linux/drivers/phy/samsung/phy-samsung-usb2.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Samsung SoC USB 1.1/2.0 PHY driver
   4 *
   5 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
   6 * Author: Kamil Debski <k.debski@samsung.com>
   7 */
   8
   9#include <linux/clk.h>
  10#include <linux/mfd/syscon.h>
  11#include <linux/module.h>
  12#include <linux/of.h>
  13#include <linux/of_address.h>
  14#include <linux/of_device.h>
  15#include <linux/phy/phy.h>
  16#include <linux/platform_device.h>
  17#include <linux/spinlock.h>
  18#include "phy-samsung-usb2.h"
  19
  20static int samsung_usb2_phy_power_on(struct phy *phy)
  21{
  22        struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
  23        struct samsung_usb2_phy_driver *drv = inst->drv;
  24        int ret;
  25
  26        dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n",
  27                inst->cfg->label);
  28
  29        if (drv->vbus) {
  30                ret = regulator_enable(drv->vbus);
  31                if (ret)
  32                        goto err_regulator;
  33        }
  34
  35        ret = clk_prepare_enable(drv->clk);
  36        if (ret)
  37                goto err_main_clk;
  38        ret = clk_prepare_enable(drv->ref_clk);
  39        if (ret)
  40                goto err_instance_clk;
  41        if (inst->cfg->power_on) {
  42                spin_lock(&drv->lock);
  43                ret = inst->cfg->power_on(inst);
  44                spin_unlock(&drv->lock);
  45                if (ret)
  46                        goto err_power_on;
  47        }
  48
  49        return 0;
  50
  51err_power_on:
  52        clk_disable_unprepare(drv->ref_clk);
  53err_instance_clk:
  54        clk_disable_unprepare(drv->clk);
  55err_main_clk:
  56        if (drv->vbus)
  57                regulator_disable(drv->vbus);
  58err_regulator:
  59        return ret;
  60}
  61
  62static int samsung_usb2_phy_power_off(struct phy *phy)
  63{
  64        struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
  65        struct samsung_usb2_phy_driver *drv = inst->drv;
  66        int ret = 0;
  67
  68        dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n",
  69                inst->cfg->label);
  70        if (inst->cfg->power_off) {
  71                spin_lock(&drv->lock);
  72                ret = inst->cfg->power_off(inst);
  73                spin_unlock(&drv->lock);
  74                if (ret)
  75                        return ret;
  76        }
  77        clk_disable_unprepare(drv->ref_clk);
  78        clk_disable_unprepare(drv->clk);
  79        if (drv->vbus)
  80                ret = regulator_disable(drv->vbus);
  81
  82        return ret;
  83}
  84
  85static const struct phy_ops samsung_usb2_phy_ops = {
  86        .power_on       = samsung_usb2_phy_power_on,
  87        .power_off      = samsung_usb2_phy_power_off,
  88        .owner          = THIS_MODULE,
  89};
  90
  91static struct phy *samsung_usb2_phy_xlate(struct device *dev,
  92                                        struct of_phandle_args *args)
  93{
  94        struct samsung_usb2_phy_driver *drv;
  95
  96        drv = dev_get_drvdata(dev);
  97        if (!drv)
  98                return ERR_PTR(-EINVAL);
  99
 100        if (WARN_ON(args->args[0] >= drv->cfg->num_phys))
 101                return ERR_PTR(-ENODEV);
 102
 103        return drv->instances[args->args[0]].phy;
 104}
 105
 106static const struct of_device_id samsung_usb2_phy_of_match[] = {
 107#ifdef CONFIG_PHY_EXYNOS4X12_USB2
 108        {
 109                .compatible = "samsung,exynos3250-usb2-phy",
 110                .data = &exynos3250_usb2_phy_config,
 111        },
 112#endif
 113#ifdef CONFIG_PHY_EXYNOS4210_USB2
 114        {
 115                .compatible = "samsung,exynos4210-usb2-phy",
 116                .data = &exynos4210_usb2_phy_config,
 117        },
 118#endif
 119#ifdef CONFIG_PHY_EXYNOS4X12_USB2
 120        {
 121                .compatible = "samsung,exynos4x12-usb2-phy",
 122                .data = &exynos4x12_usb2_phy_config,
 123        },
 124#endif
 125#ifdef CONFIG_PHY_EXYNOS5250_USB2
 126        {
 127                .compatible = "samsung,exynos5250-usb2-phy",
 128                .data = &exynos5250_usb2_phy_config,
 129        },
 130        {
 131                .compatible = "samsung,exynos5420-usb2-phy",
 132                .data = &exynos5420_usb2_phy_config,
 133        },
 134#endif
 135#ifdef CONFIG_PHY_S5PV210_USB2
 136        {
 137                .compatible = "samsung,s5pv210-usb2-phy",
 138                .data = &s5pv210_usb2_phy_config,
 139        },
 140#endif
 141        { },
 142};
 143MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match);
