/*
 * Copyright (c) 2014 Redpine Signals Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

#include <linux/module.h>
#include "rsi_sdio.h"
#include "rsi_common.h"
#include "rsi_coex.h"
#include "rsi_hal.h"

/* Default operating mode is wlan STA + BT */
static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL;
module_param(dev_oper_mode, ushort, 0444);
MODULE_PARM_DESC(dev_oper_mode,
                 "1[Wi-Fi], 4[BT], 8[BT LE], 5[Wi-Fi STA + BT classic]\n"
                 "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
                 "6[AP + BT classic], 14[AP + BT classic + BT LE]");

/**
 * rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg.
 * @rw: Read/write
 * @func: function number
 * @raw: indicates whether to perform read after write
 * @address: address to which to read/write
 * @writedata: data to write
 *
 * Return: argument
 */
static u32 rsi_sdio_set_cmd52_arg(bool rw,
                                  u8 func,
                                  u8 raw,
                                  u32 address,
                                  u8 writedata)
{
        return ((rw & 1) << 31) | ((func & 0x7) << 28) |
                ((raw & 1) << 27) | (1 << 26) |
                ((address & 0x1FFFF) << 9) | (1 << 8) |
                (writedata & 0xFF);
}

/**
 * rsi_cmd52writebyte() - This function issues cmd52 byte write onto the card.
 * @card: Pointer to the mmc_card.
 * @address: Address to write.
 * @byte: Data to write.
 *
 * Return: Write status.
 */
static int rsi_cmd52writebyte(struct mmc_card *card,
                              u32 address,
                              u8 byte)
{
        struct mmc_command io_cmd;
        u32 arg;

        memset(&io_cmd, 0, sizeof(io_cmd));
        arg = rsi_sdio_set_cmd52_arg(1, 0, 0, address, byte);
        io_cmd.opcode = SD_IO_RW_DIRECT;
        io_cmd.arg = arg;
        io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;

        return mmc_wait_for_cmd(card->host, &io_cmd, 0);
}

/**
 * rsi_cmd52readbyte() - This function issues cmd52 byte read onto the card.
 * @card: Pointer to the mmc_card.
 * @address: Address to read from.
 * @byte: Variable to store read value.
 *
 * Return: Read status.
 */
static int rsi_cmd52readbyte(struct mmc_card *card,
                             u32 address,
                             u8 *byte)
{
        struct mmc_command io_cmd;
        u32 arg;
        int err;

        memset(&io_cmd, 0, sizeof(io_cmd));
        arg = rsi_sdio_set_cmd52_arg(0, 0, 0, address, 0);
        io_cmd.opcode = SD_IO_RW_DIRECT;
        io_cmd.arg = arg;
        io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;

        err = mmc_wait_for_cmd(card->host, &io_cmd, 0);
        if ((!err) && (byte))
                *byte =  io_cmd.resp[0] & 0xFF;
        return err;
}

/**
 * rsi_issue_sdiocommand() - This function issues sdio commands.
 * @func: Pointer to the sdio_func structure.
 * @opcode: Opcode value.
 * @arg: Arguments to pass.
 * @flags: Flags which are set.
 * @resp: Pointer to store response.
 *
 * Return: err: command status as 0 or -1.
 */
static int rsi_issue_sdiocommand(struct sdio_func *func,
                                 u32 opcode,
                                 u32 arg,
                                 u32 flags,
                                 u32 *resp)
{
        struct mmc_command cmd;
        struct mmc_host *host;
        int err;

        host = func->card->host;

        memset(&cmd, 0, sizeof(struct mmc_command));
        cmd.opcode = opcode;
        cmd.arg = arg;
        cmd.flags = flags;
        err = mmc_wait_for_cmd(host, &cmd, 3);

        if ((!err) && (resp))
                *resp = cmd.resp[0];

        return err;
}

/**
 * rsi_handle_interrupt() - This function is called upon the occurrence
 *                          of an interrupt.
 * @function: Pointer to the sdio_func structure.
 *
 * Return: None.
 */
static void rsi_handle_interrupt(struct sdio_func *function)
{
        struct rsi_hw *adapter = sdio_get_drvdata(function);
        struct rsi_91x_sdiodev *dev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;

        if (adapter->priv->fsm_state == FSM_FW_NOT_LOADED)
                return;

        rsi_set_event(&dev->rx_thread.event);
}

/**
 * rsi_reset_card() - This function resets and re-initializes the card.
 * @pfunction: Pointer to the sdio_func structure.
 *
 * Return: None.
 */
static void rsi_reset_card(struct sdio_func *pfunction)
{
        int ret = 0;
        int err;
        struct mmc_card *card = pfunction->card;
        struct mmc_host *host = card->host;
        u8 cmd52_resp;
        u32 clock, resp, i;
        u16 rca;

        /* Reset 9110 chip */
        ret = rsi_cmd52writebyte(pfunction->card,
                                 SDIO_CCCR_ABORT,
                                 (1 << 3));

        /* Card will not send any response as it is getting reset immediately
         * Hence expect a timeout status from host controller
         */
        if (ret != -ETIMEDOUT)
                rsi_dbg(ERR_ZONE, "%s: Reset failed : %d\n", __func__, ret);

        /* Wait for few milli seconds to get rid of residue charges if any */
        msleep(20);

        /* Initialize the SDIO card */
        host->ios.chip_select = MMC_CS_DONTCARE;
        host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
        host->ios.power_mode = MMC_POWER_UP;
        host->ios.bus_width = MMC_BUS_WIDTH_1;
        host->ios.timing = MMC_TIMING_LEGACY;
        host->ops->set_ios(host, &host->ios);

        /*
         * This delay should be sufficient to allow the power supply
         * to reach the minimum voltage.
         */
        msleep(20);

        host->ios.clock = host->f_min;
        host->ios.power_mode = MMC_POWER_ON;
        host->ops->set_ios(host, &host->ios);

        /*
         * This delay must be at least 74 clock sizes, or 1 ms, or the
         * time required to reach a stable voltage.
         */
        msleep(20);

        /* Issue CMD0. Goto idle state */
        host->ios.chip_select = MMC_CS_HIGH;
        host->ops->set_ios(host, &host->ios);
        msleep(20);
        err = rsi_issue_sdiocommand(pfunction,
                                    MMC_GO_IDLE_STATE,
                                    0,
                                    (MMC_RSP_NONE | MMC_CMD_BC),
                                    NULL);
        host->ios.chip_select = MMC_CS_DONTCARE;
        host->ops->set_ios(host, &host->ios);
        msleep(20);
        host->use_spi_crc = 0;

        if (err)
                rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err);

