// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2006-2007 Silicon Graphics, Inc.
 * All Rights Reserved.
 */
#include "xfs.h"
#include "xfs_mru_cache.h"

/*
 * The MRU Cache data structure consists of a data store, an array of lists and
 * a lock to protect its internal state.  At initialisation time, the client
 * supplies an element lifetime in milliseconds and a group count, as well as a
 * function pointer to call when deleting elements.  A data structure for
 * queueing up work in the form of timed callbacks is also included.
 *
 * The group count controls how many lists are created, and thereby how finely
 * the elements are grouped in time.  When reaping occurs, all the elements in
 * all the lists whose time has expired are deleted.
 *
 * To give an example of how this works in practice, consider a client that
 * initialises an MRU Cache with a lifetime of ten seconds and a group count of
 * five.  Five internal lists will be created, each representing a two second
 * period in time.  When the first element is added, time zero for the data
 * structure is initialised to the current time.
 *
 * All the elements added in the first two seconds are appended to the first
 * list.  Elements added in the third second go into the second list, and so on.
 * If an element is accessed at any point, it is removed from its list and
 * inserted at the head of the current most-recently-used list.
 *
 * The reaper function will have nothing to do until at least twelve seconds
 * have elapsed since the first element was added.  The reason for this is that
 * if it were called at t=11s, there could be elements in the first list that
 * have only been inactive for nine seconds, so it still does nothing.  If it is
 * called anywhere between t=12 and t=14 seconds, it will delete all the
 * elements that remain in the first list.  It's therefore possible for elements
 * to remain in the data store even after they've been inactive for up to
 * (t + t/g) seconds, where t is the inactive element lifetime and g is the
 * number of groups.
 *
 * The above example assumes that the reaper function gets called at least once
 * every (t/g) seconds.  If it is called less frequently, unused elements will
 * accumulate in the reap list until the reaper function is eventually called.
 * The current implementation uses work queue callbacks to carefully time the
 * reaper function calls, so this should happen rarely, if at all.
 *
 * From a design perspective, the primary reason for the choice of a list array
 * representing discrete time intervals is that it's only practical to reap
 * expired elements in groups of some appreciable size.  This automatically
 * introduces a granularity to element lifetimes, so there's no point storing an
 * individual timeout with each element that specifies a more precise reap time.
 * The bonus is a saving of sizeof(long) bytes of memory per element stored.
 *
 * The elements could have been stored in just one list, but an array of
 * counters or pointers would need to be maintained to allow them to be divided
 * up into discrete time groups.  More critically, the process of touching or
 * removing an element would involve walking large portions of the entire list,
 * which would have a detrimental effect on performance.  The additional memory
 * requirement for the array of list heads is minimal.
 *
 * When an element is touched or deleted, it needs to be removed from its
 * current list.  Doubly linked lists are used to make the list maintenance
 * portion of these operations O(1).  Since reaper timing can be imprecise,
 * inserts and lookups can occur when there are no free lists available.  When
 * this happens, all the elements on the LRU list need to be migrated to the end
 * of the reap list.  To keep the list maintenance portion of these operations
 * O(1) also, list tails need to be accessible without walking the entire list.
 * This is the reason why doubly linked list heads are used.
 */

/*
 * An MRU Cache is a dynamic data structure that stores its elements in a way
 * that allows efficient lookups, but also groups them into discrete time
 * intervals based on insertion time.  This allows elements to be efficiently
 * and automatically reaped after a fixed period of inactivity.
 *
 * When a client data pointer is stored in the MRU Cache it needs to be added to
 * both the data store and to one of the lists.  It must also be possible to
 * access each of these entries via the other, i.e. to:
 *
 *    a) Walk a list, removing the corresponding data store entry for each item.
 *    b) Look up a data store entry, then access its list entry directly.
 *
 * To achieve both of these goals, each entry must contain both a list entry and
 * a key, in addition to the user's data pointer.  Note that it's not a good
 * idea to have the client embed one of these structures at the top of their own
 * data structure, because inserting the same item more than once would most
 * likely result in a loop in one of the lists.  That's a sure-fire recipe for
 * an infinite loop in the code.
 */
struct xfs_mru_cache {
        struct radix_tree_root  store;     /* Core storage data structure.  */
        struct list_head        *lists;    /* Array of lists, one per grp.  */
        struct list_head        reap_list; /* Elements overdue for reaping. */
        spinlock_t              lock;      /* Lock to protect this struct.  */
        unsigned int            grp_count; /* Number of discrete groups.    */
        unsigned int            grp_time;  /* Time period spanned by grps.  */
        unsigned int            lru_grp;   /* Group containing time zero.   */
        unsigned long           time_zero; /* Time first element was added. */
        xfs_mru_cache_free_func_t free_func; /* Function pointer for freeing. */
        struct delayed_work     work;      /* Workqueue data for reaping.   */
        unsigned int            queued;    /* work has been queued */
        void                    *data;
};

static struct workqueue_struct  *xfs_mru_reap_wq;

