qemu/hw/ide/atapi.c
<<
>>
Prefs
   1/*
   2 * QEMU ATAPI Emulation
   3 *
   4 * Copyright (c) 2003 Fabrice Bellard
   5 * Copyright (c) 2006 Openedhand Ltd.
   6 *
   7 * Permission is hereby granted, free of charge, to any person obtaining a copy
   8 * of this software and associated documentation files (the "Software"), to deal
   9 * in the Software without restriction, including without limitation the rights
  10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11 * copies of the Software, and to permit persons to whom the Software is
  12 * furnished to do so, subject to the following conditions:
  13 *
  14 * The above copyright notice and this permission notice shall be included in
  15 * all copies or substantial portions of the Software.
  16 *
  17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23 * THE SOFTWARE.
  24 */
  25
  26#include "qemu/osdep.h"
  27#include "hw/ide/internal.h"
  28#include "hw/scsi/scsi.h"
  29#include "sysemu/block-backend.h"
  30#include "trace.h"
  31
  32#define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS)
  33#define ATAPI_SECTOR_SIZE (1 << ATAPI_SECTOR_BITS)
  34
  35static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret);
  36
  37static void padstr8(uint8_t *buf, int buf_size, const char *src)
  38{
  39    int i;
  40    for(i = 0; i < buf_size; i++) {
  41        if (*src)
  42            buf[i] = *src++;
  43        else
  44            buf[i] = ' ';
  45    }
  46}
  47
  48static inline void cpu_to_ube16(uint8_t *buf, int val)
  49{
  50    buf[0] = val >> 8;
  51    buf[1] = val & 0xff;
  52}
  53
  54static inline void cpu_to_ube32(uint8_t *buf, unsigned int val)
  55{
  56    buf[0] = val >> 24;
  57    buf[1] = val >> 16;
  58    buf[2] = val >> 8;
  59    buf[3] = val & 0xff;
  60}
  61
  62static inline int ube16_to_cpu(const uint8_t *buf)
  63{
  64    return (buf[0] << 8) | buf[1];
  65}
  66
  67static inline int ube32_to_cpu(const uint8_t *buf)
  68{
  69    return (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
  70}
  71
  72static void lba_to_msf(uint8_t *buf, int lba)
  73{
  74    lba += 150;
  75    buf[0] = (lba / 75) / 60;
  76    buf[1] = (lba / 75) % 60;
  77    buf[2] = lba % 75;
  78}
  79
  80static inline int media_present(IDEState *s)
  81{
  82    return !s->tray_open && s->nb_sectors > 0;
  83}
  84
  85/* XXX: DVDs that could fit on a CD will be reported as a CD */
  86static inline int media_is_dvd(IDEState *s)
  87{
  88    return (media_present(s) && s->nb_sectors > CD_MAX_SECTORS);
  89}
  90
  91static inline int media_is_cd(IDEState *s)
  92{
  93    return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS);
  94}
  95
  96static void cd_data_to_raw(uint8_t *buf, int lba)
  97{
  98    /* sync bytes */
  99    buf[0] = 0x00;
 100    memset(buf + 1, 0xff, 10);
 101    buf[11] = 0x00;
 102    buf += 12;
 103    /* MSF */
 104    lba_to_msf(buf, lba);
 105    buf[3] = 0x01; /* mode 1 data */
 106    buf += 4;
 107    /* data */
 108    buf += 2048;
 109    /* XXX: ECC not computed */
 110    memset(buf, 0, 288);
 111}
 112
 113static int
 114cd_read_sector_sync(IDEState *s)
 115{
 116    int ret;
 117    block_acct_start(blk_get_stats(s->blk), &s->acct,
 118                     ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
 119
 120    trace_cd_read_sector_sync(s->lba);
 121
 122    switch (s->cd_sector_size) {
 123    case 2048:
 124        ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS,
 125                        s->io_buffer, ATAPI_SECTOR_SIZE);
 126        break;
 127    case 2352:
 128        ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS,
 129                        s->io_buffer + 16, ATAPI_SECTOR_SIZE);
 130        if (ret >= 0) {
 131            cd_data_to_raw(s->io_buffer, s->lba);
 132        }
 133        break;
 134    default:
 135        block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
 136        return -EIO;
 137    }
 138
 139    if (ret < 0) {
 140        block_acct_failed(blk_get_stats(s->blk), &s->acct);
 141    } else {
 142        block_acct_done(blk_get_stats(s->blk), &s->acct);
 143        s->lba++;
 144        s->io_buffer_index = 0;
 145    }
 146
 147    return ret;
 148}
 149
 150static void cd_read_sector_cb(void *opaque, int ret)
 151{
 152    IDEState *s = opaque;
 153
 154    trace_cd_read_sector_cb(s->lba, ret);
 155
 156    if (ret < 0) {
 157        block_acct_failed(blk_get_stats(s->blk), &s->acct);
 158        ide_atapi_io_error(s, ret);
 159        return;
 160    }
 161
 162    block_acct_done(blk_get_stats(s->blk), &s->acct);
 163
 164    if (s->cd_sector_size == 2352) {
 165        cd_data_to_raw(s->io_buffer, s->lba);
 166    }
 167
 168    s->lba++;
 169    s->io_buffer_index = 0;
 170    s->status &= ~BUSY_STAT;
 171
 172    ide_atapi_cmd_reply_end(s);
 173}
 174
 175static int cd_read_sector(IDEState *s)
 176{
 177    if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) {
 178        block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
 179        return -EINVAL;
 180    }
 181
 182    s->iov.iov_base = (s->cd_sector_size == 2352) ?
