qemu/hw/display/xlnx_dp.c
<<
>>
Prefs
   1/*
   2 * xlnx_dp.c
   3 *
   4 *  Copyright (C) 2015 : GreenSocs Ltd
   5 *      http://www.greensocs.com/ , email: info@greensocs.com
   6 *
   7 *  Developed by :
   8 *  Frederic Konrad   <fred.konrad@greensocs.com>
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License as published by
  12 * the Free Software Foundation, either version 2 of the License, or
  13 * (at your option)any later version.
  14 *
  15 * This program is distributed in the hope that it will be useful,
  16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 * GNU General Public License for more details.
  19 *
  20 * You should have received a copy of the GNU General Public License along
  21 * with this program; if not, see <http://www.gnu.org/licenses/>.
  22 *
  23 */
  24
  25#include "qemu/osdep.h"
  26#include "qapi/error.h"
  27#include "qemu/log.h"
  28#include "hw/display/xlnx_dp.h"
  29
  30#ifndef DEBUG_DP
  31#define DEBUG_DP 0
  32#endif
  33
  34#define DPRINTF(fmt, ...) do {                                                 \
  35    if (DEBUG_DP) {                                                            \
  36        qemu_log("xlnx_dp: " fmt , ## __VA_ARGS__);                            \
  37    }                                                                          \
  38} while (0)
  39
  40/*
  41 * Register offset for DP.
  42 */
  43#define DP_LINK_BW_SET                      (0x0000 >> 2)
  44#define DP_LANE_COUNT_SET                   (0x0004 >> 2)
  45#define DP_ENHANCED_FRAME_EN                (0x0008 >> 2)
  46#define DP_TRAINING_PATTERN_SET             (0x000C >> 2)
  47#define DP_LINK_QUAL_PATTERN_SET            (0x0010 >> 2)
  48#define DP_SCRAMBLING_DISABLE               (0x0014 >> 2)
  49#define DP_DOWNSPREAD_CTRL                  (0x0018 >> 2)
  50#define DP_SOFTWARE_RESET                   (0x001C >> 2)
  51#define DP_TRANSMITTER_ENABLE               (0x0080 >> 2)
  52#define DP_MAIN_STREAM_ENABLE               (0x0084 >> 2)
  53#define DP_FORCE_SCRAMBLER_RESET            (0x00C0 >> 2)
  54#define DP_VERSION_REGISTER                 (0x00F8 >> 2)
  55#define DP_CORE_ID                          (0x00FC >> 2)
  56
  57#define DP_AUX_COMMAND_REGISTER             (0x0100 >> 2)
  58#define AUX_ADDR_ONLY_MASK                  (0x1000)
  59#define AUX_COMMAND_MASK                    (0x0F00)
  60#define AUX_COMMAND_SHIFT                   (8)
  61#define AUX_COMMAND_NBYTES                  (0x000F)
  62
  63#define DP_AUX_WRITE_FIFO                   (0x0104 >> 2)
  64#define DP_AUX_ADDRESS                      (0x0108 >> 2)
  65#define DP_AUX_CLOCK_DIVIDER                (0x010C >> 2)
  66#define DP_TX_USER_FIFO_OVERFLOW            (0x0110 >> 2)
  67#define DP_INTERRUPT_SIGNAL_STATE           (0x0130 >> 2)
  68#define DP_AUX_REPLY_DATA                   (0x0134 >> 2)
  69#define DP_AUX_REPLY_CODE                   (0x0138 >> 2)
  70#define DP_AUX_REPLY_COUNT                  (0x013C >> 2)
  71#define DP_REPLY_DATA_COUNT                 (0x0148 >> 2)
  72#define DP_REPLY_STATUS                     (0x014C >> 2)
  73#define DP_HPD_DURATION                     (0x0150 >> 2)
  74#define DP_MAIN_STREAM_HTOTAL               (0x0180 >> 2)
  75#define DP_MAIN_STREAM_VTOTAL               (0x0184 >> 2)
  76#define DP_MAIN_STREAM_POLARITY             (0x0188 >> 2)
  77#define DP_MAIN_STREAM_HSWIDTH              (0x018C >> 2)
  78#define DP_MAIN_STREAM_VSWIDTH              (0x0190 >> 2)
  79#define DP_MAIN_STREAM_HRES                 (0x0194 >> 2)
  80#define DP_MAIN_STREAM_VRES                 (0x0198 >> 2)
  81#define DP_MAIN_STREAM_HSTART               (0x019C >> 2)
  82#define DP_MAIN_STREAM_VSTART               (0x01A0 >> 2)
  83#define DP_MAIN_STREAM_MISC0                (0x01A4 >> 2)
  84#define DP_MAIN_STREAM_MISC1                (0x01A8 >> 2)
  85#define DP_MAIN_STREAM_M_VID                (0x01AC >> 2)
  86#define DP_MSA_TRANSFER_UNIT_SIZE           (0x01B0 >> 2)
  87#define DP_MAIN_STREAM_N_VID                (0x01B4 >> 2)
  88#define DP_USER_DATA_COUNT_PER_LANE         (0x01BC >> 2)
  89#define DP_MIN_BYTES_PER_TU                 (0x01C4 >> 2)
  90#define DP_FRAC_BYTES_PER_TU                (0x01C8 >> 2)
  91#define DP_INIT_WAIT                        (0x01CC >> 2)
  92#define DP_PHY_RESET                        (0x0200 >> 2)
  93#define DP_PHY_VOLTAGE_DIFF_LANE_0          (0x0220 >> 2)
  94#define DP_PHY_VOLTAGE_DIFF_LANE_1          (0x0224 >> 2)
  95#define DP_TRANSMIT_PRBS7                   (0x0230 >> 2)
  96#define DP_PHY_CLOCK_SELECT                 (0x0234 >> 2)
  97#define DP_TX_PHY_POWER_DOWN                (0x0238 >> 2)
  98#define DP_PHY_PRECURSOR_LANE_0             (0x023C >> 2)
  99#define DP_PHY_PRECURSOR_LANE_1             (0x0240 >> 2)
 100#define DP_PHY_POSTCURSOR_LANE_0            (0x024C >> 2)
 101#define DP_PHY_POSTCURSOR_LANE_1            (0x0250 >> 2)
 102#define DP_PHY_STATUS                       (0x0280 >> 2)
 103
 104#define DP_TX_AUDIO_CONTROL                 (0x0300 >> 2)
 105#define DP_TX_AUD_CTRL                      (1)
 106
 107#define DP_TX_AUDIO_CHANNELS                (0x0304 >> 2)
 108#define DP_TX_AUDIO_INFO_DATA(n)            ((0x0308 + 4 * n) >> 2)
 109#define DP_TX_M_AUD                         (0x0328 >> 2)
 110#define DP_TX_N_AUD                         (0x032C >> 2)
 111#define DP_TX_AUDIO_EXT_DATA(n)             ((0x0330 + 4 * n) >> 2)
 112#define DP_INT_STATUS                       (0x03A0 >> 2)
 113#define DP_INT_MASK                         (0x03A4 >> 2)
 114#define DP_INT_EN                           (0x03A8 >> 2)
 115#define DP_INT_DS                           (0x03AC >> 2)
 116
 117/*
 118 * Registers offset for Audio Video Buffer configuration.
