qemu/hw/display/xlnx_dp.c
<<
>>
Prefs
   1/*
   2 * xlnx_dp.c
   3 *
   4 *  Copyright (C) 2015 : GreenSocs Ltd
   5 *      http://www.greensocs.com/ , email: info@greensocs.com
   6 *
   7 *  Developed by :
   8 *  Frederic Konrad   <fred.konrad@greensocs.com>
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License as published by
  12 * the Free Software Foundation, either version 2 of the License, or
  13 * (at your option)any later version.
  14 *
  15 * This program is distributed in the hope that it will be useful,
  16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 * GNU General Public License for more details.
  19 *
  20 * You should have received a copy of the GNU General Public License along
  21 * with this program; if not, see <http://www.gnu.org/licenses/>.
  22 *
  23 */
  24
  25#include "qemu/osdep.h"
  26#include "qapi/error.h"
  27#include "qemu/log.h"
  28#include "qemu/module.h"
  29#include "hw/display/xlnx_dp.h"
  30
  31#ifndef DEBUG_DP
  32#define DEBUG_DP 0
  33#endif
  34
  35#define DPRINTF(fmt, ...) do {                                                 \
  36    if (DEBUG_DP) {                                                            \
  37        qemu_log("xlnx_dp: " fmt , ## __VA_ARGS__);                            \
  38    }                                                                          \
  39} while (0)
  40
  41/*
  42 * Register offset for DP.
  43 */
  44#define DP_LINK_BW_SET                      (0x0000 >> 2)
  45#define DP_LANE_COUNT_SET                   (0x0004 >> 2)
  46#define DP_ENHANCED_FRAME_EN                (0x0008 >> 2)
  47#define DP_TRAINING_PATTERN_SET             (0x000C >> 2)
  48#define DP_LINK_QUAL_PATTERN_SET            (0x0010 >> 2)
  49#define DP_SCRAMBLING_DISABLE               (0x0014 >> 2)
  50#define DP_DOWNSPREAD_CTRL                  (0x0018 >> 2)
  51#define DP_SOFTWARE_RESET                   (0x001C >> 2)
  52#define DP_TRANSMITTER_ENABLE               (0x0080 >> 2)
  53#define DP_MAIN_STREAM_ENABLE               (0x0084 >> 2)
  54#define DP_FORCE_SCRAMBLER_RESET            (0x00C0 >> 2)
  55#define DP_VERSION_REGISTER                 (0x00F8 >> 2)
  56#define DP_CORE_ID                          (0x00FC >> 2)
  57
  58#define DP_AUX_COMMAND_REGISTER             (0x0100 >> 2)
  59#define AUX_ADDR_ONLY_MASK                  (0x1000)
  60#define AUX_COMMAND_MASK                    (0x0F00)
  61#define AUX_COMMAND_SHIFT                   (8)
  62#define AUX_COMMAND_NBYTES                  (0x000F)
  63
  64#define DP_AUX_WRITE_FIFO                   (0x0104 >> 2)
  65#define DP_AUX_ADDRESS                      (0x0108 >> 2)
  66#define DP_AUX_CLOCK_DIVIDER                (0x010C >> 2)
  67#define DP_TX_USER_FIFO_OVERFLOW            (0x0110 >> 2)
  68#define DP_INTERRUPT_SIGNAL_STATE           (0x0130 >> 2)
  69#define DP_AUX_REPLY_DATA                   (0x0134 >> 2)
  70#define DP_AUX_REPLY_CODE                   (0x0138 >> 2)
  71#define DP_AUX_REPLY_COUNT                  (0x013C >> 2)
  72#define DP_REPLY_DATA_COUNT                 (0x0148 >> 2)
  73#define DP_REPLY_STATUS                     (0x014C >> 2)
  74#define DP_HPD_DURATION                     (0x0150 >> 2)
  75#define DP_MAIN_STREAM_HTOTAL               (0x0180 >> 2)
  76#define DP_MAIN_STREAM_VTOTAL               (0x0184 >> 2)
  77#define DP_MAIN_STREAM_POLARITY             (0x0188 >> 2)
  78#define DP_MAIN_STREAM_HSWIDTH              (0x018C >> 2)
  79#define DP_MAIN_STREAM_VSWIDTH              (0x0190 >> 2)
  80#define DP_MAIN_STREAM_HRES                 (0x0194 >> 2)
  81#define DP_MAIN_STREAM_VRES                 (0x0198 >> 2)
  82#define DP_MAIN_STREAM_HSTART               (0x019C >> 2)
  83#define DP_MAIN_STREAM_VSTART               (0x01A0 >> 2)
  84#define DP_MAIN_STREAM_MISC0                (0x01A4 >> 2)
  85#define DP_MAIN_STREAM_MISC1                (0x01A8 >> 2)
  86#define DP_MAIN_STREAM_M_VID                (0x01AC >> 2)
  87#define DP_MSA_TRANSFER_UNIT_SIZE           (0x01B0 >> 2)
  88#define DP_MAIN_STREAM_N_VID                (0x01B4 >> 2)
  89#define DP_USER_DATA_COUNT_PER_LANE         (0x01BC >> 2)
  90#define DP_MIN_BYTES_PER_TU                 (0x01C4 >> 2)
  91#define DP_FRAC_BYTES_PER_TU                (0x01C8 >> 2)
  92#define DP_INIT_WAIT                        (0x01CC >> 2)
  93#define DP_PHY_RESET                        (0x0200 >> 2)
  94#define DP_PHY_VOLTAGE_DIFF_LANE_0          (0x0220 >> 2)
  95#define DP_PHY_VOLTAGE_DIFF_LANE_1          (0x0224 >> 2)
  96#define DP_TRANSMIT_PRBS7                   (0x0230 >> 2)
  97#define DP_PHY_CLOCK_SELECT                 (0x0234 >> 2)
  98#define DP_TX_PHY_POWER_DOWN                (0x0238 >> 2)
  99#define DP_PHY_PRECURSOR_LANE_0             (0x023C >> 2)
 100#define DP_PHY_PRECURSOR_LANE_1             (0x0240 >> 2)
 101#define DP_PHY_POSTCURSOR_LANE_0            (0x024C >> 2)
 102#define DP_PHY_POSTCURSOR_LANE_1            (0x0250 >> 2)
 103#define DP_PHY_STATUS                       (0x0280 >> 2)
 104
 105#define DP_TX_AUDIO_CONTROL                 (0x0300 >> 2)
 106#define DP_TX_AUD_CTRL                      (1)
 107
 108#define DP_TX_AUDIO_CHANNELS                (0x0304 >> 2)
 109#define DP_TX_AUDIO_INFO_DATA(n)            ((0x0308 + 4 * n) >> 2)
 110#define DP_TX_M_AUD                         (0x0328 >> 2)
 111#define DP_TX_N_AUD                         (0x032C >> 2)
 112#define DP_TX_AUDIO_EXT_DATA(n)             ((0x0330 + 4 * n) >> 2)
 113#define DP_INT_STATUS                       (0x03A0 >> 2)
 114#define DP_INT_MASK                         (0x03A4 >> 2)
 115#define DP_INT_EN                           (0x03A8 >> 2)
 116#define DP_INT_DS                           (0x03AC >> 2)
 117
 118/*
 119 * Registers offset for Audio Video Buffer configuration.
