1
2
3
4
5
6
7
8
9
10
11#include "qemu-common.h"
12#include "qemu/error-report.h"
13#include "hw/usb.h"
14#include "hw/usb/desc.h"
15#include "char/char.h"
16
17
18
19#ifdef DEBUG_Serial
20#define DPRINTF(fmt, ...) \
21do { printf("usb-serial: " fmt , ## __VA_ARGS__); } while (0)
22#else
23#define DPRINTF(fmt, ...) do {} while(0)
24#endif
25
26#define RECV_BUF 384
27
28
29#define FTDI_RESET 0
30#define FTDI_SET_MDM_CTRL 1
31#define FTDI_SET_FLOW_CTRL 2
32#define FTDI_SET_BAUD 3
33#define FTDI_SET_DATA 4
34#define FTDI_GET_MDM_ST 5
35#define FTDI_SET_EVENT_CHR 6
36#define FTDI_SET_ERROR_CHR 7
37#define FTDI_SET_LATENCY 9
38#define FTDI_GET_LATENCY 10
39
40#define DeviceOutVendor ((USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)
41#define DeviceInVendor ((USB_DIR_IN |USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)
42
43
44
45#define FTDI_RESET_SIO 0
46#define FTDI_RESET_RX 1
47#define FTDI_RESET_TX 2
48
49
50
51#define FTDI_DTR 1
52#define FTDI_SET_DTR (FTDI_DTR << 8)
53#define FTDI_RTS 2
54#define FTDI_SET_RTS (FTDI_RTS << 8)
55
56
57
58#define FTDI_RTS_CTS_HS 1
59#define FTDI_DTR_DSR_HS 2
60#define FTDI_XON_XOFF_HS 4
61
62
63
64#define FTDI_PARITY (0x7 << 8)
65#define FTDI_ODD (0x1 << 8)
66#define FTDI_EVEN (0x2 << 8)
67#define FTDI_MARK (0x3 << 8)
68#define FTDI_SPACE (0x4 << 8)
69
70#define FTDI_STOP (0x3 << 11)
71#define FTDI_STOP1 (0x0 << 11)
72#define FTDI_STOP15 (0x1 << 11)
73#define FTDI_STOP2 (0x2 << 11)
74
75
76
77#define FTDI_CTS (1<<4)
78#define FTDI_DSR (1<<5)
79#define FTDI_RI (1<<6)
80#define FTDI_RLSD (1<<7)
81
82
83
84#define FTDI_DR (1<<0)
85#define FTDI_OE (1<<1)
86#define FTDI_PE (1<<2)
87#define FTDI_FE (1<<3)
88#define FTDI_BI (1<<4)
89#define FTDI_THRE (1<<5)
90#define FTDI_TEMT (1<<6)
91#define FTDI_FIFO (1<<7)
92
93typedef struct {
94 USBDevice dev;
95 uint8_t recv_buf[RECV_BUF];
96 uint16_t recv_ptr;
97 uint16_t recv_used;
98 uint8_t event_chr;
99 uint8_t error_chr;
100 uint8_t event_trigger;
101 QEMUSerialSetParams params;
102 int latency;
103 CharDriverState *cs;
104} USBSerialState;
105
106enum {
107 STR_MANUFACTURER = 1,
108 STR_PRODUCT_SERIAL,
109 STR_PRODUCT_BRAILLE,
110 STR_SERIALNUMBER,
111};
112
113static const USBDescStrings desc_strings = {
114 [STR_MANUFACTURER] = "QEMU",
115 [STR_PRODUCT_SERIAL] = "QEMU USB SERIAL",
116 [STR_PRODUCT_BRAILLE] = "QEMU USB BAUM BRAILLE",
117 [STR_SERIALNUMBER] = "1",
118};
119
120static const USBDescIface desc_iface0 = {
121 .bInterfaceNumber = 0,
122 .bNumEndpoints = 2,
123 .bInterfaceClass = 0xff,
124 .bInterfaceSubClass = 0xff,
125 .bInterfaceProtocol = 0xff,
126 .eps = (USBDescEndpoint[]) {
127 {
128 .bEndpointAddress = USB_DIR_IN | 0x01,
129 .bmAttributes = USB_ENDPOINT_XFER_BULK,
130 .wMaxPacketSize = 64,
131 },{
132 .bEndpointAddress = USB_DIR_OUT | 0x02,
133 .bmAttributes = USB_ENDPOINT_XFER_BULK,
134 .wMaxPacketSize = 64,
135 },
136 }
137};
138
139static const USBDescDevice desc_device = {
140 .bcdUSB = 0x0200,
141 .bMaxPacketSize0 = 8,
142 .bNumConfigurations = 1,
143 .confs = (USBDescConfig[]) {
144 {
145 .bNumInterfaces = 1,