 119 */
 120#define V_BLEND_OFFSET                      (0xA000)
 121#define V_BLEND_BG_CLR_0                    (0x0000 >> 2)
 122#define V_BLEND_BG_CLR_1                    (0x0004 >> 2)
 123#define V_BLEND_BG_CLR_2                    (0x0008 >> 2)
 124#define V_BLEND_SET_GLOBAL_ALPHA_REG        (0x000C >> 2)
 125#define V_BLEND_OUTPUT_VID_FORMAT           (0x0014 >> 2)
 126#define V_BLEND_LAYER0_CONTROL              (0x0018 >> 2)
 127#define V_BLEND_LAYER1_CONTROL              (0x001C >> 2)
 128
 129#define V_BLEND_RGB2YCBCR_COEFF(n)          ((0x0020 + 4 * n) >> 2)
 130#define V_BLEND_IN1CSC_COEFF(n)             ((0x0044 + 4 * n) >> 2)
 131
 132#define V_BLEND_LUMA_IN1CSC_OFFSET          (0x0068 >> 2)
 133#define V_BLEND_CR_IN1CSC_OFFSET            (0x006C >> 2)
 134#define V_BLEND_CB_IN1CSC_OFFSET            (0x0070 >> 2)
 135#define V_BLEND_LUMA_OUTCSC_OFFSET          (0x0074 >> 2)
 136#define V_BLEND_CR_OUTCSC_OFFSET            (0x0078 >> 2)
 137#define V_BLEND_CB_OUTCSC_OFFSET            (0x007C >> 2)
 138
 139#define V_BLEND_IN2CSC_COEFF(n)             ((0x0080 + 4 * n) >> 2)
 140
 141#define V_BLEND_LUMA_IN2CSC_OFFSET          (0x00A4 >> 2)
 142#define V_BLEND_CR_IN2CSC_OFFSET            (0x00A8 >> 2)
 143#define V_BLEND_CB_IN2CSC_OFFSET            (0x00AC >> 2)
 144#define V_BLEND_CHROMA_KEY_ENABLE           (0x01D0 >> 2)
 145#define V_BLEND_CHROMA_KEY_COMP1            (0x01D4 >> 2)
 146#define V_BLEND_CHROMA_KEY_COMP2            (0x01D8 >> 2)
 147#define V_BLEND_CHROMA_KEY_COMP3            (0x01DC >> 2)
 148
 149/*
 150 * Registers offset for Audio Video Buffer configuration.
 151 */
 152#define AV_BUF_MANAGER_OFFSET               (0xB000)
 153#define AV_BUF_FORMAT                       (0x0000 >> 2)
 154#define AV_BUF_NON_LIVE_LATENCY             (0x0008 >> 2)
 155#define AV_CHBUF0                           (0x0010 >> 2)
 156#define AV_CHBUF1                           (0x0014 >> 2)
 157#define AV_CHBUF2                           (0x0018 >> 2)
 158#define AV_CHBUF3                           (0x001C >> 2)
 159#define AV_CHBUF4                           (0x0020 >> 2)
 160#define AV_CHBUF5                           (0x0024 >> 2)
 161#define AV_BUF_STC_CONTROL                  (0x002C >> 2)
 162#define AV_BUF_STC_INIT_VALUE0              (0x0030 >> 2)
 163#define AV_BUF_STC_INIT_VALUE1              (0x0034 >> 2)
 164#define AV_BUF_STC_ADJ                      (0x0038 >> 2)
 165#define AV_BUF_STC_VIDEO_VSYNC_TS_REG0      (0x003C >> 2)
 166#define AV_BUF_STC_VIDEO_VSYNC_TS_REG1      (0x0040 >> 2)
 167#define AV_BUF_STC_EXT_VSYNC_TS_REG0        (0x0044 >> 2)
 168#define AV_BUF_STC_EXT_VSYNC_TS_REG1        (0x0048 >> 2)
 169#define AV_BUF_STC_CUSTOM_EVENT_TS_REG0     (0x004C >> 2)
 170#define AV_BUF_STC_CUSTOM_EVENT_TS_REG1     (0x0050 >> 2)
 171#define AV_BUF_STC_CUSTOM_EVENT2_TS_REG0    (0x0054 >> 2)
 172#define AV_BUF_STC_CUSTOM_EVENT2_TS_REG1    (0x0058 >> 2)
 173#define AV_BUF_STC_SNAPSHOT0                (0x0060 >> 2)
 174#define AV_BUF_STC_SNAPSHOT1                (0x0064 >> 2)
 175#define AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT    (0x0070 >> 2)
 176#define AV_BUF_HCOUNT_VCOUNT_INT0           (0x0074 >> 2)
 177#define AV_BUF_HCOUNT_VCOUNT_INT1           (0x0078 >> 2)
 178#define AV_BUF_DITHER_CONFIG                (0x007C >> 2)
 179#define AV_BUF_DITHER_CONFIG_MAX            (0x008C >> 2)
 180#define AV_BUF_DITHER_CONFIG_MIN            (0x0090 >> 2)
 181#define AV_BUF_PATTERN_GEN_SELECT           (0x0100 >> 2)
 182#define AV_BUF_AUD_VID_CLK_SOURCE           (0x0120 >> 2)
 183#define AV_BUF_SRST_REG                     (0x0124 >> 2)
 184#define AV_BUF_AUDIO_RDY_INTERVAL           (0x0128 >> 2)
 185#define AV_BUF_AUDIO_CH_CONFIG              (0x012C >> 2)
 186
 187#define AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(n)((0x0200 + 4 * n) >> 2)
 188
 189#define AV_BUF_VIDEO_COMP_SCALE_FACTOR(n)   ((0x020C + 4 * n) >> 2)
 190
 191#define AV_BUF_LIVE_VIDEO_COMP_SF(n)        ((0x0218 + 4 * n) >> 2)
 192
 193#define AV_BUF_LIVE_VID_CONFIG              (0x0224 >> 2)
 194
 195#define AV_BUF_LIVE_GFX_COMP_SF(n)          ((0x0228 + 4 * n) >> 2)
 196
 197#define AV_BUF_LIVE_GFX_CONFIG              (0x0234 >> 2)
 198
 199#define AUDIO_MIXER_REGISTER_OFFSET         (0xC000)
 200#define AUDIO_MIXER_VOLUME_CONTROL          (0x0000 >> 2)
 201#define AUDIO_MIXER_META_DATA               (0x0004 >> 2)
 202#define AUD_CH_STATUS_REG(n)                ((0x0008 + 4 * n) >> 2)
 203#define AUD_CH_A_DATA_REG(n)                ((0x0020 + 4 * n) >> 2)
 204#define AUD_CH_B_DATA_REG(n)                ((0x0038 + 4 * n) >> 2)
 205
 206#define DP_AUDIO_DMA_CHANNEL(n)             (4 + n)
 207#define DP_GRAPHIC_DMA_CHANNEL              (3)
 208#define DP_VIDEO_DMA_CHANNEL                (0)
 209
 210enum DPGraphicFmt {
 211    DP_GRAPHIC_RGBA8888 = 0 << 8,
 212    DP_GRAPHIC_ABGR8888 = 1 << 8,
 213    DP_GRAPHIC_RGB888 = 2 << 8,
 214    DP_GRAPHIC_BGR888 = 3 << 8,
 215    DP_GRAPHIC_RGBA5551 = 4 << 8,
 216    DP_GRAPHIC_RGBA4444 = 5 << 8,
 217    DP_GRAPHIC_RGB565 = 6 << 8,
 218    DP_GRAPHIC_8BPP = 7 << 8,
 219    DP_GRAPHIC_4BPP = 8 << 8,
 220    DP_GRAPHIC_2BPP = 9 << 8,
 221    DP_GRAPHIC_1BPP = 10 << 8,
 222    DP_GRAPHIC_MASK = 0xF << 8
 223};
 224
 225enum DPVideoFmt {
 226    DP_NL_VID_CB_Y0_CR_Y1 = 0,
 227    DP_NL_VID_CR_Y0_CB_Y1 = 1,
 228    DP_NL_VID_Y0_CR_Y1_CB = 2,
 229    DP_NL_VID_Y0_CB_Y1_CR = 3,
 230    DP_NL_VID_YV16 = 4,
 231    DP_NL_VID_YV24 = 5,
 232    DP_NL_VID_YV16CL = 6,
 233    DP_NL_VID_MONO = 7,
 234    DP_NL_VID_YV16CL2 = 8,
 235    DP_NL_VID_YUV444 = 9,
 236    DP_NL_VID_RGB888 = 10,
 237    DP_NL_VID_RGBA8880 = 11,
 238    DP_NL_VID_RGB888_10BPC = 12,
 239    DP_NL_VID_YUV444_10BPC = 13,
 240    DP_NL_VID_YV16CL2_10BPC = 14,
 241    DP_NL_VID_YV16CL_10BPC = 15,
 242    DP_NL_VID_YV16_10BPC = 16,
 243    DP_NL_VID_YV24_10BPC = 17,
 244    DP_NL_VID_Y_ONLY_10BPC = 18,
 245    DP_NL_VID_YV16_420 = 19,
 246    DP_NL_VID_YV16CL_420 = 20,
 247    DP_NL_VID_YV16CL2_420 = 21,
 248    DP_NL_VID_YV16_420_10BPC = 22,
