linux/include/uapi/linux/mroute6.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
   2#ifndef _UAPI__LINUX_MROUTE6_H
   3#define _UAPI__LINUX_MROUTE6_H
   4
   5#include <linux/const.h>
   6#include <linux/types.h>
   7#include <linux/sockios.h>
   8#include <linux/in6.h>          /* For struct sockaddr_in6. */
   9
  10/*
  11 *      Based on the MROUTING 3.5 defines primarily to keep
  12 *      source compatibility with BSD.
  13 *
  14 *      See the pim6sd code for the original history.
  15 *
  16 *      Protocol Independent Multicast (PIM) data structures included
  17 *      Carlos Picoto (cap@di.fc.ul.pt)
  18 *
  19 */
  20
  21#define MRT6_BASE       200
  22#define MRT6_INIT       (MRT6_BASE)     /* Activate the kernel mroute code      */
  23#define MRT6_DONE       (MRT6_BASE+1)   /* Shutdown the kernel mroute           */
  24#define MRT6_ADD_MIF    (MRT6_BASE+2)   /* Add a virtual interface              */
  25#define MRT6_DEL_MIF    (MRT6_BASE+3)   /* Delete a virtual interface           */
  26#define MRT6_ADD_MFC    (MRT6_BASE+4)   /* Add a multicast forwarding entry     */
  27#define MRT6_DEL_MFC    (MRT6_BASE+5)   /* Delete a multicast forwarding entry  */
  28#define MRT6_VERSION    (MRT6_BASE+6)   /* Get the kernel multicast version     */
  29#define MRT6_ASSERT     (MRT6_BASE+7)   /* Activate PIM assert mode             */
  30#define MRT6_PIM        (MRT6_BASE+8)   /* enable PIM code                      */
  31#define MRT6_TABLE      (MRT6_BASE+9)   /* Specify mroute table ID              */
  32#define MRT6_ADD_MFC_PROXY      (MRT6_BASE+10)  /* Add a (*,*|G) mfc entry      */
  33#define MRT6_DEL_MFC_PROXY      (MRT6_BASE+11)  /* Del a (*,*|G) mfc entry      */
  34#define MRT6_FLUSH      (MRT6_BASE+12)  /* Flush all mfc entries and/or vifs    */
  35#define MRT6_MAX        (MRT6_BASE+12)
  36
  37#define SIOCGETMIFCNT_IN6       SIOCPROTOPRIVATE        /* IP protocol privates */
  38#define SIOCGETSGCNT_IN6        (SIOCPROTOPRIVATE+1)
  39#define SIOCGETRPF      (SIOCPROTOPRIVATE+2)
  40
  41/* MRT6_FLUSH optional flags */
  42#define MRT6_FLUSH_MFC  1       /* Flush multicast entries */
  43#define MRT6_FLUSH_MFC_STATIC   2       /* Flush static multicast entries */
  44#define MRT6_FLUSH_MIFS 4       /* Flushing multicast vifs */
  45#define MRT6_FLUSH_MIFS_STATIC  8       /* Flush static multicast vifs */
  46
  47#define MAXMIFS         32
  48typedef unsigned long mifbitmap_t;      /* User mode code depends on this lot */
  49typedef unsigned short mifi_t;
  50#define ALL_MIFS        ((mifi_t)(-1))
  51
  52#ifndef IF_SETSIZE
  53#define IF_SETSIZE      256
  54#endif
  55
  56typedef __u32           if_mask;
  57#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
  58
  59typedef struct if_set {
  60        if_mask ifs_bits[__KERNEL_DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
  61} if_set;
  62
  63#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
  64#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
  65#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
  66#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
  67#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
  68
  69/*
  70 *      Passed by mrouted for an MRT_ADD_MIF - again we use the
  71 *      mrouted 3.6 structures for compatibility
  72 */
  73
  74struct mif6ctl {
  75        mifi_t  mif6c_mifi;             /* Index of MIF */
  76        unsigned char mif6c_flags;      /* MIFF_ flags */
  77        unsigned char vifc_threshold;   /* ttl limit */
  78        __u16    mif6c_pifi;            /* the index of the physical IF */
  79        unsigned int vifc_rate_limit;   /* Rate limiter values (NI) */
  80};
  81
  82#define MIFF_REGISTER   0x1     /* register vif */
  83
  84/*
  85 *      Cache manipulation structures for mrouted and PIMd
  86 */
  87
  88struct mf6cctl {
  89        struct sockaddr_in6 mf6cc_origin;               /* Origin of mcast      */
  90        struct sockaddr_in6 mf6cc_mcastgrp;             /* Group in question    */
  91        mifi_t  mf6cc_parent;                   /* Where it arrived     */
  92        struct if_set mf6cc_ifset;              /* Where it is going */
  93};
  94
  95/*
  96 *      Group count retrieval for pim6sd
  97 */
  98
  99struct sioc_sg_req6 {
 100        struct sockaddr_in6 src;
 101        struct sockaddr_in6 grp;
 102        unsigned long pktcnt;
 103        unsigned long bytecnt;
 104        unsigned long wrong_if;
 105};
 106
 107/*
 108 *      To get vif packet counts
 109 */
 110
 111struct sioc_mif_req6 {
 112        mifi_t  mifi;           /* Which iface */
 113        unsigned long icount;   /* In packets */
 114        unsigned long ocount;   /* Out packets */
 115        unsigned long ibytes;   /* In bytes */
 116        unsigned long obytes;   /* Out bytes */
 117};
 118
 119/*
 120 *      That's all usermode folks
 121 */
 122
 123
 124
 125/*
 126 * Structure used to communicate from kernel to multicast router.
 127 * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
 128 * used for IPv4 implementation). This is because this structure will be passed via an
 129 * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
 130 * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
 131 */
 132
 133struct mrt6msg {
 134#define MRT6MSG_NOCACHE         1
 135#define MRT6MSG_WRONGMIF        2
 136#define MRT6MSG_WHOLEPKT        3               /* used for use level encap */
 137        __u8            im6_mbz;                /* must be zero            */
 138        __u8            im6_msgtype;            /* what type of message    */
 139        __u16           im6_mif;                /* mif rec'd on            */
 140        __u32           im6_pad;                /* padding for 64 bit arch */
 141        struct in6_addr im6_src, im6_dst;
 142};
 143
 144/* ip6mr netlink cache report attributes */
 145enum {
 146        IP6MRA_CREPORT_UNSPEC,
 147        IP6MRA_CREPORT_MSGTYPE,
 148        IP6MRA_CREPORT_MIF_ID,
 149        IP6MRA_CREPORT_SRC_ADDR,
 150        IP6MRA_CREPORT_DST_ADDR,
 151        IP6MRA_CREPORT_PKT,
 152        __IP6MRA_CREPORT_MAX
 153};
 154#define IP6MRA_CREPORT_MAX (__IP6MRA_CREPORT_MAX - 1)
 155
 156#endif /* _UAPI__LINUX_MROUTE6_H */
 157