1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2/* 3 * Copyright (c) 1999-2002 Vojtech Pavlik 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 as published by 7 * the Free Software Foundation. 8 */ 9#ifndef _INPUT_H 10#define _INPUT_H 11 12 13#include <sys/time.h> 14#include <sys/types.h> 15#include "standard-headers/linux/types.h" 16 17#include "standard-headers/linux/input-event-codes.h" 18 19/* 20 * The event structure itself 21 * Note that __USE_TIME_BITS64 is defined by libc based on 22 * application's request to use 64 bit time_t. 23 */ 24 25struct input_event { 26#if (HOST_LONG_BITS != 32 || !defined(__USE_TIME_BITS64)) && !defined(__KERNEL) 27 struct timeval time; 28#define input_event_sec time.tv_sec 29#define input_event_usec time.tv_usec 30#else 31 unsigned long __sec; 32 unsigned long __usec; 33#define input_event_sec __sec 34#define input_event_usec __usec 35#endif 36 uint16_t type; 37 uint16_t code; 38 int32_t value; 39}; 40 41/* 42 * Protocol version. 43 */ 44 45#define EV_VERSION 0x010001 46 47/* 48 * IOCTLs (0x00 - 0x7f) 49 */ 50 51struct input_id { 52 uint16_t bustype; 53 uint16_t vendor; 54 uint16_t product; 55 uint16_t version; 56}; 57 58/** 59 * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls 60 * @value: latest reported value for the axis. 61 * @minimum: specifies minimum value for the axis. 62 * @maximum: specifies maximum value for the axis. 63 * @fuzz: specifies fuzz value that is used to filter noise from 64 * the event stream. 65 * @flat: values that are within this value will be discarded by 66 * joydev interface and reported as 0 instead. 67 * @resolution: specifies resolution for the values reported for 68 * the axis. 69 * 70 * Note that input core does not clamp reported values to the 71 * [minimum, maximum] limits, such task is left to userspace. 72 * 73 * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z) 74 * is reported in units per millimeter (units/mm), resolution 75 * for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported 76 * in units per radian. 77 * When INPUT_PROP_ACCELEROMETER is set the resolution changes. 78 * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in 79 * in units per g (units/g) and in units per degree per second 80 * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ). 81 */ 82struct input_absinfo { 83 int32_t value; 84 int32_t minimum; 85 int32_t maximum; 86 int32_t fuzz; 87 int32_t flat; 88 int32_t resolution; 89}; 90 91/** 92 * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls 93 * @scancode: scancode represented in machine-endian form. 94 * @len: length of the scancode that resides in @scancode buffer. 95 * @index: index in the keymap, may be used instead of scancode 96 * @flags: allows to specify how kernel should handle the request. For 97 * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel 98 * should perform lookup in keymap by @index instead of @scancode 99 * @keycode: key code assigned to this scancode 100 * 101 * The structure is used to retrieve and modify keymap data. Users have 102 * option of performing lookup either by @scancode itself or by @index 103 * in keymap entry. EVIOCGKEYCODE will also return scancode or index 104 * (depending on which element was used to perform lookup). 105 */ 106struct input_keymap_entry { 107#define INPUT_KEYMAP_BY_INDEX (1 << 0) 108 uint8_t flags; 109 uint8_t len; 110 uint16_t index; 111 uint32_t keycode; 112 uint8_t scancode[32]; 113}; 114 115struct input_mask { 116 uint32_t type; 117 uint32_t codes_size; 118 uint64_t codes_ptr; 119}; 120 121#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ 122#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ 123#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ 124#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ 125 126#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ 127#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) 128#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ 129#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) 130 131#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ 132#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ 133#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ 134#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ 135 136/** 137 * EVIOCGMTSLOTS(len) - get MT slot values 138 * @len: size of the data buffer in bytes 139 * 140 * The ioctl buffer argument should be binary equivalent to 141 * 142 * struct input_mt_request_layout { 143 * uint32_t code; 144 * int32_t values[num_slots]; 145 * }; 146 * 147 * where num_slots is the (arbitrary) number of MT slots to extract. 