146 .bConfigurationValue = 1,
147 .bmAttributes = 0x80,
148 .bMaxPower = 50,
149 .nif = 1,
150 .ifs = &desc_iface0,
151 },
152 },
153};
154
155static const USBDesc desc_serial = {
156 .id = {
157 .idVendor = 0x0403,
158 .idProduct = 0x6001,
159 .bcdDevice = 0x0400,
160 .iManufacturer = STR_MANUFACTURER,
161 .iProduct = STR_PRODUCT_SERIAL,
162 .iSerialNumber = STR_SERIALNUMBER,
163 },
164 .full = &desc_device,
165 .str = desc_strings,
166};
167
168static const USBDesc desc_braille = {
169 .id = {
170 .idVendor = 0x0403,
171 .idProduct = 0xfe72,
172 .bcdDevice = 0x0400,
173 .iManufacturer = STR_MANUFACTURER,
174 .iProduct = STR_PRODUCT_BRAILLE,
175 .iSerialNumber = STR_SERIALNUMBER,
176 },
177 .full = &desc_device,
178 .str = desc_strings,
179};
180
181static void usb_serial_reset(USBSerialState *s)
182{
183
184 s->event_chr = 0x0d;
185 s->event_trigger = 0;
186 s->recv_ptr = 0;
187 s->recv_used = 0;
188
189}
190
191static void usb_serial_handle_reset(USBDevice *dev)
192{
193 USBSerialState *s = (USBSerialState *)dev;
194
195 DPRINTF("Reset\n");
196
197 usb_serial_reset(s);
198
199}
200
201static uint8_t usb_get_modem_lines(USBSerialState *s)
202{
203 int flags;
204 uint8_t ret;
205
206 if (qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP)
207 return FTDI_CTS|FTDI_DSR|FTDI_RLSD;
208
209 ret = 0;
210 if (flags & CHR_TIOCM_CTS)
211 ret |= FTDI_CTS;
212 if (flags & CHR_TIOCM_DSR)
213 ret |= FTDI_DSR;
214 if (flags & CHR_TIOCM_RI)
215 ret |= FTDI_RI;
216 if (flags & CHR_TIOCM_CAR)
217 ret |= FTDI_RLSD;
218
219 return ret;
220}
221
222static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
223 int request, int value, int index, int length, uint8_t *data)
224{
225 USBSerialState *s = (USBSerialState *)dev;
226 int ret;
227
228 DPRINTF("got control %x, value %x\n",request, value);
229 ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
230 if (ret >= 0) {
231 return;
232 }
233
234 switch (request) {
235 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
236 break;
237
238
239 case DeviceOutVendor | FTDI_RESET:
240 switch (value) {
241 case FTDI_RESET_SIO:
242 usb_serial_reset(s);
243 break;
244 case FTDI_RESET_RX:
245 s->recv_ptr = 0;
246 s->recv_used = 0;
247
248 break;
249 case FTDI_RESET_TX:
250
251 break;
252 }
253 break;
254 case DeviceOutVendor | FTDI_SET_MDM_CTRL:
255 {
256 static int flags;
257 qemu_chr_fe_ioctl(s->cs,CHR_IOCTL_SERIAL_GET_TIOCM, &flags);
258 if (value & FTDI_SET_RTS) {
259 if (value & FTDI_RTS)
260 flags |= CHR_TIOCM_RTS;
261 else
262 flags &= ~CHR_TIOCM_RTS;
263 }
264 if (value & FTDI_SET_DTR) {
265 if (value & FTDI_DTR)
266 flags |= CHR_TIOCM_DTR;
267 else
268 flags &= ~CHR_TIOCM_DTR;
269 }
270 qemu_chr_fe_ioctl(s->cs,CHR_IOCTL_SERIAL_SET_TIOCM, &flags);
271 break;
272 }
273 case DeviceOutVendor | FTDI_SET_FLOW_CTRL:
274
275 break;
276 case DeviceOutVendor | FTDI_SET_BAUD: {
277 static const int subdivisors8[8] = { 0, 4, 2, 1, 3, 5, 6, 7 };
278 int subdivisor8 = subdivisors8[((value & 0xc000) >> 14)
279 | ((index & 1) << 2)];
280 int divisor = value & 0x3fff;
281
282
