// SPDX-License-Identifier: GPL-1.0+
/*
 * Renesas USB driver
 *
 * Copyright (C) 2011 Renesas Solutions Corp.
 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 */
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include "common.h"

/*
 *** HARDWARE LIMITATION ***
 *
 * 1) renesas_usbhs has a limited number of controllable devices.
 *    it can control only 9 devices in generally.
 *      see DEVADDn / DCPMAXP / PIPEMAXP.
 *
 * 2) renesas_usbhs pipe number is limited.
 *    the pipe will be re-used for each devices.
 *    so, software should control DATA0/1 sequence of each devices.
 */


/*
 *              image of mod_host
 *
 * +--------+
 * | udev 0 | --> it is used when set address
 * +--------+
 *
 * +--------+                                   pipes are reused for each uep.
 * | udev 1 |-+- [uep 0 (dcp) ] --+             pipe will be switched when
 * +--------+ |                   |             other device requested
 *            +- [uep 1 (bulk)] --|---+            +--------------+
 *            |                   +--------------> | pipe0 (dcp)  |
 *            +- [uep 2 (bulk)] -@    |            +--------------+
 *                                    |            | pipe1 (isoc) |
 * +--------+                         |            +--------------+
 * | udev 2 |-+- [uep 0 (dcp) ] -@    +----------> | pipe2 (bulk) |
 * +--------+ |                                    +--------------+
 *            +- [uep 1 (int) ] ----+     +------> | pipe3 (bulk) |
 *                                  |     |        +--------------+
 * +--------+                       +-----|------> | pipe4 (int)  |
 * | udev 3 |-+- [uep 0 (dcp) ] -@        |        +--------------+
 * +--------+ |                           |        | ....         |
 *            +- [uep 1 (bulk)] -@        |        | ....         |
 *            |                           |
 *            +- [uep 2 (bulk)]-----------+
 *
 * @ :  uep requested free pipe, but all have been used.
 *      now it is waiting for free pipe
 */


/*
 *              struct
 */
struct usbhsh_request {
        struct urb              *urb;
        struct usbhs_pkt        pkt;
};

struct usbhsh_device {
        struct usb_device       *usbv;
        struct list_head        ep_list_head; /* list of usbhsh_ep */
};

struct usbhsh_ep {
        struct usbhs_pipe       *pipe;   /* attached pipe */
        struct usbhsh_device    *udev;   /* attached udev */
        struct usb_host_endpoint *ep;
        struct list_head        ep_list; /* list to usbhsh_device */
        unsigned int            counter; /* pipe attach counter */
};

#define USBHSH_DEVICE_MAX       10 /* see DEVADDn / DCPMAXP / PIPEMAXP */
#define USBHSH_PORT_MAX          7 /* see DEVADDn :: HUBPORT */
struct usbhsh_hpriv {
        struct usbhs_mod        mod;
        struct usbhs_pipe       *dcp;

        struct usbhsh_device    udev[USBHSH_DEVICE_MAX];

        u32     port_stat;      /* USB_PORT_STAT_xxx */

        struct completion       setup_ack_done;
};


static const char usbhsh_hcd_name[] = "renesas_usbhs host";

/*
 *              macro
 */
#define usbhsh_priv_to_hpriv(priv) \
        container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod)

#define __usbhsh_for_each_udev(start, pos, h, i)        \
        for ((i) = start;                                               \
             ((i) < USBHSH_DEVICE_MAX) && ((pos) = (h)->udev + (i));    \
             (i)++)

#define usbhsh_for_each_udev(pos, hpriv, i)     \
        __usbhsh_for_each_udev(1, pos, hpriv, i)

#define usbhsh_for_each_udev_with_dev0(pos, hpriv, i)   \
        __usbhsh_for_each_udev(0, pos, hpriv, i)

#define usbhsh_hcd_to_hpriv(h)  (struct usbhsh_hpriv *)((h)->hcd_priv)
#define usbhsh_hcd_to_dev(h)    ((h)->self.controller)

#define usbhsh_hpriv_to_priv(h) ((h)->mod.priv)
#define usbhsh_hpriv_to_dcp(h)  ((h)->dcp)
#define usbhsh_hpriv_to_hcd(h)  \
        container_of((void *)h, struct usb_hcd, hcd_priv)

#define usbhsh_ep_to_uep(u)     ((u)->hcpriv)
#define usbhsh_uep_to_pipe(u)   ((u)->pipe)
#define usbhsh_uep_to_udev(u)   ((u)->udev)
#define usbhsh_uep_to_ep(u)     ((u)->ep)

#define usbhsh_urb_to_ureq(u)   ((u)->hcpriv)
#define usbhsh_urb_to_usbv(u)   ((u)->dev)

#define usbhsh_usbv_to_udev(d)  dev_get_drvdata(&(d)->dev)

#define usbhsh_udev_to_usbv(h)  ((h)->usbv)
#define usbhsh_udev_is_used(h)  usbhsh_udev_to_usbv(h)

#define usbhsh_pipe_to_uep(p)   ((p)->mod_private)

#define usbhsh_device_parent(d)         (usbhsh_usbv_to_udev((d)->usbv->parent))
#define usbhsh_device_hubport(d)        ((d)->usbv->portnum)
#define usbhsh_device_number(h, d)      ((int)((d) - (h)->udev))
#define usbhsh_device_nth(h, d)         ((h)->udev + d)
#define usbhsh_device0(h)               usbhsh_device_nth(h, 0)

