// SPDX-License-Identifier: GPL-2.0-only
/*
 * QLogic Fibre Channel HBA Driver
 * Copyright (c)  2003-2014 QLogic Corporation
 */
#include "qla_def.h"

#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/kobject.h>
#include <linux/slab.h>
#include <linux/blk-mq-pci.h>
#include <linux/refcount.h>
#include <linux/crash_dump.h>

#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_fc.h>

#include "qla_target.h"

/*
 * Driver version
 */
char qla2x00_version_str[40];

static int apidev_major;

/*
 * SRB allocation cache
 */
struct kmem_cache *srb_cachep;

int ql2xfulldump_on_mpifail;
module_param(ql2xfulldump_on_mpifail, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ql2xfulldump_on_mpifail,
                 "Set this to take full dump on MPI hang.");

int ql2xenforce_iocb_limit = 1;
module_param(ql2xenforce_iocb_limit, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ql2xenforce_iocb_limit,
                 "Enforce IOCB throttling, to avoid FW congestion. (default: 1)");

/*
 * CT6 CTX allocation cache
 */
static struct kmem_cache *ctx_cachep;
/*
 * error level for logging
 */
uint ql_errlev = 0x8001;

int ql2xsecenable;
module_param(ql2xsecenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xsecenable,
        "Enable/disable security. 0(Default) - Security disabled. 1 - Security enabled.");

static int ql2xenableclass2;
module_param(ql2xenableclass2, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xenableclass2,
                "Specify if Class 2 operations are supported from the very "
                "beginning. Default is 0 - class 2 not supported.");


int ql2xlogintimeout = 20;
module_param(ql2xlogintimeout, int, S_IRUGO);
MODULE_PARM_DESC(ql2xlogintimeout,
                "Login timeout value in seconds.");

int qlport_down_retry;
module_param(qlport_down_retry, int, S_IRUGO);
MODULE_PARM_DESC(qlport_down_retry,
                "Maximum number of command retries to a port that returns "
                "a PORT-DOWN status.");

int ql2xplogiabsentdevice;
module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xplogiabsentdevice,
                "Option to enable PLOGI to devices that are not present after "
                "a Fabric scan.  This is needed for several broken switches. "
                "Default is 0 - no PLOGI. 1 - perform PLOGI.");

int ql2xloginretrycount;
module_param(ql2xloginretrycount, int, S_IRUGO);
MODULE_PARM_DESC(ql2xloginretrycount,
                "Specify an alternate value for the NVRAM login retry count.");

int ql2xallocfwdump = 1;
module_param(ql2xallocfwdump, int, S_IRUGO);
MODULE_PARM_DESC(ql2xallocfwdump,
                "Option to enable allocation of memory for a firmware dump "
                "during HBA initialization.  Memory allocation requirements "
                "vary by ISP type.  Default is 1 - allocate memory.");

int ql2xextended_error_logging;
module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
module_param_named(logging, ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xextended_error_logging,
                "Option to enable extended error logging,\n"
                "\t\tDefault is 0 - no logging.  0x40000000 - Module Init & Probe.\n"
                "\t\t0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.\n"
                "\t\t0x08000000 - IO tracing.    0x04000000 - DPC Thread.\n"
                "\t\t0x02000000 - Async events.  0x01000000 - Timer routines.\n"
                "\t\t0x00800000 - User space.    0x00400000 - Task Management.\n"
                "\t\t0x00200000 - AER/EEH.       0x00100000 - Multi Q.\n"
                "\t\t0x00080000 - P3P Specific.  0x00040000 - Virtual Port.\n"
                "\t\t0x00020000 - Buffer Dump.   0x00010000 - Misc.\n"
                "\t\t0x00008000 - Verbose.       0x00004000 - Target.\n"
                "\t\t0x00002000 - Target Mgmt.   0x00001000 - Target TMF.\n"
                "\t\t0x7fffffff - For enabling all logs, can be too many logs.\n"
                "\t\t0x1e400000 - Preferred value for capturing essential "
                "debug information (equivalent to old "
                "ql2xextended_error_logging=1).\n"
                "\t\tDo LOGICAL OR of the value to enable more than one level");

int ql2xshiftctondsd = 6;
module_param(ql2xshiftctondsd, int, S_IRUGO);
MODULE_PARM_DESC(ql2xshiftctondsd,
                "Set to control shifting of command type processing "
                "based on total number of SG elements.");

int ql2xfdmienable = 1;
module_param(ql2xfdmienable, int, S_IRUGO|S_IWUSR);
module_param_named(fdmi, ql2xfdmienable, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xfdmienable,
                "Enables FDMI registrations. "
                "0 - no FDMI registrations. "
                "1 - provide FDMI registrations (default).");

#define MAX_Q_DEPTH     64
static int ql2xmaxqdepth = MAX_Q_DEPTH;
module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xmaxqdepth,
                "Maximum queue depth to set for each LUN. "
                "Default is 64.");

int ql2xenabledif = 2;
module_param(ql2xenabledif, int, S_IRUGO);
MODULE_PARM_DESC(ql2xenabledif,
                " Enable T10-CRC-DIF:\n"
                " Default is 2.\n"
                "  0 -- No DIF Support\n"
                "  1 -- Enable DIF for all types\n"
                "  2 -- Enable DIF for all types, except Type 0.\n");

#if (IS_ENABLED(CONFIG_NVME_FC))
int ql2xnvmeenable = 1;
#else
int ql2xnvmeenable;
#endif
module_param(ql2xnvmeenable, int, 0644);
MODULE_PARM_DESC(ql2xnvmeenable,
    "Enables NVME support. "
    "0 - no NVMe.  Default is Y");

int ql2xenablehba_err_chk = 2;
module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xenablehba_err_chk,
                " Enable T10-CRC-DIF Error isolation by HBA:\n"
                " Default is 2.\n"
                "  0 -- Error isolation disabled\n"
                "  1 -- Error isolation enabled only for DIX Type 0\n"
                "  2 -- Error isolation enabled for all Types\n");

int ql2xiidmaenable = 1;
module_param(ql2xiidmaenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xiidmaenable,
                "Enables iIDMA settings "
                "Default is 1 - perform iIDMA. 0 - no iIDMA.");

int ql2xmqsupport = 1;
module_param(ql2xmqsupport, int, S_IRUGO);
MODULE_PARM_DESC(ql2xmqsupport,
                "Enable on demand multiple queue pairs support "
                "Default is 1 for supported. "
                "Set it to 0 to turn off mq qpair support.");

int ql2xfwloadbin;
module_param(ql2xfwloadbin, int, S_IRUGO|S_IWUSR);
module_param_named(fwload, ql2xfwloadbin, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xfwloadbin,
                "Option to specify location from which to load ISP firmware:.\n"
                " 2 -- load firmware via the request_firmware() (hotplug).\n"
                "      interface.\n"
                " 1 -- load firmware from flash.\n"
                " 0 -- use default semantics.\n");

int ql2xetsenable;
module_param(ql2xetsenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xetsenable,
                "Enables firmware ETS burst."
                "Default is 0 - skip ETS enablement.");

int ql2xdbwr = 1;
module_param(ql2xdbwr, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xdbwr,
                "Option to specify scheme for request queue posting.\n"
                " 0 -- Regular doorbell.\n"
                " 1 -- CAMRAM doorbell (faster).\n");

int ql2xtargetreset = 1;
module_param(ql2xtargetreset, int, S_IRUGO);
MODULE_PARM_DESC(ql2xtargetreset,
                 "Enable target reset."
                 "Default is 1 - use hw defaults.");

int ql2xgffidenable;
module_param(ql2xgffidenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xgffidenable,
                "Enables GFF_ID checks of port type. "
                "Default is 0 - Do not use GFF_ID information.");

int ql2xasynctmfenable = 1;
module_param(ql2xasynctmfenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xasynctmfenable,
                "Enables issue of TM IOCBs asynchronously via IOCB mechanism"
                "Default is 1 - Issue TM IOCBs via mailbox mechanism.");

int ql2xdontresethba;
module_param(ql2xdontresethba, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xdontresethba,
                "Option to specify reset behaviour.\n"
                " 0 (Default) -- Reset on failure.\n"
                " 1 -- Do not reset on failure.\n");

uint64_t ql2xmaxlun = MAX_LUNS;
module_param(ql2xmaxlun, ullong, S_IRUGO);
MODULE_PARM_DESC(ql2xmaxlun,
                "Defines the maximum LU number to register with the SCSI "
                "midlayer. Default is 65535.");

int ql2xmdcapmask = 0x1F;
module_param(ql2xmdcapmask, int, S_IRUGO);
MODULE_PARM_DESC(ql2xmdcapmask,
                "Set the Minidump driver capture mask level. "
                "Default is 0x1F - Can be set to 0x3, 0x7, 0xF, 0x1F, 0x7F.");

int ql2xmdenable = 1;
module_param(ql2xmdenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xmdenable,
                "Enable/disable MiniDump. "
                "0 - MiniDump disabled. "
                "1 (Default) - MiniDump enabled.");

int ql2xexlogins;
module_param(ql2xexlogins, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xexlogins,
                 "Number of extended Logins. "
                 "0 (Default)- Disabled.");

int ql2xexchoffld = 1024;
module_param(ql2xexchoffld, uint, 0644);
MODULE_PARM_DESC(ql2xexchoffld,
        "Number of target exchanges.");

int ql2xiniexchg = 1024;
module_param(ql2xiniexchg, uint, 0644);
MODULE_PARM_DESC(ql2xiniexchg,
        "Number of initiator exchanges.");

int ql2xfwholdabts;
module_param(ql2xfwholdabts, int, S_IRUGO);
MODULE_PARM_DESC(ql2xfwholdabts,
                "Allow FW to hold status IOCB until ABTS rsp received. "
                "0 (Default) Do not set fw option. "
                "1 - Set fw option to hold ABTS.");

int ql2xmvasynctoatio = 1;
module_param(ql2xmvasynctoatio, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xmvasynctoatio,
                "Move PUREX, ABTS RX and RIDA IOCBs to ATIOQ"
                "0 (Default). Do not move IOCBs"
                "1 - Move IOCBs.");

int ql2xautodetectsfp = 1;
module_param(ql2xautodetectsfp, int, 0444);
MODULE_PARM_DESC(ql2xautodetectsfp,
                 "Detect SFP range and set appropriate distance.\n"
                 "1 (Default): Enable\n");

int ql2xenablemsix = 1;
module_param(ql2xenablemsix, int, 0444);
MODULE_PARM_DESC(ql2xenablemsix,
                 "Set to enable MSI or MSI-X interrupt mechanism.\n"
                 " Default is 1, enable MSI-X interrupt mechanism.\n"
                 " 0 -- enable traditional pin-based mechanism.\n"
                 " 1 -- enable MSI-X interrupt mechanism.\n"
                 " 2 -- enable MSI interrupt mechanism.\n");

int qla2xuseresexchforels;
module_param(qla2xuseresexchforels, int, 0444);
MODULE_PARM_DESC(qla2xuseresexchforels,
                 "Reserve 1/2 of emergency exchanges for ELS.\n"
                 " 0 (default): disabled");

static int ql2xprotmask;
module_param(ql2xprotmask, int, 0644);
MODULE_PARM_DESC(ql2xprotmask,
                 "Override DIF/DIX protection capabilities mask\n"
                 "Default is 0 which sets protection mask based on "
                 "capabilities reported by HBA firmware.\n");

static int ql2xprotguard;
module_param(ql2xprotguard, int, 0644);
MODULE_PARM_DESC(ql2xprotguard, "Override choice of DIX checksum\n"
                 "  0 -- Let HBA firmware decide\n"
                 "  1 -- Force T10 CRC\n"
                 "  2 -- Force IP checksum\n");

int ql2xdifbundlinginternalbuffers;
module_param(ql2xdifbundlinginternalbuffers, int, 0644);
MODULE_PARM_DESC(ql2xdifbundlinginternalbuffers,
    "Force using internal buffers for DIF information\n"
    "0 (Default). Based on check.\n"
    "1 Force using internal buffers\n");

int ql2xsmartsan;
module_param(ql2xsmartsan, int, 0444);
module_param_named(smartsan, ql2xsmartsan, int, 0444);
MODULE_PARM_DESC(ql2xsmartsan,
                "Send SmartSAN Management Attributes for FDMI Registration."
                " Default is 0 - No SmartSAN registration,"
                " 1 - Register SmartSAN Management Attributes.");

int ql2xrdpenable;
module_param(ql2xrdpenable, int, 0444);
module_param_named(rdpenable, ql2xrdpenable, int, 0444);
MODULE_PARM_DESC(ql2xrdpenable,
                "Enables RDP responses. "
                "0 - no RDP responses (default). "
                "1 - provide RDP responses.");
int ql2xabts_wait_nvme = 1;
module_param(ql2xabts_wait_nvme, int, 0444);
MODULE_PARM_DESC(ql2xabts_wait_nvme,
                 "To wait for ABTS response on I/O timeouts for NVMe. (default: 1)");


static void qla2x00_clear_drv_active(struct qla_hw_data *);
static void qla2x00_free_device(scsi_qla_host_t *);
static int qla2xxx_map_queues(struct Scsi_Host *shost);
static void qla2x00_destroy_deferred_work(struct qla_hw_data *);


static struct scsi_transport_template *qla2xxx_transport_template = NULL;
struct scsi_transport_template *qla2xxx_transport_vport_template = NULL;

