qemu/hw/i386/pc.c
<<
>>
Prefs
   1/*
   2 * QEMU PC System Emulator
   3 *
   4 * Copyright (c) 2003-2004 Fabrice Bellard
   5 *
   6 * Permission is hereby granted, free of charge, to any person obtaining a copy
   7 * of this software and associated documentation files (the "Software"), to deal
   8 * in the Software without restriction, including without limitation the rights
   9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10 * copies of the Software, and to permit persons to whom the Software is
  11 * furnished to do so, subject to the following conditions:
  12 *
  13 * The above copyright notice and this permission notice shall be included in
  14 * all copies or substantial portions of the Software.
  15 *
  16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22 * THE SOFTWARE.
  23 */
  24
  25#include "qemu/osdep.h"
  26#include "qemu/units.h"
  27#include "hw/i386/x86.h"
  28#include "hw/i386/pc.h"
  29#include "hw/char/serial.h"
  30#include "hw/char/parallel.h"
  31#include "hw/i386/apic.h"
  32#include "hw/i386/topology.h"
  33#include "hw/i386/fw_cfg.h"
  34#include "sysemu/cpus.h"
  35#include "hw/block/fdc.h"
  36#include "hw/ide.h"
  37#include "hw/pci/pci.h"
  38#include "hw/pci/pci_bus.h"
  39#include "hw/nvram/fw_cfg.h"
  40#include "hw/timer/hpet.h"
  41#include "hw/firmware/smbios.h"
  42#include "hw/loader.h"
  43#include "elf.h"
  44#include "migration/vmstate.h"
  45#include "multiboot.h"
  46#include "hw/rtc/mc146818rtc.h"
  47#include "hw/dma/i8257.h"
  48#include "hw/timer/i8254.h"
  49#include "hw/input/i8042.h"
  50#include "hw/irq.h"
  51#include "hw/audio/pcspk.h"
  52#include "hw/pci/msi.h"
  53#include "hw/sysbus.h"
  54#include "sysemu/sysemu.h"
  55#include "sysemu/tcg.h"
  56#include "sysemu/numa.h"
  57#include "sysemu/kvm.h"
  58#include "sysemu/qtest.h"
  59#include "sysemu/reset.h"
  60#include "sysemu/runstate.h"
  61#include "kvm_i386.h"
  62#include "hw/xen/xen.h"
  63#include "hw/xen/start_info.h"
  64#include "ui/qemu-spice.h"
  65#include "exec/memory.h"
  66#include "exec/address-spaces.h"
  67#include "sysemu/arch_init.h"
  68#include "qemu/bitmap.h"
  69#include "qemu/config-file.h"
  70#include "qemu/error-report.h"
  71#include "qemu/option.h"
  72#include "qemu/cutils.h"
  73#include "hw/acpi/acpi.h"
  74#include "hw/acpi/cpu_hotplug.h"
  75#include "hw/boards.h"
  76#include "acpi-build.h"
  77#include "hw/mem/pc-dimm.h"
  78#include "qapi/error.h"
  79#include "qapi/qapi-visit-common.h"
  80#include "qapi/visitor.h"
  81#include "hw/core/cpu.h"
  82#include "hw/usb.h"
  83#include "hw/i386/intel_iommu.h"
  84#include "hw/net/ne2000-isa.h"
  85#include "standard-headers/asm-x86/bootparam.h"
  86#include "hw/virtio/virtio-pmem-pci.h"
  87#include "hw/mem/memory-device.h"
  88#include "sysemu/replay.h"
  89#include "qapi/qmp/qerror.h"
  90#include "config-devices.h"
  91#include "e820_memory_layout.h"
  92#include "fw_cfg.h"
  93
  94/* debug PC/ISA interrupts */
  95//#define DEBUG_IRQ
  96
  97#ifdef DEBUG_IRQ
  98#define DPRINTF(fmt, ...)                                       \
  99    do { printf("CPUIRQ: " fmt , ## __VA_ARGS__); } while (0)
 100#else
 101#define DPRINTF(fmt, ...)
 102#endif
 103
 104struct hpet_fw_config hpet_cfg = {.count = UINT8_MAX};
 105
 106GlobalProperty pc_compat_4_1[] = {};
 107const size_t pc_compat_4_1_len = G_N_ELEMENTS(pc_compat_4_1);
 108
 109GlobalProperty pc_compat_4_0[] = {};
 110const size_t pc_compat_4_0_len = G_N_ELEMENTS(pc_compat_4_0);
 111
 112GlobalProperty pc_compat_3_1[] = {
 113    { "intel-iommu", "dma-drain", "off" },
 114    { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "off" },
 115    { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "off" },
 116    { "Opteron_G4" "-" TYPE_X86_CPU, "npt", "off" },
 117    { "Opteron_G4" "-" TYPE_X86_CPU, "nrip-save", "off" },
 118    { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "off" },
 119    { "Opteron_G5" "-" TYPE_X86_CPU, "npt", "off" },
 120    { "Opteron_G5" "-" TYPE_X86_CPU, "nrip-save", "off" },
 121    { "EPYC" "-" TYPE_X86_CPU, "npt", "off" },
 122    { "EPYC" "-" TYPE_X86_CPU, "nrip-save", "off" },
 123    { "EPYC-IBPB" "-" TYPE_X86_CPU, "npt", "off" },
 124    { "EPYC-IBPB" "-" TYPE_X86_CPU, "nrip-save", "off" },
 125    { "Skylake-Client" "-" TYPE_X86_CPU,      "mpx", "on" },
 126    { "Skylake-Client-IBRS" "-" TYPE_X86_CPU, "mpx", "on" },
 127    { "Skylake-Server" "-" TYPE_X86_CPU,      "mpx", "on" },
 128    { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "mpx", "on" },
 129    { "Cascadelake-Server" "-" TYPE_X86_CPU,  "mpx", "on" },
 130    { "Icelake-Client" "-" TYPE_X86_CPU,      "mpx", "on" },
 131    { "Icelake-Server" "-" TYPE_X86_CPU,      "mpx", "on" },
 132    { "Cascadelake-Server" "-" TYPE_X86_CPU, "stepping", "5" },
 133    { TYPE_X86_CPU, "x-intel-pt-auto-level", "off" },
 134};
 135const size_t pc_compat_3_1_len = G_N_ELEMENTS(pc_compat_3_1);
 136
 137GlobalProperty pc_compat_3_0[] = {
 138    { TYPE_X86_CPU, "x-hv-synic-kvm-only", "on" },
 139    { "Skylake-Server" "-" TYPE_X86_CPU, "pku", "off" },
 140    { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "pku", "off" },
 141};
 142const size_t pc_compat_3_0_len = G_N_ELEMENTS(pc_compat_3_0);
 143
 144GlobalProperty pc_compat_2_12[] = {
 145    { TYPE_X86_CPU, "legacy-cache", "on" },
 146    { TYPE_X86_CPU, "topoext", "off" },
 147    { "EPYC-" TYPE_X86_CPU, "xlevel", "0x8000000a" },
 148    { "EPYC-IBPB-" TYPE_X86_CPU, "xlevel", "0x8000000a" },
 149};
 150const size_t pc_compat_2_12_len = G_N_ELEMENTS(pc_compat_2_12);
 151
 152GlobalProperty pc_compat_2_11[] = {
 153    { TYPE_X86_CPU, "x-migrate-smi-count", "off" },
 154    { "Skylake-Server" "-" TYPE_X86_CPU, "clflushopt", "off" },
 155};
 156const size_t pc_compat_2_11_len = G_N_ELEMENTS(pc_compat_2_11);
 157
 158GlobalProperty pc_compat_2_10[] = {
 159    { TYPE_X86_CPU, "x-hv-max-vps", "0x40" },
 160    { "i440FX-pcihost", "x-pci-hole64-fix", "off" },
 161    { "q35-pcihost", "x-pci-hole64-fix", "off" },
 162};
 163const size_t pc_compat_2_10_len = G_N_ELEMENTS(pc_compat_2_10);
 164
 165GlobalProperty pc_compat_2_9[] = {
 166    { "mch", "extended-tseg-mbytes", "0" },
 167};
 168const size_t pc_compat_2_9_len = G_N_ELEMENTS(pc_compat_2_9);
 169
 170GlobalProperty pc_compat_2_8[] = {
 171    { TYPE_X86_CPU, "tcg-cpuid", "off" },
 172    { "kvmclock", "x-mach-use-reliable-get-clock", "off" },
 173    { "ICH9-LPC", "x-smi-broadcast", "off" },
 174    { TYPE_X86_CPU, "vmware-cpuid-freq", "off" },
 175    { "Haswell-" TYPE_X86_CPU, "stepping", "1" },
 176};
 177const size_t pc_compat_2_8_len = G_N_ELEMENTS(pc_compat_2_8);
 178
 179GlobalProperty pc_compat_2_7[] = {
 180    { TYPE_X86_CPU, "l3-cache", "off" },
 181    { TYPE_X86_CPU, "full-cpuid-auto-level", "off" },
 182    { "Opteron_G3" "-" TYPE_X86_CPU, "family", "15" },
 183    { "Opteron_G3" "-" TYPE_X86_CPU, "model", "6" },
 184    { "Opteron_G3" "-" TYPE_X86_CPU, "stepping", "1" },
 185    { "isa-pcspk", "migrate", "off" },
 186};
 187const size_t pc_compat_2_7_len = G_N_ELEMENTS(pc_compat_2_7);
 188
 189GlobalProperty pc_compat_2_6[] = {
 190    { TYPE_X86_CPU, "cpuid-0xb", "off" },
 191    { "vmxnet3", "romfile", "" },
 192    { TYPE_X86_CPU, "fill-mtrr-mask", "off" },
 193    { "apic-common", "legacy-instance-id", "on", }
 194};
 195const size_t pc_compat_2_6_len = G_N_ELEMENTS(pc_compat_2_6);
 196
 197GlobalProperty pc_compat_2_5[] = {};
 198const size_t pc_compat_2_5_len = G_N_ELEMENTS(pc_compat_2_5);
 199
 200GlobalProperty pc_compat_2_4[] = {
 201    PC_CPU_MODEL_IDS("2.4.0")
 202    { "Haswell-" TYPE_X86_CPU, "abm", "off" },
 203    { "Haswell-noTSX-" TYPE_X86_CPU, "abm", "off" },
 204    { "Broadwell-" TYPE_X86_CPU, "abm", "off" },
 205    { "Broadwell-noTSX-" TYPE_X86_CPU, "abm", "off" },
 206    { "host" "-" TYPE_X86_CPU, "host-cache-info", "on" },
 207    { TYPE_X86_CPU, "check", "off" },
 208    { "qemu64" "-" TYPE_X86_CPU, "sse4a", "on" },
 209    { "qemu64" "-" TYPE_X86_CPU, "abm", "on" },
 210    { "qemu64" "-" TYPE_X86_CPU, "popcnt", "on" },
 211    { "qemu32" "-" TYPE_X86_CPU, "popcnt", "on" },
 212    { "Opteron_G2" "-" TYPE_X86_CPU, "rdtscp", "on" },
 213    { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "on" },
 214    { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "on" },
 215    { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "on", }
 216};
 217const size_t pc_compat_2_4_len = G_N_ELEMENTS(pc_compat_2_4);
 218
 219GlobalProperty pc_compat_2_3[] = {
 220    PC_CPU_MODEL_IDS("2.3.0")
 221    { TYPE_X86_CPU, "arat", "off" },
 222    { "qemu64" "-" TYPE_X86_CPU, "min-level", "4" },
 223    { "kvm64" "-" TYPE_X86_CPU, "min-level", "5" },
 224    { "pentium3" "-" TYPE_X86_CPU, "min-level", "2" },
 225    { "n270" "-" TYPE_X86_CPU, "min-level", "5" },
 226    { "Conroe" "-" TYPE_X86_CPU, "min-level", "4" },
 227    { "Penryn" "-" TYPE_X86_CPU, "min-level", "4" },
 228    { "Nehalem" "-" TYPE_X86_CPU, "min-level", "4" },
 229    { "n270" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 230    { "Penryn" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 231    { "Conroe" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 232    { "Nehalem" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 233    { "Westmere" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 234    { "SandyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 235    { "IvyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 236    { "Haswell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 237    { "Haswell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 238    { "Broadwell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 239    { "Broadwell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
 240    { TYPE_X86_CPU, "kvm-no-smi-migration", "on" },
 241};
 242const size_t pc_compat_2_3_len = G_N_ELEMENTS(pc_compat_2_3);
 243
 244GlobalProperty pc_compat_2_2[] = {
