linux/drivers/scsi/isci/port.h
<<
>>
Prefs
   1/*
   2 * This file is provided under a dual BSD/GPLv2 license.  When using or
   3 * redistributing this file, you may do so under either license.
   4 *
   5 * GPL LICENSE SUMMARY
   6 *
   7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of version 2 of the GNU General Public License as
  11 * published by the Free Software Foundation.
  12 *
  13 * This program is distributed in the hope that it will be useful, but
  14 * WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16 * General Public License for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software
  20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  21 * The full GNU General Public License is included in this distribution
  22 * in the file called LICENSE.GPL.
  23 *
  24 * BSD LICENSE
  25 *
  26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
  27 * All rights reserved.
  28 *
  29 * Redistribution and use in source and binary forms, with or without
  30 * modification, are permitted provided that the following conditions
  31 * are met:
  32 *
  33 *   * Redistributions of source code must retain the above copyright
  34 *     notice, this list of conditions and the following disclaimer.
  35 *   * Redistributions in binary form must reproduce the above copyright
  36 *     notice, this list of conditions and the following disclaimer in
  37 *     the documentation and/or other materials provided with the
  38 *     distribution.
  39 *   * Neither the name of Intel Corporation nor the names of its
  40 *     contributors may be used to endorse or promote products derived
  41 *     from this software without specific prior written permission.
  42 *
  43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  54 */
  55
  56#ifndef _ISCI_PORT_H_
  57#define _ISCI_PORT_H_
  58
  59#include <scsi/libsas.h>
  60#include "isci.h"
  61#include "sas.h"
  62#include "phy.h"
  63
  64#define SCIC_SDS_DUMMY_PORT   0xFF
  65
  66#define PF_NOTIFY (1 << 0)
  67#define PF_RESUME (1 << 1)
  68
  69struct isci_phy;
  70struct isci_host;
  71
  72enum isci_status {
  73        isci_freed        = 0x00,
  74        isci_starting     = 0x01,
  75        isci_ready        = 0x02,
  76        isci_ready_for_io = 0x03,
  77        isci_stopping     = 0x04,
  78        isci_stopped      = 0x05,
  79};
  80
  81/**
  82 * struct isci_port - isci direct attached sas port object
  83 * @ready_exit: several states constitute 'ready'. When exiting ready we
  84 *              need to take extra port-teardown actions that are
  85 *              skipped when exiting to another 'ready' state.
  86 * @logical_port_index: software port index
  87 * @physical_port_index: hardware port index
  88 * @active_phy_mask: identifies phy members
  89 * @enabled_phy_mask: phy mask for the port
  90 *                    that are already part of the port
  91 * @reserved_tag:
  92 * @reserved_rni: reserver for port task scheduler workaround
  93 * @started_request_count: reference count for outstanding commands
  94 * @not_ready_reason: set during state transitions and notified
  95 * @timer: timeout start/stop operations
  96 */
  97struct isci_port {
  98        struct isci_host *isci_host;
  99        struct list_head remote_dev_list;
 100        #define IPORT_RESET_PENDING 0
 101        unsigned long state;
 102        enum sci_status hard_reset_status;
 103        struct sci_base_state_machine sm;
 104        bool ready_exit;
 105        u8 logical_port_index;
 106        u8 physical_port_index;
 107        u8 active_phy_mask;
 108        u8 enabled_phy_mask;
 109        u8 last_active_phy;
 110        u16 reserved_rni;
 111        u16 reserved_tag;
 112        u32 started_request_count;
 113        u32 assigned_device_count;
 114        u32 hang_detect_users;
 115        u32 not_ready_reason;
 116        struct isci_phy *phy_table[SCI_MAX_PHYS];
 117        struct isci_host *owning_controller;
 118        struct sci_timer timer;
 119        struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers;
 120        /* XXX rework: only one register, no need to replicate per-port */
 121        u32 __iomem *port_pe_configuration_register;
 122        struct scu_viit_entry __iomem *viit_registers;
 123};
 124
 125enum sci_port_not_ready_reason_code {
 126        SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS,
 127        SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED,
 128        SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION,
 129        SCIC_PORT_NOT_READY_RECONFIGURING,
 130
 131        SCIC_PORT_NOT_READY_REASON_CODE_MAX
 132};
 133
 134struct sci_port_end_point_properties {
 135        struct sci_sas_address sas_address;
 136        struct sci_phy_proto protocols;
 137};
 138
 139struct sci_port_properties {
 140        u32 index;
 141        struct sci_port_end_point_properties local;
 142        struct sci_port_end_point_properties remote;
 143        u32 phy_mask;
 144};
 145
 146/**
 147 * enum sci_port_states - port state machine states
 148 * @SCI_PORT_STOPPED: port has successfully been stopped.  In this state
 149 *                    no new IO operations are permitted.  This state is
 150 *                    entered from the STOPPING state.
 151 * @SCI_PORT_STOPPING: port is in the process of stopping.  In this
 152 *                     state no new IO operations are permitted, but
 153 *                     existing IO operations are allowed to complete.