        /* Issue CMD5, arg = 0 */
        err = rsi_issue_sdiocommand(pfunction,  SD_IO_SEND_OP_COND, 0,
                                    (MMC_RSP_R4 | MMC_CMD_BCR), &resp);
        if (err)
                rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
                        __func__, err);
        card->ocr = resp;
        /* Issue CMD5, arg = ocr. Wait till card is ready  */
        for (i = 0; i < 100; i++) {
                err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND,
                                            card->ocr,
                                            (MMC_RSP_R4 | MMC_CMD_BCR), &resp);
                if (err) {
                        rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
                                __func__, err);
                        break;
                }

                if (resp & MMC_CARD_BUSY)
                        break;
                msleep(20);
        }

        if ((i == 100) || (err)) {
                rsi_dbg(ERR_ZONE, "%s: card in not ready : %d %d\n",
                        __func__, i, err);
                return;
        }

        /* Issue CMD3, get RCA */
        err = rsi_issue_sdiocommand(pfunction,
                                    SD_SEND_RELATIVE_ADDR,
                                    0,
                                    (MMC_RSP_R6 | MMC_CMD_BCR),
                                    &resp);
        if (err) {
                rsi_dbg(ERR_ZONE, "%s: CMD3 failed : %d\n", __func__, err);
                return;
        }
        rca = resp >> 16;
        host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
        host->ops->set_ios(host, &host->ios);

        /* Issue CMD7, select card  */
        err = rsi_issue_sdiocommand(pfunction,
                                    MMC_SELECT_CARD,
                                    (rca << 16),
                                    (MMC_RSP_R1 | MMC_CMD_AC),
                                    NULL);
        if (err) {
                rsi_dbg(ERR_ZONE, "%s: CMD7 failed : %d\n", __func__, err);
                return;
        }

        /* Enable high speed */
        if (card->host->caps & MMC_CAP_SD_HIGHSPEED) {
                rsi_dbg(ERR_ZONE, "%s: Set high speed mode\n", __func__);
                err = rsi_cmd52readbyte(card, SDIO_CCCR_SPEED, &cmd52_resp);
                if (err) {
                        rsi_dbg(ERR_ZONE, "%s: CCCR speed reg read failed: %d\n",
                                __func__, err);
                } else {
                        err = rsi_cmd52writebyte(card,
                                                 SDIO_CCCR_SPEED,
                                                 (cmd52_resp | SDIO_SPEED_EHS));
                        if (err) {
                                rsi_dbg(ERR_ZONE,
                                        "%s: CCR speed regwrite failed %d\n",
                                        __func__, err);
                                return;
                        }
                        host->ios.timing = MMC_TIMING_SD_HS;
                        host->ops->set_ios(host, &host->ios);
                }
        }

        /* Set clock */
        if (mmc_card_hs(card))
                clock = 50000000;
        else
                clock = card->cis.max_dtr;

        if (clock > host->f_max)
                clock = host->f_max;

        host->ios.clock = clock;
        host->ops->set_ios(host, &host->ios);

        if (card->host->caps & MMC_CAP_4_BIT_DATA) {
                /* CMD52: Set bus width & disable card detect resistor */
                err = rsi_cmd52writebyte(card,
                                         SDIO_CCCR_IF,
                                         (SDIO_BUS_CD_DISABLE |
                                          SDIO_BUS_WIDTH_4BIT));
                if (err) {
                        rsi_dbg(ERR_ZONE, "%s: Set bus mode failed : %d\n",
                                __func__, err);
                        return;
                }
                host->ios.bus_width = MMC_BUS_WIDTH_4;
                host->ops->set_ios(host, &host->ios);
        }
}

/**
 * rsi_setclock() - This function sets the clock frequency.
 * @adapter: Pointer to the adapter structure.
 * @freq: Clock frequency.
 *
 * Return: None.
 */
static void rsi_setclock(struct rsi_hw *adapter, u32 freq)
{
        struct rsi_91x_sdiodev *dev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        struct mmc_host *host = dev->pfunction->card->host;
        u32 clock;

        clock = freq * 1000;
        if (clock > host->f_max)
                clock = host->f_max;
        host->ios.clock = clock;
        host->ops->set_ios(host, &host->ios);
}

/**
 * rsi_setblocklength() - This function sets the host block length.
 * @adapter: Pointer to the adapter structure.
 * @length: Block length to be set.
 *
 * Return: status: 0 on success, -1 on failure.
 */
static int rsi_setblocklength(struct rsi_hw *adapter, u32 length)
{
        struct rsi_91x_sdiodev *dev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        int status;
        rsi_dbg(INIT_ZONE, "%s: Setting the block length\n", __func__);

        status = sdio_set_block_size(dev->pfunction, length);
        dev->pfunction->max_blksize = 256;
        adapter->block_size = dev->pfunction->max_blksize;

        rsi_dbg(INFO_ZONE,
                "%s: Operational blk length is %d\n", __func__, length);
        return status;
}

/**
 * rsi_setupcard() - This function queries and sets the card's features.
 * @adapter: Pointer to the adapter structure.
 *
 * Return: status: 0 on success, -1 on failure.
 */
static int rsi_setupcard(struct rsi_hw *adapter)
{
        struct rsi_91x_sdiodev *dev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        int status = 0;

        rsi_setclock(adapter, 50000);

        dev->tx_blk_size = 256;
        status = rsi_setblocklength(adapter, dev->tx_blk_size);
        if (status)
                rsi_dbg(ERR_ZONE,
                        "%s: Unable to set block length\n", __func__);
        return status;
}