 183                      s->io_buffer + 16 : s->io_buffer;
 184
 185    s->iov.iov_len = ATAPI_SECTOR_SIZE;
 186    qemu_iovec_init_external(&s->qiov, &s->iov, 1);
 187
 188    trace_cd_read_sector(s->lba);
 189
 190    block_acct_start(blk_get_stats(s->blk), &s->acct,
 191                     ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
 192
 193    ide_buffered_readv(s, (int64_t)s->lba << 2, &s->qiov, 4,
 194                       cd_read_sector_cb, s);
 195
 196    s->status |= BUSY_STAT;
 197    return 0;
 198}
 199
 200void ide_atapi_cmd_ok(IDEState *s)
 201{
 202    s->error = 0;
 203    s->status = READY_STAT | SEEK_STAT;
 204    s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
 205    ide_transfer_stop(s);
 206    ide_set_irq(s->bus);
 207}
 208
 209void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc)
 210{
 211    trace_ide_atapi_cmd_error(s, sense_key, asc);
 212    s->error = sense_key << 4;
 213    s->status = READY_STAT | ERR_STAT;
 214    s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
 215    s->sense_key = sense_key;
 216    s->asc = asc;
 217    ide_transfer_stop(s);
 218    ide_set_irq(s->bus);
 219}
 220
 221void ide_atapi_io_error(IDEState *s, int ret)
 222{
 223    /* XXX: handle more errors */
 224    if (ret == -ENOMEDIUM) {
 225        ide_atapi_cmd_error(s, NOT_READY,
 226                            ASC_MEDIUM_NOT_PRESENT);
 227    } else {
 228        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 229                            ASC_LOGICAL_BLOCK_OOR);
 230    }
 231}
 232
 233static uint16_t atapi_byte_count_limit(IDEState *s)
 234{
 235    uint16_t bcl;
 236
 237    bcl = s->lcyl | (s->hcyl << 8);
 238    if (bcl == 0xffff) {
 239        return 0xfffe;
 240    }
 241    return bcl;
 242}
 243
 244/* The whole ATAPI transfer logic is handled in this function */
 245void ide_atapi_cmd_reply_end(IDEState *s)
 246{
 247    int byte_count_limit, size, ret;
 248    trace_ide_atapi_cmd_reply_end(s, s->packet_transfer_size,
 249                                  s->elementary_transfer_size,
 250                                  s->io_buffer_index);
 251    if (s->packet_transfer_size <= 0) {
 252        /* end of transfer */
 253        ide_atapi_cmd_ok(s);
 254        ide_set_irq(s->bus);
 255        trace_ide_atapi_cmd_reply_end_eot(s, s->status);
 256    } else {
 257        /* see if a new sector must be read */
 258        if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) {
 259            if (!s->elementary_transfer_size) {
 260                ret = cd_read_sector(s);
 261                if (ret < 0) {
 262                    ide_atapi_io_error(s, ret);
 263                }
 264                return;
 265            } else {
 266                /* rebuffering within an elementary transfer is
 267                 * only possible with a sync request because we
 268                 * end up with a race condition otherwise */
 269                ret = cd_read_sector_sync(s);
 270                if (ret < 0) {
 271                    ide_atapi_io_error(s, ret);
 272                    return;
 273                }
 274            }
 275        }
 276        if (s->elementary_transfer_size > 0) {
 277            /* there are some data left to transmit in this elementary
 278               transfer */
 279            size = s->cd_sector_size - s->io_buffer_index;
 280            if (size > s->elementary_transfer_size)
 281                size = s->elementary_transfer_size;
 282            s->packet_transfer_size -= size;
 283            s->elementary_transfer_size -= size;
 284            s->io_buffer_index += size;
 285            ide_transfer_start(s, s->io_buffer + s->io_buffer_index - size,
 286                               size, ide_atapi_cmd_reply_end);
 287        } else {
 288            /* a new transfer is needed */
 289            s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO;
 290            byte_count_limit = atapi_byte_count_limit(s);
 291            trace_ide_atapi_cmd_reply_end_bcl(s, byte_count_limit);
 292            size = s->packet_transfer_size;
 293            if (size > byte_count_limit) {
 294                /* byte count limit must be even if this case */
 295                if (byte_count_limit & 1)
 296                    byte_count_limit--;
 297                size = byte_count_limit;
 298            }
 299            s->lcyl = size;
 300            s->hcyl = size >> 8;
 301            s->elementary_transfer_size = size;
 302            /* we cannot transmit more than one sector at a time */
 303            if (s->lba != -1) {
 304                if (size > (s->cd_sector_size - s->io_buffer_index))
 305                    size = (s->cd_sector_size - s->io_buffer_index);
 306            }
 307            s->packet_transfer_size -= size;
 308            s->elementary_transfer_size -= size;
 309            s->io_buffer_index += size;
 310            ide_transfer_start(s, s->io_buffer + s->io_buffer_index - size,
 311                               size, ide_atapi_cmd_reply_end);
 312            ide_set_irq(s->bus);
 313            trace_ide_atapi_cmd_reply_end_new(s, s->status);
 314        }
 315    }
 316}
 317
 318/* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */
 319static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size)
 320{
 321    if (size > max_size)
 322        size = max_size;
 323    s->lba = -1; /* no sector read */
 324    s->packet_transfer_size = size;
 325    s->io_buffer_size = size;    /* dma: send the reply data as one chunk */
 326    s->elementary_transfer_size = 0;
 327
 328    if (s->atapi_dma) {
 329        block_acct_start(blk_get_stats(s->blk), &s->acct, size,
 330                         BLOCK_ACCT_READ);
 331        s->status = READY_STAT | SEEK_STAT | DRQ_STAT;
 332        ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
 333    } else {
 334        s->status = READY_STAT | SEEK_STAT;
 335        s->io_buffer_index = 0;
 336        ide_atapi_cmd_reply_end(s);
 337    }
 338}
 339
 340/* start a CD-CDROM read command */
 341static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors,
 342                                   int sector_size)
 343{
 344    s->lba = lba;
 345    s->packet_transfer_size = nb_sectors * sector_size;
 346    s->elementary_transfer_size = 0;
 347    s->io_buffer_index = sector_size;
 348    s->cd_sector_size = sector_size;
 349
 350    ide_atapi_cmd_reply_end(s);
 351}
 352
 353static void ide_atapi_cmd_check_status(IDEState *s)
 354{
 355    trace_ide_atapi_cmd_check_status(s);
 356    s->error = MC_ERR | (UNIT_ATTENTION << 4);
 357    s->status = ERR_STAT;
 358    s->nsector = 0;
 359    ide_set_irq(s->bus);
 360}
 361/* ATAPI DMA support */
 362
 363static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret)
 364{
 365    IDEState *s = opaque;
 366    int data_offset, n;
 367
 368    if (ret < 0) {
 369        if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) {
 370            if (s->bus->error_status) {
 371                s->bus->dma->aiocb = NULL;
 372                return;
 373            }
 374            goto eot;
 375        }
 376    }
 377
 378    if (s->io_buffer_size > 0) {
 379        /*
 380         * For a cdrom read sector command (s->lba != -1),
 381         * adjust the lba for the next s->io_buffer_size chunk
 382         * and dma the current chunk.
