qemu/hw/dma/rc4030.c
<<
>>
Prefs
   1/*
   2 * QEMU JAZZ RC4030 chipset
   3 *
   4 * Copyright (c) 2007-2009 Herve Poussineau
   5 *
   6 * Permission is hereby granted, free of charge, to any person obtaining a copy
   7 * of this software and associated documentation files (the "Software"), to deal
   8 * in the Software without restriction, including without limitation the rights
   9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10 * copies of the Software, and to permit persons to whom the Software is
  11 * furnished to do so, subject to the following conditions:
  12 *
  13 * The above copyright notice and this permission notice shall be included in
  14 * all copies or substantial portions of the Software.
  15 *
  16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22 * THE SOFTWARE.
  23 */
  24
  25#include "hw/hw.h"
  26#include "hw/mips/mips.h"
  27#include "qemu/timer.h"
  28
  29/********************************************************/
  30/* debug rc4030 */
  31
  32//#define DEBUG_RC4030
  33//#define DEBUG_RC4030_DMA
  34
  35#ifdef DEBUG_RC4030
  36#define DPRINTF(fmt, ...) \
  37do { printf("rc4030: " fmt , ## __VA_ARGS__); } while (0)
  38static const char* irq_names[] = { "parallel", "floppy", "sound", "video",
  39            "network", "scsi", "keyboard", "mouse", "serial0", "serial1" };
  40#else
  41#define DPRINTF(fmt, ...)
  42#endif
  43
  44#define RC4030_ERROR(fmt, ...) \
  45do { fprintf(stderr, "rc4030 ERROR: %s: " fmt, __func__ , ## __VA_ARGS__); } while (0)
  46
  47/********************************************************/
  48/* rc4030 emulation                                     */
  49
  50typedef struct dma_pagetable_entry {
  51    int32_t frame;
  52    int32_t owner;
  53} QEMU_PACKED dma_pagetable_entry;
  54
  55#define DMA_PAGESIZE    4096
  56#define DMA_REG_ENABLE  1
  57#define DMA_REG_COUNT   2
  58#define DMA_REG_ADDRESS 3
  59
  60#define DMA_FLAG_ENABLE     0x0001
  61#define DMA_FLAG_MEM_TO_DEV 0x0002
  62#define DMA_FLAG_TC_INTR    0x0100
  63#define DMA_FLAG_MEM_INTR   0x0200
  64#define DMA_FLAG_ADDR_INTR  0x0400
  65
  66typedef struct rc4030State
  67{
  68    uint32_t config; /* 0x0000: RC4030 config register */
  69    uint32_t revision; /* 0x0008: RC4030 Revision register */
  70    uint32_t invalid_address_register; /* 0x0010: Invalid Address register */
  71
  72    /* DMA */
  73    uint32_t dma_regs[8][4];
  74    uint32_t dma_tl_base; /* 0x0018: DMA transl. table base */
  75    uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */
  76
  77    /* cache */
  78    uint32_t cache_maint; /* 0x0030: Cache Maintenance */
  79    uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */
  80    uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */
  81    uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */
  82    uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */
  83    uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */
  84
  85    uint32_t nmi_interrupt; /* 0x0200: interrupt source */
  86    uint32_t offset210;
  87    uint32_t nvram_protect; /* 0x0220: NV ram protect register */
  88    uint32_t rem_speed[16];
  89    uint32_t imr_jazz; /* Local bus int enable mask */
  90    uint32_t isr_jazz; /* Local bus int source */
  91
  92    /* timer */
  93    QEMUTimer *periodic_timer;
  94    uint32_t itr; /* Interval timer reload */
  95
  96    qemu_irq timer_irq;
  97    qemu_irq jazz_bus_irq;
  98
  99    MemoryRegion iomem_chipset;