 154 *                     This state is entered from the READY state.
 155 * @SCI_PORT_READY: port is now ready.  Thus, the user is able to
 156 *                  perform IO operations on this port. This state is
 157 *                  entered from the STARTING state.
 158 * @SCI_PORT_SUB_WAITING: port is started and ready but has no active
 159 *                        phys.
 160 * @SCI_PORT_SUB_OPERATIONAL: port is started and ready and there is at
 161 *                            least one phy operational.
 162 * @SCI_PORT_SUB_CONFIGURING: port is started and there was an
 163 *                            add/remove phy event.  This state is only
 164 *                            used in Automatic Port Configuration Mode
 165 *                            (APC)
 166 * @SCI_PORT_RESETTING: port is in the process of performing a hard
 167 *                      reset.  Thus, the user is unable to perform IO
 168 *                      operations on this port.  This state is entered
 169 *                      from the READY state.
 170 * @SCI_PORT_FAILED: port has failed a reset request.  This state is
 171 *                   entered when a port reset request times out. This
 172 *                   state is entered from the RESETTING state.
 173 */
 174#define PORT_STATES {\
 175        C(PORT_STOPPED),\
 176        C(PORT_STOPPING),\
 177        C(PORT_READY),\
 178        C(PORT_SUB_WAITING),\
 179        C(PORT_SUB_OPERATIONAL),\
 180        C(PORT_SUB_CONFIGURING),\
 181        C(PORT_RESETTING),\
 182        C(PORT_FAILED),\
 183        }
 184#undef C
 185#define C(a) SCI_##a
 186enum sci_port_states PORT_STATES;
 187#undef C
 188
 189static inline void sci_port_decrement_request_count(struct isci_port *iport)
 190{
 191        if (WARN_ONCE(iport->started_request_count == 0,
 192                       "%s: tried to decrement started_request_count past 0!?",
 193                        __func__))
 194                /* pass */;
 195        else
 196                iport->started_request_count--;
 197}
 198
 199#define sci_port_active_phy(port, phy) \
 200        (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0)
 201
 202void sci_port_construct(
 203        struct isci_port *iport,
 204        u8 port_index,
 205        struct isci_host *ihost);
 206
 207enum sci_status sci_port_start(struct isci_port *iport);
 208enum sci_status sci_port_stop(struct isci_port *iport);
 209
 210enum sci_status sci_port_add_phy(
 211        struct isci_port *iport,
 212        struct isci_phy *iphy);
 213
 214enum sci_status sci_port_remove_phy(
 215        struct isci_port *iport,
 216        struct isci_phy *iphy);
 217
 218void sci_port_setup_transports(
 219        struct isci_port *iport,
 220        u32 device_id);
 221
 222void isci_port_bcn_enable(struct isci_host *, struct isci_port *);
 223
 224void sci_port_deactivate_phy(
 225        struct isci_port *iport,
 226        struct isci_phy *iphy,
 227        bool do_notify_user);
 228
 229bool sci_port_link_detected(
 230        struct isci_port *iport,
 231        struct isci_phy *iphy);
 232
 233enum sci_status sci_port_get_properties(
 234        struct isci_port *iport,
 235        struct sci_port_properties *prop);
 236
 237enum sci_status sci_port_link_up(struct isci_port *iport,
 238                                      struct isci_phy *iphy);
 239enum sci_status sci_port_link_down(struct isci_port *iport,
 240                                        struct isci_phy *iphy);
 241
 242struct isci_request;
 243struct isci_remote_device;
 244enum sci_status sci_port_start_io(
 245        struct isci_port *iport,
 246        struct isci_remote_device *idev,
 247        struct isci_request *ireq);
 248
 249enum sci_status sci_port_complete_io(
 250        struct isci_port *iport,
 251        struct isci_remote_device *idev,
 252        struct isci_request *ireq);
 253
 254enum sas_linkrate sci_port_get_max_allowed_speed(
 255        struct isci_port *iport);
 256
 257void sci_port_broadcast_change_received(
 258        struct isci_port *iport,
 259        struct isci_phy *iphy);
 260
 261bool sci_port_is_valid_phy_assignment(
 262        struct isci_port *iport,
 263        u32 phy_index);
 264
 265void sci_port_get_sas_address(
 266        struct isci_port *iport,
 267        struct sci_sas_address *sas_address);
 268
 269void sci_port_get_attached_sas_address(
 270        struct isci_port *iport,
 271        struct sci_sas_address *sas_address);
 272
 273void sci_port_set_hang_detection_timeout(
 274        struct isci_port *isci_port,
 275        u32 timeout);
 276
 277void isci_port_formed(struct asd_sas_phy *);
 278void isci_port_deformed(struct asd_sas_phy *);
 279
 280int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
 281                                 struct isci_phy *iphy);
 282int isci_ata_check_ready(struct domain_device *dev);
 283#endif /* !defined(_ISCI_PORT_H_) */
 284