/**
 * rsi_sdio_read_register() - This function reads one byte of information
 *                            from a register.
 * @adapter: Pointer to the adapter structure.
 * @addr: Address of the register.
 * @data: Pointer to the data that stores the data read.
 *
 * Return: 0 on success, -1 on failure.
 */
int rsi_sdio_read_register(struct rsi_hw *adapter,
                           u32 addr,
                           u8 *data)
{
        struct rsi_91x_sdiodev *dev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        u8 fun_num = 0;
        int status;

        if (likely(dev->sdio_irq_task != current))
                sdio_claim_host(dev->pfunction);

        if (fun_num == 0)
                *data = sdio_f0_readb(dev->pfunction, addr, &status);
        else
                *data = sdio_readb(dev->pfunction, addr, &status);

        if (likely(dev->sdio_irq_task != current))
                sdio_release_host(dev->pfunction);

        return status;
}

/**
 * rsi_sdio_write_register() - This function writes one byte of information
 *                             into a register.
 * @adapter: Pointer to the adapter structure.
 * @function: Function Number.
 * @addr: Address of the register.
 * @data: Pointer to the data tha has to be written.
 *
 * Return: 0 on success, -1 on failure.
 */
int rsi_sdio_write_register(struct rsi_hw *adapter,
                            u8 function,
                            u32 addr,
                            u8 *data)
{
        struct rsi_91x_sdiodev *dev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        int status = 0;

        if (likely(dev->sdio_irq_task != current))
                sdio_claim_host(dev->pfunction);

        if (function == 0)
                sdio_f0_writeb(dev->pfunction, *data, addr, &status);
        else
                sdio_writeb(dev->pfunction, *data, addr, &status);

        if (likely(dev->sdio_irq_task != current))
                sdio_release_host(dev->pfunction);

        return status;
}

/**
 * rsi_sdio_ack_intr() - This function acks the interrupt received.
 * @adapter: Pointer to the adapter structure.
 * @int_bit: Interrupt bit to write into register.
 *
 * Return: None.
 */
void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit)
{
        int status;
        status = rsi_sdio_write_register(adapter,
                                         1,
                                         (SDIO_FUN1_INTR_CLR_REG |
                                          RSI_SD_REQUEST_MASTER),
                                         &int_bit);
        if (status)
                rsi_dbg(ERR_ZONE, "%s: unable to send ack\n", __func__);
}



/**
 * rsi_sdio_read_register_multiple() - This function read multiple bytes of
 *                                     information from the SD card.
 * @adapter: Pointer to the adapter structure.
 * @addr: Address of the register.
 * @count: Number of multiple bytes to be read.
 * @data: Pointer to the read data.
 *
 * Return: 0 on success, -1 on failure.
 */
static int rsi_sdio_read_register_multiple(struct rsi_hw *adapter,
                                           u32 addr,
                                           u8 *data,
                                           u16 count)
{
        struct rsi_91x_sdiodev *dev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        u32 status;

        if (likely(dev->sdio_irq_task != current))
                sdio_claim_host(dev->pfunction);

        status =  sdio_readsb(dev->pfunction, data, addr, count);

        if (likely(dev->sdio_irq_task != current))
                sdio_release_host(dev->pfunction);

        if (status != 0)
                rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 read failed\n", __func__);
        return status;
}

/**
 * rsi_sdio_write_register_multiple() - This function writes multiple bytes of
 *                                      information to the SD card.
 * @adapter: Pointer to the adapter structure.
 * @addr: Address of the register.
 * @data: Pointer to the data that has to be written.
 * @count: Number of multiple bytes to be written.
 *
 * Return: 0 on success, -1 on failure.
 */
int rsi_sdio_write_register_multiple(struct rsi_hw *adapter,
                                     u32 addr,
                                     u8 *data,
                                     u16 count)
{
        struct rsi_91x_sdiodev *dev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        int status;

        if (dev->write_fail > 1) {
                rsi_dbg(ERR_ZONE, "%s: Stopping card writes\n", __func__);
                return 0;
        } else if (dev->write_fail == 1) {
                /**
                 * Assuming it is a CRC failure, we want to allow another
                 *  card write
                 */
                rsi_dbg(ERR_ZONE, "%s: Continue card writes\n", __func__);
                dev->write_fail++;
        }

        if (likely(dev->sdio_irq_task != current))
                sdio_claim_host(dev->pfunction);

        status = sdio_writesb(dev->pfunction, addr, data, count);

        if (likely(dev->sdio_irq_task != current))
                sdio_release_host(dev->pfunction);

        if (status) {
                rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 write failed %d\n",
                        __func__, status);
                dev->write_fail = 2;
        } else {
                memcpy(dev->prev_desc, data, FRAME_DESC_SZ);
        }
        return status;
}

static int rsi_sdio_load_data_master_write(struct rsi_hw *adapter,
                                           u32 base_address,
                                           u32 instructions_sz,
                                           u16 block_size,
                                           u8 *ta_firmware)
{
        u32 num_blocks, offset, i;
        u16 msb_address, lsb_address;
        u8 *temp_buf;
        int status;

        num_blocks = instructions_sz / block_size;
        msb_address = base_address >> 16;

        rsi_dbg(INFO_ZONE, "ins_size: %d, num_blocks: %d\n",
                instructions_sz, num_blocks);

        temp_buf = kmalloc(block_size, GFP_KERNEL);
        if (!temp_buf)
                return -ENOMEM;

        /* Loading DM ms word in the sdio slave */
        status = rsi_sdio_master_access_msword(adapter, msb_address);
        if (status < 0) {
                rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n", __func__);
                goto out_free;
        }

        for (offset = 0, i = 0; i < num_blocks; i++, offset += block_size) {
                memcpy(temp_buf, ta_firmware + offset, block_size);
                lsb_address = (u16)base_address;
                status = rsi_sdio_write_register_multiple
                                        (adapter,
                                         lsb_address | RSI_SD_REQUEST_MASTER,
                                         temp_buf, block_size);
                if (status < 0) {
                        rsi_dbg(ERR_ZONE, "%s: failed to write\n", __func__);
                        goto out_free;
                }
                rsi_dbg(INFO_ZONE, "%s: loading block: %d\n", __func__, i);
                base_address += block_size;

                if ((base_address >> 16) != msb_address) {
                        msb_address += 1;