 144
 145static int samsung_usb2_phy_probe(struct platform_device *pdev)
 146{
 147        const struct samsung_usb2_phy_config *cfg;
 148        struct device *dev = &pdev->dev;
 149        struct phy_provider *phy_provider;
 150        struct samsung_usb2_phy_driver *drv;
 151        int i, ret;
 152
 153        if (!pdev->dev.of_node) {
 154                dev_err(dev, "This driver is required to be instantiated from device tree\n");
 155                return -EINVAL;
 156        }
 157
 158        cfg = of_device_get_match_data(dev);
 159        if (!cfg)
 160                return -EINVAL;
 161
 162        drv = devm_kzalloc(dev, struct_size(drv, instances, cfg->num_phys),
 163                           GFP_KERNEL);
 164        if (!drv)
 165                return -ENOMEM;
 166
 167        dev_set_drvdata(dev, drv);
 168        spin_lock_init(&drv->lock);
 169
 170        drv->cfg = cfg;
 171        drv->dev = dev;
 172
 173        drv->reg_phy = devm_platform_ioremap_resource(pdev, 0);
 174        if (IS_ERR(drv->reg_phy)) {
 175                dev_err(dev, "Failed to map register memory (phy)\n");
 176                return PTR_ERR(drv->reg_phy);
 177        }
 178
 179        drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
 180                "samsung,pmureg-phandle");
 181        if (IS_ERR(drv->reg_pmu)) {
 182                dev_err(dev, "Failed to map PMU registers (via syscon)\n");
 183                return PTR_ERR(drv->reg_pmu);
 184        }
 185
 186        if (drv->cfg->has_mode_switch) {
 187                drv->reg_sys = syscon_regmap_lookup_by_phandle(
 188                                pdev->dev.of_node, "samsung,sysreg-phandle");
 189                if (IS_ERR(drv->reg_sys)) {
 190                        dev_err(dev, "Failed to map system registers (via syscon)\n");
 191                        return PTR_ERR(drv->reg_sys);
 192                }
 193        }
 194
 195        drv->clk = devm_clk_get(dev, "phy");
 196        if (IS_ERR(drv->clk)) {
 197                dev_err(dev, "Failed to get clock of phy controller\n");
 198                return PTR_ERR(drv->clk);
 199        }
 200
 201        drv->ref_clk = devm_clk_get(dev, "ref");
 202        if (IS_ERR(drv->ref_clk)) {
 203                dev_err(dev, "Failed to get reference clock for the phy controller\n");
 204                return PTR_ERR(drv->ref_clk);
 205        }
 206
 207        drv->ref_rate = clk_get_rate(drv->ref_clk);
 208        if (drv->cfg->rate_to_clk) {
 209                ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val);
 210                if (ret)
 211                        return ret;
 212        }
 213
 214        drv->vbus = devm_regulator_get(dev, "vbus");
 215        if (IS_ERR(drv->vbus)) {
 216                ret = PTR_ERR(drv->vbus);
 217                if (ret == -EPROBE_DEFER)
 218                        return ret;
 219                drv->vbus = NULL;
 220        }
 221
 222        for (i = 0; i < drv->cfg->num_phys; i++) {
 223                char *label = drv->cfg->phys[i].label;
 224                struct samsung_usb2_phy_instance *p = &drv->instances[i];
 225
 226                dev_dbg(dev, "Creating phy \"%s\"\n", label);
 227                p->phy = devm_phy_create(dev, NULL, &samsung_usb2_phy_ops);
 228                if (IS_ERR(p->phy)) {
 229                        dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n",
 230                                label);
 231                        return PTR_ERR(p->phy);
 232                }
 233
 234                p->cfg = &drv->cfg->phys[i];
 235                p->drv = drv;
 236                phy_set_bus_width(p->phy, 8);
 237                phy_set_drvdata(p->phy, p);
 238        }
 239
 240        phy_provider = devm_of_phy_provider_register(dev,
 241                                                        samsung_usb2_phy_xlate);
 242        if (IS_ERR(phy_provider)) {
 243                dev_err(drv->dev, "Failed to register phy provider\n");
 244                return PTR_ERR(phy_provider);
 245        }
 246
 247        return 0;
 248}
 249
 250static struct platform_driver samsung_usb2_phy_driver = {
 251        .probe  = samsung_usb2_phy_probe,
 252        .driver = {
 253                .of_match_table = samsung_usb2_phy_of_match,
 254                .name           = "samsung-usb2-phy",
 255                .suppress_bind_attrs = true,
 256        }
 257};
 258
 259module_platform_driver(samsung_usb2_phy_driver);
 260MODULE_DESCRIPTION("Samsung S5P/Exynos SoC USB PHY driver");
 261MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
 262MODULE_LICENSE("GPL v2");
 263MODULE_ALIAS("platform:samsung-usb2-phy");
 264