148 * 149 * The ioctl size argument (len) is the size of the buffer, which 150 * should satisfy len = (num_slots + 1) * sizeof(int32_t). If len is 151 * too small to fit all available slots, the first num_slots are 152 * returned. 153 * 154 * Before the call, code is set to the wanted ABS_MT event type. On 155 * return, values[] is filled with the slot values for the specified 156 * ABS_MT code. 157 * 158 * If the request code is not an ABS_MT value, -EINVAL is returned. 159 */ 160#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) 161 162#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ 163#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ 164#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ 165#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ 166 167#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ 168#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ 169#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ 170 171#define EVIOCSFF _IOW('E', 0x80, struct ff_effect) /* send a force effect to a force feedback device */ 172#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ 173#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ 174 175#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ 176#define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */ 177 178/** 179 * EVIOCGMASK - Retrieve current event mask 180 * 181 * This ioctl allows user to retrieve the current event mask for specific 182 * event type. The argument must be of type "struct input_mask" and 183 * specifies the event type to query, the address of the receive buffer and 184 * the size of the receive buffer. 185 * 186 * The event mask is a per-client mask that specifies which events are 187 * forwarded to the client. Each event code is represented by a single bit 188 * in the event mask. If the bit is set, the event is passed to the client 189 * normally. Otherwise, the event is filtered and will never be queued on 190 * the client's receive buffer. 191 * 192 * Event masks do not affect global state of the input device. They only 193 * affect the file descriptor they are applied to. 194 * 195 * The default event mask for a client has all bits set, i.e. all events 196 * are forwarded to the client. If the kernel is queried for an unknown 197 * event type or if the receive buffer is larger than the number of 198 * event codes known to the kernel, the kernel returns all zeroes for those 199 * codes. 200 * 201 * At maximum, codes_size bytes are copied. 202 * 203 * This ioctl may fail with ENODEV in case the file is revoked, EFAULT 204 * if the receive-buffer points to invalid memory, or EINVAL if the kernel 205 * does not implement the ioctl. 206 */ 207#define EVIOCGMASK _IOR('E', 0x92, struct input_mask) /* Get event-masks */ 208 209/** 210 * EVIOCSMASK - Set event mask 211 * 212 * This ioctl is the counterpart to EVIOCGMASK. Instead of receiving the 213 * current event mask, this changes the client's event mask for a specific 214 * type. See EVIOCGMASK for a description of event-masks and the 215 * argument-type. 216 * 217 * This ioctl provides full forward compatibility. If the passed event type 218 * is unknown to the kernel, or if the number of event codes specified in 219 * the mask is bigger than what is known to the kernel, the ioctl is still 220 * accepted and applied. However, any unknown codes are left untouched and 221 * stay cleared. That means, the kernel always filters unknown codes 222 * regardless of what the client requests. If the new mask doesn't cover 223 * all known event-codes, all remaining codes are automatically cleared and 224 * thus filtered. 