linux/drivers/net/wireless/st/cw1200/debug.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * mac80211 glue code for mac80211 ST-Ericsson CW1200 drivers
   4 * DebugFS code
   5 *
   6 * Copyright (c) 2010, ST-Ericsson
   7 * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
   8 */
   9
  10#include <linux/module.h>
  11#include <linux/debugfs.h>
  12#include <linux/seq_file.h>
  13#include "cw1200.h"
  14#include "debug.h"
  15#include "fwio.h"
  16
  17/* join_status */
  18static const char * const cw1200_debug_join_status[] = {
  19        "passive",
  20        "monitor",
  21        "station (joining)",
  22        "station (not authenticated yet)",
  23        "station",
  24        "adhoc",
  25        "access point",
  26};
  27
  28/* WSM_JOIN_PREAMBLE_... */
  29static const char * const cw1200_debug_preamble[] = {
  30        "long",
  31        "short",
  32        "long on 1 and 2 Mbps",
  33};
  34
  35
  36static const char * const cw1200_debug_link_id[] = {
  37        "OFF",
  38        "REQ",
  39        "SOFT",
  40        "HARD",
  41        "RESET",
  42        "RESET_REMAP",
  43};
  44
  45static const char *cw1200_debug_mode(int mode)
  46{
  47        switch (mode) {
  48        case NL80211_IFTYPE_UNSPECIFIED:
  49                return "unspecified";
  50        case NL80211_IFTYPE_MONITOR:
  51                return "monitor";
  52        case NL80211_IFTYPE_STATION:
  53                return "station";
  54        case NL80211_IFTYPE_ADHOC:
  55                return "adhoc";
  56        case NL80211_IFTYPE_MESH_POINT:
  57                return "mesh point";
  58        case NL80211_IFTYPE_AP:
  59                return "access point";
  60        case NL80211_IFTYPE_P2P_CLIENT:
  61                return "p2p client";
  62        case NL80211_IFTYPE_P2P_GO:
  63                return "p2p go";
  64        default:
  65                return "unsupported";
  66        }
  67}
  68
  69static void cw1200_queue_status_show(struct seq_file *seq,
  70                                     struct cw1200_queue *q)
  71{
  72        int i;
  73        seq_printf(seq, "Queue       %d:\n", q->queue_id);
  74        seq_printf(seq, "  capacity: %zu\n", q->capacity);
  75        seq_printf(seq, "  queued:   %zu\n", q->num_queued);
  76        seq_printf(seq, "  pending:  %zu\n", q->num_pending);
  77        seq_printf(seq, "  sent:     %zu\n", q->num_sent);
  78        seq_printf(seq, "  locked:   %s\n", q->tx_locked_cnt ? "yes" : "no");
  79        seq_printf(seq, "  overfull: %s\n", q->overfull ? "yes" : "no");
  80        seq_puts(seq,   "  link map: 0-> ");
  81        for (i = 0; i < q->stats->map_capacity; ++i)
  82                seq_printf(seq, "%.2d ", q->link_map_cache[i]);
  83        seq_printf(seq, "<-%zu\n", q->stats->map_capacity);
  84}
  85
  86static void cw1200_debug_print_map(struct seq_file *seq,
  87                                   struct cw1200_common *priv,
  88                                   const char *label,
  89                                   u32 map)
  90{
  91        int i;
  92        seq_printf(seq, "%s0-> ", label);
  93        for (i = 0; i < priv->tx_queue_stats.map_capacity; ++i)
  94                seq_printf(seq, "%s ", (map & BIT(i)) ? "**" : "..");
  95        seq_printf(seq, "<-%zu\n", priv->tx_queue_stats.map_capacity - 1);
  96}
  97
  98static int cw1200_status_show(struct seq_file *seq, void *v)
  99{
 100        int i;
 101        struct list_head *item;
 102        struct cw1200_common *priv = seq->private;
 103        struct cw1200_debug_priv *d = priv->debug;
 104
 105        seq_puts(seq,   "CW1200 Wireless LAN driver status\n");
 106        seq_printf(seq, "Hardware:   %d.%d\n",
 107                   priv->wsm_caps.hw_id,
 108                   priv->wsm_caps.hw_subid);
 109        seq_printf(seq, "Firmware:   %s %d.%d\n",
 110                   cw1200_fw_types[priv->wsm_caps.fw_type],
 111                   priv->wsm_caps.fw_ver,
 112                   priv->wsm_caps.fw_build);
 113        seq_printf(seq, "FW API:     %d\n",
 114                   priv->wsm_caps.fw_api);
 115        seq_printf(seq, "FW caps:    0x%.4X\n",
 116                   priv->wsm_caps.fw_cap);
 117        seq_printf(seq, "FW label:  '%s'\n",
 118                   priv->wsm_caps.fw_label);
 119        seq_printf(seq, "Mode:       %s%s\n",
 120                   cw1200_debug_mode(priv->mode),
 121                   priv->listening ? " (listening)" : "");
 122        seq_printf(seq, "Join state: %s\n",
 123                   cw1200_debug_join_status[priv->join_status]);
 124        if (priv->channel)
 125                seq_printf(seq, "Channel:    %d%s\n",
 126                           priv->channel->hw_value,
 127                           priv->channel_switch_in_progress ?
