 329                        size_t count, loff_t *ppos)
 330{
 331        struct mwifiex_private *priv = (void *)file->private_data;
 332
 333        if (priv && priv->hist_data)
 334                mwifiex_hist_data_reset(priv);
 335        return 0;
 336}
 337
 338static struct mwifiex_debug_info info;
 339
 340/*
 341 * Proc debug file read handler.
 342 *
 343 * This function is called when the 'debug' file is opened for reading
 344 * It prints the following log information -
 345 *      - Interrupt count
 346 *      - WMM AC VO packets count
 347 *      - WMM AC VI packets count
 348 *      - WMM AC BE packets count
 349 *      - WMM AC BK packets count
 350 *      - Maximum Tx buffer size
 351 *      - Tx buffer size
 352 *      - Current Tx buffer size
 353 *      - Power Save mode
 354 *      - Power Save state
 355 *      - Deep Sleep status
 356 *      - Device wakeup required status
 357 *      - Number of wakeup tries
 358 *      - Host Sleep configured status
 359 *      - Host Sleep activated status
 360 *      - Number of Tx timeouts
 361 *      - Number of command timeouts
 362 *      - Last timed out command ID
 363 *      - Last timed out command action
 364 *      - Last command ID
 365 *      - Last command action
 366 *      - Last command index
 367 *      - Last command response ID
 368 *      - Last command response index
 369 *      - Last event
 370 *      - Last event index
 371 *      - Number of host to card command failures
 372 *      - Number of sleep confirm command failures
 373 *      - Number of host to card data failure
 374 *      - Number of deauthentication events
 375 *      - Number of disassociation events
 376 *      - Number of link lost events
 377 *      - Number of deauthentication commands
 378 *      - Number of association success commands
 379 *      - Number of association failure commands
 380 *      - Number of commands sent
 381 *      - Number of data packets sent
 382 *      - Number of command responses received
 383 *      - Number of events received
 384 *      - Tx BA stream table (TID, RA)
 385 *      - Rx reorder table (TID, TA, Start window, Window size, Buffer)
 386 */
 387static ssize_t
 388mwifiex_debug_read(struct file *file, char __user *ubuf,
 389                   size_t count, loff_t *ppos)
 390{
 391        struct mwifiex_private *priv =
 392                (struct mwifiex_private *) file->private_data;
 393        unsigned long page = get_zeroed_page(GFP_KERNEL);
 394        char *p = (char *) page;
 395        ssize_t ret;
 396
 397        if (!p)
 398                return -ENOMEM;
 399
 400        ret = mwifiex_get_debug_info(priv, &info);
 401        if (ret)
 402                goto free_and_exit;
 403
 404        p += mwifiex_debug_info_to_buffer(priv, p, &info);
 405
 406        ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page,
 407                                      (unsigned long) p - page);
 408
 409free_and_exit:
 410        free_page(page);
 411        return ret;
 412}
 413
 414static u32 saved_reg_type, saved_reg_offset, saved_reg_value;
 415
 416/*
 417 * Proc regrdwr file write handler.
 418 *
 419 * This function is called when the 'regrdwr' file is opened for writing
 420 *
 421 * This function can be used to write to a register.
 422 */
 423static ssize_t
 424mwifiex_regrdwr_write(struct file *file,
 425                      const char __user *ubuf, size_t count, loff_t *ppos)
 426{
 427        char *buf;
 428        int ret;
 429        u32 reg_type = 0, reg_offset = 0, reg_value = UINT_MAX;
 430
 431        buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1)));
 432        if (IS_ERR(buf))
 433                return PTR_ERR(buf);
 434
 435        sscanf(buf, "%u %x %x", &reg_type, &reg_offset, &reg_value);
 436
 437        if (reg_type == 0 || reg_offset == 0) {
 438                ret = -EINVAL;
 439                goto done;
 440        } else {
 441                saved_reg_type = reg_type;
 442                saved_reg_offset = reg_offset;
 443                saved_reg_value = reg_value;
 444                ret = count;
 445        }
 446done:
 447        kfree(buf);
 448        return ret;
 449}
 450
 451/*
 452 * Proc regrdwr file read handler.
