linux/include/linux/mlx4/cmd.h
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2006 Cisco Systems, Inc.  All rights reserved.
   3 *
   4 * This software is available to you under a choice of one of two
   5 * licenses.  You may choose to be licensed under the terms of the GNU
   6 * General Public License (GPL) Version 2, available from the file
   7 * COPYING in the main directory of this source tree, or the
   8 * OpenIB.org BSD license below:
   9 *
  10 *     Redistribution and use in source and binary forms, with or
  11 *     without modification, are permitted provided that the following
  12 *     conditions are met:
  13 *
  14 *      - Redistributions of source code must retain the above
  15 *        copyright notice, this list of conditions and the following
  16 *        disclaimer.
  17 *
  18 *      - Redistributions in binary form must reproduce the above
  19 *        copyright notice, this list of conditions and the following
  20 *        disclaimer in the documentation and/or other materials
  21 *        provided with the distribution.
  22 *
  23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  30 * SOFTWARE.
  31 */
  32
  33#ifndef MLX4_CMD_H
  34#define MLX4_CMD_H
  35
  36#include <linux/dma-mapping.h>
  37#include <linux/if_link.h>
  38#include <linux/mlx4/device.h>
  39#include <linux/netdevice.h>
  40
  41enum {
  42        /* initialization and general commands */
  43        MLX4_CMD_SYS_EN          = 0x1,
  44        MLX4_CMD_SYS_DIS         = 0x2,
  45        MLX4_CMD_MAP_FA          = 0xfff,
  46        MLX4_CMD_UNMAP_FA        = 0xffe,
  47        MLX4_CMD_RUN_FW          = 0xff6,
  48        MLX4_CMD_MOD_STAT_CFG    = 0x34,
  49        MLX4_CMD_QUERY_DEV_CAP   = 0x3,
  50        MLX4_CMD_QUERY_FW        = 0x4,
  51        MLX4_CMD_ENABLE_LAM      = 0xff8,
  52        MLX4_CMD_DISABLE_LAM     = 0xff7,
  53        MLX4_CMD_QUERY_DDR       = 0x5,
  54        MLX4_CMD_QUERY_ADAPTER   = 0x6,
  55        MLX4_CMD_INIT_HCA        = 0x7,
  56        MLX4_CMD_CLOSE_HCA       = 0x8,
  57        MLX4_CMD_INIT_PORT       = 0x9,
  58        MLX4_CMD_CLOSE_PORT      = 0xa,
  59        MLX4_CMD_QUERY_HCA       = 0xb,
  60        MLX4_CMD_QUERY_PORT      = 0x43,
  61        MLX4_CMD_SENSE_PORT      = 0x4d,
  62        MLX4_CMD_HW_HEALTH_CHECK = 0x50,
  63        MLX4_CMD_SET_PORT        = 0xc,
  64        MLX4_CMD_SET_NODE        = 0x5a,
  65        MLX4_CMD_QUERY_FUNC      = 0x56,
  66        MLX4_CMD_ACCESS_DDR      = 0x2e,
  67        MLX4_CMD_MAP_ICM         = 0xffa,
  68        MLX4_CMD_UNMAP_ICM       = 0xff9,
  69        MLX4_CMD_MAP_ICM_AUX     = 0xffc,
  70        MLX4_CMD_UNMAP_ICM_AUX   = 0xffb,
  71        MLX4_CMD_SET_ICM_SIZE    = 0xffd,
  72        MLX4_CMD_ACCESS_REG      = 0x3b,
  73        MLX4_CMD_ALLOCATE_VPP    = 0x80,
  74        MLX4_CMD_SET_VPORT_QOS   = 0x81,
  75