 120 */
 121#define V_BLEND_OFFSET                      (0xA000)
 122#define V_BLEND_BG_CLR_0                    (0x0000 >> 2)
 123#define V_BLEND_BG_CLR_1                    (0x0004 >> 2)
 124#define V_BLEND_BG_CLR_2                    (0x0008 >> 2)
 125#define V_BLEND_SET_GLOBAL_ALPHA_REG        (0x000C >> 2)
 126#define V_BLEND_OUTPUT_VID_FORMAT           (0x0014 >> 2)
 127#define V_BLEND_LAYER0_CONTROL              (0x0018 >> 2)
 128#define V_BLEND_LAYER1_CONTROL              (0x001C >> 2)
 129
 130#define V_BLEND_RGB2YCBCR_COEFF(n)          ((0x0020 + 4 * n) >> 2)
 131#define V_BLEND_IN1CSC_COEFF(n)             ((0x0044 + 4 * n) >> 2)
 132
 133#define V_BLEND_LUMA_IN1CSC_OFFSET          (0x0068 >> 2)
 134#define V_BLEND_CR_IN1CSC_OFFSET            (0x006C >> 2)
 135#define V_BLEND_CB_IN1CSC_OFFSET            (0x0070 >> 2)
 136#define V_BLEND_LUMA_OUTCSC_OFFSET          (0x0074 >> 2)
 137#define V_BLEND_CR_OUTCSC_OFFSET            (0x0078 >> 2)
 138#define V_BLEND_CB_OUTCSC_OFFSET            (0x007C >> 2)
 139
 140#define V_BLEND_IN2CSC_COEFF(n)             ((0x0080 + 4 * n) >> 2)
 141
 142#define V_BLEND_LUMA_IN2CSC_OFFSET          (0x00A4 >> 2)
 143#define V_BLEND_CR_IN2CSC_OFFSET            (0x00A8 >> 2)
 144#define V_BLEND_CB_IN2CSC_OFFSET            (0x00AC >> 2)
 145#define V_BLEND_CHROMA_KEY_ENABLE           (0x01D0 >> 2)
 146#define V_BLEND_CHROMA_KEY_COMP1            (0x01D4 >> 2)
 147#define V_BLEND_CHROMA_KEY_COMP2            (0x01D8 >> 2)
 148#define V_BLEND_CHROMA_KEY_COMP3            (0x01DC >> 2)
 149
 150/*
 151 * Registers offset for Audio Video Buffer configuration.
 152 */
 153#define AV_BUF_MANAGER_OFFSET               (0xB000)
 154#define AV_BUF_FORMAT                       (0x0000 >> 2)
 155#define AV_BUF_NON_LIVE_LATENCY             (0x0008 >> 2)
 156#define AV_CHBUF0                           (0x0010 >> 2)
 157#define AV_CHBUF1                           (0x0014 >> 2)
 158#define AV_CHBUF2                           (0x0018 >> 2)
 159#define AV_CHBUF3                           (0x001C >> 2)
 160#define AV_CHBUF4                           (0x0020 >> 2)
 161#define AV_CHBUF5                           (0x0024 >> 2)
 162#define AV_BUF_STC_CONTROL                  (0x002C >> 2)
 163#define AV_BUF_STC_INIT_VALUE0              (0x0030 >> 2)
 164#define AV_BUF_STC_INIT_VALUE1              (0x0034 >> 2)
 165#define AV_BUF_STC_ADJ                      (0x0038 >> 2)
 166#define AV_BUF_STC_VIDEO_VSYNC_TS_REG0      (0x003C >> 2)
 167#define AV_BUF_STC_VIDEO_VSYNC_TS_REG1      (0x0040 >> 2)
 168#define AV_BUF_STC_EXT_VSYNC_TS_REG0        (0x0044 >> 2)
 169#define AV_BUF_STC_EXT_VSYNC_TS_REG1        (0x0048 >> 2)
 170#define AV_BUF_STC_CUSTOM_EVENT_TS_REG0     (0x004C >> 2)
 171#define AV_BUF_STC_CUSTOM_EVENT_TS_REG1     (0x0050 >> 2)
 172#define AV_BUF_STC_CUSTOM_EVENT2_TS_REG0    (0x0054 >> 2)
 173#define AV_BUF_STC_CUSTOM_EVENT2_TS_REG1    (0x0058 >> 2)
 174#define AV_BUF_STC_SNAPSHOT0                (0x0060 >> 2)
 175#define AV_BUF_STC_SNAPSHOT1                (0x0064 >> 2)
 176#define AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT    (0x0070 >> 2)
 177#define AV_BUF_HCOUNT_VCOUNT_INT0           (0x0074 >> 2)
 178#define AV_BUF_HCOUNT_VCOUNT_INT1           (0x0078 >> 2)
 179#define AV_BUF_DITHER_CONFIG                (0x007C >> 2)
 180#define AV_BUF_DITHER_CONFIG_MAX            (0x008C >> 2)
 181#define AV_BUF_DITHER_CONFIG_MIN            (0x0090 >> 2)
 182#define AV_BUF_PATTERN_GEN_SELECT           (0x0100 >> 2)
 183#define AV_BUF_AUD_VID_CLK_SOURCE           (0x0120 >> 2)
 184#define AV_BUF_SRST_REG                     (0x0124 >> 2)
 185#define AV_BUF_AUDIO_RDY_INTERVAL           (0x0128 >> 2)
 186#define AV_BUF_AUDIO_CH_CONFIG              (0x012C >> 2)
 187
 188#define AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(n)((0x0200 + 4 * n) >> 2)
 189
 190#define AV_BUF_VIDEO_COMP_SCALE_FACTOR(n)   ((0x020C + 4 * n) >> 2)
 191
 192#define AV_BUF_LIVE_VIDEO_COMP_SF(n)        ((0x0218 + 4 * n) >> 2)
 193
 194#define AV_BUF_LIVE_VID_CONFIG              (0x0224 >> 2)
 195
 196#define AV_BUF_LIVE_GFX_COMP_SF(n)          ((0x0228 + 4 * n) >> 2)
 197
 198#define AV_BUF_LIVE_GFX_CONFIG              (0x0234 >> 2)
 199
 200#define AUDIO_MIXER_REGISTER_OFFSET         (0xC000)
 201#define AUDIO_MIXER_VOLUME_CONTROL          (0x0000 >> 2)
 202#define AUDIO_MIXER_META_DATA               (0x0004 >> 2)
 203#define AUD_CH_STATUS_REG(n)                ((0x0008 + 4 * n) >> 2)
 204#define AUD_CH_A_DATA_REG(n)                ((0x0020 + 4 * n) >> 2)
 205#define AUD_CH_B_DATA_REG(n)                ((0x0038 + 4 * n) >> 2)
 206
 207#define DP_AUDIO_DMA_CHANNEL(n)             (4 + n)
 208#define DP_GRAPHIC_DMA_CHANNEL              (3)
 209#define DP_VIDEO_DMA_CHANNEL                (0)
 210
 211enum DPGraphicFmt {
 212    DP_GRAPHIC_RGBA8888 = 0 << 8,
 213    DP_GRAPHIC_ABGR8888 = 1 << 8,
 214    DP_GRAPHIC_RGB888 = 2 << 8,
 215    DP_GRAPHIC_BGR888 = 3 << 8,
 216    DP_GRAPHIC_RGBA5551 = 4 << 8,
 217    DP_GRAPHIC_RGBA4444 = 5 << 8,
 218    DP_GRAPHIC_RGB565 = 6 << 8,
 219    DP_GRAPHIC_8BPP = 7 << 8,
 220    DP_GRAPHIC_4BPP = 8 << 8,
 221    DP_GRAPHIC_2BPP = 9 << 8,
 222    DP_GRAPHIC_1BPP = 10 << 8,
 223    DP_GRAPHIC_MASK = 0xF << 8
 224};
 225
 226enum DPVideoFmt {
 227    DP_NL_VID_CB_Y0_CR_Y1 = 0,
 228    DP_NL_VID_CR_Y0_CB_Y1 = 1,
 229    DP_NL_VID_Y0_CR_Y1_CB = 2,
 230    DP_NL_VID_Y0_CB_Y1_CR = 3,
 231    DP_NL_VID_YV16 = 4,
 232    DP_NL_VID_YV24 = 5,
 233    DP_NL_VID_YV16CL = 6,
 234    DP_NL_VID_MONO = 7,
 235    DP_NL_VID_YV16CL2 = 8,
 236    DP_NL_VID_YUV444 = 9,
 237    DP_NL_VID_RGB888 = 10,
 238    DP_NL_VID_RGBA8880 = 11,
 239    DP_NL_VID_RGB888_10BPC = 12,
 240    DP_NL_VID_YUV444_10BPC = 13,
 241    DP_NL_VID_YV16CL2_10BPC = 14,
 242    DP_NL_VID_YV16CL_10BPC = 15,
 243    DP_NL_VID_YV16_10BPC = 16,
 244    DP_NL_VID_YV24_10BPC = 17,
 245    DP_NL_VID_Y_ONLY_10BPC = 18,
 246    DP_NL_VID_YV16_420 = 19,
 247    DP_NL_VID_YV16CL_420 = 20,
 248    DP_NL_VID_YV16CL2_420 = 21,
 249    DP_NL_VID_YV16_420_10BPC = 22,
 250    DP_NL_VID_YV16CL_420_10BPC = 23,
 251    DP_NL_VID_YV16CL2_420_10BPC = 24,
 252    DP_NL_VID_FMT_MASK = 0x1F
 253};
 254
 255typedef enum DPGraphicFmt DPGraphicFmt;
 256typedef enum DPVideoFmt DPVideoFmt;
 257
 258static const VMStateDescription vmstate_dp = {
 259    .name = TYPE_XLNX_DP,
 260    .version_id = 1,
 261    .fields = (VMStateField[]){