 128                           " (switching)" : "");
 129        if (priv->rx_filter.promiscuous)
 130                seq_puts(seq,   "Filter:     promisc\n");
 131        else if (priv->rx_filter.fcs)
 132                seq_puts(seq,   "Filter:     fcs\n");
 133        if (priv->rx_filter.bssid)
 134                seq_puts(seq,   "Filter:     bssid\n");
 135        if (!priv->disable_beacon_filter)
 136                seq_puts(seq,   "Filter:     beacons\n");
 137
 138        if (priv->enable_beacon ||
 139            priv->mode == NL80211_IFTYPE_AP ||
 140            priv->mode == NL80211_IFTYPE_ADHOC ||
 141            priv->mode == NL80211_IFTYPE_MESH_POINT ||
 142            priv->mode == NL80211_IFTYPE_P2P_GO)
 143                seq_printf(seq, "Beaconing:  %s\n",
 144                           priv->enable_beacon ?
 145                           "enabled" : "disabled");
 146
 147        for (i = 0; i < 4; ++i)
 148                seq_printf(seq, "EDCA(%d):    %d, %d, %d, %d, %d\n", i,
 149                           priv->edca.params[i].cwmin,
 150                           priv->edca.params[i].cwmax,
 151                           priv->edca.params[i].aifns,
 152                           priv->edca.params[i].txop_limit,
 153                           priv->edca.params[i].max_rx_lifetime);
 154
 155        if (priv->join_status == CW1200_JOIN_STATUS_STA) {
 156                static const char *pm_mode = "unknown";
 157                switch (priv->powersave_mode.mode) {
 158                case WSM_PSM_ACTIVE:
 159                        pm_mode = "off";
 160                        break;
 161                case WSM_PSM_PS:
 162                        pm_mode = "on";
 163                        break;
 164                case WSM_PSM_FAST_PS:
 165                        pm_mode = "dynamic";
 166                        break;
 167                }
 168                seq_printf(seq, "Preamble:   %s\n",
 169                           cw1200_debug_preamble[priv->association_mode.preamble]);
 170                seq_printf(seq, "AMPDU spcn: %d\n",
 171                           priv->association_mode.mpdu_start_spacing);
 172                seq_printf(seq, "Basic rate: 0x%.8X\n",
 173                           le32_to_cpu(priv->association_mode.basic_rate_set));
 174                seq_printf(seq, "Bss lost:   %d beacons\n",
 175                           priv->bss_params.beacon_lost_count);
 176                seq_printf(seq, "AID:        %d\n",
 177                           priv->bss_params.aid);
 178                seq_printf(seq, "Rates:      0x%.8X\n",
 179                           priv->bss_params.operational_rate_set);
 180                seq_printf(seq, "Powersave:  %s\n", pm_mode);
 181        }
 182        seq_printf(seq, "HT:         %s\n",
 183                   cw1200_is_ht(&priv->ht_info) ? "on" : "off");
 184        if (cw1200_is_ht(&priv->ht_info)) {
 185                seq_printf(seq, "Greenfield: %s\n",
 186                           cw1200_ht_greenfield(&priv->ht_info) ? "yes" : "no");
 187                seq_printf(seq, "AMPDU dens: %d\n",
 188                           cw1200_ht_ampdu_density(&priv->ht_info));
 189        }
 190        seq_printf(seq, "RSSI thold: %d\n",
 191                   priv->cqm_rssi_thold);
 192        seq_printf(seq, "RSSI hyst:  %d\n",
 193                   priv->cqm_rssi_hyst);
 194        seq_printf(seq, "Long retr:  %d\n",
 195                   priv->long_frame_max_tx_count);
 196        seq_printf(seq, "Short retr: %d\n",
 197                   priv->short_frame_max_tx_count);
 198        spin_lock_bh(&priv->tx_policy_cache.lock);
 199        i = 0;
 200        list_for_each(item, &priv->tx_policy_cache.used)