 453 *
 454 * This function is called when the 'regrdwr' file is opened for reading
 455 *
 456 * This function can be used to read from a register.
 457 */
 458static ssize_t
 459mwifiex_regrdwr_read(struct file *file, char __user *ubuf,
 460                     size_t count, loff_t *ppos)
 461{
 462        struct mwifiex_private *priv =
 463                (struct mwifiex_private *) file->private_data;
 464        unsigned long addr = get_zeroed_page(GFP_KERNEL);
 465        char *buf = (char *) addr;
 466        int pos = 0, ret = 0;
 467        u32 reg_value;
 468
 469        if (!buf)
 470                return -ENOMEM;
 471
 472        if (!saved_reg_type) {
 473                /* No command has been given */
 474                pos += snprintf(buf, PAGE_SIZE, "0");
 475                goto done;
 476        }
 477        /* Set command has been given */
 478        if (saved_reg_value != UINT_MAX) {
 479                ret = mwifiex_reg_write(priv, saved_reg_type, saved_reg_offset,
 480                                        saved_reg_value);
 481
 482                pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n",
 483                                saved_reg_type, saved_reg_offset,
 484                                saved_reg_value);
 485
 486                ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
 487
 488                goto done;
 489        }
 490        /* Get command has been given */
 491        ret = mwifiex_reg_read(priv, saved_reg_type,
 492                               saved_reg_offset, &reg_value);
 493        if (ret) {
 494                ret = -EINVAL;
 495                goto done;
 496        }
 497
 498        pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", saved_reg_type,
 499                        saved_reg_offset, reg_value);
 500
 501        ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
 502
 503done:
 504        free_page(addr);
 505        return ret;
 506}
 507
 508/* Proc debug_mask file read handler.
 509 * This function is called when the 'debug_mask' file is opened for reading
 510 * This function can be used read driver debugging mask value.
 511 */
 512static ssize_t
 513mwifiex_debug_mask_read(struct file *file, char __user *ubuf,
 514                        size_t count, loff_t *ppos)
 515{
 516        struct mwifiex_private *priv =
 517                (struct mwifiex_private *)file->private_data;
 518        unsigned long page = get_zeroed_page(GFP_KERNEL);
 519        char *buf = (char *)page;
 520        size_t ret = 0;
 521        int pos = 0;
 522
 523        if (!buf)
 524                return -ENOMEM;
 525
 526        pos += snprintf(buf, PAGE_SIZE, "debug mask=0x%08x\n",
 527                        priv->adapter->debug_mask);
 528        ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
 529
 530        free_page(page);
 531        return ret;
 532}
 533
 534/* Proc debug_mask file read handler.
 535 * This function is called when the 'debug_mask' file is opened for reading
 536 * This function can be used read driver debugging mask value.
 537 */
 538static ssize_t
 539mwifiex_debug_mask_write(struct file *file, const char __user *ubuf,
 540                         size_t count, loff_t *ppos)
 541{
 542        int ret;
 543        unsigned long debug_mask;
 544        struct mwifiex_private *priv = (void *)file->private_data;
 545        char *buf;
 546
 547        buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1)));
 548        if (IS_ERR(buf))
 549                return PTR_ERR(buf);
 550
 551        if (kstrtoul(buf, 0, &debug_mask)) {
 552                ret = -EINVAL;
 553                goto done;
 554        }
 555
 556        priv->adapter->debug_mask = debug_mask;
 557        ret = count;
 558done:
 559        kfree(buf);
 560        return ret;
 561}
 562
 563/* debugfs verext file write handler.
 564 * This function is called when the 'verext' file is opened for write
 565 */
 566static ssize_t
 567mwifiex_verext_write(struct file *file, const char __user *ubuf,
 568                     size_t count, loff_t *ppos)
 569{
 570        int ret;
 571        u32 versionstrsel;
 572        struct mwifiex_private *priv = (void *)file->private_data;
 573        char buf[16];
 574
 575        memset(buf, 0, sizeof(buf));
 576
 577        if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
 578                return -EFAULT;
 579
 580        ret = kstrtou32(buf, 10, &versionstrsel);
 581        if (ret)
 582                return ret;
 583
 584        priv->versionstrsel = versionstrsel;
 585
 586        return count;
 587}
 588
 589/* Proc verext file read handler.
