linux/drivers/target/target_core_xcopy.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*******************************************************************************
   3 * Filename: target_core_xcopy.c
   4 *
   5 * This file contains support for SPC-4 Extended-Copy offload with generic
   6 * TCM backends.
   7 *
   8 * Copyright (c) 2011-2013 Datera, Inc. All rights reserved.
   9 *
  10 * Author:
  11 * Nicholas A. Bellinger <nab@daterainc.com>
  12 *
  13 ******************************************************************************/
  14
  15#include <linux/slab.h>
  16#include <linux/spinlock.h>
  17#include <linux/list.h>
  18#include <linux/configfs.h>
  19#include <linux/ratelimit.h>
  20#include <scsi/scsi_proto.h>
  21#include <asm/unaligned.h>
  22
  23#include <target/target_core_base.h>
  24#include <target/target_core_backend.h>
  25#include <target/target_core_fabric.h>
  26
  27#include "target_core_internal.h"
  28#include "target_core_pr.h"
  29#include "target_core_ua.h"
  30#include "target_core_xcopy.h"
  31
  32static struct workqueue_struct *xcopy_wq = NULL;
  33
  34static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop);
  35
  36/**
  37 * target_xcopy_locate_se_dev_e4_iter - compare XCOPY NAA device identifiers
  38 *
  39 * @se_dev: device being considered for match
  40 * @dev_wwn: XCOPY requested NAA dev_wwn
  41 * @return: 1 on match, 0 on no-match
  42 */
  43static int target_xcopy_locate_se_dev_e4_iter(struct se_device *se_dev,
  44                                              const unsigned char *dev_wwn)
  45{
  46        unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN];
  47        int rc;
  48
  49        if (!se_dev->dev_attrib.emulate_3pc) {
  50                pr_debug("XCOPY: emulate_3pc disabled on se_dev %p\n", se_dev);
  51                return 0;
  52        }
  53
  54        memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN);
  55        spc_gen_naa_6h_vendor_specific(se_dev, &tmp_dev_wwn[0]);
  56
  57        rc = memcmp(&tmp_dev_wwn[0], dev_wwn, XCOPY_NAA_IEEE_REGEX_LEN);
  58        if (rc != 0) {
  59                pr_debug("XCOPY: skip non-matching: %*ph\n",
  60                         XCOPY_NAA_IEEE_REGEX_LEN, tmp_dev_wwn);
  61                return 0;
  62        }
  63        pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev);
  64
  65        return 1;
  66}
  67
  68static int target_xcopy_locate_se_dev_e4(struct se_session *sess,
  69                                        const unsigned char *dev_wwn,
  70                                        struct se_device **_found_dev,
  71                                        struct percpu_ref **_found_lun_ref)
  72{
  73        struct se_dev_entry *deve;
  74        struct se_node_acl *nacl;
  75        struct se_lun *this_lun = NULL;
  76        struct se_device *found_dev = NULL;
  77
  78        /* cmd with NULL sess indicates no associated $FABRIC_MOD */
  79        if (!sess)
  80                goto err_out;
  81
  82        pr_debug("XCOPY 0xe4: searching for: %*ph\n",
  83                 XCOPY_NAA_IEEE_REGEX_LEN, dev_wwn);
  84
  85        nacl = sess->se_node_acl;
  86        rcu_read_lock();
  87        hlist_for_each_entry_rcu(deve, &nacl->lun_entry_hlist, link) {
  88                struct se_device *this_dev;
  89                int rc;
  90
  91                this_lun = rcu_dereference(deve->se_lun);
  92                this_dev = rcu_dereference_raw(this_lun->lun_se_dev);
  93
  94                rc = target_xcopy_locate_se_dev_e4_iter(this_dev, dev_wwn);
  95                if (rc) {
  96                        if (percpu_ref_tryget_live(&this_lun->lun_ref))
  97                                found_dev = this_dev;
  98                        break;
  99                }
 100        }
 101        rcu_read_unlock();
 102        if (found_dev == NULL)
 103                goto err_out;
 104
 105        pr_debug("lun_ref held for se_dev: %p se_dev->se_dev_group: %p\n",
 106                 found_dev, &found_dev->dev_group);
 107        *_found_dev = found_dev;
 108        *_found_lun_ref = &this_lun->lun_ref;
 109        return 0;
 110err_out:
 111        pr_debug_ratelimited("Unable to locate 0xe4 descriptor for EXTENDED_COPY\n");
 112        return -EINVAL;
 113}
 114
 115static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op *xop,
 116                                unsigned char *p, unsigned short cscd_index)
 117{
 118        unsigned char *desc = p;
 119        unsigned short ript;
 120        u8 desig_len;
 121        /*
 122         * Extract RELATIVE INITIATOR PORT IDENTIFIER
 123         */
 124        ript = get_unaligned_be16(&desc[2]);
 125        pr_debug("XCOPY 0xe4: RELATIVE INITIATOR PORT IDENTIFIER: %hu\n", ript);
 126        /*
 127         * Check for supported code set, association, and designator type
 128         */
 129        if ((desc[4] & 0x0f) != 0x1) {
 130                pr_err("XCOPY 0xe4: code set of non binary type not supported\n");
 131                return -EINVAL;
 132        }
 133        if ((desc[5] & 0x30) != 0x00) {
 134                pr_err("XCOPY 0xe4: association other than LUN not supported\n");
 135                return -EINVAL;
 136        }
 137        if ((desc[5] & 0x0f) != 0x3) {
 138                pr_err("XCOPY 0xe4: designator type unsupported: 0x%02x\n",
 139                                (desc[5] & 0x0f));
 140                return -EINVAL;
 141        }
 142        /*
 143         * Check for matching 16 byte length for NAA IEEE Registered Extended
 144         * Assigned designator
 145         */
 146        desig_len = desc[7];
 147        if (desig_len != XCOPY_NAA_IEEE_REGEX_LEN) {
 148                pr_err("XCOPY 0xe4: invalid desig_len: %d\n", (int)desig_len);
 149                return -EINVAL;
 150        }
 151        pr_debug("XCOPY 0xe4: desig_len: %d\n", (int)desig_len);
 152        /*
 153         * Check for NAA IEEE Registered Extended Assigned header..
