linux/include/linux/mfd/si476x-core.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0-only */
   2/*
   3 * include/media/si476x-core.h -- Common definitions for si476x core
   4 * device
   5 *
   6 * Copyright (C) 2012 Innovative Converged Devices(ICD)
   7 * Copyright (C) 2013 Andrey Smirnov
   8 *
   9 * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
  10 */
  11
  12#ifndef SI476X_CORE_H
  13#define SI476X_CORE_H
  14
  15#include <linux/kfifo.h>
  16#include <linux/atomic.h>
  17#include <linux/i2c.h>
  18#include <linux/regmap.h>
  19#include <linux/mutex.h>
  20#include <linux/mfd/core.h>
  21#include <linux/videodev2.h>
  22#include <linux/regulator/consumer.h>
  23
  24#include <linux/mfd/si476x-platform.h>
  25#include <linux/mfd/si476x-reports.h>
  26
  27/* Command Timeouts */
  28#define SI476X_DEFAULT_TIMEOUT  100000
  29#define SI476X_TIMEOUT_TUNE     700000
  30#define SI476X_TIMEOUT_POWER_UP 330000
  31#define SI476X_STATUS_POLL_US   0
  32
  33/* -------------------- si476x-i2c.c ----------------------- */
  34
  35enum si476x_freq_supported_chips {
  36        SI476X_CHIP_SI4761 = 1,
  37        SI476X_CHIP_SI4764,
  38        SI476X_CHIP_SI4768,
  39};
  40
  41enum si476x_part_revisions {
  42        SI476X_REVISION_A10 = 0,
  43        SI476X_REVISION_A20 = 1,
  44        SI476X_REVISION_A30 = 2,
  45};
  46
  47enum si476x_mfd_cells {
  48        SI476X_RADIO_CELL = 0,
  49        SI476X_CODEC_CELL,
  50        SI476X_MFD_CELLS,
  51};
  52
  53/**
  54 * enum si476x_power_state - possible power state of the si476x
  55 * device.
  56 *
  57 * @SI476X_POWER_DOWN: In this state all regulators are turned off
  58 * and the reset line is pulled low. The device is completely
  59 * inactive.
  60 * @SI476X_POWER_UP_FULL: In this state all the power regulators are
  61 * turned on, reset line pulled high, IRQ line is enabled(polling is
  62 * active for polling use scenario) and device is turned on with
  63 * POWER_UP command. The device is ready to be used.
  64 * @SI476X_POWER_INCONSISTENT: This state indicates that previous
  65 * power down was inconsistent, meaning some of the regulators were
  66 * not turned down and thus use of the device, without power-cycling
  67 * is impossible.
  68 */
  69enum si476x_power_state {
  70        SI476X_POWER_DOWN               = 0,
  71        SI476X_POWER_UP_FULL            = 1,
  72        SI476X_POWER_INCONSISTENT       = 2,
  73};
  74
  75/**
  76 * struct si476x_core - internal data structure representing the
  77 * underlying "core" device which all the MFD cell-devices use.
  78 *
  79 * @client: Actual I2C client used to transfer commands to the chip.
  80 * @chip_id: Last digit of the chip model(E.g. "1" for SI4761)
  81 * @cells: MFD cell devices created by this driver.
  82 * @cmd_lock: Mutex used to serialize all the requests to the core
  83 * device. This filed should not be used directly. Instead
  84 * si476x_core_lock()/si476x_core_unlock() should be used to get
  85 * exclusive access to the "core" device.
  86 * @users: Active users counter(Used by the radio cell)
  87 * @rds_read_queue: Wait queue used to wait for RDS data.
  88 * @rds_fifo: FIFO in which all the RDS data received from the chip is
  89 * placed.
  90 * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO.
  91 * @rds_drainer_is_working: Flag used for launching only one instance
  92 * of the @rds_fifo_drainer.
  93 * @rds_drainer_status_lock: Lock used to guard access to the
  94 * @rds_drainer_is_working variable.
  95 * @command: Wait queue for wainting on the command comapletion.
  96 * @cts: Clear To Send flag set upon receiving first status with CTS
  97 * set.
  98 * @tuning: Wait queue used for wainting for tune/seek comand
  99 * completion.