#define usbhsh_port_stat_init(h)        ((h)->port_stat = 0)
#define usbhsh_port_stat_set(h, s)      ((h)->port_stat |= (s))
#define usbhsh_port_stat_clear(h, s)    ((h)->port_stat &= ~(s))
#define usbhsh_port_stat_get(h)         ((h)->port_stat)

#define usbhsh_pkt_to_ureq(p)   \
        container_of((void *)p, struct usbhsh_request, pkt)

/*
 *              req alloc/free
 */
static struct usbhsh_request *usbhsh_ureq_alloc(struct usbhsh_hpriv *hpriv,
                                               struct urb *urb,
                                               gfp_t mem_flags)
{
        struct usbhsh_request *ureq;

        ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags);
        if (!ureq)
                return NULL;

        usbhs_pkt_init(&ureq->pkt);
        ureq->urb = urb;
        usbhsh_urb_to_ureq(urb) = ureq;

        return ureq;
}

static void usbhsh_ureq_free(struct usbhsh_hpriv *hpriv,
                            struct usbhsh_request *ureq)
{
        usbhsh_urb_to_ureq(ureq->urb) = NULL;
        ureq->urb = NULL;

        kfree(ureq);
}

/*
 *              status
 */
static int usbhsh_is_running(struct usbhsh_hpriv *hpriv)
{
        /*
         * we can decide some device is attached or not
         * by checking mod.irq_attch
         * see
         *      usbhsh_irq_attch()
         *      usbhsh_irq_dtch()
         */
        return (hpriv->mod.irq_attch == NULL);
}

/*
 *              pipe control
 */
static void usbhsh_endpoint_sequence_save(struct usbhsh_hpriv *hpriv,
                                          struct urb *urb,
                                          struct usbhs_pkt *pkt)
{
        int len = urb->actual_length;
        int maxp = usb_endpoint_maxp(&urb->ep->desc);
        int t = 0;

        /* DCP is out of sequence control */
        if (usb_pipecontrol(urb->pipe))
                return;

        /*
         * renesas_usbhs pipe has a limitation in a number.
         * So, driver should re-use the limited pipe for each device/endpoint.
         * DATA0/1 sequence should be saved for it.
         * see [image of mod_host]
         *     [HARDWARE LIMITATION]
         */

        /*
         * next sequence depends on actual_length
         *
         * ex) actual_length = 1147, maxp = 512
         * data0 : 512
         * data1 : 512
         * data0 : 123
         * data1 is the next sequence
         */
        t = len / maxp;
        if (len % maxp)
                t++;
        if (pkt->zero)
                t++;
        t %= 2;

        if (t)
                usb_dotoggle(urb->dev,
                             usb_pipeendpoint(urb->pipe),
                             usb_pipeout(urb->pipe));
}

static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv,
                                               struct urb *urb);

static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv,
                              struct urb *urb)
{
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
        struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb);
        struct usbhs_pipe *pipe;
        struct usb_endpoint_descriptor *desc = &urb->ep->desc;
        struct device *dev = usbhs_priv_to_dev(priv);
        unsigned long flags;
        int dir_in_req = !!usb_pipein(urb->pipe);
        int is_dcp = usb_endpoint_xfer_control(desc);
        int i, dir_in;
        int ret = -EBUSY;

        /********************  spin lock ********************/
        usbhs_lock(priv, flags);

        /*
         * if uep has been attached to pipe,
         * reuse it
         */
        if (usbhsh_uep_to_pipe(uep)) {
                ret = 0;
                goto usbhsh_pipe_attach_done;
        }

        usbhs_for_each_pipe_with_dcp(pipe, priv, i) {

                /* check pipe type */
                if (!usbhs_pipe_type_is(pipe, usb_endpoint_type(desc)))
                        continue;

                /* check pipe direction if normal pipe */
                if (!is_dcp) {
                        dir_in = !!usbhs_pipe_is_dir_in(pipe);
                        if (0 != (dir_in - dir_in_req))
                                continue;
                }

                /* check pipe is free */
                if (usbhsh_pipe_to_uep(pipe))
                        continue;

                /*
                 * attach pipe to uep
                 *
                 * usbhs_pipe_config_update() should be called after
                 * usbhs_set_device_config()
                 * see
                 *  DCPMAXP/PIPEMAXP
                 */
                usbhsh_uep_to_pipe(uep)         = pipe;
                usbhsh_pipe_to_uep(pipe)        = uep;

                usbhs_pipe_config_update(pipe,
                                         usbhsh_device_number(hpriv, udev),
                                         usb_endpoint_num(desc),
                                         usb_endpoint_maxp(desc));

                dev_dbg(dev, "%s [%d-%d(%s:%s)]\n", __func__,
                        usbhsh_device_number(hpriv, udev),
                        usb_endpoint_num(desc),
                        usbhs_pipe_name(pipe),
                        dir_in_req ? "in" : "out");

                ret = 0;
                break;
        }

usbhsh_pipe_attach_done:
        if (0 == ret)
                uep->counter++;

        usbhs_unlock(priv, flags);
        /********************  spin unlock ******************/

        return ret;
}

static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv,
                               struct usbhsh_ep *uep)
{
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct usbhs_pipe *pipe;
        struct device *dev = usbhs_priv_to_dev(priv);
        unsigned long flags;

        if (unlikely(!uep)) {
                dev_err(dev, "no uep\n");
                return;
        }

        /********************  spin lock ********************/
        usbhs_lock(priv, flags);

        pipe = usbhsh_uep_to_pipe(uep);

        if (unlikely(!pipe)) {
                dev_err(dev, "uep doesn't have pipe\n");
        } else if (1 == uep->counter--) { /* last user */
                struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep);
                struct usbhsh_device *udev = usbhsh_uep_to_udev(uep);

