linux/sound/pci/lx6464es/lx_defs.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0-or-later */
   2/* -*- linux-c -*- *
   3 *
   4 * ALSA driver for the digigram lx6464es interface
   5 * adapted upstream headers
   6 *
   7 * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
   8 */
   9
  10#ifndef LX_DEFS_H
  11#define LX_DEFS_H
  12
  13/* code adapted from ethersound.h */
  14#define XES_FREQ_COUNT8_MASK    0x00001FFF /* compteur 25MHz entre 8 ech. */
  15#define XES_FREQ_COUNT8_44_MIN  0x00001288 /* 25M /
  16                                            * [ 44k - ( 44.1k + 48k ) / 2 ]
  17                                            * * 8 */
  18#define XES_FREQ_COUNT8_44_MAX  0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ]
  19                                            * * 8 */
  20#define XES_FREQ_COUNT8_48_MAX  0x00000F08 /* 25M /
  21                                            * [ 48k + ( 44.1k + 48k ) / 2 ]
  22                                            * * 8 */
  23
  24/* code adapted from LXES_registers.h */
  25
  26#define IOCR_OUTPUTS_OFFSET 0   /* (rw) offset for the number of OUTs in the
  27                                 * ConfES register. */
  28#define IOCR_INPUTS_OFFSET  8   /* (rw) offset for the number of INs in the
  29                                 * ConfES register. */
  30#define FREQ_RATIO_OFFSET  19   /* (rw) offset for frequency ratio in the
  31                                 * ConfES register. */
  32#define FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio:
  33                                     * sample rate = frequency rate. */
  34
  35#define CONFES_READ_PART_MASK   0x00070000
  36#define CONFES_WRITE_PART_MASK  0x00F80000
  37
  38/* code adapted from if_drv_mb.h */
  39
  40#define MASK_SYS_STATUS_ERROR   (1L << 31) /* events that lead to a PCI irq if
  41                                            * not yet pending */
  42#define MASK_SYS_STATUS_URUN    (1L << 30)
  43#define MASK_SYS_STATUS_ORUN    (1L << 29)
  44#define MASK_SYS_STATUS_EOBO    (1L << 28)
  45#define MASK_SYS_STATUS_EOBI    (1L << 27)
  46#define MASK_SYS_STATUS_FREQ    (1L << 26)
  47#define MASK_SYS_STATUS_ESA     (1L << 25) /* reserved, this is set by the
  48                                            * XES */
  49#define MASK_SYS_STATUS_TIMER   (1L << 24)
  50
  51#define MASK_SYS_ASYNC_EVENTS   (MASK_SYS_STATUS_ERROR |                \
  52                                 MASK_SYS_STATUS_URUN  |                \
  53                                 MASK_SYS_STATUS_ORUN  |                \
  54                                 MASK_SYS_STATUS_EOBO  |                \
  55                                 MASK_SYS_STATUS_EOBI  |                \
  56                                 MASK_SYS_STATUS_FREQ  |                \
  57                                 MASK_SYS_STATUS_ESA)
  58
  59#define MASK_SYS_PCI_EVENTS             (MASK_SYS_ASYNC_EVENTS |        \
  60                                         MASK_SYS_STATUS_TIMER)
  61
  62#define MASK_SYS_TIMER_COUNT    0x0000FFFF
  63
  64#define MASK_SYS_STATUS_EOT_PLX         (1L << 22) /* event that remains
  65                                                    * internal: reserved fo end
  66                                                    * of plx dma */
  67#define MASK_SYS_STATUS_XES             (1L << 21) /* event that remains
  68                                                    * internal: pending XES
  69                                                    * IRQ */
  70#define MASK_SYS_STATUS_CMD_DONE        (1L << 20) /* alternate command
  71                                                    * management: notify driver
  72                                                    * instead of polling */
  73
  74
  75#define MAX_STREAM_BUFFER 5     /* max amount of stream buffers. */
  76
  77#define MICROBLAZE_IBL_MIN               32
  78#define MICROBLAZE_IBL_DEFAULT          128
  79#define MICROBLAZE_IBL_MAX              512
  80/* #define MASK_GRANULARITY             (2*MICROBLAZE_IBL_MAX-1) */
  81
  82
  83
  84/* command opcodes, see reference for details */
  85
  86/*
  87 the capture bit position in the object_id field in driver commands
  88 depends upon the number of managed channels. For now, 64 IN + 64 OUT are
  89 supported. HOwever, the communication protocol forsees 1024 channels, hence
  90 bit 10 indicates a capture (input) object).