 245    PC_CPU_MODEL_IDS("2.2.0")
 246    { "kvm64" "-" TYPE_X86_CPU, "vme", "off" },
 247    { "kvm32" "-" TYPE_X86_CPU, "vme", "off" },
 248    { "Conroe" "-" TYPE_X86_CPU, "vme", "off" },
 249    { "Penryn" "-" TYPE_X86_CPU, "vme", "off" },
 250    { "Nehalem" "-" TYPE_X86_CPU, "vme", "off" },
 251    { "Westmere" "-" TYPE_X86_CPU, "vme", "off" },
 252    { "SandyBridge" "-" TYPE_X86_CPU, "vme", "off" },
 253    { "Haswell" "-" TYPE_X86_CPU, "vme", "off" },
 254    { "Broadwell" "-" TYPE_X86_CPU, "vme", "off" },
 255    { "Opteron_G1" "-" TYPE_X86_CPU, "vme", "off" },
 256    { "Opteron_G2" "-" TYPE_X86_CPU, "vme", "off" },
 257    { "Opteron_G3" "-" TYPE_X86_CPU, "vme", "off" },
 258    { "Opteron_G4" "-" TYPE_X86_CPU, "vme", "off" },
 259    { "Opteron_G5" "-" TYPE_X86_CPU, "vme", "off" },
 260    { "Haswell" "-" TYPE_X86_CPU, "f16c", "off" },
 261    { "Haswell" "-" TYPE_X86_CPU, "rdrand", "off" },
 262    { "Broadwell" "-" TYPE_X86_CPU, "f16c", "off" },
 263    { "Broadwell" "-" TYPE_X86_CPU, "rdrand", "off" },
 264};
 265const size_t pc_compat_2_2_len = G_N_ELEMENTS(pc_compat_2_2);
 266
 267GlobalProperty pc_compat_2_1[] = {
 268    PC_CPU_MODEL_IDS("2.1.0")
 269    { "coreduo" "-" TYPE_X86_CPU, "vmx", "on" },
 270    { "core2duo" "-" TYPE_X86_CPU, "vmx", "on" },
 271};
 272const size_t pc_compat_2_1_len = G_N_ELEMENTS(pc_compat_2_1);
 273
 274GlobalProperty pc_compat_2_0[] = {
 275    PC_CPU_MODEL_IDS("2.0.0")
 276    { "virtio-scsi-pci", "any_layout", "off" },
 277    { "PIIX4_PM", "memory-hotplug-support", "off" },
 278    { "apic", "version", "0x11" },
 279    { "nec-usb-xhci", "superspeed-ports-first", "off" },
 280    { "nec-usb-xhci", "force-pcie-endcap", "on" },
 281    { "pci-serial", "prog_if", "0" },
 282    { "pci-serial-2x", "prog_if", "0" },
 283    { "pci-serial-4x", "prog_if", "0" },
 284    { "virtio-net-pci", "guest_announce", "off" },
 285    { "ICH9-LPC", "memory-hotplug-support", "off" },
 286    { "xio3130-downstream", COMPAT_PROP_PCP, "off" },
 287    { "ioh3420", COMPAT_PROP_PCP, "off" },
 288};
 289const size_t pc_compat_2_0_len = G_N_ELEMENTS(pc_compat_2_0);
 290
 291GlobalProperty pc_compat_1_7[] = {
 292    PC_CPU_MODEL_IDS("1.7.0")
 293    { TYPE_USB_DEVICE, "msos-desc", "no" },
 294    { "PIIX4_PM", "acpi-pci-hotplug-with-bridge-support", "off" },
 295    { "hpet", HPET_INTCAP, "4" },
 296};
 297const size_t pc_compat_1_7_len = G_N_ELEMENTS(pc_compat_1_7);
 298
 299GlobalProperty pc_compat_1_6[] = {
 300    PC_CPU_MODEL_IDS("1.6.0")
 301    { "e1000", "mitigation", "off" },
 302    { "qemu64-" TYPE_X86_CPU, "model", "2" },
 303    { "qemu32-" TYPE_X86_CPU, "model", "3" },
 304    { "i440FX-pcihost", "short_root_bus", "1" },
 305    { "q35-pcihost", "short_root_bus", "1" },
 306};
 307const size_t pc_compat_1_6_len = G_N_ELEMENTS(pc_compat_1_6);
 308
 309GlobalProperty pc_compat_1_5[] = {
 310    PC_CPU_MODEL_IDS("1.5.0")
 311    { "Conroe-" TYPE_X86_CPU, "model", "2" },
 312    { "Conroe-" TYPE_X86_CPU, "min-level", "2" },
 313    { "Penryn-" TYPE_X86_CPU, "model", "2" },
 314    { "Penryn-" TYPE_X86_CPU, "min-level", "2" },
 315    { "Nehalem-" TYPE_X86_CPU, "model", "2" },
 316    { "Nehalem-" TYPE_X86_CPU, "min-level", "2" },
 317    { "virtio-net-pci", "any_layout", "off" },
 318    { TYPE_X86_CPU, "pmu", "on" },
 319    { "i440FX-pcihost", "short_root_bus", "0" },
 320    { "q35-pcihost", "short_root_bus", "0" },
 321};
 322const size_t pc_compat_1_5_len = G_N_ELEMENTS(pc_compat_1_5);
 323
 324GlobalProperty pc_compat_1_4[] = {
 325    PC_CPU_MODEL_IDS("1.4.0")
 326    { "scsi-hd", "discard_granularity", "0" },
 327    { "scsi-cd", "discard_granularity", "0" },
 328    { "scsi-disk", "discard_granularity", "0" },
 329    { "ide-hd", "discard_granularity", "0" },
 330    { "ide-cd", "discard_granularity", "0" },
 331    { "ide-drive", "discard_granularity", "0" },
 332    { "virtio-blk-pci", "discard_granularity", "0" },
 333    /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string: */
 334    { "virtio-serial-pci", "vectors", "0xFFFFFFFF" },
 335    { "virtio-net-pci", "ctrl_guest_offloads", "off" },
 336    { "e1000", "romfile", "pxe-e1000.rom" },
 337    { "ne2k_pci", "romfile", "pxe-ne2k_pci.rom" },
 338    { "pcnet", "romfile", "pxe-pcnet.rom" },
 339    { "rtl8139", "romfile", "pxe-rtl8139.rom" },
 340    { "virtio-net-pci", "romfile", "pxe-virtio.rom" },
 341    { "486-" TYPE_X86_CPU, "model", "0" },
 342    { "n270" "-" TYPE_X86_CPU, "movbe", "off" },
 343    { "Westmere" "-" TYPE_X86_CPU, "pclmulqdq", "off" },
 344};
 345const size_t pc_compat_1_4_len = G_N_ELEMENTS(pc_compat_1_4);
 346
 347void gsi_handler(void *opaque, int n, int level)
 348{
 349    GSIState *s = opaque;
 350
 351    DPRINTF("pc: %s GSI %d\n", level ? "raising" : "lowering", n);
 352    if (n < ISA_NUM_IRQS) {
 353        qemu_set_irq(s->i8259_irq[n], level);
 354    }
 355    qemu_set_irq(s->ioapic_irq[n], level);
 356}
 357
 358GSIState *pc_gsi_create(qemu_irq **irqs, bool pci_enabled)
 359{
 360    GSIState *s;
 361
 362    s = g_new0(GSIState, 1);
 363    if (kvm_ioapic_in_kernel()) {
 364        kvm_pc_setup_irq_routing(pci_enabled);
 365        *irqs = qemu_allocate_irqs(kvm_pc_gsi_handler, s, GSI_NUM_PINS);
 366    } else {
 367        *irqs = qemu_allocate_irqs(gsi_handler, s, GSI_NUM_PINS);
 368    }
 369
 370    return s;
 371}
 372
 373static void ioport80_write(void *opaque, hwaddr addr, uint64_t data,
 374                           unsigned size)
 375{
 376}
 377
 378static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size)
 379{
 380    return 0xffffffffffffffffULL;
 381}
 382
 383/* MSDOS compatibility mode FPU exception support */
 384static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data,
 385                           unsigned size)
 386{
 387    if (tcg_enabled()) {
 388        cpu_set_ignne();
 389    }
 390}
 391
 392static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size)
 393{
 394    return 0xffffffffffffffffULL;
 395}
 396
 397/* TSC handling */
 398uint64_t cpu_get_tsc(CPUX86State *env)
 399{
 400    return cpu_get_ticks();
 401}
 402
 403/* IRQ handling */
 404int cpu_get_pic_interrupt(CPUX86State *env)
 405{
 406    X86CPU *cpu = env_archcpu(env);
 407    int intno;
 408
 409    if (!kvm_irqchip_in_kernel()) {
 410        intno = apic_get_interrupt(cpu->apic_state);
 411        if (intno >= 0) {
 412            return intno;
 413        }
 414        /* read the irq from the PIC */
 415        if (!apic_accept_pic_intr(cpu->apic_state)) {
 416            return -1;
 417        }
 418    }
 419
 420    intno = pic_read_irq(isa_pic);
 421    return intno;
 422}
 423
 424static void pic_irq_request(void *opaque, int irq, int level)
 425{
 426    CPUState *cs = first_cpu;
 427    X86CPU *cpu = X86_CPU(cs);
 428
 429    DPRINTF("pic_irqs: %s irq %d\n", level? "raise" : "lower", irq);
 430    if (cpu->apic_state && !kvm_irqchip_in_kernel()) {
 431        CPU_FOREACH(cs) {
 432            cpu = X86_CPU(cs);
 433            if (apic_accept_pic_intr(cpu->apic_state)) {
 434                apic_deliver_pic_intr(cpu->apic_state, level);
 435            }
 436        }
 437    } else {
 438        if (level) {
 439            cpu_interrupt(cs, CPU_INTERRUPT_HARD);
 440        } else {
 441            cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
 442        }
 443    }
 444}
 445
 446/* PC cmos mappings */
 447
 448#define REG_EQUIPMENT_BYTE          0x14
 449
 450int cmos_get_fd_drive_type(FloppyDriveType fd0)
 451{
 452    int val;
 453
 454    switch (fd0) {
 455    case FLOPPY_DRIVE_TYPE_144:
 456        /* 1.44 Mb 3"5 drive */
 457        val = 4;
 458        break;
 459    case FLOPPY_DRIVE_TYPE_288:
 460        /* 2.88 Mb 3"5 drive */
 461        val = 5;
 462        break;
 463    case FLOPPY_DRIVE_TYPE_120:
 464        /* 1.2 Mb 5"5 drive */
 465        val = 2;
 466        break;
 467    case FLOPPY_DRIVE_TYPE_NONE:
 468    default:
 469        val = 0;
 470        break;
 471    }
 472    return val;
 473}
 474
 475static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs,
 476                         int16_t cylinders, int8_t heads, int8_t sectors)
 477{
 478    rtc_set_memory(s, type_ofs, 47);
 479    rtc_set_memory(s, info_ofs, cylinders);
 480    rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
 481    rtc_set_memory(s, info_ofs + 2, heads);
 482    rtc_set_memory(s, info_ofs + 3, 0xff);
 483    rtc_set_memory(s, info_ofs + 4, 0xff);
 484    rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
 485    rtc_set_memory(s, info_ofs + 6, cylinders);
 486    rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
 487    rtc_set_memory(s, info_ofs + 8, sectors);
 488}
 489
 490/* convert boot_device letter to something recognizable by the bios */
 491static int boot_device2nibble(char boot_device)
 492{
 493    switch(boot_device) {
 494    case 'a':
 495    case 'b':
 496        return 0x01; /* floppy boot */
 497    case 'c':
 498        return 0x02; /* hard drive boot */
 499    case 'd':
 500        return 0x03; /* CD-ROM boot */
 501    case 'n':
 502        return 0x04; /* Network boot */
 503    }
 504    return 0;
 505}
 506
 507static void set_boot_dev(ISADevice *s, const char *boot_device, Error **errp)
 508{
 509#define PC_MAX_BOOT_DEVICES 3
 510    int nbds, bds[3] = { 0, };
 511    int i;
 512
 513    nbds = strlen(boot_device);
 514    if (nbds > PC_MAX_BOOT_DEVICES) {
 515        error_setg(errp, "Too many boot devices for PC");
 516        return;
 517    }
 518    for (i = 0; i < nbds; i++) {
 519        bds[i] = boot_device2nibble(boot_device[i]);
 520        if (bds[i] == 0) {
 521            error_setg(errp, "Invalid boot device for PC: '%c'",
 522                       boot_device[i]);
 523            return;
 524        }
 525    }
 526    rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
 527    rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