 383         * For a command != read (s->lba == -1), just transfer
 384         * the reply data.
 385         */
 386        if (s->lba != -1) {
 387            if (s->cd_sector_size == 2352) {
 388                n = 1;
 389                cd_data_to_raw(s->io_buffer, s->lba);
 390            } else {
 391                n = s->io_buffer_size >> 11;
 392            }
 393            s->lba += n;
 394        }
 395        s->packet_transfer_size -= s->io_buffer_size;
 396        if (s->bus->dma->ops->rw_buf(s->bus->dma, 1) == 0)
 397            goto eot;
 398    }
 399
 400    if (s->packet_transfer_size <= 0) {
 401        s->status = READY_STAT | SEEK_STAT;
 402        s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
 403        ide_set_irq(s->bus);
 404        goto eot;
 405    }
 406
 407    s->io_buffer_index = 0;
 408    if (s->cd_sector_size == 2352) {
 409        n = 1;
 410        s->io_buffer_size = s->cd_sector_size;
 411        data_offset = 16;
 412    } else {
 413        n = s->packet_transfer_size >> 11;
 414        if (n > (IDE_DMA_BUF_SECTORS / 4))
 415            n = (IDE_DMA_BUF_SECTORS / 4);
 416        s->io_buffer_size = n * 2048;
 417        data_offset = 0;
 418    }
 419    trace_ide_atapi_cmd_read_dma_cb_aio(s, s->lba, n);
 420    s->bus->dma->iov.iov_base = (void *)(s->io_buffer + data_offset);
 421    s->bus->dma->iov.iov_len = n * ATAPI_SECTOR_SIZE;
 422    qemu_iovec_init_external(&s->bus->dma->qiov, &s->bus->dma->iov, 1);
 423
 424    s->bus->dma->aiocb = ide_buffered_readv(s, (int64_t)s->lba << 2,
 425                                            &s->bus->dma->qiov, n * 4,
 426                                            ide_atapi_cmd_read_dma_cb, s);
 427    return;
 428
 429eot:
 430    if (ret < 0) {
 431        block_acct_failed(blk_get_stats(s->blk), &s->acct);
 432    } else {
 433        block_acct_done(blk_get_stats(s->blk), &s->acct);
 434    }
 435    ide_set_inactive(s, false);
 436}
 437
 438/* start a CD-CDROM read command with DMA */
 439/* XXX: test if DMA is available */
 440static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors,
 441                                   int sector_size)
 442{
 443    s->lba = lba;
 444    s->packet_transfer_size = nb_sectors * sector_size;
 445    s->io_buffer_size = 0;
 446    s->cd_sector_size = sector_size;
 447
 448    block_acct_start(blk_get_stats(s->blk), &s->acct, s->packet_transfer_size,
 449                     BLOCK_ACCT_READ);
 450
 451    /* XXX: check if BUSY_STAT should be set */
 452    s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT;
 453    ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
 454}
 455
 456static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors,
 457                               int sector_size)
 458{
 459    trace_ide_atapi_cmd_read(s, s->atapi_dma ? "dma" : "pio",
 460                             lba, nb_sectors);
 461    if (s->atapi_dma) {
 462        ide_atapi_cmd_read_dma(s, lba, nb_sectors, sector_size);
 463    } else {
 464        ide_atapi_cmd_read_pio(s, lba, nb_sectors, sector_size);
 465    }
 466}
 467
 468void ide_atapi_dma_restart(IDEState *s)
 469{
 470    /*
 471     * At this point we can just re-evaluate the packet command and start over.
 472     * The presence of ->dma_cb callback in the pre_save ensures that the packet
 473     * command has been completely sent and we can safely restart command.
 474     */
 475    s->unit = s->bus->retry_unit;
 476    s->bus->dma->ops->restart_dma(s->bus->dma);
 477    ide_atapi_cmd(s);
 478}
 479
 480static inline uint8_t ide_atapi_set_profile(uint8_t *buf, uint8_t *index,
 481                                            uint16_t profile)
 482{
 483    uint8_t *buf_profile = buf + 12; /* start of profiles */
 484
 485    buf_profile += ((*index) * 4); /* start of indexed profile */
 486    cpu_to_ube16 (buf_profile, profile);
 487    buf_profile[2] = ((buf_profile[0] == buf[6]) && (buf_profile[1] == buf[7]));
 488
 489    /* each profile adds 4 bytes to the response */
 490    (*index)++;
 491    buf[11] += 4; /* Additional Length */
 492
 493    return 4;
 494}
 495
 496static int ide_dvd_read_structure(IDEState *s, int format,
 497                                  const uint8_t *packet, uint8_t *buf)
 498{
 499    switch (format) {
 500        case 0x0: /* Physical format information */
 501            {
 502                int layer = packet[6];
 503                uint64_t total_sectors;
 504
 505                if (layer != 0)
 506                    return -ASC_INV_FIELD_IN_CMD_PACKET;
 507
 508                total_sectors = s->nb_sectors >> 2;
 509                if (total_sectors == 0) {
 510                    return -ASC_MEDIUM_NOT_PRESENT;
 511                }
 512
 513                buf[4] = 1;   /* DVD-ROM, part version 1 */
 514                buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
 515                buf[6] = 1;   /* one layer, read-only (per MMC-2 spec) */
 516                buf[7] = 0;   /* default densities */
 517
 518                /* FIXME: 0x30000 per spec? */
 519                cpu_to_ube32(buf + 8, 0); /* start sector */
 520                cpu_to_ube32(buf + 12, total_sectors - 1); /* end sector */
 521                cpu_to_ube32(buf + 16, total_sectors - 1); /* l0 end sector */
 522
 523                /* Size of buffer, not including 2 byte size field */
 524                stw_be_p(buf, 2048 + 2);
 525
 526                /* 2k data + 4 byte header */
 527                return (2048 + 4);
 528            }
 529
 530        case 0x01: /* DVD copyright information */
 531            buf[4] = 0; /* no copyright data */
 532            buf[5] = 0; /* no region restrictions */
 533
 534            /* Size of buffer, not including 2 byte size field */
 535            stw_be_p(buf, 4 + 2);
 536
 537            /* 4 byte header + 4 byte data */
 538            return (4 + 4);
 539
 540        case 0x03: /* BCA information - invalid field for no BCA info */
 541            return -ASC_INV_FIELD_IN_CMD_PACKET;
 542
 543        case 0x04: /* DVD disc manufacturing information */
 544            /* Size of buffer, not including 2 byte size field */
 545            stw_be_p(buf, 2048 + 2);
 546
 547            /* 2k data + 4 byte header */
 548            return (2048 + 4);
 549
 550        case 0xff:
 551            /*
 552             * This lists all the command capabilities above.  Add new ones
 553             * in order and update the length and buffer return values.
