LXR linux/drivers/phy/broadcom/Kconfig

   1# SPDX-License-Identifier: GPL-2.0-only
   2#
   3# Phy drivers for Broadcom platforms
   4#
   5config PHY_BCM63XX_USBH
   6        tristate "BCM63xx USBH PHY driver"
   7        depends on BMIPS_GENERIC || COMPILE_TEST
   8        select GENERIC_PHY
   9        help
  10          Enable this to support the BCM63xx USBH PHY driver.
  11          If unsure, say N.
  12
  13config PHY_CYGNUS_PCIE
  14        tristate "Broadcom Cygnus PCIe PHY driver"
  15        depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
  16        select GENERIC_PHY
  17        default ARCH_BCM_CYGNUS
  18        help
  19          Enable this to support the Broadcom Cygnus PCIe PHY.
  20          If unsure, say N.
  21
  22config PHY_BCM_SR_USB
  23        tristate "Broadcom Stingray USB PHY driver"
  24        depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
  25        select GENERIC_PHY
  26        default ARCH_BCM_IPROC
  27        help
  28          Enable this to support the Broadcom Stingray USB PHY
  29          driver. It supports all versions of Superspeed and
  30          Highspeed PHYs.
  31          If unsure, say N.
  32
  33config BCM_KONA_USB2_PHY
  34        tristate "Broadcom Kona USB2 PHY Driver"
  35        depends on HAS_IOMEM
  36        select GENERIC_PHY
  37        help
  38          Enable this to support the Broadcom Kona USB 2.0 PHY.
  39
  40config PHY_BCM_NS_USB2
  41        tristate "Broadcom Northstar USB 2.0 PHY Driver"
  42        depends on ARCH_BCM_IPROC || COMPILE_TEST
  43        depends on HAS_IOMEM && OF
  44        select GENERIC_PHY
  45        help
  46          Enable this to support Broadcom USB 2.0 PHY connected to the USB
  47          controller on Northstar family.
  48
  49config PHY_BCM_NS_USB3
  50        tristate "Broadcom Northstar USB 3.0 PHY Driver"
  51        depends on ARCH_BCM_IPROC || COMPILE_TEST
  52        depends on HAS_IOMEM && OF
  53        depends on MDIO_BUS
  54        select GENERIC_PHY
  55        help
  56          Enable this to support Broadcom USB 3.0 PHY connected to the USB
  57          controller on Northstar family.
  58
  59config PHY_NS2_PCIE
  60        tristate "Broadcom Northstar2 PCIe PHY driver"
  61        depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS)
  62        select GENERIC_PHY
  63        default ARCH_BCM_IPROC
  64        help
  65          Enable this to support the Broadcom Northstar2 PCIe PHY.
  66          If unsure, say N.
  67
  68config PHY_NS2_USB_DRD
  69        tristate "Broadcom Northstar2 USB DRD PHY support"
  70        depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
  71        select GENERIC_PHY
  72        select EXTCON
  73        default ARCH_BCM_IPROC
  74        help
  75          Enable this to support the Broadcom Northstar2 USB DRD PHY.
  76          This driver initializes the PHY in either HOST or DEVICE mode.
  77          The host or device configuration is read from device tree.
  78
  79          If unsure, say N.
  80
  81config PHY_BRCM_SATA
  82        tristate "Broadcom SATA PHY driver"
  83        depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
  84                   ARCH_BCM_63XX || COMPILE_TEST
  85        depends on OF
  86        select GENERIC_PHY
  87        default ARCH_BCM_IPROC
  88        help
  89          Enable this to support the Broadcom SATA PHY.
  90          If unsure, say N.
  91
  92config PHY_BRCM_USB
  93        tristate "Broadcom STB USB PHY driver"
  94        depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
  95        depends on OF
  96        select GENERIC_PHY
  97        select SOC_BRCMSTB if ARCH_BRCMSTB
  98        default ARCH_BCM4908
  99        default ARCH_BRCMSTB
 100        help
 101          Enable this to support the Broadcom STB USB PHY.
 102          This driver is required by the USB XHCI, EHCI and OHCI
 103          drivers.
 104          If unsure, say N.
 105
 106config PHY_BCM_SR_PCIE
 107        tristate "Broadcom Stingray PCIe PHY driver"
 108        depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
 109        select GENERIC_PHY
 110        select MFD_SYSCON
 111        default ARCH_BCM_IPROC
 112        help
 113          Enable this to support the Broadcom Stingray PCIe PHY
 114          If unsure, say N.
 115