1#ifndef __NET_WIRELESS_REG_H 2#define __NET_WIRELESS_REG_H 3 4#include <net/cfg80211.h> 5 6/* 7 * Copyright 2008-2011 Luis R. Rodriguez <mcgrof@qca.qualcomm.com> 8 * Copyright (C) 2019 Intel Corporation 9 * 10 * Permission to use, copy, modify, and/or distribute this software for any 11 * purpose with or without fee is hereby granted, provided that the above 12 * copyright notice and this permission notice appear in all copies. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 15 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 16 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 17 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 18 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 19 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 20 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 21 */ 22 23enum ieee80211_regd_source { 24 REGD_SOURCE_INTERNAL_DB, 25 REGD_SOURCE_CRDA, 26 REGD_SOURCE_CACHED, 27}; 28 29extern const struct ieee80211_regdomain __rcu *cfg80211_regdomain; 30 31bool reg_is_valid_request(const char *alpha2); 32bool is_world_regdom(const char *alpha2); 33bool reg_supported_dfs_region(enum nl80211_dfs_regions dfs_region); 34enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy); 35 36int regulatory_hint_user(const char *alpha2, 37 enum nl80211_user_reg_hint_type user_reg_hint_type); 38 39/** 40 * regulatory_hint_indoor - hint operation in indoor env. or not 41 * @is_indoor: if true indicates that user space thinks that the 42 * device is operating in an indoor environment. 43 * @portid: the netlink port ID on which the hint was given. 44 */ 45int regulatory_hint_indoor(bool is_indoor, u32 portid); 46 47/** 48 * regulatory_netlink_notify - notify on released netlink socket 49 * @portid: the netlink socket port ID 50 */ 51void regulatory_netlink_notify(u32 portid); 52 53void wiphy_regulatory_register(struct wiphy *wiphy); 54void wiphy_regulatory_deregister(struct wiphy *wiphy); 55 56int __init regulatory_init(void); 57void regulatory_exit(void); 58 59int set_regdom(const struct ieee80211_regdomain *rd, 60 enum ieee80211_regd_source regd_src); 61 62unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd, 63 const struct ieee80211_reg_rule *rule); 64 65bool reg_last_request_cell_base(void); 66 67/** 68 * regulatory_hint_found_beacon - hints a beacon was found on a channel 69 * @wiphy: the wireless device where the beacon was found on 70 * @beacon_chan: the channel on which the beacon was found on 71 * @gfp: context flags 72 * 73 * This informs the wireless core that a beacon from an AP was found on 74 * the channel provided. This allows the wireless core to make educated 75 * guesses on regulatory to help with world roaming. This is only used for 76 * world roaming -- when we do not know our current location. This is 77 * only useful on channels 12, 13 and 14 on the 2 GHz band as channels 78 * 1-11 are already enabled by the world regulatory domain; and on 79 * non-radar 5 GHz channels. 80 * 81 * Drivers do not need to call this, cfg80211 will do it for after a scan 82 * on a newly found BSS. If you cannot make use of this feature you can 83 * set the wiphy->disable_beacon_hints to true. 84 */ 85int regulatory_hint_found_beacon(struct wiphy *wiphy, 86 struct ieee80211_channel *beacon_chan, 87 gfp_t gfp); 88 89/** 90 * regulatory_hint_country_ie - hints a country IE as a regulatory domain 91 * @wiphy: the wireless device giving the hint (used only for reporting 92 * conflicts) 93 * @band: the band on which the country IE was received on. This determines 94 * the band we'll process the country IE channel triplets for. 95 * @country_ie: pointer to the country IE 96 * @country_ie_len: length of the country IE 97 * 98 * We will intersect the rd with the what CRDA tells us should apply 99 * for the alpha2 this country IE belongs to, this prevents APs from 100 * sending us incorrect or outdated information against a country. 101 * 102 * The AP is expected to provide Country IE channel triplets for the 103 * band it is on. It is technically possible for APs to send channel 104 * country IE triplets even for channels outside of the band they are 105 * in but for that they would have to use the regulatory extension 106 * in combination with a triplet but this behaviour is currently 107 * not observed. For this reason if a triplet is seen with channel 108 * information for a band the BSS is not present in it will be ignored. 109 */ 110void regulatory_hint_country_ie(struct wiphy *wiphy, 111 enum nl80211_band band, 112 const u8 *country_ie, 113 u8 country_ie_len); 114 115/** 116 * regulatory_hint_disconnect - informs all devices have been disconnected 117 * 118 * Regulotory rules can be enhanced further upon scanning and upon 119 * connection to an AP. These rules become stale if we disconnect 120 * and go to another country, whether or not we suspend and resume. 121 * If we suspend, go to another country and resume we'll automatically 122 * get disconnected shortly after resuming and things will be reset as well. 123 * This routine is a helper to restore regulatory settings to how they were 124 * prior to our first connect attempt. This includes ignoring country IE and 125 * beacon regulatory hints. The ieee80211_regdom module parameter will always 126 * be respected but if a user had set the regulatory domain that will take 127 * precedence. 128 * 129 * Must be called from process context. 130 */ 131void regulatory_hint_disconnect(void); 132 133/** 134 * cfg80211_get_unii - get the U-NII band for the frequency 135 * @freq: the frequency for which we want to get the UNII band. 136 137 * Get a value specifying the U-NII band frequency belongs to. 138 * U-NII bands are defined by the FCC in C.F.R 47 part 15. 139 * 140 * Returns -EINVAL if freq is invalid, 0 for UNII-1, 1 for UNII-2A, 141 * 2 for UNII-2B, 3 for UNII-2C and 4 for UNII-3. 142 */ 143int cfg80211_get_unii(int freq); 144 145/** 146 * regulatory_indoor_allowed - is indoor operation allowed 147 */ 148bool regulatory_indoor_allowed(void); 149 150/* 151 * Grace period to timeout pre-CAC results on the dfs channels. This timeout 152 * value is used for Non-ETSI domain. 153 * TODO: May be make this timeout available through regdb? 154 */ 155#define REG_PRE_CAC_EXPIRY_GRACE_MS 2000 156 157/** 158 * regulatory_propagate_dfs_state - Propagate DFS channel state to other wiphys 159 * @wiphy - wiphy on which radar is detected and the event will be propagated 160 * to other available wiphys having the same DFS domain 161 * @chandef - Channel definition of radar detected channel 162 * @dfs_state - DFS channel state to be set 163 * @event - Type of radar event which triggered this DFS state change 164 * 165 * This function should be called with rtnl lock held. 166 */ 167void regulatory_propagate_dfs_state(struct wiphy *wiphy, 168 struct cfg80211_chan_def *chandef, 169 enum nl80211_dfs_state dfs_state, 170 enum nl80211_radar_event event); 171 172/** 173 * reg_dfs_domain_same - Checks if both wiphy have same DFS domain configured 174 * @wiphy1 - wiphy it's dfs_region to be checked against that of wiphy2 175 * @wiphy2 - wiphy it's dfs_region to be checked against that of wiphy1 176 */ 177bool reg_dfs_domain_same(struct wiphy *wiphy1, struct wiphy *wiphy2); 178 179/** 180 * reg_reload_regdb - reload the regulatory.db firmware file 181 */ 182int reg_reload_regdb(void); 183 184extern const u8 shipped_regdb_certs[]; 185extern unsigned int shipped_regdb_certs_len; 186extern const u8 extra_regdb_certs[]; 187extern unsigned int extra_regdb_certs_len; 188 189#endif /* __NET_WIRELESS_REG_H */ 190