 100 * @stc: Similar to @cts, but for the STC bit of the status value.
 101 * @power_up_parameters: Parameters used as argument for POWER_UP
 102 * command when the device is started.
 103 * @state: Current power state of the device.
 104 * @supplues: Structure containing handles to all power supplies used
 105 * by the device (NULL ones are ignored).
 106 * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip.
 107 * @pinmux: Chip's configurable pins configuration.
 108 * @diversity_mode: Chips role when functioning in diversity mode.
 109 * @status_monitor: Polling worker used in polling use case scenarion
 110 * (when IRQ is not avalible).
 111 * @revision: Chip's running firmware revision number(Used for correct
 112 * command set support).
 113 */
 114
 115struct si476x_core {
 116        struct i2c_client *client;
 117        struct regmap *regmap;
 118        int chip_id;
 119        struct mfd_cell cells[SI476X_MFD_CELLS];
 120
 121        struct mutex cmd_lock; /* for serializing fm radio operations */
 122        atomic_t users;
 123
 124        wait_queue_head_t  rds_read_queue;
 125        struct kfifo       rds_fifo;
 126        struct work_struct rds_fifo_drainer;
 127        bool               rds_drainer_is_working;
 128        struct mutex       rds_drainer_status_lock;
 129
 130        wait_queue_head_t command;
 131        atomic_t          cts;
 132
 133        wait_queue_head_t tuning;
 134        atomic_t          stc;
 135
 136        struct si476x_power_up_args power_up_parameters;
 137
 138        enum si476x_power_state power_state;
 139
 140        struct regulator_bulk_data supplies[4];
 141
 142        int gpio_reset;
 143
 144        struct si476x_pinmux pinmux;
 145        enum si476x_phase_diversity_mode diversity_mode;
 146
 147        atomic_t is_alive;
 148
 149        struct delayed_work status_monitor;
 150#define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w), \
 151                                            struct si476x_core, \
 152                                            status_monitor)
 153
 154        int revision;
 155
 156        int rds_fifo_depth;
 157};
 158
 159static inline struct si476x_core *i2c_mfd_cell_to_core(struct device *dev)
 160{
 161        struct i2c_client *client = to_i2c_client(dev->parent);
 162        return i2c_get_clientdata(client);
 163}
 164
 165
 166/**
 167 * si476x_core_lock() - lock the core device to get an exclusive access
 168 * to it.
 169 */
 170static inline void si476x_core_lock(struct si476x_core *core)
 171{
 172        mutex_lock(&core->cmd_lock);
 173}
 174
 175/**
 176 * si476x_core_unlock() - unlock the core device to relinquish an
 177 * exclusive access to it.
 178 */
 179static inline void si476x_core_unlock(struct si476x_core *core)
 180{
 181        mutex_unlock(&core->cmd_lock);
 182}
 183
 184/* *_TUNE_FREQ family of commands accept frequency in multiples of
 185    10kHz */
 186static inline u16 hz_to_si476x(struct si476x_core *core, int freq)
 187{
 188        u16 result;
 189
 190        switch (core->power_up_parameters.func) {
 191        default:
 192        case SI476X_FUNC_FM_RECEIVER:
 193                result = freq / 10000;
 194                break;
 195        case SI476X_FUNC_AM_RECEIVER:
 196                result = freq / 1000;
 197                break;
 198        }
 199
 200        return result;
 201}
 202
 203static inline int si476x_to_hz(struct si476x_core *core, u16 freq)
 204{
 205        int result;
 206
 207        switch (core->power_up_parameters.func) {
 208        default:
 209        case SI476X_FUNC_FM_RECEIVER:
 210                result = freq * 10000;
 211                break;
 212        case SI476X_FUNC_AM_RECEIVER:
 213                result = freq * 1000;
 214                break;
 215        }
 216
 217        return result;
 218}
 219
 220/* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem
 221 * mesures frequency in 62.5 Hz units */
 222
 223static inline int hz_to_v4l2(int freq)
 224{
 225        return (freq * 10) / 625;
 226}
 227
 228static inline int v4l2_to_hz(int freq)
 229{
 230        return (freq * 625) / 10;
 231}
 232
 233static inline u16 v4l2_to_si476x(struct si476x_core *core, int freq)
 234{
 235        return hz_to_si476x(core, v4l2_to_hz(freq));
 236}
 237
 238static inline int si476x_to_v4l2(struct si476x_core *core, u16 freq)
 239{
 240        return hz_to_v4l2(si476x_to_hz(core, freq));
 241}
 242
 243
 244
 245/**
 246 * struct si476x_func_info - structure containing result of the
 247 * FUNC_INFO command.