  76        /*master notify fw on finish for slave's flr*/
  77        MLX4_CMD_INFORM_FLR_DONE = 0x5b,
  78        MLX4_CMD_VIRT_PORT_MAP   = 0x5c,
  79        MLX4_CMD_GET_OP_REQ      = 0x59,
  80
  81        /* TPT commands */
  82        MLX4_CMD_SW2HW_MPT       = 0xd,
  83        MLX4_CMD_QUERY_MPT       = 0xe,
  84        MLX4_CMD_HW2SW_MPT       = 0xf,
  85        MLX4_CMD_READ_MTT        = 0x10,
  86        MLX4_CMD_WRITE_MTT       = 0x11,
  87        MLX4_CMD_SYNC_TPT        = 0x2f,
  88
  89        /* EQ commands */
  90        MLX4_CMD_MAP_EQ          = 0x12,
  91        MLX4_CMD_SW2HW_EQ        = 0x13,
  92        MLX4_CMD_HW2SW_EQ        = 0x14,
  93        MLX4_CMD_QUERY_EQ        = 0x15,
  94
  95        /* CQ commands */
  96        MLX4_CMD_SW2HW_CQ        = 0x16,
  97        MLX4_CMD_HW2SW_CQ        = 0x17,
  98        MLX4_CMD_QUERY_CQ        = 0x18,
  99        MLX4_CMD_MODIFY_CQ       = 0x2c,
 100
 101        /* SRQ commands */
 102        MLX4_CMD_SW2HW_SRQ       = 0x35,
 103        MLX4_CMD_HW2SW_SRQ       = 0x36,
 104        MLX4_CMD_QUERY_SRQ       = 0x37,
 105        MLX4_CMD_ARM_SRQ         = 0x40,
 106
 107        /* QP/EE commands */
 108        MLX4_CMD_RST2INIT_QP     = 0x19,
 109        MLX4_CMD_INIT2RTR_QP     = 0x1a,
 110        MLX4_CMD_RTR2RTS_QP      = 0x1b,
 111        MLX4_CMD_RTS2RTS_QP      = 0x1c,
 112        MLX4_CMD_SQERR2RTS_QP    = 0x1d,
 113        MLX4_CMD_2ERR_QP         = 0x1e,
 114        MLX4_CMD_RTS2SQD_QP      = 0x1f,
 115        MLX4_CMD_SQD2SQD_QP      = 0x38,
 116        MLX4_CMD_SQD2RTS_QP      = 0x20,
 117        MLX4_CMD_2RST_QP         = 0x21,
 118        MLX4_CMD_QUERY_QP        = 0x22,
 119        MLX4_CMD_INIT2INIT_QP    = 0x2d,
 120        MLX4_CMD_SUSPEND_QP      = 0x32,
 121        MLX4_CMD_UNSUSPEND_QP    = 0x33,
 122        MLX4_CMD_UPDATE_QP       = 0x61,
 123        /* special QP and management commands */
 124        MLX4_CMD_CONF_SPECIAL_QP = 0x23,
 125        MLX4_CMD_MAD_IFC         = 0x24,
 126        MLX4_CMD_MAD_DEMUX       = 0x203,
 127
 128        /* multicast commands */
 129        MLX4_CMD_READ_MCG        = 0x25,
 130        MLX4_CMD_WRITE_MCG       = 0x26,
 131        MLX4_CMD_MGID_HASH       = 0x27,
 132
 133        /* miscellaneous commands */
 134        MLX4_CMD_DIAG_RPRT       = 0x30,
 135        MLX4_CMD_NOP             = 0x31,
 136        MLX4_CMD_CONFIG_DEV      = 0x3a,
 137        MLX4_CMD_ACCESS_MEM      = 0x2e,
 138        MLX4_CMD_SET_VEP         = 0x52,
 139
 140        /* Ethernet specific commands */
 141        MLX4_CMD_SET_VLAN_FLTR   = 0x47,
 142        MLX4_CMD_SET_MCAST_FLTR  = 0x48,
 143        MLX4_CMD_DUMP_ETH_STATS  = 0x49,
 144
 145        /* Communication channel commands */
 146        MLX4_CMD_ARM_COMM_CHANNEL = 0x57,
 147        MLX4_CMD_GEN_EQE         = 0x58,
 148
 149        /* virtual commands */
 150        MLX4_CMD_ALLOC_RES       = 0xf00,
