qemu/hw/ide/macio.c
<<
>>
Prefs
   1/*
   2 * QEMU IDE Emulation: MacIO support.
   3 *
   4 * Copyright (c) 2003 Fabrice Bellard
   5 * Copyright (c) 2006 Openedhand Ltd.
   6 *
   7 * Permission is hereby granted, free of charge, to any person obtaining a copy
   8 * of this software and associated documentation files (the "Software"), to deal
   9 * in the Software without restriction, including without limitation the rights
  10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11 * copies of the Software, and to permit persons to whom the Software is
  12 * furnished to do so, subject to the following conditions:
  13 *
  14 * The above copyright notice and this permission notice shall be included in
  15 * all copies or substantial portions of the Software.
  16 *
  17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23 * THE SOFTWARE.
  24 */
  25
  26#include "qemu/osdep.h"
  27#include "hw/hw.h"
  28#include "hw/ppc/mac.h"
  29#include "hw/ppc/mac_dbdma.h"
  30#include "qemu/module.h"
  31#include "hw/misc/macio/macio.h"
  32#include "sysemu/block-backend.h"
  33#include "sysemu/dma.h"
  34
  35#include "hw/ide/internal.h"
  36
  37/* debug MACIO */
  38// #define DEBUG_MACIO
  39
  40#ifdef DEBUG_MACIO
  41static const int debug_macio = 1;
  42#else
  43static const int debug_macio = 0;
  44#endif
  45
  46#define MACIO_DPRINTF(fmt, ...) do { \
  47        if (debug_macio) { \
  48            printf(fmt , ## __VA_ARGS__); \
  49        } \
  50    } while (0)
  51
  52
  53/***********************************************************/
  54/* MacIO based PowerPC IDE */
  55
  56#define MACIO_PAGE_SIZE 4096
  57
  58static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
  59{
  60    DBDMA_io *io = opaque;
  61    MACIOIDEState *m = io->opaque;
  62    IDEState *s = idebus_active_if(&m->bus);
  63    int64_t offset;
  64
  65    MACIO_DPRINTF("pmac_ide_atapi_transfer_cb\n");
  66
  67    if (ret < 0) {
  68        MACIO_DPRINTF("DMA error: %d\n", ret);
  69        qemu_sglist_destroy(&s->sg);
  70        ide_atapi_io_error(s, ret);
  71        goto done;
  72    }
  73
  74    if (!m->dma_active) {
  75        MACIO_DPRINTF("waiting for data (%#x - %#x - %x)\n",
  76                      s->nsector, io->len, s->status);
  77        /* data not ready yet, wait for the channel to get restarted */
  78        io->processing = false;
  79        return;
  80    }
  81
  82    if (s->io_buffer_size <= 0) {
  83        MACIO_DPRINTF("End of IDE transfer\n");
  84        qemu_sglist_destroy(&s->sg);
  85        ide_atapi_cmd_ok(s);
  86        m->dma_active = false;
  87        goto done;
  88    }
  89
  90    if (io->len == 0) {
  91        MACIO_DPRINTF("End of DMA transfer\n");
  92        goto done;
  93    }
  94
  95    if (s->lba == -1) {
  96        /* Non-block ATAPI transfer - just copy to RAM */
  97        s->io_buffer_size = MIN(s->io_buffer_size, io->len);
  98        dma_memory_write(&address_space_memory, io->addr, s->io_buffer,
  99                         s->io_buffer_size);
 100        io->len = 0;
 101        ide_atapi_cmd_ok(s);
 102        m->dma_active = false;
 103        goto done;
 104    }
 105
 106    /* Calculate current offset */
 107    offset = ((int64_t)s->lba << 11) + s->io_buffer_index;
 108
 109    qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1,
 110                     &address_space_memory);
 111    qemu_sglist_add(&s->sg, io->addr, io->len);
 112    s->io_buffer_size -= io->len;
 113    s->io_buffer_index += io->len;
 114    io->len = 0;
 115
 116    s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, 0x1,
 117                                      pmac_ide_atapi_transfer_cb, io);
 118    return;
 119
 120done:
 121    dma_memory_unmap(&address_space_memory, io->dma_mem, io->dma_len,
 122                     io->dir, io->dma_len);
 123
 124    if (ret < 0) {