  91*/
  92#define ID_IS_CAPTURE (1L << 10)
  93#define ID_OFFSET       13      /* object ID is at the 13th bit in the
  94                                 * 1st command word.*/
  95#define ID_CH_MASK    0x3F
  96#define OPCODE_OFFSET   24      /* offset of the command opcode in the first
  97                                 * command word.*/
  98
  99enum cmd_mb_opcodes {
 100        CMD_00_INFO_DEBUG               = 0x00,
 101        CMD_01_GET_SYS_CFG              = 0x01,
 102        CMD_02_SET_GRANULARITY          = 0x02,
 103        CMD_03_SET_TIMER_IRQ            = 0x03,
 104        CMD_04_GET_EVENT                = 0x04,
 105        CMD_05_GET_PIPES                = 0x05,
 106
 107        CMD_06_ALLOCATE_PIPE            = 0x06,
 108        CMD_07_RELEASE_PIPE             = 0x07,
 109        CMD_08_ASK_BUFFERS              = 0x08,
 110        CMD_09_STOP_PIPE                = 0x09,
 111        CMD_0A_GET_PIPE_SPL_COUNT       = 0x0a,
 112        CMD_0B_TOGGLE_PIPE_STATE        = 0x0b,
 113
 114        CMD_0C_DEF_STREAM               = 0x0c,
 115        CMD_0D_SET_MUTE                 = 0x0d,
 116        CMD_0E_GET_STREAM_SPL_COUNT     = 0x0e,
 117        CMD_0F_UPDATE_BUFFER            = 0x0f,
 118        CMD_10_GET_BUFFER               = 0x10,
 119        CMD_11_CANCEL_BUFFER            = 0x11,
 120        CMD_12_GET_PEAK                 = 0x12,
 121        CMD_13_SET_STREAM_STATE         = 0x13,
 122        CMD_14_INVALID                  = 0x14,
 123};
 124
 125/* pipe states */
 126enum pipe_state_t {
 127        PSTATE_IDLE     = 0,    /* the pipe is not processed in the XES_IRQ
 128                                 * (free or stopped, or paused). */
 129        PSTATE_RUN      = 1,    /* sustained play/record state. */
 130        PSTATE_PURGE    = 2,    /* the ES channels are now off, render pipes do
 131                                 * not DMA, record pipe do a last DMA. */
 132        PSTATE_ACQUIRE  = 3,    /* the ES channels are now on, render pipes do
 133                                 * not yet increase their sample count, record
 134                                 * pipes do not DMA. */
 135        PSTATE_CLOSING  = 4,    /* the pipe is releasing, and may not yet
 136                                 * receive an "alloc" command. */
 137};
 138
 139/* stream states */
 140enum stream_state_t {
 141        SSTATE_STOP     =  0x00,       /* setting to stop resets the stream spl
 142                                        * count.*/
 143        SSTATE_RUN      = (0x01 << 0), /* start DMA and spl count handling. */
 144        SSTATE_PAUSE    = (0x01 << 1), /* pause DMA and spl count handling. */
 145};
 146
 147/* buffer flags */
 148enum buffer_flags {
 149        BF_VALID        = 0x80, /* set if the buffer is valid, clear if free.*/
 150        BF_CURRENT      = 0x40, /* set if this is the current buffer (there is
 151                                 * always a current buffer).*/
 152        BF_NOTIFY_EOB   = 0x20, /* set if this buffer must cause a PCI event
 153                                 * when finished.*/
 154        BF_CIRCULAR     = 0x10, /* set if buffer[1] must be copied to buffer[0]
 155                                 * by the end of this buffer.*/
 156        BF_64BITS_ADR   = 0x08, /* set if the hi part of the address is valid.*/
 157        BF_xx           = 0x04, /* future extension.*/