 554             */
 555
 556            buf[4] = 0x00; /* Physical format */
 557            buf[5] = 0x40; /* Not writable, is readable */
 558            stw_be_p(buf + 6, 2048 + 4);
 559
 560            buf[8] = 0x01; /* Copyright info */
 561            buf[9] = 0x40; /* Not writable, is readable */
 562            stw_be_p(buf + 10, 4 + 4);
 563
 564            buf[12] = 0x03; /* BCA info */
 565            buf[13] = 0x40; /* Not writable, is readable */
 566            stw_be_p(buf + 14, 188 + 4);
 567
 568            buf[16] = 0x04; /* Manufacturing info */
 569            buf[17] = 0x40; /* Not writable, is readable */
 570            stw_be_p(buf + 18, 2048 + 4);
 571
 572            /* Size of buffer, not including 2 byte size field */
 573            stw_be_p(buf, 16 + 2);
 574
 575            /* data written + 4 byte header */
 576            return (16 + 4);
 577
 578        default: /* TODO: formats beyond DVD-ROM requires */
 579            return -ASC_INV_FIELD_IN_CMD_PACKET;
 580    }
 581}
 582
 583static unsigned int event_status_media(IDEState *s,
 584                                       uint8_t *buf)
 585{
 586    uint8_t event_code, media_status;
 587
 588    media_status = 0;
 589    if (s->tray_open) {
 590        media_status = MS_TRAY_OPEN;
 591    } else if (blk_is_inserted(s->blk)) {
 592        media_status = MS_MEDIA_PRESENT;
 593    }
 594
 595    /* Event notification descriptor */
 596    event_code = MEC_NO_CHANGE;
 597    if (media_status != MS_TRAY_OPEN) {
 598        if (s->events.new_media) {
 599            event_code = MEC_NEW_MEDIA;
 600            s->events.new_media = false;
 601        } else if (s->events.eject_request) {
 602            event_code = MEC_EJECT_REQUESTED;
 603            s->events.eject_request = false;
 604        }
 605    }
 606
 607    buf[4] = event_code;
 608    buf[5] = media_status;
 609
 610    /* These fields are reserved, just clear them. */
 611    buf[6] = 0;
 612    buf[7] = 0;
 613
 614    return 8; /* We wrote to 4 extra bytes from the header */
 615}
 616
 617/*
 618 * Before transferring data or otherwise signalling acceptance of a command
 619 * marked CONDDATA, we must check the validity of the byte_count_limit.
 620 */
 621static bool validate_bcl(IDEState *s)
 622{
 623    /* TODO: Check IDENTIFY data word 125 for defacult BCL (currently 0) */
 624    if (s->atapi_dma || atapi_byte_count_limit(s)) {
 625        return true;
 626    }
 627
 628    /* TODO: Move abort back into core.c and introduce proper error flow between
 629     *       ATAPI layer and IDE core layer */
 630    ide_abort_command(s);
 631    return false;
 632}
 633
 634static void cmd_get_event_status_notification(IDEState *s,
 635                                              uint8_t *buf)
 636{
 637    const uint8_t *packet = buf;
 638
 639    struct {
 640        uint8_t opcode;
 641        uint8_t polled;        /* lsb bit is polled; others are reserved */
 642        uint8_t reserved2[2];
 643        uint8_t class;
 644        uint8_t reserved3[2];
 645        uint16_t len;
 646        uint8_t control;
 647    } QEMU_PACKED *gesn_cdb;
 648
 649    struct {
 650        uint16_t len;
 651        uint8_t notification_class;
 652        uint8_t supported_events;
 653    } QEMU_PACKED *gesn_event_header;
 654    unsigned int max_len, used_len;
 655
 656    gesn_cdb = (void *)packet;
 657    gesn_event_header = (void *)buf;
 658
 659    max_len = be16_to_cpu(gesn_cdb->len);
 660
 661    /* It is fine by the MMC spec to not support async mode operations */
 662    if (!(gesn_cdb->polled & 0x01)) { /* asynchronous mode */
 663        /* Only polling is supported, asynchronous mode is not. */
 664        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 665                            ASC_INV_FIELD_IN_CMD_PACKET);
 666        return;
 667    }
 668
 669    /* polling mode operation */
 670
 671    /*
 672     * These are the supported events.
 673     *
 674     * We currently only support requests of the 'media' type.
 675     * Notification class requests and supported event classes are bitmasks,
 676     * but they are build from the same values as the "notification class"
 677     * field.
 678     */
 679    gesn_event_header->supported_events = 1 << GESN_MEDIA;
 680
 681    /*
 682     * We use |= below to set the class field; other bits in this byte
 683     * are reserved now but this is useful to do if we have to use the
 684     * reserved fields later.
 685     */
 686    gesn_event_header->notification_class = 0;
 687
 688    /*
 689     * Responses to requests are to be based on request priority.  The
 690     * notification_class_request_type enum above specifies the
 691     * priority: upper elements are higher prio than lower ones.