 249    DP_NL_VID_YV16CL_420_10BPC = 23,
 250    DP_NL_VID_YV16CL2_420_10BPC = 24,
 251    DP_NL_VID_FMT_MASK = 0x1F
 252};
 253
 254typedef enum DPGraphicFmt DPGraphicFmt;
 255typedef enum DPVideoFmt DPVideoFmt;
 256
 257static const VMStateDescription vmstate_dp = {
 258    .name = TYPE_XLNX_DP,
 259    .version_id = 1,
 260    .fields = (VMStateField[]){
 261        VMSTATE_UINT32_ARRAY(core_registers, XlnxDPState,
 262                             DP_CORE_REG_ARRAY_SIZE),
 263        VMSTATE_UINT32_ARRAY(avbufm_registers, XlnxDPState,
 264                             DP_AVBUF_REG_ARRAY_SIZE),
 265        VMSTATE_UINT32_ARRAY(vblend_registers, XlnxDPState,
 266                             DP_VBLEND_REG_ARRAY_SIZE),
 267        VMSTATE_UINT32_ARRAY(audio_registers, XlnxDPState,
 268                             DP_AUDIO_REG_ARRAY_SIZE),
 269        VMSTATE_END_OF_LIST()
 270    }
 271};
 272
 273static void xlnx_dp_update_irq(XlnxDPState *s);
 274
 275static uint64_t xlnx_dp_audio_read(void *opaque, hwaddr offset, unsigned size)
 276{
 277    XlnxDPState *s = XLNX_DP(opaque);
 278
 279    offset = offset >> 2;
 280    return s->audio_registers[offset];
 281}
 282
 283static void xlnx_dp_audio_write(void *opaque, hwaddr offset, uint64_t value,
 284                                unsigned size)
 285{
 286    XlnxDPState *s = XLNX_DP(opaque);
 287
 288    offset = offset >> 2;
 289
 290    switch (offset) {
 291    case AUDIO_MIXER_META_DATA:
 292        s->audio_registers[offset] = value & 0x00000001;
 293        break;
 294    default:
 295        s->audio_registers[offset] = value;
 296        break;
 297    }
 298}
 299
 300static const MemoryRegionOps audio_ops = {
 301    .read = xlnx_dp_audio_read,
 302    .write = xlnx_dp_audio_write,
 303    .endianness = DEVICE_NATIVE_ENDIAN,
 304};
 305
 306static inline uint32_t xlnx_dp_audio_get_volume(XlnxDPState *s,
 307                                                uint8_t channel)
 308{
 309    switch (channel) {
 310    case 0:
 311        return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 0, 16);
 312    case 1:
 313        return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 16,
 314                                                                         16);
 315    default:
 316        return 0;
 317    }
 318}
 319
 320static inline void xlnx_dp_audio_activate(XlnxDPState *s)
 321{
 322    bool activated = ((s->core_registers[DP_TX_AUDIO_CONTROL]
 323                   & DP_TX_AUD_CTRL) != 0);
 324    AUD_set_active_out(s->amixer_output_stream, activated);
 325    xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(0),
 326                                      &s->audio_buffer_0);
 327    xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(1),
 328                                      &s->audio_buffer_1);
 329}
 330
 331static inline void xlnx_dp_audio_mix_buffer(XlnxDPState *s)
 332{
 333    /*
 334     * Audio packets are signed and have this shape:
 335     * | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
 336     * | R3 | L3 | R2 | L2 | R1 | L1 | R0 | L0 |
 337     *
 338     * Output audio is 16bits saturated.
 339     */
 340    int i;
 341
 342    if ((s->audio_data_available[0]) && (xlnx_dp_audio_get_volume(s, 0))) {
 343        for (i = 0; i < s->audio_data_available[0] / 2; i++) {
 344            s->temp_buffer[i] = (int64_t)(s->audio_buffer_0[i])
 345                              * xlnx_dp_audio_get_volume(s, 0) / 8192;
 346        }
 347        s->byte_left = s->audio_data_available[0];
 348    } else {
 349        memset(s->temp_buffer, 0, s->audio_data_available[1] / 2);
 350    }
 351
 352    if ((s->audio_data_available[1]) && (xlnx_dp_audio_get_volume(s, 1))) {
 353        if ((s->audio_data_available[0] == 0)
 354        || (s->audio_data_available[1] == s->audio_data_available[0])) {
 355            for (i = 0; i < s->audio_data_available[1] / 2; i++) {
 356                s->temp_buffer[i] += (int64_t)(s->audio_buffer_1[i])
 357                                   * xlnx_dp_audio_get_volume(s, 1) / 8192;
 358            }
 359            s->byte_left = s->audio_data_available[1];
 360        }
 361    }
 362
 363    for (i = 0; i < s->byte_left / 2; i++) {
 364        s->out_buffer[i] = MAX(-32767, MIN(s->temp_buffer[i], 32767));
 365    }
 366
 367    s->data_ptr = 0;
 368}
 369
 370static void xlnx_dp_audio_callback(void *opaque, int avail)
 371{
 372    /*
 373     * Get some data from the DPDMA and compute these datas.
 374     * Then wait for QEMU's audio subsystem to call this callback.
 375     */
 376    XlnxDPState *s = XLNX_DP(opaque);
 377    size_t written = 0;
 378
 379    /* If there are already some data don't get more data. */
 380    if (s->byte_left == 0) {
 381        s->audio_data_available[0] = xlnx_dpdma_start_operation(s->dpdma, 4,
 382                                                                  true);
 383        s->audio_data_available[1] = xlnx_dpdma_start_operation(s->dpdma, 5,
 384                                                                  true);
 385        xlnx_dp_audio_mix_buffer(s);
 386    }
 387
 388    /* Send the buffer through the audio. */
 389    if (s->byte_left <= MAX_QEMU_BUFFER_SIZE) {
 390        if (s->byte_left != 0) {
 391            written = AUD_write(s->amixer_output_stream,
 392                                &s->out_buffer[s->data_ptr], s->byte_left);
 393        } else {
 394            /*
 395             * There is nothing to play.. We don't have any data! Fill the
 396             * buffer with zero's and send it.
 397             */
 398            written = 0;
 399            memset(s->out_buffer, 0, 1024);
 400            AUD_write(s->amixer_output_stream, s->out_buffer, 1024);
 401        }
 402    } else {
 403        written = AUD_write(s->amixer_output_stream,
 404                            &s->out_buffer[s->data_ptr], MAX_QEMU_BUFFER_SIZE);
 405    }
 406    s->byte_left -= written;
 407    s->data_ptr += written;
 408}
 409
 410/*
 411 * AUX channel related function.