/* TODO Convert to inlines
 *
 * Timer routines
 */

__inline__ void
qla2x00_start_timer(scsi_qla_host_t *vha, unsigned long interval)
{
        timer_setup(&vha->timer, qla2x00_timer, 0);
        vha->timer.expires = jiffies + interval * HZ;
        add_timer(&vha->timer);
        vha->timer_active = 1;
}

static inline void
qla2x00_restart_timer(scsi_qla_host_t *vha, unsigned long interval)
{
        /* Currently used for 82XX only. */
        if (vha->device_flags & DFLG_DEV_FAILED) {
                ql_dbg(ql_dbg_timer, vha, 0x600d,
                    "Device in a failed state, returning.\n");
                return;
        }

        mod_timer(&vha->timer, jiffies + interval * HZ);
}

static __inline__ void
qla2x00_stop_timer(scsi_qla_host_t *vha)
{
        del_timer_sync(&vha->timer);
        vha->timer_active = 0;
}

static int qla2x00_do_dpc(void *data);

static void qla2x00_rst_aen(scsi_qla_host_t *);

static int qla2x00_mem_alloc(struct qla_hw_data *, uint16_t, uint16_t,
        struct req_que **, struct rsp_que **);
static void qla2x00_free_fw_dump(struct qla_hw_data *);
static void qla2x00_mem_free(struct qla_hw_data *);
int qla2xxx_mqueuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd,
        struct qla_qpair *qpair);

/* -------------------------------------------------------------------------- */
static void qla_init_base_qpair(struct scsi_qla_host *vha, struct req_que *req,
    struct rsp_que *rsp)
{
        struct qla_hw_data *ha = vha->hw;

        rsp->qpair = ha->base_qpair;
        rsp->req = req;
        ha->base_qpair->hw = ha;
        ha->base_qpair->req = req;
        ha->base_qpair->rsp = rsp;
        ha->base_qpair->vha = vha;
        ha->base_qpair->qp_lock_ptr = &ha->hardware_lock;
        ha->base_qpair->use_shadow_reg = IS_SHADOW_REG_CAPABLE(ha) ? 1 : 0;
        ha->base_qpair->msix = &ha->msix_entries[QLA_MSIX_RSP_Q];
        ha->base_qpair->srb_mempool = ha->srb_mempool;
        INIT_LIST_HEAD(&ha->base_qpair->hints_list);
        ha->base_qpair->enable_class_2 = ql2xenableclass2;
        /* init qpair to this cpu. Will adjust at run time. */
        qla_cpu_update(rsp->qpair, raw_smp_processor_id());
        ha->base_qpair->pdev = ha->pdev;

        if (IS_QLA27XX(ha) || IS_QLA83XX(ha) || IS_QLA28XX(ha))
                ha->base_qpair->reqq_start_iocbs = qla_83xx_start_iocbs;
}

static int qla2x00_alloc_queues(struct qla_hw_data *ha, struct req_que *req,
                                struct rsp_que *rsp)
{
        scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);

        ha->req_q_map = kcalloc(ha->max_req_queues, sizeof(struct req_que *),
                                GFP_KERNEL);
        if (!ha->req_q_map) {
                ql_log(ql_log_fatal, vha, 0x003b,
                    "Unable to allocate memory for request queue ptrs.\n");
                goto fail_req_map;
        }

        ha->rsp_q_map = kcalloc(ha->max_rsp_queues, sizeof(struct rsp_que *),
                                GFP_KERNEL);
        if (!ha->rsp_q_map) {
                ql_log(ql_log_fatal, vha, 0x003c,
                    "Unable to allocate memory for response queue ptrs.\n");
                goto fail_rsp_map;
        }

        ha->base_qpair = kzalloc(sizeof(struct qla_qpair), GFP_KERNEL);
        if (ha->base_qpair == NULL) {
                ql_log(ql_log_warn, vha, 0x00e0,
                    "Failed to allocate base queue pair memory.\n");
                goto fail_base_qpair;
        }

        qla_init_base_qpair(vha, req, rsp);

        if ((ql2xmqsupport || ql2xnvmeenable) && ha->max_qpairs) {
                ha->queue_pair_map = kcalloc(ha->max_qpairs, sizeof(struct qla_qpair *),
                        GFP_KERNEL);
                if (!ha->queue_pair_map) {
                        ql_log(ql_log_fatal, vha, 0x0180,
                            "Unable to allocate memory for queue pair ptrs.\n");
                        goto fail_qpair_map;
                }
        }

        /*
         * Make sure we record at least the request and response queue zero in
         * case we need to free them if part of the probe fails.
         */
        ha->rsp_q_map[0] = rsp;
        ha->req_q_map[0] = req;
        set_bit(0, ha->rsp_qid_map);
        set_bit(0, ha->req_qid_map);
        return 0;

fail_qpair_map:
        kfree(ha->base_qpair);
        ha->base_qpair = NULL;
fail_base_qpair:
        kfree(ha->rsp_q_map);
        ha->rsp_q_map = NULL;
fail_rsp_map:
        kfree(ha->req_q_map);
        ha->req_q_map = NULL;
fail_req_map:
        return -ENOMEM;
}

static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req)
{
        if (IS_QLAFX00(ha)) {
                if (req && req->ring_fx00)
                        dma_free_coherent(&ha->pdev->dev,
                            (req->length_fx00 + 1) * sizeof(request_t),
                            req->ring_fx00, req->dma_fx00);
        } else if (req && req->ring)
                dma_free_coherent(&ha->pdev->dev,
                (req->length + 1) * sizeof(request_t),
                req->ring, req->dma);

        if (req)
                kfree(req->outstanding_cmds);

        kfree(req);
}

static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp)
{
        if (IS_QLAFX00(ha)) {
                if (rsp && rsp->ring_fx00)
                        dma_free_coherent(&ha->pdev->dev,
                            (rsp->length_fx00 + 1) * sizeof(request_t),
                            rsp->ring_fx00, rsp->dma_fx00);
        } else if (rsp && rsp->ring) {
                dma_free_coherent(&ha->pdev->dev,
                (rsp->length + 1) * sizeof(response_t),
                rsp->ring, rsp->dma);
        }
        kfree(rsp);
}

static void qla2x00_free_queues(struct qla_hw_data *ha)
{
        struct req_que *req;
        struct rsp_que *rsp;
        int cnt;
        unsigned long flags;

        if (ha->queue_pair_map) {
                kfree(ha->queue_pair_map);
                ha->queue_pair_map = NULL;
        }
        if (ha->base_qpair) {
                kfree(ha->base_qpair);
                ha->base_qpair = NULL;
        }

        spin_lock_irqsave(&ha->hardware_lock, flags);
        for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
                if (!test_bit(cnt, ha->req_qid_map))
                        continue;

                req = ha->req_q_map[cnt];
                clear_bit(cnt, ha->req_qid_map);
                ha->req_q_map[cnt] = NULL;

                spin_unlock_irqrestore(&ha->hardware_lock, flags);
                qla2x00_free_req_que(ha, req);
                spin_lock_irqsave(&ha->hardware_lock, flags);
        }
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        kfree(ha->req_q_map);
        ha->req_q_map = NULL;


        spin_lock_irqsave(&ha->hardware_lock, flags);
        for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) {
                if (!test_bit(cnt, ha->rsp_qid_map))
                        continue;

                rsp = ha->rsp_q_map[cnt];
                clear_bit(cnt, ha->rsp_qid_map);
                ha->rsp_q_map[cnt] =  NULL;
                spin_unlock_irqrestore(&ha->hardware_lock, flags);
                qla2x00_free_rsp_que(ha, rsp);
                spin_lock_irqsave(&ha->hardware_lock, flags);
        }
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        kfree(ha->rsp_q_map);
        ha->rsp_q_map = NULL;
}

static char *
qla2x00_pci_info_str(struct scsi_qla_host *vha, char *str, size_t str_len)
{
        struct qla_hw_data *ha = vha->hw;
        static const char *const pci_bus_modes[] = {
                "33", "66", "100", "133",
        };
        uint16_t pci_bus;

        pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
        if (pci_bus) {
                snprintf(str, str_len, "PCI-X (%s MHz)",
                         pci_bus_modes[pci_bus]);
        } else {
                pci_bus = (ha->pci_attr & BIT_8) >> 8;
                snprintf(str, str_len, "PCI (%s MHz)", pci_bus_modes[pci_bus]);
        }

        return str;
}

static char *
qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str, size_t str_len)
{
        static const char *const pci_bus_modes[] = {
                "33", "66", "100", "133",
        };
        struct qla_hw_data *ha = vha->hw;
        uint32_t pci_bus;

        if (pci_is_pcie(ha->pdev)) {
                uint32_t lstat, lspeed, lwidth;
                const char *speed_str;

                pcie_capability_read_dword(ha->pdev, PCI_EXP_LNKCAP, &lstat);
                lspeed = lstat & PCI_EXP_LNKCAP_SLS;
                lwidth = (lstat & PCI_EXP_LNKCAP_MLW) >> 4;

                switch (lspeed) {
                case 1:
                        speed_str = "2.5GT/s";
                        break;
                case 2:
                        speed_str = "5.0GT/s";
                        break;
                case 3:
                        speed_str = "8.0GT/s";
                        break;
                case 4:
                        speed_str = "16.0GT/s";
                        break;
                default:
                        speed_str = "<unknown>";
                        break;
                }
                snprintf(str, str_len, "PCIe (%s x%d)", speed_str, lwidth);

                return str;
        }

        pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
        if (pci_bus == 0 || pci_bus == 8)
                snprintf(str, str_len, "PCI (%s MHz)",
                         pci_bus_modes[pci_bus >> 3]);
        else
                snprintf(str, str_len, "PCI-X Mode %d (%s MHz)",
                         pci_bus & 4 ? 2 : 1,
                         pci_bus_modes[pci_bus & 3]);

        return str;
}

static char *
qla2x00_fw_version_str(struct scsi_qla_host *vha, char *str, size_t size)
{
        char un_str[10];
        struct qla_hw_data *ha = vha->hw;

        snprintf(str, size, "%d.%02d.%02d ", ha->fw_major_version,
            ha->fw_minor_version, ha->fw_subminor_version);

        if (ha->fw_attributes & BIT_9) {
                strcat(str, "FLX");
                return (str);
        }

        switch (ha->fw_attributes & 0xFF) {
        case 0x7:
                strcat(str, "EF");
                break;
        case 0x17:
                strcat(str, "TP");
                break;
        case 0x37:
                strcat(str, "IP");
                break;
        case 0x77:
                strcat(str, "VI");
                break;
        default:
                sprintf(un_str, "(%x)", ha->fw_attributes);
                strcat(str, un_str);
                break;
        }
        if (ha->fw_attributes & 0x100)
                strcat(str, "X");

        return (str);
}

static char *
qla24xx_fw_version_str(struct scsi_qla_host *vha, char *str, size_t size)
{
        struct qla_hw_data *ha = vha->hw;

        snprintf(str, size, "%d.%02d.%02d (%x)", ha->fw_major_version,
            ha->fw_minor_version, ha->fw_subminor_version, ha->fw_attributes);
        return str;
}

void qla2x00_sp_free_dma(srb_t *sp)
{
        struct qla_hw_data *ha = sp->vha->hw;
        struct scsi_cmnd *cmd = GET_CMD_SP(sp);

        if (sp->flags & SRB_DMA_VALID) {
                scsi_dma_unmap(cmd);
                sp->flags &= ~SRB_DMA_VALID;
        }

        if (sp->flags & SRB_CRC_PROT_DMA_VALID) {
                dma_unmap_sg(&ha->pdev->dev, scsi_prot_sglist(cmd),
                    scsi_prot_sg_count(cmd), cmd->sc_data_direction);
                sp->flags &= ~SRB_CRC_PROT_DMA_VALID;
        }

        if (sp->flags & SRB_CRC_CTX_DSD_VALID) {
                /* List assured to be having elements */
                qla2x00_clean_dsd_pool(ha, sp->u.scmd.crc_ctx);
                sp->flags &= ~SRB_CRC_CTX_DSD_VALID;
        }

        if (sp->flags & SRB_CRC_CTX_DMA_VALID) {
                struct crc_context *ctx0 = sp->u.scmd.crc_ctx;

                dma_pool_free(ha->dl_dma_pool, ctx0, ctx0->crc_ctx_dma);
                sp->flags &= ~SRB_CRC_CTX_DMA_VALID;
        }

        if (sp->flags & SRB_FCP_CMND_DMA_VALID) {
                struct ct6_dsd *ctx1 = sp->u.scmd.ct6_ctx;

                dma_pool_free(ha->fcp_cmnd_dma_pool, ctx1->fcp_cmnd,
                    ctx1->fcp_cmnd_dma);
                list_splice(&ctx1->dsd_list, &ha->gbl_dsd_list);
                ha->gbl_dsd_inuse -= ctx1->dsd_use_cnt;
                ha->gbl_dsd_avail += ctx1->dsd_use_cnt;
                mempool_free(ctx1, ha->ctx_mempool);
        }
}