                /* detach pipe from uep */
                usbhsh_uep_to_pipe(uep)         = NULL;
                usbhsh_pipe_to_uep(pipe)        = NULL;

                dev_dbg(dev, "%s [%d-%d(%s)]\n", __func__,
                        usbhsh_device_number(hpriv, udev),
                        usb_endpoint_num(&ep->desc),
                        usbhs_pipe_name(pipe));
        }

        usbhs_unlock(priv, flags);
        /********************  spin unlock ******************/
}

/*
 *              endpoint control
 */
static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv,
                                  struct urb *urb,
                                  gfp_t mem_flags)
{
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb);
        struct usb_host_endpoint *ep = urb->ep;
        struct usbhsh_ep *uep;
        struct device *dev = usbhs_priv_to_dev(priv);
        struct usb_endpoint_descriptor *desc = &ep->desc;
        unsigned long flags;

        uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
        if (!uep)
                return -ENOMEM;

        /********************  spin lock ********************/
        usbhs_lock(priv, flags);

        /*
         * init endpoint
         */
        uep->counter = 0;
        INIT_LIST_HEAD(&uep->ep_list);
        list_add_tail(&uep->ep_list, &udev->ep_list_head);

        usbhsh_uep_to_udev(uep) = udev;
        usbhsh_uep_to_ep(uep)   = ep;
        usbhsh_ep_to_uep(ep)    = uep;

        usbhs_unlock(priv, flags);
        /********************  spin unlock ******************/

        dev_dbg(dev, "%s [%d-%d]\n", __func__,
                usbhsh_device_number(hpriv, udev),
                usb_endpoint_num(desc));

        return 0;
}

static void usbhsh_endpoint_detach(struct usbhsh_hpriv *hpriv,
                                   struct usb_host_endpoint *ep)
{
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct device *dev = usbhs_priv_to_dev(priv);
        struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
        unsigned long flags;

        if (!uep)
                return;

        dev_dbg(dev, "%s [%d-%d]\n", __func__,
                usbhsh_device_number(hpriv, usbhsh_uep_to_udev(uep)),
                usb_endpoint_num(&ep->desc));

        if (usbhsh_uep_to_pipe(uep))
                usbhsh_pipe_detach(hpriv, uep);

        /********************  spin lock ********************/
        usbhs_lock(priv, flags);

        /* remove this endpoint from udev */
        list_del_init(&uep->ep_list);

        usbhsh_uep_to_udev(uep) = NULL;
        usbhsh_uep_to_ep(uep)   = NULL;
        usbhsh_ep_to_uep(ep)    = NULL;

        usbhs_unlock(priv, flags);
        /********************  spin unlock ******************/

        kfree(uep);
}

static void usbhsh_endpoint_detach_all(struct usbhsh_hpriv *hpriv,
                                       struct usbhsh_device *udev)
{
        struct usbhsh_ep *uep, *next;

        list_for_each_entry_safe(uep, next, &udev->ep_list_head, ep_list)
                usbhsh_endpoint_detach(hpriv, usbhsh_uep_to_ep(uep));
}

/*
 *              device control
 */
static int usbhsh_connected_to_rhdev(struct usb_hcd *hcd,
                                     struct usbhsh_device *udev)
{
        struct usb_device *usbv = usbhsh_udev_to_usbv(udev);

        return hcd->self.root_hub == usbv->parent;
}

static int usbhsh_device_has_endpoint(struct usbhsh_device *udev)
{
        return !list_empty(&udev->ep_list_head);
}

static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv,
                                               struct urb *urb)
{
        struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
        struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv);

        /* usbhsh_device_attach() is still not called */
        if (!udev)
                return NULL;

        /* if it is device0, return it */
        if (0 == usb_pipedevice(urb->pipe))
                return usbhsh_device0(hpriv);

        /* return attached device */
        return udev;
}

static struct usbhsh_device *usbhsh_device_attach(struct usbhsh_hpriv *hpriv,
                                                 struct urb *urb)
{
        struct usbhsh_device *udev = NULL;
        struct usbhsh_device *udev0 = usbhsh_device0(hpriv);
        struct usbhsh_device *pos;
        struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
        struct device *dev = usbhsh_hcd_to_dev(hcd);
        struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        unsigned long flags;
        u16 upphub, hubport;
        int i;

        /*
         * This function should be called only while urb is pointing to device0.
         * It will attach unused usbhsh_device to urb (usbv),
         * and initialize device0.
         * You can use usbhsh_device_get() to get "current" udev,
         * and usbhsh_usbv_to_udev() is for "attached" udev.
         */
        if (0 != usb_pipedevice(urb->pipe)) {
                dev_err(dev, "%s fail: urb isn't pointing device0\n", __func__);
                return NULL;
        }

        /********************  spin lock ********************/
        usbhs_lock(priv, flags);

        /*
         * find unused device
         */
        usbhsh_for_each_udev(pos, hpriv, i) {
                if (usbhsh_udev_is_used(pos))
                        continue;
                udev = pos;
                break;
        }

        if (udev) {
                /*
                 * usbhsh_usbv_to_udev()
                 * usbhsh_udev_to_usbv()
                 * will be enable
                 */
                dev_set_drvdata(&usbv->dev, udev);
                udev->usbv = usbv;
        }

        usbhs_unlock(priv, flags);
        /********************  spin unlock ******************/

        if (!udev) {
                dev_err(dev, "no free usbhsh_device\n");
                return NULL;
        }

        if (usbhsh_device_has_endpoint(udev)) {
                dev_warn(dev, "udev have old endpoint\n");
                usbhsh_endpoint_detach_all(hpriv, udev);
        }

        if (usbhsh_device_has_endpoint(udev0)) {
                dev_warn(dev, "udev0 have old endpoint\n");
                usbhsh_endpoint_detach_all(hpriv, udev0);
        }