 528}
 529
 530static void pc_boot_set(void *opaque, const char *boot_device, Error **errp)
 531{
 532    set_boot_dev(opaque, boot_device, errp);
 533}
 534
 535static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy)
 536{
 537    int val, nb, i;
 538    FloppyDriveType fd_type[2] = { FLOPPY_DRIVE_TYPE_NONE,
 539                                   FLOPPY_DRIVE_TYPE_NONE };
 540
 541    /* floppy type */
 542    if (floppy) {
 543        for (i = 0; i < 2; i++) {
 544            fd_type[i] = isa_fdc_get_drive_type(floppy, i);
 545        }
 546    }
 547    val = (cmos_get_fd_drive_type(fd_type[0]) << 4) |
 548        cmos_get_fd_drive_type(fd_type[1]);
 549    rtc_set_memory(rtc_state, 0x10, val);
 550
 551    val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE);
 552    nb = 0;
 553    if (fd_type[0] != FLOPPY_DRIVE_TYPE_NONE) {
 554        nb++;
 555    }
 556    if (fd_type[1] != FLOPPY_DRIVE_TYPE_NONE) {
 557        nb++;
 558    }
 559    switch (nb) {
 560    case 0:
 561        break;
 562    case 1:
 563        val |= 0x01; /* 1 drive, ready for boot */
 564        break;
 565    case 2:
 566        val |= 0x41; /* 2 drives, ready for boot */
 567        break;
 568    }
 569    rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val);
 570}
 571
 572typedef struct pc_cmos_init_late_arg {
 573    ISADevice *rtc_state;
 574    BusState *idebus[2];
 575} pc_cmos_init_late_arg;
 576
 577typedef struct check_fdc_state {
 578    ISADevice *floppy;
 579    bool multiple;
 580} CheckFdcState;
 581
 582static int check_fdc(Object *obj, void *opaque)
 583{
 584    CheckFdcState *state = opaque;
 585    Object *fdc;
 586    uint32_t iobase;
 587    Error *local_err = NULL;
 588
 589    fdc = object_dynamic_cast(obj, TYPE_ISA_FDC);
 590    if (!fdc) {
 591        return 0;
 592    }
 593
 594    iobase = object_property_get_uint(obj, "iobase", &local_err);
 595    if (local_err || iobase != 0x3f0) {
 596        error_free(local_err);
 597        return 0;
 598    }
 599
 600    if (state->floppy) {
 601        state->multiple = true;
 602    } else {
 603        state->floppy = ISA_DEVICE(obj);
 604    }
 605    return 0;
 606}
 607
 608static const char * const fdc_container_path[] = {
 609    "/unattached", "/peripheral", "/peripheral-anon"
 610};
 611
 612/*
 613 * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers
 614 * and ACPI objects.
 615 */
 616ISADevice *pc_find_fdc0(void)
 617{
 618    int i;
 619    Object *container;
 620    CheckFdcState state = { 0 };
 621
 622    for (i = 0; i < ARRAY_SIZE(fdc_container_path); i++) {
 623        container = container_get(qdev_get_machine(), fdc_container_path[i]);
 624        object_child_foreach(container, check_fdc, &state);
 625    }
 626
 627    if (state.multiple) {
 628        warn_report("multiple floppy disk controllers with "
 629                    "iobase=0x3f0 have been found");
 630        error_printf("the one being picked for CMOS setup might not reflect "
 631                     "your intent");
 632    }
 633
 634    return state.floppy;
 635}
 636
 637static void pc_cmos_init_late(void *opaque)
 638{
 639    pc_cmos_init_late_arg *arg = opaque;
 640    ISADevice *s = arg->rtc_state;
 641    int16_t cylinders;
 642    int8_t heads, sectors;
 643    int val;
 644    int i, trans;
 645
 646    val = 0;
 647    if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 0,
 648                                           &cylinders, &heads, &sectors) >= 0) {
 649        cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors);
 650        val |= 0xf0;
 651    }
 652    if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 1,
 653                                           &cylinders, &heads, &sectors) >= 0) {
 654        cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors);
 655        val |= 0x0f;
 656    }
 657    rtc_set_memory(s, 0x12, val);
 658
 659    val = 0;
 660    for (i = 0; i < 4; i++) {
 661        /* NOTE: ide_get_geometry() returns the physical
 662           geometry.  It is always such that: 1 <= sects <= 63, 1
 663           <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
 664           geometry can be different if a translation is done. */
 665        if (arg->idebus[i / 2] &&
 666            ide_get_geometry(arg->idebus[i / 2], i % 2,
 667                             &cylinders, &heads, &sectors) >= 0) {
 668            trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1;
 669            assert((trans & ~3) == 0);
 670            val |= trans << (i * 2);
 671        }
 672    }
 673    rtc_set_memory(s, 0x39, val);
 674
 675    pc_cmos_init_floppy(s, pc_find_fdc0());
 676
 677    qemu_unregister_reset(pc_cmos_init_late, opaque);
 678}
 679
 680void pc_cmos_init(PCMachineState *pcms,
 681                  BusState *idebus0, BusState *idebus1,
 682                  ISADevice *s)
 683{
 684    int val;
 685    static pc_cmos_init_late_arg arg;
 686    X86MachineState *x86ms = X86_MACHINE(pcms);
 687
 688    /* various important CMOS locations needed by PC/Bochs bios */
 689
 690    /* memory size */
 691    /* base memory (first MiB) */
 692    val = MIN(x86ms->below_4g_mem_size / KiB, 640);
 693    rtc_set_memory(s, 0x15, val);
 694    rtc_set_memory(s, 0x16, val >> 8);
 695    /* extended memory (next 64MiB) */
 696    if (x86ms->below_4g_mem_size > 1 * MiB) {
 697        val = (x86ms->below_4g_mem_size - 1 * MiB) / KiB;
 698    } else {
 699        val = 0;
 700    }
 701    if (val > 65535)
 702        val = 65535;
 703    rtc_set_memory(s, 0x17, val);
 704    rtc_set_memory(s, 0x18, val >> 8);
 705    rtc_set_memory(s, 0x30, val);
 706    rtc_set_memory(s, 0x31, val >> 8);
 707    /* memory between 16MiB and 4GiB */
 708    if (x86ms->below_4g_mem_size > 16 * MiB) {
 709        val = (x86ms->below_4g_mem_size - 16 * MiB) / (64 * KiB);
 710    } else {
 711        val = 0;
 712    }
 713    if (val > 65535)
 714        val = 65535;
 715    rtc_set_memory(s, 0x34, val);
 716    rtc_set_memory(s, 0x35, val >> 8);
 717    /* memory above 4GiB */
 718    val = x86ms->above_4g_mem_size / 65536;
 719    rtc_set_memory(s, 0x5b, val);
 720    rtc_set_memory(s, 0x5c, val >> 8);
 721    rtc_set_memory(s, 0x5d, val >> 16);
 722
 723    object_property_add_link(OBJECT(pcms), "rtc_state",
 724                             TYPE_ISA_DEVICE,
 725                             (Object **)&x86ms->rtc,
 726                             object_property_allow_set_link,
 727                             OBJ_PROP_LINK_STRONG, &error_abort);
 728    object_property_set_link(OBJECT(pcms), OBJECT(s),
 729                             "rtc_state", &error_abort);
 730
 731    set_boot_dev(s, MACHINE(pcms)->boot_order, &error_fatal);
 732
 733    val = 0;
 734    val |= 0x02; /* FPU is there */
 735    val |= 0x04; /* PS/2 mouse installed */
 736    rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
 737
 738    /* hard drives and FDC */
 739    arg.rtc_state = s;
 740    arg.idebus[0] = idebus0;
 741    arg.idebus[1] = idebus1;
 742    qemu_register_reset(pc_cmos_init_late, &arg);
 743}
 744
 745#define TYPE_PORT92 "port92"
 746#define PORT92(obj) OBJECT_CHECK(Port92State, (obj), TYPE_PORT92)
 747
 748/* port 92 stuff: could be split off */
 749typedef struct Port92State {
 750    ISADevice parent_obj;
 751
 752    MemoryRegion io;
 753    uint8_t outport;
 754    qemu_irq a20_out;
 755} Port92State;
 756
 757static void port92_write(void *opaque, hwaddr addr, uint64_t val,
 758                         unsigned size)
 759{
 760    Port92State *s = opaque;
 761    int oldval = s->outport;
 762
 763    DPRINTF("port92: write 0x%02" PRIx64 "\n", val);
 764    s->outport = val;
 765    qemu_set_irq(s->a20_out, (val >> 1) & 1);
 766    if ((val & 1) && !(oldval & 1)) {
 767        qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
 768    }
 769}
 770
 771static uint64_t port92_read(void *opaque, hwaddr addr,
 772                            unsigned size)
 773{
 774    Port92State *s = opaque;
 775    uint32_t ret;
 776
 777    ret = s->outport;
 778    DPRINTF("port92: read 0x%02x\n", ret);
 779    return ret;
 780}
 781
 782static void port92_init(ISADevice *dev, qemu_irq a20_out)
 783{
 784    qdev_connect_gpio_out_named(DEVICE(dev), PORT92_A20_LINE, 0, a20_out);
 785}
 786
 787static const VMStateDescription vmstate_port92_isa = {
 788    .name = "port92",
 789    .version_id = 1,
 790    .minimum_version_id = 1,
 791    .fields = (VMStateField[]) {
 792        VMSTATE_UINT8(outport, Port92State),
 793        VMSTATE_END_OF_LIST()
 794    }
 795};
 796
 797static void port92_reset(DeviceState *d)
 798{
 799    Port92State *s = PORT92(d);
 800
 801    s->outport &= ~1;
 802}
 803
 804static const MemoryRegionOps port92_ops = {
 805    .read = port92_read,
 806    .write = port92_write,
 807    .impl = {
 808        .min_access_size = 1,
 809        .max_access_size = 1,
 810    },
 811    .endianness = DEVICE_LITTLE_ENDIAN,
 812};
 813
 814static void port92_initfn(Object *obj)
 815{
 816    Port92State *s = PORT92(obj);
 817
 818    memory_region_init_io(&s->io, OBJECT(s), &port92_ops, s, "port92", 1);
 819
 820    s->outport = 0;
 821
 822    qdev_init_gpio_out_named(DEVICE(obj), &s->a20_out, PORT92_A20_LINE, 1);
 823}
 824
 825static void port92_realizefn(DeviceState *dev, Error **errp)
 826{
 827    ISADevice *isadev = ISA_DEVICE(dev);
 828    Port92State *s = PORT92(dev);
 829
 830    isa_register_ioport(isadev, &s->io, 0x92);
 831}
 832
 833static void port92_class_initfn(ObjectClass *klass, void *data)
 834{
 835    DeviceClass *dc = DEVICE_CLASS(klass);
 836
 837    dc->realize = port92_realizefn;
 838    dc->reset = port92_reset;
 839    dc->vmsd = &vmstate_port92_isa;
 840    /*
 841     * Reason: unlike ordinary ISA devices, this one needs additional
 842     * wiring: its A20 output line needs to be wired up by
 843     * port92_init().