/*
 * When inserting, destroying or reaping, it's first necessary to update the
 * lists relative to a particular time.  In the case of destroying, that time
 * will be well in the future to ensure that all items are moved to the reap
 * list.  In all other cases though, the time will be the current time.
 *
 * This function enters a loop, moving the contents of the LRU list to the reap
 * list again and again until either a) the lists are all empty, or b) time zero
 * has been advanced sufficiently to be within the immediate element lifetime.
 *
 * Case a) above is detected by counting how many groups are migrated and
 * stopping when they've all been moved.  Case b) is detected by monitoring the
 * time_zero field, which is updated as each group is migrated.
 *
 * The return value is the earliest time that more migration could be needed, or
 * zero if there's no need to schedule more work because the lists are empty.
 */
STATIC unsigned long
_xfs_mru_cache_migrate(
        struct xfs_mru_cache    *mru,
        unsigned long           now)
{
        unsigned int            grp;
        unsigned int            migrated = 0;
        struct list_head        *lru_list;

        /* Nothing to do if the data store is empty. */
        if (!mru->time_zero)
                return 0;

        /* While time zero is older than the time spanned by all the lists. */
        while (mru->time_zero <= now - mru->grp_count * mru->grp_time) {

                /*
                 * If the LRU list isn't empty, migrate its elements to the tail
                 * of the reap list.
                 */
                lru_list = mru->lists + mru->lru_grp;
                if (!list_empty(lru_list))
                        list_splice_init(lru_list, mru->reap_list.prev);

                /*
                 * Advance the LRU group number, freeing the old LRU list to
                 * become the new MRU list; advance time zero accordingly.
                 */
                mru->lru_grp = (mru->lru_grp + 1) % mru->grp_count;
                mru->time_zero += mru->grp_time;

                /*
                 * If reaping is so far behind that all the elements on all the
                 * lists have been migrated to the reap list, it's now empty.
                 */
                if (++migrated == mru->grp_count) {
                        mru->lru_grp = 0;
                        mru->time_zero = 0;
                        return 0;
                }
        }

        /* Find the first non-empty list from the LRU end. */
        for (grp = 0; grp < mru->grp_count; grp++) {

                /* Check the grp'th list from the LRU end. */
                lru_list = mru->lists + ((mru->lru_grp + grp) % mru->grp_count);
                if (!list_empty(lru_list))
                        return mru->time_zero +
                               (mru->grp_count + grp) * mru->grp_time;
        }

        /* All the lists must be empty. */
        mru->lru_grp = 0;
        mru->time_zero = 0;
        return 0;
}

/*
 * When inserting or doing a lookup, an element needs to be inserted into the
 * MRU list.  The lists must be migrated first to ensure that they're
 * up-to-date, otherwise the new element could be given a shorter lifetime in
 * the cache than it should.
 */
STATIC void
_xfs_mru_cache_list_insert(
        struct xfs_mru_cache    *mru,
        struct xfs_mru_cache_elem *elem)
{
        unsigned int            grp = 0;
        unsigned long           now = jiffies;

        /*
         * If the data store is empty, initialise time zero, leave grp set to
         * zero and start the work queue timer if necessary.  Otherwise, set grp
         * to the number of group times that have elapsed since time zero.
         */
        if (!_xfs_mru_cache_migrate(mru, now)) {
                mru->time_zero = now;
                if (!mru->queued) {
                        mru->queued = 1;
                        queue_delayed_work(xfs_mru_reap_wq, &mru->work,
                                           mru->grp_count * mru->grp_time);
                }
        } else {
                grp = (now - mru->time_zero) / mru->grp_time;
                grp = (mru->lru_grp + grp) % mru->grp_count;
        }

        /* Insert the element at the tail of the corresponding list. */
        list_add_tail(&elem->list_node, mru->lists + grp);
}

/*
 * When destroying or reaping, all the elements that were migrated to the reap
 * list need to be deleted.  For each element this involves removing it from the
 * data store, removing it from the reap list, calling the client's free
 * function and deleting the element from the element zone.
 *
 * We get called holding the mru->lock, which we drop and then reacquire.
 * Sparse need special help with this to tell it we know what we are doing.
 */
STATIC void
_xfs_mru_cache_clear_reap_list(
        struct xfs_mru_cache    *mru)
                __releases(mru->lock) __acquires(mru->lock)
{
        struct xfs_mru_cache_elem *elem, *next;
        struct list_head        tmp;

