linux/sound/pci/ice1712/quartet.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 *   ALSA driver for ICEnsemble VT1724 (Envy24HT)
   4 *
   5 *   Lowlevel functions for Infrasonic Quartet
   6 *
   7 *      Copyright (c) 2009 Pavel Hofman <pavel.hofman@ivitera.com>
   8 */
   9
  10#include <linux/delay.h>
  11#include <linux/interrupt.h>
  12#include <linux/init.h>
  13#include <linux/slab.h>
  14#include <linux/string.h>
  15#include <sound/core.h>
  16#include <sound/tlv.h>
  17#include <sound/info.h>
  18
  19#include "ice1712.h"
  20#include "envy24ht.h"
  21#include <sound/ak4113.h>
  22#include "quartet.h"
  23
  24struct qtet_spec {
  25        struct ak4113 *ak4113;
  26        unsigned int scr;       /* system control register */
  27        unsigned int mcr;       /* monitoring control register */
  28        unsigned int cpld;      /* cpld register */
  29};
  30
  31struct qtet_kcontrol_private {
  32        unsigned int bit;
  33        void (*set_register)(struct snd_ice1712 *ice, unsigned int val);
  34        unsigned int (*get_register)(struct snd_ice1712 *ice);
  35        const char * const texts[2];
  36};
  37
  38enum {
  39        IN12_SEL = 0,
  40        IN34_SEL,
  41        AIN34_SEL,
  42        COAX_OUT,
  43        IN12_MON12,
  44        IN12_MON34,
  45        IN34_MON12,
  46        IN34_MON34,
  47        OUT12_MON34,
  48        OUT34_MON12,
  49};
  50
  51static const char * const ext_clock_names[3] = {"IEC958 In", "Word Clock 1xFS",
  52        "Word Clock 256xFS"};
  53
  54/* chip address on I2C bus */
  55#define AK4113_ADDR             0x26    /* S/PDIF receiver */
  56
  57/* chip address on SPI bus */
  58#define AK4620_ADDR             0x02    /* ADC/DAC */
  59
  60
  61/*
  62 * GPIO pins
  63 */
  64
  65/* GPIO0 - O - DATA0, def. 0 */
  66#define GPIO_D0                 (1<<0)
  67/* GPIO1 - I/O - DATA1, Jack Detect Input0 (0:present, 1:missing), def. 1 */
  68#define GPIO_D1_JACKDTC0        (1<<1)
  69/* GPIO2 - I/O - DATA2, Jack Detect Input1 (0:present, 1:missing), def. 1 */
  70#define GPIO_D2_JACKDTC1        (1<<2)
  71/* GPIO3 - I/O - DATA3, def. 1 */
  72#define GPIO_D3                 (1<<3)
  73/* GPIO4 - I/O - DATA4, SPI CDTO, def. 1 */
  74#define GPIO_D4_SPI_CDTO        (1<<4)
  75/* GPIO5 - I/O - DATA5, SPI CCLK, def. 1 */
  76#define GPIO_D5_SPI_CCLK        (1<<5)
  77/* GPIO6 - I/O - DATA6, Cable Detect Input (0:detected, 1:not detected */
  78#define GPIO_D6_CD              (1<<6)
  79/* GPIO7 - I/O - DATA7, Device Detect Input (0:detected, 1:not detected */
  80#define GPIO_D7_DD              (1<<7)
  81/* GPIO8 - O - CPLD Chip Select, def. 1 */
  82#define GPIO_CPLD_CSN           (1<<8)
  83/* GPIO9 - O - CPLD register read/write (0:write, 1:read), def. 0 */
  84#define GPIO_CPLD_RW            (1<<9)
  85/* GPIO10 - O - SPI Chip Select for CODEC#0, def. 1 */
  86#define GPIO_SPI_CSN0           (1<<10)
  87/* GPIO11 - O - SPI Chip Select for CODEC#1, def. 1 */
  88#define GPIO_SPI_CSN1           (1<<11)
  89/* GPIO12 - O - Ex. Register Output Enable (0:enable, 1:disable), def. 1,
  90 * init 0 */
  91#define GPIO_EX_GPIOE           (1<<12)
  92/* GPIO13 - O - Ex. Register0 Chip Select for System Control Register,
  93 * def. 1 */
  94#define GPIO_SCR                (1<<13)
  95/* GPIO14 - O - Ex. Register1 Chip Select for Monitor Control Register,
  96 * def. 1 */
  97#define GPIO_MCR                (1<<14)
  98
  99#define GPIO_SPI_ALL            (GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK |\
 100                GPIO_SPI_CSN0 | GPIO_SPI_CSN1)
 101
 102#define GPIO_DATA_MASK          (GPIO_D0 | GPIO_D1_JACKDTC0 | \
 103                GPIO_D2_JACKDTC1 | GPIO_D3 | \
 104                GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK | \
 105                GPIO_D6_CD | GPIO_D7_DD)
 106