 692     */
 693    if (gesn_cdb->class & (1 << GESN_MEDIA)) {
 694        gesn_event_header->notification_class |= GESN_MEDIA;
 695        used_len = event_status_media(s, buf);
 696    } else {
 697        gesn_event_header->notification_class = 0x80; /* No event available */
 698        used_len = sizeof(*gesn_event_header);
 699    }
 700    gesn_event_header->len = cpu_to_be16(used_len
 701                                         - sizeof(*gesn_event_header));
 702    ide_atapi_cmd_reply(s, used_len, max_len);
 703}
 704
 705static void cmd_request_sense(IDEState *s, uint8_t *buf)
 706{
 707    int max_len = buf[4];
 708
 709    memset(buf, 0, 18);
 710    buf[0] = 0x70 | (1 << 7);
 711    buf[2] = s->sense_key;
 712    buf[7] = 10;
 713    buf[12] = s->asc;
 714
 715    if (s->sense_key == UNIT_ATTENTION) {
 716        s->sense_key = NO_SENSE;
 717    }
 718
 719    ide_atapi_cmd_reply(s, 18, max_len);
 720}
 721
 722static void cmd_inquiry(IDEState *s, uint8_t *buf)
 723{
 724    uint8_t page_code = buf[2];
 725    int max_len = buf[4];
 726
 727    unsigned idx = 0;
 728    unsigned size_idx;
 729    unsigned preamble_len;
 730
 731    /* If the EVPD (Enable Vital Product Data) bit is set in byte 1,
 732     * we are being asked for a specific page of info indicated by byte 2. */
 733    if (buf[1] & 0x01) {
 734        preamble_len = 4;
 735        size_idx = 3;
 736
 737        buf[idx++] = 0x05;      /* CD-ROM */
 738        buf[idx++] = page_code; /* Page Code */
 739        buf[idx++] = 0x00;      /* reserved */
 740        idx++;                  /* length (set later) */
 741
 742        switch (page_code) {
 743        case 0x00:
 744            /* Supported Pages: List of supported VPD responses. */
 745            buf[idx++] = 0x00; /* 0x00: Supported Pages, and: */
 746            buf[idx++] = 0x83; /* 0x83: Device Identification. */
 747            break;
 748
 749        case 0x83:
 750            /* Device Identification. Each entry is optional, but the entries
 751             * included here are modeled after libata's VPD responses.
 752             * If the response is given, at least one entry must be present. */
 753
 754            /* Entry 1: Serial */
 755            if (idx + 24 > max_len) {
 756                /* Not enough room for even the first entry: */
 757                /* 4 byte header + 20 byte string */
 758                ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 759                                    ASC_DATA_PHASE_ERROR);
 760                return;
 761            }
 762            buf[idx++] = 0x02; /* Ascii */
 763            buf[idx++] = 0x00; /* Vendor Specific */
 764            buf[idx++] = 0x00;
 765            buf[idx++] = 20;   /* Remaining length */
 766            padstr8(buf + idx, 20, s->drive_serial_str);
 767            idx += 20;
 768
 769            /* Entry 2: Drive Model and Serial */
 770            if (idx + 72 > max_len) {
 771                /* 4 (header) + 8 (vendor) + 60 (model & serial) */
 772                goto out;
 773            }
 774            buf[idx++] = 0x02; /* Ascii */
 775            buf[idx++] = 0x01; /* T10 Vendor */
 776            buf[idx++] = 0x00;
 777            buf[idx++] = 68;
 778            padstr8(buf + idx, 8, "ATA"); /* Generic T10 vendor */
 779            idx += 8;
 780            padstr8(buf + idx, 40, s->drive_model_str);
 781            idx += 40;
 782            padstr8(buf + idx, 20, s->drive_serial_str);
 783            idx += 20;
 784
 785            /* Entry 3: WWN */
 786            if (s->wwn && (idx + 12 <= max_len)) {
 787                /* 4 byte header + 8 byte wwn */
 788                buf[idx++] = 0x01; /* Binary */
 789                buf[idx++] = 0x03; /* NAA */
 790                buf[idx++] = 0x00;
 791                buf[idx++] = 0x08;
 792                stq_be_p(&buf[idx], s->wwn);
 793                idx += 8;
 794            }
 795            break;
 796
 797        default:
 798            /* SPC-3, revision 23 sec. 6.4 */
 799            ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 800                                ASC_INV_FIELD_IN_CMD_PACKET);
 801            return;
 802        }
 803    } else {
 804        preamble_len = 5;
 805        size_idx = 4;
 806
 807        buf[0] = 0x05; /* CD-ROM */
 808        buf[1] = 0x80; /* removable */
 809        buf[2] = 0x00; /* ISO */
 810        buf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */
 811        /* buf[size_idx] set below. */
 812        buf[5] = 0;    /* reserved */
 813        buf[6] = 0;    /* reserved */
 814        buf[7] = 0;    /* reserved */
 815        padstr8(buf + 8, 8, "QEMU");
 816        padstr8(buf + 16, 16, "QEMU DVD-ROM");
 817        padstr8(buf + 32, 4, s->version);
 818        idx = 36;
 819    }
 820
 821 out:
 822    buf[size_idx] = idx - preamble_len;
 823    ide_atapi_cmd_reply(s, idx, max_len);
 824}
 825
 826static void cmd_get_configuration(IDEState *s, uint8_t *buf)
 827{
 828    uint32_t len;
 829    uint8_t index = 0;
 830    int max_len;
 831
 832    /* only feature 0 is supported */
 833    if (buf[2] != 0 || buf[3] != 0) {
 834        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 835                            ASC_INV_FIELD_IN_CMD_PACKET);
 836        return;
 837    }
 838
 839    /* XXX: could result in alignment problems in some architectures */
 840    max_len = ube16_to_cpu(buf + 7);
 841
 842    /*
 843     * XXX: avoid overflow for io_buffer if max_len is bigger than
 844     *      the size of that buffer (dimensioned to max number of
 845     *      sectors to transfer at once)
 846     *
 847     *      Only a problem if the feature/profiles grow.