 151        MLX4_CMD_FREE_RES        = 0xf01,
 152        MLX4_CMD_MCAST_ATTACH    = 0xf05,
 153        MLX4_CMD_UCAST_ATTACH    = 0xf06,
 154        MLX4_CMD_PROMISC         = 0xf08,
 155        MLX4_CMD_QUERY_FUNC_CAP  = 0xf0a,
 156        MLX4_CMD_QP_ATTACH       = 0xf0b,
 157
 158        /* debug commands */
 159        MLX4_CMD_QUERY_DEBUG_MSG = 0x2a,
 160        MLX4_CMD_SET_DEBUG_MSG   = 0x2b,
 161
 162        /* statistics commands */
 163        MLX4_CMD_QUERY_IF_STAT   = 0X54,
 164        MLX4_CMD_SET_IF_STAT     = 0X55,
 165
 166        /* register/delete flow steering network rules */
 167        MLX4_QP_FLOW_STEERING_ATTACH = 0x65,
 168        MLX4_QP_FLOW_STEERING_DETACH = 0x66,
 169        MLX4_FLOW_STEERING_IB_UC_QP_RANGE = 0x64,
 170
 171        /* Update and read QCN parameters */
 172        MLX4_CMD_CONGESTION_CTRL_OPCODE = 0x68,
 173};
 174
 175enum {
 176        MLX4_CMD_TIME_CLASS_A   = 60000,
 177        MLX4_CMD_TIME_CLASS_B   = 60000,
 178        MLX4_CMD_TIME_CLASS_C   = 60000,
 179};
 180
 181enum {
 182        /* virtual to physical port mapping opcode modifiers */
 183        MLX4_GET_PORT_VIRT2PHY = 0x0,
 184        MLX4_SET_PORT_VIRT2PHY = 0x1,
 185};
 186
 187enum {
 188        MLX4_MAILBOX_SIZE       = 4096,
 189        MLX4_ACCESS_MEM_ALIGN   = 256,
 190};
 191
 192enum {
 193        /* Set port opcode modifiers */
 194        MLX4_SET_PORT_IB_OPCODE         = 0x0,
 195        MLX4_SET_PORT_ETH_OPCODE        = 0x1,
 196        MLX4_SET_PORT_BEACON_OPCODE     = 0x4,
 197};
 198
 199enum {
 200        /* Set port Ethernet input modifiers */
 201        MLX4_SET_PORT_GENERAL   = 0x0,
 202        MLX4_SET_PORT_RQP_CALC  = 0x1,
 203        MLX4_SET_PORT_MAC_TABLE = 0x2,
 204        MLX4_SET_PORT_VLAN_TABLE = 0x3,
 205        MLX4_SET_PORT_PRIO_MAP  = 0x4,
 206        MLX4_SET_PORT_GID_TABLE = 0x5,
 207        MLX4_SET_PORT_PRIO2TC   = 0x8,
 208        MLX4_SET_PORT_SCHEDULER = 0x9,
 209        MLX4_SET_PORT_VXLAN     = 0xB,
 210        MLX4_SET_PORT_ROCE_ADDR = 0xD
 211};
 212
 213enum {
 214        MLX4_CMD_MAD_DEMUX_CONFIG       = 0,
 215        MLX4_CMD_MAD_DEMUX_QUERY_STATE  = 1,
 216        MLX4_CMD_MAD_DEMUX_QUERY_RESTR  = 2, /* Query mad demux restrictions */
 217};
 218
 219enum {
 220        MLX4_CMD_WRAPPED,
 221        MLX4_CMD_NATIVE
 222};
 223
 224/*
 225 * MLX4_RX_CSUM_MODE_VAL_NON_TCP_UDP -
 226 * Receive checksum value is reported in CQE also for non TCP/UDP packets.
 227 *
 228 * MLX4_RX_CSUM_MODE_L4 -
 229 * L4_CSUM bit in CQE, which indicates whether or not L4 checksum
 230 * was validated correctly, is supported.
 231 *
 232 * MLX4_RX_CSUM_MODE_IP_OK_IP_NON_TCP_UDP -
 233 * IP_OK CQE's field is supported also for non TCP/UDP IP packets.
 234 *
 235 * MLX4_RX_CSUM_MODE_MULTI_VLAN -
 236 * Receive Checksum offload is supported for packets with more than 2 vlan headers.