 125        block_acct_failed(blk_get_stats(s->blk), &s->acct);
 126    } else {
 127        block_acct_done(blk_get_stats(s->blk), &s->acct);
 128    }
 129
 130    ide_set_inactive(s, false);
 131    io->dma_end(opaque);
 132}
 133
 134static void pmac_ide_transfer_cb(void *opaque, int ret)
 135{
 136    DBDMA_io *io = opaque;
 137    MACIOIDEState *m = io->opaque;
 138    IDEState *s = idebus_active_if(&m->bus);
 139    int64_t offset;
 140
 141    MACIO_DPRINTF("pmac_ide_transfer_cb\n");
 142
 143    if (ret < 0) {
 144        MACIO_DPRINTF("DMA error: %d\n", ret);
 145        qemu_sglist_destroy(&s->sg);
 146        ide_dma_error(s);
 147        goto done;
 148    }
 149
 150    if (!m->dma_active) {
 151        MACIO_DPRINTF("waiting for data (%#x - %#x - %x)\n",
 152                      s->nsector, io->len, s->status);
 153        /* data not ready yet, wait for the channel to get restarted */
 154        io->processing = false;
 155        return;
 156    }
 157
 158    if (s->io_buffer_size <= 0) {
 159        MACIO_DPRINTF("End of IDE transfer\n");
 160        qemu_sglist_destroy(&s->sg);
 161        s->status = READY_STAT | SEEK_STAT;
 162        ide_set_irq(s->bus);
 163        m->dma_active = false;
 164        goto done;
 165    }
 166
 167    if (io->len == 0) {
 168        MACIO_DPRINTF("End of DMA transfer\n");
 169        goto done;
 170    }
 171
 172    /* Calculate number of sectors */
 173    offset = (ide_get_sector(s) << 9) + s->io_buffer_index;
 174
 175    qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1,
 176                     &address_space_memory);
 177    qemu_sglist_add(&s->sg, io->addr, io->len);
 178    s->io_buffer_size -= io->len;
 179    s->io_buffer_index += io->len;
 180    io->len = 0;
 181
 182    switch (s->dma_cmd) {
 183    case IDE_DMA_READ:
 184        s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, 0x1,
 185                                          pmac_ide_atapi_transfer_cb, io);
 186        break;
 187    case IDE_DMA_WRITE:
 188        s->bus->dma->aiocb = dma_blk_write(s->blk, &s->sg, offset, 0x1,
 189                                           pmac_ide_transfer_cb, io);
 190        break;
 191    case IDE_DMA_TRIM:
 192        s->bus->dma->aiocb = dma_blk_io(blk_get_aio_context(s->blk), &s->sg,
 193                                        offset, 0x1, ide_issue_trim, s,
 194                                        pmac_ide_transfer_cb, io,
 195                                        DMA_DIRECTION_TO_DEVICE);
 196        break;
 197    default:
 198        abort();
 199    }
 200
 201    return;
 202
 203done:
 204    dma_memory_unmap(&address_space_memory, io->dma_mem, io->dma_len,
 205                     io->dir, io->dma_len);
 206
 207    if (s->dma_cmd == IDE_DMA_READ || s->dma_cmd == IDE_DMA_WRITE) {
 208        if (ret < 0) {
 209            block_acct_failed(blk_get_stats(s->blk), &s->acct);
 210        } else {
 211            block_acct_done(blk_get_stats(s->blk), &s->acct);
 212        }
 213    }
 214
 215    ide_set_inactive(s, false);
 216    io->dma_end(opaque);
 217}
 218
 219static void pmac_ide_transfer(DBDMA_io *io)
 220{
 221    MACIOIDEState *m = io->opaque;
 222    IDEState *s = idebus_active_if(&m->bus);
 223
 224    MACIO_DPRINTF("\n");
 225
 226    if (s->drive_kind == IDE_CD) {
 227        block_acct_start(blk_get_stats(s->blk), &s->acct, io->len,
 228                         BLOCK_ACCT_READ);
 229
 230        pmac_ide_atapi_transfer_cb(io, 0);
 231        return;
 232    }
 233
 234    switch (s->dma_cmd) {
 235    case IDE_DMA_READ:
 236        block_acct_start(blk_get_stats(s->blk), &s->acct, io->len,
 237                         BLOCK_ACCT_READ);
 238        break;
 239    case IDE_DMA_WRITE:
 240        block_acct_start(blk_get_stats(s->blk), &s->acct, io->len,
 241                         BLOCK_ACCT_WRITE);
 242        break;
 243    default:
 244        break;
 245    }
 246