225 * 226 * This ioctl may fail with ENODEV in case the file is revoked. EFAULT is 227 * returned if the receive-buffer points to invalid memory. EINVAL is returned 228 * if the kernel does not implement the ioctl. 229 */ 230#define EVIOCSMASK _IOW('E', 0x93, struct input_mask) /* Set event-masks */ 231 232#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ 233 234/* 235 * IDs. 236 */ 237 238#define ID_BUS 0 239#define ID_VENDOR 1 240#define ID_PRODUCT 2 241#define ID_VERSION 3 242 243#define BUS_PCI 0x01 244#define BUS_ISAPNP 0x02 245#define BUS_USB 0x03 246#define BUS_HIL 0x04 247#define BUS_BLUETOOTH 0x05 248#define BUS_VIRTUAL 0x06 249 250#define BUS_ISA 0x10 251#define BUS_I8042 0x11 252#define BUS_XTKBD 0x12 253#define BUS_RS232 0x13 254#define BUS_GAMEPORT 0x14 255#define BUS_PARPORT 0x15 256#define BUS_AMIGA 0x16 257#define BUS_ADB 0x17 258#define BUS_I2C 0x18 259#define BUS_HOST 0x19 260#define BUS_GSC 0x1A 261#define BUS_ATARI 0x1B 262#define BUS_SPI 0x1C 263#define BUS_RMI 0x1D 264#define BUS_CEC 0x1E 265#define BUS_INTEL_ISHTP 0x1F 266 267/* 268 * MT_TOOL types 269 */ 270#define MT_TOOL_FINGER 0x00 271#define MT_TOOL_PEN 0x01 272#define MT_TOOL_PALM 0x02 273#define MT_TOOL_DIAL 0x0a 274#define MT_TOOL_MAX 0x0f 275 276/* 277 * Values describing the status of a force-feedback effect 278 */ 279#define FF_STATUS_STOPPED 0x00 280#define FF_STATUS_PLAYING 0x01 281#define FF_STATUS_MAX 0x01 282 283/* 284 * Structures used in ioctls to upload effects to a device 285 * They are pieces of a bigger structure (called ff_effect) 286 */ 287 288/* 289 * All duration values are expressed in ms. Values above 32767 ms (0x7fff) 290 * should not be used and have unspecified results. 291 */ 292 293/** 294 * struct ff_replay - defines scheduling of the force-feedback effect 295 * @length: duration of the effect 296 * @delay: delay before effect should start playing 297 */ 298struct ff_replay { 299 uint16_t length; 300 uint16_t delay; 301}; 302 303/** 304 * struct ff_trigger - defines what triggers the force-feedback effect 305 * @button: number of the button triggering the effect 306 * @interval: controls how soon the effect can be re-triggered 307 */ 308struct ff_trigger { 309 uint16_t button; 310 uint16_t interval; 311}; 312 313/** 314 * struct ff_envelope - generic force-feedback effect envelope 315 * @attack_length: duration of the attack (ms) 316 * @attack_level: level at the beginning of the attack 317 * @fade_length: duration of fade (ms) 318 * @fade_level: level at the end of fade 319 * 320 * The @attack_level and @fade_level are absolute values; when applying 321 * envelope force-feedback core will convert to positive/negative 322 * value based on polarity of the default level of the effect. 323 * Valid range for the attack and fade levels is 0x0000 - 0x7fff 324 */ 325struct ff_envelope { 326 uint16_t attack_length; 327 uint16_t attack_level; 328 uint16_t fade_length; 329 uint16_t fade_level; 330}; 331 332/** 333 * struct ff_constant_effect - defines parameters of a constant force-feedback effect 334 * @level: strength of the effect; may be negative 335 * @envelope: envelope data 336 */ 337struct ff_constant_effect { 338 int16_t level; 339 struct ff_envelope envelope; 340}; 341 342/** 343 * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect 344 * @start_level: beginning strength of the effect; may be negative 345 * @end_level: final strength of the effect; may be negative 346 * @envelope: envelope data 347 */ 348struct ff_ramp_effect { 349 int16_t start_level; 350 int16_t end_level; 351 struct ff_envelope envelope; 352}; 353 354/** 355 * struct ff_condition_effect - defines a spring or friction force-feedback effect 356 * @right_saturation: maximum level when joystick moved all way to the right 357 * @left_saturation: same for the left side 358 * @right_coeff: controls how fast the force grows when the joystick moves 359 * to the right 360 * @left_coeff: same for the left side 361 * @deadband: size of the dead zone, where no force is produced 362 * @center: position of the dead zone 363 */ 364struct ff_condition_effect { 365 uint16_t