 107/* System Control Register GPIO_SCR data bits */
 108/* Mic/Line select relay (0:line, 1:mic) */
 109#define SCR_RELAY               GPIO_D0
 110/* Phantom power drive control (0:5V, 1:48V) */
 111#define SCR_PHP_V               GPIO_D1_JACKDTC0
 112/* H/W mute control (0:Normal, 1:Mute) */
 113#define SCR_MUTE                GPIO_D2_JACKDTC1
 114/* Phantom power control (0:Phantom on, 1:off) */
 115#define SCR_PHP                 GPIO_D3
 116/* Analog input 1/2 Source Select */
 117#define SCR_AIN12_SEL0          GPIO_D4_SPI_CDTO
 118#define SCR_AIN12_SEL1          GPIO_D5_SPI_CCLK
 119/* Analog input 3/4 Source Select (0:line, 1:hi-z) */
 120#define SCR_AIN34_SEL           GPIO_D6_CD
 121/* Codec Power Down (0:power down, 1:normal) */
 122#define SCR_CODEC_PDN           GPIO_D7_DD
 123
 124#define SCR_AIN12_LINE          (0)
 125#define SCR_AIN12_MIC           (SCR_AIN12_SEL0)
 126#define SCR_AIN12_LOWCUT        (SCR_AIN12_SEL1 | SCR_AIN12_SEL0)
 127
 128/* Monitor Control Register GPIO_MCR data bits */
 129/* Input 1/2 to Monitor 1/2 (0:off, 1:on) */
 130#define MCR_IN12_MON12          GPIO_D0
 131/* Input 1/2 to Monitor 3/4 (0:off, 1:on) */
 132#define MCR_IN12_MON34          GPIO_D1_JACKDTC0
 133/* Input 3/4 to Monitor 1/2 (0:off, 1:on) */
 134#define MCR_IN34_MON12          GPIO_D2_JACKDTC1
 135/* Input 3/4 to Monitor 3/4 (0:off, 1:on) */
 136#define MCR_IN34_MON34          GPIO_D3
 137/* Output to Monitor 1/2 (0:off, 1:on) */
 138#define MCR_OUT34_MON12         GPIO_D4_SPI_CDTO
 139/* Output to Monitor 3/4 (0:off, 1:on) */
 140#define MCR_OUT12_MON34         GPIO_D5_SPI_CCLK
 141
 142/* CPLD Register DATA bits */
 143/* Clock Rate Select */
 144#define CPLD_CKS0               GPIO_D0
 145#define CPLD_CKS1               GPIO_D1_JACKDTC0
 146#define CPLD_CKS2               GPIO_D2_JACKDTC1
 147/* Sync Source Select (0:Internal, 1:External) */
 148#define CPLD_SYNC_SEL           GPIO_D3
 149/* Word Clock FS Select (0:FS, 1:256FS) */
 150#define CPLD_WORD_SEL           GPIO_D4_SPI_CDTO
 151/* Coaxial Output Source (IS-Link) (0:SPDIF, 1:I2S) */
 152#define CPLD_COAX_OUT           GPIO_D5_SPI_CCLK
 153/* Input 1/2 Source Select (0:Analog12, 1:An34) */
 154#define CPLD_IN12_SEL           GPIO_D6_CD
 155/* Input 3/4 Source Select (0:Analog34, 1:Digital In) */
 156#define CPLD_IN34_SEL           GPIO_D7_DD
 157
 158/* internal clock (CPLD_SYNC_SEL = 0) options */
 159#define CPLD_CKS_44100HZ        (0)
 160#define CPLD_CKS_48000HZ        (CPLD_CKS0)
 161#define CPLD_CKS_88200HZ        (CPLD_CKS1)
 162#define CPLD_CKS_96000HZ        (CPLD_CKS1 | CPLD_CKS0)
 163#define CPLD_CKS_176400HZ       (CPLD_CKS2)
 164#define CPLD_CKS_192000HZ       (CPLD_CKS2 | CPLD_CKS0)
 165
 166#define CPLD_CKS_MASK           (CPLD_CKS0 | CPLD_CKS1 | CPLD_CKS2)
 167
 168/* external clock (CPLD_SYNC_SEL = 1) options */
 169/* external clock - SPDIF */
 170#define CPLD_EXT_SPDIF  (0 | CPLD_SYNC_SEL)
 171/* external clock - WordClock 1xfs */
 172#define CPLD_EXT_WORDCLOCK_1FS  (CPLD_CKS1 | CPLD_SYNC_SEL)
 173/* external clock - WordClock 256xfs */
 174#define CPLD_EXT_WORDCLOCK_256FS        (CPLD_CKS1 | CPLD_WORD_SEL |\
 175                CPLD_SYNC_SEL)
 176
 177#define EXT_SPDIF_TYPE                  0
 178#define EXT_WORDCLOCK_1FS_TYPE          1
 179#define EXT_WORDCLOCK_256FS_TYPE        2
 180
 181#define AK4620_DFS0             (1<<0)
 182#define AK4620_DFS1             (1<<1)
 183#define AK4620_CKS0             (1<<2)
 184#define AK4620_CKS1             (1<<3)
 185/* Clock and Format Control register */
 186#define AK4620_DFS_REG          0x02
 187
 188/* Deem and Volume Control register */
 189#define AK4620_DEEMVOL_REG      0x03
 190#define AK4620_SMUTE            (1<<7)
 191
 192/*
 193 * Conversion from int value to its binary form. Used for debugging.
 194 * The output buffer must be allocated prior to calling the function.