 158        BF_EOB          = 0x02, /* set if finished, but not yet free.*/
 159        BF_PAUSE        = 0x01, /* pause stream at buffer end.*/
 160        BF_ZERO         = 0x00, /* no flags (init).*/
 161};
 162
 163/*
 164*       Stream Flags definitions
 165*/
 166enum stream_flags {
 167        SF_ZERO         = 0x00000000, /* no flags (stream invalid). */
 168        SF_VALID        = 0x10000000, /* the stream has a valid DMA_conf
 169                                       * info (setstreamformat). */
 170        SF_XRUN         = 0x20000000, /* the stream is un x-run state. */
 171        SF_START        = 0x40000000, /* the DMA is running.*/
 172        SF_ASIO         = 0x80000000, /* ASIO.*/
 173};
 174
 175
 176#define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */
 177#define PSTATE_OFFSET             28 /* 4 MSBits are status bits */
 178
 179
 180#define MASK_STREAM_HAS_MAPPING (1L << 12)
 181#define MASK_STREAM_IS_ASIO     (1L <<  9)
 182#define STREAM_FMT_OFFSET       10   /* the stream fmt bits start at the 10th
 183                                      * bit in the command word. */
 184
 185#define STREAM_FMT_16b          0x02
 186#define STREAM_FMT_intel        0x01
 187
 188#define FREQ_FIELD_OFFSET       15  /* offset of the freq field in the response
 189                                     * word */
 190
 191#define BUFF_FLAGS_OFFSET         24 /*  offset of the buffer flags in the
 192                                      *  response word. */
 193#define MASK_DATA_SIZE    0x00FFFFFF /* this must match the field size of
 194                                      * datasize in the buffer_t structure. */
 195
 196#define MASK_BUFFER_ID          0xFF /* the cancel command awaits a buffer ID,
 197                                      * may be 0xFF for "current". */
 198
 199
 200/* code adapted from PcxErr_e.h */
 201
 202/* Bits masks */
 203
 204#define ERROR_MASK              0x8000
 205
 206#define SOURCE_MASK             0x7800
 207
 208#define E_SOURCE_BOARD          0x4000 /* 8 >> 1 */
 209#define E_SOURCE_DRV            0x2000 /* 4 >> 1 */
 210#define E_SOURCE_API            0x1000 /* 2 >> 1 */
 211/* Error tools */
 212#define E_SOURCE_TOOLS          0x0800 /* 1 >> 1 */
 213/* Error pcxaudio */
 214#define E_SOURCE_AUDIO          0x1800 /* 3 >> 1 */
 215/* Error virtual pcx */
 216#define E_SOURCE_VPCX           0x2800 /* 5 >> 1 */
 217/* Error dispatcher */
 218#define E_SOURCE_DISPATCHER     0x3000 /* 6 >> 1 */
 219/* Error from CobraNet firmware */
 220#define E_SOURCE_COBRANET       0x3800 /* 7 >> 1 */
 221
 222#define E_SOURCE_USER           0x7800
 223
 224#define CLASS_MASK              0x0700
 225
 226#define CODE_MASK               0x00FF
 227
 228/* Bits values */
 229
 230/* Values for the error/warning bit */
 231#define ERROR_VALUE             0x8000
 232#define WARNING_VALUE           0x0000
 233
 234/* Class values */
 235#define E_CLASS_GENERAL                  0x0000
 236#define E_CLASS_INVALID_CMD              0x0100
 237#define E_CLASS_INVALID_STD_OBJECT       0x0200
 238#define E_CLASS_RSRC_IMPOSSIBLE          0x0300
 239#define E_CLASS_WRONG_CONTEXT            0x0400
 240#define E_CLASS_BAD_SPECIFIC_PARAMETER   0x0500
 241#define E_CLASS_REAL_TIME_ERROR          0x0600
 242#define E_CLASS_DIRECTSHOW               0x0700
 243#define E_CLASS_FREE                     0x0700
 244
 245