 590 * This function is called when the 'verext' file is opened for reading
 591 * This function can be used read driver exteneed verion string.
 592 */
 593static ssize_t
 594mwifiex_verext_read(struct file *file, char __user *ubuf,
 595                    size_t count, loff_t *ppos)
 596{
 597        struct mwifiex_private *priv =
 598                (struct mwifiex_private *)file->private_data;
 599        char buf[256];
 600        int ret;
 601
 602        mwifiex_get_ver_ext(priv, priv->versionstrsel);
 603        ret = snprintf(buf, sizeof(buf), "version string: %s\n",
 604                       priv->version_str);
 605
 606        return simple_read_from_buffer(ubuf, count, ppos, buf, ret);
 607}
 608
 609/* Proc memrw file write handler.
 610 * This function is called when the 'memrw' file is opened for writing
 611 * This function can be used to write to a memory location.
 612 */
 613static ssize_t
 614mwifiex_memrw_write(struct file *file, const char __user *ubuf, size_t count,
 615                    loff_t *ppos)
 616{
 617        int ret;
 618        char cmd;
 619        struct mwifiex_ds_mem_rw mem_rw;
 620        u16 cmd_action;
 621        struct mwifiex_private *priv = (void *)file->private_data;
 622        char *buf;
 623
 624        buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1)));
 625        if (IS_ERR(buf))
 626                return PTR_ERR(buf);
 627
 628        ret = sscanf(buf, "%c %x %x", &cmd, &mem_rw.addr, &mem_rw.value);
 629        if (ret != 3) {
 630                ret = -EINVAL;
 631                goto done;
 632        }
 633
 634        if ((cmd == 'r') || (cmd == 'R')) {
 635                cmd_action = HostCmd_ACT_GEN_GET;
 636                mem_rw.value = 0;
 637        } else if ((cmd == 'w') || (cmd == 'W')) {
 638                cmd_action = HostCmd_ACT_GEN_SET;
 639        } else {
 640                ret = -EINVAL;
 641                goto done;
 642        }
 643
 644        memcpy(&priv->mem_rw, &mem_rw, sizeof(mem_rw));
 645        if (mwifiex_send_cmd(priv, HostCmd_CMD_MEM_ACCESS, cmd_action, 0,
 646                             &mem_rw, true))
 647                ret = -1;
 648        else
 649                ret = count;
 650
 651done:
 652        kfree(buf);
 653        return ret;
 654}
 655
 656/* Proc memrw file read handler.
 657 * This function is called when the 'memrw' file is opened for reading
 658 * This function can be used to read from a memory location.
 659 */
 660static ssize_t
 661mwifiex_memrw_read(struct file *file, char __user *ubuf,
 662                   size_t count, loff_t *ppos)
 663{
 664        struct mwifiex_private *priv = (void *)file->private_data;
 665        unsigned long addr = get_zeroed_page(GFP_KERNEL);
 666        char *buf = (char *)addr;
 667        int ret, pos = 0;
 668
 669        if (!buf)
 670                return -ENOMEM;
 671
 672        pos += snprintf(buf, PAGE_SIZE, "0x%x 0x%x\n", priv->mem_rw.addr,
 673                        priv->mem_rw.value);
 674        ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
 675
 676        free_page(addr);
 677        return ret;
 678}
 679
 680static u32 saved_offset = -1, saved_bytes = -1;
 681
 682/*
 683 * Proc rdeeprom file write handler.
 684 *
 685 * This function is called when the 'rdeeprom' file is opened for writing
 686 *
 687 * This function can be used to write to a RDEEPROM location.