 100    MemoryRegion iomem_jazzio;
 101} rc4030State;
 102
 103static void set_next_tick(rc4030State *s)
 104{
 105    qemu_irq_lower(s->timer_irq);
 106    uint32_t tm_hz;
 107
 108    tm_hz = 1000 / (s->itr + 1);
 109
 110    timer_mod(s->periodic_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
 111                   get_ticks_per_sec() / tm_hz);
 112}
 113
 114/* called for accesses to rc4030 */
 115static uint32_t rc4030_readl(void *opaque, hwaddr addr)
 116{
 117    rc4030State *s = opaque;
 118    uint32_t val;
 119
 120    addr &= 0x3fff;
 121    switch (addr & ~0x3) {
 122    /* Global config register */
 123    case 0x0000:
 124        val = s->config;
 125        break;
 126    /* Revision register */
 127    case 0x0008:
 128        val = s->revision;
 129        break;
 130    /* Invalid Address register */
 131    case 0x0010:
 132        val = s->invalid_address_register;
 133        break;
 134    /* DMA transl. table base */
 135    case 0x0018:
 136        val = s->dma_tl_base;
 137        break;
 138    /* DMA transl. table limit */
 139    case 0x0020:
 140        val = s->dma_tl_limit;
 141        break;
 142    /* Remote Failed Address */
 143    case 0x0038:
 144        val = s->remote_failed_address;
 145        break;
 146    /* Memory Failed Address */
 147    case 0x0040:
 148        val = s->memory_failed_address;
 149        break;
 150    /* I/O Cache Byte Mask */
 151    case 0x0058:
 152        val = s->cache_bmask;
 153        /* HACK */
 154        if (s->cache_bmask == (uint32_t)-1)
 155            s->cache_bmask = 0;
 156        break;
 157    /* Remote Speed Registers */
 158    case 0x0070:
 159    case 0x0078:
 160    case 0x0080:
 161    case 0x0088:
 162    case 0x0090:
 163    case 0x0098:
 164    case 0x00a0:
 165    case 0x00a8:
 166    case 0x00b0:
 167    case 0x00b8:
 168    case 0x00c0:
 169    case 0x00c8:
 170    case 0x00d0:
 171    case 0x00d8:
 172    case 0x00e0:
 173    case 0x00e8:
 174        val = s->rem_speed[(addr - 0x0070) >> 3];
 175        break;
 176    /* DMA channel base address */
 177    case 0x0100:
 178    case 0x0108:
 179    case 0x0110:
 180    case 0x0118:
 181    case 0x0120:
 182    case 0x0128:
 183    case 0x0130:
 184    case 0x0138:
 185    case 0x0140:
 186    case 0x0148:
 187    case 0x0150:
 188    case 0x0158:
 189    case 0x0160:
 190    case 0x0168:
 191    case 0x0170:
 192    case 0x0178:
 193    case 0x0180:
 194    case 0x0188:
 195    case 0x0190:
 196    case 0x0198:
 197    case 0x01a0:
 198    case 0x01a8:
 199    case 0x01b0:
 200    case 0x01b8:
 201    case 0x01c0:
 202    case 0x01c8:
 203    case 0x01d0:
 204    case 0x01d8:
 205    case 0x01e0:
 206    case 0x01e8:
 207    case 0x01f0:
 208    case 0x01f8:
 209        {
 210            int entry = (addr - 0x0100) >> 5;
 211            int idx = (addr & 0x1f) >> 3;
 212            val = s->dma_regs[entry][idx];
 213        }
 214        break;
 215    /* Interrupt source */
 216    case 0x0200:
 217        val = s->nmi_interrupt;
 218        break;
 219    /* Error type */
 220    case 0x0208:
 221        val = 0;
 222        break;
 223    /* Offset 0x0210 */
 224    case 0x0210:
 225        val = s->offset210;
 226        break;
 227    /* NV ram protect register */
 228    case 0x0220:
 229        val = s->nvram_protect;
 230        break;
 231    /* Interval timer count */
 232    case 0x0230:
 233        val = 0;
 234        qemu_irq_lower(s->timer_irq);