 154         */
 155        if ((desc[8] & 0xf0) != 0x60) {
 156                pr_err("XCOPY 0xe4: Unsupported DESIGNATOR TYPE: 0x%02x\n",
 157                                        (desc[8] & 0xf0));
 158                return -EINVAL;
 159        }
 160
 161        if (cscd_index != xop->stdi && cscd_index != xop->dtdi) {
 162                pr_debug("XCOPY 0xe4: ignoring CSCD entry %d - neither src nor "
 163                         "dest\n", cscd_index);
 164                return 0;
 165        }
 166
 167        if (cscd_index == xop->stdi) {
 168                memcpy(&xop->src_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN);
 169                /*
 170                 * Determine if the source designator matches the local device
 171                 */
 172                if (!memcmp(&xop->local_dev_wwn[0], &xop->src_tid_wwn[0],
 173                                XCOPY_NAA_IEEE_REGEX_LEN)) {
 174                        xop->op_origin = XCOL_SOURCE_RECV_OP;
 175                        xop->src_dev = se_cmd->se_dev;
 176                        pr_debug("XCOPY 0xe4: Set xop->src_dev %p from source"
 177                                        " received xop\n", xop->src_dev);
 178                }
 179        }
 180
 181        if (cscd_index == xop->dtdi) {
 182                memcpy(&xop->dst_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN);
 183                /*
 184                 * Determine if the destination designator matches the local
 185                 * device. If @cscd_index corresponds to both source (stdi) and
 186                 * destination (dtdi), or dtdi comes after stdi, then
 187                 * XCOL_DEST_RECV_OP wins.
 188                 */
 189                if (!memcmp(&xop->local_dev_wwn[0], &xop->dst_tid_wwn[0],
 190                                XCOPY_NAA_IEEE_REGEX_LEN)) {
 191                        xop->op_origin = XCOL_DEST_RECV_OP;
 192                        xop->dst_dev = se_cmd->se_dev;
 193                        pr_debug("XCOPY 0xe4: Set xop->dst_dev: %p from destination"
 194                                " received xop\n", xop->dst_dev);
 195                }
 196        }
 197
 198        return 0;
 199}
 200
 201static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd,
 202                                struct xcopy_op *xop, unsigned char *p,
 203                                unsigned short tdll, sense_reason_t *sense_ret)
 204{
 205        struct se_device *local_dev = se_cmd->se_dev;
 206        unsigned char *desc = p;
 207        int offset = tdll % XCOPY_TARGET_DESC_LEN, rc;
 208        unsigned short cscd_index = 0;
 209        unsigned short start = 0;
 210
 211        *sense_ret = TCM_INVALID_PARAMETER_LIST;
 212
 213        if (offset != 0) {
 214                pr_err("XCOPY target descriptor list length is not"
 215                        " multiple of %d\n", XCOPY_TARGET_DESC_LEN);
 216                *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE;
 217                return -EINVAL;
 218        }
 219        if (tdll > RCR_OP_MAX_TARGET_DESC_COUNT * XCOPY_TARGET_DESC_LEN) {
 220                pr_err("XCOPY target descriptor supports a maximum"
 221                        " two src/dest descriptors, tdll: %hu too large..\n", tdll);
 222                /* spc4r37 6.4.3.4 CSCD DESCRIPTOR LIST LENGTH field */
 223                *sense_ret = TCM_TOO_MANY_TARGET_DESCS;
 224                return -EINVAL;
 225        }
 226        /*
 227         * Generate an IEEE Registered Extended designator based upon the
 228         * se_device the XCOPY was received upon..
 229         */
 230        memset(&xop->local_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN);
 231        spc_gen_naa_6h_vendor_specific(local_dev, &xop->local_dev_wwn[0]);
 232
 233        while (start < tdll) {
 234                /*
 235                 * Check target descriptor identification with 0xE4 type, and
 236                 * compare the current index with the CSCD descriptor IDs in
 237                 * the segment descriptor. Use VPD 0x83 WWPN matching ..
 238                 */
 239                switch (desc[0]) {
 240                case 0xe4:
 241                        rc = target_xcopy_parse_tiddesc_e4(se_cmd, xop,
 242                                                        &desc[0], cscd_index);
 243                        if (rc != 0)
 244                                goto out;
 245                        start += XCOPY_TARGET_DESC_LEN;
 246                        desc += XCOPY_TARGET_DESC_LEN;
 247                        cscd_index++;
 248                        break;
 249                default:
 250                        pr_err("XCOPY unsupported descriptor type code:"
 251                                        " 0x%02x\n", desc[0]);
 252                        *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE;
 253                        goto out;
 254                }
 255        }
 256
 257        switch (xop->op_origin) {
 258        case XCOL_SOURCE_RECV_OP:
 259                rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess,
 260                                                xop->dst_tid_wwn,
 261                                                &xop->dst_dev,
 262                                                &xop->remote_lun_ref);
 263                break;
 264        case XCOL_DEST_RECV_OP:
 265                rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess,
 266                                                xop->src_tid_wwn,
 267                                                &xop->src_dev,
 268                                                &xop->remote_lun_ref);
 269                break;
 270        default:
 271                pr_err("XCOPY CSCD descriptor IDs not found in CSCD list - "
 272                        "stdi: %hu dtdi: %hu\n", xop->stdi, xop->dtdi);
 273                rc = -EINVAL;
 274                break;
 275        }
 276        /*
 277         * If a matching IEEE NAA 0x83 descriptor for the requested device
 278         * is not located on this node, return COPY_ABORTED with ASQ/ASQC
 279         * 0x0d/0x02 - COPY_TARGET_DEVICE_NOT_REACHABLE to request the
 280         * initiator to fall back to normal copy method.