 262        VMSTATE_UINT32_ARRAY(core_registers, XlnxDPState,
 263                             DP_CORE_REG_ARRAY_SIZE),
 264        VMSTATE_UINT32_ARRAY(avbufm_registers, XlnxDPState,
 265                             DP_AVBUF_REG_ARRAY_SIZE),
 266        VMSTATE_UINT32_ARRAY(vblend_registers, XlnxDPState,
 267                             DP_VBLEND_REG_ARRAY_SIZE),
 268        VMSTATE_UINT32_ARRAY(audio_registers, XlnxDPState,
 269                             DP_AUDIO_REG_ARRAY_SIZE),
 270        VMSTATE_END_OF_LIST()
 271    }
 272};
 273
 274static void xlnx_dp_update_irq(XlnxDPState *s);
 275
 276static uint64_t xlnx_dp_audio_read(void *opaque, hwaddr offset, unsigned size)
 277{
 278    XlnxDPState *s = XLNX_DP(opaque);
 279
 280    offset = offset >> 2;
 281    return s->audio_registers[offset];
 282}
 283
 284static void xlnx_dp_audio_write(void *opaque, hwaddr offset, uint64_t value,
 285                                unsigned size)
 286{
 287    XlnxDPState *s = XLNX_DP(opaque);
 288
 289    offset = offset >> 2;
 290
 291    switch (offset) {
 292    case AUDIO_MIXER_META_DATA:
 293        s->audio_registers[offset] = value & 0x00000001;
 294        break;
 295    default:
 296        s->audio_registers[offset] = value;
 297        break;
 298    }
 299}
 300
 301static const MemoryRegionOps audio_ops = {
 302    .read = xlnx_dp_audio_read,
 303    .write = xlnx_dp_audio_write,
 304    .endianness = DEVICE_NATIVE_ENDIAN,
 305};
 306
 307static inline uint32_t xlnx_dp_audio_get_volume(XlnxDPState *s,
 308                                                uint8_t channel)
 309{
 310    switch (channel) {
 311    case 0:
 312        return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 0, 16);
 313    case 1:
 314        return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 16,
 315                                                                         16);
 316    default:
 317        return 0;
 318    }
 319}
 320
 321static inline void xlnx_dp_audio_activate(XlnxDPState *s)
 322{
 323    bool activated = ((s->core_registers[DP_TX_AUDIO_CONTROL]
 324                   & DP_TX_AUD_CTRL) != 0);
 325    AUD_set_active_out(s->amixer_output_stream, activated);
 326    xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(0),
 327                                      &s->audio_buffer_0);
 328    xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(1),
 329                                      &s->audio_buffer_1);
 330}
 331
 332static inline void xlnx_dp_audio_mix_buffer(XlnxDPState *s)
 333{
 334    /*
 335     * Audio packets are signed and have this shape:
 336     * | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
 337     * | R3 | L3 | R2 | L2 | R1 | L1 | R0 | L0 |
 338     *
 339     * Output audio is 16bits saturated.
 340     */
 341    int i;
 342
 343    if ((s->audio_data_available[0]) && (xlnx_dp_audio_get_volume(s, 0))) {
 344        for (i = 0; i < s->audio_data_available[0] / 2; i++) {
 345            s->temp_buffer[i] = (int64_t)(s->audio_buffer_0[i])
 346                              * xlnx_dp_audio_get_volume(s, 0) / 8192;
 347        }
 348        s->byte_left = s->audio_data_available[0];
 349    } else {
 350        memset(s->temp_buffer, 0, s->audio_data_available[1] / 2);
 351    }
 352
 353    if ((s->audio_data_available[1]) && (xlnx_dp_audio_get_volume(s, 1))) {
 354        if ((s->audio_data_available[0] == 0)
 355        || (s->audio_data_available[1] == s->audio_data_available[0])) {
 356            for (i = 0; i < s->audio_data_available[1] / 2; i++) {
 357                s->temp_buffer[i] += (int64_t)(s->audio_buffer_1[i])
 358                                   * xlnx_dp_audio_get_volume(s, 1) / 8192;
 359            }
 360            s->byte_left = s->audio_data_available[1];
 361        }
 362    }
 363
 364    for (i = 0; i < s->byte_left / 2; i++) {
 365        s->out_buffer[i] = MAX(-32767, MIN(s->temp_buffer[i], 32767));
 366    }
 367
 368    s->data_ptr = 0;
 369}
 370
 371static void xlnx_dp_audio_callback(void *opaque, int avail)
 372{
 373    /*
 374     * Get some data from the DPDMA and compute these datas.
 375     * Then wait for QEMU's audio subsystem to call this callback.
 376     */
 377    XlnxDPState *s = XLNX_DP(opaque);
 378    size_t written = 0;
 379
 380    /* If there are already some data don't get more data. */
 381    if (s->byte_left == 0) {
 382        s->audio_data_available[0] = xlnx_dpdma_start_operation(s->dpdma, 4,
 383                                                                  true);
 384        s->audio_data_available[1] = xlnx_dpdma_start_operation(s->dpdma, 5,
 385                                                                  true);
 386        xlnx_dp_audio_mix_buffer(s);
 387    }
 388
 389    /* Send the buffer through the audio. */
 390    if (s->byte_left <= MAX_QEMU_BUFFER_SIZE) {
 391        if (s->byte_left != 0) {
 392            written = AUD_write(s->amixer_output_stream,
 393                                &s->out_buffer[s->data_ptr], s->byte_left);
 394        } else {
 395            /*
 396             * There is nothing to play.. We don't have any data! Fill the
 397             * buffer with zero's and send it.
 398             */
 399            written = 0;
 400            memset(s->out_buffer, 0, 1024);
 401            AUD_write(s->amixer_output_stream, s->out_buffer, 1024);
 402        }
 403    } else {
 404        written = AUD_write(s->amixer_output_stream,
 405                            &s->out_buffer[s->data_ptr], MAX_QEMU_BUFFER_SIZE);
 406    }
 407    s->byte_left -= written;
 408    s->data_ptr += written;
 409}
 410
 411/*
 412 * AUX channel related function.
 413 */
 414static void xlnx_dp_aux_clear_rx_fifo(XlnxDPState *s)
 415{
 416    fifo8_reset(&s->rx_fifo);
 417}
 418
 419static void xlnx_dp_aux_push_rx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
 420{
 421    DPRINTF("Push %u data in rx_fifo\n", (unsigned)len);
 422    fifo8_push_all(&s->rx_fifo, buf, len);
 423}
 424
 425static uint8_t xlnx_dp_aux_pop_rx_fifo(XlnxDPState *s)
 426{
 427    uint8_t ret;
 428
 429    if (fifo8_is_empty(&s->rx_fifo)) {
 430        qemu_log_mask(LOG_GUEST_ERROR,
 431                      "%s: Reading empty RX_FIFO\n",
 432                      __func__);
 433        /*
 434         * The datasheet is not clear about the reset value, it seems
 435         * to be unspecified. We choose to return '0'.