right_saturation; 366 uint16_t left_saturation; 367 368 int16_t right_coeff; 369 int16_t left_coeff; 370 371 uint16_t deadband; 372 int16_t center; 373}; 374 375/** 376 * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect 377 * @waveform: kind of the effect (wave) 378 * @period: period of the wave (ms) 379 * @magnitude: peak value 380 * @offset: mean value of the wave (roughly) 381 * @phase: 'horizontal' shift 382 * @envelope: envelope data 383 * @custom_len: number of samples (FF_CUSTOM only) 384 * @custom_data: buffer of samples (FF_CUSTOM only) 385 * 386 * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, 387 * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined 388 * for the time being as no driver supports it yet. 389 * 390 * Note: the data pointed by custom_data is copied by the driver. 391 * You can therefore dispose of the memory after the upload/update. 392 */ 393struct ff_periodic_effect { 394 uint16_t waveform; 395 uint16_t period; 396 int16_t magnitude; 397 int16_t offset; 398 uint16_t phase; 399 400 struct ff_envelope envelope; 401 402 uint32_t custom_len; 403 int16_t *custom_data; 404}; 405 406/** 407 * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect 408 * @strong_magnitude: magnitude of the heavy motor 409 * @weak_magnitude: magnitude of the light one 410 * 411 * Some rumble pads have two motors of different weight. Strong_magnitude 412 * represents the magnitude of the vibration generated by the heavy one. 413 */ 414struct ff_rumble_effect { 415 uint16_t strong_magnitude; 416 uint16_t weak_magnitude; 417}; 418 419/** 420 * struct ff_effect - defines force feedback effect 421 * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, 422 * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) 423 * @id: an unique id assigned to an effect 424 * @direction: direction of the effect 425 * @trigger: trigger conditions (struct ff_trigger) 426 * @replay: scheduling of the effect (struct ff_replay) 427 * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, 428 * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further 429 * defining effect parameters 430 * 431 * This structure is sent through ioctl from the application to the driver. 432 * To create a new effect application should set its @id to -1; the kernel 433 * will return assigned @id which can later be used to update or delete 434 * this effect. 435 * 436 * Direction of the effect is encoded as follows: 437 * 0 deg -> 0x0000 (down) 438 * 90 deg -> 0x4000 (left) 439 * 180 deg -> 0x8000 (up) 440 * 270 deg -> 0xC000 (right) 441 */ 442struct ff_effect { 443 uint16_t type; 444 int16_t id; 445 uint16_t direction; 446 struct ff_trigger trigger; 447 struct ff_replay replay; 448 449 union { 450 struct ff_constant_effect constant; 451 struct ff_ramp_effect ramp; 452 struct ff_periodic_effect periodic; 453 struct ff_condition_effect condition[2]; /* One for each axis */ 454 struct ff_rumble_effect rumble; 455 } u; 456}; 457 458/* 459 * Force feedback effect types 460 */ 461 462#define FF_RUMBLE 0x50 463#define FF_PERIODIC 0x51 464#define FF_CONSTANT 0x52 465#define FF_SPRING 0x53 466#define FF_FRICTION 0x54 467#define FF_DAMPER 0x55 468#define FF_INERTIA 0x56 469#define FF_RAMP 0x57 470 471#define FF_EFFECT_MIN FF_RUMBLE 472#define FF_EFFECT_MAX FF_RAMP 473 474/* 475 * Force feedback periodic effect types 476 */ 477 478#define FF_SQUARE 0x58 479#define FF_TRIANGLE 0x59 480#define FF_SINE 0x5a 481#define FF_SAW_UP 0x5b 482#define FF_SAW_DOWN 0x5c 483#define FF_CUSTOM 0x5d 484 485#define FF_WAVEFORM_MIN FF_SQUARE 486#define FF_WAVEFORM_MAX FF_CUSTOM 487 488/* 489 * Set ff device properties 490 */ 491 492#define FF_GAIN 0x60 493#define FF_AUTOCENTER 0x61 494 495/* 496 * ff->playback(effect_id = FF_GAIN) is the first effect_id to 497 * cause a collision with another ff method, in this case ff->set_gain(). 498 * Therefore the greatest safe value for effect_id is FF_GAIN - 1, 499 * and thus the total number of effects should never exceed FF_GAIN. 500 */ 501#define FF_MAX_EFFECTS FF_GAIN 502 503#define FF_MAX 0x7f 504#define FF_CNT (FF_MAX+1) 505 506#endif /* _INPUT_H */ 507