        /* uep will be attached */
        INIT_LIST_HEAD(&udev0->ep_list_head);
        INIT_LIST_HEAD(&udev->ep_list_head);

        /*
         * set device0 config
         */
        usbhs_set_device_config(priv,
                                0, 0, 0, usbv->speed);

        /*
         * set new device config
         */
        upphub  = 0;
        hubport = 0;
        if (!usbhsh_connected_to_rhdev(hcd, udev)) {
                /* if udev is not connected to rhdev, it means parent is Hub */
                struct usbhsh_device *parent = usbhsh_device_parent(udev);

                upphub  = usbhsh_device_number(hpriv, parent);
                hubport = usbhsh_device_hubport(udev);

                dev_dbg(dev, "%s connected to Hub [%d:%d](%p)\n", __func__,
                        upphub, hubport, parent);
        }

        usbhs_set_device_config(priv,
                               usbhsh_device_number(hpriv, udev),
                               upphub, hubport, usbv->speed);

        dev_dbg(dev, "%s [%d](%p)\n", __func__,
                usbhsh_device_number(hpriv, udev), udev);

        return udev;
}

static void usbhsh_device_detach(struct usbhsh_hpriv *hpriv,
                               struct usbhsh_device *udev)
{
        struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct device *dev = usbhsh_hcd_to_dev(hcd);
        struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
        unsigned long flags;

        dev_dbg(dev, "%s [%d](%p)\n", __func__,
                usbhsh_device_number(hpriv, udev), udev);

        if (usbhsh_device_has_endpoint(udev)) {
                dev_warn(dev, "udev still have endpoint\n");
                usbhsh_endpoint_detach_all(hpriv, udev);
        }

        /*
         * There is nothing to do if it is device0.
         * see
         *  usbhsh_device_attach()
         *  usbhsh_device_get()
         */
        if (0 == usbhsh_device_number(hpriv, udev))
                return;

        /********************  spin lock ********************/
        usbhs_lock(priv, flags);

        /*
         * usbhsh_usbv_to_udev()
         * usbhsh_udev_to_usbv()
         * will be disable
         */
        dev_set_drvdata(&usbv->dev, NULL);
        udev->usbv = NULL;

        usbhs_unlock(priv, flags);
        /********************  spin unlock ******************/
}

/*
 *              queue push/pop
 */
static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
{
        struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
        struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
        struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
        struct urb *urb = ureq->urb;
        struct device *dev = usbhs_priv_to_dev(priv);
        int status = 0;

        dev_dbg(dev, "%s\n", __func__);

        if (!urb) {
                dev_warn(dev, "pkt doesn't have urb\n");
                return;
        }

        if (!usbhsh_is_running(hpriv))
                status = -ESHUTDOWN;

        urb->actual_length = pkt->actual;

        usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
        usbhsh_ureq_free(hpriv, ureq);

        usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep));

        usb_hcd_unlink_urb_from_ep(hcd, urb);
        usb_hcd_giveback_urb(hcd, urb, status);
}

static int usbhsh_queue_push(struct usb_hcd *hcd,
                             struct urb *urb,
                             gfp_t mem_flags)
{
        struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
        struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
        struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
        struct device *dev = usbhsh_hcd_to_dev(hcd);
        struct usbhsh_request *ureq;
        void *buf;
        int len, sequence;

        if (usb_pipeisoc(urb->pipe)) {
                dev_err(dev, "pipe iso is not supported now\n");
                return -EIO;
        }

        /* this ureq will be freed on usbhsh_queue_done() */
        ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
        if (unlikely(!ureq)) {
                dev_err(dev, "ureq alloc fail\n");
                return -ENOMEM;
        }

        if (usb_pipein(urb->pipe))
                pipe->handler = &usbhs_fifo_dma_pop_handler;
        else
                pipe->handler = &usbhs_fifo_dma_push_handler;

        buf = (void *)(urb->transfer_buffer + urb->actual_length);
        len = urb->transfer_buffer_length - urb->actual_length;

        sequence = usb_gettoggle(urb->dev,
                                 usb_pipeendpoint(urb->pipe),
                                 usb_pipeout(urb->pipe));

        dev_dbg(dev, "%s\n", __func__);
        usbhs_pkt_push(pipe, &ureq->pkt, usbhsh_queue_done,
                       buf, len, (urb->transfer_flags & URB_ZERO_PACKET),
                       sequence);

        usbhs_pkt_start(pipe);

        return 0;
}

static void usbhsh_queue_force_pop(struct usbhs_priv *priv,
                                   struct usbhs_pipe *pipe)
{
        struct usbhs_pkt *pkt;

        while (1) {
                pkt = usbhs_pkt_pop(pipe, NULL);
                if (!pkt)
                        break;

                /*
                 * if all packet are gone, usbhsh_endpoint_disable()
                 * will be called.
                 * then, attached device/endpoint/pipe will be detached
                 */
                usbhsh_queue_done(priv, pkt);
        }
}

static void usbhsh_queue_force_pop_all(struct usbhs_priv *priv)
{
        struct usbhs_pipe *pos;
        int i;

        usbhs_for_each_pipe_with_dcp(pos, priv, i)
                usbhsh_queue_force_pop(priv, pos);
}