 688 */
 689static ssize_t
 690mwifiex_rdeeprom_write(struct file *file,
 691                       const char __user *ubuf, size_t count, loff_t *ppos)
 692{
 693        char *buf;
 694        int ret = 0;
 695        int offset = -1, bytes = -1;
 696
 697        buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1)));
 698        if (IS_ERR(buf))
 699                return PTR_ERR(buf);
 700
 701        sscanf(buf, "%d %d", &offset, &bytes);
 702
 703        if (offset == -1 || bytes == -1) {
 704                ret = -EINVAL;
 705                goto done;
 706        } else {
 707                saved_offset = offset;
 708                saved_bytes = bytes;
 709                ret = count;
 710        }
 711done:
 712        kfree(buf);
 713        return ret;
 714}
 715
 716/*
 717 * Proc rdeeprom read write handler.
 718 *
 719 * This function is called when the 'rdeeprom' file is opened for reading
 720 *
 721 * This function can be used to read from a RDEEPROM location.
 722 */
 723static ssize_t
 724mwifiex_rdeeprom_read(struct file *file, char __user *ubuf,
 725                      size_t count, loff_t *ppos)
 726{
 727        struct mwifiex_private *priv =
 728                (struct mwifiex_private *) file->private_data;
 729        unsigned long addr = get_zeroed_page(GFP_KERNEL);
 730        char *buf = (char *) addr;
 731        int pos, ret, i;
 732        u8 value[MAX_EEPROM_DATA];
 733
 734        if (!buf)
 735                return -ENOMEM;
 736
 737        if (saved_offset == -1) {
 738                /* No command has been given */
 739                pos = snprintf(buf, PAGE_SIZE, "0");
 740                goto done;
 741        }
 742
 743        /* Get command has been given */
 744        ret = mwifiex_eeprom_read(priv, (u16) saved_offset,
 745                                  (u16) saved_bytes, value);
 746        if (ret) {
 747                ret = -EINVAL;
 748                goto out_free;
 749        }
 750
 751        pos = snprintf(buf, PAGE_SIZE, "%d %d ", saved_offset, saved_bytes);
 752
 753        for (i = 0; i < saved_bytes; i++)
 754                pos += scnprintf(buf + pos, PAGE_SIZE - pos, "%d ", value[i]);
 755
 756done:
 757        ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
 758out_free:
 759        free_page(addr);
 760        return ret;
 761}
 762
 763/* Proc hscfg file write handler
 764 * This function can be used to configure the host sleep parameters.
 765 */
 766static ssize_t
 767mwifiex_hscfg_write(struct file *file, const char __user *ubuf,
 768                    size_t count, loff_t *ppos)
 769{
 770        struct mwifiex_private *priv = (void *)file->private_data;
 771        char *buf;
 772        int ret, arg_num;
 773        struct mwifiex_ds_hs_cfg hscfg;
 774        int conditions = HS_CFG_COND_DEF;
 775        u32 gpio = HS_CFG_GPIO_DEF, gap = HS_CFG_GAP_DEF;
 776
 777        buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1)));
 778        if (IS_ERR(buf))
 779                return PTR_ERR(buf);
 780
 781        arg_num = sscanf(buf, "%d %x %x", &conditions, &gpio, &gap);
 782
 783        memset(&hscfg, 0, sizeof(struct mwifiex_ds_hs_cfg));
 784
 785        if (arg_num > 3) {
 786                mwifiex_dbg(priv->adapter, ERROR,
 787                            "Too many arguments\n");
 788                ret = -EINVAL;
 789                goto done;
 790        }
 791
 792        if (arg_num >= 1 && arg_num < 3)
 793                mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET,
 794                                      MWIFIEX_SYNC_CMD, &hscfg);
 795
 796        if (arg_num) {
 797                if (conditions == HS_CFG_CANCEL) {
 798                        mwifiex_cancel_hs(priv, MWIFIEX_ASYNC_CMD);
 799                        ret = count;
 800                        goto done;
 801                }
 802                hscfg.conditions = conditions;
 803        }
 804        if (arg_num >= 2)
 805                hscfg.gpio = gpio;
 806        if (arg_num == 3)
 807                hscfg.gap = gap;
 808
 809        hscfg.is_invoke_hostcmd = false;
 810        mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET,
 811                              MWIFIEX_SYNC_CMD, &hscfg);
 812
 813        mwifiex_enable_hs(priv->adapter);
 814        clear_bit(MWIFIEX_IS_HS_ENABLING, &priv->adapter->work_flags);
 815        ret = count;
 816done:
 817        kfree(buf);
 818        return ret;
 819}
 820
 821/* Proc hscfg file read handler
 822 * This function can be used to read host sleep configuration
 823 * parameters from driver.
