qemu/hw/dma/pl080.c
<<
>>
Prefs
   1/*
   2 * Arm PrimeCell PL080/PL081 DMA controller
   3 *
   4 * Copyright (c) 2006 CodeSourcery.
   5 * Written by Paul Brook
   6 *
   7 * This code is licensed under the GPL.
   8 */
   9
  10#include "qemu/osdep.h"
  11#include "hw/sysbus.h"
  12#include "migration/vmstate.h"
  13#include "exec/address-spaces.h"
  14#include "qemu/log.h"
  15#include "qemu/module.h"
  16#include "hw/dma/pl080.h"
  17#include "hw/hw.h"
  18#include "hw/irq.h"
  19#include "hw/qdev-properties.h"
  20#include "qapi/error.h"
  21
  22#define PL080_CONF_E    0x1
  23#define PL080_CONF_M1   0x2
  24#define PL080_CONF_M2   0x4
  25
  26#define PL080_CCONF_H   0x40000
  27#define PL080_CCONF_A   0x20000
  28#define PL080_CCONF_L   0x10000
  29#define PL080_CCONF_ITC 0x08000
  30#define PL080_CCONF_IE  0x04000
  31#define PL080_CCONF_E   0x00001
  32
  33#define PL080_CCTRL_I   0x80000000
  34#define PL080_CCTRL_DI  0x08000000
  35#define PL080_CCTRL_SI  0x04000000
  36#define PL080_CCTRL_D   0x02000000
  37#define PL080_CCTRL_S   0x01000000
  38
  39static const VMStateDescription vmstate_pl080_channel = {
  40    .name = "pl080_channel",
  41    .version_id = 1,
  42    .minimum_version_id = 1,
  43    .fields = (VMStateField[]) {
  44        VMSTATE_UINT32(src, pl080_channel),
  45        VMSTATE_UINT32(dest, pl080_channel),
  46        VMSTATE_UINT32(lli, pl080_channel),
  47        VMSTATE_UINT32(ctrl, pl080_channel),
  48        VMSTATE_UINT32(conf, pl080_channel),
  49        VMSTATE_END_OF_LIST()
  50    }
  51};
  52
  53static const VMStateDescription vmstate_pl080 = {
  54    .name = "pl080",
  55    .version_id = 1,
  56    .minimum_version_id = 1,
  57    .fields = (VMStateField[]) {
  58        VMSTATE_UINT8(tc_int, PL080State),
  59        VMSTATE_UINT8(tc_mask, PL080State),
  60        VMSTATE_UINT8(err_int, PL080State),
  61        VMSTATE_UINT8(err_mask, PL080State),
  62        VMSTATE_UINT32(conf, PL080State),
  63        VMSTATE_UINT32(sync, PL080State),
  64        VMSTATE_UINT32(req_single, PL080State),
  65        VMSTATE_UINT32(req_burst, PL080State),
  66        VMSTATE_UINT8(tc_int, PL080State),
  67        VMSTATE_UINT8(tc_int, PL080State),
  68        VMSTATE_UINT8(tc_int, PL080State),
  69        VMSTATE_STRUCT_ARRAY(chan, PL080State, PL080_MAX_CHANNELS,
  70                             1, vmstate_pl080_channel, pl080_channel),
  71        VMSTATE_INT32(running, PL080State),
  72        VMSTATE_END_OF_LIST()
  73    }
  74};
  75
  76static const unsigned char pl080_id[] =
  77{ 0x80, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };
  78
  79static const unsigned char pl081_id[] =
  80{ 0x81, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };
  81
  82static void pl080_update(PL080State *s)
  83{
  84    bool tclevel = (s->tc_int & s->tc_mask);
  85    bool errlevel = (s->err_int & s->err_mask);
  86
  87    qemu_set_irq(s->interr, errlevel);
  88    qemu_set_irq(s->inttc, tclevel);
  89    qemu_set_irq(s->irq, errlevel || tclevel);
  90}
  91
  92static void pl080_run(PL080State *s)
  93{
  94    int c;
  95    int flow;
  96    pl080_channel *ch;
  97    int swidth;
  98    int dwidth;
  99    int xsize;
 100    int n;
 101    int src_id;
 102    int dest_id;
 103    int size;
 104    uint8_t buff[4];
 105    uint32_t req;
 106
 107    s->tc_mask = 0;
 108    for (c = 0; c < s->nchannels; c++) {
 109        if (s->chan[c].conf & PL080_CCONF_ITC)
 110            s->tc_mask |= 1 << c;
 111        if (s->chan[c].conf & PL080_CCONF_IE)
 112            s->err_mask |= 1 << c;
 113    }
 114
 115    if ((s->conf & PL080_CONF_E) == 0)
 116        return;
 117
 118    /* If we are already in the middle of a DMA operation then indicate that
 119       there may be new DMA requests and return immediately.  */