 844     */
 845    dc->user_creatable = false;
 846}
 847
 848static const TypeInfo port92_info = {
 849    .name          = TYPE_PORT92,
 850    .parent        = TYPE_ISA_DEVICE,
 851    .instance_size = sizeof(Port92State),
 852    .instance_init = port92_initfn,
 853    .class_init    = port92_class_initfn,
 854};
 855
 856static void port92_register_types(void)
 857{
 858    type_register_static(&port92_info);
 859}
 860
 861type_init(port92_register_types)
 862
 863static void handle_a20_line_change(void *opaque, int irq, int level)
 864{
 865    X86CPU *cpu = opaque;
 866
 867    /* XXX: send to all CPUs ? */
 868    /* XXX: add logic to handle multiple A20 line sources */
 869    x86_cpu_set_a20(cpu, level);
 870}
 871
 872#define NE2000_NB_MAX 6
 873
 874static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360,
 875                                              0x280, 0x380 };
 876static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
 877
 878void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd)
 879{
 880    static int nb_ne2k = 0;
 881
 882    if (nb_ne2k == NE2000_NB_MAX)
 883        return;
 884    isa_ne2000_init(bus, ne2000_io[nb_ne2k],
 885                    ne2000_irq[nb_ne2k], nd);
 886    nb_ne2k++;
 887}
 888
 889DeviceState *cpu_get_current_apic(void)
 890{
 891    if (current_cpu) {
 892        X86CPU *cpu = X86_CPU(current_cpu);
 893        return cpu->apic_state;
 894    } else {
 895        return NULL;
 896    }
 897}
 898
 899void pc_acpi_smi_interrupt(void *opaque, int irq, int level)
 900{
 901    X86CPU *cpu = opaque;
 902
 903    if (level) {
 904        cpu_interrupt(CPU(cpu), CPU_INTERRUPT_SMI);
 905    }
 906}
 907
 908/*
 909 * This function is very similar to smp_parse()
 910 * in hw/core/machine.c but includes CPU die support.
 911 */
 912void pc_smp_parse(MachineState *ms, QemuOpts *opts)
 913{
 914    X86MachineState *x86ms = X86_MACHINE(ms);
 915
 916    if (opts) {
 917        unsigned cpus    = qemu_opt_get_number(opts, "cpus", 0);
 918        unsigned sockets = qemu_opt_get_number(opts, "sockets", 0);
 919        unsigned dies = qemu_opt_get_number(opts, "dies", 1);
 920        unsigned cores   = qemu_opt_get_number(opts, "cores", 0);
 921        unsigned threads = qemu_opt_get_number(opts, "threads", 0);
 922
 923        /* compute missing values, prefer sockets over cores over threads */
 924        if (cpus == 0 || sockets == 0) {
 925            cores = cores > 0 ? cores : 1;
 926            threads = threads > 0 ? threads : 1;
 927            if (cpus == 0) {
 928                sockets = sockets > 0 ? sockets : 1;
 929                cpus = cores * threads * dies * sockets;
 930            } else {
 931                ms->smp.max_cpus =
 932                        qemu_opt_get_number(opts, "maxcpus", cpus);
 933                sockets = ms->smp.max_cpus / (cores * threads * dies);
 934            }
 935        } else if (cores == 0) {
 936            threads = threads > 0 ? threads : 1;
 937            cores = cpus / (sockets * dies * threads);
 938            cores = cores > 0 ? cores : 1;
 939        } else if (threads == 0) {
 940            threads = cpus / (cores * dies * sockets);
 941            threads = threads > 0 ? threads : 1;
 942        } else if (sockets * dies * cores * threads < cpus) {
 943            error_report("cpu topology: "
 944                         "sockets (%u) * dies (%u) * cores (%u) * threads (%u) < "
 945                         "smp_cpus (%u)",
 946                         sockets, dies, cores, threads, cpus);
 947            exit(1);
 948        }
 949
 950        ms->smp.max_cpus =
 951                qemu_opt_get_number(opts, "maxcpus", cpus);
 952
 953        if (ms->smp.max_cpus < cpus) {
 954            error_report("maxcpus must be equal to or greater than smp");
 955            exit(1);
 956        }
 957
 958        if (sockets * dies * cores * threads > ms->smp.max_cpus) {
 959            error_report("cpu topology: "
 960                         "sockets (%u) * dies (%u) * cores (%u) * threads (%u) > "
 961                         "maxcpus (%u)",
 962                         sockets, dies, cores, threads,
 963                         ms->smp.max_cpus);
 964            exit(1);
 965        }
 966
 967        if (sockets * dies * cores * threads != ms->smp.max_cpus) {
 968            warn_report("Invalid CPU topology deprecated: "
 969                        "sockets (%u) * dies (%u) * cores (%u) * threads (%u) "
 970                        "!= maxcpus (%u)",
 971                        sockets, dies, cores, threads,
 972                        ms->smp.max_cpus);
 973        }
 974
 975        ms->smp.cpus = cpus;
 976        ms->smp.cores = cores;
 977        ms->smp.threads = threads;
 978        x86ms->smp_dies = dies;
 979    }
 980
 981    if (ms->smp.cpus > 1) {
 982        Error *blocker = NULL;
 983        error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED, "smp");
 984        replay_add_blocker(blocker);
 985    }
 986}
 987
 988void pc_hot_add_cpu(MachineState *ms, const int64_t id, Error **errp)
 989{
 990    X86MachineState *x86ms = X86_MACHINE(ms);
 991    int64_t apic_id = x86_cpu_apic_id_from_index(x86ms, id);
 992    Error *local_err = NULL;
 993
 994    if (id < 0) {
 995        error_setg(errp, "Invalid CPU id: %" PRIi64, id);
 996        return;
 997    }
 998
 999    if (apic_id >= ACPI_CPU_HOTPLUG_ID_LIMIT) {
1000        error_setg(errp, "Unable to add CPU: %" PRIi64
1001                   ", resulting APIC ID (%" PRIi64 ") is too large",
1002                   id, apic_id);
1003        return;
1004    }
1005
1006
1007    x86_cpu_new(X86_MACHINE(ms), apic_id, &local_err);
1008    if (local_err) {
1009        error_propagate(errp, local_err);
1010        return;
1011    }
1012}
1013
1014static void rtc_set_cpus_count(ISADevice *rtc, uint16_t cpus_count)
1015{
1016    if (cpus_count > 0xff) {
1017        /* If the number of CPUs can't be represented in 8 bits, the
1018         * BIOS must use "FW_CFG_NB_CPUS". Set RTC field to 0 just
1019         * to make old BIOSes fail more predictably.