 281         */
 282        if (rc < 0) {
 283                *sense_ret = TCM_COPY_TARGET_DEVICE_NOT_REACHABLE;
 284                goto out;
 285        }
 286
 287        pr_debug("XCOPY TGT desc: Source dev: %p NAA IEEE WWN: 0x%16phN\n",
 288                 xop->src_dev, &xop->src_tid_wwn[0]);
 289        pr_debug("XCOPY TGT desc: Dest dev: %p NAA IEEE WWN: 0x%16phN\n",
 290                 xop->dst_dev, &xop->dst_tid_wwn[0]);
 291
 292        return cscd_index;
 293
 294out:
 295        return -EINVAL;
 296}
 297
 298static int target_xcopy_parse_segdesc_02(struct se_cmd *se_cmd, struct xcopy_op *xop,
 299                                        unsigned char *p)
 300{
 301        unsigned char *desc = p;
 302        int dc = (desc[1] & 0x02);
 303        unsigned short desc_len;
 304
 305        desc_len = get_unaligned_be16(&desc[2]);
 306        if (desc_len != 0x18) {
 307                pr_err("XCOPY segment desc 0x02: Illegal desc_len:"
 308                                " %hu\n", desc_len);
 309                return -EINVAL;
 310        }
 311
 312        xop->stdi = get_unaligned_be16(&desc[4]);
 313        xop->dtdi = get_unaligned_be16(&desc[6]);
 314
 315        if (xop->stdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX ||
 316            xop->dtdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX) {
 317                pr_err("XCOPY segment desc 0x02: unsupported CSCD ID > 0x%x; stdi: %hu dtdi: %hu\n",
 318                        XCOPY_CSCD_DESC_ID_LIST_OFF_MAX, xop->stdi, xop->dtdi);
 319                return -EINVAL;
 320        }
 321
 322        pr_debug("XCOPY seg desc 0x02: desc_len: %hu stdi: %hu dtdi: %hu, DC: %d\n",
 323                desc_len, xop->stdi, xop->dtdi, dc);
 324
 325        xop->nolb = get_unaligned_be16(&desc[10]);
 326        xop->src_lba = get_unaligned_be64(&desc[12]);
 327        xop->dst_lba = get_unaligned_be64(&desc[20]);
 328        pr_debug("XCOPY seg desc 0x02: nolb: %hu src_lba: %llu dst_lba: %llu\n",
 329                xop->nolb, (unsigned long long)xop->src_lba,
 330                (unsigned long long)xop->dst_lba);
 331
 332        return 0;
 333}
 334
 335static int target_xcopy_parse_segment_descriptors(struct se_cmd *se_cmd,
 336                                struct xcopy_op *xop, unsigned char *p,
 337                                unsigned int sdll, sense_reason_t *sense_ret)
 338{
 339        unsigned char *desc = p;
 340        unsigned int start = 0;
 341        int offset = sdll % XCOPY_SEGMENT_DESC_LEN, rc, ret = 0;
 342
 343        *sense_ret = TCM_INVALID_PARAMETER_LIST;
 344
 345        if (offset != 0) {
 346                pr_err("XCOPY segment descriptor list length is not"
 347                        " multiple of %d\n", XCOPY_SEGMENT_DESC_LEN);
 348                *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE;
 349                return -EINVAL;
 350        }
 351        if (sdll > RCR_OP_MAX_SG_DESC_COUNT * XCOPY_SEGMENT_DESC_LEN) {
 352                pr_err("XCOPY supports %u segment descriptor(s), sdll: %u too"
 353                        " large..\n", RCR_OP_MAX_SG_DESC_COUNT, sdll);
 354                /* spc4r37 6.4.3.5 SEGMENT DESCRIPTOR LIST LENGTH field */
 355                *sense_ret = TCM_TOO_MANY_SEGMENT_DESCS;
 356                return -EINVAL;
 357        }
 358
 359        while (start < sdll) {
 360                /*
 361                 * Check segment descriptor type code for block -> block
 362                 */
 363                switch (desc[0]) {
 364                case 0x02:
 365                        rc = target_xcopy_parse_segdesc_02(se_cmd, xop, desc);
 366                        if (rc < 0)
 367                                goto out;
 368
 369                        ret++;
 370                        start += XCOPY_SEGMENT_DESC_LEN;
 371                        desc += XCOPY_SEGMENT_DESC_LEN;
 372                        break;
 373                default:
 374                        pr_err("XCOPY unsupported segment descriptor"
 375                                "type: 0x%02x\n", desc[0]);
 376                        *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE;
 377                        goto out;
 378                }
 379        }
 380
 381        return ret;
 382
 383out:
 384        return -EINVAL;
 385}
 386
 387/*
 388 * Start xcopy_pt ops
 389 */
 390
 391struct xcopy_pt_cmd {
 392        struct se_cmd se_cmd;
 393        struct completion xpt_passthrough_sem;
 394        unsigned char sense_buffer[TRANSPORT_SENSE_BUFFER];
 395};
 396
 397struct se_portal_group xcopy_pt_tpg;