void qla2x00_sp_compl(srb_t *sp, int res)
{
        struct scsi_cmnd *cmd = GET_CMD_SP(sp);
        struct completion *comp = sp->comp;

        sp->free(sp);
        cmd->result = res;
        CMD_SP(cmd) = NULL;
        cmd->scsi_done(cmd);
        if (comp)
                complete(comp);
}

void qla2xxx_qpair_sp_free_dma(srb_t *sp)
{
        struct scsi_cmnd *cmd = GET_CMD_SP(sp);
        struct qla_hw_data *ha = sp->fcport->vha->hw;

        if (sp->flags & SRB_DMA_VALID) {
                scsi_dma_unmap(cmd);
                sp->flags &= ~SRB_DMA_VALID;
        }

        if (sp->flags & SRB_CRC_PROT_DMA_VALID) {
                dma_unmap_sg(&ha->pdev->dev, scsi_prot_sglist(cmd),
                    scsi_prot_sg_count(cmd), cmd->sc_data_direction);
                sp->flags &= ~SRB_CRC_PROT_DMA_VALID;
        }

        if (sp->flags & SRB_CRC_CTX_DSD_VALID) {
                /* List assured to be having elements */
                qla2x00_clean_dsd_pool(ha, sp->u.scmd.crc_ctx);
                sp->flags &= ~SRB_CRC_CTX_DSD_VALID;
        }

        if (sp->flags & SRB_DIF_BUNDL_DMA_VALID) {
                struct crc_context *difctx = sp->u.scmd.crc_ctx;
                struct dsd_dma *dif_dsd, *nxt_dsd;

                list_for_each_entry_safe(dif_dsd, nxt_dsd,
                    &difctx->ldif_dma_hndl_list, list) {
                        list_del(&dif_dsd->list);
                        dma_pool_free(ha->dif_bundl_pool, dif_dsd->dsd_addr,
                            dif_dsd->dsd_list_dma);
                        kfree(dif_dsd);
                        difctx->no_dif_bundl--;
                }

                list_for_each_entry_safe(dif_dsd, nxt_dsd,
                    &difctx->ldif_dsd_list, list) {
                        list_del(&dif_dsd->list);
                        dma_pool_free(ha->dl_dma_pool, dif_dsd->dsd_addr,
                            dif_dsd->dsd_list_dma);
                        kfree(dif_dsd);
                        difctx->no_ldif_dsd--;
                }

                if (difctx->no_ldif_dsd) {
                        ql_dbg(ql_dbg_tgt+ql_dbg_verbose, sp->vha, 0xe022,
                            "%s: difctx->no_ldif_dsd=%x\n",
                            __func__, difctx->no_ldif_dsd);
                }

                if (difctx->no_dif_bundl) {
                        ql_dbg(ql_dbg_tgt+ql_dbg_verbose, sp->vha, 0xe022,
                            "%s: difctx->no_dif_bundl=%x\n",
                            __func__, difctx->no_dif_bundl);
                }
                sp->flags &= ~SRB_DIF_BUNDL_DMA_VALID;
        }

        if (sp->flags & SRB_FCP_CMND_DMA_VALID) {
                struct ct6_dsd *ctx1 = sp->u.scmd.ct6_ctx;

                dma_pool_free(ha->fcp_cmnd_dma_pool, ctx1->fcp_cmnd,
                    ctx1->fcp_cmnd_dma);
                list_splice(&ctx1->dsd_list, &ha->gbl_dsd_list);
                ha->gbl_dsd_inuse -= ctx1->dsd_use_cnt;
                ha->gbl_dsd_avail += ctx1->dsd_use_cnt;
                mempool_free(ctx1, ha->ctx_mempool);
                sp->flags &= ~SRB_FCP_CMND_DMA_VALID;
        }

        if (sp->flags & SRB_CRC_CTX_DMA_VALID) {
                struct crc_context *ctx0 = sp->u.scmd.crc_ctx;

                dma_pool_free(ha->dl_dma_pool, ctx0, ctx0->crc_ctx_dma);
                sp->flags &= ~SRB_CRC_CTX_DMA_VALID;
        }
}

void qla2xxx_qpair_sp_compl(srb_t *sp, int res)
{
        struct scsi_cmnd *cmd = GET_CMD_SP(sp);
        struct completion *comp = sp->comp;

        sp->free(sp);
        cmd->result = res;
        CMD_SP(cmd) = NULL;
        cmd->scsi_done(cmd);
        if (comp)
                complete(comp);
}

static int
qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
{
        scsi_qla_host_t *vha = shost_priv(host);
        fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
        struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
        struct qla_hw_data *ha = vha->hw;
        struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
        srb_t *sp;
        int rval;

        if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags)) ||
            WARN_ON_ONCE(!rport)) {
                cmd->result = DID_NO_CONNECT << 16;
                goto qc24_fail_command;
        }

        if (ha->mqenable) {
                uint32_t tag;
                uint16_t hwq;
                struct qla_qpair *qpair = NULL;

                tag = blk_mq_unique_tag(scsi_cmd_to_rq(cmd));
                hwq = blk_mq_unique_tag_to_hwq(tag);
                qpair = ha->queue_pair_map[hwq];

                if (qpair)
                        return qla2xxx_mqueuecommand(host, cmd, qpair);
        }

        if (ha->flags.eeh_busy) {
                if (ha->flags.pci_channel_io_perm_failure) {
                        ql_dbg(ql_dbg_aer, vha, 0x9010,
                            "PCI Channel IO permanent failure, exiting "
                            "cmd=%p.\n", cmd);
                        cmd->result = DID_NO_CONNECT << 16;
                } else {
                        ql_dbg(ql_dbg_aer, vha, 0x9011,
                            "EEH_Busy, Requeuing the cmd=%p.\n", cmd);
                        cmd->result = DID_REQUEUE << 16;
                }
                goto qc24_fail_command;
        }

        rval = fc_remote_port_chkready(rport);
        if (rval) {
                cmd->result = rval;
                ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3003,
                    "fc_remote_port_chkready failed for cmd=%p, rval=0x%x.\n",
                    cmd, rval);
                goto qc24_fail_command;
        }

        if (!vha->flags.difdix_supported &&
                scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
                        ql_dbg(ql_dbg_io, vha, 0x3004,
                            "DIF Cap not reg, fail DIF capable cmd's:%p.\n",
                            cmd);
                        cmd->result = DID_NO_CONNECT << 16;
                        goto qc24_fail_command;
        }

        if (!fcport || fcport->deleted) {
                cmd->result = DID_IMM_RETRY << 16;
                goto qc24_fail_command;
        }

        if (atomic_read(&fcport->state) != FCS_ONLINE || fcport->deleted) {
                if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
                        atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
                        ql_dbg(ql_dbg_io, vha, 0x3005,
                            "Returning DNC, fcport_state=%d loop_state=%d.\n",
                            atomic_read(&fcport->state),
                            atomic_read(&base_vha->loop_state));
                        cmd->result = DID_NO_CONNECT << 16;
                        goto qc24_fail_command;
                }
                goto qc24_target_busy;
        }

        /*
         * Return target busy if we've received a non-zero retry_delay_timer
         * in a FCP_RSP.
         */
        if (fcport->retry_delay_timestamp == 0) {
                /* retry delay not set */
        } else if (time_after(jiffies, fcport->retry_delay_timestamp))
                fcport->retry_delay_timestamp = 0;
        else
                goto qc24_target_busy;

        sp = scsi_cmd_priv(cmd);
        qla2xxx_init_sp(sp, vha, vha->hw->base_qpair, fcport);

        sp->u.scmd.cmd = cmd;
        sp->type = SRB_SCSI_CMD;

        CMD_SP(cmd) = (void *)sp;
        sp->free = qla2x00_sp_free_dma;
        sp->done = qla2x00_sp_compl;

        rval = ha->isp_ops->start_scsi(sp);
        if (rval != QLA_SUCCESS) {
                ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3013,
                    "Start scsi failed rval=%d for cmd=%p.\n", rval, cmd);
                goto qc24_host_busy_free_sp;
        }

        return 0;

qc24_host_busy_free_sp:
        sp->free(sp);

qc24_target_busy:
        return SCSI_MLQUEUE_TARGET_BUSY;

qc24_fail_command:
        cmd->scsi_done(cmd);

        return 0;
}

/* For MQ supported I/O */
int
qla2xxx_mqueuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd,
    struct qla_qpair *qpair)
{
        scsi_qla_host_t *vha = shost_priv(host);
        fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
        struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
        struct qla_hw_data *ha = vha->hw;
        struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
        srb_t *sp;
        int rval;

        rval = rport ? fc_remote_port_chkready(rport) : (DID_NO_CONNECT << 16);
        if (rval) {
                cmd->result = rval;
                ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3076,
                    "fc_remote_port_chkready failed for cmd=%p, rval=0x%x.\n",
                    cmd, rval);
                goto qc24_fail_command;
        }

        if (!qpair->online) {
                ql_dbg(ql_dbg_io, vha, 0x3077,
                       "qpair not online. eeh_busy=%d.\n", ha->flags.eeh_busy);
                cmd->result = DID_NO_CONNECT << 16;
                goto qc24_fail_command;
        }

        if (!fcport || fcport->deleted) {
                cmd->result = DID_IMM_RETRY << 16;
                goto qc24_fail_command;
        }

        if (atomic_read(&fcport->state) != FCS_ONLINE || fcport->deleted) {
                if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
                        atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
                        ql_dbg(ql_dbg_io, vha, 0x3077,
                            "Returning DNC, fcport_state=%d loop_state=%d.\n",
                            atomic_read(&fcport->state),
                            atomic_read(&base_vha->loop_state));
                        cmd->result = DID_NO_CONNECT << 16;
                        goto qc24_fail_command;

                }
                goto qc24_target_busy;
        }

        /*
         * Return target busy if we've received a non-zero retry_delay_timer
         * in a FCP_RSP.
         */
        if (fcport->retry_delay_timestamp == 0) {
                /* retry delay not set */
        } else if (time_after(jiffies, fcport->retry_delay_timestamp))
                fcport->retry_delay_timestamp = 0;
        else
                goto qc24_target_busy;

        sp = scsi_cmd_priv(cmd);
        qla2xxx_init_sp(sp, vha, qpair, fcport);

        sp->u.scmd.cmd = cmd;
        sp->type = SRB_SCSI_CMD;
        CMD_SP(cmd) = (void *)sp;
        sp->free = qla2xxx_qpair_sp_free_dma;
        sp->done = qla2xxx_qpair_sp_compl;

        rval = ha->isp_ops->start_scsi_mq(sp);
        if (rval != QLA_SUCCESS) {
                ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3078,
                    "Start scsi failed rval=%d for cmd=%p.\n", rval, cmd);
                goto qc24_host_busy_free_sp;
        }

        return 0;

qc24_host_busy_free_sp:
        sp->free(sp);

qc24_target_busy:
        return SCSI_MLQUEUE_TARGET_BUSY;

qc24_fail_command:
        cmd->scsi_done(cmd);

        return 0;
}

/*
 * qla2x00_eh_wait_on_command
 *    Waits for the command to be returned by the Firmware for some
 *    max time.
 *
 * Input:
 *    cmd = Scsi Command to wait on.
 *
 * Return:
 *    Completed in time : QLA_SUCCESS
 *    Did not complete in time : QLA_FUNCTION_FAILED
 */
static int
qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd)
{
#define ABORT_POLLING_PERIOD    1000
#define ABORT_WAIT_ITER         ((2 * 1000) / (ABORT_POLLING_PERIOD))
        unsigned long wait_iter = ABORT_WAIT_ITER;
        scsi_qla_host_t *vha = shost_priv(cmd->device->host);
        struct qla_hw_data *ha = vha->hw;
        int ret = QLA_SUCCESS;

        if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) {
                ql_dbg(ql_dbg_taskm, vha, 0x8005,
                    "Return:eh_wait.\n");
                return ret;
        }

        while (CMD_SP(cmd) && wait_iter--) {
                msleep(ABORT_POLLING_PERIOD);
        }
        if (CMD_SP(cmd))
                ret = QLA_FUNCTION_FAILED;

        return ret;
}

/*
 * qla2x00_wait_for_hba_online
 *    Wait till the HBA is online after going through
 *    <= MAX_RETRIES_OF_ISP_ABORT  or
 *    finally HBA is disabled ie marked offline
 *
 * Input:
 *     ha - pointer to host adapter structure
 *
 * Note:
 *    Does context switching-Release SPIN_LOCK
 *    (if any) before calling this routine.
 *
 * Return:
 *    Success (Adapter is online) : 0
 *    Failed  (Adapter is offline/disabled) : 1
 */
int
qla2x00_wait_for_hba_online(scsi_qla_host_t *vha)
{
        int             return_status;
        unsigned long   wait_online;
        struct qla_hw_data *ha = vha->hw;
        scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);

        wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
        while (((test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) ||
            test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
            test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
            ha->dpc_active) && time_before(jiffies, wait_online)) {

                msleep(1000);
        }
        if (base_vha->flags.online)
                return_status = QLA_SUCCESS;
        else
                return_status = QLA_FUNCTION_FAILED;

        return (return_status);
}

static inline int test_fcport_count(scsi_qla_host_t *vha)
{
        struct qla_hw_data *ha = vha->hw;
        unsigned long flags;
        int res;
        /* Return 0 = sleep, x=wake */

        spin_lock_irqsave(&ha->tgt.sess_lock, flags);
        ql_dbg(ql_dbg_init, vha, 0x00ec,
            "tgt %p, fcport_count=%d\n",
            vha, vha->fcport_count);
        res = (vha->fcport_count == 0);
        if  (res) {
                struct fc_port *fcport;

                list_for_each_entry(fcport, &vha->vp_fcports, list) {
                        if (fcport->deleted != QLA_SESS_DELETED) {
                                /* session(s) may not be fully logged in
                                 * (ie fcport_count=0), but session
                                 * deletion thread(s) may be inflight.
                                 */