 195 */
 196static char *get_binary(char *buffer, int value)
 197{
 198        int i, j, pos;
 199        pos = 0;
 200        for (i = 0; i < 4; ++i) {
 201                for (j = 0; j < 8; ++j) {
 202                        if (value & (1 << (31-(i*8 + j))))
 203                                buffer[pos] = '1';
 204                        else
 205                                buffer[pos] = '0';
 206                        pos++;
 207                }
 208                if (i < 3) {
 209                        buffer[pos] = ' ';
 210                        pos++;
 211                }
 212        }
 213        buffer[pos] = '\0';
 214        return buffer;
 215}
 216
 217/*
 218 * Initial setup of the conversion array GPIO <-> rate
 219 */
 220static const unsigned int qtet_rates[] = {
 221        44100, 48000, 88200,
 222        96000, 176400, 192000,
 223};
 224
 225static const unsigned int cks_vals[] = {
 226        CPLD_CKS_44100HZ, CPLD_CKS_48000HZ, CPLD_CKS_88200HZ,
 227        CPLD_CKS_96000HZ, CPLD_CKS_176400HZ, CPLD_CKS_192000HZ,
 228};
 229
 230static const struct snd_pcm_hw_constraint_list qtet_rates_info = {
 231        .count = ARRAY_SIZE(qtet_rates),
 232        .list = qtet_rates,
 233        .mask = 0,
 234};
 235
 236static void qtet_ak4113_write(void *private_data, unsigned char reg,
 237                unsigned char val)
 238{
 239        snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4113_ADDR,
 240                        reg, val);
 241}
 242
 243static unsigned char qtet_ak4113_read(void *private_data, unsigned char reg)
 244{
 245        return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data,
 246                        AK4113_ADDR, reg);
 247}
 248
 249
 250/*
 251 * AK4620 section
 252 */
 253
 254/*
 255 * Write data to addr register of ak4620
 256 */
 257static void qtet_akm_write(struct snd_akm4xxx *ak, int chip,
 258                unsigned char addr, unsigned char data)
 259{
 260        unsigned int tmp, orig_dir;
 261        int idx;
 262        unsigned int addrdata;
 263        struct snd_ice1712 *ice = ak->private_data[0];
 264
 265        if (snd_BUG_ON(chip < 0 || chip >= 4))
 266                return;
 267        /*dev_dbg(ice->card->dev, "Writing to AK4620: chip=%d, addr=0x%x,
 268          data=0x%x\n", chip, addr, data);*/
 269        orig_dir = ice->gpio.get_dir(ice);
 270        ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL);
 271        /* set mask - only SPI bits */
 272        ice->gpio.set_mask(ice, ~GPIO_SPI_ALL);
 273
 274        tmp = ice->gpio.get_data(ice);
 275        /* high all */
 276        tmp |= GPIO_SPI_ALL;
 277        ice->gpio.set_data(ice, tmp);
 278        udelay(100);
 279        /* drop chip select */
 280        if (chip)
 281                /* CODEC 1 */
 282                tmp &= ~GPIO_SPI_CSN1;
 283        else
 284                tmp &= ~GPIO_SPI_CSN0;
 285        ice->gpio.set_data(ice, tmp);
 286        udelay(100);
 287
 288        /* build I2C address + data byte */
 289        addrdata = (AK4620_ADDR << 6) | 0x20 | (addr & 0x1f);
 290        addrdata = (addrdata << 8) | data;
 291        for (idx = 15; idx >= 0; idx--) {
 292                /* drop clock */
 293                tmp &= ~GPIO_D5_SPI_CCLK;
 294                ice->gpio.set_data(ice, tmp);
 295                udelay(100);
 296                /* set data */
 297                if (addrdata & (1 << idx))
 298                        tmp |= GPIO_D4_SPI_CDTO;
 299                else
 300                        tmp &= ~GPIO_D4_SPI_CDTO;
 301                ice->gpio.set_data(ice, tmp);
 302                udelay(100);
 303                /* raise clock */
 304                tmp |= GPIO_D5_SPI_CCLK;
 305                ice->gpio.set_data(ice, tmp);
 306                udelay(100);
 307        }
 308        /* all back to 1 */
 309        tmp |= GPIO_SPI_ALL;
 310        ice->gpio.set_data(ice, tmp);
 311        udelay(100);
 312
 313        /* return all gpios to non-writable */
 314        ice->gpio.set_mask(ice, 0xffffff);
 315        /* restore GPIOs direction */
 316        ice->gpio.set_dir(ice, orig_dir);
 317}
 318
 319static void qtet_akm_set_regs(struct snd_akm4xxx *ak, unsigned char addr,
 320                unsigned char mask, unsigned char value)
 321{
 322        unsigned char tmp;
 323        int chip;
 324        for (chip = 0; chip < ak->num_chips; chip++) {
 325                tmp = snd_akm4xxx_get(ak, chip, addr);
 326                /* clear the bits */
 327                tmp &= ~mask;
 328                /* set the new bits */
 329                tmp |= value;
 330                snd_akm4xxx_write(ak, chip, addr, tmp);
 331        }
 332}
 333
 334/*
 335 * change the rate of AK4620
 336 */
 337static void qtet_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate)
 338{
 339        unsigned char ak4620_dfs;
 340
 341        if (rate == 0)  /* no hint - S/PDIF input is master or the new spdif
 342                           input rate undetected, simply return */
 343                return;
 344
 345        /* adjust DFS on codecs - see datasheet */
 346        if (rate > 108000)
 347                ak4620_dfs = AK4620_DFS1 | AK4620_CKS1;
 348        else if (rate > 54000)
 349                ak4620_dfs = AK4620_DFS0 | AK4620_CKS0;
 350        else
 351                ak4620_dfs = 0;
 352
 353        /* set new value */
 354        qtet_akm_set_regs(ak, AK4620_DFS_REG, AK4620_DFS0 | AK4620_DFS1 |
 355                        AK4620_CKS0 | AK4620_CKS1, ak4620_dfs);
 356}
 357
 358#define AK_CONTROL(xname, xch)  { .name = xname, .num_channels = xch }