 398static struct se_session xcopy_pt_sess;
 399static struct se_node_acl xcopy_pt_nacl;
 400
 401static int xcopy_pt_get_cmd_state(struct se_cmd *se_cmd)
 402{
 403        return 0;
 404}
 405
 406static void xcopy_pt_undepend_remotedev(struct xcopy_op *xop)
 407{
 408        if (xop->op_origin == XCOL_SOURCE_RECV_OP)
 409                pr_debug("putting dst lun_ref for %p\n", xop->dst_dev);
 410        else
 411                pr_debug("putting src lun_ref for %p\n", xop->src_dev);
 412
 413        percpu_ref_put(xop->remote_lun_ref);
 414}
 415
 416static void xcopy_pt_release_cmd(struct se_cmd *se_cmd)
 417{
 418        struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd,
 419                                struct xcopy_pt_cmd, se_cmd);
 420
 421        /* xpt_cmd is on the stack, nothing to free here */
 422        pr_debug("xpt_cmd done: %p\n", xpt_cmd);
 423}
 424
 425static int xcopy_pt_check_stop_free(struct se_cmd *se_cmd)
 426{
 427        struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd,
 428                                struct xcopy_pt_cmd, se_cmd);
 429
 430        complete(&xpt_cmd->xpt_passthrough_sem);
 431        return 0;
 432}
 433
 434static int xcopy_pt_write_pending(struct se_cmd *se_cmd)
 435{
 436        return 0;
 437}
 438
 439static int xcopy_pt_queue_data_in(struct se_cmd *se_cmd)
 440{
 441        return 0;
 442}
 443
 444static int xcopy_pt_queue_status(struct se_cmd *se_cmd)
 445{
 446        return 0;
 447}
 448
 449static const struct target_core_fabric_ops xcopy_pt_tfo = {
 450        .fabric_name            = "xcopy-pt",
 451        .get_cmd_state          = xcopy_pt_get_cmd_state,
 452        .release_cmd            = xcopy_pt_release_cmd,
 453        .check_stop_free        = xcopy_pt_check_stop_free,
 454        .write_pending          = xcopy_pt_write_pending,
 455        .queue_data_in          = xcopy_pt_queue_data_in,
 456        .queue_status           = xcopy_pt_queue_status,
 457};
 458
 459/*
 460 * End xcopy_pt_ops
 461 */
 462
 463int target_xcopy_setup_pt(void)
 464{
 465        int ret;
 466
 467        xcopy_wq = alloc_workqueue("xcopy_wq", WQ_MEM_RECLAIM, 0);
 468        if (!xcopy_wq) {
 469                pr_err("Unable to allocate xcopy_wq\n");
 470                return -ENOMEM;
 471        }
 472
 473        memset(&xcopy_pt_tpg, 0, sizeof(struct se_portal_group));
 474        INIT_LIST_HEAD(&xcopy_pt_tpg.acl_node_list);
 475        INIT_LIST_HEAD(&xcopy_pt_tpg.tpg_sess_list);
 476
 477        xcopy_pt_tpg.se_tpg_tfo = &xcopy_pt_tfo;
 478
 479        memset(&xcopy_pt_nacl, 0, sizeof(struct se_node_acl));
 480        INIT_LIST_HEAD(&xcopy_pt_nacl.acl_list);
 481        INIT_LIST_HEAD(&xcopy_pt_nacl.acl_sess_list);
 482        memset(&xcopy_pt_sess, 0, sizeof(struct se_session));
 483        ret = transport_init_session(&xcopy_pt_sess);
 484        if (ret < 0)
 485                goto destroy_wq;
 486
 487        xcopy_pt_nacl.se_tpg = &xcopy_pt_tpg;
 488        xcopy_pt_nacl.nacl_sess = &xcopy_pt_sess;
 489
 490        xcopy_pt_sess.se_tpg = &xcopy_pt_tpg;
 491        xcopy_pt_sess.se_node_acl = &xcopy_pt_nacl;
 492
 493        return 0;
 494
 495destroy_wq:
 496        destroy_workqueue(xcopy_wq);
 497        xcopy_wq = NULL;
 498        return ret;
 499}
 500
 501void target_xcopy_release_pt(void)
 502{
 503        if (xcopy_wq) {
 504                destroy_workqueue(xcopy_wq);
 505                transport_uninit_session(&xcopy_pt_sess);
 506        }
 507}
 508
 509/*
 510 * target_xcopy_setup_pt_cmd - set up a pass-through command
 511 * @xpt_cmd:     Data structure to initialize.
 512 * @xop:         Describes the XCOPY operation received from an initiator.
 513 * @se_dev:      Backend device to associate with @xpt_cmd if
 514 *               @remote_port == true.
 515 * @cdb:         SCSI CDB to be copied into @xpt_cmd.
 516 * @remote_port: If false, use the LUN through which the XCOPY command has
 517 *               been received. If true, use @se_dev->xcopy_lun.
 518 *
 519 * Set up a SCSI command (READ or WRITE) that will be used to execute an
 520 * XCOPY command.
 521 */
 522static int target_xcopy_setup_pt_cmd(
 523        struct xcopy_pt_cmd *xpt_cmd,
 524        struct xcopy_op *xop,
 525        struct se_device *se_dev,
 526        unsigned char *cdb,
 527        bool remote_port)
 528{
 529        struct se_cmd *cmd = &xpt_cmd->se_cmd;
 530
 531        /*
 532         * Setup LUN+port to honor reservations based upon xop->op_origin for
 533         * X-COPY PUSH or X-COPY PULL based upon where the CDB was received.
