1/* SPDX-License-Identifier: BSD-3-Clause */ 2/* 3 usa90msg.h 4 5 Copyright (c) 1998-2003 InnoSys Incorporated. All Rights Reserved 6 This file is available under a BSD-style copyright 7 8 Keyspan USB Async Message Formats for the USA19HS 9 10 Redistribution and use in source and binary forms, with or without 11 modification, are permitted provided that the following conditions are 12 met: 13 14 1. Redistributions of source code must retain this licence text 15 without modification, this list of conditions, and the following 16 disclaimer. The following copyright notice must appear immediately at 17 the beginning of all source files: 18 19 Copyright (c) 1998-2003 InnoSys Incorporated. All Rights Reserved 20 21 This file is available under a BSD-style copyright 22 23 2. The name of InnoSys Incorporated may not be used to endorse or promote 24 products derived from this software without specific prior written 25 permission. 26 27 THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR 28 IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 29 OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 30 NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 31 INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 32 (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 33 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 34 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 35 LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 36 OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 37 SUCH DAMAGE. 38 39 Revisions: 40 41 2003feb14 add setTxMode/txMode and cancelRxXoff to portControl 42 2003mar21 change name of PARITY_0/1 to add MARK/SPACE 43*/ 44 45#ifndef __USA90MSG__ 46#define __USA90MSG__ 47 48struct keyspan_usa90_portControlMessage 49{ 50 /* 51 there are three types of "commands" sent in the control message: 52 53 1. configuration changes which must be requested by setting 54 the corresponding "set" flag (and should only be requested 55 when necessary, to reduce overhead on the device): 56 */ 57 58 u8 setClocking, // host requests baud rate be set 59 baudLo, // host does baud divisor calculation 60 baudHi, // host does baud divisor calculation 61 62 setLcr, // host requests lcr be set 63 lcr, // use PARITY, STOPBITS, DATABITS below 64 65 setRxMode, // set receive mode 66 rxMode, // RXMODE_DMA or RXMODE_BYHAND 67 68 setTxMode, // set transmit mode 69 txMode, // TXMODE_DMA or TXMODE_BYHAND 70 71 setTxFlowControl, // host requests tx flow control be set 72 txFlowControl , // use TX_FLOW... bits below 73 setRxFlowControl, // host requests rx flow control be set 74 rxFlowControl, // use RX_FLOW... bits below 75 sendXoff, // host requests XOFF transmitted immediately 76 sendXon, // host requests XON char transmitted 77 xonChar, // specified in current character format 78 xoffChar, // specified in current character format 79 80 sendChar, // host requests char transmitted immediately 81 txChar, // character to send 82 83 setRts, // host requests RTS output be set 84 rts, // 1=on, 0=off 85 setDtr, // host requests DTR output be set 86 dtr; // 1=on, 0=off 87 88 89 /* 90 2. configuration data which is simply used as is 91 and must be specified correctly in every host message. 92 */ 93 94 u8 rxForwardingLength, // forward when this number of chars available 95 rxForwardingTimeout, // (1-31 in ms) 96 txAckSetting; // 0=don't ack, 1=normal, 2-255 TBD... 97 /* 98 3. Firmware states which cause actions if they change 99 and must be specified correctly in every host message. 100 */ 101 102 u8 portEnabled, // 0=disabled, 1=enabled 103 txFlush, // 0=normal, 1=toss outbound data 104 txBreak, // 0=break off, 1=break on 105 loopbackMode; // 0=no loopback, 1=loopback enabled 106 107 /* 108 4. commands which are flags only; these are processed in order 109 (so that, e.g., if rxFlush and rxForward flags are set, the 110 port will have no data to forward); any non-zero value 111 is respected 112 */ 113 114 u8 rxFlush, // toss inbound data 115 rxForward, // forward all inbound data, NOW (as if fwdLen==1) 116 cancelRxXoff, // cancel any receive XOFF state (_txXoff) 117 returnStatus; // return current status NOW 118}; 119 120// defines for bits in lcr 121#define USA_DATABITS_5 0x00 122#define USA_DATABITS_6 0x01 123#define USA_DATABITS_7 0x02 124#define USA_DATABITS_8 0x03 125#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes 126#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte 127#define STOPBITS_678_2 0x04 // 2 stop bits for 6-8 bit byte 128#define USA_PARITY_NONE 0x00 129#define USA_PARITY_ODD 0x08 130#define USA_PARITY_EVEN 0x18 131#define PARITY_MARK_1 0x28 // force parity MARK 132#define PARITY_SPACE_0 0x38 // force parity SPACE 133 134#define TXFLOW_CTS 0x04 135#define TXFLOW_DSR 0x08 136#define TXFLOW_XOFF 0x01 137#define TXFLOW_XOFF_ANY 0x02 138#define TXFLOW_XOFF_BITS (TXFLOW_XOFF | TXFLOW_XOFF_ANY) 139 140#define RXFLOW_XOFF 0x10 141#define RXFLOW_RTS 0x20 142#define RXFLOW_DTR 0x40 143#define RXFLOW_DSR_SENSITIVITY 0x80 144 145#define RXMODE_BYHAND 0x00 146#define RXMODE_DMA 0x02 147 148#define TXMODE_BYHAND 0x00 149#define TXMODE_DMA 0x02 150 151 152// all things called "StatusMessage" are sent on the status endpoint 153 154struct keyspan_usa90_portStatusMessage 155{ 156 u8 msr, // reports the actual MSR register 157 cts, // reports CTS pin 158 dcd, // reports DCD pin 159 dsr, // reports DSR pin 160 ri, // reports RI pin 161 _txXoff, // port is in XOFF state (we received XOFF) 162 rxBreak, // reports break state 163 rxOverrun, // count of overrun errors (since last reported) 164 rxParity, // count of parity errors (since last reported) 165 rxFrame, // count of frame errors (since last reported) 166 portState, // PORTSTATE_xxx bits (useful for debugging) 167 messageAck, // message acknowledgement 168 charAck, // character acknowledgement 169 controlResponse; // (value = returnStatus) a control message has been processed 170}; 171 172// bits in RX data message when STAT byte is included 173 174#define RXERROR_OVERRUN 0x02 175#define RXERROR_PARITY 0x04 176#define RXERROR_FRAMING 0x08 177#define RXERROR_BREAK 0x10 178 179#define PORTSTATE_ENABLED 0x80 180#define PORTSTATE_TXFLUSH 0x01 181#define PORTSTATE_TXBREAK 0x02 182#define PORTSTATE_LOOPBACK 0x04 183 184// MSR bits 185 186#define USA_MSR_dCTS 0x01 // CTS has changed since last report 187#define USA_MSR_dDSR 0x02 188#define USA_MSR_dRI 0x04 189#define USA_MSR_dDCD 0x08 190 191#define USA_MSR_CTS 0x10 // current state of CTS 192#define USA_MSR_DSR 0x20 193#define USA_USA_MSR_RI 0x40 194#define MSR_DCD 0x80 195 196// ie: the maximum length of an endpoint buffer 197#define MAX_DATA_LEN 64 198 199#endif 200