                        /* Loading DM ms word in the sdio slave */
                        status = rsi_sdio_master_access_msword(adapter,
                                                               msb_address);
                        if (status < 0) {
                                rsi_dbg(ERR_ZONE,
                                        "%s: Unable to set ms word reg\n",
                                        __func__);
                                goto out_free;
                        }
                }
        }

        if (instructions_sz % block_size) {
                memset(temp_buf, 0, block_size);
                memcpy(temp_buf, ta_firmware + offset,
                       instructions_sz % block_size);
                lsb_address = (u16)base_address;
                status = rsi_sdio_write_register_multiple
                                        (adapter,
                                         lsb_address | RSI_SD_REQUEST_MASTER,
                                         temp_buf,
                                         instructions_sz % block_size);
                if (status < 0)
                        goto out_free;
                rsi_dbg(INFO_ZONE,
                        "Written Last Block in Address 0x%x Successfully\n",
                        offset | RSI_SD_REQUEST_MASTER);
        }

        status = 0;
out_free:
        kfree(temp_buf);
        return status;
}

#define FLASH_SIZE_ADDR                 0x04000016
static int rsi_sdio_master_reg_read(struct rsi_hw *adapter, u32 addr,
                                    u32 *read_buf, u16 size)
{
        u32 addr_on_bus, *data;
        u16 ms_addr;
        int status;

        data = kzalloc(RSI_MASTER_REG_BUF_SIZE, GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        ms_addr = (addr >> 16);
        status = rsi_sdio_master_access_msword(adapter, ms_addr);
        if (status < 0) {
                rsi_dbg(ERR_ZONE,
                        "%s: Unable to set ms word to common reg\n",
                        __func__);
                goto err;
        }
        addr &= 0xFFFF;

        addr_on_bus = (addr & 0xFF000000);
        if ((addr_on_bus == (FLASH_SIZE_ADDR & 0xFF000000)) ||
            (addr_on_bus == 0x0))
                addr_on_bus = (addr & ~(0x3));
        else
                addr_on_bus = addr;

        /* Bring TA out of reset */
        status = rsi_sdio_read_register_multiple
                                        (adapter,
                                         (addr_on_bus | RSI_SD_REQUEST_MASTER),
                                         (u8 *)data, 4);
        if (status < 0) {
                rsi_dbg(ERR_ZONE, "%s: AHB register read failed\n", __func__);
                goto err;
        }
        if (size == 2) {
                if ((addr & 0x3) == 0)
                        *read_buf = *data;
                else
                        *read_buf  = (*data >> 16);
                *read_buf = (*read_buf & 0xFFFF);
        } else if (size == 1) {
                if ((addr & 0x3) == 0)
                        *read_buf = *data;
                else if ((addr & 0x3) == 1)
                        *read_buf = (*data >> 8);
                else if ((addr & 0x3) == 2)
                        *read_buf = (*data >> 16);
                else
                        *read_buf = (*data >> 24);
                *read_buf = (*read_buf & 0xFF);
        } else {
                *read_buf = *data;
        }

err:
        kfree(data);
        return status;
}

static int rsi_sdio_master_reg_write(struct rsi_hw *adapter,
                                     unsigned long addr,
                                     unsigned long data, u16 size)
{
        unsigned long *data_aligned;
        int status;

        data_aligned = kzalloc(RSI_MASTER_REG_BUF_SIZE, GFP_KERNEL);
        if (!data_aligned)
                return -ENOMEM;

        if (size == 2) {
                *data_aligned = ((data << 16) | (data & 0xFFFF));
        } else if (size == 1) {
                u32 temp_data = data & 0xFF;

                *data_aligned = ((temp_data << 24) | (temp_data << 16) |
                                 (temp_data << 8) | temp_data);
        } else {
                *data_aligned = data;
        }
        size = 4;

        status = rsi_sdio_master_access_msword(adapter, (addr >> 16));
        if (status < 0) {
                rsi_dbg(ERR_ZONE,
                        "%s: Unable to set ms word to common reg\n",
                        __func__);
                kfree(data_aligned);
                return -EIO;
        }
        addr = addr & 0xFFFF;

        /* Bring TA out of reset */
        status = rsi_sdio_write_register_multiple
                                        (adapter,
                                         (addr | RSI_SD_REQUEST_MASTER),
                                         (u8 *)data_aligned, size);
        if (status < 0)
                rsi_dbg(ERR_ZONE,
                        "%s: Unable to do AHB reg write\n", __func__);

        kfree(data_aligned);
        return status;
}

/**
 * rsi_sdio_host_intf_write_pkt() - This function writes the packet to device.
 * @adapter: Pointer to the adapter structure.
 * @pkt: Pointer to the data to be written on to the device.
 * @len: length of the data to be written on to the device.
 *
 * Return: 0 on success, -1 on failure.
 */
static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
                                        u8 *pkt,
                                        u32 len)
{
        struct rsi_91x_sdiodev *dev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        u32 block_size = dev->tx_blk_size;
        u32 num_blocks, address, length;
        u32 queueno;
        int status;

        queueno = ((pkt[1] >> 4) & 0xf);
        if (queueno == RSI_BT_MGMT_Q || queueno == RSI_BT_DATA_Q)
                queueno = RSI_BT_Q;

        num_blocks = len / block_size;

        if (len % block_size)
                num_blocks++;

        address = (num_blocks * block_size | (queueno << 12));
        length  = num_blocks * block_size;

        status = rsi_sdio_write_register_multiple(adapter,
                                                  address,
                                                  (u8 *)pkt,
                                                  length);
        if (status)
                rsi_dbg(ERR_ZONE, "%s: Unable to write onto the card: %d\n",
                        __func__, status);
        rsi_dbg(DATA_TX_ZONE, "%s: Successfully written onto card\n", __func__);
        return status;
}

/**
 * rsi_sdio_host_intf_read_pkt() - This function reads the packet
 *                                 from the device.
 * @adapter: Pointer to the adapter data structure.
 * @pkt: Pointer to the packet data to be read from the the device.
 * @length: Length of the data to be read from the device.
 *
 * Return: 0 on success, -1 on failure.
 */
int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
                                u8 *pkt,
                                u32 length)
{
        int status = -EINVAL;

        if (!length) {
                rsi_dbg(ERR_ZONE, "%s: Pkt size is zero\n", __func__);
                return status;
        }

        status = rsi_sdio_read_register_multiple(adapter,
                                                 length,
                                                 (u8 *)pkt,
                                                 length); /*num of bytes*/

        if (status)
                rsi_dbg(ERR_ZONE, "%s: Failed to read frame: %d\n", __func__,
                        status);
        return status;
}