 534         */
 535        if (remote_port) {
 536                cmd->se_lun = &se_dev->xcopy_lun;
 537                cmd->se_dev = se_dev;
 538        } else {
 539                cmd->se_lun = xop->xop_se_cmd->se_lun;
 540                cmd->se_dev = xop->xop_se_cmd->se_dev;
 541        }
 542        cmd->se_cmd_flags |= SCF_SE_LUN_CMD;
 543
 544        if (target_cmd_init_cdb(cmd, cdb, GFP_KERNEL))
 545                return -EINVAL;
 546
 547        cmd->tag = 0;
 548        if (target_cmd_parse_cdb(cmd))
 549                return -EINVAL;
 550
 551        if (transport_generic_map_mem_to_cmd(cmd, xop->xop_data_sg,
 552                                        xop->xop_data_nents, NULL, 0))
 553                return -EINVAL;
 554
 555        pr_debug("Setup PASSTHROUGH_NOALLOC t_data_sg: %p t_data_nents:"
 556                 " %u\n", cmd->t_data_sg, cmd->t_data_nents);
 557
 558        return 0;
 559}
 560
 561static int target_xcopy_issue_pt_cmd(struct xcopy_pt_cmd *xpt_cmd)
 562{
 563        struct se_cmd *se_cmd = &xpt_cmd->se_cmd;
 564        sense_reason_t sense_rc;
 565
 566        sense_rc = transport_generic_new_cmd(se_cmd);
 567        if (sense_rc)
 568                return -EINVAL;
 569
 570        if (se_cmd->data_direction == DMA_TO_DEVICE)
 571                target_execute_cmd(se_cmd);
 572
 573        wait_for_completion_interruptible(&xpt_cmd->xpt_passthrough_sem);
 574
 575        pr_debug("target_xcopy_issue_pt_cmd(): SCSI status: 0x%02x\n",
 576                        se_cmd->scsi_status);
 577
 578        return (se_cmd->scsi_status) ? -EINVAL : 0;
 579}
 580
 581static int target_xcopy_read_source(
 582        struct se_cmd *ec_cmd,
 583        struct xcopy_op *xop,
 584        struct se_device *src_dev,
 585        sector_t src_lba,
 586        u32 src_sectors)
 587{
 588        struct xcopy_pt_cmd xpt_cmd;
 589        struct se_cmd *se_cmd = &xpt_cmd.se_cmd;
 590        u32 length = (src_sectors * src_dev->dev_attrib.block_size);
 591        int rc;
 592        unsigned char cdb[16];
 593        bool remote_port = (xop->op_origin == XCOL_DEST_RECV_OP);
 594
 595        memset(&xpt_cmd, 0, sizeof(xpt_cmd));
 596        init_completion(&xpt_cmd.xpt_passthrough_sem);
 597
 598        memset(&cdb[0], 0, 16);
 599        cdb[0] = READ_16;
 600        put_unaligned_be64(src_lba, &cdb[2]);
 601        put_unaligned_be32(src_sectors, &cdb[10]);
 602        pr_debug("XCOPY: Built READ_16: LBA: %llu Sectors: %u Length: %u\n",
 603                (unsigned long long)src_lba, src_sectors, length);
 604
 605        __target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length,
 606                          DMA_FROM_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0);
 607
 608        rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, src_dev, &cdb[0],
 609                                remote_port);
 610        if (rc < 0) {
 611                ec_cmd->scsi_status = se_cmd->scsi_status;
 612                goto out;
 613        }
 614
 615        pr_debug("XCOPY-READ: Saved xop->xop_data_sg: %p, num: %u for READ"
 616                " memory\n", xop->xop_data_sg, xop->xop_data_nents);
 617
 618        rc = target_xcopy_issue_pt_cmd(&xpt_cmd);
 619        if (rc < 0)
 620                ec_cmd->scsi_status = se_cmd->scsi_status;
 621out:
 622        transport_generic_free_cmd(se_cmd, 0);
 623        return rc;
 624}
 625
 626static int target_xcopy_write_destination(
 627        struct se_cmd *ec_cmd,
 628        struct xcopy_op *xop,
 629        struct se_device *dst_dev,
 630        sector_t dst_lba,
 631        u32 dst_sectors)
 632{
 633        struct xcopy_pt_cmd xpt_cmd;
 634        struct se_cmd *se_cmd = &xpt_cmd.se_cmd;
 635        u32 length = (dst_sectors * dst_dev->dev_attrib.block_size);
 636        int rc;
 637        unsigned char cdb[16];
 638        bool remote_port = (xop->op_origin == XCOL_SOURCE_RECV_OP);
 639
 640        memset(&xpt_cmd, 0, sizeof(xpt_cmd));
 641        init_completion(&xpt_cmd.xpt_passthrough_sem);
 642
 643        memset(&cdb[0], 0, 16);
 644        cdb[0] = WRITE_16;
 645        put_unaligned_be64(dst_lba, &cdb[2]);
 646        put_unaligned_be32(dst_sectors, &cdb[10]);
 647        pr_debug("XCOPY: Built WRITE_16: LBA: %llu Sectors: %u Length: %u\n",
 648                (unsigned long long)dst_lba, dst_sectors, length);
 649
 650        __target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length,
 651                          DMA_TO_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0);
 652
 653        rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, dst_dev, &cdb[0],
 654                                remote_port);
 655        if (rc < 0) {
 656                ec_cmd->scsi_status = se_cmd->scsi_status;
 657                goto out;
 658        }
 659
 660        rc = target_xcopy_issue_pt_cmd(&xpt_cmd);
 661        if (rc < 0)
 662                ec_cmd->scsi_status = se_cmd->scsi_status;
 663out:
 664        transport_generic_free_cmd(se_cmd, 0);