1020         */
1021        rtc_set_memory(rtc, 0x5f, 0);
1022    } else {
1023        rtc_set_memory(rtc, 0x5f, cpus_count - 1);
1024    }
1025}
1026
1027static
1028void pc_machine_done(Notifier *notifier, void *data)
1029{
1030    PCMachineState *pcms = container_of(notifier,
1031                                        PCMachineState, machine_done);
1032    X86MachineState *x86ms = X86_MACHINE(pcms);
1033    PCIBus *bus = pcms->bus;
1034
1035    /* set the number of CPUs */
1036    rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus);
1037
1038    if (bus) {
1039        int extra_hosts = 0;
1040
1041        QLIST_FOREACH(bus, &bus->child, sibling) {
1042            /* look for expander root buses */
1043            if (pci_bus_is_root(bus)) {
1044                extra_hosts++;
1045            }
1046        }
1047        if (extra_hosts && x86ms->fw_cfg) {
1048            uint64_t *val = g_malloc(sizeof(*val));
1049            *val = cpu_to_le64(extra_hosts);
1050            fw_cfg_add_file(x86ms->fw_cfg,
1051                    "etc/extra-pci-roots", val, sizeof(*val));
1052        }
1053    }
1054
1055    acpi_setup();
1056    if (x86ms->fw_cfg) {
1057        fw_cfg_build_smbios(MACHINE(pcms), x86ms->fw_cfg);
1058        fw_cfg_build_feature_control(MACHINE(pcms), x86ms->fw_cfg);
1059        /* update FW_CFG_NB_CPUS to account for -device added CPUs */
1060        fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus);
1061    }
1062
1063    if (x86ms->apic_id_limit > 255 && !xen_enabled()) {
1064        IntelIOMMUState *iommu = INTEL_IOMMU_DEVICE(x86_iommu_get_default());
1065
1066        if (!iommu || !x86_iommu_ir_supported(X86_IOMMU_DEVICE(iommu)) ||
1067            iommu->intr_eim != ON_OFF_AUTO_ON) {
1068            error_report("current -smp configuration requires "
1069                         "Extended Interrupt Mode enabled. "
1070                         "You can add an IOMMU using: "
1071                         "-device intel-iommu,intremap=on,eim=on");
1072            exit(EXIT_FAILURE);
1073        }
1074    }
1075}
1076
1077void pc_guest_info_init(PCMachineState *pcms)
1078{
1079    int i;
1080    MachineState *ms = MACHINE(pcms);
1081    X86MachineState *x86ms = X86_MACHINE(pcms);
1082
1083    x86ms->apic_xrupt_override = kvm_allows_irq0_override();
1084    pcms->numa_nodes = ms->numa_state->num_nodes;
1085    pcms->node_mem = g_malloc0(pcms->numa_nodes *
1086                                    sizeof *pcms->node_mem);
1087    for (i = 0; i < ms->numa_state->num_nodes; i++) {
1088        pcms->node_mem[i] = ms->numa_state->nodes[i].node_mem;
1089    }
1090
1091    pcms->machine_done.notify = pc_machine_done;
1092    qemu_add_machine_init_done_notifier(&pcms->machine_done);
1093}
1094
1095/* setup pci memory address space mapping into system address space */
1096void pc_pci_as_mapping_init(Object *owner, MemoryRegion *system_memory,
1097                            MemoryRegion *pci_address_space)
1098{
1099    /* Set to lower priority than RAM */
1100    memory_region_add_subregion_overlap(system_memory, 0x0,
1101                                        pci_address_space, -1);
1102}
1103
1104void xen_load_linux(PCMachineState *pcms)
1105{
1106    int i;
1107    FWCfgState *fw_cfg;
1108    PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
1109    X86MachineState *x86ms = X86_MACHINE(pcms);
1110
1111    assert(MACHINE(pcms)->kernel_filename != NULL);
1112
1113    fw_cfg = fw_cfg_init_io(FW_CFG_IO_BASE);
1114    fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus);
1115    rom_set_fw(fw_cfg);
1116
1117    x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size,
1118                   pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled);
1119    for (i = 0; i < nb_option_roms; i++) {
1120        assert(!strcmp(option_rom[i].name, "linuxboot.bin") ||
1121               !strcmp(option_rom[i].name, "linuxboot_dma.bin") ||
1122               !strcmp(option_rom[i].name, "pvh.bin") ||
1123               !strcmp(option_rom[i].name, "multiboot.bin"));
1124        rom_add_option(option_rom[i].name, option_rom[i].bootindex);
1125    }
1126    x86ms->fw_cfg = fw_cfg;
1127}
1128
1129void pc_memory_init(PCMachineState *pcms,
1130                    MemoryRegion *system_memory,
1131                    MemoryRegion *rom_memory,
1132                    MemoryRegion **ram_memory)
1133{
1134    int linux_boot, i;
1135    MemoryRegion *ram, *option_rom_mr;
1136    MemoryRegion *ram_below_4g, *ram_above_4g;
1137    FWCfgState *fw_cfg;
1138    MachineState *machine = MACHINE(pcms);
1139    MachineClass *mc = MACHINE_GET_CLASS(machine);
1140    PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
1141    X86MachineState *x86ms = X86_MACHINE(pcms);
1142
1143    assert(machine->ram_size == x86ms->below_4g_mem_size +
1144                                x86ms->above_4g_mem_size);
1145
1146    linux_boot = (machine->kernel_filename != NULL);
1147
1148    /* Allocate RAM.  We allocate it as a single memory region and use
1149     * aliases to address portions of it, mostly for backwards compatibility
1150     * with older qemus that used qemu_ram_alloc().
1151     */
1152    ram = g_malloc(sizeof(*ram));
1153    memory_region_allocate_system_memory(ram, NULL, "pc.ram",
1154                                         machine->ram_size);
1155    *ram_memory = ram;
1156    ram_below_4g = g_malloc(sizeof(*ram_below_4g));
1157    memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", ram,
1158                             0, x86ms->below_4g_mem_size);
1159    memory_region_add_subregion(system_memory, 0, ram_below_4g);
1160    e820_add_entry(0, x86ms->below_4g_mem_size, E820_RAM);
1161    if (x86ms->above_4g_mem_size > 0) {
1162        ram_above_4g = g_malloc(sizeof(*ram_above_4g));
1163        memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g", ram,
1164                                 x86ms->below_4g_mem_size,
1165                                 x86ms->above_4g_mem_size);
1166        memory_region_add_subregion(system_memory, 0x100000000ULL,
1167                                    ram_above_4g);
1168        e820_add_entry(0x100000000ULL, x86ms->above_4g_mem_size, E820_RAM);
1169    }
1170
1171    if (!pcmc->has_reserved_memory &&
1172        (machine->ram_slots ||
1173         (machine->maxram_size > machine->ram_size))) {
1174
1175        error_report("\"-memory 'slots|maxmem'\" is not supported by: %s",
1176                     mc->name);
1177        exit(EXIT_FAILURE);
1178    }
1179
1180    /* always allocate the device memory information */
1181    machine->device_memory = g_malloc0(sizeof(*machine->device_memory));
1182
1183    /* initialize device memory address space */
1184    if (pcmc->has_reserved_memory &&
1185        (machine->ram_size < machine->maxram_size)) {
1186        ram_addr_t device_mem_size = machine->maxram_size - machine->ram_size;
1187
1188        if (machine->ram_slots > ACPI_MAX_RAM_SLOTS) {
1189            error_report("unsupported amount of memory slots: %"PRIu64,
1190                         machine->ram_slots);
1191            exit(EXIT_FAILURE);
1192        }
1193
1194        if (QEMU_ALIGN_UP(machine->maxram_size,
1195                          TARGET_PAGE_SIZE) != machine->maxram_size) {
1196            error_report("maximum memory size must by aligned to multiple of "
1197                         "%d bytes", TARGET_PAGE_SIZE);
1198            exit(EXIT_FAILURE);
1199        }
1200
1201        machine->device_memory->base =
1202            ROUND_UP(0x100000000ULL + x86ms->above_4g_mem_size, 1 * GiB);
1203
1204        if (pcmc->enforce_aligned_dimm) {
1205            /* size device region assuming 1G page max alignment per slot */
1206            device_mem_size += (1 * GiB) * machine->ram_slots;
1207        }
1208
1209        if ((machine->device_memory->base + device_mem_size) <
1210            device_mem_size) {
1211            error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT,
1212                         machine->maxram_size);
1213            exit(EXIT_FAILURE);
1214        }
1215
1216        memory_region_init(&machine->device_memory->mr, OBJECT(pcms),
1217                           "device-memory", device_mem_size);
1218        memory_region_add_subregion(system_memory, machine->device_memory->base,
1219                                    &machine->device_memory->mr);
1220    }
1221
1222    /* Initialize PC system firmware */
1223    pc_system_firmware_init(pcms, rom_memory);
1224
1225    option_rom_mr = g_malloc(sizeof(*option_rom_mr));
1226    memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE,
1227                           &error_fatal);
1228    if (pcmc->pci_enabled) {
1229        memory_region_set_readonly(option_rom_mr, true);
1230    }
1231    memory_region_add_subregion_overlap(rom_memory,
1232                                        PC_ROM_MIN_VGA,
1233                                        option_rom_mr,
1234                                        1);
1235
1236    fw_cfg = fw_cfg_arch_create(machine,
1237                                x86ms->boot_cpus, x86ms->apic_id_limit);
1238
1239    rom_set_fw(fw_cfg);
1240
1241    if (pcmc->has_reserved_memory && machine->device_memory->base) {
1242        uint64_t *val = g_malloc(sizeof(*val));
1243        PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
1244        uint64_t res_mem_end = machine->device_memory->base;
1245
1246        if (!pcmc->broken_reserved_end) {
1247            res_mem_end += memory_region_size(&machine->device_memory->mr);
1248        }
1249        *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
1250        fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val));
1251    }
1252
1253    if (linux_boot) {
1254        x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size,
1255                       pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled);
1256    }
1257
1258    for (i = 0; i < nb_option_roms; i++) {
1259        rom_add_option(option_rom[i].name, option_rom[i].bootindex);
1260    }
1261    x86ms->fw_cfg = fw_cfg;
1262
1263    /* Init default IOAPIC address space */
1264    x86ms->ioapic_as = &address_space_memory;
1265
1266    /* Init ACPI memory hotplug IO base address */
1267    pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE;
1268}
1269
1270/*
1271 * The 64bit pci hole starts after "above 4G RAM" and
1272 * potentially the space reserved for memory hotplug.
1273 */
1274uint64_t pc_pci_hole64_start(void)
1275{
1276    PCMachineState *pcms = PC_MACHINE(qdev_get_machine());
1277    PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
1278    MachineState *ms = MACHINE(pcms);
1279    X86MachineState *x86ms = X86_MACHINE(pcms);
1280    uint64_t hole64_start = 0;
1281
1282    if (pcmc->has_reserved_memory && ms->device_memory->base) {
1283        hole64_start = ms->device_memory->base;
1284        if (!pcmc->broken_reserved_end) {
1285            hole64_start += memory_region_size(&ms->device_memory->mr);
1286        }
1287    } else {
1288        hole64_start = 0x100000000ULL + x86ms->above_4g_mem_size;
1289    }
1290
1291    return ROUND_UP(hole64_start, 1 * GiB);
1292}
1293
1294qemu_irq pc_allocate_cpu_irq(void)
1295{
1296    return qemu_allocate_irq(pic_irq_request, NULL, 0);
1297}
1298
1299DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus)
1300{
1301    DeviceState *dev = NULL;
1302
1303    rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA);
1304    if (pci_bus) {
1305        PCIDevice *pcidev = pci_vga_init(pci_bus);
1306        dev = pcidev ? &pcidev->qdev : NULL;
1307    } else if (isa_bus) {
1308        ISADevice *isadev = isa_vga_init(isa_bus);
1309        dev = isadev ? DEVICE(isadev) : NULL;
1310    }
1311    rom_reset_order_override();
1312    return dev;
1313}
1314
1315static const MemoryRegionOps ioport80_io_ops = {
1316    .write = ioport80_write,
1317    .read = ioport80_read,
1318    .endianness = DEVICE_NATIVE_ENDIAN,
1319    .impl = {
1320        .min_access_size = 1,
1321        .max_access_size = 1,
1322    },
1323};
1324
1325static const MemoryRegionOps ioportF0_io_ops = {
1326    .write = ioportF0_write,
1327    .read = ioportF0_read,
1328    .endianness = DEVICE_NATIVE_ENDIAN,
1329    .impl = {
1330        .min_access_size = 1,
1331        .max_access_size = 1,
1332    },
1333};
1334
1335static void pc_superio_init(ISABus *isa_bus, bool create_fdctrl, bool no_vmport)
1336{
1337    int i;
1338    DriveInfo *fd[MAX_FD];
1339    qemu_irq *a20_line;
1340    ISADevice *i8042, *port92, *vmmouse;
1341
1342    serial_hds_isa_init(isa_bus, 0, MAX_ISA_SERIAL_PORTS);
1343    parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS);
1344
1345    for (i = 0; i < MAX_FD; i++) {
1346        fd[i] = drive_get(IF_FLOPPY, 0, i);
1347        create_fdctrl |= !!fd[i];
1348    }
1349    if (create_fdctrl) {
1350        fdctrl_init_isa(isa_bus, fd);
1351    }
1352
1353    i8042 = isa_create_simple(isa_bus, "i8042");
1354    if (!no_vmport) {
1355        vmport_init(isa_bus);
1356        vmmouse = isa_try_create(isa_bus, "vmmouse");
1357    } else {
1358        vmmouse = NULL;
1359    }
1360    if (vmmouse) {
1361        DeviceState *dev = DEVICE(vmmouse);
1362        qdev_prop_set_ptr(dev, "ps2_mouse", i8042);
1363        qdev_init_nofail(dev);
1364    }
1365    port92 = isa_create_simple(isa_bus, "port92");
1366
1367    a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2);
1368    i8042_setup_a20_line(i8042, a20_line[0]);
1369    port92_init(port92, a20_line[1]);
1370    g_free(a20_line);
1371}
1372
1373void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,
1374                          ISADevice **rtc_state,
1375                          bool create_fdctrl,
1376                          bool no_vmport,
1377                          bool has_pit,
1378                          uint32_t hpet_irqs)
1379{
1380    int i;
1381    DeviceState *hpet = NULL;
1382    int pit_isa_irq = 0;
1383    qemu_irq pit_alt_irq = NULL;
1384    qemu_irq rtc_irq = NULL;
1385    ISADevice *pit = NULL;
1386    MemoryRegion *ioport80_io = g_new(MemoryRegion, 1);
1387    MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1);
1388
1389    memory_region_init_io(ioport80_io, NULL, &ioport80_io_ops, NULL, "ioport80", 1);
1390    memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io);
1391
1392    memory_region_init_io(ioportF0_io, NULL, &ioportF0_io_ops, NULL, "ioportF0", 1);
1393    memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io);
1394
1395    /*
1396     * Check if an HPET shall be created.