        INIT_LIST_HEAD(&tmp);
        list_for_each_entry_safe(elem, next, &mru->reap_list, list_node) {

                /* Remove the element from the data store. */
                radix_tree_delete(&mru->store, elem->key);

                /*
                 * remove to temp list so it can be freed without
                 * needing to hold the lock
                 */
                list_move(&elem->list_node, &tmp);
        }
        spin_unlock(&mru->lock);

        list_for_each_entry_safe(elem, next, &tmp, list_node) {
                list_del_init(&elem->list_node);
                mru->free_func(mru->data, elem);
        }

        spin_lock(&mru->lock);
}

/*
 * We fire the reap timer every group expiry interval so
 * we always have a reaper ready to run. This makes shutdown
 * and flushing of the reaper easy to do. Hence we need to
 * keep when the next reap must occur so we can determine
 * at each interval whether there is anything we need to do.
 */
STATIC void
_xfs_mru_cache_reap(
        struct work_struct      *work)
{
        struct xfs_mru_cache    *mru =
                container_of(work, struct xfs_mru_cache, work.work);
        unsigned long           now, next;

        ASSERT(mru && mru->lists);
        if (!mru || !mru->lists)
                return;

        spin_lock(&mru->lock);
        next = _xfs_mru_cache_migrate(mru, jiffies);
        _xfs_mru_cache_clear_reap_list(mru);

        mru->queued = next;
        if ((mru->queued > 0)) {
                now = jiffies;
                if (next <= now)
                        next = 0;
                else
                        next -= now;
                queue_delayed_work(xfs_mru_reap_wq, &mru->work, next);
        }

        spin_unlock(&mru->lock);
}

int
xfs_mru_cache_init(void)
{
        xfs_mru_reap_wq = alloc_workqueue("xfs_mru_cache",
                        XFS_WQFLAGS(WQ_MEM_RECLAIM | WQ_FREEZABLE), 1);
        if (!xfs_mru_reap_wq)
                return -ENOMEM;
        return 0;
}

void
xfs_mru_cache_uninit(void)
{
        destroy_workqueue(xfs_mru_reap_wq);
}

/*
 * To initialise a struct xfs_mru_cache pointer, call xfs_mru_cache_create()
 * with the address of the pointer, a lifetime value in milliseconds, a group
 * count and a free function to use when deleting elements.  This function
 * returns 0 if the initialisation was successful.
 */
int
xfs_mru_cache_create(
        struct xfs_mru_cache    **mrup,
        void                    *data,
        unsigned int            lifetime_ms,
        unsigned int            grp_count,
        xfs_mru_cache_free_func_t free_func)
{
        struct xfs_mru_cache    *mru = NULL;
        int                     err = 0, grp;
        unsigned int            grp_time;

        if (mrup)
                *mrup = NULL;

        if (!mrup || !grp_count || !lifetime_ms || !free_func)
                return -EINVAL;

        if (!(grp_time = msecs_to_jiffies(lifetime_ms) / grp_count))
                return -EINVAL;

        if (!(mru = kmem_zalloc(sizeof(*mru), 0)))
                return -ENOMEM;

        /* An extra list is needed to avoid reaping up to a grp_time early. */
        mru->grp_count = grp_count + 1;
        mru->lists = kmem_zalloc(mru->grp_count * sizeof(*mru->lists), 0);

        if (!mru->lists) {
                err = -ENOMEM;
                goto exit;
        }

        for (grp = 0; grp < mru->grp_count; grp++)
                INIT_LIST_HEAD(mru->lists + grp);

        /*
         * We use GFP_KERNEL radix tree preload and do inserts under a
         * spinlock so GFP_ATOMIC is appropriate for the radix tree itself.
         */
        INIT_RADIX_TREE(&mru->store, GFP_ATOMIC);
        INIT_LIST_HEAD(&mru->reap_list);
        spin_lock_init(&mru->lock);
        INIT_DELAYED_WORK(&mru->work, _xfs_mru_cache_reap);

        mru->grp_time  = grp_time;
        mru->free_func = free_func;
        mru->data = data;
        *mrup = mru;

exit:
        if (err && mru && mru->lists)
                kmem_free(mru->lists);
        if (err && mru)
                kmem_free(mru);

        return err;
}

/*
 * Call xfs_mru_cache_flush() to flush out all cached entries, calling their
 * free functions as they're deleted.  When this function returns, the caller is
 * guaranteed that all the free functions for all the elements have finished
 * executing and the reaper is not running.
 */
static void
xfs_mru_cache_flush(
        struct xfs_mru_cache    *mru)
{
        if (!mru || !mru->lists)
                return;

        spin_lock(&mru->lock);
        if (mru->queued) {
                spin_unlock(&mru->lock);
                cancel_delayed_work_sync(&mru->work);
                spin_lock(&mru->lock);
        }