 120    if (s->running) {
 121        s->running++;
 122        return;
 123    }
 124    s->running = 1;
 125    while (s->running) {
 126        for (c = 0; c < s->nchannels; c++) {
 127            ch = &s->chan[c];
 128again:
 129            /* Test if thiws channel has any pending DMA requests.  */
 130            if ((ch->conf & (PL080_CCONF_H | PL080_CCONF_E))
 131                    != PL080_CCONF_E)
 132                continue;
 133            flow = (ch->conf >> 11) & 7;
 134            if (flow >= 4) {
 135                hw_error(
 136                    "pl080_run: Peripheral flow control not implemented\n");
 137            }
 138            src_id = (ch->conf >> 1) & 0x1f;
 139            dest_id = (ch->conf >> 6) & 0x1f;
 140            size = ch->ctrl & 0xfff;
 141            req = s->req_single | s->req_burst;
 142            switch (flow) {
 143            case 0:
 144                break;
 145            case 1:
 146                if ((req & (1u << dest_id)) == 0)
 147                    size = 0;
 148                break;
 149            case 2:
 150                if ((req & (1u << src_id)) == 0)
 151                    size = 0;
 152                break;
 153            case 3:
 154                if ((req & (1u << src_id)) == 0
 155                        || (req & (1u << dest_id)) == 0)
 156                    size = 0;
 157                break;
 158            }
 159            if (!size)
 160                continue;
 161
 162            /* Transfer one element.  */
 163            /* ??? Should transfer multiple elements for a burst request.  */
 164            /* ??? Unclear what the proper behavior is when source and
 165               destination widths are different.  */
 166            swidth = 1 << ((ch->ctrl >> 18) & 7);
 167            dwidth = 1 << ((ch->ctrl >> 21) & 7);
 168            for (n = 0; n < dwidth; n+= swidth) {
 169                address_space_read(&s->downstream_as, ch->src,
 170                                   MEMTXATTRS_UNSPECIFIED, buff + n, swidth);
 171                if (ch->ctrl & PL080_CCTRL_SI)
 172                    ch->src += swidth;
 173            }
 174            xsize = (dwidth < swidth) ? swidth : dwidth;
 175            /* ??? This may pad the value incorrectly for dwidth < 32.  */
 176            for (n = 0; n < xsize; n += dwidth) {
 177                address_space_write(&s->downstream_as, ch->dest + n,
 178                                    MEMTXATTRS_UNSPECIFIED, buff + n, dwidth);
 179                if (ch->ctrl & PL080_CCTRL_DI)
 180                    ch->dest += swidth;
 181            }
 182
 183            size--;
 184            ch->ctrl = (ch->ctrl & 0xfffff000) | size;
 185            if (size == 0) {
 186                /* Transfer complete.  */
 187                if (ch->lli) {
 188                    ch->src = address_space_ldl_le(&s->downstream_as,
 189                                                   ch->lli,
 190                                                   MEMTXATTRS_UNSPECIFIED,
 191                                                   NULL);
 192                    ch->dest = address_space_ldl_le(&s->downstream_as,
 193                                                    ch->lli + 4,
 194                                                    MEMTXATTRS_UNSPECIFIED,
 195                                                    NULL);
 196                    ch->ctrl = address_space_ldl_le(&s->downstream_as,
 197                                                    ch->lli + 12,
 198                                                    MEMTXATTRS_UNSPECIFIED,
 199                                                    NULL);
 200                    ch->lli = address_space_ldl_le(&s->downstream_as,
 201                                                   ch->lli + 8,