                                res = 0;
                                break;
                        }
                }
        }
        spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);

        return res;
}

/*
 * qla2x00_wait_for_sess_deletion can only be called from remove_one.
 * it has dependency on UNLOADING flag to stop device discovery
 */
void
qla2x00_wait_for_sess_deletion(scsi_qla_host_t *vha)
{
        u8 i;

        qla2x00_mark_all_devices_lost(vha);

        for (i = 0; i < 10; i++) {
                if (wait_event_timeout(vha->fcport_waitQ,
                    test_fcport_count(vha), HZ) > 0)
                        break;
        }

        flush_workqueue(vha->hw->wq);
}

/*
 * qla2x00_wait_for_hba_ready
 * Wait till the HBA is ready before doing driver unload
 *
 * Input:
 *     ha - pointer to host adapter structure
 *
 * Note:
 *    Does context switching-Release SPIN_LOCK
 *    (if any) before calling this routine.
 *
 */
static void
qla2x00_wait_for_hba_ready(scsi_qla_host_t *vha)
{
        struct qla_hw_data *ha = vha->hw;
        scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);

        while ((qla2x00_reset_active(vha) || ha->dpc_active ||
                ha->flags.mbox_busy) ||
               test_bit(FX00_RESET_RECOVERY, &vha->dpc_flags) ||
               test_bit(FX00_TARGET_SCAN, &vha->dpc_flags)) {
                if (test_bit(UNLOADING, &base_vha->dpc_flags))
                        break;
                msleep(1000);
        }
}

int
qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha)
{
        int             return_status;
        unsigned long   wait_reset;
        struct qla_hw_data *ha = vha->hw;
        scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);

        wait_reset = jiffies + (MAX_LOOP_TIMEOUT * HZ);
        while (((test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) ||
            test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
            test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
            ha->dpc_active) && time_before(jiffies, wait_reset)) {

                msleep(1000);

                if (!test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
                    ha->flags.chip_reset_done)
                        break;
        }
        if (ha->flags.chip_reset_done)
                return_status = QLA_SUCCESS;
        else
                return_status = QLA_FUNCTION_FAILED;

        return return_status;
}

/**************************************************************************
* qla2xxx_eh_abort
*
* Description:
*    The abort function will abort the specified command.
*
* Input:
*    cmd = Linux SCSI command packet to be aborted.
*
* Returns:
*    Either SUCCESS or FAILED.
*
* Note:
*    Only return FAILED if command not returned by firmware.
**************************************************************************/
static int
qla2xxx_eh_abort(struct scsi_cmnd *cmd)
{
        scsi_qla_host_t *vha = shost_priv(cmd->device->host);
        DECLARE_COMPLETION_ONSTACK(comp);
        srb_t *sp;
        int ret;
        unsigned int id;
        uint64_t lun;
        int rval;
        struct qla_hw_data *ha = vha->hw;
        uint32_t ratov_j;
        struct qla_qpair *qpair;
        unsigned long flags;

        if (qla2x00_isp_reg_stat(ha)) {
                ql_log(ql_log_info, vha, 0x8042,
                    "PCI/Register disconnect, exiting.\n");
                qla_pci_set_eeh_busy(vha);
                return FAILED;
        }

        ret = fc_block_scsi_eh(cmd);
        if (ret != 0)
                return ret;

        sp = scsi_cmd_priv(cmd);
        qpair = sp->qpair;

        vha->cmd_timeout_cnt++;

        if ((sp->fcport && sp->fcport->deleted) || !qpair)
                return SUCCESS;

        spin_lock_irqsave(qpair->qp_lock_ptr, flags);
        sp->comp = &comp;
        spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);


        id = cmd->device->id;
        lun = cmd->device->lun;

        ql_dbg(ql_dbg_taskm, vha, 0x8002,
            "Aborting from RISC nexus=%ld:%d:%llu sp=%p cmd=%p handle=%x\n",
            vha->host_no, id, lun, sp, cmd, sp->handle);

        /*
         * Abort will release the original Command/sp from FW. Let the
         * original command call scsi_done. In return, he will wakeup
         * this sleeping thread.
         */
        rval = ha->isp_ops->abort_command(sp);

        ql_dbg(ql_dbg_taskm, vha, 0x8003,
               "Abort command mbx cmd=%p, rval=%x.\n", cmd, rval);

        /* Wait for the command completion. */
        ratov_j = ha->r_a_tov/10 * 4 * 1000;
        ratov_j = msecs_to_jiffies(ratov_j);
        switch (rval) {
        case QLA_SUCCESS:
                if (!wait_for_completion_timeout(&comp, ratov_j)) {
                        ql_dbg(ql_dbg_taskm, vha, 0xffff,
                            "%s: Abort wait timer (4 * R_A_TOV[%d]) expired\n",
                            __func__, ha->r_a_tov/10);
                        ret = FAILED;
                } else {
                        ret = SUCCESS;
                }
                break;
        default:
                ret = FAILED;
                break;
        }

        sp->comp = NULL;

        ql_log(ql_log_info, vha, 0x801c,
            "Abort command issued nexus=%ld:%d:%llu -- %x.\n",
            vha->host_no, id, lun, ret);

        return ret;
}

/*
 * Returns: QLA_SUCCESS or QLA_FUNCTION_FAILED.
 */
int
qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t,
        uint64_t l, enum nexus_wait_type type)
{
        int cnt, match, status;
        unsigned long flags;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req;
        srb_t *sp;
        struct scsi_cmnd *cmd;

        status = QLA_SUCCESS;

        spin_lock_irqsave(&ha->hardware_lock, flags);
        req = vha->req;
        for (cnt = 1; status == QLA_SUCCESS &&
                cnt < req->num_outstanding_cmds; cnt++) {
                sp = req->outstanding_cmds[cnt];
                if (!sp)
                        continue;
                if (sp->type != SRB_SCSI_CMD)
                        continue;
                if (vha->vp_idx != sp->vha->vp_idx)
                        continue;
                match = 0;
                cmd = GET_CMD_SP(sp);
                switch (type) {
                case WAIT_HOST:
                        match = 1;
                        break;
                case WAIT_TARGET:
                        match = cmd->device->id == t;
                        break;
                case WAIT_LUN:
                        match = (cmd->device->id == t &&
                                cmd->device->lun == l);
                        break;
                }
                if (!match)
                        continue;

                spin_unlock_irqrestore(&ha->hardware_lock, flags);
                status = qla2x00_eh_wait_on_command(cmd);
                spin_lock_irqsave(&ha->hardware_lock, flags);
        }
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        return status;
}

static char *reset_errors[] = {
        "HBA not online",
        "HBA not ready",
        "Task management failed",
        "Waiting for command completions",
};

static int
qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
{
        struct scsi_device *sdev = cmd->device;
        scsi_qla_host_t *vha = shost_priv(sdev->host);
        struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
        fc_port_t *fcport = (struct fc_port *) sdev->hostdata;
        struct qla_hw_data *ha = vha->hw;
        int err;

        if (qla2x00_isp_reg_stat(ha)) {
                ql_log(ql_log_info, vha, 0x803e,
                    "PCI/Register disconnect, exiting.\n");
                qla_pci_set_eeh_busy(vha);
                return FAILED;
        }

        if (!fcport) {
                return FAILED;
        }

        err = fc_block_rport(rport);
        if (err != 0)
                return err;

        if (fcport->deleted)
                return SUCCESS;

        ql_log(ql_log_info, vha, 0x8009,
            "DEVICE RESET ISSUED nexus=%ld:%d:%llu cmd=%p.\n", vha->host_no,
            sdev->id, sdev->lun, cmd);

        err = 0;
        if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
                ql_log(ql_log_warn, vha, 0x800a,
                    "Wait for hba online failed for cmd=%p.\n", cmd);
                goto eh_reset_failed;
        }
        err = 2;
        if (ha->isp_ops->lun_reset(fcport, sdev->lun, 1)
                != QLA_SUCCESS) {
                ql_log(ql_log_warn, vha, 0x800c,
                    "do_reset failed for cmd=%p.\n", cmd);
                goto eh_reset_failed;
        }
        err = 3;
        if (qla2x00_eh_wait_for_pending_commands(vha, sdev->id,
            sdev->lun, WAIT_LUN) != QLA_SUCCESS) {
                ql_log(ql_log_warn, vha, 0x800d,
                    "wait for pending cmds failed for cmd=%p.\n", cmd);
                goto eh_reset_failed;
        }

        ql_log(ql_log_info, vha, 0x800e,
            "DEVICE RESET SUCCEEDED nexus:%ld:%d:%llu cmd=%p.\n",
            vha->host_no, sdev->id, sdev->lun, cmd);

        return SUCCESS;

eh_reset_failed:
        ql_log(ql_log_info, vha, 0x800f,
            "DEVICE RESET FAILED: %s nexus=%ld:%d:%llu cmd=%p.\n",
            reset_errors[err], vha->host_no, sdev->id, sdev->lun,
            cmd);
        vha->reset_cmd_err_cnt++;
        return FAILED;
}

static int
qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
{
        struct scsi_device *sdev = cmd->device;
        struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
        scsi_qla_host_t *vha = shost_priv(rport_to_shost(rport));
        struct qla_hw_data *ha = vha->hw;
        fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
        int err;

        if (qla2x00_isp_reg_stat(ha)) {
                ql_log(ql_log_info, vha, 0x803f,
                    "PCI/Register disconnect, exiting.\n");
                qla_pci_set_eeh_busy(vha);
                return FAILED;
        }

        if (!fcport) {
                return FAILED;
        }

        err = fc_block_rport(rport);
        if (err != 0)
                return err;

        if (fcport->deleted)
                return SUCCESS;

        ql_log(ql_log_info, vha, 0x8009,
            "TARGET RESET ISSUED nexus=%ld:%d cmd=%p.\n", vha->host_no,
            sdev->id, cmd);

        err = 0;
        if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
                ql_log(ql_log_warn, vha, 0x800a,
                    "Wait for hba online failed for cmd=%p.\n", cmd);
                goto eh_reset_failed;
        }
        err = 2;
        if (ha->isp_ops->target_reset(fcport, 0, 0) != QLA_SUCCESS) {
                ql_log(ql_log_warn, vha, 0x800c,
                    "target_reset failed for cmd=%p.\n", cmd);
                goto eh_reset_failed;
        }
        err = 3;
        if (qla2x00_eh_wait_for_pending_commands(vha, sdev->id,
            0, WAIT_TARGET) != QLA_SUCCESS) {
                ql_log(ql_log_warn, vha, 0x800d,
                    "wait for pending cmds failed for cmd=%p.\n", cmd);
                goto eh_reset_failed;
        }

        ql_log(ql_log_info, vha, 0x800e,
            "TARGET RESET SUCCEEDED nexus:%ld:%d cmd=%p.\n",
            vha->host_no, sdev->id, cmd);

        return SUCCESS;

eh_reset_failed:
        ql_log(ql_log_info, vha, 0x800f,
            "TARGET RESET FAILED: %s nexus=%ld:%d:%llu cmd=%p.\n",
            reset_errors[err], vha->host_no, cmd->device->id, cmd->device->lun,
            cmd);
        vha->reset_cmd_err_cnt++;
        return FAILED;
}

/**************************************************************************
* qla2xxx_eh_bus_reset
*
* Description:
*    The bus reset function will reset the bus and abort any executing
*    commands.
*
* Input:
*    cmd = Linux SCSI command packet of the command that cause the
*          bus reset.
*
* Returns:
*    SUCCESS/FAILURE (defined as macro in scsi.h).
*
**************************************************************************/
static int
qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
{
        scsi_qla_host_t *vha = shost_priv(cmd->device->host);
        int ret = FAILED;
        unsigned int id;
        uint64_t lun;
        struct qla_hw_data *ha = vha->hw;

        if (qla2x00_isp_reg_stat(ha)) {
                ql_log(ql_log_info, vha, 0x8040,
                    "PCI/Register disconnect, exiting.\n");
                qla_pci_set_eeh_busy(vha);
                return FAILED;
        }

        id = cmd->device->id;
        lun = cmd->device->lun;

        if (qla2x00_chip_is_down(vha))
                return ret;

        ql_log(ql_log_info, vha, 0x8012,
            "BUS RESET ISSUED nexus=%ld:%d:%llu.\n", vha->host_no, id, lun);

        if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
                ql_log(ql_log_fatal, vha, 0x8013,
                    "Wait for hba online failed board disabled.\n");
                goto eh_bus_reset_done;
        }

        if (qla2x00_loop_reset(vha) == QLA_SUCCESS)
                ret = SUCCESS;

        if (ret == FAILED)
                goto eh_bus_reset_done;