 436         */
 437        ret = 0;
 438    } else {
 439        ret = fifo8_pop(&s->rx_fifo);
 440        DPRINTF("pop 0x%" PRIX8 " from rx_fifo.\n", ret);
 441    }
 442    return ret;
 443}
 444
 445static void xlnx_dp_aux_clear_tx_fifo(XlnxDPState *s)
 446{
 447    fifo8_reset(&s->tx_fifo);
 448}
 449
 450static void xlnx_dp_aux_push_tx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
 451{
 452    DPRINTF("Push %u data in tx_fifo\n", (unsigned)len);
 453    fifo8_push_all(&s->tx_fifo, buf, len);
 454}
 455
 456static uint8_t xlnx_dp_aux_pop_tx_fifo(XlnxDPState *s)
 457{
 458    uint8_t ret;
 459
 460    if (fifo8_is_empty(&s->tx_fifo)) {
 461        DPRINTF("tx_fifo underflow..\n");
 462        abort();
 463    }
 464    ret = fifo8_pop(&s->tx_fifo);
 465    DPRINTF("pop 0x%2.2X from tx_fifo.\n", ret);
 466    return ret;
 467}
 468
 469static uint32_t xlnx_dp_aux_get_address(XlnxDPState *s)
 470{
 471    return s->core_registers[DP_AUX_ADDRESS];
 472}
 473
 474/*
 475 * Get command from the register.
 476 */
 477static void xlnx_dp_aux_set_command(XlnxDPState *s, uint32_t value)
 478{
 479    bool address_only = (value & AUX_ADDR_ONLY_MASK) != 0;
 480    AUXCommand cmd = (value & AUX_COMMAND_MASK) >> AUX_COMMAND_SHIFT;
 481    uint8_t nbytes = (value & AUX_COMMAND_NBYTES) + 1;
 482    uint8_t buf[16];
 483    int i;
 484
 485    /*
 486     * When an address_only command is executed nothing happen to the fifo, so
 487     * just make nbytes = 0.
 488     */
 489    if (address_only) {
 490        nbytes = 0;
 491    }
 492
 493    switch (cmd) {
 494    case READ_AUX:
 495    case READ_I2C:
 496    case READ_I2C_MOT:
 497        s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
 498                                               xlnx_dp_aux_get_address(s),
 499                                               nbytes, buf);
 500        s->core_registers[DP_REPLY_DATA_COUNT] = nbytes;
 501
 502        if (s->core_registers[DP_AUX_REPLY_CODE] == AUX_I2C_ACK) {
 503            xlnx_dp_aux_push_rx_fifo(s, buf, nbytes);
 504        }
 505        break;
 506    case WRITE_AUX:
 507    case WRITE_I2C:
 508    case WRITE_I2C_MOT:
 509        for (i = 0; i < nbytes; i++) {
 510            buf[i] = xlnx_dp_aux_pop_tx_fifo(s);
 511        }
 512        s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
 513                                               xlnx_dp_aux_get_address(s),
 514                                               nbytes, buf);
 515        xlnx_dp_aux_clear_tx_fifo(s);
 516        break;
 517    case WRITE_I2C_STATUS:
 518        qemu_log_mask(LOG_UNIMP, "xlnx_dp: Write i2c status not implemented\n");
 519        break;
 520    default:
 521        abort();
 522    }
 523
 524    s->core_registers[DP_INTERRUPT_SIGNAL_STATE] |= 0x04;
 525}
 526
 527static void xlnx_dp_set_dpdma(const Object *obj, const char *name, Object *val,
 528                              Error **errp)
 529{
 530    XlnxDPState *s = XLNX_DP(obj);
 531    if (s->console) {
 532        DisplaySurface *surface = qemu_console_surface(s->console);
 533        XlnxDPDMAState *dma = XLNX_DPDMA(val);
 534        xlnx_dpdma_set_host_data_location(dma, DP_GRAPHIC_DMA_CHANNEL,
 535                                          surface_data(surface));
 536    }
 537}
 538
 539static inline uint8_t xlnx_dp_global_alpha_value(XlnxDPState *s)
 540{
 541    return (s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x1FE) >> 1;
 542}
 543
 544static inline bool xlnx_dp_global_alpha_enabled(XlnxDPState *s)
 545{
 546    /*
 547     * If the alpha is totally opaque (255) we consider the alpha is disabled to
 548     * reduce CPU consumption.
 549     */
 550    return ((xlnx_dp_global_alpha_value(s) != 0xFF) &&
 551           ((s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x01) != 0));
 552}
 553
 554static void xlnx_dp_recreate_surface(XlnxDPState *s)
 555{
 556    /*
 557     * Two possibilities, if blending is enabled the console displays
 558     * bout_plane, if not g_plane is displayed.
 559     */
 560    uint16_t width = s->core_registers[DP_MAIN_STREAM_HRES];
 561    uint16_t height = s->core_registers[DP_MAIN_STREAM_VRES];
 562    DisplaySurface *current_console_surface = qemu_console_surface(s->console);
 563
 564    if ((width != 0) && (height != 0)) {
 565        /*
 566         * As dpy_gfx_replace_surface calls qemu_free_displaysurface on the
 567         * surface we need to be careful and don't free the surface associated
 568         * to the console or double free will happen.
 569         */
 570        if (s->bout_plane.surface != current_console_surface) {
 571            qemu_free_displaysurface(s->bout_plane.surface);
 572        }
 573        if (s->v_plane.surface != current_console_surface) {
 574            qemu_free_displaysurface(s->v_plane.surface);
 575        }
 576        if (s->g_plane.surface != current_console_surface) {
 577            qemu_free_displaysurface(s->g_plane.surface);
 578        }
 579
 580        s->g_plane.surface
 581                = qemu_create_displaysurface_from(width, height,
 582                                                  s->g_plane.format, 0, NULL);
 583        s->v_plane.surface
 584                = qemu_create_displaysurface_from(width, height,
 585                                                  s->v_plane.format, 0, NULL);
 586        if (xlnx_dp_global_alpha_enabled(s)) {
 587            s->bout_plane.surface =
 588                            qemu_create_displaysurface_from(width,
 589                                                            height,
 590                                                            s->g_plane.format,
 591                                                            0, NULL);
 592            dpy_gfx_replace_surface(s->console, s->bout_plane.surface);
 593        } else {
 594            s->bout_plane.surface = NULL;
 595            dpy_gfx_replace_surface(s->console, s->g_plane.surface);
 596        }
 597
 598        xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
 599                                            surface_data(s->g_plane.surface));
 600        xlnx_dpdma_set_host_data_location(s->dpdma, DP_VIDEO_DMA_CHANNEL,
 601                                            surface_data(s->v_plane.surface));
 602    }
 603}
 604
 605/*
 606 * Change the graphic format of the surface.