 235        break;
 236    /* EISA interrupt */
 237    case 0x0238:
 238        val = 7; /* FIXME: should be read from EISA controller */
 239        break;
 240    default:
 241        RC4030_ERROR("invalid read [" TARGET_FMT_plx "]\n", addr);
 242        val = 0;
 243        break;
 244    }
 245
 246    if ((addr & ~3) != 0x230) {
 247        DPRINTF("read 0x%02x at " TARGET_FMT_plx "\n", val, addr);
 248    }
 249
 250    return val;
 251}
 252
 253static uint32_t rc4030_readw(void *opaque, hwaddr addr)
 254{
 255    uint32_t v = rc4030_readl(opaque, addr & ~0x3);
 256    if (addr & 0x2)
 257        return v >> 16;
 258    else
 259        return v & 0xffff;
 260}
 261
 262static uint32_t rc4030_readb(void *opaque, hwaddr addr)
 263{
 264    uint32_t v = rc4030_readl(opaque, addr & ~0x3);
 265    return (v >> (8 * (addr & 0x3))) & 0xff;
 266}
 267
 268static void rc4030_writel(void *opaque, hwaddr addr, uint32_t val)
 269{
 270    rc4030State *s = opaque;
 271    addr &= 0x3fff;
 272
 273    DPRINTF("write 0x%02x at " TARGET_FMT_plx "\n", val, addr);
 274
 275    switch (addr & ~0x3) {
 276    /* Global config register */
 277    case 0x0000:
 278        s->config = val;
 279        break;
 280    /* DMA transl. table base */
 281    case 0x0018:
 282        s->dma_tl_base = val;
 283        break;
 284    /* DMA transl. table limit */
 285    case 0x0020:
 286        s->dma_tl_limit = val;
 287        break;
 288    /* DMA transl. table invalidated */
 289    case 0x0028:
 290        break;
 291    /* Cache Maintenance */
 292    case 0x0030:
 293        s->cache_maint = val;
 294        break;
 295    /* I/O Cache Physical Tag */
 296    case 0x0048:
 297        s->cache_ptag = val;
 298        break;
 299    /* I/O Cache Logical Tag */
 300    case 0x0050:
 301        s->cache_ltag = val;
 302        break;
 303    /* I/O Cache Byte Mask */
 304    case 0x0058:
 305        s->cache_bmask |= val; /* HACK */
 306        break;
 307    /* I/O Cache Buffer Window */
 308    case 0x0060:
 309        /* HACK */
 310        if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) {
 311            hwaddr dest = s->cache_ptag & ~0x1;
 312            dest += (s->cache_maint & 0x3) << 3;
 313            cpu_physical_memory_write(dest, &val, 4);
 314        }
 315        break;
 316    /* Remote Speed Registers */
 317    case 0x0070:
 318    case 0x0078:
 319    case 0x0080:
 320    case 0x0088:
 321    case 0x0090:
 322    case 0x0098:
 323    case 0x00a0:
 324    case 0x00a8:
 325    case 0x00b0:
 326    case 0x00b8:
 327    case 0x00c0:
 328    case 0x00c8:
 329    case 0x00d0:
 330    case 0x00d8:
 331    case 0x00e0:
 332    case 0x00e8:
 333        s->rem_speed[(addr - 0x0070) >> 3] = val;
 334        break;
 335    /* DMA channel base address */
 336    case 0x0100:
 337    case 0x0108:
 338    case 0x0110:
 339    case 0x0118:
 340    case 0x0120:
 341    case 0x0128:
 342    case 0x0130:
 343    case 0x0138:
 344    case 0x0140:
 345    case 0x0148:
 346    case 0x0150:
 347    case 0x0158:
 348    case 0x0160:
 349    case 0x0168:
 350    case 0x0170:
 351    case 0x0178:
 352    case 0x0180:
 353    case 0x0188:
 354    case 0x0190:
 355    case 0x0198:
 356    case 0x01a0:
 357    case 0x01a8:
 358    case 0x01b0:
 359    case 0x01b8:
 360    case 0x01c0:
 361    case 0x01c8:
 362    case 0x01d0:
 363    case 0x01d8:
 364    case 0x01e0:
 365    case 0x01e8:
 366    case 0x01f0:
 367    case 0x01f8:
 368        {