 247    pmac_ide_transfer_cb(io, 0);
 248}
 249
 250static void pmac_ide_flush(DBDMA_io *io)
 251{
 252    MACIOIDEState *m = io->opaque;
 253    IDEState *s = idebus_active_if(&m->bus);
 254
 255    if (s->bus->dma->aiocb) {
 256        blk_drain(s->blk);
 257    }
 258}
 259
 260/* PowerMac IDE memory IO */
 261static uint64_t pmac_ide_read(void *opaque, hwaddr addr, unsigned size)
 262{
 263    MACIOIDEState *d = opaque;
 264    uint64_t retval = 0xffffffff;
 265    int reg = addr >> 4;
 266
 267    switch (reg) {
 268    case 0x0:
 269        if (size == 2) {
 270            retval = ide_data_readw(&d->bus, 0);
 271        } else if (size == 4) {
 272            retval = ide_data_readl(&d->bus, 0);
 273        }
 274        break;
 275    case 0x1 ... 0x7:
 276        if (size == 1) {
 277            retval = ide_ioport_read(&d->bus, reg);
 278        }
 279        break;
 280    case 0x8:
 281    case 0x16:
 282        if (size == 1) {
 283            retval = ide_status_read(&d->bus, 0);
 284        }
 285        break;
 286    case 0x20:
 287        if (size == 4) {
 288            retval = d->timing_reg;
 289        }
 290        break;
 291    case 0x30:
 292        /* This is an interrupt state register that only exists
 293         * in the KeyLargo and later variants. Bit 0x8000_0000
 294         * latches the DMA interrupt and has to be written to
 295         * clear. Bit 0x4000_0000 is an image of the disk
 296         * interrupt. MacOS X relies on this and will hang if
 297         * we don't provide at least the disk interrupt
 298         */
 299        if (size == 4) {
 300            retval = d->irq_reg;
 301        }
 302        break;
 303    }
 304
 305    return retval;
 306}
 307
 308
 309static void pmac_ide_write(void *opaque, hwaddr addr, uint64_t val,
 310                           unsigned size)
 311{
 312    MACIOIDEState *d = opaque;
 313    int reg = addr >> 4;
 314
 315    switch (reg) {
 316    case 0x0:
 317        if (size == 2) {
 318            ide_data_writew(&d->bus, 0, val);
 319        } else if (size == 4) {
 320            ide_data_writel(&d->bus, 0, val);
 321        }
 322        break;
 323    case 0x1 ... 0x7:
 324        if (size == 1) {
 325            ide_ioport_write(&d->bus, reg, val);
 326        }
 327        break;
 328    case 0x8:
 329    case 0x16:
 330        if (size == 1) {
 331            ide_cmd_write(&d->bus, 0, val);
 332        }
 333        break;
 334    case 0x20:
 335        if (size == 4) {
 336            d->timing_reg = val;
 337        }
 338        break;
 339    case 0x30:
 340        if (size == 4) {
 341            if (val & 0x80000000u) {
 342                d->irq_reg &= 0x7fffffff;
 343            }
 344        }
 345        break;
 346    }
 347}
 348
 349static const MemoryRegionOps pmac_ide_ops = {
 350    .read = pmac_ide_read,
 351    .write = pmac_ide_write,
 352    .valid.min_access_size = 1,
 353    .valid.max_access_size = 4,
 354    .endianness = DEVICE_LITTLE_ENDIAN,
 355};
 356
 357static const VMStateDescription vmstate_pmac = {
 358    .name = "ide",
 359    .version_id = 5,
 360    .minimum_version_id = 0,
 361    .fields = (VMStateField[]) {
 362        VMSTATE_IDE_BUS(bus, MACIOIDEState),
 363        VMSTATE_IDE_DRIVES(bus.ifs, MACIOIDEState),
 364        VMSTATE_BOOL(dma_active, MACIOIDEState),
 365        VMSTATE_UINT32(timing_reg, MACIOIDEState),
 366        VMSTATE_UINT32(irq_reg, MACIOIDEState),
 367        VMSTATE_END_OF_LIST()
 368    }
 369};
 370
 371static void macio_ide_reset(DeviceState *dev)
 372{
 373    MACIOIDEState *d = MACIO_IDE(dev);
 374
 375    ide_bus_reset(&d->bus);
 376}
 377
 378static int ide_nop_int(IDEDMA *dma, int x)
 379{
 380    return 0;
 381}
 382
 383static int32_t ide_nop_int32(IDEDMA *dma, int32_t l)
 384{
 385    return 0;
 386}
 387
 388static void ide_dbdma_start(IDEDMA *dma, IDEState *s,
 389                            BlockCompletionFunc *cb)