        /* Flush outstanding commands. */
        if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST) !=
            QLA_SUCCESS) {
                ql_log(ql_log_warn, vha, 0x8014,
                    "Wait for pending commands failed.\n");
                ret = FAILED;
        }

eh_bus_reset_done:
        ql_log(ql_log_warn, vha, 0x802b,
            "BUS RESET %s nexus=%ld:%d:%llu.\n",
            (ret == FAILED) ? "FAILED" : "SUCCEEDED", vha->host_no, id, lun);

        return ret;
}

/**************************************************************************
* qla2xxx_eh_host_reset
*
* Description:
*    The reset function will reset the Adapter.
*
* Input:
*      cmd = Linux SCSI command packet of the command that cause the
*            adapter reset.
*
* Returns:
*      Either SUCCESS or FAILED.
*
* Note:
**************************************************************************/
static int
qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
{
        scsi_qla_host_t *vha = shost_priv(cmd->device->host);
        struct qla_hw_data *ha = vha->hw;
        int ret = FAILED;
        unsigned int id;
        uint64_t lun;
        scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);

        if (qla2x00_isp_reg_stat(ha)) {
                ql_log(ql_log_info, vha, 0x8041,
                    "PCI/Register disconnect, exiting.\n");
                qla_pci_set_eeh_busy(vha);
                return SUCCESS;
        }

        id = cmd->device->id;
        lun = cmd->device->lun;

        ql_log(ql_log_info, vha, 0x8018,
            "ADAPTER RESET ISSUED nexus=%ld:%d:%llu.\n", vha->host_no, id, lun);

        /*
         * No point in issuing another reset if one is active.  Also do not
         * attempt a reset if we are updating flash.
         */
        if (qla2x00_reset_active(vha) || ha->optrom_state != QLA_SWAITING)
                goto eh_host_reset_lock;

        if (vha != base_vha) {
                if (qla2x00_vp_abort_isp(vha))
                        goto eh_host_reset_lock;
        } else {
                if (IS_P3P_TYPE(vha->hw)) {
                        if (!qla82xx_fcoe_ctx_reset(vha)) {
                                /* Ctx reset success */
                                ret = SUCCESS;
                                goto eh_host_reset_lock;
                        }
                        /* fall thru if ctx reset failed */
                }
                if (ha->wq)
                        flush_workqueue(ha->wq);

                set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
                if (ha->isp_ops->abort_isp(base_vha)) {
                        clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
                        /* failed. schedule dpc to try */
                        set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);

                        if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
                                ql_log(ql_log_warn, vha, 0x802a,
                                    "wait for hba online failed.\n");
                                goto eh_host_reset_lock;
                        }
                }
                clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
        }

        /* Waiting for command to be returned to OS.*/
        if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST) ==
                QLA_SUCCESS)
                ret = SUCCESS;

eh_host_reset_lock:
        ql_log(ql_log_info, vha, 0x8017,
            "ADAPTER RESET %s nexus=%ld:%d:%llu.\n",
            (ret == FAILED) ? "FAILED" : "SUCCEEDED", vha->host_no, id, lun);

        return ret;
}

/*
* qla2x00_loop_reset
*      Issue loop reset.
*
* Input:
*      ha = adapter block pointer.
*
* Returns:
*      0 = success
*/
int
qla2x00_loop_reset(scsi_qla_host_t *vha)
{
        int ret;
        struct fc_port *fcport;
        struct qla_hw_data *ha = vha->hw;

        if (IS_QLAFX00(ha)) {
                return qlafx00_loop_reset(vha);
        }

        if (ql2xtargetreset == 1 && ha->flags.enable_target_reset) {
                list_for_each_entry(fcport, &vha->vp_fcports, list) {
                        if (fcport->port_type != FCT_TARGET)
                                continue;

                        ret = ha->isp_ops->target_reset(fcport, 0, 0);
                        if (ret != QLA_SUCCESS) {
                                ql_dbg(ql_dbg_taskm, vha, 0x802c,
                                    "Bus Reset failed: Reset=%d "
                                    "d_id=%x.\n", ret, fcport->d_id.b24);
                        }
                }
        }


        if (ha->flags.enable_lip_full_login && !IS_CNA_CAPABLE(ha)) {
                atomic_set(&vha->loop_state, LOOP_DOWN);
                atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
                qla2x00_mark_all_devices_lost(vha);
                ret = qla2x00_full_login_lip(vha);
                if (ret != QLA_SUCCESS) {
                        ql_dbg(ql_dbg_taskm, vha, 0x802d,
                            "full_login_lip=%d.\n", ret);
                }
        }

        if (ha->flags.enable_lip_reset) {
                ret = qla2x00_lip_reset(vha);
                if (ret != QLA_SUCCESS)
                        ql_dbg(ql_dbg_taskm, vha, 0x802e,
                            "lip_reset failed (%d).\n", ret);
        }

        /* Issue marker command only when we are going to start the I/O */
        vha->marker_needed = 1;

        return QLA_SUCCESS;
}

/*
 * The caller must ensure that no completion interrupts will happen
 * while this function is in progress.
 */
static void qla2x00_abort_srb(struct qla_qpair *qp, srb_t *sp, const int res,
                              unsigned long *flags)
        __releases(qp->qp_lock_ptr)
        __acquires(qp->qp_lock_ptr)
{
        DECLARE_COMPLETION_ONSTACK(comp);
        scsi_qla_host_t *vha = qp->vha;
        struct qla_hw_data *ha = vha->hw;
        struct scsi_cmnd *cmd = GET_CMD_SP(sp);
        int rval;
        bool ret_cmd;
        uint32_t ratov_j;

        lockdep_assert_held(qp->qp_lock_ptr);

        if (qla2x00_chip_is_down(vha)) {
                sp->done(sp, res);
                return;
        }

        if (sp->type == SRB_NVME_CMD || sp->type == SRB_NVME_LS ||
            (sp->type == SRB_SCSI_CMD && !ha->flags.eeh_busy &&
             !test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) &&
             !qla2x00_isp_reg_stat(ha))) {
                if (sp->comp) {
                        sp->done(sp, res);
                        return;
                }

                sp->comp = &comp;
                spin_unlock_irqrestore(qp->qp_lock_ptr, *flags);

                rval = ha->isp_ops->abort_command(sp);
                /* Wait for command completion. */
                ret_cmd = false;
                ratov_j = ha->r_a_tov/10 * 4 * 1000;
                ratov_j = msecs_to_jiffies(ratov_j);
                switch (rval) {
                case QLA_SUCCESS:
                        if (wait_for_completion_timeout(&comp, ratov_j)) {
                                ql_dbg(ql_dbg_taskm, vha, 0xffff,
                                    "%s: Abort wait timer (4 * R_A_TOV[%d]) expired\n",
                                    __func__, ha->r_a_tov/10);
                                ret_cmd = true;
                        }
                        /* else FW return SP to driver */
                        break;
                default:
                        ret_cmd = true;
                        break;
                }

                spin_lock_irqsave(qp->qp_lock_ptr, *flags);
                if (ret_cmd && blk_mq_request_started(scsi_cmd_to_rq(cmd)))
                        sp->done(sp, res);
        } else {
                sp->done(sp, res);
        }
}

/*
 * The caller must ensure that no completion interrupts will happen
 * while this function is in progress.
 */
static void
__qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
{
        int cnt;
        unsigned long flags;
        srb_t *sp;
        scsi_qla_host_t *vha = qp->vha;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req;
        struct qla_tgt *tgt = vha->vha_tgt.qla_tgt;
        struct qla_tgt_cmd *cmd;

        if (!ha->req_q_map)
                return;
        spin_lock_irqsave(qp->qp_lock_ptr, flags);
        req = qp->req;
        for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
                sp = req->outstanding_cmds[cnt];
                if (sp) {
                        switch (sp->cmd_type) {
                        case TYPE_SRB:
                                qla2x00_abort_srb(qp, sp, res, &flags);
                                break;
                        case TYPE_TGT_CMD:
                                if (!vha->hw->tgt.tgt_ops || !tgt ||
                                    qla_ini_mode_enabled(vha)) {
                                        ql_dbg(ql_dbg_tgt_mgt, vha, 0xf003,
                                            "HOST-ABORT-HNDLR: dpc_flags=%lx. Target mode disabled\n",
                                            vha->dpc_flags);
                                        continue;
                                }
                                cmd = (struct qla_tgt_cmd *)sp;
                                cmd->aborted = 1;
                                break;
                        case TYPE_TGT_TMCMD:
                                /* Skip task management functions. */
                                break;
                        default:
                                break;
                        }
                        req->outstanding_cmds[cnt] = NULL;
                }
        }
        spin_unlock_irqrestore(qp->qp_lock_ptr, flags);
}

/*
 * The caller must ensure that no completion interrupts will happen
 * while this function is in progress.
 */
void
qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
{
        int que;
        struct qla_hw_data *ha = vha->hw;

        /* Continue only if initialization complete. */
        if (!ha->base_qpair)
                return;
        __qla2x00_abort_all_cmds(ha->base_qpair, res);

        if (!ha->queue_pair_map)
                return;
        for (que = 0; que < ha->max_qpairs; que++) {
                if (!ha->queue_pair_map[que])
                        continue;

                __qla2x00_abort_all_cmds(ha->queue_pair_map[que], res);
        }
}

static int
qla2xxx_slave_alloc(struct scsi_device *sdev)
{
        struct fc_rport *rport = starget_to_rport(scsi_target(sdev));

        if (!rport || fc_remote_port_chkready(rport))
                return -ENXIO;

        sdev->hostdata = *(fc_port_t **)rport->dd_data;

        return 0;
}

static int
qla2xxx_slave_configure(struct scsi_device *sdev)
{
        scsi_qla_host_t *vha = shost_priv(sdev->host);
        struct req_que *req = vha->req;

        if (IS_T10_PI_CAPABLE(vha->hw))
                blk_queue_update_dma_alignment(sdev->request_queue, 0x7);

        scsi_change_queue_depth(sdev, req->max_q_depth);
        return 0;
}

static void
qla2xxx_slave_destroy(struct scsi_device *sdev)
{
        sdev->hostdata = NULL;
}

/**
 * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
 * @ha: HA context
 *
 * At exit, the @ha's flags.enable_64bit_addressing set to indicated
 * supported addressing method.
 */
static void
qla2x00_config_dma_addressing(struct qla_hw_data *ha)
{
        /* Assume a 32bit DMA mask. */
        ha->flags.enable_64bit_addressing = 0;

        if (!dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(64))) {
                /* Any upper-dword bits set? */
                if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
                    !dma_set_coherent_mask(&ha->pdev->dev, DMA_BIT_MASK(64))) {
                        /* Ok, a 64bit DMA mask is applicable. */
                        ha->flags.enable_64bit_addressing = 1;
                        ha->isp_ops->calc_req_entries = qla2x00_calc_iocbs_64;
                        ha->isp_ops->build_iocbs = qla2x00_build_scsi_iocbs_64;
                        return;
                }
        }

        dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32));
        dma_set_coherent_mask(&ha->pdev->dev, DMA_BIT_MASK(32));
}

static void
qla2x00_enable_intrs(struct qla_hw_data *ha)
{
        unsigned long flags = 0;
        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

        spin_lock_irqsave(&ha->hardware_lock, flags);
        ha->interrupts_on = 1;
        /* enable risc and host interrupts */
        wrt_reg_word(&reg->ictrl, ICR_EN_INT | ICR_EN_RISC);
        rd_reg_word(&reg->ictrl);
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

}

static void
qla2x00_disable_intrs(struct qla_hw_data *ha)
{
        unsigned long flags = 0;
        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

        spin_lock_irqsave(&ha->hardware_lock, flags);
        ha->interrupts_on = 0;
        /* disable risc and host interrupts */
        wrt_reg_word(&reg->ictrl, 0);
        rd_reg_word(&reg->ictrl);
        spin_unlock_irqrestore(&ha->hardware_lock, flags);
}

static void
qla24xx_enable_intrs(struct qla_hw_data *ha)
{
        unsigned long flags = 0;
        struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

        spin_lock_irqsave(&ha->hardware_lock, flags);
        ha->interrupts_on = 1;
        wrt_reg_dword(&reg->ictrl, ICRX_EN_RISC_INT);
        rd_reg_dword(&reg->ictrl);
        spin_unlock_irqrestore(&ha->hardware_lock, flags);
}

static void
qla24xx_disable_intrs(struct qla_hw_data *ha)
{
        unsigned long flags = 0;
        struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

        if (IS_NOPOLLING_TYPE(ha))
                return;
        spin_lock_irqsave(&ha->hardware_lock, flags);
        ha->interrupts_on = 0;
        wrt_reg_dword(&reg->ictrl, 0);
        rd_reg_dword(&reg->ictrl);
        spin_unlock_irqrestore(&ha->hardware_lock, flags);
}

static int
qla2x00_iospace_config(struct qla_hw_data *ha)