 412 */
 413static void xlnx_dp_aux_clear_rx_fifo(XlnxDPState *s)
 414{
 415    fifo8_reset(&s->rx_fifo);
 416}
 417
 418static void xlnx_dp_aux_push_rx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
 419{
 420    DPRINTF("Push %u data in rx_fifo\n", (unsigned)len);
 421    fifo8_push_all(&s->rx_fifo, buf, len);
 422}
 423
 424static uint8_t xlnx_dp_aux_pop_rx_fifo(XlnxDPState *s)
 425{
 426    uint8_t ret;
 427
 428    if (fifo8_is_empty(&s->rx_fifo)) {
 429        DPRINTF("rx_fifo underflow..\n");
 430        abort();
 431    }
 432    ret = fifo8_pop(&s->rx_fifo);
 433    DPRINTF("pop 0x%" PRIX8 " from rx_fifo.\n", ret);
 434    return ret;
 435}
 436
 437static void xlnx_dp_aux_clear_tx_fifo(XlnxDPState *s)
 438{
 439    fifo8_reset(&s->tx_fifo);
 440}
 441
 442static void xlnx_dp_aux_push_tx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
 443{
 444    DPRINTF("Push %u data in tx_fifo\n", (unsigned)len);
 445    fifo8_push_all(&s->tx_fifo, buf, len);
 446}
 447
 448static uint8_t xlnx_dp_aux_pop_tx_fifo(XlnxDPState *s)
 449{
 450    uint8_t ret;
 451
 452    if (fifo8_is_empty(&s->tx_fifo)) {
 453        DPRINTF("tx_fifo underflow..\n");
 454        abort();
 455    }
 456    ret = fifo8_pop(&s->tx_fifo);
 457    DPRINTF("pop 0x%2.2X from tx_fifo.\n", ret);
 458    return ret;
 459}
 460
 461static uint32_t xlnx_dp_aux_get_address(XlnxDPState *s)
 462{
 463    return s->core_registers[DP_AUX_ADDRESS];
 464}
 465
 466/*
 467 * Get command from the register.
 468 */
 469static void xlnx_dp_aux_set_command(XlnxDPState *s, uint32_t value)
 470{
 471    bool address_only = (value & AUX_ADDR_ONLY_MASK) != 0;
 472    AUXCommand cmd = (value & AUX_COMMAND_MASK) >> AUX_COMMAND_SHIFT;
 473    uint8_t nbytes = (value & AUX_COMMAND_NBYTES) + 1;
 474    uint8_t buf[16];
 475    int i;
 476
 477    /*
 478     * When an address_only command is executed nothing happen to the fifo, so
 479     * just make nbytes = 0.
 480     */
 481    if (address_only) {
 482        nbytes = 0;
 483    }
 484
 485    switch (cmd) {
 486    case READ_AUX:
 487    case READ_I2C:
 488    case READ_I2C_MOT:
 489        s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
 490                                               xlnx_dp_aux_get_address(s),
 491                                               nbytes, buf);
 492        s->core_registers[DP_REPLY_DATA_COUNT] = nbytes;
 493
 494        if (s->core_registers[DP_AUX_REPLY_CODE] == AUX_I2C_ACK) {
 495            xlnx_dp_aux_push_rx_fifo(s, buf, nbytes);
 496        }
 497        break;
 498    case WRITE_AUX:
 499    case WRITE_I2C:
 500    case WRITE_I2C_MOT:
 501        for (i = 0; i < nbytes; i++) {
 502            buf[i] = xlnx_dp_aux_pop_tx_fifo(s);
 503        }
 504        s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
 505                                               xlnx_dp_aux_get_address(s),
 506                                               nbytes, buf);
 507        xlnx_dp_aux_clear_tx_fifo(s);
 508        break;
 509    case WRITE_I2C_STATUS:
 510        qemu_log_mask(LOG_UNIMP, "xlnx_dp: Write i2c status not implemented\n");
 511        break;
 512    default:
 513        abort();
 514    }
 515
 516    s->core_registers[DP_INTERRUPT_SIGNAL_STATE] |= 0x04;
 517}
 518
 519static void xlnx_dp_set_dpdma(const Object *obj, const char *name, Object *val,
 520                              Error **errp)
 521{
 522    XlnxDPState *s = XLNX_DP(obj);
 523    if (s->console) {
 524        DisplaySurface *surface = qemu_console_surface(s->console);
 525        XlnxDPDMAState *dma = XLNX_DPDMA(val);
 526        xlnx_dpdma_set_host_data_location(dma, DP_GRAPHIC_DMA_CHANNEL,
 527                                          surface_data(surface));
 528    }
 529}
 530
 531static inline uint8_t xlnx_dp_global_alpha_value(XlnxDPState *s)
 532{
 533    return (s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x1FE) >> 1;
 534}
 535
 536static inline bool xlnx_dp_global_alpha_enabled(XlnxDPState *s)
 537{
 538    /*
 539     * If the alpha is totally opaque (255) we consider the alpha is disabled to
 540     * reduce CPU consumption.
 541     */
 542    return ((xlnx_dp_global_alpha_value(s) != 0xFF) &&
 543           ((s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x01) != 0));
 544}
 545
 546static void xlnx_dp_recreate_surface(XlnxDPState *s)
 547{
 548    /*
 549     * Two possibilities, if blending is enabled the console displays
 550     * bout_plane, if not g_plane is displayed.
 551     */
 552    uint16_t width = s->core_registers[DP_MAIN_STREAM_HRES];
 553    uint16_t height = s->core_registers[DP_MAIN_STREAM_VRES];
 554    DisplaySurface *current_console_surface = qemu_console_surface(s->console);
 555
 556    if ((width != 0) && (height != 0)) {
 557        /*
 558         * As dpy_gfx_replace_surface calls qemu_free_displaysurface on the
 559         * surface we need to be careful and don't free the surface associated
 560         * to the console or double free will happen.
 561         */
 562        if (s->bout_plane.surface != current_console_surface) {
 563            qemu_free_displaysurface(s->bout_plane.surface);
 564        }
 565        if (s->v_plane.surface != current_console_surface) {
 566            qemu_free_displaysurface(s->v_plane.surface);
 567        }
 568        if (s->g_plane.surface != current_console_surface) {
 569            qemu_free_displaysurface(s->g_plane.surface);
 570        }
 571
 572        s->g_plane.surface
 573                = qemu_create_displaysurface_from(width, height,
 574                                                  s->g_plane.format, 0, NULL);
 575        s->v_plane.surface
 576                = qemu_create_displaysurface_from(width, height,
 577                                                  s->v_plane.format, 0, NULL);
 578        if (xlnx_dp_global_alpha_enabled(s)) {
 579            s->bout_plane.surface =
 580                            qemu_create_displaysurface_from(width,
 581                                                            height,
 582                                                            s->g_plane.format,
 583                                                            0, NULL);
 584            dpy_gfx_replace_surface(s->console, s->bout_plane.surface);
 585        } else {
 586            s->bout_plane.surface = NULL;
 587            dpy_gfx_replace_surface(s->console, s->g_plane.surface);
 588        }
 589
 590        xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
 591                                            surface_data(s->g_plane.surface));
 592        xlnx_dpdma_set_host_data_location(s->dpdma, DP_VIDEO_DMA_CHANNEL,
 593                                            surface_data(s->v_plane.surface));
 594    }
 595}
 596
 597/*
 598 * Change the graphic format of the surface.
 599 */
 600static void xlnx_dp_change_graphic_fmt(XlnxDPState *s)
 601{
 602    switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK) {
 603    case DP_GRAPHIC_RGBA8888:
 604        s->g_plane.format = PIXMAN_r8g8b8a8;
 605        break;
 606    case DP_GRAPHIC_ABGR8888:
 607        s->g_plane.format = PIXMAN_a8b8g8r8;
 608        break;
 609    case DP_GRAPHIC_RGB565:
 610        s->g_plane.format = PIXMAN_r5g6b5;
 611        break;
 612    case DP_GRAPHIC_RGB888:
 613        s->g_plane.format = PIXMAN_r8g8b8;
 614        break;
 615    case DP_GRAPHIC_BGR888:
 616        s->g_plane.format = PIXMAN_b8g8r8;
 617        break;
 618    default:
 619        DPRINTF("error: unsupported graphic format %u.\n",
 620                s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK);
 621        abort();
 622    }
 623
 624    switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK) {
 625    case 0:
 626        s->v_plane.format = PIXMAN_x8b8g8r8;
 627        break;
 628    case DP_NL_VID_Y0_CB_Y1_CR:
 629        s->v_plane.format = PIXMAN_yuy2;
 630        break;
 631    case DP_NL_VID_RGBA8880:
 632        s->v_plane.format = PIXMAN_x8b8g8r8;
 633        break;
 634    default:
 635        DPRINTF("error: unsupported video format %u.\n",
 636                s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK);
 637        abort();
 638    }
 639
 640    xlnx_dp_recreate_surface(s);
 641}
 642
 643static void xlnx_dp_update_irq(XlnxDPState *s)
 644{
 645    uint32_t flags;
 646
 647    flags = s->core_registers[DP_INT_STATUS] & ~s->core_registers[DP_INT_MASK];
 648    DPRINTF("update IRQ value = %" PRIx32 "\n", flags);
 649    qemu_set_irq(s->irq, flags != 0);
 650}
 651
 652static uint64_t xlnx_dp_read(void *opaque, hwaddr offset, unsigned size)
 653{
 654    XlnxDPState *s = XLNX_DP(opaque);
 655    uint64_t ret = 0;
 656
 657    offset = offset >> 2;
 658
 659    switch (offset) {
 660    case DP_TX_USER_FIFO_OVERFLOW:
 661        /* This register is cleared after a read */
 662        ret = s->core_registers[DP_TX_USER_FIFO_OVERFLOW];
 663        s->core_registers[DP_TX_USER_FIFO_OVERFLOW] = 0;
 664        break;
 665    case DP_AUX_REPLY_DATA:
 666        ret = xlnx_dp_aux_pop_rx_fifo(s);
 667        break;
 668    case DP_INTERRUPT_SIGNAL_STATE:
 669        /*
 670         * XXX: Not sure it is the right thing to do actually.