 607 */
 608static void xlnx_dp_change_graphic_fmt(XlnxDPState *s)
 609{
 610    switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK) {
 611    case DP_GRAPHIC_RGBA8888:
 612        s->g_plane.format = PIXMAN_r8g8b8a8;
 613        break;
 614    case DP_GRAPHIC_ABGR8888:
 615        s->g_plane.format = PIXMAN_a8b8g8r8;
 616        break;
 617    case DP_GRAPHIC_RGB565:
 618        s->g_plane.format = PIXMAN_r5g6b5;
 619        break;
 620    case DP_GRAPHIC_RGB888:
 621        s->g_plane.format = PIXMAN_r8g8b8;
 622        break;
 623    case DP_GRAPHIC_BGR888:
 624        s->g_plane.format = PIXMAN_b8g8r8;
 625        break;
 626    default:
 627        DPRINTF("error: unsupported graphic format %u.\n",
 628                s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK);
 629        abort();
 630    }
 631
 632    switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK) {
 633    case 0:
 634        s->v_plane.format = PIXMAN_x8b8g8r8;
 635        break;
 636    case DP_NL_VID_Y0_CB_Y1_CR:
 637        s->v_plane.format = PIXMAN_yuy2;
 638        break;
 639    case DP_NL_VID_RGBA8880:
 640        s->v_plane.format = PIXMAN_x8b8g8r8;
 641        break;
 642    default:
 643        DPRINTF("error: unsupported video format %u.\n",
 644                s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK);
 645        abort();
 646    }
 647
 648    xlnx_dp_recreate_surface(s);
 649}
 650
 651static void xlnx_dp_update_irq(XlnxDPState *s)
 652{
 653    uint32_t flags;
 654
 655    flags = s->core_registers[DP_INT_STATUS] & ~s->core_registers[DP_INT_MASK];
 656    DPRINTF("update IRQ value = %" PRIx32 "\n", flags);
 657    qemu_set_irq(s->irq, flags != 0);
 658}
 659
 660static uint64_t xlnx_dp_read(void *opaque, hwaddr offset, unsigned size)
 661{
 662    XlnxDPState *s = XLNX_DP(opaque);
 663    uint64_t ret = 0;
 664
 665    offset = offset >> 2;
 666
 667    switch (offset) {
 668    case DP_TX_USER_FIFO_OVERFLOW:
 669        /* This register is cleared after a read */
 670        ret = s->core_registers[DP_TX_USER_FIFO_OVERFLOW];
 671        s->core_registers[DP_TX_USER_FIFO_OVERFLOW] = 0;
 672        break;
 673    case DP_AUX_REPLY_DATA:
 674        ret = xlnx_dp_aux_pop_rx_fifo(s);
 675        break;
 676    case DP_INTERRUPT_SIGNAL_STATE:
 677        /*
 678         * XXX: Not sure it is the right thing to do actually.
 679         * The register is not written by the device driver so it's stuck
 680         * to 0x04.
 681         */
 682        ret = s->core_registers[DP_INTERRUPT_SIGNAL_STATE];
 683        s->core_registers[DP_INTERRUPT_SIGNAL_STATE] &= ~0x04;
 684        break;
 685    case DP_AUX_WRITE_FIFO:
 686    case DP_TX_AUDIO_INFO_DATA(0):
 687    case DP_TX_AUDIO_INFO_DATA(1):
 688    case DP_TX_AUDIO_INFO_DATA(2):
 689    case DP_TX_AUDIO_INFO_DATA(3):
 690    case DP_TX_AUDIO_INFO_DATA(4):
 691    case DP_TX_AUDIO_INFO_DATA(5):
 692    case DP_TX_AUDIO_INFO_DATA(6):
 693    case DP_TX_AUDIO_INFO_DATA(7):
 694    case DP_TX_AUDIO_EXT_DATA(0):
 695    case DP_TX_AUDIO_EXT_DATA(1):
 696    case DP_TX_AUDIO_EXT_DATA(2):
 697    case DP_TX_AUDIO_EXT_DATA(3):
 698    case DP_TX_AUDIO_EXT_DATA(4):
 699    case DP_TX_AUDIO_EXT_DATA(5):
 700    case DP_TX_AUDIO_EXT_DATA(6):
 701    case DP_TX_AUDIO_EXT_DATA(7):
 702    case DP_TX_AUDIO_EXT_DATA(8):
 703        /* write only registers */
 704        ret = 0;
 705        break;
 706    default:
 707        assert(offset <= (0x3AC >> 2));
 708        ret = s->core_registers[offset];
 709        break;
 710    }
 711
 712    DPRINTF("core read @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset << 2, ret);
 713    return ret;
 714}
 715
 716static void xlnx_dp_write(void *opaque, hwaddr offset, uint64_t value,
 717                          unsigned size)
 718{
 719    XlnxDPState *s = XLNX_DP(opaque);
 720
 721    DPRINTF("core write @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset, value);
 722
 723    offset = offset >> 2;
 724
 725    switch (offset) {
 726    /*
 727     * Only special write case are handled.
 728     */
 729    case DP_LINK_BW_SET:
 730        s->core_registers[offset] = value & 0x000000FF;
 731        break;
 732    case DP_LANE_COUNT_SET:
 733    case DP_MAIN_STREAM_MISC0:
 734        s->core_registers[offset] = value & 0x0000000F;
 735        break;
 736    case DP_TRAINING_PATTERN_SET:
 737    case DP_LINK_QUAL_PATTERN_SET:
 738    case DP_MAIN_STREAM_POLARITY:
 739    case DP_PHY_VOLTAGE_DIFF_LANE_0:
 740    case DP_PHY_VOLTAGE_DIFF_LANE_1:
 741        s->core_registers[offset] = value & 0x00000003;
 742        break;
 743    case DP_ENHANCED_FRAME_EN:
 744    case DP_SCRAMBLING_DISABLE:
 745    case DP_DOWNSPREAD_CTRL:
 746    case DP_MAIN_STREAM_ENABLE:
 747    case DP_TRANSMIT_PRBS7:
 748        s->core_registers[offset] = value & 0x00000001;
 749        break;
 750    case DP_PHY_CLOCK_SELECT:
 751        s->core_registers[offset] = value & 0x00000007;
 752        break;
 753    case DP_SOFTWARE_RESET:
 754        /*
 755         * No need to update this bit as it's read '0'.
 756         */
 757        /*
 758         * TODO: reset IP.
 759         */
 760        break;
 761    case DP_TRANSMITTER_ENABLE:
 762        s->core_registers[offset] = value & 0x01;
 763        break;
 764    case DP_FORCE_SCRAMBLER_RESET:
 765        /*
 766         * No need to update this bit as it's read '0'.
 767         */
 768        /*
 769         * TODO: force a scrambler reset??
 770         */
 771        break;
 772    case DP_AUX_COMMAND_REGISTER:
 773        s->core_registers[offset] = value & 0x00001F0F;
 774        xlnx_dp_aux_set_command(s, s->core_registers[offset]);
 775        break;
 776    case DP_MAIN_STREAM_HTOTAL:
 777    case DP_MAIN_STREAM_VTOTAL:
 778    case DP_MAIN_STREAM_HSTART:
 779    case DP_MAIN_STREAM_VSTART:
 780        s->core_registers[offset] = value & 0x0000FFFF;
 781        break;
 782    case DP_MAIN_STREAM_HRES:
 783    case DP_MAIN_STREAM_VRES:
 784        s->core_registers[offset] = value & 0x0000FFFF;
 785        xlnx_dp_recreate_surface(s);
 786        break;
 787    case DP_MAIN_STREAM_HSWIDTH:
 788    case DP_MAIN_STREAM_VSWIDTH:
 789        s->core_registers[offset] = value & 0x00007FFF;
 790        break;
 791    case DP_MAIN_STREAM_MISC1:
 792        s->core_registers[offset] = value & 0x00000086;
 793        break;
 794    case DP_MAIN_STREAM_M_VID:
 795    case DP_MAIN_STREAM_N_VID:
 796        s->core_registers[offset] = value & 0x00FFFFFF;
 797        break;
 798    case DP_MSA_TRANSFER_UNIT_SIZE:
 799    case DP_MIN_BYTES_PER_TU:
 800    case DP_INIT_WAIT:
 801        s->core_registers[offset] = value & 0x00000007;
 802        break;
 803    case DP_USER_DATA_COUNT_PER_LANE:
 804        s->core_registers[offset] = value & 0x0003FFFF;
 805        break;
 806    case DP_FRAC_BYTES_PER_TU:
 807        s->core_registers[offset] = value & 0x000003FF;
 808        break;
 809    case DP_PHY_RESET:
 810        s->core_registers[offset] = value & 0x00010003;
 811        /*
 812         * TODO: Reset something?
 813         */
 814        break;
 815    case DP_TX_PHY_POWER_DOWN:
 816        s->core_registers[offset] = value & 0x0000000F;
 817        /*
 818         * TODO: Power down things?
 819         */
 820        break;
 821    case DP_AUX_WRITE_FIFO: {
 822        uint8_t c = value;
 823        xlnx_dp_aux_push_tx_fifo(s, &c, 1);
 824        break;
 825    }
 826    case DP_AUX_CLOCK_DIVIDER:
 827        break;
 828    case DP_AUX_REPLY_COUNT:
 829        /*
 830         * Writing to this register clear the counter.
