1
2
3
4
5
6
7
8
9
10
11
12
13
14#include "hw.h"
15#include "pxa.h"
16#include "arm-misc.h"
17#include "devices.h"
18#include "sharpsl.h"
19#include "pcmcia.h"
20#include "block.h"
21#include "boards.h"
22#include "i2c.h"
23#include "ssi.h"
24#include "blockdev.h"
25#include "sysbus.h"
26#include "exec-memory.h"
27
28#define TOSA_RAM 0x04000000
29#define TOSA_ROM 0x00800000
30
31#define TOSA_GPIO_USB_IN (5)
32#define TOSA_GPIO_nSD_DETECT (9)
33#define TOSA_GPIO_ON_RESET (19)
34#define TOSA_GPIO_CF_IRQ (21)
35#define TOSA_GPIO_CF_CD (13)
36#define TOSA_GPIO_TC6393XB_INT (15)
37#define TOSA_GPIO_JC_CF_IRQ (36)
38
39#define TOSA_SCOOP_GPIO_BASE 1
40#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2)
41#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3)
42#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4)
43
44#define TOSA_SCOOP_JC_GPIO_BASE 1
45#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0)
46#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1)
47#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2)
48#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5)
49#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7)
50
51#define DAC_BASE 0x4e
52#define DAC_CH1 0
53#define DAC_CH2 1
54
55static void tosa_microdrive_attach(PXA2xxState *cpu)
56{
57 PCMCIACardState *md;
58 DriveInfo *dinfo;
59
60 dinfo = drive_get(IF_IDE, 0, 0);
61 if (!dinfo || dinfo->media_cd)
62 return;
63 md = dscm1xxxx_init(dinfo);
64 pxa2xx_pcmcia_attach(cpu->pcmcia[0], md);
65}
66
67static void tosa_out_switch(void *opaque, int line, int level)
68{
69 switch (line) {
70 case 0:
71 fprintf(stderr, "blue LED %s.\n", level ? "on" : "off");
72 break;
73 case 1:
74 fprintf(stderr, "green LED %s.\n", level ? "on" : "off");
75 break;
76 case 2:
77 fprintf(stderr, "amber LED %s.\n", level ? "on" : "off");
78 break;
79 case 3:
80 fprintf(stderr, "wlan LED %s.\n", level ? "on" : "off");
81 break;
82 default:
83 fprintf(stderr, "Uhandled out event: %d = %d\n", line, level);
84 break;
85 }
86}
87
88
89static void tosa_gpio_setup(PXA2xxState *cpu,
90 DeviceState *scp0,
91 DeviceState *scp1,
92 TC6393xbState *tmio)
93{
94 qemu_irq *outsignals = qemu_allocate_irqs(tosa_out_switch, cpu, 4);
95
96 pxa2xx_mmci_handlers(cpu->mmc,
97 qdev_get_gpio_in(scp0, TOSA_GPIO_SD_WP),
98 qemu_irq_invert(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_nSD_DETECT)));
99
100
101 qdev_connect_gpio_out(cpu->gpio, TOSA_GPIO_ON_RESET, cpu->reset);
102
103
104 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
105 qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_IRQ),
106 qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_CD));
107
108 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
109 qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_JC_CF_IRQ),
110 NULL);
111
112 qdev_connect_gpio_out(scp1, TOSA_GPIO_BT_LED, outsignals[0]);
113 qdev_connect_gpio_out(scp1, TOSA_GPIO_NOTE_LED, outsignals[1]);
114 qdev_connect_gpio_out(scp1, TOSA_GPIO_CHRG_ERR_LED, outsignals[2]);
115 qdev_connect_gpio_out(scp1, TOSA_GPIO_WLAN_LED, outsignals[3]);
116
117 qdev_connect_gpio_out(scp1, TOSA_GPIO_TC6393XB_L3V_ON, tc6393xb_l3v_get(tmio));
118
119
120 qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_USB_IN));
121}
122
123static uint32_t tosa_ssp_tansfer(SSISlave *dev, uint32_t value)
124{
125 fprintf(stderr, "TG: %d %02x\n", value >> 5, value & 0x1f);
126 return 0;
127}
128
129static int tosa_ssp_init(SSISlave *dev)
130{
131
132 return 0;
133}
134
135typedef struct {
136 I2CSlave i2c;
137 int len;
138 char buf[3];
139} TosaDACState;
140
141static int tosa_dac_send(I2CSlave *i2c, uint8_t data)
142{
143 TosaDACState *s = FROM_I2C_SLAVE(TosaDACState, i2c);
144 s->buf[s->len] = data;
145 if (s->len ++ > 2) {
146#ifdef VERBOSE
147 fprintf(stderr, "%s: message too long (%i bytes)\n", __FUNCTION__, s->len);
148#endif
149 return 1;
150 }
151
152 if (s->len == 2) {