/*
 *              DCP setup stage
 */
static int usbhsh_is_request_address(struct urb *urb)
{
        struct usb_ctrlrequest *req;

        req = (struct usb_ctrlrequest *)urb->setup_packet;

        if ((DeviceOutRequest    == req->bRequestType << 8) &&
            (USB_REQ_SET_ADDRESS == req->bRequest))
                return 1;
        else
                return 0;
}

static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv,
                                           struct urb *urb,
                                           struct usbhs_pipe *pipe)
{
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct usb_ctrlrequest req;
        struct device *dev = usbhs_priv_to_dev(priv);

        /*
         * wait setup packet ACK
         * see
         *      usbhsh_irq_setup_ack()
         *      usbhsh_irq_setup_err()
         */
        init_completion(&hpriv->setup_ack_done);

        /* copy original request */
        memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));

        /*
         * renesas_usbhs can not use original usb address.
         * see HARDWARE LIMITATION.
         * modify usb address here to use attached device.
         * see usbhsh_device_attach()
         */
        if (usbhsh_is_request_address(urb)) {
                struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
                struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv);

                /* udev is a attached device */
                req.wValue = usbhsh_device_number(hpriv, udev);
                dev_dbg(dev, "create new address - %d\n", req.wValue);
        }

        /* set request */
        usbhs_usbreq_set_val(priv, &req);

        /*
         * wait setup packet ACK
         */
        wait_for_completion(&hpriv->setup_ack_done);

        dev_dbg(dev, "%s done\n", __func__);
}

/*
 *              DCP data stage
 */
static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv,
                                          struct usbhs_pkt *pkt)
{
        struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
        struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);

        /* this ureq was connected to urb when usbhsh_urb_enqueue()  */

        usbhsh_ureq_free(hpriv, ureq);
}

static int usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv,
                                         struct urb *urb,
                                         struct usbhs_pipe *pipe,
                                         gfp_t mem_flags)

{
        struct usbhsh_request *ureq;

        /* this ureq will be freed on usbhsh_data_stage_packet_done() */
        ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
        if (unlikely(!ureq))
                return -ENOMEM;

        if (usb_pipein(urb->pipe))
                pipe->handler = &usbhs_dcp_data_stage_in_handler;
        else
                pipe->handler = &usbhs_dcp_data_stage_out_handler;

        usbhs_pkt_push(pipe, &ureq->pkt,
                       usbhsh_data_stage_packet_done,
                       urb->transfer_buffer,
                       urb->transfer_buffer_length,
                       (urb->transfer_flags & URB_ZERO_PACKET),
                       -1);

        return 0;
}

/*
 *              DCP status stage
 */
static int usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv,
                                            struct urb *urb,
                                            struct usbhs_pipe *pipe,
                                            gfp_t mem_flags)
{
        struct usbhsh_request *ureq;

        /* This ureq will be freed on usbhsh_queue_done() */
        ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
        if (unlikely(!ureq))
                return -ENOMEM;

        if (usb_pipein(urb->pipe))
                pipe->handler = &usbhs_dcp_status_stage_in_handler;
        else
                pipe->handler = &usbhs_dcp_status_stage_out_handler;

        usbhs_pkt_push(pipe, &ureq->pkt,
                       usbhsh_queue_done,
                       NULL,
                       urb->transfer_buffer_length,
                       0, -1);

        return 0;
}

static int usbhsh_dcp_queue_push(struct usb_hcd *hcd,
                                 struct urb *urb,
                                 gfp_t mflags)
{
        struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
        struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
        struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
        struct device *dev = usbhsh_hcd_to_dev(hcd);
        int ret;

        dev_dbg(dev, "%s\n", __func__);

        /*
         * setup stage
         *
         * usbhsh_send_setup_stage_packet() wait SACK/SIGN
         */
        usbhsh_setup_stage_packet_push(hpriv, urb, pipe);

        /*
         * data stage
         *
         * It is pushed only when urb has buffer.
         */
        if (urb->transfer_buffer_length) {
                ret = usbhsh_data_stage_packet_push(hpriv, urb, pipe, mflags);
                if (ret < 0) {
                        dev_err(dev, "data stage failed\n");
                        return ret;
                }
        }

        /*
         * status stage
         */
        ret = usbhsh_status_stage_packet_push(hpriv, urb, pipe, mflags);
        if (ret < 0) {
                dev_err(dev, "status stage failed\n");
                return ret;
        }

        /*
         * start pushed packets
         */
        usbhs_pkt_start(pipe);

        return 0;
}

/*
 *              dma map functions
 */
static int usbhsh_dma_map_ctrl(struct device *dma_dev, struct usbhs_pkt *pkt,
                               int map)
{
        if (map) {
                struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
                struct urb *urb = ureq->urb;

                /* it can not use scatter/gather */
                if (urb->num_sgs)
                        return -EINVAL;

                pkt->dma = urb->transfer_dma;
                if (!pkt->dma)
                        return -EINVAL;
        }

        return 0;
}

/*
 *              for hc_driver
 */
static int usbhsh_host_start(struct usb_hcd *hcd)
{
        return 0;
}

static void usbhsh_host_stop(struct usb_hcd *hcd)
{
}

static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
                              struct urb *urb,
                              gfp_t mem_flags)
{
        struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct device *dev = usbhs_priv_to_dev(priv);
        struct usb_host_endpoint *ep = urb->ep;
        struct usbhsh_device *new_udev = NULL;
        int is_dir_in = usb_pipein(urb->pipe);
        int ret;

        dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");

        if (!usbhsh_is_running(hpriv)) {
                ret = -EIO;
                dev_err(dev, "host is not running\n");
                goto usbhsh_urb_enqueue_error_not_linked;
        }

        ret = usb_hcd_link_urb_to_ep(hcd, urb);
        if (ret) {
                dev_err(dev, "urb link failed\n");
                goto usbhsh_urb_enqueue_error_not_linked;
        }