{
        resource_size_t pio;
        uint16_t msix;

        if (pci_request_selected_regions(ha->pdev, ha->bars,
            QLA2XXX_DRIVER_NAME)) {
                ql_log_pci(ql_log_fatal, ha->pdev, 0x0011,
                    "Failed to reserve PIO/MMIO regions (%s), aborting.\n",
                    pci_name(ha->pdev));
                goto iospace_error_exit;
        }
        if (!(ha->bars & 1))
                goto skip_pio;

        /* We only need PIO for Flash operations on ISP2312 v2 chips. */
        pio = pci_resource_start(ha->pdev, 0);
        if (pci_resource_flags(ha->pdev, 0) & IORESOURCE_IO) {
                if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) {
                        ql_log_pci(ql_log_warn, ha->pdev, 0x0012,
                            "Invalid pci I/O region size (%s).\n",
                            pci_name(ha->pdev));
                        pio = 0;
                }
        } else {
                ql_log_pci(ql_log_warn, ha->pdev, 0x0013,
                    "Region #0 no a PIO resource (%s).\n",
                    pci_name(ha->pdev));
                pio = 0;
        }
        ha->pio_address = pio;
        ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0014,
            "PIO address=%llu.\n",
            (unsigned long long)ha->pio_address);

skip_pio:
        /* Use MMIO operations for all accesses. */
        if (!(pci_resource_flags(ha->pdev, 1) & IORESOURCE_MEM)) {
                ql_log_pci(ql_log_fatal, ha->pdev, 0x0015,
                    "Region #1 not an MMIO resource (%s), aborting.\n",
                    pci_name(ha->pdev));
                goto iospace_error_exit;
        }
        if (pci_resource_len(ha->pdev, 1) < MIN_IOBASE_LEN) {
                ql_log_pci(ql_log_fatal, ha->pdev, 0x0016,
                    "Invalid PCI mem region size (%s), aborting.\n",
                    pci_name(ha->pdev));
                goto iospace_error_exit;
        }

        ha->iobase = ioremap(pci_resource_start(ha->pdev, 1), MIN_IOBASE_LEN);
        if (!ha->iobase) {
                ql_log_pci(ql_log_fatal, ha->pdev, 0x0017,
                    "Cannot remap MMIO (%s), aborting.\n",
                    pci_name(ha->pdev));
                goto iospace_error_exit;
        }

        /* Determine queue resources */
        ha->max_req_queues = ha->max_rsp_queues = 1;
        ha->msix_count = QLA_BASE_VECTORS;

        /* Check if FW supports MQ or not */
        if (!(ha->fw_attributes & BIT_6))
                goto mqiobase_exit;

        if (!ql2xmqsupport || !ql2xnvmeenable ||
            (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
                goto mqiobase_exit;

        ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
                        pci_resource_len(ha->pdev, 3));
        if (ha->mqiobase) {
                ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0018,
                    "MQIO Base=%p.\n", ha->mqiobase);
                /* Read MSIX vector size of the board */
                pci_read_config_word(ha->pdev, QLA_PCI_MSIX_CONTROL, &msix);
                ha->msix_count = msix + 1;
                /* Max queues are bounded by available msix vectors */
                /* MB interrupt uses 1 vector */
                ha->max_req_queues = ha->msix_count - 1;
                ha->max_rsp_queues = ha->max_req_queues;
                /* Queue pairs is the max value minus the base queue pair */
                ha->max_qpairs = ha->max_rsp_queues - 1;
                ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0188,
                    "Max no of queues pairs: %d.\n", ha->max_qpairs);

                ql_log_pci(ql_log_info, ha->pdev, 0x001a,
                    "MSI-X vector count: %d.\n", ha->msix_count);
        } else
                ql_log_pci(ql_log_info, ha->pdev, 0x001b,
                    "BAR 3 not enabled.\n");

mqiobase_exit:
        ql_dbg_pci(ql_dbg_init, ha->pdev, 0x001c,
            "MSIX Count: %d.\n", ha->msix_count);
        return (0);

iospace_error_exit:
        return (-ENOMEM);
}


static int
qla83xx_iospace_config(struct qla_hw_data *ha)
{
        uint16_t msix;

        if (pci_request_selected_regions(ha->pdev, ha->bars,
            QLA2XXX_DRIVER_NAME)) {
                ql_log_pci(ql_log_fatal, ha->pdev, 0x0117,
                    "Failed to reserve PIO/MMIO regions (%s), aborting.\n",
                    pci_name(ha->pdev));

                goto iospace_error_exit;
        }

        /* Use MMIO operations for all accesses. */
        if (!(pci_resource_flags(ha->pdev, 0) & IORESOURCE_MEM)) {
                ql_log_pci(ql_log_warn, ha->pdev, 0x0118,
                    "Invalid pci I/O region size (%s).\n",
                    pci_name(ha->pdev));
                goto iospace_error_exit;
        }
        if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) {
                ql_log_pci(ql_log_warn, ha->pdev, 0x0119,
                    "Invalid PCI mem region size (%s), aborting\n",
                        pci_name(ha->pdev));
                goto iospace_error_exit;
        }

        ha->iobase = ioremap(pci_resource_start(ha->pdev, 0), MIN_IOBASE_LEN);
        if (!ha->iobase) {
                ql_log_pci(ql_log_fatal, ha->pdev, 0x011a,
                    "Cannot remap MMIO (%s), aborting.\n",
                    pci_name(ha->pdev));
                goto iospace_error_exit;
        }

        /* 64bit PCI BAR - BAR2 will correspoond to region 4 */
        /* 83XX 26XX always use MQ type access for queues
         * - mbar 2, a.k.a region 4 */
        ha->max_req_queues = ha->max_rsp_queues = 1;
        ha->msix_count = QLA_BASE_VECTORS;
        ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 4),
                        pci_resource_len(ha->pdev, 4));

        if (!ha->mqiobase) {
                ql_log_pci(ql_log_fatal, ha->pdev, 0x011d,
                    "BAR2/region4 not enabled\n");
                goto mqiobase_exit;
        }

        ha->msixbase = ioremap(pci_resource_start(ha->pdev, 2),
                        pci_resource_len(ha->pdev, 2));
        if (ha->msixbase) {
                /* Read MSIX vector size of the board */
                pci_read_config_word(ha->pdev,
                    QLA_83XX_PCI_MSIX_CONTROL, &msix);
                ha->msix_count = (msix & PCI_MSIX_FLAGS_QSIZE)  + 1;
                /*
                 * By default, driver uses at least two msix vectors
                 * (default & rspq)
                 */
                if (ql2xmqsupport || ql2xnvmeenable) {
                        /* MB interrupt uses 1 vector */
                        ha->max_req_queues = ha->msix_count - 1;

                        /* ATIOQ needs 1 vector. That's 1 less QPair */
                        if (QLA_TGT_MODE_ENABLED())
                                ha->max_req_queues--;

                        ha->max_rsp_queues = ha->max_req_queues;

                        /* Queue pairs is the max value minus
                         * the base queue pair */
                        ha->max_qpairs = ha->max_req_queues - 1;
                        ql_dbg_pci(ql_dbg_init, ha->pdev, 0x00e3,
                            "Max no of queues pairs: %d.\n", ha->max_qpairs);
                }
                ql_log_pci(ql_log_info, ha->pdev, 0x011c,
                    "MSI-X vector count: %d.\n", ha->msix_count);
        } else
                ql_log_pci(ql_log_info, ha->pdev, 0x011e,
                    "BAR 1 not enabled.\n");

mqiobase_exit:
        ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011f,
            "MSIX Count: %d.\n", ha->msix_count);
        return 0;

iospace_error_exit:
        return -ENOMEM;
}

static struct isp_operations qla2100_isp_ops = {
        .pci_config             = qla2100_pci_config,
        .reset_chip             = qla2x00_reset_chip,
        .chip_diag              = qla2x00_chip_diag,
        .config_rings           = qla2x00_config_rings,
        .reset_adapter          = qla2x00_reset_adapter,
        .nvram_config           = qla2x00_nvram_config,
        .update_fw_options      = qla2x00_update_fw_options,
        .load_risc              = qla2x00_load_risc,
        .pci_info_str           = qla2x00_pci_info_str,
        .fw_version_str         = qla2x00_fw_version_str,
        .intr_handler           = qla2100_intr_handler,
        .enable_intrs           = qla2x00_enable_intrs,
        .disable_intrs          = qla2x00_disable_intrs,
        .abort_command          = qla2x00_abort_command,
        .target_reset           = qla2x00_abort_target,
        .lun_reset              = qla2x00_lun_reset,
        .fabric_login           = qla2x00_login_fabric,
        .fabric_logout          = qla2x00_fabric_logout,
        .calc_req_entries       = qla2x00_calc_iocbs_32,
        .build_iocbs            = qla2x00_build_scsi_iocbs_32,
        .prep_ms_iocb           = qla2x00_prep_ms_iocb,
        .prep_ms_fdmi_iocb      = qla2x00_prep_ms_fdmi_iocb,
        .read_nvram             = qla2x00_read_nvram_data,
        .write_nvram            = qla2x00_write_nvram_data,
        .fw_dump                = qla2100_fw_dump,
        .beacon_on              = NULL,
        .beacon_off             = NULL,
        .beacon_blink           = NULL,
        .read_optrom            = qla2x00_read_optrom_data,
        .write_optrom           = qla2x00_write_optrom_data,
        .get_flash_version      = qla2x00_get_flash_version,
        .start_scsi             = qla2x00_start_scsi,
        .start_scsi_mq          = NULL,
        .abort_isp              = qla2x00_abort_isp,
        .iospace_config         = qla2x00_iospace_config,
        .initialize_adapter     = qla2x00_initialize_adapter,
};

static struct isp_operations qla2300_isp_ops = {
        .pci_config             = qla2300_pci_config,
        .reset_chip             = qla2x00_reset_chip,
        .chip_diag              = qla2x00_chip_diag,
        .config_rings           = qla2x00_config_rings,
        .reset_adapter          = qla2x00_reset_adapter,
        .nvram_config           = qla2x00_nvram_config,
        .update_fw_options      = qla2x00_update_fw_options,
        .load_risc              = qla2x00_load_risc,
        .pci_info_str           = qla2x00_pci_info_str,
        .fw_version_str         = qla2x00_fw_version_str,
        .intr_handler           = qla2300_intr_handler,
        .enable_intrs           = qla2x00_enable_intrs,
        .disable_intrs          = qla2x00_disable_intrs,
        .abort_command          = qla2x00_abort_command,
        .target_reset           = qla2x00_abort_target,
        .lun_reset              = qla2x00_lun_reset,
        .fabric_login           = qla2x00_login_fabric,
        .fabric_logout          = qla2x00_fabric_logout,
        .calc_req_entries       = qla2x00_calc_iocbs_32,
        .build_iocbs            = qla2x00_build_scsi_iocbs_32,
        .prep_ms_iocb           = qla2x00_prep_ms_iocb,
        .prep_ms_fdmi_iocb      = qla2x00_prep_ms_fdmi_iocb,
        .read_nvram             = qla2x00_read_nvram_data,
        .write_nvram            = qla2x00_write_nvram_data,
        .fw_dump                = qla2300_fw_dump,
        .beacon_on              = qla2x00_beacon_on,
        .beacon_off             = qla2x00_beacon_off,
        .beacon_blink           = qla2x00_beacon_blink,
        .read_optrom            = qla2x00_read_optrom_data,
        .write_optrom           = qla2x00_write_optrom_data,
        .get_flash_version      = qla2x00_get_flash_version,
        .start_scsi             = qla2x00_start_scsi,
        .start_scsi_mq          = NULL,
        .abort_isp              = qla2x00_abort_isp,
        .iospace_config         = qla2x00_iospace_config,
        .initialize_adapter     = qla2x00_initialize_adapter,
};

static struct isp_operations qla24xx_isp_ops = {
        .pci_config             = qla24xx_pci_config,
        .reset_chip             = qla24xx_reset_chip,
        .chip_diag              = qla24xx_chip_diag,
        .config_rings           = qla24xx_config_rings,
        .reset_adapter          = qla24xx_reset_adapter,
        .nvram_config           = qla24xx_nvram_config,
        .update_fw_options      = qla24xx_update_fw_options,
        .load_risc              = qla24xx_load_risc,
        .pci_info_str           = qla24xx_pci_info_str,
        .fw_version_str         = qla24xx_fw_version_str,
        .intr_handler           = qla24xx_intr_handler,
        .enable_intrs           = qla24xx_enable_intrs,
        .disable_intrs          = qla24xx_disable_intrs,
        .abort_command          = qla24xx_abort_command,
        .target_reset           = qla24xx_abort_target,
        .lun_reset              = qla24xx_lun_reset,
        .fabric_login           = qla24xx_login_fabric,
        .fabric_logout          = qla24xx_fabric_logout,
        .calc_req_entries       = NULL,
        .build_iocbs            = NULL,
        .prep_ms_iocb           = qla24xx_prep_ms_iocb,
        .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
        .read_nvram             = qla24xx_read_nvram_data,
        .write_nvram            = qla24xx_write_nvram_data,
        .fw_dump                = qla24xx_fw_dump,
        .beacon_on              = qla24xx_beacon_on,
        .beacon_off             = qla24xx_beacon_off,
        .beacon_blink           = qla24xx_beacon_blink,
        .read_optrom            = qla24xx_read_optrom_data,
        .write_optrom           = qla24xx_write_optrom_data,
        .get_flash_version      = qla24xx_get_flash_version,
        .start_scsi             = qla24xx_start_scsi,
        .start_scsi_mq          = NULL,
        .abort_isp              = qla2x00_abort_isp,
        .iospace_config         = qla2x00_iospace_config,
        .initialize_adapter     = qla2x00_initialize_adapter,
};

