1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31static int load_asic(struct echoaudio *chip);
32static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode);
33static int set_digital_mode(struct echoaudio *chip, u8 mode);
34static int check_asic_status(struct echoaudio *chip);
35static int set_sample_rate(struct echoaudio *chip, u32 rate);
36static int set_input_clock(struct echoaudio *chip, u16 clock);
37static int set_professional_spdif(struct echoaudio *chip, char prof);
38static int set_phantom_power(struct echoaudio *chip, char on);
39static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq,
40 char force);
41
42#include <linux/interrupt.h>
43
44static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
45{
46 int err;
47
48 local_irq_enable();
49 if (snd_BUG_ON((subdevice_id & 0xfff0) != ECHO3G))
50 return -ENODEV;
51
52 err = init_dsp_comm_page(chip);
53 if (err) {
54 dev_err(chip->card->dev,
55 "init_hw - could not initialize DSP comm page\n");
56 return err;
57 }
58
59 chip->comm_page->e3g_frq_register =
60 cpu_to_le32((E3G_MAGIC_NUMBER / 48000) - 2);
61 chip->device_id = device_id;
62 chip->subdevice_id = subdevice_id;
63 chip->bad_board = true;
64 chip->has_midi = true;
65 chip->dsp_code_to_load = FW_ECHO3G_DSP;
66
67
68
69 err = load_firmware(chip);
70
71 if (err < 0) {
72 return err;
73 } else if (err == E3G_GINA3G_BOX_TYPE) {
74 chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
75 ECHO_CLOCK_BIT_SPDIF |
76 ECHO_CLOCK_BIT_ADAT;
77 chip->card_name = "Gina3G";
78 chip->px_digital_out = chip->bx_digital_out = 6;
79 chip->px_analog_in = chip->bx_analog_in = 14;
80 chip->px_digital_in = chip->bx_digital_in = 16;
81 chip->px_num = chip->bx_num = 24;
82 chip->has_phantom_power = true;
83 chip->hasnt_input_nominal_level = true;
84 } else if (err == E3G_LAYLA3G_BOX_TYPE) {
85 chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
86 ECHO_CLOCK_BIT_SPDIF |
87 ECHO_CLOCK_BIT_ADAT |
88 ECHO_CLOCK_BIT_WORD;
89 chip->card_name = "Layla3G";
90 chip->px_digital_out = chip->bx_digital_out = 8;
91 chip->px_analog_in = chip->bx_analog_in = 16;
92 chip->px_digital_in = chip->bx_digital_in = 24;
93 chip->px_num = chip->bx_num = 32;
94 } else {
95 return -ENODEV;
96 }
97
98 chip->digital_modes = ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
99 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
100 ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
101
102 return err;
103}
104
105
106
107static int set_mixer_defaults(struct echoaudio *chip)
108{
109 chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
110 chip->professional_spdif = false;
111 chip->non_audio_spdif = false;
112 chip->bad_board = false;
113 chip->phantom_power = false;
114 return init_line_levels(chip);
115}
116
117
118
119static int set_phantom_power(struct echoaudio *chip, char on)
120{
121 u32 control_reg = le32_to_cpu(chip->comm_page->control_register);
122
123 if (on)
124 control_reg |= E3G_PHANTOM_POWER;
125 else
126 control_reg &= ~E3G_PHANTOM_POWER;
127
128 chip->phantom_power = on;
129 return write_control_reg(chip, control_reg,
130 le32_to_cpu(chip->comm_page->e3g_frq_register),
131 0);
132}
133