 665        return rc;
 666}
 667
 668static void target_xcopy_do_work(struct work_struct *work)
 669{
 670        struct xcopy_op *xop = container_of(work, struct xcopy_op, xop_work);
 671        struct se_cmd *ec_cmd = xop->xop_se_cmd;
 672        struct se_device *src_dev, *dst_dev;
 673        sector_t src_lba, dst_lba, end_lba;
 674        unsigned int max_sectors;
 675        int rc = 0;
 676        unsigned short nolb, max_nolb, copied_nolb = 0;
 677        sense_reason_t sense_rc;
 678
 679        sense_rc = target_parse_xcopy_cmd(xop);
 680        if (sense_rc != TCM_NO_SENSE)
 681                goto err_free;
 682
 683        if (WARN_ON_ONCE(!xop->src_dev) || WARN_ON_ONCE(!xop->dst_dev)) {
 684                sense_rc = TCM_INVALID_PARAMETER_LIST;
 685                goto err_free;
 686        }
 687
 688        src_dev = xop->src_dev;
 689        dst_dev = xop->dst_dev;
 690        src_lba = xop->src_lba;
 691        dst_lba = xop->dst_lba;
 692        nolb = xop->nolb;
 693        end_lba = src_lba + nolb;
 694        /*
 695         * Break up XCOPY I/O into hw_max_sectors sized I/O based on the
 696         * smallest max_sectors between src_dev + dev_dev, or
 697         */
 698        max_sectors = min(src_dev->dev_attrib.hw_max_sectors,
 699                          dst_dev->dev_attrib.hw_max_sectors);
 700        max_sectors = min_t(u32, max_sectors, XCOPY_MAX_SECTORS);
 701
 702        max_nolb = min_t(u16, max_sectors, ((u16)(~0U)));
 703
 704        pr_debug("target_xcopy_do_work: nolb: %hu, max_nolb: %hu end_lba: %llu\n",
 705                        nolb, max_nolb, (unsigned long long)end_lba);
 706        pr_debug("target_xcopy_do_work: Starting src_lba: %llu, dst_lba: %llu\n",
 707                        (unsigned long long)src_lba, (unsigned long long)dst_lba);
 708
 709        while (src_lba < end_lba) {
 710                unsigned short cur_nolb = min(nolb, max_nolb);
 711                u32 cur_bytes = cur_nolb * src_dev->dev_attrib.block_size;
 712
 713                if (cur_bytes != xop->xop_data_bytes) {
 714                        /*
 715                         * (Re)allocate a buffer large enough to hold the XCOPY
 716                         * I/O size, which can be reused each read / write loop.
 717                         */
 718                        target_free_sgl(xop->xop_data_sg, xop->xop_data_nents);
 719                        rc = target_alloc_sgl(&xop->xop_data_sg,
 720                                              &xop->xop_data_nents,
 721                                              cur_bytes,
 722                                              false, false);
 723                        if (rc < 0)
 724                                goto out;
 725                        xop->xop_data_bytes = cur_bytes;
 726                }
 727
 728                pr_debug("target_xcopy_do_work: Calling read src_dev: %p src_lba: %llu,"
 729                        " cur_nolb: %hu\n", src_dev, (unsigned long long)src_lba, cur_nolb);
 730
 731                rc = target_xcopy_read_source(ec_cmd, xop, src_dev, src_lba, cur_nolb);
 732                if (rc < 0)
 733                        goto out;
 734
 735                src_lba += cur_nolb;
 736                pr_debug("target_xcopy_do_work: Incremented READ src_lba to %llu\n",
 737                                (unsigned long long)src_lba);
 738
 739                pr_debug("target_xcopy_do_work: Calling write dst_dev: %p dst_lba: %llu,"
 740                        " cur_nolb: %hu\n", dst_dev, (unsigned long long)dst_lba, cur_nolb);
 741
 742                rc = target_xcopy_write_destination(ec_cmd, xop, dst_dev,
 743                                                dst_lba, cur_nolb);
 744                if (rc < 0)
 745                        goto out;
 746
 747                dst_lba += cur_nolb;
 748                pr_debug("target_xcopy_do_work: Incremented WRITE dst_lba to %llu\n",
 749                                (unsigned long long)dst_lba);
 750
 751                copied_nolb += cur_nolb;
 752                nolb -= cur_nolb;
 753        }
 754
 755        xcopy_pt_undepend_remotedev(xop);
 756        target_free_sgl(xop->xop_data_sg, xop->xop_data_nents);
 757        kfree(xop);
 758
 759        pr_debug("target_xcopy_do_work: Final src_lba: %llu, dst_lba: %llu\n",
 760                (unsigned long long)src_lba, (unsigned long long)dst_lba);
 761        pr_debug("target_xcopy_do_work: Blocks copied: %hu, Bytes Copied: %u\n",
 762                copied_nolb, copied_nolb * dst_dev->dev_attrib.block_size);
 763
 764        pr_debug("target_xcopy_do_work: Setting X-COPY GOOD status -> sending response\n");
 765        target_complete_cmd(ec_cmd, SAM_STAT_GOOD);
 766        return;
 767
 768out:
 769        /*
 770         * The XCOPY command was aborted after some data was transferred.
 771         * Terminate command with CHECK CONDITION status, with the sense key
 772         * set to COPY ABORTED.