 831         */
 832        s->core_registers[offset] = 0x00000000;
 833        break;
 834    case DP_AUX_ADDRESS:
 835        s->core_registers[offset] = value & 0x000FFFFF;
 836        break;
 837    case DP_VERSION_REGISTER:
 838    case DP_CORE_ID:
 839    case DP_TX_USER_FIFO_OVERFLOW:
 840    case DP_AUX_REPLY_DATA:
 841    case DP_AUX_REPLY_CODE:
 842    case DP_REPLY_DATA_COUNT:
 843    case DP_REPLY_STATUS:
 844    case DP_HPD_DURATION:
 845        /*
 846         * Write to read only location..
 847         */
 848        break;
 849    case DP_TX_AUDIO_CONTROL:
 850        s->core_registers[offset] = value & 0x00000001;
 851        xlnx_dp_audio_activate(s);
 852        break;
 853    case DP_TX_AUDIO_CHANNELS:
 854        s->core_registers[offset] = value & 0x00000007;
 855        xlnx_dp_audio_activate(s);
 856        break;
 857    case DP_INT_STATUS:
 858        s->core_registers[DP_INT_STATUS] &= ~value;
 859        xlnx_dp_update_irq(s);
 860        break;
 861    case DP_INT_EN:
 862        s->core_registers[DP_INT_MASK] &= ~value;
 863        xlnx_dp_update_irq(s);
 864        break;
 865    case DP_INT_DS:
 866        s->core_registers[DP_INT_MASK] |= ~value;
 867        xlnx_dp_update_irq(s);
 868        break;
 869    default:
 870        assert(offset <= (0x504C >> 2));
 871        s->core_registers[offset] = value;
 872        break;
 873    }
 874}
 875
 876static const MemoryRegionOps dp_ops = {
 877    .read = xlnx_dp_read,
 878    .write = xlnx_dp_write,
 879    .endianness = DEVICE_NATIVE_ENDIAN,
 880    .valid = {
 881        .min_access_size = 4,
 882        .max_access_size = 4,
 883    },
 884    .impl = {
 885        .min_access_size = 4,
 886        .max_access_size = 4,
 887    },
 888};
 889
 890/*
 891 * This is to handle Read/Write to the Video Blender.
 892 */
 893static void xlnx_dp_vblend_write(void *opaque, hwaddr offset,
 894                                 uint64_t value, unsigned size)
 895{
 896    XlnxDPState *s = XLNX_DP(opaque);
 897    bool alpha_was_enabled;
 898
 899    DPRINTF("vblend: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
 900                                                               (uint32_t)value);
 901    offset = offset >> 2;
 902
 903    switch (offset) {
 904    case V_BLEND_BG_CLR_0:
 905    case V_BLEND_BG_CLR_1:
 906    case V_BLEND_BG_CLR_2:
 907        s->vblend_registers[offset] = value & 0x00000FFF;
 908        break;
 909    case V_BLEND_SET_GLOBAL_ALPHA_REG:
 910        /*
 911         * A write to this register can enable or disable blending. Thus we need
 912         * to recreate the surfaces.
 913         */
 914        alpha_was_enabled = xlnx_dp_global_alpha_enabled(s);
 915        s->vblend_registers[offset] = value & 0x000001FF;
 916        if (xlnx_dp_global_alpha_enabled(s) != alpha_was_enabled) {
 917            xlnx_dp_recreate_surface(s);
 918        }
 919        break;
 920    case V_BLEND_OUTPUT_VID_FORMAT:
 921        s->vblend_registers[offset] = value & 0x00000017;
 922        break;
 923    case V_BLEND_LAYER0_CONTROL:
 924    case V_BLEND_LAYER1_CONTROL:
 925        s->vblend_registers[offset] = value & 0x00000103;
 926        break;
 927    case V_BLEND_RGB2YCBCR_COEFF(0):
 928    case V_BLEND_RGB2YCBCR_COEFF(1):
 929    case V_BLEND_RGB2YCBCR_COEFF(2):
 930    case V_BLEND_RGB2YCBCR_COEFF(3):
 931    case V_BLEND_RGB2YCBCR_COEFF(4):
 932    case V_BLEND_RGB2YCBCR_COEFF(5):
 933    case V_BLEND_RGB2YCBCR_COEFF(6):
 934    case V_BLEND_RGB2YCBCR_COEFF(7):
 935    case V_BLEND_RGB2YCBCR_COEFF(8):
 936    case V_BLEND_IN1CSC_COEFF(0):
 937    case V_BLEND_IN1CSC_COEFF(1):
 938    case V_BLEND_IN1CSC_COEFF(2):
 939    case V_BLEND_IN1CSC_COEFF(3):
 940    case V_BLEND_IN1CSC_COEFF(4):
 941    case V_BLEND_IN1CSC_COEFF(5):
 942    case V_BLEND_IN1CSC_COEFF(6):
 943    case V_BLEND_IN1CSC_COEFF(7):
 944    case V_BLEND_IN1CSC_COEFF(8):
 945    case V_BLEND_IN2CSC_COEFF(0):
 946    case V_BLEND_IN2CSC_COEFF(1):
 947    case V_BLEND_IN2CSC_COEFF(2):
 948    case V_BLEND_IN2CSC_COEFF(3):
 949    case V_BLEND_IN2CSC_COEFF(4):
 950    case V_BLEND_IN2CSC_COEFF(5):
 951    case V_BLEND_IN2CSC_COEFF(6):
 952    case V_BLEND_IN2CSC_COEFF(7):
 953    case V_BLEND_IN2CSC_COEFF(8):
 954        s->vblend_registers[offset] = value & 0x0000FFFF;
 955        break;
 956    case V_BLEND_LUMA_IN1CSC_OFFSET:
 957    case V_BLEND_CR_IN1CSC_OFFSET:
 958    case V_BLEND_CB_IN1CSC_OFFSET:
 959    case V_BLEND_LUMA_IN2CSC_OFFSET:
 960    case V_BLEND_CR_IN2CSC_OFFSET:
 961    case V_BLEND_CB_IN2CSC_OFFSET:
 962    case V_BLEND_LUMA_OUTCSC_OFFSET:
 963    case V_BLEND_CR_OUTCSC_OFFSET:
 964    case V_BLEND_CB_OUTCSC_OFFSET:
 965        s->vblend_registers[offset] = value & 0x3FFF7FFF;
 966        break;
 967    case V_BLEND_CHROMA_KEY_ENABLE:
 968        s->vblend_registers[offset] = value & 0x00000003;
 969        break;
 970    case V_BLEND_CHROMA_KEY_COMP1:
 971    case V_BLEND_CHROMA_KEY_COMP2:
 972    case V_BLEND_CHROMA_KEY_COMP3:
 973        s->vblend_registers[offset] = value & 0x0FFF0FFF;
 974        break;
 975    default:
 976        s->vblend_registers[offset] = value;
 977        break;
 978    }
 979}
 980
 981static uint64_t xlnx_dp_vblend_read(void *opaque, hwaddr offset,
 982                                    unsigned size)
 983{
 984    XlnxDPState *s = XLNX_DP(opaque);
 985
 986    DPRINTF("vblend: read @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
 987            s->vblend_registers[offset >> 2]);
 988    return s->vblend_registers[offset >> 2];
 989}
 990
 991static const MemoryRegionOps vblend_ops = {
 992    .read = xlnx_dp_vblend_read,
 993    .write = xlnx_dp_vblend_write,
 994    .endianness = DEVICE_NATIVE_ENDIAN,
 995    .valid = {
 996        .min_access_size = 4,
 997        .max_access_size = 4,
 998    },
 999    .impl = {
1000        .min_access_size = 4,
1001        .max_access_size = 4,
1002    },
1003};
1004
1005/*
1006 * This is to handle Read/Write to the Audio Video buffer manager.