 848     */
 849    if (max_len > 512) {
 850        /* XXX: assume 1 sector */
 851        max_len = 512;
 852    }
 853
 854    memset(buf, 0, max_len);
 855    /*
 856     * the number of sectors from the media tells us which profile
 857     * to use as current.  0 means there is no media
 858     */
 859    if (media_is_dvd(s)) {
 860        cpu_to_ube16(buf + 6, MMC_PROFILE_DVD_ROM);
 861    } else if (media_is_cd(s)) {
 862        cpu_to_ube16(buf + 6, MMC_PROFILE_CD_ROM);
 863    }
 864
 865    buf[10] = 0x02 | 0x01; /* persistent and current */
 866    len = 12; /* headers: 8 + 4 */
 867    len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_DVD_ROM);
 868    len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_CD_ROM);
 869    cpu_to_ube32(buf, len - 4); /* data length */
 870
 871    ide_atapi_cmd_reply(s, len, max_len);
 872}
 873
 874static void cmd_mode_sense(IDEState *s, uint8_t *buf)
 875{
 876    int action, code;
 877    int max_len;
 878
 879    max_len = ube16_to_cpu(buf + 7);
 880    action = buf[2] >> 6;
 881    code = buf[2] & 0x3f;
 882
 883    switch(action) {
 884    case 0: /* current values */
 885        switch(code) {
 886        case MODE_PAGE_R_W_ERROR: /* error recovery */
 887            cpu_to_ube16(&buf[0], 16 - 2);
 888            buf[2] = 0x70;
 889            buf[3] = 0;
 890            buf[4] = 0;
 891            buf[5] = 0;
 892            buf[6] = 0;
 893            buf[7] = 0;
 894
 895            buf[8] = MODE_PAGE_R_W_ERROR;
 896            buf[9] = 16 - 10;
 897            buf[10] = 0x00;
 898            buf[11] = 0x05;
 899            buf[12] = 0x00;
 900            buf[13] = 0x00;
 901            buf[14] = 0x00;
 902            buf[15] = 0x00;
 903            ide_atapi_cmd_reply(s, 16, max_len);
 904            break;
 905        case MODE_PAGE_AUDIO_CTL:
 906            cpu_to_ube16(&buf[0], 24 - 2);
 907            buf[2] = 0x70;
 908            buf[3] = 0;
 909            buf[4] = 0;
 910            buf[5] = 0;
 911            buf[6] = 0;
 912            buf[7] = 0;
 913
 914            buf[8] = MODE_PAGE_AUDIO_CTL;
 915            buf[9] = 24 - 10;
 916            /* Fill with CDROM audio volume */
 917            buf[17] = 0;
 918            buf[19] = 0;
 919            buf[21] = 0;
 920            buf[23] = 0;
 921
 922            ide_atapi_cmd_reply(s, 24, max_len);
 923            break;
 924        case MODE_PAGE_CAPABILITIES:
 925            cpu_to_ube16(&buf[0], 30 - 2);
 926            buf[2] = 0x70;
 927            buf[3] = 0;
 928            buf[4] = 0;
 929            buf[5] = 0;
 930            buf[6] = 0;
 931            buf[7] = 0;
 932
 933            buf[8] = MODE_PAGE_CAPABILITIES;
 934            buf[9] = 30 - 10;
 935            buf[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */
 936            buf[11] = 0x00;
 937
 938            /* Claim PLAY_AUDIO capability (0x01) since some Linux
 939               code checks for this to automount media. */
 940            buf[12] = 0x71;
 941            buf[13] = 3 << 5;
 942            buf[14] = (1 << 0) | (1 << 3) | (1 << 5);
 943            if (s->tray_locked) {
 944                buf[14] |= 1 << 1;
 945            }
 946            buf[15] = 0x00; /* No volume & mute control, no changer */
 947            cpu_to_ube16(&buf[16], 704); /* 4x read speed */
 948            buf[18] = 0; /* Two volume levels */
 949            buf[19] = 2;
 950            cpu_to_ube16(&buf[20], 512); /* 512k buffer */
 951            cpu_to_ube16(&buf[22], 704); /* 4x read speed current */
 952            buf[24] = 0;
 953            buf[25] = 0;
 954            buf[26] = 0;
 955            buf[27] = 0;
 956            buf[28] = 0;
 957            buf[29] = 0;
 958            ide_atapi_cmd_reply(s, 30, max_len);
 959            break;
 960        default:
 961            goto error_cmd;
 962        }
 963        break;
 964    case 1: /* changeable values */
 965        goto error_cmd;
 966    case 2: /* default values */
 967        goto error_cmd;
 968    default:
 969    case 3: /* saved values */
 970        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 971                            ASC_SAVING_PARAMETERS_NOT_SUPPORTED);
 972        break;
 973    }
 974    return;
 975
 976error_cmd:
 977    ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET);
 978}
 979
 980static void cmd_test_unit_ready(IDEState *s, uint8_t *buf)
 981{
 982    /* Not Ready Conditions are already handled in ide_atapi_cmd(), so if we
 983     * come here, we know that it's ready. */
 984    ide_atapi_cmd_ok(s);
 985}
 986
 987static void cmd_prevent_allow_medium_removal(IDEState *s, uint8_t* buf)
 988{
 989    s->tray_locked = buf[4] & 1;
 990    blk_lock_medium(s->blk, buf[4] & 1);
 991    ide_atapi_cmd_ok(s);
 992}
 993
 994static void cmd_read(IDEState *s, uint8_t* buf)
 995{
 996    int nb_sectors, lba;
 997
 998    if (buf[0] == GPCMD_READ_10) {
 999        nb_sectors = ube16_to_cpu(buf + 7);
1000    } else {
1001        nb_sectors = ube32_to_cpu(buf + 6);
1002    }
1003
1004    lba = ube32_to_cpu(buf + 2);
1005    if (nb_sectors == 0) {
1006        ide_atapi_cmd_ok(s);
1007        return;
1008    }
1009
1010    ide_atapi_cmd_read(s, lba, nb_sectors, 2048);
1011}
1012
1013static void cmd_read_cd(IDEState *s, uint8_t* buf)
1014{
1015    int nb_sectors, lba, transfer_request;
1016
1017    nb_sectors = (buf[6] << 16) | (buf[7] << 8) | buf[8];
1018    lba = ube32_to_cpu(buf + 2);
1019
1020    if (nb_sectors == 0) {
1021        ide_atapi_cmd_ok(s);
1022        return;
1023    }
1024
1025    transfer_request = buf[9] & 0xf8;
1026    if (transfer_request == 0x00) {
1027        /* nothing */
1028        ide_atapi_cmd_ok(s);
1029        return;
1030    }
1031
1032    /* Check validity of BCL before transferring data */
1033    if (!validate_bcl(s)) {
1034        return;
1035    }
1036
1037    switch (transfer_request) {
1038    case 0x10:
1039        /* normal read */
1040        ide_atapi_cmd_read(s, lba, nb_sectors, 2048);
1041        break;
1042    case 0xf8:
1043        /* read all data */
1044        ide_atapi_cmd_read(s, lba, nb_sectors, 2352);
1045        break;
1046    default:
1047        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1048                            ASC_INV_FIELD_IN_CMD_PACKET);
1049        break;
1050    }
1051}
1052
1053static void cmd_seek(IDEState *s, uint8_t* buf)
1054{
1055    unsigned int lba;
1056    uint64_t total_sectors = s->nb_sectors >> 2;