1397     *
1398     * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT
1399     * when the HPET wants to take over. Thus we have to disable the latter.
1400     */
1401    if (!no_hpet && (!kvm_irqchip_in_kernel() || kvm_has_pit_state2())) {
1402        /* In order to set property, here not using sysbus_try_create_simple */
1403        hpet = qdev_try_create(NULL, TYPE_HPET);
1404        if (hpet) {
1405            /* For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7
1406             * and earlier, use IRQ2 for compat. Otherwise, use IRQ16~23,
1407             * IRQ8 and IRQ2.
1408             */
1409            uint8_t compat = object_property_get_uint(OBJECT(hpet),
1410                    HPET_INTCAP, NULL);
1411            if (!compat) {
1412                qdev_prop_set_uint32(hpet, HPET_INTCAP, hpet_irqs);
1413            }
1414            qdev_init_nofail(hpet);
1415            sysbus_mmio_map(SYS_BUS_DEVICE(hpet), 0, HPET_BASE);
1416
1417            for (i = 0; i < GSI_NUM_PINS; i++) {
1418                sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]);
1419            }
1420            pit_isa_irq = -1;
1421            pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT);
1422            rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT);
1423        }
1424    }
1425    *rtc_state = mc146818_rtc_init(isa_bus, 2000, rtc_irq);
1426
1427    qemu_register_boot_set(pc_boot_set, *rtc_state);
1428
1429    if (!xen_enabled() && has_pit) {
1430        if (kvm_pit_in_kernel()) {
1431            pit = kvm_pit_init(isa_bus, 0x40);
1432        } else {
1433            pit = i8254_pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq);
1434        }
1435        if (hpet) {
1436            /* connect PIT to output control line of the HPET */
1437            qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(DEVICE(pit), 0));
1438        }
1439        pcspk_init(isa_bus, pit);
1440    }
1441
1442    i8257_dma_init(isa_bus, 0);
1443
1444    /* Super I/O */
1445    pc_superio_init(isa_bus, create_fdctrl, no_vmport);
1446}
1447
1448void pc_nic_init(PCMachineClass *pcmc, ISABus *isa_bus, PCIBus *pci_bus)
1449{
1450    int i;
1451
1452    rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC);
1453    for (i = 0; i < nb_nics; i++) {
1454        NICInfo *nd = &nd_table[i];
1455        const char *model = nd->model ? nd->model : pcmc->default_nic_model;
1456
1457        if (g_str_equal(model, "ne2k_isa")) {
1458            pc_init_ne2k_isa(isa_bus, nd);
1459        } else {
1460            pci_nic_init_nofail(nd, pci_bus, model, NULL);
1461        }
1462    }
1463    rom_reset_order_override();
1464}
1465
1466void pc_i8259_create(ISABus *isa_bus, qemu_irq *i8259_irqs)
1467{
1468    qemu_irq *i8259;
1469
1470    if (kvm_pic_in_kernel()) {
1471        i8259 = kvm_i8259_init(isa_bus);
1472    } else if (xen_enabled()) {
1473        i8259 = xen_interrupt_controller_init();
1474    } else {
1475        i8259 = i8259_init(isa_bus, pc_allocate_cpu_irq());
1476    }
1477
1478    for (size_t i = 0; i < ISA_NUM_IRQS; i++) {
1479        i8259_irqs[i] = i8259[i];
1480    }
1481
1482    g_free(i8259);
1483}
1484
1485void ioapic_init_gsi(GSIState *gsi_state, const char *parent_name)
1486{
1487    DeviceState *dev;
1488    SysBusDevice *d;
1489    unsigned int i;
1490
1491    if (kvm_ioapic_in_kernel()) {
1492        dev = qdev_create(NULL, TYPE_KVM_IOAPIC);
1493    } else {
1494        dev = qdev_create(NULL, TYPE_IOAPIC);
1495    }
1496    if (parent_name) {
1497        object_property_add_child(object_resolve_path(parent_name, NULL),
1498                                  "ioapic", OBJECT(dev), NULL);
1499    }
1500    qdev_init_nofail(dev);
1501    d = SYS_BUS_DEVICE(dev);
1502    sysbus_mmio_map(d, 0, IO_APIC_DEFAULT_ADDRESS);
1503
1504    for (i = 0; i < IOAPIC_NUM_PINS; i++) {
1505        gsi_state->ioapic_irq[i] = qdev_get_gpio_in(dev, i);
1506    }
1507}
1508
1509static void pc_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
1510                               Error **errp)
1511{
1512    const PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1513    const PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
1514    const MachineState *ms = MACHINE(hotplug_dev);
1515    const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
1516    const uint64_t legacy_align = TARGET_PAGE_SIZE;
1517    Error *local_err = NULL;
1518
1519    /*
1520     * When -no-acpi is used with Q35 machine type, no ACPI is built,
1521     * but pcms->acpi_dev is still created. Check !acpi_enabled in
1522     * addition to cover this case.
1523     */
1524    if (!pcms->acpi_dev || !acpi_enabled) {
1525        error_setg(errp,
1526                   "memory hotplug is not enabled: missing acpi device or acpi disabled");
1527        return;
1528    }
1529
1530    if (is_nvdimm && !ms->nvdimms_state->is_enabled) {
1531        error_setg(errp, "nvdimm is not enabled: missing 'nvdimm' in '-M'");
1532        return;
1533    }
1534
1535    hotplug_handler_pre_plug(pcms->acpi_dev, dev, &local_err);
1536    if (local_err) {
1537        error_propagate(errp, local_err);
1538        return;
1539    }
1540
1541    pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev),
1542                     pcmc->enforce_aligned_dimm ? NULL : &legacy_align, errp);
1543}
1544
1545static void pc_memory_plug(HotplugHandler *hotplug_dev,
1546                           DeviceState *dev, Error **errp)
1547{
1548    Error *local_err = NULL;
1549    PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1550    MachineState *ms = MACHINE(hotplug_dev);
1551    bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
1552
1553    pc_dimm_plug(PC_DIMM(dev), MACHINE(pcms), &local_err);
1554    if (local_err) {
1555        goto out;
1556    }
1557
1558    if (is_nvdimm) {
1559        nvdimm_plug(ms->nvdimms_state);
1560    }
1561
1562    hotplug_handler_plug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &error_abort);
1563out:
1564    error_propagate(errp, local_err);
1565}
1566
1567static void pc_memory_unplug_request(HotplugHandler *hotplug_dev,
1568                                     DeviceState *dev, Error **errp)
1569{
1570    Error *local_err = NULL;
1571    PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1572
1573    /*
1574     * When -no-acpi is used with Q35 machine type, no ACPI is built,
1575     * but pcms->acpi_dev is still created. Check !acpi_enabled in
1576     * addition to cover this case.
1577     */
1578    if (!pcms->acpi_dev || !acpi_enabled) {
1579        error_setg(&local_err,
1580                   "memory hotplug is not enabled: missing acpi device or acpi disabled");
1581        goto out;
1582    }
1583
1584    if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) {
1585        error_setg(&local_err,
1586                   "nvdimm device hot unplug is not supported yet.");
1587        goto out;
1588    }
1589
1590    hotplug_handler_unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev,
1591                                   &local_err);
1592out:
1593    error_propagate(errp, local_err);
1594}
1595
1596static void pc_memory_unplug(HotplugHandler *hotplug_dev,
1597                             DeviceState *dev, Error **errp)
1598{
1599    PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1600    Error *local_err = NULL;
1601
1602    hotplug_handler_unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err);
1603    if (local_err) {
1604        goto out;
1605    }
1606
1607    pc_dimm_unplug(PC_DIMM(dev), MACHINE(pcms));
1608    object_property_set_bool(OBJECT(dev), false, "realized", NULL);
1609 out:
1610    error_propagate(errp, local_err);
1611}
1612
1613static int pc_apic_cmp(const void *a, const void *b)
1614{
1615   CPUArchId *apic_a = (CPUArchId *)a;
1616   CPUArchId *apic_b = (CPUArchId *)b;
1617
1618   return apic_a->arch_id - apic_b->arch_id;
1619}
1620
1621/* returns pointer to CPUArchId descriptor that matches CPU's apic_id
1622 * in ms->possible_cpus->cpus, if ms->possible_cpus->cpus has no
1623 * entry corresponding to CPU's apic_id returns NULL.