 671         * The register is not written by the device driver so it's stuck
 672         * to 0x04.
 673         */
 674        ret = s->core_registers[DP_INTERRUPT_SIGNAL_STATE];
 675        s->core_registers[DP_INTERRUPT_SIGNAL_STATE] &= ~0x04;
 676        break;
 677    case DP_AUX_WRITE_FIFO:
 678    case DP_TX_AUDIO_INFO_DATA(0):
 679    case DP_TX_AUDIO_INFO_DATA(1):
 680    case DP_TX_AUDIO_INFO_DATA(2):
 681    case DP_TX_AUDIO_INFO_DATA(3):
 682    case DP_TX_AUDIO_INFO_DATA(4):
 683    case DP_TX_AUDIO_INFO_DATA(5):
 684    case DP_TX_AUDIO_INFO_DATA(6):
 685    case DP_TX_AUDIO_INFO_DATA(7):
 686    case DP_TX_AUDIO_EXT_DATA(0):
 687    case DP_TX_AUDIO_EXT_DATA(1):
 688    case DP_TX_AUDIO_EXT_DATA(2):
 689    case DP_TX_AUDIO_EXT_DATA(3):
 690    case DP_TX_AUDIO_EXT_DATA(4):
 691    case DP_TX_AUDIO_EXT_DATA(5):
 692    case DP_TX_AUDIO_EXT_DATA(6):
 693    case DP_TX_AUDIO_EXT_DATA(7):
 694    case DP_TX_AUDIO_EXT_DATA(8):
 695        /* write only registers */
 696        ret = 0;
 697        break;
 698    default:
 699        assert(offset <= (0x3AC >> 2));
 700        ret = s->core_registers[offset];
 701        break;
 702    }
 703
 704    DPRINTF("core read @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset << 2, ret);
 705    return ret;
 706}
 707
 708static void xlnx_dp_write(void *opaque, hwaddr offset, uint64_t value,
 709                          unsigned size)
 710{
 711    XlnxDPState *s = XLNX_DP(opaque);
 712
 713    DPRINTF("core write @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset, value);
 714
 715    offset = offset >> 2;
 716
 717    switch (offset) {
 718    /*
 719     * Only special write case are handled.
 720     */
 721    case DP_LINK_BW_SET:
 722        s->core_registers[offset] = value & 0x000000FF;
 723        break;
 724    case DP_LANE_COUNT_SET:
 725    case DP_MAIN_STREAM_MISC0:
 726        s->core_registers[offset] = value & 0x0000000F;
 727        break;
 728    case DP_TRAINING_PATTERN_SET:
 729    case DP_LINK_QUAL_PATTERN_SET:
 730    case DP_MAIN_STREAM_POLARITY:
 731    case DP_PHY_VOLTAGE_DIFF_LANE_0:
 732    case DP_PHY_VOLTAGE_DIFF_LANE_1:
 733        s->core_registers[offset] = value & 0x00000003;
 734        break;
 735    case DP_ENHANCED_FRAME_EN:
 736    case DP_SCRAMBLING_DISABLE:
 737    case DP_DOWNSPREAD_CTRL:
 738    case DP_MAIN_STREAM_ENABLE:
 739    case DP_TRANSMIT_PRBS7:
 740        s->core_registers[offset] = value & 0x00000001;
 741        break;
 742    case DP_PHY_CLOCK_SELECT:
 743        s->core_registers[offset] = value & 0x00000007;
 744        break;
 745    case DP_SOFTWARE_RESET:
 746        /*
 747         * No need to update this bit as it's read '0'.
 748         */
 749        /*
 750         * TODO: reset IP.
 751         */
 752        break;
 753    case DP_TRANSMITTER_ENABLE:
 754        s->core_registers[offset] = value & 0x01;
 755        break;
 756    case DP_FORCE_SCRAMBLER_RESET:
 757        /*
 758         * No need to update this bit as it's read '0'.
 759         */
 760        /*
 761         * TODO: force a scrambler reset??
 762         */
 763        break;
 764    case DP_AUX_COMMAND_REGISTER:
 765        s->core_registers[offset] = value & 0x00001F0F;
 766        xlnx_dp_aux_set_command(s, s->core_registers[offset]);
 767        break;
 768    case DP_MAIN_STREAM_HTOTAL:
 769    case DP_MAIN_STREAM_VTOTAL:
 770    case DP_MAIN_STREAM_HSTART:
 771    case DP_MAIN_STREAM_VSTART:
 772        s->core_registers[offset] = value & 0x0000FFFF;
 773        break;
 774    case DP_MAIN_STREAM_HRES:
 775    case DP_MAIN_STREAM_VRES:
 776        s->core_registers[offset] = value & 0x0000FFFF;
 777        xlnx_dp_recreate_surface(s);
 778        break;
 779    case DP_MAIN_STREAM_HSWIDTH:
 780    case DP_MAIN_STREAM_VSWIDTH:
 781        s->core_registers[offset] = value & 0x00007FFF;
 782        break;
 783    case DP_MAIN_STREAM_MISC1:
 784        s->core_registers[offset] = value & 0x00000086;
 785        break;
 786    case DP_MAIN_STREAM_M_VID:
 787    case DP_MAIN_STREAM_N_VID:
 788        s->core_registers[offset] = value & 0x00FFFFFF;
 789        break;
 790    case DP_MSA_TRANSFER_UNIT_SIZE:
 791    case DP_MIN_BYTES_PER_TU:
 792    case DP_INIT_WAIT:
 793        s->core_registers[offset] = value & 0x00000007;
 794        break;
 795    case DP_USER_DATA_COUNT_PER_LANE:
 796        s->core_registers[offset] = value & 0x0003FFFF;
 797        break;
 798    case DP_FRAC_BYTES_PER_TU:
 799        s->core_registers[offset] = value & 0x000003FF;
 800        break;
 801    case DP_PHY_RESET:
 802        s->core_registers[offset] = value & 0x00010003;
 803        /*
 804         * TODO: Reset something?
 805         */
 806        break;
 807    case DP_TX_PHY_POWER_DOWN:
 808        s->core_registers[offset] = value & 0x0000000F;
 809        /*
 810         * TODO: Power down things?
 811         */
 812        break;
 813    case DP_AUX_WRITE_FIFO: {
 814        uint8_t c = value;
 815        xlnx_dp_aux_push_tx_fifo(s, &c, 1);
 816        break;
 817    }
 818    case DP_AUX_CLOCK_DIVIDER:
 819        break;
 820    case DP_AUX_REPLY_COUNT:
 821        /*
 822         * Writing to this register clear the counter.