 369            int entry = (addr - 0x0100) >> 5;
 370            int idx = (addr & 0x1f) >> 3;
 371            s->dma_regs[entry][idx] = val;
 372        }
 373        break;
 374    /* Offset 0x0210 */
 375    case 0x0210:
 376        s->offset210 = val;
 377        break;
 378    /* Interval timer reload */
 379    case 0x0228:
 380        s->itr = val;
 381        qemu_irq_lower(s->timer_irq);
 382        set_next_tick(s);
 383        break;
 384    /* EISA interrupt */
 385    case 0x0238:
 386        break;
 387    default:
 388        RC4030_ERROR("invalid write of 0x%02x at [" TARGET_FMT_plx "]\n", val, addr);
 389        break;
 390    }
 391}
 392
 393static void rc4030_writew(void *opaque, hwaddr addr, uint32_t val)
 394{
 395    uint32_t old_val = rc4030_readl(opaque, addr & ~0x3);
 396
 397    if (addr & 0x2)
 398        val = (val << 16) | (old_val & 0x0000ffff);
 399    else
 400        val = val | (old_val & 0xffff0000);
 401    rc4030_writel(opaque, addr & ~0x3, val);
 402}
 403
 404static void rc4030_writeb(void *opaque, hwaddr addr, uint32_t val)
 405{
 406    uint32_t old_val = rc4030_readl(opaque, addr & ~0x3);
 407
 408    switch (addr & 3) {
 409    case 0:
 410        val = val | (old_val & 0xffffff00);
 411        break;
 412    case 1:
 413        val = (val << 8) | (old_val & 0xffff00ff);
 414        break;
 415    case 2:
 416        val = (val << 16) | (old_val & 0xff00ffff);
 417        break;
 418    case 3:
 419        val = (val << 24) | (old_val & 0x00ffffff);
 420        break;
 421    }
 422    rc4030_writel(opaque, addr & ~0x3, val);
 423}
 424
 425static const MemoryRegionOps rc4030_ops = {
 426    .old_mmio = {
 427        .read = { rc4030_readb, rc4030_readw, rc4030_readl, },
 428        .write = { rc4030_writeb, rc4030_writew, rc4030_writel, },
 429    },
 430    .endianness = DEVICE_NATIVE_ENDIAN,
 431};
 432
 433static void update_jazz_irq(rc4030State *s)
 434{
 435    uint16_t pending;
 436
 437    pending = s->isr_jazz & s->imr_jazz;
 438
 439#ifdef DEBUG_RC4030
 440    if (s->isr_jazz != 0) {
 441        uint32_t irq = 0;
 442        DPRINTF("pending irqs:");
 443        for (irq = 0; irq < ARRAY_SIZE(irq_names); irq++) {
 444            if (s->isr_jazz & (1 << irq)) {
 445                printf(" %s", irq_names[irq]);
 446                if (!(s->imr_jazz & (1 << irq))) {
 447                    printf("(ignored)");
 448                }
 449            }
 450        }
 451        printf("\n");
 452    }
 453#endif
 454
 455    if (pending != 0)
 456        qemu_irq_raise(s->jazz_bus_irq);
 457    else
 458        qemu_irq_lower(s->jazz_bus_irq);
 459}
 460
 461static void rc4030_irq_jazz_request(void *opaque, int irq, int level)
 462{
 463    rc4030State *s = opaque;
 464
 465    if (level) {
 466        s->isr_jazz |= 1 << irq;
 467    } else {
 468        s->isr_jazz &= ~(1 << irq);
 469    }
 470
 471    update_jazz_irq(s);
 472}
 473
 474static void rc4030_periodic_timer(void *opaque)
 475{
 476    rc4030State *s = opaque;
 477
 478    set_next_tick(s);
 479    qemu_irq_raise(s->timer_irq);
 480}
 481
 482static uint32_t jazzio_readw(void *opaque, hwaddr addr)
 483{
 484    rc4030State *s = opaque;
 485    uint32_t val;
 486    uint32_t irq;
 487    addr &= 0xfff;
 488
 489    switch (addr) {
 490    /* Local bus int source */
 491    case 0x00: {
 492        uint32_t pending = s->isr_jazz & s->imr_jazz;
 493        val = 0;
 494        irq = 0;
 495        while (pending) {