1057
1058    lba = ube32_to_cpu(buf + 2);
1059    if (lba >= total_sectors) {
1060        ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
1061        return;
1062    }
1063
1064    ide_atapi_cmd_ok(s);
1065}
1066
1067static void cmd_start_stop_unit(IDEState *s, uint8_t* buf)
1068{
1069    int sense;
1070    bool start = buf[4] & 1;
1071    bool loej = buf[4] & 2;     /* load on start, eject on !start */
1072    int pwrcnd = buf[4] & 0xf0;
1073
1074    if (pwrcnd) {
1075        /* eject/load only happens for power condition == 0 */
1076        ide_atapi_cmd_ok(s);
1077        return;
1078    }
1079
1080    if (loej) {
1081        if (!start && !s->tray_open && s->tray_locked) {
1082            sense = blk_is_inserted(s->blk)
1083                ? NOT_READY : ILLEGAL_REQUEST;
1084            ide_atapi_cmd_error(s, sense, ASC_MEDIA_REMOVAL_PREVENTED);
1085            return;
1086        }
1087
1088        if (s->tray_open != !start) {
1089            blk_eject(s->blk, !start);
1090            s->tray_open = !start;
1091        }
1092    }
1093
1094    ide_atapi_cmd_ok(s);
1095}
1096
1097static void cmd_mechanism_status(IDEState *s, uint8_t* buf)
1098{
1099    int max_len = ube16_to_cpu(buf + 8);
1100
1101    cpu_to_ube16(buf, 0);
1102    /* no current LBA */
1103    buf[2] = 0;
1104    buf[3] = 0;
1105    buf[4] = 0;
1106    buf[5] = 1;
1107    cpu_to_ube16(buf + 6, 0);
1108    ide_atapi_cmd_reply(s, 8, max_len);
1109}
1110
1111static void cmd_read_toc_pma_atip(IDEState *s, uint8_t* buf)
1112{
1113    int format, msf, start_track, len;
1114    int max_len;
1115    uint64_t total_sectors = s->nb_sectors >> 2;
1116
1117    max_len = ube16_to_cpu(buf + 7);
1118    format = buf[9] >> 6;
1119    msf = (buf[1] >> 1) & 1;
1120    start_track = buf[6];
1121
1122    switch(format) {
1123    case 0:
1124        len = cdrom_read_toc(total_sectors, buf, msf, start_track);
1125        if (len < 0)
1126            goto error_cmd;
1127        ide_atapi_cmd_reply(s, len, max_len);
1128        break;
1129    case 1:
1130        /* multi session : only a single session defined */
1131        memset(buf, 0, 12);
1132        buf[1] = 0x0a;
1133        buf[2] = 0x01;
1134        buf[3] = 0x01;
1135        ide_atapi_cmd_reply(s, 12, max_len);
1136        break;
1137    case 2:
1138        len = cdrom_read_toc_raw(total_sectors, buf, msf, start_track);
1139        if (len < 0)
1140            goto error_cmd;
1141        ide_atapi_cmd_reply(s, len, max_len);
1142        break;
1143    default:
1144    error_cmd:
1145        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1146                            ASC_INV_FIELD_IN_CMD_PACKET);
1147    }
1148}
1149
1150static void cmd_read_cdvd_capacity(IDEState *s, uint8_t* buf)
1151{
1152    uint64_t total_sectors = s->nb_sectors >> 2;
1153
1154    /* NOTE: it is really the number of sectors minus 1 */
1155    cpu_to_ube32(buf, total_sectors - 1);
1156    cpu_to_ube32(buf + 4, 2048);
1157    ide_atapi_cmd_reply(s, 8, 8);
1158}
1159
1160static void cmd_read_disc_information(IDEState *s, uint8_t* buf)
1161{
1162    uint8_t type = buf[1] & 7;
1163    uint32_t max_len = ube16_to_cpu(buf + 7);
1164
1165    /* Types 1/2 are only defined for Blu-Ray.  */
1166    if (type != 0) {
1167        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1168                            ASC_INV_FIELD_IN_CMD_PACKET);
1169        return;
1170    }
1171
1172    memset(buf, 0, 34);
1173    buf[1] = 32;
1174    buf[2] = 0xe; /* last session complete, disc finalized */
1175    buf[3] = 1;   /* first track on disc */
1176    buf[4] = 1;   /* # of sessions */
1177    buf[5] = 1;   /* first track of last session */
1178    buf[6] = 1;   /* last track of last session */
1179    buf[7] = 0x20; /* unrestricted use */
1180    buf[8] = 0x00; /* CD-ROM or DVD-ROM */
1181    /* 9-10-11: most significant byte corresponding bytes 4-5-6 */
1182    /* 12-23: not meaningful for CD-ROM or DVD-ROM */
1183    /* 24-31: disc bar code */
1184    /* 32: disc application code */
1185    /* 33: number of OPC tables */
1186
1187    ide_atapi_cmd_reply(s, 34, max_len);
1188}
1189
1190static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf)
1191{
1192    int max_len;
1193    int media = buf[1];
1194    int format = buf[7];
1195    int ret;
1196
1197    max_len = ube16_to_cpu(buf + 8);
1198
1199    if (format < 0xff) {
1200        if (media_is_cd(s)) {
1201            ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1202                                ASC_INCOMPATIBLE_FORMAT);
1203            return;
1204        } else if (!media_present(s)) {
1205            ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1206                                ASC_INV_FIELD_IN_CMD_PACKET);
1207            return;
1208        }
1209    }
1210
1211    memset(buf, 0, max_len > IDE_DMA_BUF_SECTORS * 512 + 4 ?
1212           IDE_DMA_BUF_SECTORS * 512 + 4 : max_len);
1213
1214    switch (format) {
1215        case 0x00 ... 0x7f:
1216        case 0xff:
1217            if (media == 0) {
1218                ret = ide_dvd_read_structure(s, format, buf, buf);
1219
1220                if (ret < 0) {
1221                    ide_atapi_cmd_error(s, ILLEGAL_REQUEST, -ret);
1222                } else {
1223                    ide_atapi_cmd_reply(s, ret, max_len);
1224                }
1225
1226                break;
1227            }
1228            /* TODO: BD support, fall through for now */
1229
1230        /* Generic disk structures */
1231        case 0x80: /* TODO: AACS volume identifier */
1232        case 0x81: /* TODO: AACS media serial number */
1233        case 0x82: /* TODO: AACS media identifier */
1234        case 0x83: /* TODO: AACS media key block */
1235        case 0x90: /* TODO: List of recognized format layers */
1236        case 0xc0: /* TODO: Write protection status */
1237        default:
1238            ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1239                                ASC_INV_FIELD_IN_CMD_PACKET);
1240            break;
1241    }
1242}
1243
1244static void cmd_set_speed(IDEState *s, uint8_t* buf)
1245{
1246    ide_atapi_cmd_ok(s);
1247}
1248
1249enum {
1250    /*
1251     * Only commands flagged as ALLOW_UA are allowed to run under a
1252     * unit attention condition. (See MMC-5, section 4.1.6.1)
1253     */
1254    ALLOW_UA = 0x01,
1255
1256    /*
1257     * Commands flagged with CHECK_READY can only execute if a medium is present.