        /*
         * attach udev if needed
         * see [image of mod_host]
         */
        if (!usbhsh_device_get(hpriv, urb)) {
                new_udev = usbhsh_device_attach(hpriv, urb);
                if (!new_udev) {
                        ret = -EIO;
                        dev_err(dev, "device attach failed\n");
                        goto usbhsh_urb_enqueue_error_not_linked;
                }
        }

        /*
         * attach endpoint if needed
         * see [image of mod_host]
         */
        if (!usbhsh_ep_to_uep(ep)) {
                ret = usbhsh_endpoint_attach(hpriv, urb, mem_flags);
                if (ret < 0) {
                        dev_err(dev, "endpoint attach failed\n");
                        goto usbhsh_urb_enqueue_error_free_device;
                }
        }

        /*
         * attach pipe to endpoint

         * see [image of mod_host]
         */
        ret = usbhsh_pipe_attach(hpriv, urb);
        if (ret < 0) {
                dev_err(dev, "pipe attach failed\n");
                goto usbhsh_urb_enqueue_error_free_endpoint;
        }

        /*
         * push packet
         */
        if (usb_pipecontrol(urb->pipe))
                ret = usbhsh_dcp_queue_push(hcd, urb, mem_flags);
        else
                ret = usbhsh_queue_push(hcd, urb, mem_flags);

        return ret;

usbhsh_urb_enqueue_error_free_endpoint:
        usbhsh_endpoint_detach(hpriv, ep);
usbhsh_urb_enqueue_error_free_device:
        if (new_udev)
                usbhsh_device_detach(hpriv, new_udev);
usbhsh_urb_enqueue_error_not_linked:

        dev_dbg(dev, "%s error\n", __func__);

        return ret;
}

static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
        struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
        struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);

        if (ureq) {
                struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
                struct usbhs_pkt *pkt = &ureq->pkt;

                usbhs_pkt_pop(pkt->pipe, pkt);
                usbhsh_queue_done(priv, pkt);
        }

        return 0;
}

static void usbhsh_endpoint_disable(struct usb_hcd *hcd,
                                    struct usb_host_endpoint *ep)
{
        struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
        struct usbhsh_device *udev;
        struct usbhsh_hpriv *hpriv;

        /*
         * this function might be called manytimes by same hcd/ep
         * in-endpoint == out-endpoint if ep == dcp.
         */
        if (!uep)
                return;

        udev    = usbhsh_uep_to_udev(uep);
        hpriv   = usbhsh_hcd_to_hpriv(hcd);

        usbhsh_endpoint_detach(hpriv, ep);

        /*
         * if there is no endpoint,
         * free device
         */
        if (!usbhsh_device_has_endpoint(udev))
                usbhsh_device_detach(hpriv, udev);
}

static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
{
        struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
        int roothub_id = 1; /* only 1 root hub */

        /*
         * does port stat was changed ?
         * check USB_PORT_STAT_C_xxx << 16
         */
        if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000)
                *buf = (1 << roothub_id);
        else
                *buf = 0;

        return !!(*buf);
}

static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv,
                                    u16 typeReq, u16 wValue,
                                    u16 wIndex, char *buf, u16 wLength)
{
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct device *dev = usbhs_priv_to_dev(priv);

        switch (wValue) {
        case C_HUB_OVER_CURRENT:
        case C_HUB_LOCAL_POWER:
                dev_dbg(dev, "%s :: C_HUB_xx\n", __func__);
                return 0;
        }

        return -EPIPE;
}

static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv,
                                     u16 typeReq, u16 wValue,
                                     u16 wIndex, char *buf, u16 wLength)
{
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct device *dev = usbhs_priv_to_dev(priv);
        int enable = (typeReq == SetPortFeature);
        int speed, i, timeout = 128;
        int roothub_id = 1; /* only 1 root hub */

        /* common error */
        if (wIndex > roothub_id || wLength != 0)
                return -EPIPE;

        /* check wValue */
        switch (wValue) {
        case USB_PORT_FEAT_POWER:
                usbhs_vbus_ctrl(priv, enable);
                dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__);
                break;

        case USB_PORT_FEAT_ENABLE:
        case USB_PORT_FEAT_SUSPEND:
        case USB_PORT_FEAT_C_ENABLE:
        case USB_PORT_FEAT_C_SUSPEND:
        case USB_PORT_FEAT_C_CONNECTION:
        case USB_PORT_FEAT_C_OVER_CURRENT:
        case USB_PORT_FEAT_C_RESET:
                dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__);
                break;

        case USB_PORT_FEAT_RESET:
                if (!enable)
                        break;

                usbhsh_port_stat_clear(hpriv,
                                       USB_PORT_STAT_HIGH_SPEED |
                                       USB_PORT_STAT_LOW_SPEED);

                usbhsh_queue_force_pop_all(priv);

                usbhs_bus_send_reset(priv);
                msleep(20);
                usbhs_bus_send_sof_enable(priv);

                for (i = 0; i < timeout ; i++) {
                        switch (usbhs_bus_get_speed(priv)) {
                        case USB_SPEED_LOW:
                                speed = USB_PORT_STAT_LOW_SPEED;
                                goto got_usb_bus_speed;
                        case USB_SPEED_HIGH:
                                speed = USB_PORT_STAT_HIGH_SPEED;
                                goto got_usb_bus_speed;
                        case USB_SPEED_FULL:
                                speed = 0;
                                goto got_usb_bus_speed;
                        }