283 if (divisor == 1 && subdivisor8 == 0)
284 subdivisor8 = 4;
285 if (divisor == 0 && subdivisor8 == 0)
286 divisor = 1;
287
288 s->params.speed = (48000000 / 2) / (8 * divisor + subdivisor8);
289 qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);
290 break;
291 }
292 case DeviceOutVendor | FTDI_SET_DATA:
293 switch (value & FTDI_PARITY) {
294 case 0:
295 s->params.parity = 'N';
296 break;
297 case FTDI_ODD:
298 s->params.parity = 'O';
299 break;
300 case FTDI_EVEN:
301 s->params.parity = 'E';
302 break;
303 default:
304 DPRINTF("unsupported parity %d\n", value & FTDI_PARITY);
305 goto fail;
306 }
307 switch (value & FTDI_STOP) {
308 case FTDI_STOP1:
309 s->params.stop_bits = 1;
310 break;
311 case FTDI_STOP2:
312 s->params.stop_bits = 2;
313 break;
314 default:
315 DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP);
316 goto fail;
317 }
318 qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);
319
320 break;
321 case DeviceInVendor | FTDI_GET_MDM_ST:
322 data[0] = usb_get_modem_lines(s) | 1;
323 data[1] = 0;
324 p->actual_length = 2;
325 break;
326 case DeviceOutVendor | FTDI_SET_EVENT_CHR:
327
328 s->event_chr = value;
329 break;
330 case DeviceOutVendor | FTDI_SET_ERROR_CHR:
331
332 s->error_chr = value;
333 break;
334 case DeviceOutVendor | FTDI_SET_LATENCY:
335 s->latency = value;
336 break;
337 case DeviceInVendor | FTDI_GET_LATENCY:
338 data[0] = s->latency;
339 p->actual_length = 1;
340 break;
341 default:
342 fail:
343 DPRINTF("got unsupported/bogus control %x, value %x\n", request, value);
344 p->status = USB_RET_STALL;
345 break;
346 }
347}
348
349static void usb_serial_handle_data(USBDevice *dev, USBPacket *p)
350{
351 USBSerialState *s = (USBSerialState *)dev;
352 uint8_t devep = p->ep->nr;
353 struct iovec *iov;
354 uint8_t header[2];
355 int i, first_len, len;
356
357 switch (p->pid) {
358 case USB_TOKEN_OUT:
359 if (devep != 2)
360 goto fail;
361 for (i = 0; i < p->iov.niov; i++) {
362 iov = p->iov.iov + i;
363 qemu_chr_fe_write(s->cs, iov->iov_base, iov->iov_len);
364 }
365 p->actual_length = p->iov.size;
366 break;
367
368 case USB_TOKEN_IN:
369 if (devep != 1)
370 goto fail;
371 first_len = RECV_BUF - s->recv_ptr;
372 len = p->iov.size;
373 if (len <= 2) {
374 p->status = USB_RET_NAK;
375 break;
376 }
377 header[0] = usb_get_modem_lines(s) | 1;
378
379
380 if (s->event_trigger && s->event_trigger & FTDI_BI) {
381 s->event_trigger &= ~FTDI_BI;
382 header[1] = FTDI_BI;
383 usb_packet_copy(p, header, 2);
384 break;
385 } else {
386 header[1] = 0;
387 }
388 len -= 2;
389 if (len > s->recv_used)
390 len = s->recv_used;
391 if (!len) {
392 p->status = USB_RET_NAK;
393 break;
394 }
395 if (first_len > len)
396 first_len = len;
397 usb_packet_copy(p, header, 2);
398 usb_packet_copy(p, s->recv_buf + s->recv_ptr, first_len);
399 if (len > first_len)
400 usb_packet_copy(p, s->recv_buf, len - first_len);
401 s->recv_used -= len;
402 s->recv_ptr = (s->recv_ptr + len) % RECV_BUF;
403 break;
404
405 default:
406 DPRINTF("Bad token\n");
407 fail:
408 p->status = USB_RET_STALL;
409 break;
410 }
411}
412