 823         */
 824        s->core_registers[offset] = 0x00000000;
 825        break;
 826    case DP_AUX_ADDRESS:
 827        s->core_registers[offset] = value & 0x000FFFFF;
 828        break;
 829    case DP_VERSION_REGISTER:
 830    case DP_CORE_ID:
 831    case DP_TX_USER_FIFO_OVERFLOW:
 832    case DP_AUX_REPLY_DATA:
 833    case DP_AUX_REPLY_CODE:
 834    case DP_REPLY_DATA_COUNT:
 835    case DP_REPLY_STATUS:
 836    case DP_HPD_DURATION:
 837        /*
 838         * Write to read only location..
 839         */
 840        break;
 841    case DP_TX_AUDIO_CONTROL:
 842        s->core_registers[offset] = value & 0x00000001;
 843        xlnx_dp_audio_activate(s);
 844        break;
 845    case DP_TX_AUDIO_CHANNELS:
 846        s->core_registers[offset] = value & 0x00000007;
 847        xlnx_dp_audio_activate(s);
 848        break;
 849    case DP_INT_STATUS:
 850        s->core_registers[DP_INT_STATUS] &= ~value;
 851        xlnx_dp_update_irq(s);
 852        break;
 853    case DP_INT_EN:
 854        s->core_registers[DP_INT_MASK] &= ~value;
 855        xlnx_dp_update_irq(s);
 856        break;
 857    case DP_INT_DS:
 858        s->core_registers[DP_INT_MASK] |= ~value;
 859        xlnx_dp_update_irq(s);
 860        break;
 861    default:
 862        assert(offset <= (0x504C >> 2));
 863        s->core_registers[offset] = value;
 864        break;
 865    }
 866}
 867
 868static const MemoryRegionOps dp_ops = {
 869    .read = xlnx_dp_read,
 870    .write = xlnx_dp_write,
 871    .endianness = DEVICE_NATIVE_ENDIAN,
 872    .valid = {
 873        .min_access_size = 4,
 874        .max_access_size = 4,
 875    },
 876    .impl = {
 877        .min_access_size = 4,
 878        .max_access_size = 4,
 879    },
 880};
 881
 882/*
 883 * This is to handle Read/Write to the Video Blender.
 884 */
 885static void xlnx_dp_vblend_write(void *opaque, hwaddr offset,
 886                                 uint64_t value, unsigned size)
 887{
 888    XlnxDPState *s = XLNX_DP(opaque);
 889    bool alpha_was_enabled;
 890
 891    DPRINTF("vblend: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
 892                                                               (uint32_t)value);
 893    offset = offset >> 2;
 894
 895    switch (offset) {
 896    case V_BLEND_BG_CLR_0:
 897    case V_BLEND_BG_CLR_1:
 898    case V_BLEND_BG_CLR_2:
 899        s->vblend_registers[offset] = value & 0x00000FFF;
 900        break;
 901    case V_BLEND_SET_GLOBAL_ALPHA_REG:
 902        /*
 903         * A write to this register can enable or disable blending. Thus we need
 904         * to recreate the surfaces.
 905         */
 906        alpha_was_enabled = xlnx_dp_global_alpha_enabled(s);
 907        s->vblend_registers[offset] = value & 0x000001FF;
 908        if (xlnx_dp_global_alpha_enabled(s) != alpha_was_enabled) {
 909            xlnx_dp_recreate_surface(s);
 910        }
 911        break;
 912    case V_BLEND_OUTPUT_VID_FORMAT:
 913        s->vblend_registers[offset] = value & 0x00000017;
 914        break;
 915    case V_BLEND_LAYER0_CONTROL:
 916    case V_BLEND_LAYER1_CONTROL:
 917        s->vblend_registers[offset] = value & 0x00000103;
 918        break;
 919    case V_BLEND_RGB2YCBCR_COEFF(0):
 920    case V_BLEND_RGB2YCBCR_COEFF(1):
 921    case V_BLEND_RGB2YCBCR_COEFF(2):
 922    case V_BLEND_RGB2YCBCR_COEFF(3):
 923    case V_BLEND_RGB2YCBCR_COEFF(4):
 924    case V_BLEND_RGB2YCBCR_COEFF(5):
 925    case V_BLEND_RGB2YCBCR_COEFF(6):
 926    case V_BLEND_RGB2YCBCR_COEFF(7):
 927    case V_BLEND_RGB2YCBCR_COEFF(8):
 928    case V_BLEND_IN1CSC_COEFF(0):
 929    case V_BLEND_IN1CSC_COEFF(1):
 930    case V_BLEND_IN1CSC_COEFF(2):
 931    case V_BLEND_IN1CSC_COEFF(3):
 932    case V_BLEND_IN1CSC_COEFF(4):
 933    case V_BLEND_IN1CSC_COEFF(5):
 934    case V_BLEND_IN1CSC_COEFF(6):
 935    case V_BLEND_IN1CSC_COEFF(7):
 936    case V_BLEND_IN1CSC_COEFF(8):
 937    case V_BLEND_IN2CSC_COEFF(0):
 938    case V_BLEND_IN2CSC_COEFF(1):
 939    case V_BLEND_IN2CSC_COEFF(2):
 940    case V_BLEND_IN2CSC_COEFF(3):
 941    case V_BLEND_IN2CSC_COEFF(4):
 942    case V_BLEND_IN2CSC_COEFF(5):
 943    case V_BLEND_IN2CSC_COEFF(6):
 944    case V_BLEND_IN2CSC_COEFF(7):
 945    case V_BLEND_IN2CSC_COEFF(8):
 946        s->vblend_registers[offset] = value & 0x0000FFFF;
 947        break;
 948    case V_BLEND_LUMA_IN1CSC_OFFSET:
 949    case V_BLEND_CR_IN1CSC_OFFSET:
 950    case V_BLEND_CB_IN1CSC_OFFSET:
 951    case V_BLEND_LUMA_IN2CSC_OFFSET:
 952    case V_BLEND_CR_IN2CSC_OFFSET:
 953    case V_BLEND_CB_IN2CSC_OFFSET:
 954    case V_BLEND_LUMA_OUTCSC_OFFSET:
 955    case V_BLEND_CR_OUTCSC_OFFSET:
 956    case V_BLEND_CB_OUTCSC_OFFSET:
 957        s->vblend_registers[offset] = value & 0x3FFF7FFF;
 958        break;
 959    case V_BLEND_CHROMA_KEY_ENABLE:
 960        s->vblend_registers[offset] = value & 0x00000003;
 961        break;
 962    case V_BLEND_CHROMA_KEY_COMP1:
 963    case V_BLEND_CHROMA_KEY_COMP2:
 964    case V_BLEND_CHROMA_KEY_COMP3:
 965        s->vblend_registers[offset] = value & 0x0FFF0FFF;
 966        break;
 967    default:
 968        s->vblend_registers[offset] = value;
 969        break;
 970    }
 971}
 972
 973static uint64_t xlnx_dp_vblend_read(void *opaque, hwaddr offset,
 974                                    unsigned size)
 975{
 976    XlnxDPState *s = XLNX_DP(opaque);
 977
 978    DPRINTF("vblend: read @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
 979            s->vblend_registers[offset >> 2]);
 980    return s->vblend_registers[offset >> 2];
 981}
 982
 983static const MemoryRegionOps vblend_ops = {
 984    .read = xlnx_dp_vblend_read,
 985    .write = xlnx_dp_vblend_write,
 986    .endianness = DEVICE_NATIVE_ENDIAN,
 987    .valid = {
 988        .min_access_size = 4,
 989        .max_access_size = 4,
 990    },
 991    .impl = {
 992        .min_access_size = 4,
 993        .max_access_size = 4,
 994    },
 995};
 996
 997/*
 998 * This is to handle Read/Write to the Audio Video buffer manager.