 390{
 391    MACIOIDEState *m = container_of(dma, MACIOIDEState, dma);
 392
 393    s->io_buffer_index = 0;
 394    if (s->drive_kind == IDE_CD) {
 395        s->io_buffer_size = s->packet_transfer_size;
 396    } else {
 397        s->io_buffer_size = s->nsector * BDRV_SECTOR_SIZE;
 398    }
 399
 400    MACIO_DPRINTF("\n\n------------ IDE transfer\n");
 401    MACIO_DPRINTF("buffer_size: %x   buffer_index: %x\n",
 402                  s->io_buffer_size, s->io_buffer_index);
 403    MACIO_DPRINTF("lba: %x    size: %x\n", s->lba, s->io_buffer_size);
 404    MACIO_DPRINTF("-------------------------\n");
 405
 406    m->dma_active = true;
 407    DBDMA_kick(m->dbdma);
 408}
 409
 410static const IDEDMAOps dbdma_ops = {
 411    .start_dma      = ide_dbdma_start,
 412    .prepare_buf    = ide_nop_int32,
 413    .rw_buf         = ide_nop_int,
 414};
 415
 416static void macio_ide_realizefn(DeviceState *dev, Error **errp)
 417{
 418    MACIOIDEState *s = MACIO_IDE(dev);
 419
 420    ide_init2(&s->bus, s->ide_irq);
 421
 422    /* Register DMA callbacks */
 423    s->dma.ops = &dbdma_ops;
 424    s->bus.dma = &s->dma;
 425}
 426
 427static void pmac_ide_irq(void *opaque, int n, int level)
 428{
 429    MACIOIDEState *s = opaque;
 430    uint32_t mask = 0x80000000u >> n;
 431
 432    /* We need to reflect the IRQ state in the irq register */
 433    if (level) {
 434        s->irq_reg |= mask;
 435    } else {
 436        s->irq_reg &= ~mask;
 437    }
 438
 439    if (n) {
 440        qemu_set_irq(s->real_ide_irq, level);
 441    } else {
 442        qemu_set_irq(s->real_dma_irq, level);
 443    }
 444}
 445
 446static void macio_ide_initfn(Object *obj)
 447{
 448    SysBusDevice *d = SYS_BUS_DEVICE(obj);
 449    MACIOIDEState *s = MACIO_IDE(obj);
 450
 451    ide_bus_new(&s->bus, sizeof(s->bus), DEVICE(obj), 0, 2);
 452    memory_region_init_io(&s->mem, obj, &pmac_ide_ops, s, "pmac-ide", 0x1000);
 453    sysbus_init_mmio(d, &s->mem);
 454    sysbus_init_irq(d, &s->real_ide_irq);
 455    sysbus_init_irq(d, &s->real_dma_irq);
 456    s->dma_irq = qemu_allocate_irq(pmac_ide_irq, s, 0);
 457    s->ide_irq = qemu_allocate_irq(pmac_ide_irq, s, 1);
 458
 459    object_property_add_link(obj, "dbdma", TYPE_MAC_DBDMA,
 460                             (Object **) &s->dbdma,
 461                             qdev_prop_allow_set_link_before_realize, 0, NULL);
 462}
 463
 464static Property macio_ide_properties[] = {
 465    DEFINE_PROP_UINT32("channel", MACIOIDEState, channel, 0),
 466    DEFINE_PROP_UINT32("addr", MACIOIDEState, addr, -1),
 467    DEFINE_PROP_END_OF_LIST(),
 468};
 469
 470static void macio_ide_class_init(ObjectClass *oc, void *data)
 471{
 472    DeviceClass *dc = DEVICE_CLASS(oc);
 473
 474    dc->realize = macio_ide_realizefn;
 475    dc->reset = macio_ide_reset;
 476    dc->props = macio_ide_properties;
 477    dc->vmsd = &vmstate_pmac;
 478    set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
 479}
 480
 481static const TypeInfo macio_ide_type_info = {
 482    .name = TYPE_MACIO_IDE,
 483    .parent = TYPE_SYS_BUS_DEVICE,
 484    .instance_size = sizeof(MACIOIDEState),
 485    .instance_init = macio_ide_initfn,
 486    .class_init = macio_ide_class_init,
 487};
 488
 489static void macio_ide_register_types(void)
 490{
 491    type_register_static(&macio_ide_type_info);
 492}
 493
 494/* hd_table must contain 2 block drivers */
 495void macio_ide_init_drives(MACIOIDEState *s, DriveInfo **hd_table)
 496{
 497    int i;
 498
 499    for (i = 0; i < 2; i++) {
 500        if (hd_table[i]) {
 501            ide_create_drive(&s->bus, i, hd_table[i]);
 502        }
 503    }
 504}
 505
 506void macio_ide_register_dma(MACIOIDEState *s)
 507{
 508    DBDMA_register_channel(s->dbdma, s->channel, s->dma_irq,
 509                           pmac_ide_transfer, pmac_ide_flush, s);
 510}
 511
 512type_init(macio_ide_register_types)
 513