 496            if (pending & 1) {
 497                DPRINTF("returning irq %s\n", irq_names[irq]);
 498                val = (irq + 1) << 2;
 499                break;
 500            }
 501            irq++;
 502            pending >>= 1;
 503        }
 504        break;
 505    }
 506    /* Local bus int enable mask */
 507    case 0x02:
 508        val = s->imr_jazz;
 509        break;
 510    default:
 511        RC4030_ERROR("(jazz io controller) invalid read [" TARGET_FMT_plx "]\n", addr);
 512        val = 0;
 513    }
 514
 515    DPRINTF("(jazz io controller) read 0x%04x at " TARGET_FMT_plx "\n", val, addr);
 516
 517    return val;
 518}
 519
 520static uint32_t jazzio_readb(void *opaque, hwaddr addr)
 521{
 522    uint32_t v;
 523    v = jazzio_readw(opaque, addr & ~0x1);
 524    return (v >> (8 * (addr & 0x1))) & 0xff;
 525}
 526
 527static uint32_t jazzio_readl(void *opaque, hwaddr addr)
 528{
 529    uint32_t v;
 530    v = jazzio_readw(opaque, addr);
 531    v |= jazzio_readw(opaque, addr + 2) << 16;
 532    return v;
 533}
 534
 535static void jazzio_writew(void *opaque, hwaddr addr, uint32_t val)
 536{
 537    rc4030State *s = opaque;
 538    addr &= 0xfff;
 539
 540    DPRINTF("(jazz io controller) write 0x%04x at " TARGET_FMT_plx "\n", val, addr);
 541
 542    switch (addr) {
 543    /* Local bus int enable mask */
 544    case 0x02:
 545        s->imr_jazz = val;
 546        update_jazz_irq(s);
 547        break;
 548    default:
 549        RC4030_ERROR("(jazz io controller) invalid write of 0x%04x at [" TARGET_FMT_plx "]\n", val, addr);
 550        break;
 551    }
 552}
 553
 554static void jazzio_writeb(void *opaque, hwaddr addr, uint32_t val)
 555{
 556    uint32_t old_val = jazzio_readw(opaque, addr & ~0x1);
 557
 558    switch (addr & 1) {
 559    case 0:
 560        val = val | (old_val & 0xff00);
 561        break;
 562    case 1:
 563        val = (val << 8) | (old_val & 0x00ff);
 564        break;
 565    }
 566    jazzio_writew(opaque, addr & ~0x1, val);
 567}
 568
 569static void jazzio_writel(void *opaque, hwaddr addr, uint32_t val)
 570{
 571    jazzio_writew(opaque, addr, val & 0xffff);
 572    jazzio_writew(opaque, addr + 2, (val >> 16) & 0xffff);
 573}
 574
 575static const MemoryRegionOps jazzio_ops = {
 576    .old_mmio = {
 577        .read = { jazzio_readb, jazzio_readw, jazzio_readl, },
 578        .write = { jazzio_writeb, jazzio_writew, jazzio_writel, },
 579    },
 580    .endianness = DEVICE_NATIVE_ENDIAN,
 581};
 582
 583static void rc4030_reset(void *opaque)
 584{
 585    rc4030State *s = opaque;
 586    int i;
 587
 588    s->config = 0x410; /* some boards seem to accept 0x104 too */
 589    s->revision = 1;
 590    s->invalid_address_register = 0;
 591
 592    memset(s->dma_regs, 0, sizeof(s->dma_regs));
 593    s->dma_tl_base = s->dma_tl_limit = 0;
 594
 595    s->remote_failed_address = s->memory_failed_address = 0;
 596    s->cache_maint = 0;
 597    s->cache_ptag = s->cache_ltag = 0;
 598    s->cache_bmask = 0;
 599
 600    s->offset210 = 0x18186;
 601    s->nvram_protect = 7;
 602    for (i = 0; i < 15; i++)
 603        s->rem_speed[i] = 7;
 604    s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */
 605    s->isr_jazz = 0;
 606
 607    s->itr = 0;
 608
 609    qemu_irq_lower(s->timer_irq);
 610    qemu_irq_lower(s->jazz_bus_irq);
 611}
 612
 613static int rc4030_load(QEMUFile *f, void *opaque, int version_id)
 614{
 615    rc4030State* s = opaque;
 616    int i, j;