1007 */
1008static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value,
1009                                 unsigned size)
1010{
1011    XlnxDPState *s = XLNX_DP(opaque);
1012
1013    DPRINTF("avbufm: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
1014                                                               (uint32_t)value);
1015    offset = offset >> 2;
1016
1017    switch (offset) {
1018    case AV_BUF_FORMAT:
1019        s->avbufm_registers[offset] = value & 0x00000FFF;
1020        xlnx_dp_change_graphic_fmt(s);
1021        break;
1022    case AV_CHBUF0:
1023    case AV_CHBUF1:
1024    case AV_CHBUF2:
1025    case AV_CHBUF3:
1026    case AV_CHBUF4:
1027    case AV_CHBUF5:
1028        s->avbufm_registers[offset] = value & 0x0000007F;
1029        break;
1030    case AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT:
1031        s->avbufm_registers[offset] = value & 0x0000007F;
1032        break;
1033    case AV_BUF_DITHER_CONFIG:
1034        s->avbufm_registers[offset] = value & 0x000007FF;
1035        break;
1036    case AV_BUF_DITHER_CONFIG_MAX:
1037    case AV_BUF_DITHER_CONFIG_MIN:
1038        s->avbufm_registers[offset] = value & 0x00000FFF;
1039        break;
1040    case AV_BUF_PATTERN_GEN_SELECT:
1041        s->avbufm_registers[offset] = value & 0xFFFFFF03;
1042        break;
1043    case AV_BUF_AUD_VID_CLK_SOURCE:
1044        s->avbufm_registers[offset] = value & 0x00000007;
1045        break;
1046    case AV_BUF_SRST_REG:
1047        s->avbufm_registers[offset] = value & 0x00000002;
1048        break;
1049    case AV_BUF_AUDIO_CH_CONFIG:
1050        s->avbufm_registers[offset] = value & 0x00000003;
1051        break;
1052    case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0):
1053    case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1):
1054    case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2):
1055    case AV_BUF_VIDEO_COMP_SCALE_FACTOR(0):
1056    case AV_BUF_VIDEO_COMP_SCALE_FACTOR(1):
1057    case AV_BUF_VIDEO_COMP_SCALE_FACTOR(2):
1058        s->avbufm_registers[offset] = value & 0x0000FFFF;
1059        break;
1060    case AV_BUF_LIVE_VIDEO_COMP_SF(0):
1061    case AV_BUF_LIVE_VIDEO_COMP_SF(1):
1062    case AV_BUF_LIVE_VIDEO_COMP_SF(2):
1063    case AV_BUF_LIVE_VID_CONFIG:
1064    case AV_BUF_LIVE_GFX_COMP_SF(0):
1065    case AV_BUF_LIVE_GFX_COMP_SF(1):
1066    case AV_BUF_LIVE_GFX_COMP_SF(2):
1067    case AV_BUF_LIVE_GFX_CONFIG:
1068    case AV_BUF_NON_LIVE_LATENCY:
1069    case AV_BUF_STC_CONTROL:
1070    case AV_BUF_STC_INIT_VALUE0:
1071    case AV_BUF_STC_INIT_VALUE1:
1072    case AV_BUF_STC_ADJ:
1073    case AV_BUF_STC_VIDEO_VSYNC_TS_REG0:
1074    case AV_BUF_STC_VIDEO_VSYNC_TS_REG1:
1075    case AV_BUF_STC_EXT_VSYNC_TS_REG0:
1076    case AV_BUF_STC_EXT_VSYNC_TS_REG1:
1077    case AV_BUF_STC_CUSTOM_EVENT_TS_REG0:
1078    case AV_BUF_STC_CUSTOM_EVENT_TS_REG1:
1079    case AV_BUF_STC_CUSTOM_EVENT2_TS_REG0:
1080    case AV_BUF_STC_CUSTOM_EVENT2_TS_REG1:
1081    case AV_BUF_STC_SNAPSHOT0:
1082    case AV_BUF_STC_SNAPSHOT1:
1083    case AV_BUF_HCOUNT_VCOUNT_INT0:
1084    case AV_BUF_HCOUNT_VCOUNT_INT1:
1085        qemu_log_mask(LOG_UNIMP, "avbufm: unimplemented register 0x%04"
1086                                 PRIx64 "\n",
1087                      offset << 2);
1088        break;
1089    default:
1090        s->avbufm_registers[offset] = value;
1091        break;
1092    }
1093}
1094
1095static uint64_t xlnx_dp_avbufm_read(void *opaque, hwaddr offset,
1096                                    unsigned size)
1097{
1098    XlnxDPState *s = XLNX_DP(opaque);
1099
1100    offset = offset >> 2;
1101    return s->avbufm_registers[offset];
1102}
1103
1104static const MemoryRegionOps avbufm_ops = {
1105    .read = xlnx_dp_avbufm_read,
1106    .write = xlnx_dp_avbufm_write,
1107    .endianness = DEVICE_NATIVE_ENDIAN,
1108    .valid = {
1109        .min_access_size = 4,
1110        .max_access_size = 4,
1111    },
1112    .impl = {
1113        .min_access_size = 4,
1114        .max_access_size = 4,
1115    },
1116};
1117
1118/*
1119 * This is a global alpha blending using pixman.
1120 * Both graphic and video planes are multiplied with the global alpha
1121 * coefficient and added.
1122 */
1123static inline void xlnx_dp_blend_surface(XlnxDPState *s)
1124{
1125    pixman_fixed_t alpha1[] = { pixman_double_to_fixed(1),
1126                                pixman_double_to_fixed(1),
1127                                pixman_double_to_fixed(1.0) };
1128    pixman_fixed_t alpha2[] = { pixman_double_to_fixed(1),
1129                                pixman_double_to_fixed(1),
1130                                pixman_double_to_fixed(1.0) };
1131
1132    if ((surface_width(s->g_plane.surface)
1133         != surface_width(s->v_plane.surface)) ||
1134        (surface_height(s->g_plane.surface)
1135         != surface_height(s->v_plane.surface))) {
1136        return;
1137    }
1138
1139    alpha1[2] = pixman_double_to_fixed((double)(xlnx_dp_global_alpha_value(s))
1140                                       / 256.0);
1141    alpha2[2] = pixman_double_to_fixed((255.0
1142                                    - (double)xlnx_dp_global_alpha_value(s))
1143                                       / 256.0);
1144
1145    pixman_image_set_filter(s->g_plane.surface->image,
1146                            PIXMAN_FILTER_CONVOLUTION, alpha1, 3);
1147    pixman_image_composite(PIXMAN_OP_SRC, s->g_plane.surface->image, 0,
1148                           s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1149                           surface_width(s->g_plane.surface),
1150                           surface_height(s->g_plane.surface));
1151    pixman_image_set_filter(s->v_plane.surface->image,
1152                            PIXMAN_FILTER_CONVOLUTION, alpha2, 3);
1153    pixman_image_composite(PIXMAN_OP_ADD, s->v_plane.surface->image, 0,
1154                           s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1155                           surface_width(s->g_plane.surface),
1156                           surface_height(s->g_plane.surface));
1157}
1158
1159static void xlnx_dp_update_display(void *opaque)
1160{
1161    XlnxDPState *s = XLNX_DP(opaque);
1162
1163    if ((s->core_registers[DP_TRANSMITTER_ENABLE] & 0x01) == 0) {
1164        return;
1165    }
1166
1167    s->core_registers[DP_INT_STATUS] |= (1 << 13);
1168    xlnx_dp_update_irq(s);
1169
1170    xlnx_dpdma_trigger_vsync_irq(s->dpdma);
1171
1172    /*
1173     * Trigger the DMA channel.
1174     */
1175    if (!xlnx_dpdma_start_operation(s->dpdma, 3, false)) {
1176        /*
1177         * An error occurred don't do anything with the data..
1178         * Trigger an underflow interrupt.
1179         */
1180        s->core_registers[DP_INT_STATUS] |= (1 << 21);
1181        xlnx_dp_update_irq(s);
1182        return;
1183    }
1184
1185    if (xlnx_dp_global_alpha_enabled(s)) {
1186        if (!xlnx_dpdma_start_operation(s->dpdma, 0, false)) {
1187            s->core_registers[DP_INT_STATUS] |= (1 << 21);
1188            xlnx_dp_update_irq(s);
1189            return;
1190        }
1191        xlnx_dp_blend_surface(s);
1192    }
1193
1194    /*
1195     * XXX: We might want to update only what changed.