 773         */
 774        sense_rc = TCM_COPY_TARGET_DEVICE_NOT_REACHABLE;
 775        xcopy_pt_undepend_remotedev(xop);
 776        target_free_sgl(xop->xop_data_sg, xop->xop_data_nents);
 777
 778err_free:
 779        kfree(xop);
 780        pr_warn_ratelimited("target_xcopy_do_work: rc: %d, sense: %u, XCOPY operation failed\n",
 781                           rc, sense_rc);
 782        target_complete_cmd_with_sense(ec_cmd, SAM_STAT_CHECK_CONDITION, sense_rc);
 783}
 784
 785/*
 786 * Returns TCM_NO_SENSE upon success or a sense code != TCM_NO_SENSE if parsing
 787 * fails.
 788 */
 789static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop)
 790{
 791        struct se_cmd *se_cmd = xop->xop_se_cmd;
 792        unsigned char *p = NULL, *seg_desc;
 793        unsigned int list_id, list_id_usage, sdll, inline_dl;
 794        sense_reason_t ret = TCM_INVALID_PARAMETER_LIST;
 795        int rc;
 796        unsigned short tdll;
 797
 798        p = transport_kmap_data_sg(se_cmd);
 799        if (!p) {
 800                pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n");
 801                return TCM_OUT_OF_RESOURCES;
 802        }
 803
 804        list_id = p[0];
 805        list_id_usage = (p[1] & 0x18) >> 3;
 806
 807        /*
 808         * Determine TARGET DESCRIPTOR LIST LENGTH + SEGMENT DESCRIPTOR LIST LENGTH
 809         */
 810        tdll = get_unaligned_be16(&p[2]);
 811        sdll = get_unaligned_be32(&p[8]);
 812        if (tdll + sdll > RCR_OP_MAX_DESC_LIST_LEN) {
 813                pr_err("XCOPY descriptor list length %u exceeds maximum %u\n",
 814                       tdll + sdll, RCR_OP_MAX_DESC_LIST_LEN);
 815                ret = TCM_PARAMETER_LIST_LENGTH_ERROR;
 816                goto out;
 817        }
 818
 819        inline_dl = get_unaligned_be32(&p[12]);
 820        if (inline_dl != 0) {
 821                pr_err("XCOPY with non zero inline data length\n");
 822                goto out;
 823        }
 824
 825        if (se_cmd->data_length < (XCOPY_HDR_LEN + tdll + sdll + inline_dl)) {
 826                pr_err("XCOPY parameter truncation: data length %u too small "
 827                        "for tdll: %hu sdll: %u inline_dl: %u\n",
 828                        se_cmd->data_length, tdll, sdll, inline_dl);
 829                ret = TCM_PARAMETER_LIST_LENGTH_ERROR;
 830                goto out;
 831        }
 832
 833        pr_debug("Processing XCOPY with list_id: 0x%02x list_id_usage: 0x%02x"
 834                " tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage,
 835                tdll, sdll, inline_dl);
 836
 837        /*
 838         * skip over the target descriptors until segment descriptors
 839         * have been passed - CSCD ids are needed to determine src and dest.
 840         */
 841        seg_desc = &p[16] + tdll;
 842
 843        rc = target_xcopy_parse_segment_descriptors(se_cmd, xop, seg_desc,
 844                                                    sdll, &ret);
 845        if (rc <= 0)
 846                goto out;
 847
 848        pr_debug("XCOPY: Processed %d segment descriptors, length: %u\n", rc,
 849                                rc * XCOPY_SEGMENT_DESC_LEN);
 850
 851        rc = target_xcopy_parse_target_descriptors(se_cmd, xop, &p[16], tdll, &ret);
 852        if (rc <= 0)
 853                goto out;
 854
 855        if (xop->src_dev->dev_attrib.block_size !=
 856            xop->dst_dev->dev_attrib.block_size) {
 857                pr_err("XCOPY: Non matching src_dev block_size: %u + dst_dev"
 858                       " block_size: %u currently unsupported\n",
 859                        xop->src_dev->dev_attrib.block_size,
 860                        xop->dst_dev->dev_attrib.block_size);
 861                xcopy_pt_undepend_remotedev(xop);
 862                ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 863                goto out;
 864        }
 865
 866        pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc,
 867                                rc * XCOPY_TARGET_DESC_LEN);
 868        transport_kunmap_data_sg(se_cmd);
 869        return TCM_NO_SENSE;
 870
 871out:
 872        if (p)
 873                transport_kunmap_data_sg(se_cmd);
 874        return ret;
 875}
 876
 877sense_reason_t target_do_xcopy(struct se_cmd *se_cmd)
 878{
 879        struct se_device *dev = se_cmd->se_dev;
 880        struct xcopy_op *xop;
 881        unsigned int sa;
 882
 883        if (!dev->dev_attrib.emulate_3pc) {
 884                pr_err("EXTENDED_COPY operation explicitly disabled\n");
 885                return TCM_UNSUPPORTED_SCSI_OPCODE;
 886        }
 887
 888        sa = se_cmd->t_task_cdb[1] & 0x1f;
 889        if (sa != 0x00) {
 890                pr_err("EXTENDED_COPY(LID4) not supported\n");
 891                return TCM_UNSUPPORTED_SCSI_OPCODE;
 892        }
 893
 894        if (se_cmd->data_length == 0) {
 895                target_complete_cmd(se_cmd, SAM_STAT_GOOD);