 824 */
 825static ssize_t
 826mwifiex_hscfg_read(struct file *file, char __user *ubuf,
 827                   size_t count, loff_t *ppos)
 828{
 829        struct mwifiex_private *priv = (void *)file->private_data;
 830        unsigned long addr = get_zeroed_page(GFP_KERNEL);
 831        char *buf = (char *)addr;
 832        int pos, ret;
 833        struct mwifiex_ds_hs_cfg hscfg;
 834
 835        if (!buf)
 836                return -ENOMEM;
 837
 838        mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET,
 839                              MWIFIEX_SYNC_CMD, &hscfg);
 840
 841        pos = snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", hscfg.conditions,
 842                       hscfg.gpio, hscfg.gap);
 843
 844        ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
 845
 846        free_page(addr);
 847        return ret;
 848}
 849
 850static ssize_t
 851mwifiex_timeshare_coex_read(struct file *file, char __user *ubuf,
 852                            size_t count, loff_t *ppos)
 853{
 854        struct mwifiex_private *priv = file->private_data;
 855        char buf[3];
 856        bool timeshare_coex;
 857        int ret;
 858        unsigned int len;
 859
 860        if (priv->adapter->fw_api_ver != MWIFIEX_FW_V15)
 861                return -EOPNOTSUPP;
 862
 863        ret = mwifiex_send_cmd(priv, HostCmd_CMD_ROBUST_COEX,
 864                               HostCmd_ACT_GEN_GET, 0, &timeshare_coex, true);
 865        if (ret)
 866                return ret;
 867
 868        len = sprintf(buf, "%d\n", timeshare_coex);
 869        return simple_read_from_buffer(ubuf, count, ppos, buf, len);
 870}
 871
 872static ssize_t
 873mwifiex_timeshare_coex_write(struct file *file, const char __user *ubuf,
 874                             size_t count, loff_t *ppos)
 875{
 876        bool timeshare_coex;
 877        struct mwifiex_private *priv = file->private_data;
 878        char kbuf[16];
 879        int ret;
 880
 881        if (priv->adapter->fw_api_ver != MWIFIEX_FW_V15)
 882                return -EOPNOTSUPP;
 883
 884        memset(kbuf, 0, sizeof(kbuf));
 885
 886        if (copy_from_user(&kbuf, ubuf, min_t(size_t, sizeof(kbuf) - 1, count)))
 887                return -EFAULT;
 888
 889        if (strtobool(kbuf, &timeshare_coex))
 890                return -EINVAL;
 891
 892        ret = mwifiex_send_cmd(priv, HostCmd_CMD_ROBUST_COEX,
 893                               HostCmd_ACT_GEN_SET, 0, &timeshare_coex, true);
 894        if (ret)
 895                return ret;
 896        else
 897                return count;
 898}
 899
 900static ssize_t
 901mwifiex_reset_write(struct file *file,
 902                    const char __user *ubuf, size_t count, loff_t *ppos)
 903{
 904        struct mwifiex_private *priv = file->private_data;
 905        struct mwifiex_adapter *adapter = priv->adapter;
 906        bool result;
 907        int rc;
 908
 909        rc = kstrtobool_from_user(ubuf, count, &result);
 910        if (rc)
 911                return rc;
 912
 913        if (!result)
 914                return -EINVAL;
 915
 916        if (adapter->if_ops.card_reset) {
 917                dev_info(adapter->dev, "Resetting per request\n");
 918                adapter->if_ops.card_reset(adapter);
 919        }
 920
 921        return count;
 922}
 923
 924#define MWIFIEX_DFS_ADD_FILE(name) do {                                 \
