/* adjtimex() tick adjustment test
 *              by:   John Stultz <john.stultz@linaro.org>
 *              (C) Copyright Linaro Limited 2015
 *              Licensed under the GPLv2
 *
 *  To build:
 *      $ gcc adjtick.c -o adjtick -lrt
 *
 *   This program is free software: you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation, either version 2 of the License, or
 *   (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 */
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <sys/time.h>
#include <sys/timex.h>
#include <time.h>

#include "../kselftest.h"

#define CLOCK_MONOTONIC_RAW     4

#define NSEC_PER_SEC            1000000000LL
#define USEC_PER_SEC            1000000

#define MILLION                 1000000

long systick;

long long llabs(long long val)
{
        if (val < 0)
                val = -val;
        return val;
}

unsigned long long ts_to_nsec(struct timespec ts)
{
        return ts.tv_sec * NSEC_PER_SEC + ts.tv_nsec;
}

struct timespec nsec_to_ts(long long ns)
{
        struct timespec ts;

        ts.tv_sec = ns/NSEC_PER_SEC;
        ts.tv_nsec = ns%NSEC_PER_SEC;

        return ts;
}

long long diff_timespec(struct timespec start, struct timespec end)
{
        long long start_ns, end_ns;

        start_ns = ts_to_nsec(start);
        end_ns = ts_to_nsec(end);

        return end_ns - start_ns;
}

void get_monotonic_and_raw(struct timespec *mon, struct timespec *raw)
{
        struct timespec start, mid, end;
        long long diff = 0, tmp;
        int i;

        clock_gettime(CLOCK_MONOTONIC, mon);
        clock_gettime(CLOCK_MONOTONIC_RAW, raw);

        /* Try to get a more tightly bound pairing */
        for (i = 0; i < 3; i++) {
                long long newdiff;

                clock_gettime(CLOCK_MONOTONIC, &start);
                clock_gettime(CLOCK_MONOTONIC_RAW, &mid);
                clock_gettime(CLOCK_MONOTONIC, &end);

                newdiff = diff_timespec(start, end);
                if (diff == 0 || newdiff < diff) {
                        diff = newdiff;
                        *raw = mid;
                        tmp = (ts_to_nsec(start) + ts_to_nsec(end))/2;
                        *mon = nsec_to_ts(tmp);
                }
        }
}

long long get_ppm_drift(void)
{
        struct timespec mon_start, raw_start, mon_end, raw_end;
        long long delta1, delta2, eppm;

        get_monotonic_and_raw(&mon_start, &raw_start);

        sleep(15);

        get_monotonic_and_raw(&mon_end, &raw_end);

        delta1 = diff_timespec(mon_start, mon_end);
        delta2 = diff_timespec(raw_start, raw_end);

        eppm = (delta1*MILLION)/delta2 - MILLION;

        return eppm;
}

int check_tick_adj(long tickval)
{
        long long eppm, ppm;
        struct timex tx1;

        tx1.modes        = ADJ_TICK;
        tx1.modes       |= ADJ_OFFSET;
        tx1.modes       |= ADJ_FREQUENCY;
        tx1.modes       |= ADJ_STATUS;

        tx1.status      = STA_PLL;
        tx1.offset      = 0;
        tx1.freq        = 0;
        tx1.tick        = tickval;

        adjtimex(&tx1);

        sleep(1);

        ppm = ((long long)tickval * MILLION)/systick - MILLION;
        printf("Estimating tick (act: %ld usec, %lld ppm): ", tickval, ppm);

        eppm = get_ppm_drift();
        printf("%lld usec, %lld ppm", systick + (systick * eppm / MILLION), eppm);
        fflush(stdout);

        tx1.modes = 0;
        adjtimex(&tx1);

        if (tx1.offset || tx1.freq || tx1.tick != tickval) {
                printf("        [ERROR]\n");
                printf("\tUnexpected adjtimex return values, make sure ntpd is not running.\n");
                return -1;
        }

        /*
         * Here we use 100ppm difference as an error bound.
         * We likely should see better, but some coarse clocksources
         * cannot match the HZ tick size accurately, so we have a
         * internal correction factor that doesn't scale exactly
         * with the adjustment, resulting in > 10ppm error during
         * a 10% adjustment. 100ppm also gives us more breathing
         * room for interruptions during the measurement.
         */
        if (llabs(eppm - ppm) > 100) {
                printf("        [FAILED]\n");
                return -1;
        }
        printf("        [OK]\n");

        return  0;
}

int main(int argv, char **argc)
{
        struct timespec raw;
        long tick, max, interval, err;
        struct timex tx1;

        err = 0;
        setbuf(stdout, NULL);

        if (clock_gettime(CLOCK_MONOTONIC_RAW, &raw)) {
                printf("ERR: NO CLOCK_MONOTONIC_RAW\n");
                return -1;
        }

        printf("Each iteration takes about 15 seconds\n");

        systick = sysconf(_SC_CLK_TCK);
        systick = USEC_PER_SEC/sysconf(_SC_CLK_TCK);
        max = systick/10; /* +/- 10% */
        interval = max/4; /* in 4 steps each side */

        for (tick = (systick - max); tick < (systick + max); tick += interval) {
                if (check_tick_adj(tick)) {
                        err = 1;
                        break;
                }
        }

        /* Reset things to zero */
        tx1.modes        = ADJ_TICK;
        tx1.modes       |= ADJ_OFFSET;
        tx1.modes       |= ADJ_FREQUENCY;

        tx1.offset       = 0;
        tx1.freq         = 0;
        tx1.tick         = systick;

        adjtimex(&tx1);

        if (err)
                return ksft_exit_fail();

        return ksft_exit_pass();
}