 896                return TCM_NO_SENSE;
 897        }
 898        if (se_cmd->data_length < XCOPY_HDR_LEN) {
 899                pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n",
 900                                se_cmd->data_length, XCOPY_HDR_LEN);
 901                return TCM_PARAMETER_LIST_LENGTH_ERROR;
 902        }
 903
 904        xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL);
 905        if (!xop)
 906                goto err;
 907        xop->xop_se_cmd = se_cmd;
 908        INIT_WORK(&xop->xop_work, target_xcopy_do_work);
 909        if (WARN_ON_ONCE(!queue_work(xcopy_wq, &xop->xop_work)))
 910                goto free;
 911        return TCM_NO_SENSE;
 912
 913free:
 914        kfree(xop);
 915
 916err:
 917        return TCM_OUT_OF_RESOURCES;
 918}
 919
 920static sense_reason_t target_rcr_operating_parameters(struct se_cmd *se_cmd)
 921{
 922        unsigned char *p;
 923
 924        p = transport_kmap_data_sg(se_cmd);
 925        if (!p) {
 926                pr_err("transport_kmap_data_sg failed in"
 927                       " target_rcr_operating_parameters\n");
 928                return TCM_OUT_OF_RESOURCES;
 929        }
 930
 931        if (se_cmd->data_length < 54) {
 932                pr_err("Receive Copy Results Op Parameters length"
 933                       " too small: %u\n", se_cmd->data_length);
 934                transport_kunmap_data_sg(se_cmd);
 935                return TCM_INVALID_CDB_FIELD;
 936        }
 937        /*
 938         * Set SNLID=1 (Supports no List ID)
 939         */
 940        p[4] = 0x1;
 941        /*
 942         * MAXIMUM TARGET DESCRIPTOR COUNT
 943         */
 944        put_unaligned_be16(RCR_OP_MAX_TARGET_DESC_COUNT, &p[8]);
 945        /*
 946         * MAXIMUM SEGMENT DESCRIPTOR COUNT
 947         */
 948        put_unaligned_be16(RCR_OP_MAX_SG_DESC_COUNT, &p[10]);
 949        /*
 950         * MAXIMUM DESCRIPTOR LIST LENGTH
 951         */
 952        put_unaligned_be32(RCR_OP_MAX_DESC_LIST_LEN, &p[12]);
 953        /*
 954         * MAXIMUM SEGMENT LENGTH
 955         */
 956        put_unaligned_be32(RCR_OP_MAX_SEGMENT_LEN, &p[16]);
 957        /*
 958         * MAXIMUM INLINE DATA LENGTH for SA 0x04 (NOT SUPPORTED)
 959         */
 960        put_unaligned_be32(0x0, &p[20]);
 961        /*
 962         * HELD DATA LIMIT
 963         */
 964        put_unaligned_be32(0x0, &p[24]);
 965        /*
 966         * MAXIMUM STREAM DEVICE TRANSFER SIZE
 967         */
 968        put_unaligned_be32(0x0, &p[28]);
 969        /*
 970         * TOTAL CONCURRENT COPIES
 971         */
 972        put_unaligned_be16(RCR_OP_TOTAL_CONCURR_COPIES, &p[34]);
 973        /*
 974         * MAXIMUM CONCURRENT COPIES
 975         */
 976        p[36] = RCR_OP_MAX_CONCURR_COPIES;
 977        /*
 978         * DATA SEGMENT GRANULARITY (log 2)
 979         */
 980        p[37] = RCR_OP_DATA_SEG_GRAN_LOG2;
 981        /*
 982         * INLINE DATA GRANULARITY log 2)
 983         */
 984        p[38] = RCR_OP_INLINE_DATA_GRAN_LOG2;
 985        /*
 986         * HELD DATA GRANULARITY
 987         */
 988        p[39] = RCR_OP_HELD_DATA_GRAN_LOG2;
 989        /*
 990         * IMPLEMENTED DESCRIPTOR LIST LENGTH
 991         */
 992        p[43] = 0x2;
 993        /*
 994         * List of implemented descriptor type codes (ordered)
 995         */
 996        p[44] = 0x02; /* Copy Block to Block device */
 997        p[45] = 0xe4; /* Identification descriptor target descriptor */
 998
 999        /*
1000         * AVAILABLE DATA (n-3)
1001         */
1002        put_unaligned_be32(42, &p[0]);
1003
1004        transport_kunmap_data_sg(se_cmd);
1005        target_complete_cmd(se_cmd, SAM_STAT_GOOD);
1006
1007        return TCM_NO_SENSE;
1008}
1009
1010sense_reason_t target_do_receive_copy_results(struct se_cmd *se_cmd)
1011{
1012        unsigned char *cdb = &se_cmd->t_task_cdb[0];
1013        int sa = (cdb[1] & 0x1f), list_id = cdb[2];
1014        sense_reason_t rc = TCM_NO_SENSE;
1015
1016        pr_debug("Entering target_do_receive_copy_results: SA: 0x%02x, List ID:"
1017                " 0x%02x, AL: %u\n", sa, list_id, se_cmd->data_length);
1018
1019        if (list_id != 0) {
1020                pr_err("Receive Copy Results with non zero list identifier"
1021                       " not supported\n");
1022                return TCM_INVALID_CDB_FIELD;
1023        }
1024
1025        switch (sa) {
1026        case RCR_SA_OPERATING_PARAMETERS:
1027                rc = target_rcr_operating_parameters(se_cmd);
1028                break;
1029        case RCR_SA_COPY_STATUS:
1030        case RCR_SA_RECEIVE_DATA:
1031        case RCR_SA_FAILED_SEGMENT_DETAILS:
1032        default:
1033                pr_err("Unsupported SA for receive copy results: 0x%02x\n", sa);
1034                return TCM_INVALID_CDB_FIELD;
1035        }
1036
1037        return rc;
1038}
1039