 999 */
1000static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value,
1001                                 unsigned size)
1002{
1003    XlnxDPState *s = XLNX_DP(opaque);
1004
1005    DPRINTF("avbufm: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
1006                                                               (uint32_t)value);
1007    offset = offset >> 2;
1008
1009    switch (offset) {
1010    case AV_BUF_FORMAT:
1011        s->avbufm_registers[offset] = value & 0x00000FFF;
1012        xlnx_dp_change_graphic_fmt(s);
1013        break;
1014    case AV_CHBUF0:
1015    case AV_CHBUF1:
1016    case AV_CHBUF2:
1017    case AV_CHBUF3:
1018    case AV_CHBUF4:
1019    case AV_CHBUF5:
1020        s->avbufm_registers[offset] = value & 0x0000007F;
1021        break;
1022    case AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT:
1023        s->avbufm_registers[offset] = value & 0x0000007F;
1024        break;
1025    case AV_BUF_DITHER_CONFIG:
1026        s->avbufm_registers[offset] = value & 0x000007FF;
1027        break;
1028    case AV_BUF_DITHER_CONFIG_MAX:
1029    case AV_BUF_DITHER_CONFIG_MIN:
1030        s->avbufm_registers[offset] = value & 0x00000FFF;
1031        break;
1032    case AV_BUF_PATTERN_GEN_SELECT:
1033        s->avbufm_registers[offset] = value & 0xFFFFFF03;
1034        break;
1035    case AV_BUF_AUD_VID_CLK_SOURCE:
1036        s->avbufm_registers[offset] = value & 0x00000007;
1037        break;
1038    case AV_BUF_SRST_REG:
1039        s->avbufm_registers[offset] = value & 0x00000002;
1040        break;
1041    case AV_BUF_AUDIO_CH_CONFIG:
1042        s->avbufm_registers[offset] = value & 0x00000003;
1043        break;
1044    case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0):
1045    case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1):
1046    case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2):
1047    case AV_BUF_VIDEO_COMP_SCALE_FACTOR(0):
1048    case AV_BUF_VIDEO_COMP_SCALE_FACTOR(1):
1049    case AV_BUF_VIDEO_COMP_SCALE_FACTOR(2):
1050        s->avbufm_registers[offset] = value & 0x0000FFFF;
1051        break;
1052    case AV_BUF_LIVE_VIDEO_COMP_SF(0):
1053    case AV_BUF_LIVE_VIDEO_COMP_SF(1):
1054    case AV_BUF_LIVE_VIDEO_COMP_SF(2):
1055    case AV_BUF_LIVE_VID_CONFIG:
1056    case AV_BUF_LIVE_GFX_COMP_SF(0):
1057    case AV_BUF_LIVE_GFX_COMP_SF(1):
1058    case AV_BUF_LIVE_GFX_COMP_SF(2):
1059    case AV_BUF_LIVE_GFX_CONFIG:
1060    case AV_BUF_NON_LIVE_LATENCY:
1061    case AV_BUF_STC_CONTROL:
1062    case AV_BUF_STC_INIT_VALUE0:
1063    case AV_BUF_STC_INIT_VALUE1:
1064    case AV_BUF_STC_ADJ:
1065    case AV_BUF_STC_VIDEO_VSYNC_TS_REG0:
1066    case AV_BUF_STC_VIDEO_VSYNC_TS_REG1:
1067    case AV_BUF_STC_EXT_VSYNC_TS_REG0:
1068    case AV_BUF_STC_EXT_VSYNC_TS_REG1:
1069    case AV_BUF_STC_CUSTOM_EVENT_TS_REG0:
1070    case AV_BUF_STC_CUSTOM_EVENT_TS_REG1:
1071    case AV_BUF_STC_CUSTOM_EVENT2_TS_REG0:
1072    case AV_BUF_STC_CUSTOM_EVENT2_TS_REG1:
1073    case AV_BUF_STC_SNAPSHOT0:
1074    case AV_BUF_STC_SNAPSHOT1:
1075    case AV_BUF_HCOUNT_VCOUNT_INT0:
1076    case AV_BUF_HCOUNT_VCOUNT_INT1:
1077        qemu_log_mask(LOG_UNIMP, "avbufm: unimplemented register 0x%04"
1078                                 PRIx64 "\n",
1079                      offset << 2);
1080        break;
1081    default:
1082        s->avbufm_registers[offset] = value;
1083        break;
1084    }
1085}
1086
1087static uint64_t xlnx_dp_avbufm_read(void *opaque, hwaddr offset,
1088                                    unsigned size)
1089{
1090    XlnxDPState *s = XLNX_DP(opaque);
1091
1092    offset = offset >> 2;
1093    return s->avbufm_registers[offset];
1094}
1095
1096static const MemoryRegionOps avbufm_ops = {
1097    .read = xlnx_dp_avbufm_read,
1098    .write = xlnx_dp_avbufm_write,
1099    .endianness = DEVICE_NATIVE_ENDIAN,
1100    .valid = {
1101        .min_access_size = 4,
1102        .max_access_size = 4,
1103    },
1104    .impl = {
1105        .min_access_size = 4,
1106        .max_access_size = 4,
1107    },
1108};
1109
1110/*
1111 * This is a global alpha blending using pixman.
1112 * Both graphic and video planes are multiplied with the global alpha
1113 * coefficient and added.
1114 */
1115static inline void xlnx_dp_blend_surface(XlnxDPState *s)
1116{
1117    pixman_fixed_t alpha1[] = { pixman_double_to_fixed(1),
1118                                pixman_double_to_fixed(1),
1119                                pixman_double_to_fixed(1.0) };
1120    pixman_fixed_t alpha2[] = { pixman_double_to_fixed(1),
1121                                pixman_double_to_fixed(1),
1122                                pixman_double_to_fixed(1.0) };
1123
1124    if ((surface_width(s->g_plane.surface)
1125         != surface_width(s->v_plane.surface)) ||
1126        (surface_height(s->g_plane.surface)
1127         != surface_height(s->v_plane.surface))) {
1128        return;
1129    }
1130
1131    alpha1[2] = pixman_double_to_fixed((double)(xlnx_dp_global_alpha_value(s))
1132                                       / 256.0);
1133    alpha2[2] = pixman_double_to_fixed((255.0
1134                                    - (double)xlnx_dp_global_alpha_value(s))
1135                                       / 256.0);
1136
1137    pixman_image_set_filter(s->g_plane.surface->image,
1138                            PIXMAN_FILTER_CONVOLUTION, alpha1, 3);
1139    pixman_image_composite(PIXMAN_OP_SRC, s->g_plane.surface->image, 0,
1140                           s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1141                           surface_width(s->g_plane.surface),
1142                           surface_height(s->g_plane.surface));
1143    pixman_image_set_filter(s->v_plane.surface->image,
1144                            PIXMAN_FILTER_CONVOLUTION, alpha2, 3);
1145    pixman_image_composite(PIXMAN_OP_ADD, s->v_plane.surface->image, 0,
1146                           s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1147                           surface_width(s->g_plane.surface),
1148                           surface_height(s->g_plane.surface));
1149}
1150
1151static void xlnx_dp_update_display(void *opaque)
1152{
1153    XlnxDPState *s = XLNX_DP(opaque);
1154
1155    if ((s->core_registers[DP_TRANSMITTER_ENABLE] & 0x01) == 0) {
1156        return;
1157    }
1158
1159    s->core_registers[DP_INT_STATUS] |= (1 << 13);
1160    xlnx_dp_update_irq(s);
1161
1162    xlnx_dpdma_trigger_vsync_irq(s->dpdma);
1163
1164    /*
1165     * Trigger the DMA channel.
1166     */
1167    if (!xlnx_dpdma_start_operation(s->dpdma, 3, false)) {
1168        /*
1169         * An error occurred don't do anything with the data..
1170         * Trigger an underflow interrupt.
1171         */
1172        s->core_registers[DP_INT_STATUS] |= (1 << 21);
1173        xlnx_dp_update_irq(s);
1174        return;
1175    }
1176
1177    if (xlnx_dp_global_alpha_enabled(s)) {
1178        if (!xlnx_dpdma_start_operation(s->dpdma, 0, false)) {
1179            s->core_registers[DP_INT_STATUS] |= (1 << 21);
1180            xlnx_dp_update_irq(s);
1181            return;
1182        }
1183        xlnx_dp_blend_surface(s);
1184    }
1185
1186    /*
1187     * XXX: We might want to update only what changed.