 248 *
 249 * @firmware.major: Firmware major number.
 250 * @firmware.minor[...]: Firmware minor numbers.
 251 * @patch_id:
 252 * @func: Mode tuner is working in.
 253 */
 254struct si476x_func_info {
 255        struct {
 256                u8 major, minor[2];
 257        } firmware;
 258        u16 patch_id;
 259        enum si476x_func func;
 260};
 261
 262/**
 263 * struct si476x_power_down_args - structure used to pass parameters
 264 * to POWER_DOWN command
 265 *
 266 * @xosc: true - Power down, but leav oscillator running.
 267 *        false - Full power down.
 268 */
 269struct si476x_power_down_args {
 270        bool xosc;
 271};
 272
 273/**
 274 * enum si476x_tunemode - enum representing possible tune modes for
 275 * the chip.
 276 * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new
 277 * channel after tune, tune status is valid.
 278 * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new
 279 * channel after tune, tune status invalid.
 280 * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if
 281 * metric thresholds are not met.
 282 * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the
 283 * previous channel.
 284 */
 285enum si476x_tunemode {
 286        SI476X_TM_VALIDATED_NORMAL_TUNE = 0,
 287        SI476X_TM_INVALIDATED_FAST_TUNE = 1,
 288        SI476X_TM_VALIDATED_AF_TUNE     = 2,
 289        SI476X_TM_VALIDATED_AF_CHECK    = 3,
 290};
 291
 292/**
 293 * enum si476x_smoothmetrics - enum containing the possible setting fo
 294 * audio transitioning of the chip
 295 * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this
 296 * new channel
 297 * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous
 298 * channel values to the new values
 299 */
 300enum si476x_smoothmetrics {
 301        SI476X_SM_INITIALIZE_AUDIO = 0,
 302        SI476X_SM_TRANSITION_AUDIO = 1,
 303};
 304
 305/**
 306 * struct si476x_rds_status_report - the structure representing the
 307 * response to 'FM_RD_STATUS' command
 308 * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY)
 309 * code has changed.
 310 * @rdspiint: Program identification(PI) code has changed.
 311 * @rdssyncint: RDS synchronization has changed.
 312 * @rdsfifoint: RDS was received and the RDS FIFO has at least
 313 * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it.
 314 * @tpptyvalid: TP flag and PTY code are valid falg.
 315 * @pivalid: PI code is valid flag.
 316 * @rdssync: RDS is currently synchronized.
 317 * @rdsfifolost: On or more RDS groups have been lost/discarded flag.
 318 * @tp: Current channel's TP flag.
 319 * @pty: Current channel's PTY code.
 320 * @pi: Current channel's PI code.
 321 * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if
 322 * empty).