 359
 360#define PCM_12_PLAYBACK_VOLUME  "PCM 1/2 Playback Volume"
 361#define PCM_34_PLAYBACK_VOLUME  "PCM 3/4 Playback Volume"
 362#define PCM_12_CAPTURE_VOLUME   "PCM 1/2 Capture Volume"
 363#define PCM_34_CAPTURE_VOLUME   "PCM 3/4 Capture Volume"
 364
 365static const struct snd_akm4xxx_dac_channel qtet_dac[] = {
 366        AK_CONTROL(PCM_12_PLAYBACK_VOLUME, 2),
 367        AK_CONTROL(PCM_34_PLAYBACK_VOLUME, 2),
 368};
 369
 370static const struct snd_akm4xxx_adc_channel qtet_adc[] = {
 371        AK_CONTROL(PCM_12_CAPTURE_VOLUME, 2),
 372        AK_CONTROL(PCM_34_CAPTURE_VOLUME, 2),
 373};
 374
 375static const struct snd_akm4xxx akm_qtet_dac = {
 376        .type = SND_AK4620,
 377        .num_dacs = 4,  /* DAC1 - Output 12
 378        */
 379        .num_adcs = 4,  /* ADC1 - Input 12
 380        */
 381        .ops = {
 382                .write = qtet_akm_write,
 383                .set_rate_val = qtet_akm_set_rate_val,
 384        },
 385        .dac_info = qtet_dac,
 386        .adc_info = qtet_adc,
 387};
 388
 389/* Communication routines with the CPLD */
 390
 391
 392/* Writes data to external register reg, both reg and data are
 393 * GPIO representations */
 394static void reg_write(struct snd_ice1712 *ice, unsigned int reg,
 395                unsigned int data)
 396{
 397        unsigned int tmp;
 398
 399        mutex_lock(&ice->gpio_mutex);
 400        /* set direction of used GPIOs*/
 401        /* all outputs */
 402        tmp = 0x00ffff;
 403        ice->gpio.set_dir(ice, tmp);
 404        /* mask - writable bits */
 405        ice->gpio.set_mask(ice, ~(tmp));
 406        /* write the data */
 407        tmp = ice->gpio.get_data(ice);
 408        tmp &= ~GPIO_DATA_MASK;
 409        tmp |= data;
 410        ice->gpio.set_data(ice, tmp);
 411        udelay(100);
 412        /* drop output enable */
 413        tmp &=  ~GPIO_EX_GPIOE;
 414        ice->gpio.set_data(ice, tmp);
 415        udelay(100);
 416        /* drop the register gpio */
 417        tmp &= ~reg;
 418        ice->gpio.set_data(ice, tmp);
 419        udelay(100);
 420        /* raise the register GPIO */
 421        tmp |= reg;
 422        ice->gpio.set_data(ice, tmp);
 423        udelay(100);
 424
 425        /* raise all data gpios */
 426        tmp |= GPIO_DATA_MASK;
 427        ice->gpio.set_data(ice, tmp);
 428        /* mask - immutable bits */
 429        ice->gpio.set_mask(ice, 0xffffff);
 430        /* outputs only 8-15 */
 431        ice->gpio.set_dir(ice, 0x00ff00);
 432        mutex_unlock(&ice->gpio_mutex);
 433}
 434
 435static unsigned int get_scr(struct snd_ice1712 *ice)
 436{
 437        struct qtet_spec *spec = ice->spec;
 438        return spec->scr;
 439}
 440
 441static unsigned int get_mcr(struct snd_ice1712 *ice)
 442{
 443        struct qtet_spec *spec = ice->spec;
 444        return spec->mcr;
 445}
 446
 447static unsigned int get_cpld(struct snd_ice1712 *ice)
 448{
 449        struct qtet_spec *spec = ice->spec;
 450        return spec->cpld;
 451}
 452
 453static void set_scr(struct snd_ice1712 *ice, unsigned int val)
 454{
 455        struct qtet_spec *spec = ice->spec;
 456        reg_write(ice, GPIO_SCR, val);
 457        spec->scr = val;
 458}
 459
 460static void set_mcr(struct snd_ice1712 *ice, unsigned int val)
 461{
 462        struct qtet_spec *spec = ice->spec;
 463        reg_write(ice, GPIO_MCR, val);
 464        spec->mcr = val;
 465}
 466
 467static void set_cpld(struct snd_ice1712 *ice, unsigned int val)
 468{
 469        struct qtet_spec *spec = ice->spec;
 470        reg_write(ice, GPIO_CPLD_CSN, val);
 471        spec->cpld = val;
 472}
 473
 474static void proc_regs_read(struct snd_info_entry *entry,
 475                struct snd_info_buffer *buffer)
 476{
 477        struct snd_ice1712 *ice = entry->private_data;
 478        char bin_buffer[36];
 479
 480        snd_iprintf(buffer, "SCR:       %s\n", get_binary(bin_buffer,
 481                                get_scr(ice)));
 482        snd_iprintf(buffer, "MCR:       %s\n", get_binary(bin_buffer,
 483                                get_mcr(ice)));
 484        snd_iprintf(buffer, "CPLD:      %s\n", get_binary(bin_buffer,
 485                                get_cpld(ice)));
 486}
 487
 488static void proc_init(struct snd_ice1712 *ice)
 489{
 490        snd_card_ro_proc_new(ice->card, "quartet", ice, proc_regs_read);
 491}
 492
 493static int qtet_mute_get(struct snd_kcontrol *kcontrol,
 494                struct snd_ctl_elem_value *ucontrol)
 495{
 496        struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 497        unsigned int val;
 498        val = get_scr(ice) & SCR_MUTE;
 499        ucontrol->value.integer.value[0] = (val) ? 0 : 1;
 500        return 0;
 501}
 502
 503static int qtet_mute_put(struct snd_kcontrol *kcontrol,
 504                struct snd_ctl_elem_value *ucontrol)
 505{
 506        struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 507        unsigned int old, new, smute;
 508        old = get_scr(ice) & SCR_MUTE;
 509        if (ucontrol->value.integer.value[0]) {
 510                /* unmute */
 511                new = 0;
 512                /* un-smuting DAC */
 513                smute = 0;
 514        } else {
 515                /* mute */
 516                new = SCR_MUTE;
 517                /* smuting DAC */
 518                smute = AK4620_SMUTE;
 519        }
 520        if (old != new) {
 521                struct snd_akm4xxx *ak = ice->akm;
 522                set_scr(ice, (get_scr(ice) & ~SCR_MUTE) | new);
 523                /* set smute */