static struct isp_operations qla25xx_isp_ops = {
        .pci_config             = qla25xx_pci_config,
        .reset_chip             = qla24xx_reset_chip,
        .chip_diag              = qla24xx_chip_diag,
        .config_rings           = qla24xx_config_rings,
        .reset_adapter          = qla24xx_reset_adapter,
        .nvram_config           = qla24xx_nvram_config,
        .update_fw_options      = qla24xx_update_fw_options,
        .load_risc              = qla24xx_load_risc,
        .pci_info_str           = qla24xx_pci_info_str,
        .fw_version_str         = qla24xx_fw_version_str,
        .intr_handler           = qla24xx_intr_handler,
        .enable_intrs           = qla24xx_enable_intrs,
        .disable_intrs          = qla24xx_disable_intrs,
        .abort_command          = qla24xx_abort_command,
        .target_reset           = qla24xx_abort_target,
        .lun_reset              = qla24xx_lun_reset,
        .fabric_login           = qla24xx_login_fabric,
        .fabric_logout          = qla24xx_fabric_logout,
        .calc_req_entries       = NULL,
        .build_iocbs            = NULL,
        .prep_ms_iocb           = qla24xx_prep_ms_iocb,
        .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
        .read_nvram             = qla25xx_read_nvram_data,
        .write_nvram            = qla25xx_write_nvram_data,
        .fw_dump                = qla25xx_fw_dump,
        .beacon_on              = qla24xx_beacon_on,
        .beacon_off             = qla24xx_beacon_off,
        .beacon_blink           = qla24xx_beacon_blink,
        .read_optrom            = qla25xx_read_optrom_data,
        .write_optrom           = qla24xx_write_optrom_data,
        .get_flash_version      = qla24xx_get_flash_version,
        .start_scsi             = qla24xx_dif_start_scsi,
        .start_scsi_mq          = qla2xxx_dif_start_scsi_mq,
        .abort_isp              = qla2x00_abort_isp,
        .iospace_config         = qla2x00_iospace_config,
        .initialize_adapter     = qla2x00_initialize_adapter,
};

static struct isp_operations qla81xx_isp_ops = {
        .pci_config             = qla25xx_pci_config,
        .reset_chip             = qla24xx_reset_chip,
        .chip_diag              = qla24xx_chip_diag,
        .config_rings           = qla24xx_config_rings,
        .reset_adapter          = qla24xx_reset_adapter,
        .nvram_config           = qla81xx_nvram_config,
        .update_fw_options      = qla24xx_update_fw_options,
        .load_risc              = qla81xx_load_risc,
        .pci_info_str           = qla24xx_pci_info_str,
        .fw_version_str         = qla24xx_fw_version_str,
        .intr_handler           = qla24xx_intr_handler,
        .enable_intrs           = qla24xx_enable_intrs,
        .disable_intrs          = qla24xx_disable_intrs,
        .abort_command          = qla24xx_abort_command,
        .target_reset           = qla24xx_abort_target,
        .lun_reset              = qla24xx_lun_reset,
        .fabric_login           = qla24xx_login_fabric,
        .fabric_logout          = qla24xx_fabric_logout,
        .calc_req_entries       = NULL,
        .build_iocbs            = NULL,
        .prep_ms_iocb           = qla24xx_prep_ms_iocb,
        .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
        .read_nvram             = NULL,
        .write_nvram            = NULL,
        .fw_dump                = qla81xx_fw_dump,
        .beacon_on              = qla24xx_beacon_on,
        .beacon_off             = qla24xx_beacon_off,
        .beacon_blink           = qla83xx_beacon_blink,
        .read_optrom            = qla25xx_read_optrom_data,
        .write_optrom           = qla24xx_write_optrom_data,
        .get_flash_version      = qla24xx_get_flash_version,
        .start_scsi             = qla24xx_dif_start_scsi,
        .start_scsi_mq          = qla2xxx_dif_start_scsi_mq,
        .abort_isp              = qla2x00_abort_isp,
        .iospace_config         = qla2x00_iospace_config,
        .initialize_adapter     = qla2x00_initialize_adapter,
};

static struct isp_operations qla82xx_isp_ops = {
        .pci_config             = qla82xx_pci_config,
        .reset_chip             = qla82xx_reset_chip,
        .chip_diag              = qla24xx_chip_diag,
        .config_rings           = qla82xx_config_rings,
        .reset_adapter          = qla24xx_reset_adapter,
        .nvram_config           = qla81xx_nvram_config,
        .update_fw_options      = qla24xx_update_fw_options,
        .load_risc              = qla82xx_load_risc,
        .pci_info_str           = qla24xx_pci_info_str,
        .fw_version_str         = qla24xx_fw_version_str,
        .intr_handler           = qla82xx_intr_handler,
        .enable_intrs           = qla82xx_enable_intrs,
        .disable_intrs          = qla82xx_disable_intrs,
        .abort_command          = qla24xx_abort_command,
        .target_reset           = qla24xx_abort_target,
        .lun_reset              = qla24xx_lun_reset,
        .fabric_login           = qla24xx_login_fabric,
        .fabric_logout          = qla24xx_fabric_logout,
        .calc_req_entries       = NULL,
        .build_iocbs            = NULL,
        .prep_ms_iocb           = qla24xx_prep_ms_iocb,
        .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
        .read_nvram             = qla24xx_read_nvram_data,
        .write_nvram            = qla24xx_write_nvram_data,
        .fw_dump                = qla82xx_fw_dump,
        .beacon_on              = qla82xx_beacon_on,
        .beacon_off             = qla82xx_beacon_off,
        .beacon_blink           = NULL,
        .read_optrom            = qla82xx_read_optrom_data,
        .write_optrom           = qla82xx_write_optrom_data,
        .get_flash_version      = qla82xx_get_flash_version,
        .start_scsi             = qla82xx_start_scsi,
        .start_scsi_mq          = NULL,
        .abort_isp              = qla82xx_abort_isp,
        .iospace_config         = qla82xx_iospace_config,
        .initialize_adapter     = qla2x00_initialize_adapter,
};

static struct isp_operations qla8044_isp_ops = {
        .pci_config             = qla82xx_pci_config,
        .reset_chip             = qla82xx_reset_chip,
        .chip_diag              = qla24xx_chip_diag,
        .config_rings           = qla82xx_config_rings,
        .reset_adapter          = qla24xx_reset_adapter,
        .nvram_config           = qla81xx_nvram_config,
        .update_fw_options      = qla24xx_update_fw_options,
        .load_risc              = qla82xx_load_risc,
        .pci_info_str           = qla24xx_pci_info_str,
        .fw_version_str         = qla24xx_fw_version_str,
        .intr_handler           = qla8044_intr_handler,
        .enable_intrs           = qla82xx_enable_intrs,
        .disable_intrs          = qla82xx_disable_intrs,
        .abort_command          = qla24xx_abort_command,
        .target_reset           = qla24xx_abort_target,
        .lun_reset              = qla24xx_lun_reset,
        .fabric_login           = qla24xx_login_fabric,
        .fabric_logout          = qla24xx_fabric_logout,
        .calc_req_entries       = NULL,
        .build_iocbs            = NULL,
        .prep_ms_iocb           = qla24xx_prep_ms_iocb,
        .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
        .read_nvram             = NULL,
        .write_nvram            = NULL,
        .fw_dump                = qla8044_fw_dump,
        .beacon_on              = qla82xx_beacon_on,
        .beacon_off             = qla82xx_beacon_off,
        .beacon_blink           = NULL,
        .read_optrom            = qla8044_read_optrom_data,
        .write_optrom           = qla8044_write_optrom_data,
        .get_flash_version      = qla82xx_get_flash_version,
        .start_scsi             = qla82xx_start_scsi,
        .start_scsi_mq          = NULL,
        .abort_isp              = qla8044_abort_isp,
        .iospace_config         = qla82xx_iospace_config,
        .initialize_adapter     = qla2x00_initialize_adapter,
};

static struct isp_operations qla83xx_isp_ops = {
        .pci_config             = qla25xx_pci_config,
        .reset_chip             = qla24xx_reset_chip,
        .chip_diag              = qla24xx_chip_diag,
        .config_rings           = qla24xx_config_rings,
        .reset_adapter          = qla24xx_reset_adapter,
        .nvram_config           = qla81xx_nvram_config,
        .update_fw_options      = qla24xx_update_fw_options,
        .load_risc              = qla81xx_load_risc,
        .pci_info_str           = qla24xx_pci_info_str,
        .fw_version_str         = qla24xx_fw_version_str,
        .intr_handler           = qla24xx_intr_handler,
        .enable_intrs           = qla24xx_enable_intrs,
        .disable_intrs          = qla24xx_disable_intrs,
        .abort_command          = qla24xx_abort_command,
        .target_reset           = qla24xx_abort_target,
        .lun_reset              = qla24xx_lun_reset,
        .fabric_login           = qla24xx_login_fabric,
        .fabric_logout          = qla24xx_fabric_logout,
        .calc_req_entries       = NULL,
        .build_iocbs            = NULL,
        .prep_ms_iocb           = qla24xx_prep_ms_iocb,
        .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
        .read_nvram             = NULL,
        .write_nvram            = NULL,
        .fw_dump                = qla83xx_fw_dump,
        .beacon_on              = qla24xx_beacon_on,
        .beacon_off             = qla24xx_beacon_off,
        .beacon_blink           = qla83xx_beacon_blink,
        .read_optrom            = qla25xx_read_optrom_data,
        .write_optrom           = qla24xx_write_optrom_data,
        .get_flash_version      = qla24xx_get_flash_version,
        .start_scsi             = qla24xx_dif_start_scsi,
        .start_scsi_mq          = qla2xxx_dif_start_scsi_mq,
        .abort_isp              = qla2x00_abort_isp,
        .iospace_config         = qla83xx_iospace_config,
        .initialize_adapter     = qla2x00_initialize_adapter,
};

static struct isp_operations qlafx00_isp_ops = {
        .pci_config             = qlafx00_pci_config,
        .reset_chip             = qlafx00_soft_reset,
        .chip_diag              = qlafx00_chip_diag,
        .config_rings           = qlafx00_config_rings,
        .reset_adapter          = qlafx00_soft_reset,
        .nvram_config           = NULL,
        .update_fw_options      = NULL,
        .load_risc              = NULL,
        .pci_info_str           = qlafx00_pci_info_str,
        .fw_version_str         = qlafx00_fw_version_str,
        .intr_handler           = qlafx00_intr_handler,
        .enable_intrs           = qlafx00_enable_intrs,
        .disable_intrs          = qlafx00_disable_intrs,
        .abort_command          = qla24xx_async_abort_command,
        .target_reset           = qlafx00_abort_target,
        .lun_reset              = qlafx00_lun_reset,
        .fabric_login           = NULL,
        .fabric_logout          = NULL,
        .calc_req_entries       = NULL,
        .build_iocbs            = NULL,
        .prep_ms_iocb           = qla24xx_prep_ms_iocb,
        .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
        .read_nvram             = qla24xx_read_nvram_data,
        .write_nvram            = qla24xx_write_nvram_data,
        .fw_dump                = NULL,
        .beacon_on              = qla24xx_beacon_on,
        .beacon_off             = qla24xx_beacon_off,
        .beacon_blink           = NULL,
        .read_optrom            = qla24xx_read_optrom_data,
        .write_optrom           = qla24xx_write_optrom_data,
        .get_flash_version      = qla24xx_get_flash_version,
        .start_scsi             = qlafx00_start_scsi,
        .start_scsi_mq          = NULL,
        .abort_isp              = qlafx00_abort_isp,
        .iospace_config         = qlafx00_iospace_config,
        .initialize_adapter     = qlafx00_initialize_adapter,
};