 246/* Complete DRV error code for the general class */
 247#define ED_GN           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL)
 248#define ED_CONCURRENCY                  (ED_GN | 0x01)
 249#define ED_DSP_CRASHED                  (ED_GN | 0x02)
 250#define ED_UNKNOWN_BOARD                (ED_GN | 0x03)
 251#define ED_NOT_INSTALLED                (ED_GN | 0x04)
 252#define ED_CANNOT_OPEN_SVC_MANAGER      (ED_GN | 0x05)
 253#define ED_CANNOT_READ_REGISTRY         (ED_GN | 0x06)
 254#define ED_DSP_VERSION_MISMATCH         (ED_GN | 0x07)
 255#define ED_UNAVAILABLE_FEATURE          (ED_GN | 0x08)
 256#define ED_CANCELLED                    (ED_GN | 0x09)
 257#define ED_NO_RESPONSE_AT_IRQA          (ED_GN | 0x10)
 258#define ED_INVALID_ADDRESS              (ED_GN | 0x11)
 259#define ED_DSP_CORRUPTED                (ED_GN | 0x12)
 260#define ED_PENDING_OPERATION            (ED_GN | 0x13)
 261#define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE   (ED_GN | 0x14)
 262#define ED_NET_REGISTER_ERROR               (ED_GN | 0x15)
 263#define ED_NET_THREAD_ERROR                 (ED_GN | 0x16)
 264#define ED_NET_OPEN_ERROR                   (ED_GN | 0x17)
 265#define ED_NET_CLOSE_ERROR                  (ED_GN | 0x18)
 266#define ED_NET_NO_MORE_PACKET               (ED_GN | 0x19)
 267#define ED_NET_NO_MORE_BUFFER               (ED_GN | 0x1A)
 268#define ED_NET_SEND_ERROR                   (ED_GN | 0x1B)
 269#define ED_NET_RECEIVE_ERROR                (ED_GN | 0x1C)
 270#define ED_NET_WRONG_MSG_SIZE               (ED_GN | 0x1D)
 271#define ED_NET_WAIT_ERROR                   (ED_GN | 0x1E)
 272#define ED_NET_EEPROM_ERROR                 (ED_GN | 0x1F)
 273#define ED_INVALID_RS232_COM_NUMBER         (ED_GN | 0x20)
 274#define ED_INVALID_RS232_INIT               (ED_GN | 0x21)
 275#define ED_FILE_ERROR                       (ED_GN | 0x22)
 276#define ED_INVALID_GPIO_CMD                 (ED_GN | 0x23)
 277#define ED_RS232_ALREADY_OPENED             (ED_GN | 0x24)
 278#define ED_RS232_NOT_OPENED                 (ED_GN | 0x25)
 279#define ED_GPIO_ALREADY_OPENED              (ED_GN | 0x26)
 280#define ED_GPIO_NOT_OPENED                  (ED_GN | 0x27)
 281#define ED_REGISTRY_ERROR                   (ED_GN | 0x28) /* <- NCX */
 282#define ED_INVALID_SERVICE                  (ED_GN | 0x29) /* <- NCX */
 283
 284#define ED_READ_FILE_ALREADY_OPENED         (ED_GN | 0x2a) /* <- Decalage
 285                                                            * pour RCX
 286                                                            * (old 0x28)
 287                                                            * */
 288#define ED_READ_FILE_INVALID_COMMAND        (ED_GN | 0x2b) /* ~ */
 289#define ED_READ_FILE_INVALID_PARAMETER      (ED_GN | 0x2c) /* ~ */
 290#define ED_READ_FILE_ALREADY_CLOSED         (ED_GN | 0x2d) /* ~ */
 291#define ED_READ_FILE_NO_INFORMATION         (ED_GN | 0x2e) /* ~ */
 292#define ED_READ_FILE_INVALID_HANDLE         (ED_GN | 0x2f) /* ~ */
 293#define ED_READ_FILE_END_OF_FILE            (ED_GN | 0x30) /* ~ */
 294#define ED_READ_FILE_ERROR                  (ED_GN | 0x31) /* ~ */
 295
 296#define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour
 297                                                             * PCX (old 0x14) */
 298#define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */
 299#define ED_DSP_CRASHED_EXC_ILLEGAL           (ED_GN | 0x34) /* ~ */