 925        debugfs_create_file(#name, 0644, priv->dfs_dev_dir, priv,       \
 926                            &mwifiex_dfs_##name##_fops);                \
 927} while (0);
 928
 929#define MWIFIEX_DFS_FILE_OPS(name)                                      \
 930static const struct file_operations mwifiex_dfs_##name##_fops = {       \
 931        .read = mwifiex_##name##_read,                                  \
 932        .write = mwifiex_##name##_write,                                \
 933        .open = simple_open,                                            \
 934};
 935
 936#define MWIFIEX_DFS_FILE_READ_OPS(name)                                 \
 937static const struct file_operations mwifiex_dfs_##name##_fops = {       \
 938        .read = mwifiex_##name##_read,                                  \
 939        .open = simple_open,                                            \
 940};
 941
 942#define MWIFIEX_DFS_FILE_WRITE_OPS(name)                                \
 943static const struct file_operations mwifiex_dfs_##name##_fops = {       \
 944        .write = mwifiex_##name##_write,                                \
 945        .open = simple_open,                                            \
 946};
 947
 948
 949MWIFIEX_DFS_FILE_READ_OPS(info);
 950MWIFIEX_DFS_FILE_READ_OPS(debug);
 951MWIFIEX_DFS_FILE_READ_OPS(getlog);
 952MWIFIEX_DFS_FILE_OPS(regrdwr);
 953MWIFIEX_DFS_FILE_OPS(rdeeprom);
 954MWIFIEX_DFS_FILE_OPS(memrw);
 955MWIFIEX_DFS_FILE_OPS(hscfg);
 956MWIFIEX_DFS_FILE_OPS(histogram);
 957MWIFIEX_DFS_FILE_OPS(debug_mask);
 958MWIFIEX_DFS_FILE_OPS(timeshare_coex);
 959MWIFIEX_DFS_FILE_WRITE_OPS(reset);
 960MWIFIEX_DFS_FILE_OPS(verext);
 961
 962/*
 963 * This function creates the debug FS directory structure and the files.
 964 */
 965void
 966mwifiex_dev_debugfs_init(struct mwifiex_private *priv)
 967{
 968        if (!mwifiex_dfs_dir || !priv)
 969                return;
 970
 971        priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name,
 972                                               mwifiex_dfs_dir);
 973
 974        if (!priv->dfs_dev_dir)
 975                return;
 976
 977        MWIFIEX_DFS_ADD_FILE(info);
 978        MWIFIEX_DFS_ADD_FILE(debug);
 979        MWIFIEX_DFS_ADD_FILE(getlog);
 980        MWIFIEX_DFS_ADD_FILE(regrdwr);
 981        MWIFIEX_DFS_ADD_FILE(rdeeprom);
 982
 983        MWIFIEX_DFS_ADD_FILE(memrw);
 984        MWIFIEX_DFS_ADD_FILE(hscfg);
 985        MWIFIEX_DFS_ADD_FILE(histogram);
 986        MWIFIEX_DFS_ADD_FILE(debug_mask);
 987        MWIFIEX_DFS_ADD_FILE(timeshare_coex);
 988        MWIFIEX_DFS_ADD_FILE(reset);
 989        MWIFIEX_DFS_ADD_FILE(verext);
 990}
 991
 992/*
 993 * This function removes the debug FS directory structure and the files.
 994 */
 995void
 996mwifiex_dev_debugfs_remove(struct mwifiex_private *priv)
 997{
 998        if (!priv)
 999                return;
1000
1001        debugfs_remove_recursive(priv->dfs_dev_dir);
1002}
1003
1004/*
1005 * This function creates the top level proc directory.
1006 */
1007void
1008mwifiex_debugfs_init(void)
1009{
1010        if (!mwifiex_dfs_dir)
1011                mwifiex_dfs_dir = debugfs_create_dir("mwifiex", NULL);
1012}
1013
1014/*
1015 * This function removes the top level proc directory.
1016 */
1017void
1018mwifiex_debugfs_remove(void)
1019{
1020        debugfs_remove(mwifiex_dfs_dir);
1021}
1022