/**
 * rsi_init_sdio_interface() - This function does init specific to SDIO.
 *
 * @adapter: Pointer to the adapter data structure.
 * @pfunction: Pointer to the sdio_func structure.
 *
 * Return: 0 on success, -1 on failure.
 */
static int rsi_init_sdio_interface(struct rsi_hw *adapter,
                                   struct sdio_func *pfunction)
{
        struct rsi_91x_sdiodev *rsi_91x_dev;
        int status;

        rsi_91x_dev = kzalloc(sizeof(*rsi_91x_dev), GFP_KERNEL);
        if (!rsi_91x_dev)
                return -ENOMEM;

        adapter->rsi_dev = rsi_91x_dev;

        sdio_claim_host(pfunction);

        pfunction->enable_timeout = 100;
        status = sdio_enable_func(pfunction);
        if (status) {
                rsi_dbg(ERR_ZONE, "%s: Failed to enable interface\n", __func__);
                sdio_release_host(pfunction);
                return status;
        }

        rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);

        rsi_91x_dev->pfunction = pfunction;
        adapter->device = &pfunction->dev;

        sdio_set_drvdata(pfunction, adapter);

        status = rsi_setupcard(adapter);
        if (status) {
                rsi_dbg(ERR_ZONE, "%s: Failed to setup card\n", __func__);
                goto fail;
        }

        rsi_dbg(INIT_ZONE, "%s: Setup card successfully\n", __func__);

        status = rsi_init_sdio_slave_regs(adapter);
        if (status) {
                rsi_dbg(ERR_ZONE, "%s: Failed to init slave regs\n", __func__);
                goto fail;
        }
        sdio_release_host(pfunction);

        adapter->determine_event_timeout = rsi_sdio_determine_event_timeout;
        adapter->check_hw_queue_status = rsi_sdio_check_buffer_status;

#ifdef CONFIG_RSI_DEBUGFS
        adapter->num_debugfs_entries = MAX_DEBUGFS_ENTRIES;
#endif
        return 0;
fail:
        sdio_disable_func(pfunction);
        sdio_release_host(pfunction);
        return status;
}

static int rsi_sdio_reinit_device(struct rsi_hw *adapter)
{
        struct rsi_91x_sdiodev *sdev = adapter->rsi_dev;
        struct sdio_func *pfunction = sdev->pfunction;
        int ii;

        for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
                skb_queue_purge(&adapter->priv->tx_queue[ii]);

        /* Initialize device again */
        sdio_claim_host(pfunction);

        sdio_release_irq(pfunction);
        rsi_reset_card(pfunction);

        sdio_enable_func(pfunction);
        rsi_setupcard(adapter);
        rsi_init_sdio_slave_regs(adapter);
        sdio_claim_irq(pfunction, rsi_handle_interrupt);
        rsi_hal_device_init(adapter);

        sdio_release_host(pfunction);

        return 0;
}

static int rsi_sdio_ta_reset(struct rsi_hw *adapter)
{
        int status;
        u32 addr;
        u8 *data;

        data = kzalloc(RSI_9116_REG_SIZE, GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        status = rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR);
        if (status < 0) {
                rsi_dbg(ERR_ZONE,
                        "Unable to set ms word to common reg\n");
                goto err;
        }

        rsi_dbg(INIT_ZONE, "%s: Bring TA out of reset\n", __func__);
        put_unaligned_le32(TA_HOLD_THREAD_VALUE, data);
        addr = TA_HOLD_THREAD_REG | RSI_SD_REQUEST_MASTER;
        status = rsi_sdio_write_register_multiple(adapter, addr,
                                                  (u8 *)data,
                                                  RSI_9116_REG_SIZE);
        if (status < 0) {
                rsi_dbg(ERR_ZONE, "Unable to hold TA threads\n");
                goto err;
        }

        put_unaligned_le32(TA_SOFT_RST_CLR, data);
        addr = TA_SOFT_RESET_REG | RSI_SD_REQUEST_MASTER;
        status = rsi_sdio_write_register_multiple(adapter, addr,
                                                  (u8 *)data,
                                                  RSI_9116_REG_SIZE);
        if (status < 0) {
                rsi_dbg(ERR_ZONE, "Unable to get TA out of reset\n");
                goto err;
        }

        put_unaligned_le32(TA_PC_ZERO, data);
        addr = TA_TH0_PC_REG | RSI_SD_REQUEST_MASTER;
        status = rsi_sdio_write_register_multiple(adapter, addr,
                                                  (u8 *)data,
                                                  RSI_9116_REG_SIZE);
        if (status < 0) {
                rsi_dbg(ERR_ZONE, "Unable to Reset TA PC value\n");
                status = -EINVAL;
                goto err;
        }

        put_unaligned_le32(TA_RELEASE_THREAD_VALUE, data);
        addr = TA_RELEASE_THREAD_REG | RSI_SD_REQUEST_MASTER;
        status = rsi_sdio_write_register_multiple(adapter, addr,
                                                  (u8 *)data,
                                                  RSI_9116_REG_SIZE);
        if (status < 0) {
                rsi_dbg(ERR_ZONE, "Unable to release TA threads\n");
                goto err;
        }

        status = rsi_sdio_master_access_msword(adapter, MISC_CFG_BASE_ADDR);
        if (status < 0) {
                rsi_dbg(ERR_ZONE, "Unable to set ms word to common reg\n");
                goto err;
        }
        rsi_dbg(INIT_ZONE, "***** TA Reset done *****\n");

err:
        kfree(data);
        return status;
}

static struct rsi_host_intf_ops sdio_host_intf_ops = {
        .write_pkt              = rsi_sdio_host_intf_write_pkt,
        .read_pkt               = rsi_sdio_host_intf_read_pkt,
        .master_access_msword   = rsi_sdio_master_access_msword,
        .read_reg_multiple      = rsi_sdio_read_register_multiple,
        .write_reg_multiple     = rsi_sdio_write_register_multiple,
        .master_reg_read        = rsi_sdio_master_reg_read,
        .master_reg_write       = rsi_sdio_master_reg_write,
        .load_data_master_write = rsi_sdio_load_data_master_write,
        .reinit_device          = rsi_sdio_reinit_device,

        .ta_reset               = rsi_sdio_ta_reset,
};