        _xfs_mru_cache_migrate(mru, jiffies + mru->grp_count * mru->grp_time);
        _xfs_mru_cache_clear_reap_list(mru);

        spin_unlock(&mru->lock);
}

void
xfs_mru_cache_destroy(
        struct xfs_mru_cache    *mru)
{
        if (!mru || !mru->lists)
                return;

        xfs_mru_cache_flush(mru);

        kmem_free(mru->lists);
        kmem_free(mru);
}

/*
 * To insert an element, call xfs_mru_cache_insert() with the data store, the
 * element's key and the client data pointer.  This function returns 0 on
 * success or ENOMEM if memory for the data element couldn't be allocated.
 */
int
xfs_mru_cache_insert(
        struct xfs_mru_cache    *mru,
        unsigned long           key,
        struct xfs_mru_cache_elem *elem)
{
        int                     error;

        ASSERT(mru && mru->lists);
        if (!mru || !mru->lists)
                return -EINVAL;

        if (radix_tree_preload(GFP_NOFS))
                return -ENOMEM;

        INIT_LIST_HEAD(&elem->list_node);
        elem->key = key;

        spin_lock(&mru->lock);
        error = radix_tree_insert(&mru->store, key, elem);
        radix_tree_preload_end();
        if (!error)
                _xfs_mru_cache_list_insert(mru, elem);
        spin_unlock(&mru->lock);

        return error;
}

/*
 * To remove an element without calling the free function, call
 * xfs_mru_cache_remove() with the data store and the element's key.  On success
 * the client data pointer for the removed element is returned, otherwise this
 * function will return a NULL pointer.
 */
struct xfs_mru_cache_elem *
xfs_mru_cache_remove(
        struct xfs_mru_cache    *mru,
        unsigned long           key)
{
        struct xfs_mru_cache_elem *elem;

        ASSERT(mru && mru->lists);
        if (!mru || !mru->lists)
                return NULL;

        spin_lock(&mru->lock);
        elem = radix_tree_delete(&mru->store, key);
        if (elem)
                list_del(&elem->list_node);
        spin_unlock(&mru->lock);

        return elem;
}

/*
 * To remove and element and call the free function, call xfs_mru_cache_delete()
 * with the data store and the element's key.
 */
void
xfs_mru_cache_delete(
        struct xfs_mru_cache    *mru,
        unsigned long           key)
{
        struct xfs_mru_cache_elem *elem;

        elem = xfs_mru_cache_remove(mru, key);
        if (elem)
                mru->free_func(mru->data, elem);
}

/*
 * To look up an element using its key, call xfs_mru_cache_lookup() with the
 * data store and the element's key.  If found, the element will be moved to the
 * head of the MRU list to indicate that it's been touched.
 *
 * The internal data structures are protected by a spinlock that is STILL HELD
 * when this function returns.  Call xfs_mru_cache_done() to release it.  Note
 * that it is not safe to call any function that might sleep in the interim.
 *
 * The implementation could have used reference counting to avoid this
 * restriction, but since most clients simply want to get, set or test a member
 * of the returned data structure, the extra per-element memory isn't warranted.
 *
 * If the element isn't found, this function returns NULL and the spinlock is
 * released.  xfs_mru_cache_done() should NOT be called when this occurs.
 *
 * Because sparse isn't smart enough to know about conditional lock return
 * status, we need to help it get it right by annotating the path that does
 * not release the lock.
 */
struct xfs_mru_cache_elem *
xfs_mru_cache_lookup(
        struct xfs_mru_cache    *mru,
        unsigned long           key)
{
        struct xfs_mru_cache_elem *elem;

        ASSERT(mru && mru->lists);
        if (!mru || !mru->lists)
                return NULL;

        spin_lock(&mru->lock);
        elem = radix_tree_lookup(&mru->store, key);
        if (elem) {
                list_del(&elem->list_node);
                _xfs_mru_cache_list_insert(mru, elem);
                __release(mru_lock); /* help sparse not be stupid */
        } else
                spin_unlock(&mru->lock);

        return elem;
}

/*
 * To release the internal data structure spinlock after having performed an
 * xfs_mru_cache_lookup() or an xfs_mru_cache_peek(), call xfs_mru_cache_done()
 * with the data store pointer.
 */
void
xfs_mru_cache_done(
        struct xfs_mru_cache    *mru)
                __releases(mru->lock)
{
        spin_unlock(&mru->lock);
}