 524                qtet_akm_set_regs(ak, AK4620_DEEMVOL_REG, AK4620_SMUTE, smute);
 525                return 1;
 526        }
 527        /* no change */
 528        return 0;
 529}
 530
 531static int qtet_ain12_enum_info(struct snd_kcontrol *kcontrol,
 532                struct snd_ctl_elem_info *uinfo)
 533{
 534        static const char * const texts[3] =
 535                {"Line In 1/2", "Mic", "Mic + Low-cut"};
 536        return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
 537}
 538
 539static int qtet_ain12_sw_get(struct snd_kcontrol *kcontrol,
 540                struct snd_ctl_elem_value *ucontrol)
 541{
 542        struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 543        unsigned int val, result;
 544        val = get_scr(ice) & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
 545        switch (val) {
 546        case SCR_AIN12_LINE:
 547                result = 0;
 548                break;
 549        case SCR_AIN12_MIC:
 550                result = 1;
 551                break;
 552        case SCR_AIN12_LOWCUT:
 553                result = 2;
 554                break;
 555        default:
 556                /* BUG - no other combinations allowed */
 557                snd_BUG();
 558                result = 0;
 559        }
 560        ucontrol->value.integer.value[0] = result;
 561        return 0;
 562}
 563
 564static int qtet_ain12_sw_put(struct snd_kcontrol *kcontrol,
 565                struct snd_ctl_elem_value *ucontrol)
 566{
 567        struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 568        unsigned int old, new, tmp, masked_old;
 569        old = new = get_scr(ice);
 570        masked_old = old & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
 571        tmp = ucontrol->value.integer.value[0];
 572        if (tmp == 2)
 573                tmp = 3;        /* binary 10 is not supported */
 574        tmp <<= 4;      /* shifting to SCR_AIN12_SEL0 */
 575        if (tmp != masked_old) {
 576                /* change requested */
 577                switch (tmp) {
 578                case SCR_AIN12_LINE:
 579                        new = old & ~(SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
 580                        set_scr(ice, new);
 581                        /* turn off relay */
 582                        new &= ~SCR_RELAY;
 583                        set_scr(ice, new);
 584                        break;
 585                case SCR_AIN12_MIC:
 586                        /* turn on relay */
 587                        new = old | SCR_RELAY;
 588                        set_scr(ice, new);
 589                        new = (new & ~SCR_AIN12_SEL1) | SCR_AIN12_SEL0;
 590                        set_scr(ice, new);
 591                        break;
 592                case SCR_AIN12_LOWCUT:
 593                        /* turn on relay */
 594                        new = old | SCR_RELAY;
 595                        set_scr(ice, new);
 596                        new |= SCR_AIN12_SEL1 | SCR_AIN12_SEL0;
 597                        set_scr(ice, new);
 598                        break;
 599                default:
 600                        snd_BUG();
 601                }
 602                return 1;
 603        }
 604        /* no change */
 605        return 0;
 606}
 607
 608static int qtet_php_get(struct snd_kcontrol *kcontrol,
 609                struct snd_ctl_elem_value *ucontrol)
 610{
 611        struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 612        unsigned int val;
 613        /* if phantom voltage =48V, phantom on */
 614        val = get_scr(ice) & SCR_PHP_V;
 615        ucontrol->value.integer.value[0] = val ? 1 : 0;
 616        return 0;
 617}
 618
 619static int qtet_php_put(struct snd_kcontrol *kcontrol,
 620                struct snd_ctl_elem_value *ucontrol)
 621{
 622        struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 623        unsigned int old, new;
 624        old = new = get_scr(ice);
 625        if (ucontrol->value.integer.value[0] /* phantom on requested */
 626                        && (~old & SCR_PHP_V)) /* 0 = voltage 5V */ {
 627                /* is off, turn on */
 628                /* turn voltage on first, = 1 */
 629                new = old | SCR_PHP_V;
 630                set_scr(ice, new);
 631                /* turn phantom on, = 0 */
 632                new &= ~SCR_PHP;
 633                set_scr(ice, new);
 634        } else if (!ucontrol->value.integer.value[0] && (old & SCR_PHP_V)) {
 635                /* phantom off requested and 1 = voltage 48V */
 636                /* is on, turn off */
 637                /* turn voltage off first, = 0 */
 638                new = old & ~SCR_PHP_V;
 639                set_scr(ice, new);
 640                /* turn phantom off, = 1 */
 641                new |= SCR_PHP;
 642                set_scr(ice, new);
 643        }
 644        if (old != new)
 645                return 1;
 646        /* no change */
 647        return 0;
 648}
 649
 650#define PRIV_SW(xid, xbit, xreg)        [xid] = {.bit = xbit,\
 651        .set_register = set_##xreg,\
 652        .get_register = get_##xreg, }
 653
 654
 655#define PRIV_ENUM2(xid, xbit, xreg, xtext1, xtext2)     [xid] = {.bit = xbit,\
 656        .set_register = set_##xreg,\
 657        .get_register = get_##xreg,\
 658        .texts = {xtext1, xtext2} }
 659
 660static const struct qtet_kcontrol_private qtet_privates[] = {
 661        PRIV_ENUM2(IN12_SEL, CPLD_IN12_SEL, cpld, "An In 1/2", "An In 3/4"),
 662        PRIV_ENUM2(IN34_SEL, CPLD_IN34_SEL, cpld, "An In 3/4", "IEC958 In"),