 300#define ED_DSP_CRASHED_EXC_TIMER_REENTRY     (ED_GN | 0x35) /* ~ */
 301#define ED_DSP_CRASHED_EXC_FATAL_ERROR       (ED_GN | 0x36) /* ~ */
 302
 303#define ED_FLASH_PCCARD_NOT_PRESENT          (ED_GN | 0x37)
 304
 305#define ED_NO_CURRENT_CLOCK                  (ED_GN | 0x38)
 306
 307/* Complete DRV error code for real time class */
 308#define ED_RT           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR)
 309#define ED_DSP_TIMED_OUT                (ED_RT | 0x01)
 310#define ED_DSP_CHK_TIMED_OUT            (ED_RT | 0x02)
 311#define ED_STREAM_OVERRUN               (ED_RT | 0x03)
 312#define ED_DSP_BUSY                     (ED_RT | 0x04)
 313#define ED_DSP_SEMAPHORE_TIME_OUT       (ED_RT | 0x05)
 314#define ED_BOARD_TIME_OUT               (ED_RT | 0x06)
 315#define ED_XILINX_ERROR                 (ED_RT | 0x07)
 316#define ED_COBRANET_ITF_NOT_RESPONDING  (ED_RT | 0x08)
 317
 318/* Complete BOARD error code for the invaid standard object class */
 319#define EB_ISO          (ERROR_VALUE | E_SOURCE_BOARD | \
 320                         E_CLASS_INVALID_STD_OBJECT)
 321#define EB_INVALID_EFFECT               (EB_ISO | 0x00)
 322#define EB_INVALID_PIPE                 (EB_ISO | 0x40)
 323#define EB_INVALID_STREAM               (EB_ISO | 0x80)
 324#define EB_INVALID_AUDIO                (EB_ISO | 0xC0)
 325
 326/* Complete BOARD error code for impossible resource allocation class */
 327#define EB_RI           (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE)
 328#define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01)
 329#define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE           (EB_RI | 0x02)
 330
 331#define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE               \
 332        EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE
 333#define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE                 \
 334        EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE
 335
 336#define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE     (EB_RI | 0x03)
 337#define EB_TOO_MANY_DIFFERED_CMD                (EB_RI | 0x04)
 338#define EB_RBUFFERS_TABLE_OVERFLOW              (EB_RI | 0x05)
 339#define EB_ALLOCATE_EFFECTS_IMPOSSIBLE          (EB_RI | 0x08)
 340#define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE       (EB_RI | 0x09)
 341#define EB_RBUFFER_NOT_AVAILABLE                (EB_RI | 0x0A)
 342#define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE     (EB_RI | 0x0B)
 343#define EB_STATUS_DIALOG_IMPOSSIBLE             (EB_RI | 0x1D)
 344#define EB_CONTROL_CMD_IMPOSSIBLE               (EB_RI | 0x1E)
 345#define EB_STATUS_SEND_IMPOSSIBLE               (EB_RI | 0x1F)
 346#define EB_ALLOCATE_PIPE_IMPOSSIBLE             (EB_RI | 0x40)
 347#define EB_ALLOCATE_STREAM_IMPOSSIBLE           (EB_RI | 0x80)
 348#define EB_ALLOCATE_AUDIO_IMPOSSIBLE            (EB_RI | 0xC0)
 349
 350/* Complete BOARD error code for wrong call context class */
 351#define EB_WCC          (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT)
 352#define EB_CMD_REFUSED                  (EB_WCC | 0x00)
 353#define EB_START_STREAM_REFUSED         (EB_WCC | 0xFC)
 354#define EB_SPC_REFUSED                  (EB_WCC | 0xFD)
 355#define EB_CSN_REFUSED                  (EB_WCC | 0xFE)
 356#define EB_CSE_REFUSED                  (EB_WCC | 0xFF)
 357
 358
 359
 360
 361#endif /* LX_DEFS_H */
 362