static struct isp_operations qla27xx_isp_ops = {
        .pci_config             = qla25xx_pci_config,
        .reset_chip             = qla24xx_reset_chip,
        .chip_diag              = qla24xx_chip_diag,
        .config_rings           = qla24xx_config_rings,
        .reset_adapter          = qla24xx_reset_adapter,
        .nvram_config           = qla81xx_nvram_config,
        .update_fw_options      = qla24xx_update_fw_options,
        .load_risc              = qla81xx_load_risc,
        .pci_info_str           = qla24xx_pci_info_str,
        .fw_version_str         = qla24xx_fw_version_str,
        .intr_handler           = qla24xx_intr_handler,
        .enable_intrs           = qla24xx_enable_intrs,
        .disable_intrs          = qla24xx_disable_intrs,
        .abort_command          = qla24xx_abort_command,
        .target_reset           = qla24xx_abort_target,
        .lun_reset              = qla24xx_lun_reset,
        .fabric_login           = qla24xx_login_fabric,
        .fabric_logout          = qla24xx_fabric_logout,
        .calc_req_entries       = NULL,
        .build_iocbs            = NULL,
        .prep_ms_iocb           = qla24xx_prep_ms_iocb,
        .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
        .read_nvram             = NULL,
        .write_nvram            = NULL,
        .fw_dump                = qla27xx_fwdump,
        .mpi_fw_dump            = qla27xx_mpi_fwdump,
        .beacon_on              = qla24xx_beacon_on,
        .beacon_off             = qla24xx_beacon_off,
        .beacon_blink           = qla83xx_beacon_blink,
        .read_optrom            = qla25xx_read_optrom_data,
        .write_optrom           = qla24xx_write_optrom_data,
        .get_flash_version      = qla24xx_get_flash_version,
        .start_scsi             = qla24xx_dif_start_scsi,
        .start_scsi_mq          = qla2xxx_dif_start_scsi_mq,
        .abort_isp              = qla2x00_abort_isp,
        .iospace_config         = qla83xx_iospace_config,
        .initialize_adapter     = qla2x00_initialize_adapter,
};

static inline void
qla2x00_set_isp_flags(struct qla_hw_data *ha)
{
        ha->device_type = DT_EXTENDED_IDS;
        switch (ha->pdev->device) {
        case PCI_DEVICE_ID_QLOGIC_ISP2100:
                ha->isp_type |= DT_ISP2100;
                ha->device_type &= ~DT_EXTENDED_IDS;
                ha->fw_srisc_address = RISC_START_ADDRESS_2100;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2200:
                ha->isp_type |= DT_ISP2200;
                ha->device_type &= ~DT_EXTENDED_IDS;
                ha->fw_srisc_address = RISC_START_ADDRESS_2100;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2300:
                ha->isp_type |= DT_ISP2300;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->fw_srisc_address = RISC_START_ADDRESS_2300;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2312:
                ha->isp_type |= DT_ISP2312;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->fw_srisc_address = RISC_START_ADDRESS_2300;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2322:
                ha->isp_type |= DT_ISP2322;
                ha->device_type |= DT_ZIO_SUPPORTED;
                if (ha->pdev->subsystem_vendor == 0x1028 &&
                    ha->pdev->subsystem_device == 0x0170)
                        ha->device_type |= DT_OEM_001;
                ha->fw_srisc_address = RISC_START_ADDRESS_2300;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP6312:
                ha->isp_type |= DT_ISP6312;
                ha->fw_srisc_address = RISC_START_ADDRESS_2300;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP6322:
                ha->isp_type |= DT_ISP6322;
                ha->fw_srisc_address = RISC_START_ADDRESS_2300;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2422:
                ha->isp_type |= DT_ISP2422;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2432:
                ha->isp_type |= DT_ISP2432;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP8432:
                ha->isp_type |= DT_ISP8432;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP5422:
                ha->isp_type |= DT_ISP5422;
                ha->device_type |= DT_FWI2;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP5432:
                ha->isp_type |= DT_ISP5432;
                ha->device_type |= DT_FWI2;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2532:
                ha->isp_type |= DT_ISP2532;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP8001:
                ha->isp_type |= DT_ISP8001;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP8021:
                ha->isp_type |= DT_ISP8021;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                /* Initialize 82XX ISP flags */
                qla82xx_init_flags(ha);
                break;
         case PCI_DEVICE_ID_QLOGIC_ISP8044:
                ha->isp_type |= DT_ISP8044;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                /* Initialize 82XX ISP flags */
                qla82xx_init_flags(ha);
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2031:
                ha->isp_type |= DT_ISP2031;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->device_type |= DT_T10_PI;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP8031:
                ha->isp_type |= DT_ISP8031;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->device_type |= DT_T10_PI;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISPF001:
                ha->isp_type |= DT_ISPFX00;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2071:
                ha->isp_type |= DT_ISP2071;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->device_type |= DT_T10_PI;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2271:
                ha->isp_type |= DT_ISP2271;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->device_type |= DT_T10_PI;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2261:
                ha->isp_type |= DT_ISP2261;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->device_type |= DT_T10_PI;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2081:
        case PCI_DEVICE_ID_QLOGIC_ISP2089:
                ha->isp_type |= DT_ISP2081;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->device_type |= DT_T10_PI;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        case PCI_DEVICE_ID_QLOGIC_ISP2281:
        case PCI_DEVICE_ID_QLOGIC_ISP2289:
                ha->isp_type |= DT_ISP2281;
                ha->device_type |= DT_ZIO_SUPPORTED;
                ha->device_type |= DT_FWI2;
                ha->device_type |= DT_IIDMA;
                ha->device_type |= DT_T10_PI;
                ha->fw_srisc_address = RISC_START_ADDRESS_2400;
                break;
        }

        if (IS_QLA82XX(ha))
                ha->port_no = ha->portnum & 1;
        else {
                /* Get adapter physical port no from interrupt pin register. */
                pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no);
                if (IS_QLA25XX(ha) || IS_QLA2031(ha) ||
                    IS_QLA27XX(ha) || IS_QLA28XX(ha))
                        ha->port_no--;
                else
                        ha->port_no = !(ha->port_no & 1);
        }

        ql_dbg_pci(ql_dbg_init, ha->pdev, 0x000b,
            "device_type=0x%x port=%d fw_srisc_address=0x%x.\n",
            ha->device_type, ha->port_no, ha->fw_srisc_address);
}

static void
qla2xxx_scan_start(struct Scsi_Host *shost)
{
        scsi_qla_host_t *vha = shost_priv(shost);

        if (vha->hw->flags.running_gold_fw)
                return;

        set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
        set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
        set_bit(RSCN_UPDATE, &vha->dpc_flags);
        set_bit(NPIV_CONFIG_NEEDED, &vha->dpc_flags);
}

static int
qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
        scsi_qla_host_t *vha = shost_priv(shost);

        if (test_bit(UNLOADING, &vha->dpc_flags))
                return 1;
        if (!vha->host)
                return 1;
        if (time > vha->hw->loop_reset_delay * HZ)
                return 1;

        return atomic_read(&vha->loop_state) == LOOP_READY;
}

static void qla2x00_iocb_work_fn(struct work_struct *work)
{
        struct scsi_qla_host *vha = container_of(work,
                struct scsi_qla_host, iocb_work);
        struct qla_hw_data *ha = vha->hw;
        struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
        int i = 2;
        unsigned long flags;

        if (test_bit(UNLOADING, &base_vha->dpc_flags))
                return;

        while (!list_empty(&vha->work_list) && i > 0) {
                qla2x00_do_work(vha);
                i--;
        }

        spin_lock_irqsave(&vha->work_lock, flags);
        clear_bit(IOCB_WORK_ACTIVE, &vha->dpc_flags);
        spin_unlock_irqrestore(&vha->work_lock, flags);
}

/*
 * PCI driver interface
 */
static int
qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
        int     ret = -ENODEV;
        struct Scsi_Host *host;
        scsi_qla_host_t *base_vha = NULL;
        struct qla_hw_data *ha;
        char pci_info[30];
        char fw_str[30], wq_name[30];
        struct scsi_host_template *sht;
        int bars, mem_only = 0;
        uint16_t req_length = 0, rsp_length = 0;
        struct req_que *req = NULL;
        struct rsp_que *rsp = NULL;
        int i;

        bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
        sht = &qla2xxx_driver_template;
        if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8432 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8001 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8021 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2031 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8031 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISPF001 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8044 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2071 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2271 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2261 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2081 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2281 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2089 ||
            pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2289) {
                bars = pci_select_bars(pdev, IORESOURCE_MEM);
                mem_only = 1;
                ql_dbg_pci(ql_dbg_init, pdev, 0x0007,
                    "Mem only adapter.\n");
        }
        ql_dbg_pci(ql_dbg_init, pdev, 0x0008,
            "Bars=%d.\n", bars);

        if (mem_only) {
                if (pci_enable_device_mem(pdev))
                        return ret;
        } else {
                if (pci_enable_device(pdev))
                        return ret;
        }

        if (is_kdump_kernel()) {
                ql2xmqsupport = 0;
                ql2xallocfwdump = 0;
        }

        /* This may fail but that's ok */
        pci_enable_pcie_error_reporting(pdev);

        ha = kzalloc(sizeof(struct qla_hw_data), GFP_KERNEL);
        if (!ha) {
                ql_log_pci(ql_log_fatal, pdev, 0x0009,
                    "Unable to allocate memory for ha.\n");
                goto disable_device;
        }
        ql_dbg_pci(ql_dbg_init, pdev, 0x000a,
            "Memory allocated for ha=%p.\n", ha);
        ha->pdev = pdev;
        INIT_LIST_HEAD(&ha->tgt.q_full_list);
        spin_lock_init(&ha->tgt.q_full_lock);
        spin_lock_init(&ha->tgt.sess_lock);
        spin_lock_init(&ha->tgt.atio_lock);

        spin_lock_init(&ha->sadb_lock);
        INIT_LIST_HEAD(&ha->sadb_tx_index_list);
        INIT_LIST_HEAD(&ha->sadb_rx_index_list);

        spin_lock_init(&ha->sadb_fp_lock);

        if (qla_edif_sadb_build_free_pool(ha)) {
                kfree(ha);
                goto  disable_device;
        }

        atomic_set(&ha->nvme_active_aen_cnt, 0);

        /* Clear our data area */
        ha->bars = bars;
        ha->mem_only = mem_only;
        spin_lock_init(&ha->hardware_lock);
        spin_lock_init(&ha->vport_slock);
        mutex_init(&ha->selflogin_lock);
        mutex_init(&ha->optrom_mutex);

        /* Set ISP-type information. */
        qla2x00_set_isp_flags(ha);

        /* Set EEH reset type to fundamental if required by hba */
        if (IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha) ||
            IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
                pdev->needs_freset = 1;

        ha->prev_topology = 0;
        ha->init_cb_size = sizeof(init_cb_t);
        ha->link_data_rate = PORT_SPEED_UNKNOWN;
        ha->optrom_size = OPTROM_SIZE_2300;
        ha->max_exchg = FW_MAX_EXCHANGES_CNT;
        atomic_set(&ha->num_pend_mbx_stage1, 0);
        atomic_set(&ha->num_pend_mbx_stage2, 0);
        atomic_set(&ha->num_pend_mbx_stage3, 0);
        atomic_set(&ha->zio_threshold, DEFAULT_ZIO_THRESHOLD);
        ha->last_zio_threshold = DEFAULT_ZIO_THRESHOLD;

        /* Assign ISP specific operations. */
        if (IS_QLA2100(ha)) {
                ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100;
                ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
                req_length = REQUEST_ENTRY_CNT_2100;
                rsp_length = RESPONSE_ENTRY_CNT_2100;
                ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
                ha->gid_list_info_size = 4;
                ha->flash_conf_off = ~0;
                ha->flash_data_off = ~0;
                ha->nvram_conf_off = ~0;
                ha->nvram_data_off = ~0;
                ha->isp_ops = &qla2100_isp_ops;
        } else if (IS_QLA2200(ha)) {
                ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100;
                ha->mbx_count = MAILBOX_REGISTER_COUNT_2200;
                req_length = REQUEST_ENTRY_CNT_2200;
                rsp_length = RESPONSE_ENTRY_CNT_2100;
                ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
                ha->gid_list_info_size = 4;
                ha->flash_conf_off = ~0;
                ha->flash_data_off = ~0;
                ha->nvram_conf_off = ~0;
                ha->nvram_data_off = ~0;
                ha->isp_ops = &qla2100_isp_ops;
        } else if (IS_QLA23XX(ha)) {
                ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100;
                ha->mbx_count = MAILBOX_REGISTER_COUNT;
                req_length = REQUEST_ENTRY_CNT_2200;
                rsp_length = RESPONSE_ENTRY_CNT_2300;
                ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
                ha->gid_list_info_size = 6;
                if (IS_QLA2322(ha) || IS_QLA6322(ha))
                        ha->optrom_size = OPTROM_SIZE_2322;
                ha->flash_conf_off = ~0;
                ha->flash_data_off = ~0;
                ha->nvram_conf_off = ~0;
                ha->nvram_data_off = ~0;
                ha->isp_ops = &qla2300_isp_ops;
        } else if (IS_QLA24XX_TYPE(ha)) {
                ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
                ha->mbx_count = MAILBOX_REGISTER_COUNT;
                req_length = REQUEST_ENTRY_CNT_24XX;
                rsp_length = RESPONSE_ENTRY_CNT_2300;
                ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
                ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
                ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
                ha->gid_list_info_size = 8;
                ha->optrom_size = OPTROM_SIZE_24XX;
                ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA24XX;
                ha->isp_ops = &qla24xx_isp_ops;
                ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
                ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
                ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
                ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
        } else if (IS_QLA25XX(ha)) {
                ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
                ha->mbx_count = MAILBOX_REGISTER_COUNT;
                req_length = REQUEST_ENTRY_CNT_24XX;
                rsp_length = RESPONSE_ENTRY_CNT_2300;
                ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
                ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
                ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
                ha->gid_list_info_size = 8;