 663        PRIV_ENUM2(AIN34_SEL, SCR_AIN34_SEL, scr, "Line In 3/4", "Hi-Z"),
 664        PRIV_ENUM2(COAX_OUT, CPLD_COAX_OUT, cpld, "IEC958", "I2S"),
 665        PRIV_SW(IN12_MON12, MCR_IN12_MON12, mcr),
 666        PRIV_SW(IN12_MON34, MCR_IN12_MON34, mcr),
 667        PRIV_SW(IN34_MON12, MCR_IN34_MON12, mcr),
 668        PRIV_SW(IN34_MON34, MCR_IN34_MON34, mcr),
 669        PRIV_SW(OUT12_MON34, MCR_OUT12_MON34, mcr),
 670        PRIV_SW(OUT34_MON12, MCR_OUT34_MON12, mcr),
 671};
 672
 673static int qtet_enum_info(struct snd_kcontrol *kcontrol,
 674                struct snd_ctl_elem_info *uinfo)
 675{
 676        struct qtet_kcontrol_private private =
 677                qtet_privates[kcontrol->private_value];
 678        return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(private.texts),
 679                                 private.texts);
 680}
 681
 682static int qtet_sw_get(struct snd_kcontrol *kcontrol,
 683                struct snd_ctl_elem_value *ucontrol)
 684{
 685        struct qtet_kcontrol_private private =
 686                qtet_privates[kcontrol->private_value];
 687        struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 688        ucontrol->value.integer.value[0] =
 689                (private.get_register(ice) & private.bit) ? 1 : 0;
 690        return 0;
 691}
 692
 693static int qtet_sw_put(struct snd_kcontrol *kcontrol,
 694                struct snd_ctl_elem_value *ucontrol)
 695{
 696        struct qtet_kcontrol_private private =
 697                qtet_privates[kcontrol->private_value];
 698        struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 699        unsigned int old, new;
 700        old = private.get_register(ice);
 701        if (ucontrol->value.integer.value[0])
 702                new = old | private.bit;
 703        else
 704                new = old & ~private.bit;
 705        if (old != new) {
 706                private.set_register(ice, new);
 707                return 1;
 708        }
 709        /* no change */
 710        return 0;
 711}
 712
 713#define qtet_sw_info    snd_ctl_boolean_mono_info
 714
 715#define QTET_CONTROL(xname, xtype, xpriv)       \
 716        {.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\
 717        .name = xname,\
 718        .info = qtet_##xtype##_info,\
 719        .get = qtet_sw_get,\
 720        .put = qtet_sw_put,\
 721        .private_value = xpriv }
 722
 723static const struct snd_kcontrol_new qtet_controls[] = {
 724        {
 725                .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 726                .name = "Master Playback Switch",
 727                .info = qtet_sw_info,
 728                .get = qtet_mute_get,
 729                .put = qtet_mute_put,
 730                .private_value = 0
 731        },
 732        {
 733                .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 734                .name = "Phantom Power",
 735                .info = qtet_sw_info,
 736                .get = qtet_php_get,
 737                .put = qtet_php_put,
 738                .private_value = 0
 739        },
 740        {
 741                .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 742                .name = "Analog In 1/2 Capture Switch",
 743                .info = qtet_ain12_enum_info,
 744                .get = qtet_ain12_sw_get,
 745                .put = qtet_ain12_sw_put,
 746                .private_value = 0
 747        },
 748        QTET_CONTROL("Analog In 3/4 Capture Switch", enum, AIN34_SEL),
 749        QTET_CONTROL("PCM In 1/2 Capture Switch", enum, IN12_SEL),
 750        QTET_CONTROL("PCM In 3/4 Capture Switch", enum, IN34_SEL),
 751        QTET_CONTROL("Coax Output Source", enum, COAX_OUT),
 752        QTET_CONTROL("Analog In 1/2 to Monitor 1/2", sw, IN12_MON12),
 753        QTET_CONTROL("Analog In 1/2 to Monitor 3/4", sw, IN12_MON34),
 754        QTET_CONTROL("Analog In 3/4 to Monitor 1/2", sw, IN34_MON12),
 755        QTET_CONTROL("Analog In 3/4 to Monitor 3/4", sw, IN34_MON34),
 756        QTET_CONTROL("Output 1/2 to Monitor 3/4", sw, OUT12_MON34),
 757        QTET_CONTROL("Output 3/4 to Monitor 1/2", sw, OUT34_MON12),
 758};
 759
 760static const char * const follower_vols[] = {
 761        PCM_12_PLAYBACK_VOLUME,
 762        PCM_34_PLAYBACK_VOLUME,
 763        NULL
 764};
 765
 766static
 767DECLARE_TLV_DB_SCALE(qtet_master_db_scale, -6350, 50, 1);
 768
 769static struct snd_kcontrol *ctl_find(struct snd_card *card,
 770                                     const char *name)
 771{
 772        struct snd_ctl_elem_id sid = {0};
 773
 774        strscpy(sid.name, name, sizeof(sid.name));
 775        sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
 776        return snd_ctl_find_id(card, &sid);
 777}
 778
 779static void add_followers(struct snd_card *card,
 780                          struct snd_kcontrol *master, const char * const *list)
 781{
 782        for (; *list; list++) {
 783                struct snd_kcontrol *follower = ctl_find(card, *list);
 784                if (follower)
 785                        snd_ctl_add_follower(master, follower);
 786        }
 787}
 788
 789static int qtet_add_controls(struct snd_ice1712 *ice)
 790{
 791        struct qtet_spec *spec = ice->spec;
 792        int err, i;
 793        struct snd_kcontrol *vmaster;
 794        err = snd_ice1712_akm4xxx_build_controls(ice);
 795        if (err < 0)
 796                return err;
 797        for (i = 0; i < ARRAY_SIZE(qtet_controls); i++) {
 798                err = snd_ctl_add(ice->card,
 799                                snd_ctl_new1(&qtet_controls[i], ice));