/**
 * rsi_probe() - This function is called by kernel when the driver provided
 *               Vendor and device IDs are matched. All the initialization
 *               work is done here.
 * @pfunction: Pointer to the sdio_func structure.
 * @id: Pointer to sdio_device_id structure.
 *
 * Return: 0 on success, 1 on failure.
 */
static int rsi_probe(struct sdio_func *pfunction,
                     const struct sdio_device_id *id)
{
        struct rsi_hw *adapter;
        struct rsi_91x_sdiodev *sdev;
        int status = -EINVAL;

        rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);

        adapter = rsi_91x_init(dev_oper_mode);
        if (!adapter) {
                rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
                        __func__);
                return -EINVAL;
        }
        adapter->rsi_host_intf = RSI_HOST_INTF_SDIO;
        adapter->host_intf_ops = &sdio_host_intf_ops;

        if (rsi_init_sdio_interface(adapter, pfunction)) {
                rsi_dbg(ERR_ZONE, "%s: Failed to init sdio interface\n",
                        __func__);
                status = -EIO;
                goto fail_free_adapter;
        }

        if (pfunction->device == SDIO_DEVICE_ID_RSI_9113) {
                rsi_dbg(ERR_ZONE, "%s: 9113 module detected\n", __func__);
                adapter->device_model = RSI_DEV_9113;
        } else  if (pfunction->device == SDIO_DEVICE_ID_RSI_9116) {
                rsi_dbg(ERR_ZONE, "%s: 9116 module detected\n", __func__);
                adapter->device_model = RSI_DEV_9116;
        } else {
                rsi_dbg(ERR_ZONE,
                        "%s: Unsupported RSI device id 0x%x\n", __func__,
                        pfunction->device);
                goto fail_free_adapter;
        }

        sdev = (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        rsi_init_event(&sdev->rx_thread.event);
        status = rsi_create_kthread(adapter->priv, &sdev->rx_thread,
                                    rsi_sdio_rx_thread, "SDIO-RX-Thread");
        if (status) {
                rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__);
                goto fail_kill_thread;
        }

        sdio_claim_host(pfunction);
        if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) {
                rsi_dbg(ERR_ZONE, "%s: Failed to request IRQ\n", __func__);
                sdio_release_host(pfunction);
                status = -EIO;
                goto fail_claim_irq;
        }
        sdio_release_host(pfunction);
        rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__);

        if (rsi_hal_device_init(adapter)) {
                rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", __func__);
                status = -EINVAL;
                goto fail_dev_init;
        }
        rsi_dbg(INFO_ZONE, "===> RSI Device Init Done <===\n");

        if (rsi_sdio_master_access_msword(adapter, MISC_CFG_BASE_ADDR)) {
                rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n", __func__);
                status = -EIO;
                goto fail_dev_init;
        }

        adapter->priv->hibernate_resume = false;
        adapter->priv->reinit_hw = false;
        return 0;

fail_dev_init:
        sdio_claim_host(pfunction);
        sdio_release_irq(pfunction);
        sdio_release_host(pfunction);
fail_claim_irq:
        rsi_kill_thread(&sdev->rx_thread);
fail_kill_thread:
        sdio_claim_host(pfunction);
        sdio_disable_func(pfunction);
        sdio_release_host(pfunction);
fail_free_adapter:
        rsi_91x_deinit(adapter);
        rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__);
        return status;
}

static void ulp_read_write(struct rsi_hw *adapter, u16 addr, u32 data,
                           u16 len_in_bits)
{
        rsi_sdio_master_reg_write(adapter, RSI_GSPI_DATA_REG1,
                                  ((addr << 6) | ((data >> 16) & 0xffff)), 2);
        rsi_sdio_master_reg_write(adapter, RSI_GSPI_DATA_REG0,
                                  (data & 0xffff), 2);
        rsi_sdio_master_reg_write(adapter, RSI_GSPI_CTRL_REG0,
                                  RSI_GSPI_CTRL_REG0_VALUE, 2);
        rsi_sdio_master_reg_write(adapter, RSI_GSPI_CTRL_REG1,
                                  ((len_in_bits - 1) | RSI_GSPI_TRIG), 2);
        msleep(20);
}

/*This function resets and re-initializes the chip.*/
static void rsi_reset_chip(struct rsi_hw *adapter)
{
        u8 *data;
        u8 sdio_interrupt_status = 0;
        u8 request = 1;
        int ret;

        data = kzalloc(sizeof(u32), GFP_KERNEL);
        if (!data)
                return;

        rsi_dbg(INFO_ZONE, "Writing disable to wakeup register\n");
        ret =  rsi_sdio_write_register(adapter, 0, SDIO_WAKEUP_REG, &request);
        if (ret < 0) {
                rsi_dbg(ERR_ZONE,
                        "%s: Failed to write SDIO wakeup register\n", __func__);
                goto err;
        }
        msleep(20);
        ret =  rsi_sdio_read_register(adapter, RSI_FN1_INT_REGISTER,
                                      &sdio_interrupt_status);
        if (ret < 0) {
                rsi_dbg(ERR_ZONE, "%s: Failed to Read Intr Status Register\n",
                        __func__);
                goto err;
        }
        rsi_dbg(INFO_ZONE, "%s: Intr Status Register value = %d\n",
                __func__, sdio_interrupt_status);

        /* Put Thread-Arch processor on hold */
        if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
                rsi_dbg(ERR_ZONE,
                        "%s: Unable to set ms word to common reg\n",
                        __func__);
                goto err;
        }

        put_unaligned_le32(TA_HOLD_THREAD_VALUE, data);
        if (rsi_sdio_write_register_multiple(adapter, TA_HOLD_THREAD_REG |
                                             RSI_SD_REQUEST_MASTER,
                                             data, 4)) {
                rsi_dbg(ERR_ZONE,
                        "%s: Unable to hold Thread-Arch processor threads\n",
                        __func__);
                goto err;
        }

        /* This msleep will ensure Thread-Arch processor to go to hold
         * and any pending dma transfers to rf spi in device to finish.
         */
        msleep(100);
        if (adapter->device_model != RSI_DEV_9116) {
                ulp_read_write(adapter, RSI_ULP_RESET_REG, RSI_ULP_WRITE_0, 32);
                ulp_read_write(adapter,
                               RSI_WATCH_DOG_TIMER_1, RSI_ULP_WRITE_2, 32);
                ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_2, RSI_ULP_WRITE_0,
                               32);
                ulp_read_write(adapter, RSI_WATCH_DOG_DELAY_TIMER_1,
                               RSI_ULP_WRITE_50, 32);
                ulp_read_write(adapter, RSI_WATCH_DOG_DELAY_TIMER_2,
                               RSI_ULP_WRITE_0, 32);
                ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_ENABLE,
                               RSI_ULP_TIMER_ENABLE, 32);
        } else {
                if ((rsi_sdio_master_reg_write(adapter,
                                               NWP_WWD_INTERRUPT_TIMER,
                                               NWP_WWD_INT_TIMER_CLKS,
                                               RSI_9116_REG_SIZE)) < 0) {
                        rsi_dbg(ERR_ZONE, "Failed to write to intr timer\n");
                }
                if ((rsi_sdio_master_reg_write(adapter,
                                               NWP_WWD_SYSTEM_RESET_TIMER,
                                               NWP_WWD_SYS_RESET_TIMER_CLKS,
                                               RSI_9116_REG_SIZE)) < 0) {
                        rsi_dbg(ERR_ZONE,
                                "Failed to write to system reset timer\n");
                }
                if ((rsi_sdio_master_reg_write(adapter,
                                               NWP_WWD_MODE_AND_RSTART,
                                               NWP_WWD_TIMER_DISABLE,
                                               RSI_9116_REG_SIZE)) < 0) {
                        rsi_dbg(ERR_ZONE,
                                "Failed to write to mode and restart\n");
                }
                rsi_dbg(ERR_ZONE, "***** Watch Dog Reset Successful *****\n");
        }
        /* This msleep will be sufficient for the ulp
         * read write operations to complete for chip reset.
         */
        msleep(500);
err:
        kfree(data);
        return;
}