 202                                                   MEMTXATTRS_UNSPECIFIED,
 203                                                   NULL);
 204                } else {
 205                    ch->conf &= ~PL080_CCONF_E;
 206                }
 207                if (ch->ctrl & PL080_CCTRL_I) {
 208                    s->tc_int |= 1 << c;
 209                }
 210            }
 211            goto again;
 212        }
 213        if (--s->running)
 214            s->running = 1;
 215    }
 216}
 217
 218static uint64_t pl080_read(void *opaque, hwaddr offset,
 219                           unsigned size)
 220{
 221    PL080State *s = (PL080State *)opaque;
 222    uint32_t i;
 223    uint32_t mask;
 224
 225    if (offset >= 0xfe0 && offset < 0x1000) {
 226        if (s->nchannels == 8) {
 227            return pl080_id[(offset - 0xfe0) >> 2];
 228        } else {
 229            return pl081_id[(offset - 0xfe0) >> 2];
 230        }
 231    }
 232    if (offset >= 0x100 && offset < 0x200) {
 233        i = (offset & 0xe0) >> 5;
 234        if (i >= s->nchannels)
 235            goto bad_offset;
 236        switch ((offset >> 2) & 7) {
 237        case 0: /* SrcAddr */
 238            return s->chan[i].src;
 239        case 1: /* DestAddr */
 240            return s->chan[i].dest;
 241        case 2: /* LLI */
 242            return s->chan[i].lli;
 243        case 3: /* Control */
 244            return s->chan[i].ctrl;
 245        case 4: /* Configuration */
 246            return s->chan[i].conf;
 247        default:
 248            goto bad_offset;
 249        }
 250    }
 251    switch (offset >> 2) {
 252    case 0: /* IntStatus */
 253        return (s->tc_int & s->tc_mask) | (s->err_int & s->err_mask);
 254    case 1: /* IntTCStatus */
 255        return (s->tc_int & s->tc_mask);
 256    case 3: /* IntErrorStatus */
 257        return (s->err_int & s->err_mask);
 258    case 5: /* RawIntTCStatus */
 259        return s->tc_int;
 260    case 6: /* RawIntErrorStatus */
 261        return s->err_int;
 262    case 7: /* EnbldChns */
 263        mask = 0;
 264        for (i = 0; i < s->nchannels; i++) {
 265            if (s->chan[i].conf & PL080_CCONF_E)
 266                mask |= 1 << i;
 267        }
 268        return mask;
 269    case 8: /* SoftBReq */
 270    case 9: /* SoftSReq */
 271    case 10: /* SoftLBReq */
 272    case 11: /* SoftLSReq */
 273        /* ??? Implement these. */
 274        return 0;
 275    case 12: /* Configuration */
 276        return s->conf;
 277    case 13: /* Sync */
 278        return s->sync;
 279    default:
 280    bad_offset:
 281        qemu_log_mask(LOG_GUEST_ERROR,
 282                      "pl080_read: Bad offset %x\n", (int)offset);
 283        return 0;
 284    }
 285}
 286
 287static void pl080_write(void *opaque, hwaddr offset,
 288                        uint64_t value, unsigned size)
 289{
 290    PL080State *s = (PL080State *)opaque;
 291    int i;
 292
 293    if (offset >= 0x100 && offset < 0x200) {
 294        i = (offset & 0xe0) >> 5;
 295        if (i >= s->nchannels)
 296            goto bad_offset;
 297        switch ((offset >> 2) & 7) {
 298        case 0: /* SrcAddr */
 299            s->chan[i].src = value;
 300            break;
 301        case 1: /* DestAddr */
 302            s->chan[i].dest = value;
 303            break;
 304        case 2: /* LLI */
 305            s->chan[i].lli = value;
 306            break;
 307        case 3: /* Control */
 308            s->chan[i].ctrl = value;
 309            break;
 310        case 4: /* Configuration */
 311            s->chan[i].conf = value;
 312            pl080_run(s);
 313            break;
 314        }
 315        return;
 316    }
 317    switch (offset >> 2) {
 318    case 2: /* IntTCClear */
