LXR qemu/hw/arm/kzm.c

   1/*
   2 * KZM Board System emulation.
   3 *
   4 * Copyright (c) 2008 OKL and 2011 NICTA
   5 * Written by Hans at OK-Labs
   6 * Updated by Peter Chubb.
   7 *
   8 * This code is licensed under the GPL, version 2 or later.
   9 * See the file `COPYING' in the top level directory.
  10 *
  11 * It (partially) emulates a Kyoto Microcomputer
  12 * KZM-ARM11-01 evaluation board, with a Freescale
  13 * i.MX31 SoC
  14 */
  15
  16#include "qemu/osdep.h"
  17#include "qapi/error.h"
  18#include "cpu.h"
  19#include "hw/arm/fsl-imx31.h"
  20#include "hw/boards.h"
  21#include "qemu/error-report.h"
  22#include "exec/address-spaces.h"
  23#include "net/net.h"
  24#include "hw/net/lan9118.h"
  25#include "hw/char/serial.h"
  26#include "sysemu/qtest.h"
  27
  28/* Memory map for Kzm Emulation Baseboard:
  29 * 0x00000000-0x7fffffff See i.MX31 SOC for support
  30 * 0x80000000-0x8fffffff RAM                  EMULATED
  31 * 0x90000000-0x9fffffff RAM                  EMULATED
  32 * 0xa0000000-0xafffffff Flash                IGNORED
  33 * 0xb0000000-0xb3ffffff Unavailable          IGNORED
  34 * 0xb4000000-0xb4000fff 8-bit free space     IGNORED
  35 * 0xb4001000-0xb400100f Board control        IGNORED
  36 *  0xb4001003           DIP switch
  37 * 0xb4001010-0xb400101f 7-segment LED        IGNORED
  38 * 0xb4001020-0xb400102f LED                  IGNORED
  39 * 0xb4001030-0xb400103f LED                  IGNORED
  40 * 0xb4001040-0xb400104f FPGA, UART           EMULATED
  41 * 0xb4001050-0xb400105f FPGA, UART           EMULATED
  42 * 0xb4001060-0xb40fffff FPGA                 IGNORED
  43 * 0xb6000000-0xb61fffff LAN controller       EMULATED
  44 * 0xb6200000-0xb62fffff FPGA NAND Controller IGNORED
  45 * 0xb6300000-0xb7ffffff Free                 IGNORED
  46 * 0xb8000000-0xb8004fff Memory control registers IGNORED
  47 * 0xc0000000-0xc3ffffff PCMCIA/CF            IGNORED
  48 * 0xc4000000-0xffffffff Reserved             IGNORED
  49 */
  50
  51typedef struct IMX31KZM {
  52    FslIMX31State soc;
  53    MemoryRegion ram;
  54    MemoryRegion ram_alias;
  55} IMX31KZM;
  56
  57#define KZM_RAM_ADDR            (FSL_IMX31_SDRAM0_ADDR)
  58#define KZM_FPGA_ADDR           (FSL_IMX31_CS4_ADDR + 0x1040)
  59#define KZM_LAN9118_ADDR        (FSL_IMX31_CS5_ADDR)
  60
  61static struct arm_boot_info kzm_binfo = {
  62    .loader_start = KZM_RAM_ADDR,
  63    .board_id = 1722,
  64};
  65
  66static void kzm_init(MachineState *machine)
  67{
  68    IMX31KZM *s = g_new0(IMX31KZM, 1);
  69    unsigned int ram_size;
  70    unsigned int alias_offset;
  71    unsigned int i;
  72
  73    object_initialize_child(OBJECT(machine), "soc", &s->soc, sizeof(s->soc),
  74                            TYPE_FSL_IMX31, &error_abort, NULL);
  75
  76    object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal);
  77
  78    /* Check the amount of memory is compatible with the SOC */
  79    if (machine->ram_size > (FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE)) {
  80        warn_report("RAM size " RAM_ADDR_FMT " above max supported, "
  81                    "reduced to %x", machine->ram_size,
  82                    FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE);
  83        machine->ram_size = FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE;
  84    }
  85
  86    memory_region_allocate_system_memory(&s->ram, NULL, "kzm.ram",
  87                                         machine->ram_size);
  88    memory_region_add_subregion(get_system_memory(), FSL_IMX31_SDRAM0_ADDR,
  89                                &s->ram);
  90
  91    /* initialize the alias memory if any */
  92    for (i = 0, ram_size = machine->ram_size, alias_offset = 0;
  93         (i < 2) && ram_size; i++) {
  94        unsigned int size;
  95        static const struct {
  96            hwaddr addr;
  97            unsigned int size;
  98        } ram[2] = {
  99            { FSL_IMX31_SDRAM0_ADDR, FSL_IMX31_SDRAM0_SIZE },
 100            { FSL_IMX31_SDRAM1_ADDR, FSL_IMX31_SDRAM1_SIZE },
 101        };
 102
 103        size = MIN(ram_size, ram[i].size);
 104
 105        ram_size -= size;
 106
 107        if (size < ram[i].size) {
 108            memory_region_init_alias(&s->ram_alias, NULL, "ram.alias",
 109                                     &s->ram, alias_offset, ram[i].size - size);
 110            memory_region_add_subregion(get_system_memory(),
 111                                        ram[i].addr + size, &s->ram_alias);
 112        }
 113
 114        alias_offset += ram[i].size;
 115    }
 116
 117    if (nd_table[0].used) {
 118        lan9118_init(&nd_table[0], KZM_LAN9118_ADDR,
 119                     qdev_get_gpio_in(DEVICE(&s->soc.avic), 52));
 120    }
 121
 122    if (serial_hd(2)) { /* touchscreen */
 123        serial_mm_init(get_system_memory(), KZM_FPGA_ADDR+0x10, 0,
 124                       qdev_get_gpio_in(DEVICE(&s->soc.avic), 52),
 125                       14745600, serial_hd(2), DEVICE_NATIVE_ENDIAN);
 126    }
 127
 128    kzm_binfo.ram_size = machine->ram_size;
 129    kzm_binfo.kernel_filename = machine->kernel_filename;
 130    kzm_binfo.kernel_cmdline = machine->kernel_cmdline;
 131    kzm_binfo.initrd_filename = machine->initrd_filename;
 132    kzm_binfo.nb_cpus = 1;
 133
 134    if (!qtest_enabled()) {
 135        arm_load_kernel(&s->soc.cpu, &kzm_binfo);
 136    }
 137}
 138
 139static void kzm_machine_init(MachineClass *mc)
 140{
 141    mc->desc = "ARM KZM Emulation Baseboard (ARM1136)";
 142    mc->init = kzm_init;
 143    mc->ignore_memory_transaction_failures = true;
 144}
 145
 146DEFINE_MACHINE("kzm", kzm_machine_init)
 147