/**
 * rsi_disconnect() - This function performs the reverse of the probe function.
 * @pfunction: Pointer to the sdio_func structure.
 *
 * Return: void.
 */
static void rsi_disconnect(struct sdio_func *pfunction)
{
        struct rsi_hw *adapter = sdio_get_drvdata(pfunction);
        struct rsi_91x_sdiodev *dev;

        if (!adapter)
                return;

        dev = (struct rsi_91x_sdiodev *)adapter->rsi_dev;

        rsi_kill_thread(&dev->rx_thread);
        sdio_claim_host(pfunction);
        sdio_release_irq(pfunction);
        sdio_release_host(pfunction);
        mdelay(10);

        rsi_mac80211_detach(adapter);
        mdelay(10);

        if (IS_ENABLED(CONFIG_RSI_COEX) && adapter->priv->coex_mode > 1 &&
            adapter->priv->bt_adapter) {
                rsi_bt_ops.detach(adapter->priv->bt_adapter);
                adapter->priv->bt_adapter = NULL;
        }

        /* Reset Chip */
        rsi_reset_chip(adapter);

        /* Resetting to take care of the case, where-in driver is re-loaded */
        sdio_claim_host(pfunction);
        rsi_reset_card(pfunction);
        sdio_disable_func(pfunction);
        sdio_release_host(pfunction);
        dev->write_fail = 2;
        rsi_91x_deinit(adapter);
        rsi_dbg(ERR_ZONE, "##### RSI SDIO device disconnected #####\n");

}

#ifdef CONFIG_PM
static int rsi_set_sdio_pm_caps(struct rsi_hw *adapter)
{
        struct rsi_91x_sdiodev *dev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        struct sdio_func *func = dev->pfunction;
        int ret;

        ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
        if (ret)
                rsi_dbg(ERR_ZONE, "Set sdio keep pwr flag failed: %d\n", ret);

        return ret;
}

static int rsi_sdio_disable_interrupts(struct sdio_func *pfunc)
{
        struct rsi_hw *adapter = sdio_get_drvdata(pfunc);
        u8 isr_status = 0, data = 0;
        int ret;
        unsigned long t1;

        rsi_dbg(INFO_ZONE, "Waiting for interrupts to be cleared..");
        t1 = jiffies;
        do {
                rsi_sdio_read_register(adapter, RSI_FN1_INT_REGISTER,
                                       &isr_status);
                rsi_dbg(INFO_ZONE, ".");
        } while ((isr_status) && (jiffies_to_msecs(jiffies - t1) < 20));
        rsi_dbg(INFO_ZONE, "Interrupts cleared\n");

        sdio_claim_host(pfunc);
        ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data);
        if (ret < 0) {
                rsi_dbg(ERR_ZONE,
                        "%s: Failed to read int enable register\n",
                        __func__);
                goto done;
        }

        data &= RSI_INT_ENABLE_MASK;
        ret = rsi_cmd52writebyte(pfunc->card, RSI_INT_ENABLE_REGISTER, data);
        if (ret < 0) {
                rsi_dbg(ERR_ZONE,
                        "%s: Failed to write to int enable register\n",
                        __func__);
                goto done;
        }
        ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data);
        if (ret < 0) {
                rsi_dbg(ERR_ZONE,
                        "%s: Failed to read int enable register\n",
                        __func__);
                goto done;
        }
        rsi_dbg(INFO_ZONE, "int enable reg content = %x\n", data);

done:
        sdio_release_host(pfunc);
        return ret;
}

static int rsi_sdio_enable_interrupts(struct sdio_func *pfunc)
{
        u8 data;
        int ret;
        struct rsi_hw *adapter = sdio_get_drvdata(pfunc);
        struct rsi_common *common = adapter->priv;

        sdio_claim_host(pfunc);
        ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data);
        if (ret < 0) {
                rsi_dbg(ERR_ZONE,
                        "%s: Failed to read int enable register\n", __func__);
                goto done;
        }

        data |= ~RSI_INT_ENABLE_MASK & 0xff;

        ret = rsi_cmd52writebyte(pfunc->card, RSI_INT_ENABLE_REGISTER, data);
        if (ret < 0) {
                rsi_dbg(ERR_ZONE,
                        "%s: Failed to write to int enable register\n",
                        __func__);
                goto done;
        }

        if ((common->wow_flags & RSI_WOW_ENABLED) &&
            (common->wow_flags & RSI_WOW_NO_CONNECTION))
                rsi_dbg(ERR_ZONE,
                        "##### Device can not wake up through WLAN\n");

        ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data);
        if (ret < 0) {
                rsi_dbg(ERR_ZONE,
                        "%s: Failed to read int enable register\n", __func__);
                goto done;
        }
        rsi_dbg(INFO_ZONE, "int enable reg content = %x\n", data);

done:
        sdio_release_host(pfunc);
        return ret;
}

static int rsi_suspend(struct device *dev)
{
        int ret;
        struct sdio_func *pfunction = dev_to_sdio_func(dev);
        struct rsi_hw *adapter = sdio_get_drvdata(pfunction);
        struct rsi_common *common;

        if (!adapter) {
                rsi_dbg(ERR_ZONE, "Device is not ready\n");
                return -ENODEV;
        }
        common = adapter->priv;
        rsi_sdio_disable_interrupts(pfunction);

        ret = rsi_set_sdio_pm_caps(adapter);
        if (ret)
                rsi_dbg(INFO_ZONE,
                        "Setting power management caps failed\n");
        common->fsm_state = FSM_CARD_NOT_READY;

        return 0;
}

static int rsi_resume(struct device *dev)
{
        struct sdio_func *pfunction = dev_to_sdio_func(dev);
        struct rsi_hw *adapter = sdio_get_drvdata(pfunction);
        struct rsi_common *common = adapter->priv;