 323 */
 324struct si476x_rds_status_report {
 325        bool rdstpptyint, rdspiint, rdssyncint, rdsfifoint;
 326        bool tpptyvalid, pivalid, rdssync, rdsfifolost;
 327        bool tp;
 328
 329        u8 pty;
 330        u16 pi;
 331
 332        u8 rdsfifoused;
 333        u8 ble[4];
 334
 335        struct v4l2_rds_data rds[4];
 336};
 337
 338struct si476x_rsq_status_args {
 339        bool primary;
 340        bool rsqack;
 341        bool attune;
 342        bool cancel;
 343        bool stcack;
 344};
 345
 346enum si476x_injside {
 347        SI476X_INJSIDE_AUTO     = 0,
 348        SI476X_INJSIDE_LOW      = 1,
 349        SI476X_INJSIDE_HIGH     = 2,
 350};
 351
 352struct si476x_tune_freq_args {
 353        bool zifsr;
 354        bool hd;
 355        enum si476x_injside injside;
 356        int freq;
 357        enum si476x_tunemode tunemode;
 358        enum si476x_smoothmetrics smoothmetrics;
 359        int antcap;
 360};
 361
 362int  si476x_core_stop(struct si476x_core *, bool);
 363int  si476x_core_start(struct si476x_core *, bool);
 364int  si476x_core_set_power_state(struct si476x_core *, enum si476x_power_state);
 365bool si476x_core_has_am(struct si476x_core *);
 366bool si476x_core_has_diversity(struct si476x_core *);
 367bool si476x_core_is_a_secondary_tuner(struct si476x_core *);
 368bool si476x_core_is_a_primary_tuner(struct si476x_core *);
 369bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core);
 370bool si476x_core_is_powered_up(struct si476x_core *core);
 371
 372enum si476x_i2c_type {
 373        SI476X_I2C_SEND,
 374        SI476X_I2C_RECV
 375};
 376
 377int si476x_core_i2c_xfer(struct si476x_core *,
 378                         enum si476x_i2c_type,
 379                         char *, int);
 380
 381
 382/* -------------------- si476x-cmd.c ----------------------- */
 383
 384int si476x_core_cmd_func_info(struct si476x_core *, struct si476x_func_info *);
 385int si476x_core_cmd_set_property(struct si476x_core *, u16, u16);
 386int si476x_core_cmd_get_property(struct si476x_core *, u16);
 387int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *,
 388                                      enum si476x_dclk_config,
 389                                      enum si476x_dfs_config,
 390                                      enum si476x_dout_config,
 391                                      enum si476x_xout_config);
 392int si476x_core_cmd_zif_pin_cfg(struct si476x_core *,
 393                                enum si476x_iqclk_config,
 394                                enum si476x_iqfs_config,
 395                                enum si476x_iout_config,
 396                                enum si476x_qout_config);
 397int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *,
 398                                            enum si476x_icin_config,
 399                                            enum si476x_icip_config,
 400                                            enum si476x_icon_config,
 401                                            enum si476x_icop_config);
 402int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *,
 403                                      enum si476x_lrout_config);
 404int si476x_core_cmd_intb_pin_cfg(struct si476x_core *, enum si476x_intb_config,
 405                                 enum si476x_a1_config);
 406int si476x_core_cmd_fm_seek_start(struct si476x_core *, bool, bool);
 407int si476x_core_cmd_am_seek_start(struct si476x_core *, bool, bool);
 408int si476x_core_cmd_fm_rds_status(struct si476x_core *, bool, bool, bool,
 409                                  struct si476x_rds_status_report *);
 410int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *, bool,
 411                                      struct si476x_rds_blockcount_report *);
 412int si476x_core_cmd_fm_tune_freq(struct si476x_core *,
 413                                 struct si476x_tune_freq_args *);
 414int si476x_core_cmd_am_tune_freq(struct si476x_core *,
 415                                 struct si476x_tune_freq_args *);
 416int si476x_core_cmd_am_rsq_status(struct si476x_core *,
 417                                  struct si476x_rsq_status_args *,
 418                                  struct si476x_rsq_status_report *);
 419int si476x_core_cmd_fm_rsq_status(struct si476x_core *,