 800                if (err < 0)
 801                        return err;
 802        }
 803
 804        /* Create virtual master control */
 805        vmaster = snd_ctl_make_virtual_master("Master Playback Volume",
 806                        qtet_master_db_scale);
 807        if (!vmaster)
 808                return -ENOMEM;
 809        add_followers(ice->card, vmaster, follower_vols);
 810        err = snd_ctl_add(ice->card, vmaster);
 811        if (err < 0)
 812                return err;
 813        /* only capture SPDIF over AK4113 */
 814        return snd_ak4113_build(spec->ak4113,
 815                        ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
 816}
 817
 818static inline int qtet_is_spdif_master(struct snd_ice1712 *ice)
 819{
 820        /* CPLD_SYNC_SEL: 0 = internal, 1 = external (i.e. spdif master) */
 821        return (get_cpld(ice) & CPLD_SYNC_SEL) ? 1 : 0;
 822}
 823
 824static unsigned int qtet_get_rate(struct snd_ice1712 *ice)
 825{
 826        int i;
 827        unsigned char result;
 828
 829        result =  get_cpld(ice) & CPLD_CKS_MASK;
 830        for (i = 0; i < ARRAY_SIZE(cks_vals); i++)
 831                if (cks_vals[i] == result)
 832                        return qtet_rates[i];
 833        return 0;
 834}
 835
 836static int get_cks_val(int rate)
 837{
 838        int i;
 839        for (i = 0; i < ARRAY_SIZE(qtet_rates); i++)
 840                if (qtet_rates[i] == rate)
 841                        return cks_vals[i];
 842        return 0;
 843}
 844
 845/* setting new rate */
 846static void qtet_set_rate(struct snd_ice1712 *ice, unsigned int rate)
 847{
 848        unsigned int new;
 849        unsigned char val;
 850        /* switching ice1724 to external clock - supplied by ext. circuits */
 851        val = inb(ICEMT1724(ice, RATE));
 852        outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
 853
 854        new =  (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate);
 855        /* switch to internal clock, drop CPLD_SYNC_SEL */
 856        new &= ~CPLD_SYNC_SEL;
 857        /* dev_dbg(ice->card->dev, "QT - set_rate: old %x, new %x\n",
 858           get_cpld(ice), new); */
 859        set_cpld(ice, new);
 860}
 861
 862static inline unsigned char qtet_set_mclk(struct snd_ice1712 *ice,
 863                unsigned int rate)
 864{
 865        /* no change in master clock */
 866        return 0;
 867}
 868
 869/* setting clock to external - SPDIF */
 870static int qtet_set_spdif_clock(struct snd_ice1712 *ice, int type)
 871{
 872        unsigned int old, new;
 873
 874        old = new = get_cpld(ice);
 875        new &= ~(CPLD_CKS_MASK | CPLD_WORD_SEL);
 876        switch (type) {
 877        case EXT_SPDIF_TYPE:
 878                new |= CPLD_EXT_SPDIF;
 879                break;
 880        case EXT_WORDCLOCK_1FS_TYPE:
 881                new |= CPLD_EXT_WORDCLOCK_1FS;
 882                break;
 883        case EXT_WORDCLOCK_256FS_TYPE:
 884                new |= CPLD_EXT_WORDCLOCK_256FS;
 885                break;
 886        default:
 887                snd_BUG();
 888        }
 889        if (old != new) {
 890                set_cpld(ice, new);
 891                /* changed */
 892                return 1;
 893        }
 894        return 0;
 895}
 896
 897static int qtet_get_spdif_master_type(struct snd_ice1712 *ice)
 898{
 899        unsigned int val;
 900        int result;
 901        val = get_cpld(ice);
 902        /* checking only rate/clock-related bits */
 903        val &= (CPLD_CKS_MASK | CPLD_WORD_SEL | CPLD_SYNC_SEL);
 904        if (!(val & CPLD_SYNC_SEL)) {
 905                /* switched to internal clock, is not any external type */
 906                result = -1;
 907        } else {
 908                switch (val) {
 909                case (CPLD_EXT_SPDIF):
 910                        result = EXT_SPDIF_TYPE;
 911                        break;
 912                case (CPLD_EXT_WORDCLOCK_1FS):
 913                        result = EXT_WORDCLOCK_1FS_TYPE;
 914                        break;
 915                case (CPLD_EXT_WORDCLOCK_256FS):
 916                        result = EXT_WORDCLOCK_256FS_TYPE;
 917                        break;
 918                default:
 919                        /* undefined combination of external clock setup */
 920                        snd_BUG();
 921                        result = 0;
 922                }
 923        }
 924        return result;
 925}
 926
 927/* Called when ak4113 detects change in the input SPDIF stream */
 928static void qtet_ak4113_change(struct ak4113 *ak4113, unsigned char c0,
 929                unsigned char c1)
 930{
 931        struct snd_ice1712 *ice = ak4113->change_callback_private;
 932        int rate;
 933        if ((qtet_get_spdif_master_type(ice) == EXT_SPDIF_TYPE) &&
 934                        c1) {
 935                /* only for SPDIF master mode, rate was changed */
 936                rate = snd_ak4113_external_rate(ak4113);
 937                /* dev_dbg(ice->card->dev, "ak4113 - input rate changed to %d\n",
 938                   rate); */
 939                qtet_akm_set_rate_val(ice->akm, rate);
 940        }
 941}
 942
 943/*
 944 * If clock slaved to SPDIF-IN, setting runtime rate
 945 * to the detected external rate
 946 */
 947static void qtet_spdif_in_open(struct snd_ice1712 *ice,
 948                struct snd_pcm_substream *substream)
 949{
 950        struct qtet_spec *spec = ice->spec;
 951        struct snd_pcm_runtime *runtime = substream->runtime;
 952        int rate;
 953
 954        if (qtet_get_spdif_master_type(ice) != EXT_SPDIF_TYPE)