 617
 618    if (version_id != 2)
 619        return -EINVAL;
 620
 621    s->config = qemu_get_be32(f);
 622    s->invalid_address_register = qemu_get_be32(f);
 623    for (i = 0; i < 8; i++)
 624        for (j = 0; j < 4; j++)
 625            s->dma_regs[i][j] = qemu_get_be32(f);
 626    s->dma_tl_base = qemu_get_be32(f);
 627    s->dma_tl_limit = qemu_get_be32(f);
 628    s->cache_maint = qemu_get_be32(f);
 629    s->remote_failed_address = qemu_get_be32(f);
 630    s->memory_failed_address = qemu_get_be32(f);
 631    s->cache_ptag = qemu_get_be32(f);
 632    s->cache_ltag = qemu_get_be32(f);
 633    s->cache_bmask = qemu_get_be32(f);
 634    s->offset210 = qemu_get_be32(f);
 635    s->nvram_protect = qemu_get_be32(f);
 636    for (i = 0; i < 15; i++)
 637        s->rem_speed[i] = qemu_get_be32(f);
 638    s->imr_jazz = qemu_get_be32(f);
 639    s->isr_jazz = qemu_get_be32(f);
 640    s->itr = qemu_get_be32(f);
 641
 642    set_next_tick(s);
 643    update_jazz_irq(s);
 644
 645    return 0;
 646}
 647
 648static void rc4030_save(QEMUFile *f, void *opaque)
 649{
 650    rc4030State* s = opaque;
 651    int i, j;
 652
 653    qemu_put_be32(f, s->config);
 654    qemu_put_be32(f, s->invalid_address_register);
 655    for (i = 0; i < 8; i++)
 656        for (j = 0; j < 4; j++)
 657            qemu_put_be32(f, s->dma_regs[i][j]);
 658    qemu_put_be32(f, s->dma_tl_base);
 659    qemu_put_be32(f, s->dma_tl_limit);
 660    qemu_put_be32(f, s->cache_maint);
 661    qemu_put_be32(f, s->remote_failed_address);
 662    qemu_put_be32(f, s->memory_failed_address);
 663    qemu_put_be32(f, s->cache_ptag);
 664    qemu_put_be32(f, s->cache_ltag);
 665    qemu_put_be32(f, s->cache_bmask);
 666    qemu_put_be32(f, s->offset210);
 667    qemu_put_be32(f, s->nvram_protect);
 668    for (i = 0; i < 15; i++)
 669        qemu_put_be32(f, s->rem_speed[i]);
 670    qemu_put_be32(f, s->imr_jazz);
 671    qemu_put_be32(f, s->isr_jazz);
 672    qemu_put_be32(f, s->itr);
 673}
 674
 675void rc4030_dma_memory_rw(void *opaque, hwaddr addr, uint8_t *buf, int len, int is_write)
 676{
 677    rc4030State *s = opaque;
 678    hwaddr entry_addr;
 679    hwaddr phys_addr;
 680    dma_pagetable_entry entry;
 681    int index;
 682    int ncpy, i;
 683
 684    i = 0;
 685    for (;;) {
 686        if (i == len) {
 687            break;
 688        }
 689
 690        ncpy = DMA_PAGESIZE - (addr & (DMA_PAGESIZE - 1));
 691        if (ncpy > len - i)
 692            ncpy = len - i;
 693
 694        /* Get DMA translation table entry */
 695        index = addr / DMA_PAGESIZE;
 696        if (index >= s->dma_tl_limit / sizeof(dma_pagetable_entry)) {
 697            break;
 698        }
 699        entry_addr = s->dma_tl_base + index * sizeof(dma_pagetable_entry);
 700        /* XXX: not sure. should we really use only lowest bits? */
 701        entry_addr &= 0x7fffffff;
 702        cpu_physical_memory_read(entry_addr, &entry, sizeof(entry));
 703
 704        /* Read/write data at right place */
 705        phys_addr = entry.frame + (addr & (DMA_PAGESIZE - 1));
 706        cpu_physical_memory_rw(phys_addr, &buf[i], ncpy, is_write);
 707
 708        i += ncpy;
 709        addr += ncpy;
 710    }
 711}
 712
 713static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_write)
 714{
 715    rc4030State *s = opaque;
 716    hwaddr dma_addr;
 717    int dev_to_mem;
 718
 719    s->dma_regs[n][DMA_REG_ENABLE] &= ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);