1188     */
1189    dpy_gfx_update(s->console, 0, 0, surface_width(s->g_plane.surface),
1190                                     surface_height(s->g_plane.surface));
1191}
1192
1193static const GraphicHwOps xlnx_dp_gfx_ops = {
1194    .gfx_update  = xlnx_dp_update_display,
1195};
1196
1197static void xlnx_dp_init(Object *obj)
1198{
1199    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1200    XlnxDPState *s = XLNX_DP(obj);
1201
1202    memory_region_init(&s->container, obj, TYPE_XLNX_DP, 0xC050);
1203
1204    memory_region_init_io(&s->core_iomem, obj, &dp_ops, s, TYPE_XLNX_DP
1205                          ".core", 0x3AF);
1206    memory_region_add_subregion(&s->container, 0x0000, &s->core_iomem);
1207
1208    memory_region_init_io(&s->vblend_iomem, obj, &vblend_ops, s, TYPE_XLNX_DP
1209                          ".v_blend", 0x1DF);
1210    memory_region_add_subregion(&s->container, 0xA000, &s->vblend_iomem);
1211
1212    memory_region_init_io(&s->avbufm_iomem, obj, &avbufm_ops, s, TYPE_XLNX_DP
1213                          ".av_buffer_manager", 0x238);
1214    memory_region_add_subregion(&s->container, 0xB000, &s->avbufm_iomem);
1215
1216    memory_region_init_io(&s->audio_iomem, obj, &audio_ops, s, TYPE_XLNX_DP
1217                          ".audio", sizeof(s->audio_registers));
1218    memory_region_add_subregion(&s->container, 0xC000, &s->audio_iomem);
1219
1220    sysbus_init_mmio(sbd, &s->container);
1221    sysbus_init_irq(sbd, &s->irq);
1222
1223    object_property_add_link(obj, "dpdma", TYPE_XLNX_DPDMA,
1224                             (Object **) &s->dpdma,
1225                             xlnx_dp_set_dpdma,
1226                             OBJ_PROP_LINK_STRONG,
1227                             &error_abort);
1228
1229    /*
1230     * Initialize AUX Bus.
1231     */
1232    s->aux_bus = aux_init_bus(DEVICE(obj), "aux");
1233
1234    /*
1235     * Initialize DPCD and EDID..
1236     */
1237    s->dpcd = DPCD(aux_create_slave(s->aux_bus, "dpcd"));
1238    object_property_add_child(OBJECT(s), "dpcd", OBJECT(s->dpcd), NULL);
1239
1240    s->edid = I2CDDC(qdev_create(BUS(aux_get_i2c_bus(s->aux_bus)), "i2c-ddc"));
1241    i2c_set_slave_address(I2C_SLAVE(s->edid), 0x50);
1242    object_property_add_child(OBJECT(s), "edid", OBJECT(s->edid), NULL);
1243
1244    fifo8_create(&s->rx_fifo, 16);
1245    fifo8_create(&s->tx_fifo, 16);
1246}
1247
1248static void xlnx_dp_realize(DeviceState *dev, Error **errp)
1249{
1250    XlnxDPState *s = XLNX_DP(dev);
1251    DisplaySurface *surface;
1252    struct audsettings as;
1253
1254    qdev_init_nofail(DEVICE(s->dpcd));
1255    aux_map_slave(AUX_SLAVE(s->dpcd), 0x0000);
1256
1257    s->console = graphic_console_init(dev, 0, &xlnx_dp_gfx_ops, s);
1258    surface = qemu_console_surface(s->console);
1259    xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
1260                                      surface_data(surface));
1261
1262    as.freq = 44100;
1263    as.nchannels = 2;
1264    as.fmt = AUD_FMT_S16;
1265    as.endianness = 0;
1266
1267    AUD_register_card("xlnx_dp.audio", &s->aud_card);
1268
1269    s->amixer_output_stream = AUD_open_out(&s->aud_card,
1270                                           s->amixer_output_stream,
1271                                           "xlnx_dp.audio.out",
1272                                           s,
1273                                           xlnx_dp_audio_callback,
1274                                           &as);
1275    AUD_set_volume_out(s->amixer_output_stream, 0, 255, 255);
1276    xlnx_dp_audio_activate(s);
1277}
1278
1279static void xlnx_dp_reset(DeviceState *dev)
1280{
1281    XlnxDPState *s = XLNX_DP(dev);
1282
1283    memset(s->core_registers, 0, sizeof(s->core_registers));
1284    s->core_registers[DP_VERSION_REGISTER] = 0x04010000;
1285    s->core_registers[DP_CORE_ID] = 0x01020000;
1286    s->core_registers[DP_REPLY_STATUS] = 0x00000010;
1287    s->core_registers[DP_MSA_TRANSFER_UNIT_SIZE] = 0x00000040;
1288    s->core_registers[DP_INIT_WAIT] = 0x00000020;
1289    s->core_registers[DP_PHY_RESET] = 0x00010003;
1290    s->core_registers[DP_INT_MASK] = 0xFFFFF03F;
1291    s->core_registers[DP_PHY_STATUS] = 0x00000043;
1292    s->core_registers[DP_INTERRUPT_SIGNAL_STATE] = 0x00000001;
1293
1294    s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(0)] = 0x00001000;
1295    s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(4)] = 0x00001000;
1296    s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(8)] = 0x00001000;
1297    s->vblend_registers[V_BLEND_IN1CSC_COEFF(0)] = 0x00001000;
1298    s->vblend_registers[V_BLEND_IN1CSC_COEFF(4)] = 0x00001000;
1299    s->vblend_registers[V_BLEND_IN1CSC_COEFF(8)] = 0x00001000;
1300    s->vblend_registers[V_BLEND_IN2CSC_COEFF(0)] = 0x00001000;
1301    s->vblend_registers[V_BLEND_IN2CSC_COEFF(4)] = 0x00001000;
1302    s->vblend_registers[V_BLEND_IN2CSC_COEFF(8)] = 0x00001000;
1303
1304    s->avbufm_registers[AV_BUF_NON_LIVE_LATENCY] = 0x00000180;
1305    s->avbufm_registers[AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT] = 0x00000008;
1306    s->avbufm_registers[AV_BUF_DITHER_CONFIG_MAX] = 0x00000FFF;
1307    s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0)] = 0x00010101;
1308    s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1)] = 0x00010101;
1309    s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2)] = 0x00010101;
1310    s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(0)] = 0x00010101;
1311    s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(1)] = 0x00010101;
1312    s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(2)] = 0x00010101;
1313    s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(0)] = 0x00010101;
1314    s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(1)] = 0x00010101;
1315    s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(2)] = 0x00010101;
1316    s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(0)] = 0x00010101;
1317    s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(1)] = 0x00010101;
1318    s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(2)] = 0x00010101;
1319
1320    memset(s->audio_registers, 0, sizeof(s->audio_registers));
1321    s->byte_left = 0;
1322
1323    xlnx_dp_aux_clear_rx_fifo(s);
1324    xlnx_dp_change_graphic_fmt(s);
1325    xlnx_dp_update_irq(s);
1326}
1327
1328static void xlnx_dp_class_init(ObjectClass *oc, void *data)
1329{
1330    DeviceClass *dc = DEVICE_CLASS(oc);
1331
1332    dc->realize = xlnx_dp_realize;
1333    dc->vmsd = &vmstate_dp;
1334    dc->reset = xlnx_dp_reset;
1335}
1336
1337static const TypeInfo xlnx_dp_info = {
1338    .name          = TYPE_XLNX_DP,
1339    .parent        = TYPE_SYS_BUS_DEVICE,
1340    .instance_size = sizeof(XlnxDPState),
1341    .instance_init = xlnx_dp_init,
1342    .class_init    = xlnx_dp_class_init,
1343};
1344
1345static void xlnx_dp_register_types(void)
1346{
1347    type_register_static(&xlnx_dp_info);
1348}
1349
1350type_init(xlnx_dp_register_types)
1351