 201                ++i;
 202        spin_unlock_bh(&priv->tx_policy_cache.lock);
 203        seq_printf(seq, "RC in use:  %d\n", i);
 204
 205        seq_puts(seq, "\n");
 206        for (i = 0; i < 4; ++i) {
 207                cw1200_queue_status_show(seq, &priv->tx_queue[i]);
 208                seq_puts(seq, "\n");
 209        }
 210
 211        cw1200_debug_print_map(seq, priv, "Link map:   ",
 212                               priv->link_id_map);
 213        cw1200_debug_print_map(seq, priv, "Asleep map: ",
 214                               priv->sta_asleep_mask);
 215        cw1200_debug_print_map(seq, priv, "PSPOLL map: ",
 216                               priv->pspoll_mask);
 217
 218        seq_puts(seq, "\n");
 219
 220        for (i = 0; i < CW1200_MAX_STA_IN_AP_MODE; ++i) {
 221                if (priv->link_id_db[i].status) {
 222                        seq_printf(seq, "Link %d:     %s, %pM\n",
 223                                   i + 1,
 224                                   cw1200_debug_link_id[priv->link_id_db[i].status],
 225                                   priv->link_id_db[i].mac);
 226                }
 227        }
 228
 229        seq_puts(seq, "\n");
 230
 231        seq_printf(seq, "BH status:  %s\n",
 232                   atomic_read(&priv->bh_term) ? "terminated" : "alive");
 233        seq_printf(seq, "Pending RX: %d\n",
 234                   atomic_read(&priv->bh_rx));
 235        seq_printf(seq, "Pending TX: %d\n",
 236                   atomic_read(&priv->bh_tx));
 237        if (priv->bh_error)
 238                seq_printf(seq, "BH errcode: %d\n",
 239                           priv->bh_error);
 240        seq_printf(seq, "TX bufs:    %d x %d bytes\n",
 241                   priv->wsm_caps.input_buffers,
 242                   priv->wsm_caps.input_buffer_size);
 243        seq_printf(seq, "Used bufs:  %d\n",
 244                   priv->hw_bufs_used);
 245        seq_printf(seq, "Powermgmt:  %s\n",
 246                   priv->powersave_enabled ? "on" : "off");
 247        seq_printf(seq, "Device:     %s\n",
 248                   priv->device_can_sleep ? "asleep" : "awake");
 249
 250        spin_lock(&priv->wsm_cmd.lock);
 251        seq_printf(seq, "WSM status: %s\n",
 252                   priv->wsm_cmd.done ? "idle" : "active");
 253        seq_printf(seq, "WSM cmd:    0x%.4X (%td bytes)\n",
 254                   priv->wsm_cmd.cmd, priv->wsm_cmd.len);
 255        seq_printf(seq, "WSM retval: %d\n",
 256                   priv->wsm_cmd.ret);
 257        spin_unlock(&priv->wsm_cmd.lock);
 258
 259        seq_printf(seq, "Datapath:   %s\n",
 260                   atomic_read(&priv->tx_lock) ? "locked" : "unlocked");
 261        if (atomic_read(&priv->tx_lock))
 262                seq_printf(seq, "TXlock cnt: %d\n",
 263                           atomic_read(&priv->tx_lock));
 264
 265        seq_printf(seq, "TXed:       %d\n",
 266                   d->tx);
 267        seq_printf(seq, "AGG TXed:   %d\n",
 268                   d->tx_agg);
 269        seq_printf(seq, "MULTI TXed: %d (%d)\n",
 270                   d->tx_multi, d->tx_multi_frames);
 271        seq_printf(seq, "RXed:       %d\n",
 272                   d->rx);
 273        seq_printf(seq, "AGG RXed:   %d\n",
 274                   d->rx_agg);
 275        seq_printf(seq, "TX miss:    %d\n",
 276                   d->tx_cache_miss);
 277        seq_printf(seq, "TX align:   %d\n",
 278                   d->tx_align);
 279        seq_printf(seq, "TX burst:   %d\n",
 280                   d->tx_burst);
 281        seq_printf(seq, "TX TTL:     %d\n",
 282                   d->tx_ttl);
 283        seq_printf(seq, "Scan:       %s\n",