413static void usb_serial_handle_destroy(USBDevice *dev)
414{
415 USBSerialState *s = (USBSerialState *)dev;
416
417 qemu_chr_add_handlers(s->cs, NULL, NULL, NULL, NULL);
418}
419
420static int usb_serial_can_read(void *opaque)
421{
422 USBSerialState *s = opaque;
423
424 if (!s->dev.attached) {
425 return 0;
426 }
427 return RECV_BUF - s->recv_used;
428}
429
430static void usb_serial_read(void *opaque, const uint8_t *buf, int size)
431{
432 USBSerialState *s = opaque;
433 int first_size, start;
434
435
436 if (size > (RECV_BUF - s->recv_used))
437 size = RECV_BUF - s->recv_used;
438
439 start = s->recv_ptr + s->recv_used;
440 if (start < RECV_BUF) {
441
442 first_size = RECV_BUF - start;
443 if (first_size > size)
444 first_size = size;
445
446 memcpy(s->recv_buf + start, buf, first_size);
447
448
449 if (size > first_size)
450 memcpy(s->recv_buf, buf + first_size, size - first_size);
451 } else {
452 start -= RECV_BUF;
453 memcpy(s->recv_buf + start, buf, size);
454 }
455 s->recv_used += size;
456}
457
458static void usb_serial_event(void *opaque, int event)
459{
460 USBSerialState *s = opaque;
461
462 switch (event) {
463 case CHR_EVENT_BREAK:
464 s->event_trigger |= FTDI_BI;
465 break;
466 case CHR_EVENT_FOCUS:
467 break;
468 case CHR_EVENT_OPENED:
469 if (!s->dev.attached) {
470 usb_device_attach(&s->dev);
471 }
472 break;
473 case CHR_EVENT_CLOSED:
474 if (s->dev.attached) {
475 usb_device_detach(&s->dev);
476 }
477 break;
478 }
479}
480
481static int usb_serial_initfn(USBDevice *dev)
482{
483 USBSerialState *s = DO_UPCAST(USBSerialState, dev, dev);
484
485 usb_desc_create_serial(dev);
486 usb_desc_init(dev);
487 dev->auto_attach = 0;
488
489 if (!s->cs) {
490 error_report("Property chardev is required");
491 return -1;
492 }
493
494 qemu_chr_add_handlers(s->cs, usb_serial_can_read, usb_serial_read,
495 usb_serial_event, s);
496 usb_serial_handle_reset(dev);
497
498 if (s->cs->opened && !dev->attached) {
499 usb_device_attach(dev);
500 }
501 return 0;
502}
503
504static USBDevice *usb_serial_init(USBBus *bus, const char *filename)
505{
506 USBDevice *dev;
507 CharDriverState *cdrv;
508 uint32_t vendorid = 0, productid = 0;
509 char label[32];
510 static int index;
511
512 while (*filename && *filename != ':') {
513 const char *p;
514 char *e;
515 if (strstart(filename, "vendorid=", &p)) {
516 vendorid = strtol(p, &e, 16);
517 if (e == p || (*e && *e != ',' && *e != ':')) {
518 error_report("bogus vendor ID %s", p);
519 return NULL;
520 }
521 filename = e;
522 } else if (strstart(filename, "productid=", &p)) {
523 productid = strtol(p, &e, 16);
524 if (e == p || (*e && *e != ',' && *e != ':')) {
525 error_report("bogus product ID %s", p);
526 return NULL;
527 }
528 filename = e;
529 } else {
530 error_report("unrecognized serial USB option %s", filename);
531 return NULL;
532 }
533 while(*filename == ',')
534 filename++;
535 }
536 if (!*filename) {
537 error_report("character device specification needed");
538 return NULL;
539 }
540 filename++;
541
542 snprintf(label, sizeof(label), "usbserial%d", index++);