1624 */
1625static CPUArchId *pc_find_cpu_slot(MachineState *ms, uint32_t id, int *idx)
1626{
1627    CPUArchId apic_id, *found_cpu;
1628
1629    apic_id.arch_id = id;
1630    found_cpu = bsearch(&apic_id, ms->possible_cpus->cpus,
1631        ms->possible_cpus->len, sizeof(*ms->possible_cpus->cpus),
1632        pc_apic_cmp);
1633    if (found_cpu && idx) {
1634        *idx = found_cpu - ms->possible_cpus->cpus;
1635    }
1636    return found_cpu;
1637}
1638
1639static void pc_cpu_plug(HotplugHandler *hotplug_dev,
1640                        DeviceState *dev, Error **errp)
1641{
1642    CPUArchId *found_cpu;
1643    Error *local_err = NULL;
1644    X86CPU *cpu = X86_CPU(dev);
1645    PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1646    X86MachineState *x86ms = X86_MACHINE(pcms);
1647
1648    if (pcms->acpi_dev) {
1649        hotplug_handler_plug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err);
1650        if (local_err) {
1651            goto out;
1652        }
1653    }
1654
1655    /* increment the number of CPUs */
1656    x86ms->boot_cpus++;
1657    if (x86ms->rtc) {
1658        rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus);
1659    }
1660    if (x86ms->fw_cfg) {
1661        fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus);
1662    }
1663
1664    found_cpu = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, NULL);
1665    found_cpu->cpu = OBJECT(dev);
1666out:
1667    error_propagate(errp, local_err);
1668}
1669static void pc_cpu_unplug_request_cb(HotplugHandler *hotplug_dev,
1670                                     DeviceState *dev, Error **errp)
1671{
1672    int idx = -1;
1673    Error *local_err = NULL;
1674    X86CPU *cpu = X86_CPU(dev);
1675    PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1676
1677    if (!pcms->acpi_dev) {
1678        error_setg(&local_err, "CPU hot unplug not supported without ACPI");
1679        goto out;
1680    }
1681
1682    pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, &idx);
1683    assert(idx != -1);
1684    if (idx == 0) {
1685        error_setg(&local_err, "Boot CPU is unpluggable");
1686        goto out;
1687    }
1688
1689    hotplug_handler_unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev,
1690                                   &local_err);
1691    if (local_err) {
1692        goto out;
1693    }
1694
1695 out:
1696    error_propagate(errp, local_err);
1697
1698}
1699
1700static void pc_cpu_unplug_cb(HotplugHandler *hotplug_dev,
1701                             DeviceState *dev, Error **errp)
1702{
1703    CPUArchId *found_cpu;
1704    Error *local_err = NULL;
1705    X86CPU *cpu = X86_CPU(dev);
1706    PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1707    X86MachineState *x86ms = X86_MACHINE(pcms);
1708
1709    hotplug_handler_unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err);
1710    if (local_err) {
1711        goto out;
1712    }
1713
1714    found_cpu = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, NULL);
1715    found_cpu->cpu = NULL;
1716    object_property_set_bool(OBJECT(dev), false, "realized", NULL);
1717
1718    /* decrement the number of CPUs */
1719    x86ms->boot_cpus--;
1720    /* Update the number of CPUs in CMOS */
1721    rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus);
1722    fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus);
1723 out:
1724    error_propagate(errp, local_err);
1725}
1726
1727static void pc_cpu_pre_plug(HotplugHandler *hotplug_dev,
1728                            DeviceState *dev, Error **errp)
1729{
1730    int idx;
1731    CPUState *cs;
1732    CPUArchId *cpu_slot;
1733    X86CPUTopoInfo topo;
1734    X86CPU *cpu = X86_CPU(dev);
1735    CPUX86State *env = &cpu->env;
1736    MachineState *ms = MACHINE(hotplug_dev);
1737    PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1738    X86MachineState *x86ms = X86_MACHINE(pcms);
1739    unsigned int smp_cores = ms->smp.cores;
1740    unsigned int smp_threads = ms->smp.threads;
1741
1742    if(!object_dynamic_cast(OBJECT(cpu), ms->cpu_type)) {
1743        error_setg(errp, "Invalid CPU type, expected cpu type: '%s'",
1744                   ms->cpu_type);
1745        return;
1746    }
1747
1748    env->nr_dies = x86ms->smp_dies;
1749
1750    /*
1751     * If APIC ID is not set,
1752     * set it based on socket/die/core/thread properties.
1753     */
1754    if (cpu->apic_id == UNASSIGNED_APIC_ID) {
1755        int max_socket = (ms->smp.max_cpus - 1) /
1756                                smp_threads / smp_cores / x86ms->smp_dies;
1757
1758        /*
1759         * die-id was optional in QEMU 4.0 and older, so keep it optional
1760         * if there's only one die per socket.
1761         */
1762        if (cpu->die_id < 0 && x86ms->smp_dies == 1) {
1763            cpu->die_id = 0;
1764        }
1765
1766        if (cpu->socket_id < 0) {
1767            error_setg(errp, "CPU socket-id is not set");
1768            return;
1769        } else if (cpu->socket_id > max_socket) {
1770            error_setg(errp, "Invalid CPU socket-id: %u must be in range 0:%u",
1771                       cpu->socket_id, max_socket);
1772            return;
1773        }
1774        if (cpu->die_id < 0) {
1775            error_setg(errp, "CPU die-id is not set");
1776            return;
1777        } else if (cpu->die_id > x86ms->smp_dies - 1) {
1778            error_setg(errp, "Invalid CPU die-id: %u must be in range 0:%u",
1779                       cpu->die_id, x86ms->smp_dies - 1);
1780            return;
1781        }
1782        if (cpu->core_id < 0) {
1783            error_setg(errp, "CPU core-id is not set");
1784            return;
1785        } else if (cpu->core_id > (smp_cores - 1)) {
1786            error_setg(errp, "Invalid CPU core-id: %u must be in range 0:%u",
1787                       cpu->core_id, smp_cores - 1);
1788            return;
1789        }
1790        if (cpu->thread_id < 0) {
1791            error_setg(errp, "CPU thread-id is not set");
1792            return;
1793        } else if (cpu->thread_id > (smp_threads - 1)) {
1794            error_setg(errp, "Invalid CPU thread-id: %u must be in range 0:%u",
1795                       cpu->thread_id, smp_threads - 1);
1796            return;
1797        }
1798
1799        topo.pkg_id = cpu->socket_id;
1800        topo.die_id = cpu->die_id;
1801        topo.core_id = cpu->core_id;
1802        topo.smt_id = cpu->thread_id;
1803        cpu->apic_id = apicid_from_topo_ids(x86ms->smp_dies, smp_cores,
1804                                            smp_threads, &topo);
1805    }
1806
1807    cpu_slot = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, &idx);
1808    if (!cpu_slot) {
1809        MachineState *ms = MACHINE(pcms);
1810
1811        x86_topo_ids_from_apicid(cpu->apic_id, x86ms->smp_dies,
1812                                 smp_cores, smp_threads, &topo);
1813        error_setg(errp,
1814            "Invalid CPU [socket: %u, die: %u, core: %u, thread: %u] with"
1815            " APIC ID %" PRIu32 ", valid index range 0:%d",
1816            topo.pkg_id, topo.die_id, topo.core_id, topo.smt_id,
1817            cpu->apic_id, ms->possible_cpus->len - 1);
1818        return;
1819    }
1820
1821    if (cpu_slot->cpu) {
1822        error_setg(errp, "CPU[%d] with APIC ID %" PRIu32 " exists",
1823                   idx, cpu->apic_id);
1824        return;
1825    }
1826
1827    /* if 'address' properties socket-id/core-id/thread-id are not set, set them
1828     * so that machine_query_hotpluggable_cpus would show correct values
1829     */
1830    /* TODO: move socket_id/core_id/thread_id checks into x86_cpu_realizefn()
1831     * once -smp refactoring is complete and there will be CPU private
1832     * CPUState::nr_cores and CPUState::nr_threads fields instead of globals */
1833    x86_topo_ids_from_apicid(cpu->apic_id, x86ms->smp_dies,
1834                             smp_cores, smp_threads, &topo);
1835    if (cpu->socket_id != -1 && cpu->socket_id != topo.pkg_id) {
1836        error_setg(errp, "property socket-id: %u doesn't match set apic-id:"
1837            " 0x%x (socket-id: %u)", cpu->socket_id, cpu->apic_id, topo.pkg_id);
1838        return;
1839    }
1840    cpu->socket_id = topo.pkg_id;
1841
1842    if (cpu->die_id != -1 && cpu->die_id != topo.die_id) {
1843        error_setg(errp, "property die-id: %u doesn't match set apic-id:"
1844            " 0x%x (die-id: %u)", cpu->die_id, cpu->apic_id, topo.die_id);
1845        return;
1846    }
1847    cpu->die_id = topo.die_id;
1848
1849    if (cpu->core_id != -1 && cpu->core_id != topo.core_id) {
1850        error_setg(errp, "property core-id: %u doesn't match set apic-id:"
1851            " 0x%x (core-id: %u)", cpu->core_id, cpu->apic_id, topo.core_id);
1852        return;
1853    }
1854    cpu->core_id = topo.core_id;
1855
1856    if (cpu->thread_id != -1 && cpu->thread_id != topo.smt_id) {
1857        error_setg(errp, "property thread-id: %u doesn't match set apic-id:"
1858            " 0x%x (thread-id: %u)", cpu->thread_id, cpu->apic_id, topo.smt_id);
1859        return;
1860    }
1861    cpu->thread_id = topo.smt_id;
1862
1863    if (hyperv_feat_enabled(cpu, HYPERV_FEAT_VPINDEX) &&
1864        !kvm_hv_vpindex_settable()) {
1865        error_setg(errp, "kernel doesn't allow setting HyperV VP_INDEX");
1866        return;
1867    }
1868
1869    cs = CPU(cpu);
1870    cs->cpu_index = idx;
1871
1872    numa_cpu_pre_plug(cpu_slot, dev, errp);
1873}
1874
1875static void pc_virtio_pmem_pci_pre_plug(HotplugHandler *hotplug_dev,
1876                                        DeviceState *dev, Error **errp)
1877{
1878    HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev);
1879    Error *local_err = NULL;
1880
1881    if (!hotplug_dev2) {
1882        /*
1883         * Without a bus hotplug handler, we cannot control the plug/unplug
1884         * order. This should never be the case on x86, however better add
1885         * a safety net.
1886         */
1887        error_setg(errp, "virtio-pmem-pci not supported on this bus.");
1888        return;
1889    }
1890    /*
1891     * First, see if we can plug this memory device at all. If that
1892     * succeeds, branch of to the actual hotplug handler.
1893     */
1894    memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), NULL,
1895                           &local_err);
1896    if (!local_err) {
1897        hotplug_handler_pre_plug(hotplug_dev2, dev, &local_err);
1898    }
1899    error_propagate(errp, local_err);
1900}
1901
1902static void pc_virtio_pmem_pci_plug(HotplugHandler *hotplug_dev,
1903                                    DeviceState *dev, Error **errp)
1904{
1905    HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev);
1906    Error *local_err = NULL;
1907
1908    /*
1909     * Plug the memory device first and then branch off to the actual
1910     * hotplug handler. If that one fails, we can easily undo the memory
1911     * device bits.