        common->fsm_state = FSM_MAC_INIT_DONE;
        rsi_sdio_enable_interrupts(pfunction);

        return 0;
}

static int rsi_freeze(struct device *dev)
{
        int ret;
        struct sdio_func *pfunction = dev_to_sdio_func(dev);
        struct rsi_hw *adapter = sdio_get_drvdata(pfunction);
        struct rsi_common *common;
        struct rsi_91x_sdiodev *sdev;

        rsi_dbg(INFO_ZONE, "SDIO Bus freeze ===>\n");

        if (!adapter) {
                rsi_dbg(ERR_ZONE, "Device is not ready\n");
                return -ENODEV;
        }
        common = adapter->priv;
        sdev = (struct rsi_91x_sdiodev *)adapter->rsi_dev;

        if ((common->wow_flags & RSI_WOW_ENABLED) &&
            (common->wow_flags & RSI_WOW_NO_CONNECTION))
                rsi_dbg(ERR_ZONE,
                        "##### Device can not wake up through WLAN\n");

        if (IS_ENABLED(CONFIG_RSI_COEX) && common->coex_mode > 1 &&
            common->bt_adapter) {
                rsi_bt_ops.detach(common->bt_adapter);
                common->bt_adapter = NULL;
        }

        ret = rsi_sdio_disable_interrupts(pfunction);

        if (sdev->write_fail)
                rsi_dbg(INFO_ZONE, "###### Device is not ready #######\n");

        ret = rsi_set_sdio_pm_caps(adapter);
        if (ret)
                rsi_dbg(INFO_ZONE, "Setting power management caps failed\n");

        rsi_dbg(INFO_ZONE, "***** RSI module freezed *****\n");

        return 0;
}

static int rsi_thaw(struct device *dev)
{
        struct sdio_func *pfunction = dev_to_sdio_func(dev);
        struct rsi_hw *adapter = sdio_get_drvdata(pfunction);
        struct rsi_common *common = adapter->priv;

        rsi_dbg(ERR_ZONE, "SDIO Bus thaw =====>\n");

        common->hibernate_resume = true;
        common->fsm_state = FSM_CARD_NOT_READY;
        common->iface_down = true;

        rsi_sdio_enable_interrupts(pfunction);

        rsi_dbg(INFO_ZONE, "***** RSI module thaw done *****\n");

        return 0;
}

static void rsi_shutdown(struct device *dev)
{
        struct sdio_func *pfunction = dev_to_sdio_func(dev);
        struct rsi_hw *adapter = sdio_get_drvdata(pfunction);
        struct rsi_91x_sdiodev *sdev =
                (struct rsi_91x_sdiodev *)adapter->rsi_dev;
        struct ieee80211_hw *hw = adapter->hw;

        rsi_dbg(ERR_ZONE, "SDIO Bus shutdown =====>\n");

        if (hw) {
                struct cfg80211_wowlan *wowlan = hw->wiphy->wowlan_config;

                if (rsi_config_wowlan(adapter, wowlan))
                        rsi_dbg(ERR_ZONE, "Failed to configure WoWLAN\n");
        }

        if (IS_ENABLED(CONFIG_RSI_COEX) && adapter->priv->coex_mode > 1 &&
            adapter->priv->bt_adapter) {
                rsi_bt_ops.detach(adapter->priv->bt_adapter);
                adapter->priv->bt_adapter = NULL;
        }

        rsi_sdio_disable_interrupts(sdev->pfunction);

        if (sdev->write_fail)
                rsi_dbg(INFO_ZONE, "###### Device is not ready #######\n");

        if (rsi_set_sdio_pm_caps(adapter))
                rsi_dbg(INFO_ZONE, "Setting power management caps failed\n");

        rsi_dbg(INFO_ZONE, "***** RSI module shut down *****\n");
}

static int rsi_restore(struct device *dev)
{
        struct sdio_func *pfunction = dev_to_sdio_func(dev);
        struct rsi_hw *adapter = sdio_get_drvdata(pfunction);
        struct rsi_common *common = adapter->priv;

        rsi_dbg(INFO_ZONE, "SDIO Bus restore ======>\n");
        common->hibernate_resume = true;
        common->fsm_state = FSM_FW_NOT_LOADED;
        common->iface_down = true;

        adapter->sc_nvifs = 0;
        adapter->ps_state = PS_NONE;

        common->wow_flags = 0;
        common->iface_down = false;

        rsi_dbg(INFO_ZONE, "RSI module restored\n");

        return 0;
}
static const struct dev_pm_ops rsi_pm_ops = {
        .suspend = rsi_suspend,
        .resume_noirq = rsi_resume,
        .freeze = rsi_freeze,
        .thaw = rsi_thaw,
        .restore = rsi_restore,
};
#endif

static const struct sdio_device_id rsi_dev_table[] =  {
        { SDIO_DEVICE(SDIO_VENDOR_ID_RSI, SDIO_DEVICE_ID_RSI_9113) },
        { SDIO_DEVICE(SDIO_VENDOR_ID_RSI, SDIO_DEVICE_ID_RSI_9116) },
        { /* Blank */},
};

static struct sdio_driver rsi_driver = {
        .name       = "RSI-SDIO WLAN",
        .probe      = rsi_probe,
        .remove     = rsi_disconnect,
        .id_table   = rsi_dev_table,
#ifdef CONFIG_PM
        .drv = {
                .pm = &rsi_pm_ops,
                .shutdown   = rsi_shutdown,
        }
#endif
};

/**
 * rsi_module_init() - This function registers the sdio module.
 * @void: Void.
 *
 * Return: 0 on success.
 */
static int rsi_module_init(void)
{
        int ret;

        ret = sdio_register_driver(&rsi_driver);
        rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__);
        return ret;
}

/**
 * rsi_module_exit() - This function unregisters the sdio module.
 * @void: Void.
 *
 * Return: None.
 */
static void rsi_module_exit(void)
{
        sdio_unregister_driver(&rsi_driver);
        rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__);
}

module_init(rsi_module_init);
module_exit(rsi_module_exit);

MODULE_AUTHOR("Redpine Signals Inc");
MODULE_DESCRIPTION("Common SDIO layer for RSI drivers");
MODULE_DEVICE_TABLE(sdio, rsi_dev_table);
MODULE_FIRMWARE(FIRMWARE_RSI9113);
MODULE_VERSION("0.1");
MODULE_LICENSE("Dual BSD/GPL");