1258     * Otherwise they report the Not Ready Condition. (See MMC-5, section
1259     * 4.1.8)
1260     */
1261    CHECK_READY = 0x02,
1262
1263    /*
1264     * Commands flagged with NONDATA do not in any circumstances return
1265     * any data via ide_atapi_cmd_reply. These commands are exempt from
1266     * the normal byte_count_limit constraints.
1267     * See ATA8-ACS3 "7.21.5 Byte Count Limit"
1268     */
1269    NONDATA = 0x04,
1270
1271    /*
1272     * CONDDATA implies a command that transfers data only conditionally based
1273     * on the presence of suboptions. It should be exempt from the BCL check at
1274     * command validation time, but it needs to be checked at the command
1275     * handler level instead.
1276     */
1277    CONDDATA = 0x08,
1278};
1279
1280static const struct AtapiCmd {
1281    void (*handler)(IDEState *s, uint8_t *buf);
1282    int flags;
1283} atapi_cmd_table[0x100] = {
1284    [ 0x00 ] = { cmd_test_unit_ready,               CHECK_READY | NONDATA },
1285    [ 0x03 ] = { cmd_request_sense,                 ALLOW_UA },
1286    [ 0x12 ] = { cmd_inquiry,                       ALLOW_UA },
1287    [ 0x1b ] = { cmd_start_stop_unit,               NONDATA }, /* [1] */
1288    [ 0x1e ] = { cmd_prevent_allow_medium_removal,  NONDATA },
1289    [ 0x25 ] = { cmd_read_cdvd_capacity,            CHECK_READY },
1290    [ 0x28 ] = { cmd_read, /* (10) */               CHECK_READY },
1291    [ 0x2b ] = { cmd_seek,                          CHECK_READY | NONDATA },
1292    [ 0x43 ] = { cmd_read_toc_pma_atip,             CHECK_READY },
1293    [ 0x46 ] = { cmd_get_configuration,             ALLOW_UA },
1294    [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA },
1295    [ 0x51 ] = { cmd_read_disc_information,         CHECK_READY },
1296    [ 0x5a ] = { cmd_mode_sense, /* (10) */         0 },
1297    [ 0xa8 ] = { cmd_read, /* (12) */               CHECK_READY },
1298    [ 0xad ] = { cmd_read_dvd_structure,            CHECK_READY },
1299    [ 0xbb ] = { cmd_set_speed,                     NONDATA },
1300    [ 0xbd ] = { cmd_mechanism_status,              0 },
1301    [ 0xbe ] = { cmd_read_cd,                       CHECK_READY | CONDDATA },
1302    /* [1] handler detects and reports not ready condition itself */
1303};
1304
1305void ide_atapi_cmd(IDEState *s)
1306{
1307    uint8_t *buf = s->io_buffer;
1308    const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]];
1309
1310    trace_ide_atapi_cmd(s, s->io_buffer[0]);
1311
1312    if (trace_event_get_state_backends(TRACE_IDE_ATAPI_CMD_PACKET)) {
1313        /* Each pretty-printed byte needs two bytes and a space; */
1314        char *ppacket = g_malloc(ATAPI_PACKET_SIZE * 3 + 1);
1315        int i;
1316        for (i = 0; i < ATAPI_PACKET_SIZE; i++) {
1317            sprintf(ppacket + (i * 3), "%02x ", buf[i]);
1318        }
1319        trace_ide_atapi_cmd_packet(s, s->lcyl | (s->hcyl << 8), ppacket);
1320        g_free(ppacket);
1321    }
1322
1323    /*
1324     * If there's a UNIT_ATTENTION condition pending, only command flagged with
1325     * ALLOW_UA are allowed to complete. with other commands getting a CHECK
1326     * condition response unless a higher priority status, defined by the drive
1327     * here, is pending.
1328     */
1329    if (s->sense_key == UNIT_ATTENTION && !(cmd->flags & ALLOW_UA)) {
1330        ide_atapi_cmd_check_status(s);
1331        return;
1332    }
1333    /*
1334     * When a CD gets changed, we have to report an ejected state and
1335     * then a loaded state to guests so that they detect tray
1336     * open/close and media change events.  Guests that do not use
1337     * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
1338     * states rely on this behavior.
1339     */
1340    if (!(cmd->flags & ALLOW_UA) &&
1341        !s->tray_open && blk_is_inserted(s->blk) && s->cdrom_changed) {
1342
1343        if (s->cdrom_changed == 1) {
1344            ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
1345            s->cdrom_changed = 2;
1346        } else {
1347            ide_atapi_cmd_error(s, UNIT_ATTENTION, ASC_MEDIUM_MAY_HAVE_CHANGED);
1348            s->cdrom_changed = 0;
1349        }
1350
1351        return;
1352    }
1353
1354    /* Report a Not Ready condition if appropriate for the command */
1355    if ((cmd->flags & CHECK_READY) &&
1356        (!media_present(s) || !blk_is_inserted(s->blk)))
1357    {
1358        ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
1359        return;
1360    }
1361
1362    /* Commands that don't transfer DATA permit the byte_count_limit to be 0.
1363     * If this is a data-transferring PIO command and BCL is 0,
1364     * we abort at the /ATA/ level, not the ATAPI level.
1365     * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */
1366    if (cmd->handler && !(cmd->flags & (NONDATA | CONDDATA))) {
1367        if (!validate_bcl(s)) {
1368            return;
1369        }
1370    }
1371
1372    /* Execute the command */
1373    if (cmd->handler) {
1374        cmd->handler(s, buf);
1375        return;
1376    }
1377
1378    ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_ILLEGAL_OPCODE);
1379}
1380