543 cdrv = qemu_chr_new(label, filename, NULL);
544 if (!cdrv)
545 return NULL;
546
547 dev = usb_create(bus, "usb-serial");
548 if (!dev) {
549 return NULL;
550 }
551 qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);
552 if (vendorid)
553 qdev_prop_set_uint16(&dev->qdev, "vendorid", vendorid);
554 if (productid)
555 qdev_prop_set_uint16(&dev->qdev, "productid", productid);
556 qdev_init_nofail(&dev->qdev);
557
558 return dev;
559}
560
561static USBDevice *usb_braille_init(USBBus *bus, const char *unused)
562{
563 USBDevice *dev;
564 CharDriverState *cdrv;
565
566 cdrv = qemu_chr_new("braille", "braille", NULL);
567 if (!cdrv)
568 return NULL;
569
570 dev = usb_create(bus, "usb-braille");
571 qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);
572 qdev_init_nofail(&dev->qdev);
573
574 return dev;
575}
576
577static const VMStateDescription vmstate_usb_serial = {
578 .name = "usb-serial",
579 .unmigratable = 1,
580};
581
582static Property serial_properties[] = {
583 DEFINE_PROP_CHR("chardev", USBSerialState, cs),
584 DEFINE_PROP_END_OF_LIST(),
585};
586
587static void usb_serial_class_initfn(ObjectClass *klass, void *data)
588{
589 DeviceClass *dc = DEVICE_CLASS(klass);
590 USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
591
592 uc->init = usb_serial_initfn;
593 uc->product_desc = "QEMU USB Serial";
594 uc->usb_desc = &desc_serial;
595 uc->handle_reset = usb_serial_handle_reset;
596 uc->handle_control = usb_serial_handle_control;
597 uc->handle_data = usb_serial_handle_data;
598 uc->handle_destroy = usb_serial_handle_destroy;
599 dc->vmsd = &vmstate_usb_serial;
600 dc->props = serial_properties;
601}
602
603static const TypeInfo serial_info = {
604 .name = "usb-serial",
605 .parent = TYPE_USB_DEVICE,
606 .instance_size = sizeof(USBSerialState),
607 .class_init = usb_serial_class_initfn,
608};
609
610static Property braille_properties[] = {
611 DEFINE_PROP_CHR("chardev", USBSerialState, cs),
612 DEFINE_PROP_END_OF_LIST(),
613};
614
615static void usb_braille_class_initfn(ObjectClass *klass, void *data)
616{
617 DeviceClass *dc = DEVICE_CLASS(klass);
618 USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
619
620 uc->init = usb_serial_initfn;
621 uc->product_desc = "QEMU USB Braille";
622 uc->usb_desc = &desc_braille;
623 uc->handle_reset = usb_serial_handle_reset;
624 uc->handle_control = usb_serial_handle_control;
625 uc->handle_data = usb_serial_handle_data;
626 uc->handle_destroy = usb_serial_handle_destroy;
627 dc->vmsd = &vmstate_usb_serial;
628 dc->props = braille_properties;
629}
630
631static const TypeInfo braille_info = {
632 .name = "usb-braille",
633 .parent = TYPE_USB_DEVICE,
634 .instance_size = sizeof(USBSerialState),
635 .class_init = usb_braille_class_initfn,
636};
637
638static void usb_serial_register_types(void)
639{
640 type_register_static(&serial_info);
641 usb_legacy_register("usb-serial", "serial", usb_serial_init);
642 type_register_static(&braille_info);
643 usb_legacy_register("usb-braille", "braille", usb_braille_init);
644}
645
646type_init(usb_serial_register_types)
647