 955                /* not external SPDIF, no rate limitation */
 956                return;
 957        /* only external SPDIF can detect incoming sample rate */
 958        rate = snd_ak4113_external_rate(spec->ak4113);
 959        if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) {
 960                runtime->hw.rate_min = rate;
 961                runtime->hw.rate_max = rate;
 962        }
 963}
 964
 965/*
 966 * initialize the chip
 967 */
 968static int qtet_init(struct snd_ice1712 *ice)
 969{
 970        static const unsigned char ak4113_init_vals[] = {
 971                /* AK4113_REG_PWRDN */  AK4113_RST | AK4113_PWN |
 972                        AK4113_OCKS0 | AK4113_OCKS1,
 973                /* AK4113_REQ_FORMAT */ AK4113_DIF_I24I2S | AK4113_VTX |
 974                        AK4113_DEM_OFF | AK4113_DEAU,
 975                /* AK4113_REG_IO0 */    AK4113_OPS2 | AK4113_TXE |
 976                        AK4113_XTL_24_576M,
 977                /* AK4113_REG_IO1 */    AK4113_EFH_1024LRCLK | AK4113_IPS(0),
 978                /* AK4113_REG_INT0_MASK */      0,
 979                /* AK4113_REG_INT1_MASK */      0,
 980                /* AK4113_REG_DATDTS */         0,
 981        };
 982        int err;
 983        struct qtet_spec *spec;
 984        struct snd_akm4xxx *ak;
 985        unsigned char val;
 986
 987        /* switching ice1724 to external clock - supplied by ext. circuits */
 988        val = inb(ICEMT1724(ice, RATE));
 989        outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
 990
 991        spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 992        if (!spec)
 993                return -ENOMEM;
 994        /* qtet is clocked by Xilinx array */
 995        ice->hw_rates = &qtet_rates_info;
 996        ice->is_spdif_master = qtet_is_spdif_master;
 997        ice->get_rate = qtet_get_rate;
 998        ice->set_rate = qtet_set_rate;
 999        ice->set_mclk = qtet_set_mclk;
1000        ice->set_spdif_clock = qtet_set_spdif_clock;
1001        ice->get_spdif_master_type = qtet_get_spdif_master_type;
1002        ice->ext_clock_names = ext_clock_names;
1003        ice->ext_clock_count = ARRAY_SIZE(ext_clock_names);
1004        /* since Qtet can detect correct SPDIF-in rate, all streams can be
1005         * limited to this specific rate */
1006        ice->spdif.ops.open = ice->pro_open = qtet_spdif_in_open;
1007        ice->spec = spec;
1008
1009        /* Mute Off */
1010        /* SCR Initialize*/
1011        /* keep codec power down first */
1012        set_scr(ice, SCR_PHP);
1013        udelay(1);
1014        /* codec power up */
1015        set_scr(ice, SCR_PHP | SCR_CODEC_PDN);
1016
1017        /* MCR Initialize */
1018        set_mcr(ice, 0);
1019
1020        /* CPLD Initialize */
1021        set_cpld(ice, 0);
1022
1023
1024        ice->num_total_dacs = 2;
1025        ice->num_total_adcs = 2;
1026
1027        ice->akm = kcalloc(2, sizeof(struct snd_akm4xxx), GFP_KERNEL);
1028        ak = ice->akm;
1029        if (!ak)
1030                return -ENOMEM;
1031        /* only one codec with two chips */
1032        ice->akm_codecs = 1;
1033        err = snd_ice1712_akm4xxx_init(ak, &akm_qtet_dac, NULL, ice);
1034        if (err < 0)
1035                return err;
1036        err = snd_ak4113_create(ice->card,
1037                        qtet_ak4113_read,
1038                        qtet_ak4113_write,
1039                        ak4113_init_vals,
1040                        ice, &spec->ak4113);
1041        if (err < 0)
1042                return err;
1043        /* callback for codecs rate setting */
1044        spec->ak4113->change_callback = qtet_ak4113_change;
1045        spec->ak4113->change_callback_private = ice;
1046        /* AK41143 in Quartet can detect external rate correctly
1047         * (i.e. check_flags = 0) */
1048        spec->ak4113->check_flags = 0;
1049
1050        proc_init(ice);
1051
1052        qtet_set_rate(ice, 44100);
1053        return 0;
1054}
1055
1056static const unsigned char qtet_eeprom[] = {
1057        [ICE_EEP2_SYSCONF]     = 0x28,  /* clock 256(24MHz), mpu401, 1xADC,
1058                                           1xDACs, SPDIF in */
1059        [ICE_EEP2_ACLINK]      = 0x80,  /* I2S */
1060        [ICE_EEP2_I2S]         = 0x78,  /* 96k, 24bit, 192k */
1061        [ICE_EEP2_SPDIF]       = 0xc3,  /* out-en, out-int, in, out-ext */
1062        [ICE_EEP2_GPIO_DIR]    = 0x00,  /* 0-7 inputs, switched to output
1063                                           only during output operations */
1064        [ICE_EEP2_GPIO_DIR1]   = 0xff,  /* 8-15 outputs */
1065        [ICE_EEP2_GPIO_DIR2]   = 0x00,
1066        [ICE_EEP2_GPIO_MASK]   = 0xff,  /* changed only for OUT operations */
1067        [ICE_EEP2_GPIO_MASK1]  = 0x00,
1068        [ICE_EEP2_GPIO_MASK2]  = 0xff,
1069
1070        [ICE_EEP2_GPIO_STATE]  = 0x00, /* inputs */
1071        [ICE_EEP2_GPIO_STATE1] = 0x7d, /* all 1, but GPIO_CPLD_RW
1072                                          and GPIO15 always zero */
1073        [ICE_EEP2_GPIO_STATE2] = 0x00, /* inputs */
1074};
1075
1076/* entry point */
1077struct snd_ice1712_card_info snd_vt1724_qtet_cards[] = {
1078        {
1079                .subvendor = VT1724_SUBDEVICE_QTET,
1080                .name = "Infrasonic Quartet",
1081                .model = "quartet",
1082                .chip_init = qtet_init,
1083                .build_controls = qtet_add_controls,
1084                .eeprom_size = sizeof(qtet_eeprom),
1085                .eeprom_data = qtet_eeprom,
1086        },
1087        { } /* terminator */
1088};
1089