 319        s->tc_int &= ~value;
 320        break;
 321    case 4: /* IntErrorClear */
 322        s->err_int &= ~value;
 323        break;
 324    case 8: /* SoftBReq */
 325    case 9: /* SoftSReq */
 326    case 10: /* SoftLBReq */
 327    case 11: /* SoftLSReq */
 328        /* ??? Implement these.  */
 329        qemu_log_mask(LOG_UNIMP, "pl080_write: Soft DMA not implemented\n");
 330        break;
 331    case 12: /* Configuration */
 332        s->conf = value;
 333        if (s->conf & (PL080_CONF_M1 | PL080_CONF_M2)) {
 334            qemu_log_mask(LOG_UNIMP,
 335                          "pl080_write: Big-endian DMA not implemented\n");
 336        }
 337        pl080_run(s);
 338        break;
 339    case 13: /* Sync */
 340        s->sync = value;
 341        break;
 342    default:
 343    bad_offset:
 344        qemu_log_mask(LOG_GUEST_ERROR,
 345                      "pl080_write: Bad offset %x\n", (int)offset);
 346    }
 347    pl080_update(s);
 348}
 349
 350static const MemoryRegionOps pl080_ops = {
 351    .read = pl080_read,
 352    .write = pl080_write,
 353    .endianness = DEVICE_NATIVE_ENDIAN,
 354};
 355
 356static void pl080_reset(DeviceState *dev)
 357{
 358    PL080State *s = PL080(dev);
 359    int i;
 360
 361    s->tc_int = 0;
 362    s->tc_mask = 0;
 363    s->err_int = 0;
 364    s->err_mask = 0;
 365    s->conf = 0;
 366    s->sync = 0;
 367    s->req_single = 0;
 368    s->req_burst = 0;
 369    s->running = 0;
 370
 371    for (i = 0; i < s->nchannels; i++) {
 372        s->chan[i].src = 0;
 373        s->chan[i].dest = 0;
 374        s->chan[i].lli = 0;
 375        s->chan[i].ctrl = 0;
 376        s->chan[i].conf = 0;
 377    }
 378}
 379
 380static void pl080_init(Object *obj)
 381{
 382    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 383    PL080State *s = PL080(obj);
 384
 385    memory_region_init_io(&s->iomem, OBJECT(s), &pl080_ops, s, "pl080", 0x1000);
 386    sysbus_init_mmio(sbd, &s->iomem);
 387    sysbus_init_irq(sbd, &s->irq);
 388    sysbus_init_irq(sbd, &s->interr);
 389    sysbus_init_irq(sbd, &s->inttc);
 390    s->nchannels = 8;
 391}
 392
 393static void pl080_realize(DeviceState *dev, Error **errp)
 394{
 395    PL080State *s = PL080(dev);
 396
 397    if (!s->downstream) {
 398        error_setg(errp, "PL080 'downstream' link not set");
 399        return;
 400    }
 401
 402    address_space_init(&s->downstream_as, s->downstream, "pl080-downstream");
 403}
 404
 405static void pl081_init(Object *obj)
 406{
 407    PL080State *s = PL080(obj);
 408
 409    s->nchannels = 2;
 410}
 411
 412static Property pl080_properties[] = {
 413    DEFINE_PROP_LINK("downstream", PL080State, downstream,
 414                     TYPE_MEMORY_REGION, MemoryRegion *),
 415    DEFINE_PROP_END_OF_LIST(),
 416};
 417
 418static void pl080_class_init(ObjectClass *oc, void *data)
 419{
 420    DeviceClass *dc = DEVICE_CLASS(oc);
 421
 422    dc->vmsd = &vmstate_pl080;
 423    dc->realize = pl080_realize;
 424    dc->props = pl080_properties;
 425    dc->reset = pl080_reset;
 426}
 427
 428static const TypeInfo pl080_info = {
 429    .name          = TYPE_PL080,
 430    .parent        = TYPE_SYS_BUS_DEVICE,
 431    .instance_size = sizeof(PL080State),
 432    .instance_init = pl080_init,
 433    .class_init    = pl080_class_init,
 434};
 435
 436static const TypeInfo pl081_info = {
 437    .name          = TYPE_PL081,
 438    .parent        = TYPE_PL080,
 439    .instance_init = pl081_init,
 440};
 441
 442/* The PL080 and PL081 are the same except for the number of channels
 443   they implement (8 and 2 respectively).  */
 444static void pl080_register_types(void)
 445{
 446    type_register_static(&pl080_info);
 447    type_register_static(&pl081_info);
 448}
 449
 450type_init(pl080_register_types)
 451