 284                   atomic_read(&priv->scan.in_progress) ? "active" : "idle");
 285
 286        return 0;
 287}
 288
 289DEFINE_SHOW_ATTRIBUTE(cw1200_status);
 290
 291static int cw1200_counters_show(struct seq_file *seq, void *v)
 292{
 293        int ret;
 294        struct cw1200_common *priv = seq->private;
 295        struct wsm_mib_counters_table counters;
 296
 297        ret = wsm_get_counters_table(priv, &counters);
 298        if (ret)
 299                return ret;
 300
 301#define PUT_COUNTER(tab, name) \
 302        seq_printf(seq, "%s:" tab "%d\n", #name, \
 303                __le32_to_cpu(counters.name))
 304
 305        PUT_COUNTER("\t\t", plcp_errors);
 306        PUT_COUNTER("\t\t", fcs_errors);
 307        PUT_COUNTER("\t\t", tx_packets);
 308        PUT_COUNTER("\t\t", rx_packets);
 309        PUT_COUNTER("\t\t", rx_packet_errors);
 310        PUT_COUNTER("\t",   rx_decryption_failures);
 311        PUT_COUNTER("\t\t", rx_mic_failures);
 312        PUT_COUNTER("\t",   rx_no_key_failures);
 313        PUT_COUNTER("\t",   tx_multicast_frames);
 314        PUT_COUNTER("\t",   tx_frames_success);
 315        PUT_COUNTER("\t",   tx_frame_failures);
 316        PUT_COUNTER("\t",   tx_frames_retried);
 317        PUT_COUNTER("\t",   tx_frames_multi_retried);
 318        PUT_COUNTER("\t",   rx_frame_duplicates);
 319        PUT_COUNTER("\t\t", rts_success);
 320        PUT_COUNTER("\t\t", rts_failures);
 321        PUT_COUNTER("\t\t", ack_failures);
 322        PUT_COUNTER("\t",   rx_multicast_frames);
 323        PUT_COUNTER("\t",   rx_frames_success);
 324        PUT_COUNTER("\t",   rx_cmac_icv_errors);
 325        PUT_COUNTER("\t\t", rx_cmac_replays);
 326        PUT_COUNTER("\t",   rx_mgmt_ccmp_replays);
 327
 328#undef PUT_COUNTER
 329
 330        return 0;
 331}
 332
 333DEFINE_SHOW_ATTRIBUTE(cw1200_counters);
 334
 335static ssize_t cw1200_wsm_dumps(struct file *file,
 336        const char __user *user_buf, size_t count, loff_t *ppos)
 337{
 338        struct cw1200_common *priv = file->private_data;
 339        char buf[1];
 340
 341        if (!count)
 342                return -EINVAL;
 343        if (copy_from_user(buf, user_buf, 1))
 344                return -EFAULT;
 345
 346        if (buf[0] == '1')
 347                priv->wsm_enable_wsm_dumps = 1;
 348        else
 349                priv->wsm_enable_wsm_dumps = 0;
 350
 351        return count;
 352}
 353
 354static const struct file_operations fops_wsm_dumps = {
 355        .open = simple_open,
 356        .write = cw1200_wsm_dumps,
 357        .llseek = default_llseek,
 358};
 359
 360int cw1200_debug_init(struct cw1200_common *priv)
 361{
 362        int ret = -ENOMEM;
 363        struct cw1200_debug_priv *d = kzalloc(sizeof(struct cw1200_debug_priv),
 364                        GFP_KERNEL);
 365        priv->debug = d;
 366        if (!d)
 367                return ret;
 368
 369        d->debugfs_phy = debugfs_create_dir("cw1200",
 370                                            priv->hw->wiphy->debugfsdir);
 371        debugfs_create_file("status", 0400, d->debugfs_phy, priv,
 372                            &cw1200_status_fops);
 373        debugfs_create_file("counters", 0400, d->debugfs_phy, priv,
 374                            &cw1200_counters_fops);
 375        debugfs_create_file("wsm_dumps", 0200, d->debugfs_phy, priv,
 376                            &fops_wsm_dumps);
 377
 378        return 0;
 379}
 380
 381void cw1200_debug_release(struct cw1200_common *priv)
 382{
 383        struct cw1200_debug_priv *d = priv->debug;
 384        if (d) {
 385                debugfs_remove_recursive(d->debugfs_phy);
 386                priv->debug = NULL;
 387                kfree(d);
 388        }
 389}
 390