                        msleep(20);
                }
                return -EPIPE;

got_usb_bus_speed:
                usbhsh_port_stat_set(hpriv, speed);
                usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE);

                dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n",
                        __func__, speed);

                /* status change is not needed */
                return 0;

        default:
                return -EPIPE;
        }

        /* set/clear status */
        if (enable)
                usbhsh_port_stat_set(hpriv, (1 << wValue));
        else
                usbhsh_port_stat_clear(hpriv, (1 << wValue));

        return 0;
}

static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv,
                                   u16 typeReq, u16 wValue,
                                   u16 wIndex, char *buf, u16 wLength)
{
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
        struct device *dev = usbhs_priv_to_dev(priv);
        int roothub_id = 1; /* only 1 root hub */

        switch (typeReq) {
        case GetHubStatus:
                dev_dbg(dev, "%s :: GetHubStatus\n", __func__);

                *buf = 0x00;
                break;

        case GetPortStatus:
                if (wIndex != roothub_id)
                        return -EPIPE;

                dev_dbg(dev, "%s :: GetPortStatus\n", __func__);
                *(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv));
                break;

        case GetHubDescriptor:
                desc->bDescriptorType           = USB_DT_HUB;
                desc->bHubContrCurrent          = 0;
                desc->bNbrPorts                 = roothub_id;
                desc->bDescLength               = 9;
                desc->bPwrOn2PwrGood            = 0;
                desc->wHubCharacteristics       =
                        cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM);
                desc->u.hs.DeviceRemovable[0]   = (roothub_id << 1);
                desc->u.hs.DeviceRemovable[1]   = ~0;
                dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__);
                break;
        }

        return 0;
}

static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                              u16 wIndex, char *buf, u16 wLength)
{
        struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
        struct device *dev = usbhs_priv_to_dev(priv);
        int ret = -EPIPE;

        switch (typeReq) {

        /* Hub Feature */
        case ClearHubFeature:
        case SetHubFeature:
                ret = __usbhsh_hub_hub_feature(hpriv, typeReq,
                                               wValue, wIndex, buf, wLength);
                break;

        /* Port Feature */
        case SetPortFeature:
        case ClearPortFeature:
                ret = __usbhsh_hub_port_feature(hpriv, typeReq,
                                                wValue, wIndex, buf, wLength);
                break;

        /* Get status */
        case GetHubStatus:
        case GetPortStatus:
        case GetHubDescriptor:
                ret = __usbhsh_hub_get_status(hpriv, typeReq,
                                              wValue, wIndex, buf, wLength);
                break;
        }

        dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n",
                typeReq, ret, usbhsh_port_stat_get(hpriv));

        return ret;
}

static int usbhsh_bus_nop(struct usb_hcd *hcd)
{
        /* nothing to do */
        return 0;
}

static const struct hc_driver usbhsh_driver = {
        .description =          usbhsh_hcd_name,
        .hcd_priv_size =        sizeof(struct usbhsh_hpriv),

        /*
         * generic hardware linkage
         */
        .flags =                HCD_DMA | HCD_USB2,

        .start =                usbhsh_host_start,
        .stop =                 usbhsh_host_stop,

        /*
         * managing i/o requests and associated device resources
         */
        .urb_enqueue =          usbhsh_urb_enqueue,
        .urb_dequeue =          usbhsh_urb_dequeue,
        .endpoint_disable =     usbhsh_endpoint_disable,

        /*
         * root hub
         */
        .hub_status_data =      usbhsh_hub_status_data,
        .hub_control =          usbhsh_hub_control,
        .bus_suspend =          usbhsh_bus_nop,
        .bus_resume =           usbhsh_bus_nop,
};

/*
 *              interrupt functions
 */
static int usbhsh_irq_attch(struct usbhs_priv *priv,
                            struct usbhs_irq_state *irq_state)
{
        struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
        struct device *dev = usbhs_priv_to_dev(priv);

        dev_dbg(dev, "device attached\n");

        usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION);
        usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);

        /*
         * attch interrupt might happen infinitely on some device
         * (on self power USB hub ?)
         * disable it here.
         *
         * usbhsh_is_running() becomes effective
         * according to this process.
         * see
         *      usbhsh_is_running()
         *      usbhsh_urb_enqueue()
         */
        hpriv->mod.irq_attch = NULL;
        usbhs_irq_callback_update(priv, &hpriv->mod);

        return 0;
}

static int usbhsh_irq_dtch(struct usbhs_priv *priv,
                           struct usbhs_irq_state *irq_state)
{
        struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
        struct device *dev = usbhs_priv_to_dev(priv);

        dev_dbg(dev, "device detached\n");

        usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION);
        usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);

        /*
         * enable attch interrupt again
         *
         * usbhsh_is_running() becomes invalid
         * according to this process.
         * see
         *      usbhsh_is_running()
         *      usbhsh_urb_enqueue()
         */
        hpriv->mod.irq_attch = usbhsh_irq_attch;
        usbhs_irq_callback_update(priv, &hpriv->mod);