 237 */
 238enum mlx4_rx_csum_mode {
 239        MLX4_RX_CSUM_MODE_VAL_NON_TCP_UDP               = 1UL << 0,
 240        MLX4_RX_CSUM_MODE_L4                            = 1UL << 1,
 241        MLX4_RX_CSUM_MODE_IP_OK_IP_NON_TCP_UDP          = 1UL << 2,
 242        MLX4_RX_CSUM_MODE_MULTI_VLAN                    = 1UL << 3
 243};
 244
 245struct mlx4_config_dev_params {
 246        u16     vxlan_udp_dport;
 247        u8      rx_csum_flags_port_1;
 248        u8      rx_csum_flags_port_2;
 249};
 250
 251enum mlx4_en_congestion_control_algorithm {
 252        MLX4_CTRL_ALGO_802_1_QAU_REACTION_POINT = 0,
 253};
 254
 255enum mlx4_en_congestion_control_opmod {
 256        MLX4_CONGESTION_CONTROL_GET_PARAMS,
 257        MLX4_CONGESTION_CONTROL_GET_STATISTICS,
 258        MLX4_CONGESTION_CONTROL_SET_PARAMS = 4,
 259};
 260
 261struct mlx4_dev;
 262
 263struct mlx4_cmd_mailbox {
 264        void                   *buf;
 265        dma_addr_t              dma;
 266};
 267
 268int __mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
 269               int out_is_imm, u32 in_modifier, u8 op_modifier,
 270               u16 op, unsigned long timeout, int native);
 271
 272/* Invoke a command with no output parameter */
 273static inline int mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u32 in_modifier,
 274                           u8 op_modifier, u16 op, unsigned long timeout,
 275                           int native)
 276{
 277        return __mlx4_cmd(dev, in_param, NULL, 0, in_modifier,
 278                          op_modifier, op, timeout, native);
 279}
 280
 281/* Invoke a command with an output mailbox */
 282static inline int mlx4_cmd_box(struct mlx4_dev *dev, u64 in_param, u64 out_param,
 283                               u32 in_modifier, u8 op_modifier, u16 op,
 284                               unsigned long timeout, int native)
 285{
 286        return __mlx4_cmd(dev, in_param, &out_param, 0, in_modifier,
 287                          op_modifier, op, timeout, native);
 288}
 289
 290/*
 291 * Invoke a command with an immediate output parameter (and copy the
 292 * output into the caller's out_param pointer after the command
 293 * executes).
 294 */
 295static inline int mlx4_cmd_imm(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
 296                               u32 in_modifier, u8 op_modifier, u16 op,
 297                               unsigned long timeout, int native)
 298{
 299        return __mlx4_cmd(dev, in_param, out_param, 1, in_modifier,
 300                          op_modifier, op, timeout, native);
 301}
 302
 303struct mlx4_cmd_mailbox *mlx4_alloc_cmd_mailbox(struct mlx4_dev *dev);
 304void mlx4_free_cmd_mailbox(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox);
 305
 306int mlx4_get_counter_stats(struct mlx4_dev *dev, int counter_index,
 307                           struct mlx4_counter *counter_stats, int reset);
 308int mlx4_get_vf_stats(struct mlx4_dev *dev, int port, int vf_idx,
 309                      struct ifla_vf_stats *vf_stats);
 310u32 mlx4_comm_get_version(void);
 311int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u8 *mac);
 312int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan,
 313                     u8 qos, __be16 proto);
 314int mlx4_set_vf_rate(struct mlx4_dev *dev, int port, int vf, int min_tx_rate,
 315                     int max_tx_rate);
 316int mlx4_set_vf_spoofchk(struct mlx4_dev *dev, int port, int vf, bool setting);
 317int mlx4_get_vf_config(struct mlx4_dev *dev, int port, int vf, struct ifla_vf_info *ivf);
 318int mlx4_set_vf_link_state(struct mlx4_dev *dev, int port, int vf, int link_state);
 319int mlx4_config_dev_retrieval(struct mlx4_dev *dev,
 320                              struct mlx4_config_dev_params *params);
 321void mlx4_cmd_wake_completions(struct mlx4_dev *dev);
 322void mlx4_report_internal_err_comm_event(struct mlx4_dev *dev);
 323/*
 324 * mlx4_get_slave_default_vlan -
 325 * return true if VST ( default vlan)
 326 * if VST, will return vlan & qos (if not NULL)
 327 */
 328bool mlx4_get_slave_default_vlan(struct mlx4_dev *dev, int port, int slave,
 329                                 u16 *vlan, u8 *qos);
 330
 331#define MLX4_COMM_GET_IF_REV(cmd_chan_ver) (u8)((cmd_chan_ver) >> 8)
 332#define COMM_CHAN_EVENT_INTERNAL_ERR (1 << 17)
 333
 334#endif /* MLX4_CMD_H */
 335