1196     */
1197    dpy_gfx_update_full(s->console);
1198}
1199
1200static const GraphicHwOps xlnx_dp_gfx_ops = {
1201    .gfx_update  = xlnx_dp_update_display,
1202};
1203
1204static void xlnx_dp_init(Object *obj)
1205{
1206    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1207    XlnxDPState *s = XLNX_DP(obj);
1208
1209    memory_region_init(&s->container, obj, TYPE_XLNX_DP, 0xC050);
1210
1211    memory_region_init_io(&s->core_iomem, obj, &dp_ops, s, TYPE_XLNX_DP
1212                          ".core", 0x3AF);
1213    memory_region_add_subregion(&s->container, 0x0000, &s->core_iomem);
1214
1215    memory_region_init_io(&s->vblend_iomem, obj, &vblend_ops, s, TYPE_XLNX_DP
1216                          ".v_blend", 0x1DF);
1217    memory_region_add_subregion(&s->container, 0xA000, &s->vblend_iomem);
1218
1219    memory_region_init_io(&s->avbufm_iomem, obj, &avbufm_ops, s, TYPE_XLNX_DP
1220                          ".av_buffer_manager", 0x238);
1221    memory_region_add_subregion(&s->container, 0xB000, &s->avbufm_iomem);
1222
1223    memory_region_init_io(&s->audio_iomem, obj, &audio_ops, s, TYPE_XLNX_DP
1224                          ".audio", sizeof(s->audio_registers));
1225    memory_region_add_subregion(&s->container, 0xC000, &s->audio_iomem);
1226
1227    sysbus_init_mmio(sbd, &s->container);
1228    sysbus_init_irq(sbd, &s->irq);
1229
1230    object_property_add_link(obj, "dpdma", TYPE_XLNX_DPDMA,
1231                             (Object **) &s->dpdma,
1232                             xlnx_dp_set_dpdma,
1233                             OBJ_PROP_LINK_STRONG,
1234                             &error_abort);
1235
1236    /*
1237     * Initialize AUX Bus.
1238     */
1239    s->aux_bus = aux_init_bus(DEVICE(obj), "aux");
1240
1241    /*
1242     * Initialize DPCD and EDID..
1243     */
1244    s->dpcd = DPCD(aux_create_slave(s->aux_bus, "dpcd"));
1245    object_property_add_child(OBJECT(s), "dpcd", OBJECT(s->dpcd), NULL);
1246
1247    s->edid = I2CDDC(qdev_create(BUS(aux_get_i2c_bus(s->aux_bus)), "i2c-ddc"));
1248    i2c_set_slave_address(I2C_SLAVE(s->edid), 0x50);
1249    object_property_add_child(OBJECT(s), "edid", OBJECT(s->edid), NULL);
1250
1251    fifo8_create(&s->rx_fifo, 16);
1252    fifo8_create(&s->tx_fifo, 16);
1253}
1254
1255static void xlnx_dp_realize(DeviceState *dev, Error **errp)
1256{
1257    XlnxDPState *s = XLNX_DP(dev);
1258    DisplaySurface *surface;
1259    struct audsettings as;
1260
1261    qdev_init_nofail(DEVICE(s->dpcd));
1262    aux_map_slave(AUX_SLAVE(s->dpcd), 0x0000);
1263
1264    s->console = graphic_console_init(dev, 0, &xlnx_dp_gfx_ops, s);
1265    surface = qemu_console_surface(s->console);
1266    xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
1267                                      surface_data(surface));
1268
1269    as.freq = 44100;
1270    as.nchannels = 2;
1271    as.fmt = AUDIO_FORMAT_S16;
1272    as.endianness = 0;
1273
1274    AUD_register_card("xlnx_dp.audio", &s->aud_card);
1275
1276    s->amixer_output_stream = AUD_open_out(&s->aud_card,
1277                                           s->amixer_output_stream,
1278                                           "xlnx_dp.audio.out",
1279                                           s,
1280                                           xlnx_dp_audio_callback,
1281                                           &as);
1282    AUD_set_volume_out(s->amixer_output_stream, 0, 255, 255);
1283    xlnx_dp_audio_activate(s);
1284}
1285
1286static void xlnx_dp_reset(DeviceState *dev)
1287{
1288    XlnxDPState *s = XLNX_DP(dev);
1289
1290    memset(s->core_registers, 0, sizeof(s->core_registers));
1291    s->core_registers[DP_VERSION_REGISTER] = 0x04010000;
1292    s->core_registers[DP_CORE_ID] = 0x01020000;
1293    s->core_registers[DP_REPLY_STATUS] = 0x00000010;
1294    s->core_registers[DP_MSA_TRANSFER_UNIT_SIZE] = 0x00000040;
1295    s->core_registers[DP_INIT_WAIT] = 0x00000020;
1296    s->core_registers[DP_PHY_RESET] = 0x00010003;
1297    s->core_registers[DP_INT_MASK] = 0xFFFFF03F;
1298    s->core_registers[DP_PHY_STATUS] = 0x00000043;
1299    s->core_registers[DP_INTERRUPT_SIGNAL_STATE] = 0x00000001;
1300
1301    s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(0)] = 0x00001000;
1302    s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(4)] = 0x00001000;
1303    s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(8)] = 0x00001000;
1304    s->vblend_registers[V_BLEND_IN1CSC_COEFF(0)] = 0x00001000;
1305    s->vblend_registers[V_BLEND_IN1CSC_COEFF(4)] = 0x00001000;
1306    s->vblend_registers[V_BLEND_IN1CSC_COEFF(8)] = 0x00001000;
1307    s->vblend_registers[V_BLEND_IN2CSC_COEFF(0)] = 0x00001000;
1308    s->vblend_registers[V_BLEND_IN2CSC_COEFF(4)] = 0x00001000;
1309    s->vblend_registers[V_BLEND_IN2CSC_COEFF(8)] = 0x00001000;
1310
1311    s->avbufm_registers[AV_BUF_NON_LIVE_LATENCY] = 0x00000180;
1312    s->avbufm_registers[AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT] = 0x00000008;
1313    s->avbufm_registers[AV_BUF_DITHER_CONFIG_MAX] = 0x00000FFF;
1314    s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0)] = 0x00010101;
1315    s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1)] = 0x00010101;
1316    s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2)] = 0x00010101;
1317    s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(0)] = 0x00010101;
1318    s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(1)] = 0x00010101;
1319    s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(2)] = 0x00010101;
1320    s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(0)] = 0x00010101;
1321    s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(1)] = 0x00010101;
1322    s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(2)] = 0x00010101;
1323    s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(0)] = 0x00010101;
1324    s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(1)] = 0x00010101;
1325    s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(2)] = 0x00010101;
1326
1327    memset(s->audio_registers, 0, sizeof(s->audio_registers));
1328    s->byte_left = 0;
1329
1330    xlnx_dp_aux_clear_rx_fifo(s);
1331    xlnx_dp_change_graphic_fmt(s);
1332    xlnx_dp_update_irq(s);
1333}
1334
1335static void xlnx_dp_class_init(ObjectClass *oc, void *data)
1336{
1337    DeviceClass *dc = DEVICE_CLASS(oc);
1338
1339    dc->realize = xlnx_dp_realize;
1340    dc->vmsd = &vmstate_dp;
1341    dc->reset = xlnx_dp_reset;
1342}
1343
1344static const TypeInfo xlnx_dp_info = {
1345    .name          = TYPE_XLNX_DP,
1346    .parent        = TYPE_SYS_BUS_DEVICE,
1347    .instance_size = sizeof(XlnxDPState),
1348    .instance_init = xlnx_dp_init,
1349    .class_init    = xlnx_dp_class_init,
1350};
1351
1352static void xlnx_dp_register_types(void)
1353{
1354    type_register_static(&xlnx_dp_info);
1355}
1356
1357type_init(xlnx_dp_register_types)
1358