 720
 721    /* Check DMA channel consistency */
 722    dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;
 723    if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||
 724        (is_write != dev_to_mem)) {
 725        s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
 726        s->nmi_interrupt |= 1 << n;
 727        return;
 728    }
 729
 730    /* Get start address and len */
 731    if (len > s->dma_regs[n][DMA_REG_COUNT])
 732        len = s->dma_regs[n][DMA_REG_COUNT];
 733    dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
 734
 735    /* Read/write data at right place */
 736    rc4030_dma_memory_rw(opaque, dma_addr, buf, len, is_write);
 737
 738    s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
 739    s->dma_regs[n][DMA_REG_COUNT] -= len;
 740
 741#ifdef DEBUG_RC4030_DMA
 742    {
 743        int i, j;
 744        printf("rc4030 dma: Copying %d bytes %s host %p\n",
 745            len, is_write ? "from" : "to", buf);
 746        for (i = 0; i < len; i += 16) {
 747            int n = 16;
 748            if (n > len - i) {
 749                n = len - i;
 750            }
 751            for (j = 0; j < n; j++)
 752                printf("%02x ", buf[i + j]);
 753            while (j++ < 16)
 754                printf("   ");
 755            printf("| ");
 756            for (j = 0; j < n; j++)
 757                printf("%c", isprint(buf[i + j]) ? buf[i + j] : '.');
 758            printf("\n");
 759        }
 760    }
 761#endif
 762}
 763
 764struct rc4030DMAState {
 765    void *opaque;
 766    int n;
 767};
 768
 769void rc4030_dma_read(void *dma, uint8_t *buf, int len)
 770{
 771    rc4030_dma s = dma;
 772    rc4030_do_dma(s->opaque, s->n, buf, len, 0);
 773}
 774
 775void rc4030_dma_write(void *dma, uint8_t *buf, int len)
 776{
 777    rc4030_dma s = dma;
 778    rc4030_do_dma(s->opaque, s->n, buf, len, 1);
 779}
 780
 781static rc4030_dma *rc4030_allocate_dmas(void *opaque, int n)
 782{
 783    rc4030_dma *s;
 784    struct rc4030DMAState *p;
 785    int i;
 786
 787    s = (rc4030_dma *)g_malloc0(sizeof(rc4030_dma) * n);
 788    p = (struct rc4030DMAState *)g_malloc0(sizeof(struct rc4030DMAState) * n);
 789    for (i = 0; i < n; i++) {
 790        p->opaque = opaque;
 791        p->n = i;
 792        s[i] = p;
 793        p++;
 794    }
 795    return s;
 796}
 797
 798void *rc4030_init(qemu_irq timer, qemu_irq jazz_bus,
 799                  qemu_irq **irqs, rc4030_dma **dmas,
 800                  MemoryRegion *sysmem)
 801{
 802    rc4030State *s;
 803
 804    s = g_malloc0(sizeof(rc4030State));
 805
 806    *irqs = qemu_allocate_irqs(rc4030_irq_jazz_request, s, 16);
 807    *dmas = rc4030_allocate_dmas(s, 4);
 808
 809    s->periodic_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, rc4030_periodic_timer, s);
 810    s->timer_irq = timer;
 811    s->jazz_bus_irq = jazz_bus;
 812
 813    qemu_register_reset(rc4030_reset, s);
 814    register_savevm(NULL, "rc4030", 0, 2, rc4030_save, rc4030_load, s);
 815    rc4030_reset(s);
 816
 817    memory_region_init_io(&s->iomem_chipset, NULL, &rc4030_ops, s,
 818                          "rc4030.chipset", 0x300);
 819    memory_region_add_subregion(sysmem, 0x80000000, &s->iomem_chipset);
 820    memory_region_init_io(&s->iomem_jazzio, NULL, &jazzio_ops, s,
 821                          "rc4030.jazzio", 0x00001000);
 822    memory_region_add_subregion(sysmem, 0xf0000000, &s->iomem_jazzio);
 823
 824    return s;
 825}
 826