 420                                  struct si476x_rsq_status_args *,
 421                                  struct si476x_rsq_status_report *);
 422int si476x_core_cmd_power_up(struct si476x_core *,
 423                             struct si476x_power_up_args *);
 424int si476x_core_cmd_power_down(struct si476x_core *,
 425                               struct si476x_power_down_args *);
 426int si476x_core_cmd_fm_phase_div_status(struct si476x_core *);
 427int si476x_core_cmd_fm_phase_diversity(struct si476x_core *,
 428                                       enum si476x_phase_diversity_mode);
 429
 430int si476x_core_cmd_fm_acf_status(struct si476x_core *,
 431                                  struct si476x_acf_status_report *);
 432int si476x_core_cmd_am_acf_status(struct si476x_core *,
 433                                  struct si476x_acf_status_report *);
 434int si476x_core_cmd_agc_status(struct si476x_core *,
 435                               struct si476x_agc_status_report *);
 436
 437enum si476x_power_grid_type {
 438        SI476X_POWER_GRID_50HZ = 0,
 439        SI476X_POWER_GRID_60HZ,
 440};
 441
 442/* Properties  */
 443
 444enum si476x_interrupt_flags {
 445        SI476X_STCIEN = (1 << 0),
 446        SI476X_ACFIEN = (1 << 1),
 447        SI476X_RDSIEN = (1 << 2),
 448        SI476X_RSQIEN = (1 << 3),
 449
 450        SI476X_ERRIEN = (1 << 6),
 451        SI476X_CTSIEN = (1 << 7),
 452
 453        SI476X_STCREP = (1 << 8),
 454        SI476X_ACFREP = (1 << 9),
 455        SI476X_RDSREP = (1 << 10),
 456        SI476X_RSQREP = (1 << 11),
 457};
 458
 459enum si476x_rdsint_sources {
 460        SI476X_RDSTPPTY = (1 << 4),
 461        SI476X_RDSPI    = (1 << 3),
 462        SI476X_RDSSYNC  = (1 << 1),
 463        SI476X_RDSRECV  = (1 << 0),
 464};
 465
 466enum si476x_status_response_bits {
 467        SI476X_CTS        = (1 << 7),
 468        SI476X_ERR        = (1 << 6),
 469        /* Status response for WB receiver */
 470        SI476X_WB_ASQ_INT = (1 << 4),
 471        SI476X_RSQ_INT    = (1 << 3),
 472        /* Status response for FM receiver */
 473        SI476X_FM_RDS_INT = (1 << 2),
 474        SI476X_ACF_INT    = (1 << 1),
 475        SI476X_STC_INT    = (1 << 0),
 476};
 477
 478/* -------------------- si476x-prop.c ----------------------- */
 479
 480enum si476x_common_receiver_properties {
 481        SI476X_PROP_INT_CTL_ENABLE                      = 0x0000,
 482        SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE        = 0x0200,
 483        SI476X_PROP_DIGITAL_IO_INPUT_FORMAT             = 0x0201,
 484        SI476X_PROP_DIGITAL_IO_OUTPUT_SAMPLE_RATE       = 0x0202,
 485        SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT            = 0x0203,
 486
 487        SI476X_PROP_SEEK_BAND_BOTTOM                    = 0x1100,
 488        SI476X_PROP_SEEK_BAND_TOP                       = 0x1101,
 489        SI476X_PROP_SEEK_FREQUENCY_SPACING              = 0x1102,
 490
 491        SI476X_PROP_VALID_MAX_TUNE_ERROR                = 0x2000,
 492        SI476X_PROP_VALID_SNR_THRESHOLD                 = 0x2003,
 493        SI476X_PROP_VALID_RSSI_THRESHOLD                = 0x2004,
 494};
 495
 496enum si476x_am_receiver_properties {
 497        SI476X_PROP_AUDIO_PWR_LINE_FILTER               = 0x0303,
 498};
 499
 500enum si476x_fm_receiver_properties {
 501        SI476X_PROP_AUDIO_DEEMPHASIS                    = 0x0302,
 502
 503        SI476X_PROP_FM_RDS_INTERRUPT_SOURCE             = 0x4000,
 504        SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT         = 0x4001,
 505        SI476X_PROP_FM_RDS_CONFIG                       = 0x4002,
 506};
 507
 508enum si476x_prop_audio_pwr_line_filter_bits {
 509        SI476X_PROP_PWR_HARMONICS_MASK  = 0x001f,
 510        SI476X_PROP_PWR_GRID_MASK       = 0x0100,
 511        SI476X_PROP_PWR_ENABLE_MASK     = 0x0200,
 512        SI476X_PROP_PWR_GRID_50HZ       = 0x0000,
 513        SI476X_PROP_PWR_GRID_60HZ       = 0x0100,
 514};
 515
 516enum si476x_prop_fm_rds_config_bits {
 517        SI476X_PROP_RDSEN_MASK  = 0x1,
 518        SI476X_PROP_RDSEN       = 0x1,
 519};
 520
 521
 522struct regmap *devm_regmap_init_si476x(struct si476x_core *);
 523
 524#endif  /* SI476X_CORE_H */
 525