        /*
         * usbhsh_queue_force_pop_all() should be called
         * after usbhsh_is_running() becomes invalid.
         */
        usbhsh_queue_force_pop_all(priv);

        return 0;
}

static int usbhsh_irq_setup_ack(struct usbhs_priv *priv,
                                struct usbhs_irq_state *irq_state)
{
        struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
        struct device *dev = usbhs_priv_to_dev(priv);

        dev_dbg(dev, "setup packet OK\n");

        complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */

        return 0;
}

static int usbhsh_irq_setup_err(struct usbhs_priv *priv,
                                struct usbhs_irq_state *irq_state)
{
        struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
        struct device *dev = usbhs_priv_to_dev(priv);

        dev_dbg(dev, "setup packet Err\n");

        complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */

        return 0;
}

/*
 *              module start/stop
 */
static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv)
{
        struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
        struct usbhs_pipe *pipe;
        struct renesas_usbhs_driver_pipe_config *pipe_configs =
                                        usbhs_get_dparam(priv, pipe_configs);
        int pipe_size = usbhs_get_dparam(priv, pipe_size);
        int old_type, dir_in, i;

        /* init all pipe */
        old_type = USB_ENDPOINT_XFER_CONTROL;
        for (i = 0; i < pipe_size; i++) {

                /*
                 * data "output" will be finished as soon as possible,
                 * but there is no guaranty at data "input" case.
                 *
                 * "input" needs "standby" pipe.
                 * So, "input" direction pipe > "output" direction pipe
                 * is good idea.
                 *
                 * 1st USB_ENDPOINT_XFER_xxx will be output direction,
                 * and the other will be input direction here.
                 *
                 * ex)
                 * ...
                 * USB_ENDPOINT_XFER_ISOC -> dir out
                 * USB_ENDPOINT_XFER_ISOC -> dir in
                 * USB_ENDPOINT_XFER_BULK -> dir out
                 * USB_ENDPOINT_XFER_BULK -> dir in
                 * USB_ENDPOINT_XFER_BULK -> dir in
                 * ...
                 */
                dir_in = (pipe_configs[i].type == old_type);
                old_type = pipe_configs[i].type;

                if (USB_ENDPOINT_XFER_CONTROL == pipe_configs[i].type) {
                        pipe = usbhs_dcp_malloc(priv);
                        usbhsh_hpriv_to_dcp(hpriv) = pipe;
                } else {
                        pipe = usbhs_pipe_malloc(priv,
                                                 pipe_configs[i].type,
                                                 dir_in);
                }

                pipe->mod_private = NULL;
        }
}

static int usbhsh_start(struct usbhs_priv *priv)
{
        struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
        struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
        struct usbhs_mod *mod = usbhs_mod_get_current(priv);
        struct device *dev = usbhs_priv_to_dev(priv);
        int ret;

        /* add hcd */
        ret = usb_add_hcd(hcd, 0, 0);
        if (ret < 0)
                return 0;
        device_wakeup_enable(hcd->self.controller);

        /*
         * pipe initialize and enable DCP
         */
        usbhs_fifo_init(priv);
        usbhs_pipe_init(priv,
                        usbhsh_dma_map_ctrl);
        usbhsh_pipe_init_for_host(priv);

        /*
         * system config enble
         * - HI speed
         * - host
         * - usb module
         */
        usbhs_sys_host_ctrl(priv, 1);

        /*
         * enable irq callback
         */
        mod->irq_attch          = usbhsh_irq_attch;
        mod->irq_dtch           = usbhsh_irq_dtch;
        mod->irq_sack           = usbhsh_irq_setup_ack;
        mod->irq_sign           = usbhsh_irq_setup_err;
        usbhs_irq_callback_update(priv, mod);

        dev_dbg(dev, "start host\n");

        return ret;
}

static int usbhsh_stop(struct usbhs_priv *priv)
{
        struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
        struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
        struct usbhs_mod *mod = usbhs_mod_get_current(priv);
        struct device *dev = usbhs_priv_to_dev(priv);

        /*
         * disable irq callback
         */
        mod->irq_attch  = NULL;
        mod->irq_dtch   = NULL;
        mod->irq_sack   = NULL;
        mod->irq_sign   = NULL;
        usbhs_irq_callback_update(priv, mod);

        usb_remove_hcd(hcd);

        /* disable sys */
        usbhs_sys_host_ctrl(priv, 0);

        dev_dbg(dev, "quit host\n");

        return 0;
}

int usbhs_mod_host_probe(struct usbhs_priv *priv)
{
        struct usbhsh_hpriv *hpriv;
        struct usb_hcd *hcd;
        struct usbhsh_device *udev;
        struct device *dev = usbhs_priv_to_dev(priv);
        int i;

        /* initialize hcd */
        hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name);
        if (!hcd) {
                dev_err(dev, "Failed to create hcd\n");
                return -ENOMEM;
        }
        hcd->has_tt = 1; /* for low/full speed */

        /*
         * CAUTION
         *
         * There is no guarantee that it is possible to access usb module here.
         * Don't accesses to it.
         * The accesse will be enable after "usbhsh_start"
         */

        hpriv = usbhsh_hcd_to_hpriv(hcd);

        /*
         * register itself
         */
        usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST);

        /* init hpriv */
        hpriv->mod.name         = "host";
        hpriv->mod.start        = usbhsh_start;
        hpriv->mod.stop         = usbhsh_stop;
        usbhsh_port_stat_init(hpriv);

        /* init all device */
        usbhsh_for_each_udev_with_dev0(udev, hpriv, i) {
                udev->usbv      = NULL;
                INIT_LIST_HEAD(&udev->ep_list_head);
        }

        dev_info(dev, "host probed\n");

        return 0;
}

int usbhs_mod_host_remove(struct usbhs_priv *priv)
{
        struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
        struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);

        usb_put_hcd(hcd);

        return 0;
}