153 fprintf(stderr, "dac: channel %d value 0x%02x\n",
154 s->buf[0], s->buf[1]);
155 }
156
157 return 0;
158}
159
160static void tosa_dac_event(I2CSlave *i2c, enum i2c_event event)
161{
162 TosaDACState *s = FROM_I2C_SLAVE(TosaDACState, i2c);
163 s->len = 0;
164 switch (event) {
165 case I2C_START_SEND:
166 break;
167 case I2C_START_RECV:
168 printf("%s: recv not supported!!!\n", __FUNCTION__);
169 break;
170 case I2C_FINISH:
171#ifdef VERBOSE
172 if (s->len < 2)
173 printf("%s: message too short (%i bytes)\n", __FUNCTION__, s->len);
174 if (s->len > 2)
175 printf("%s: message too long\n", __FUNCTION__);
176#endif
177 break;
178 default:
179 break;
180 }
181}
182
183static int tosa_dac_recv(I2CSlave *s)
184{
185 printf("%s: recv not supported!!!\n", __FUNCTION__);
186 return -1;
187}
188
189static int tosa_dac_init(I2CSlave *i2c)
190{
191
192 return 0;
193}
194
195static void tosa_tg_init(PXA2xxState *cpu)
196{
197 i2c_bus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
198 i2c_create_slave(bus, "tosa_dac", DAC_BASE);
199 ssi_create_slave(cpu->ssp[1], "tosa-ssp");
200}
201
202
203static struct arm_boot_info tosa_binfo = {
204 .loader_start = PXA2XX_SDRAM_BASE,
205 .ram_size = 0x04000000,
206};
207
208static void tosa_init(QEMUMachineInitArgs *args)
209{
210 const char *cpu_model = args->cpu_model;
211 const char *kernel_filename = args->kernel_filename;
212 const char *kernel_cmdline = args->kernel_cmdline;
213 const char *initrd_filename = args->initrd_filename;
214 MemoryRegion *address_space_mem = get_system_memory();
215 MemoryRegion *rom = g_new(MemoryRegion, 1);
216 PXA2xxState *mpu;
217 TC6393xbState *tmio;
218 DeviceState *scp0, *scp1;
219
220 if (!cpu_model)
221 cpu_model = "pxa255";
222
223 mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size);
224
225 memory_region_init_ram(rom, "tosa.rom", TOSA_ROM);
226 vmstate_register_ram_global(rom);
227 memory_region_set_readonly(rom, true);
228 memory_region_add_subregion(address_space_mem, 0, rom);
229
230 tmio = tc6393xb_init(address_space_mem, 0x10000000,
231 qdev_get_gpio_in(mpu->gpio, TOSA_GPIO_TC6393XB_INT));
232
233 scp0 = sysbus_create_simple("scoop", 0x08800000, NULL);
234 scp1 = sysbus_create_simple("scoop", 0x14800040, NULL);
235
236 tosa_gpio_setup(mpu, scp0, scp1, tmio);
237
238 tosa_microdrive_attach(mpu);
239
240 tosa_tg_init(mpu);
241
242 tosa_binfo.kernel_filename = kernel_filename;
243 tosa_binfo.kernel_cmdline = kernel_cmdline;
244 tosa_binfo.initrd_filename = initrd_filename;
245 tosa_binfo.board_id = 0x208;
246 arm_load_kernel(mpu->cpu, &tosa_binfo);
247 sl_bootparam_write(SL_PXA_PARAM_BASE);
248}
249
250static QEMUMachine tosapda_machine = {
251 .name = "tosa",
252 .desc = "Tosa PDA (PXA255)",
253 .init = tosa_init,
254};
255
256static void tosapda_machine_init(void)
257{
258 qemu_register_machine(&tosapda_machine);
259}
260
261machine_init(tosapda_machine_init);
262
263static void tosa_dac_class_init(ObjectClass *klass, void *data)
264{
265 I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
266
267 k->init = tosa_dac_init;
268 k->event = tosa_dac_event;
269 k->recv = tosa_dac_recv;
270 k->send = tosa_dac_send;
271}
272
273static TypeInfo tosa_dac_info = {
274 .name = "tosa_dac",
275 .parent = TYPE_I2C_SLAVE,
276 .instance_size = sizeof(TosaDACState),
277 .class_init = tosa_dac_class_init,
278};
279
280static void tosa_ssp_class_init(ObjectClass *klass, void *data)
281{
282 SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
283
284 k->init = tosa_ssp_init;
285 k->transfer = tosa_ssp_tansfer;
286}
287
288static TypeInfo tosa_ssp_info = {
289 .name = "tosa-ssp",
290 .parent = TYPE_SSI_SLAVE,
291 .instance_size = sizeof(SSISlave),
292 .class_init = tosa_ssp_class_init,
293};
294
295static void tosa_register_types(void)
296{
297 type_register_static(&tosa_dac_info);
298 type_register_static(&tosa_ssp_info);
299}
300
301type_init(tosa_register_types)
302