1912     */
1913    memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
1914    hotplug_handler_plug(hotplug_dev2, dev, &local_err);
1915    if (local_err) {
1916        memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
1917    }
1918    error_propagate(errp, local_err);
1919}
1920
1921static void pc_virtio_pmem_pci_unplug_request(HotplugHandler *hotplug_dev,
1922                                              DeviceState *dev, Error **errp)
1923{
1924    /* We don't support virtio pmem hot unplug */
1925    error_setg(errp, "virtio pmem device unplug not supported.");
1926}
1927
1928static void pc_virtio_pmem_pci_unplug(HotplugHandler *hotplug_dev,
1929                                      DeviceState *dev, Error **errp)
1930{
1931    /* We don't support virtio pmem hot unplug */
1932}
1933
1934static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev,
1935                                          DeviceState *dev, Error **errp)
1936{
1937    if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
1938        pc_memory_pre_plug(hotplug_dev, dev, errp);
1939    } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
1940        pc_cpu_pre_plug(hotplug_dev, dev, errp);
1941    } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) {
1942        pc_virtio_pmem_pci_pre_plug(hotplug_dev, dev, errp);
1943    }
1944}
1945
1946static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev,
1947                                      DeviceState *dev, Error **errp)
1948{
1949    if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
1950        pc_memory_plug(hotplug_dev, dev, errp);
1951    } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
1952        pc_cpu_plug(hotplug_dev, dev, errp);
1953    } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) {
1954        pc_virtio_pmem_pci_plug(hotplug_dev, dev, errp);
1955    }
1956}
1957
1958static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev,
1959                                                DeviceState *dev, Error **errp)
1960{
1961    if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
1962        pc_memory_unplug_request(hotplug_dev, dev, errp);
1963    } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
1964        pc_cpu_unplug_request_cb(hotplug_dev, dev, errp);
1965    } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) {
1966        pc_virtio_pmem_pci_unplug_request(hotplug_dev, dev, errp);
1967    } else {
1968        error_setg(errp, "acpi: device unplug request for not supported device"
1969                   " type: %s", object_get_typename(OBJECT(dev)));
1970    }
1971}
1972
1973static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev,
1974                                        DeviceState *dev, Error **errp)
1975{
1976    if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
1977        pc_memory_unplug(hotplug_dev, dev, errp);
1978    } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
1979        pc_cpu_unplug_cb(hotplug_dev, dev, errp);
1980    } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) {
1981        pc_virtio_pmem_pci_unplug(hotplug_dev, dev, errp);
1982    } else {
1983        error_setg(errp, "acpi: device unplug for not supported device"
1984                   " type: %s", object_get_typename(OBJECT(dev)));
1985    }
1986}
1987
1988static HotplugHandler *pc_get_hotplug_handler(MachineState *machine,
1989                                             DeviceState *dev)
1990{
1991    if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) ||
1992        object_dynamic_cast(OBJECT(dev), TYPE_CPU) ||
1993        object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) {
1994        return HOTPLUG_HANDLER(machine);
1995    }
1996
1997    return NULL;
1998}
1999
2000static void
2001pc_machine_get_device_memory_region_size(Object *obj, Visitor *v,
2002                                         const char *name, void *opaque,
2003                                         Error **errp)
2004{
2005    MachineState *ms = MACHINE(obj);
2006    int64_t value = 0;
2007
2008    if (ms->device_memory) {
2009        value = memory_region_size(&ms->device_memory->mr);
2010    }
2011
2012    visit_type_int(v, name, &value, errp);
2013}
2014
2015static void pc_machine_get_vmport(Object *obj, Visitor *v, const char *name,
2016                                  void *opaque, Error **errp)
2017{
2018    PCMachineState *pcms = PC_MACHINE(obj);
2019    OnOffAuto vmport = pcms->vmport;
2020
2021    visit_type_OnOffAuto(v, name, &vmport, errp);
2022}
2023
2024static void pc_machine_set_vmport(Object *obj, Visitor *v, const char *name,
2025                                  void *opaque, Error **errp)
2026{
2027    PCMachineState *pcms = PC_MACHINE(obj);
2028
2029    visit_type_OnOffAuto(v, name, &pcms->vmport, errp);
2030}
2031
2032bool pc_machine_is_smm_enabled(PCMachineState *pcms)
2033{
2034    bool smm_available = false;
2035
2036    if (pcms->smm == ON_OFF_AUTO_OFF) {
2037        return false;
2038    }
2039
2040    if (tcg_enabled() || qtest_enabled()) {
2041        smm_available = true;
2042    } else if (kvm_enabled()) {
2043        smm_available = kvm_has_smm();
2044    }
2045
2046    if (smm_available) {
2047        return true;
2048    }
2049
2050    if (pcms->smm == ON_OFF_AUTO_ON) {
2051        error_report("System Management Mode not supported by this hypervisor.");
2052        exit(1);
2053    }
2054    return false;
2055}
2056
2057static void pc_machine_get_smm(Object *obj, Visitor *v, const char *name,
2058                               void *opaque, Error **errp)
2059{
2060    PCMachineState *pcms = PC_MACHINE(obj);
2061    OnOffAuto smm = pcms->smm;
2062
2063    visit_type_OnOffAuto(v, name, &smm, errp);
2064}
2065
2066static void pc_machine_set_smm(Object *obj, Visitor *v, const char *name,
2067                               void *opaque, Error **errp)
2068{
2069    PCMachineState *pcms = PC_MACHINE(obj);
2070
2071    visit_type_OnOffAuto(v, name, &pcms->smm, errp);
2072}
2073
2074static bool pc_machine_get_smbus(Object *obj, Error **errp)
2075{
2076    PCMachineState *pcms = PC_MACHINE(obj);
2077
2078    return pcms->smbus_enabled;
2079}
2080
2081static void pc_machine_set_smbus(Object *obj, bool value, Error **errp)
2082{
2083    PCMachineState *pcms = PC_MACHINE(obj);
2084
2085    pcms->smbus_enabled = value;
2086}
2087
2088static bool pc_machine_get_sata(Object *obj, Error **errp)
2089{
2090    PCMachineState *pcms = PC_MACHINE(obj);
2091
2092    return pcms->sata_enabled;
2093}
2094
2095static void pc_machine_set_sata(Object *obj, bool value, Error **errp)
2096{
2097    PCMachineState *pcms = PC_MACHINE(obj);
2098
2099    pcms->sata_enabled = value;
2100}
2101
2102static bool pc_machine_get_pit(Object *obj, Error **errp)
2103{
2104    PCMachineState *pcms = PC_MACHINE(obj);
2105
2106    return pcms->pit_enabled;
2107}
2108
2109static void pc_machine_set_pit(Object *obj, bool value, Error **errp)
2110{
2111    PCMachineState *pcms = PC_MACHINE(obj);
2112
2113    pcms->pit_enabled = value;
2114}
2115
2116static void pc_machine_initfn(Object *obj)
2117{
2118    PCMachineState *pcms = PC_MACHINE(obj);
2119
2120    pcms->smm = ON_OFF_AUTO_AUTO;
2121#ifdef CONFIG_VMPORT
2122    pcms->vmport = ON_OFF_AUTO_AUTO;
2123#else
2124    pcms->vmport = ON_OFF_AUTO_OFF;
2125#endif /* CONFIG_VMPORT */
2126    /* acpi build is enabled by default if machine supports it */
2127    pcms->acpi_build_enabled = PC_MACHINE_GET_CLASS(pcms)->has_acpi_build;
2128    pcms->smbus_enabled = true;
2129    pcms->sata_enabled = true;
2130    pcms->pit_enabled = true;
2131
2132    pc_system_flash_create(pcms);
2133}
2134
2135static void pc_machine_reset(MachineState *machine)
2136{
2137    CPUState *cs;
2138    X86CPU *cpu;
2139
2140    qemu_devices_reset();
2141
2142    /* Reset APIC after devices have been reset to cancel
2143     * any changes that qemu_devices_reset() might have done.
2144     */
2145    CPU_FOREACH(cs) {
2146        cpu = X86_CPU(cs);
2147
2148        if (cpu->apic_state) {
2149            device_reset(cpu->apic_state);
2150        }
2151    }
2152}
2153
2154static void pc_machine_wakeup(MachineState *machine)
2155{
2156    cpu_synchronize_all_states();
2157    pc_machine_reset(machine);
2158    cpu_synchronize_all_post_reset();
2159}
2160
2161static bool pc_hotplug_allowed(MachineState *ms, DeviceState *dev, Error **errp)
2162{
2163    X86IOMMUState *iommu = x86_iommu_get_default();
2164    IntelIOMMUState *intel_iommu;
2165
2166    if (iommu &&
2167        object_dynamic_cast((Object *)iommu, TYPE_INTEL_IOMMU_DEVICE) &&
2168        object_dynamic_cast((Object *)dev, "vfio-pci")) {
2169        intel_iommu = INTEL_IOMMU_DEVICE(iommu);
2170        if (!intel_iommu->caching_mode) {
2171            error_setg(errp, "Device assignment is not allowed without "
2172                       "enabling caching-mode=on for Intel IOMMU.");
2173            return false;
2174        }
2175    }
2176
2177    return true;
2178}
2179
2180static void pc_machine_class_init(ObjectClass *oc, void *data)
2181{
2182    MachineClass *mc = MACHINE_CLASS(oc);
2183    PCMachineClass *pcmc = PC_MACHINE_CLASS(oc);
2184    HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
2185
2186    pcmc->pci_enabled = true;
2187    pcmc->has_acpi_build = true;
2188    pcmc->rsdp_in_ram = true;
2189    pcmc->smbios_defaults = true;
2190    pcmc->smbios_uuid_encoded = true;
2191    pcmc->gigabyte_align = true;
2192    pcmc->has_reserved_memory = true;
2193    pcmc->kvmclock_enabled = true;
2194    pcmc->enforce_aligned_dimm = true;
2195    /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported
2196     * to be used at the moment, 32K should be enough for a while.  */
2197    pcmc->acpi_data_size = 0x20000 + 0x8000;
2198    pcmc->linuxboot_dma_enabled = true;
2199    pcmc->pvh_enabled = true;
2200    assert(!mc->get_hotplug_handler);
2201    mc->get_hotplug_handler = pc_get_hotplug_handler;
2202    mc->hotplug_allowed = pc_hotplug_allowed;
2203    mc->cpu_index_to_instance_props = x86_cpu_index_to_props;
2204    mc->get_default_cpu_node_id = x86_get_default_cpu_node_id;
2205    mc->possible_cpu_arch_ids = x86_possible_cpu_arch_ids;
2206    mc->auto_enable_numa_with_memhp = true;
2207    mc->has_hotpluggable_cpus = true;
2208    mc->default_boot_order = "cad";
2209    mc->hot_add_cpu = pc_hot_add_cpu;
2210    mc->smp_parse = pc_smp_parse;
2211    mc->block_default_type = IF_IDE;
2212    mc->max_cpus = 255;
2213    mc->reset = pc_machine_reset;
2214    mc->wakeup = pc_machine_wakeup;
2215    hc->pre_plug = pc_machine_device_pre_plug_cb;
2216    hc->plug = pc_machine_device_plug_cb;
2217    hc->unplug_request = pc_machine_device_unplug_request_cb;
2218    hc->unplug = pc_machine_device_unplug_cb;
2219    mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
2220    mc->nvdimm_supported = true;
2221    mc->numa_mem_supported = true;
2222
2223    object_class_property_add(oc, PC_MACHINE_DEVMEM_REGION_SIZE, "int",
2224        pc_machine_get_device_memory_region_size, NULL,
2225        NULL, NULL, &error_abort);
2226
2227    object_class_property_add(oc, PC_MACHINE_SMM, "OnOffAuto",
2228        pc_machine_get_smm, pc_machine_set_smm,
2229        NULL, NULL, &error_abort);
2230    object_class_property_set_description(oc, PC_MACHINE_SMM,
2231        "Enable SMM (pc & q35)", &error_abort);
2232
2233    object_class_property_add(oc, PC_MACHINE_VMPORT, "OnOffAuto",
2234        pc_machine_get_vmport, pc_machine_set_vmport,
2235        NULL, NULL, &error_abort);
2236    object_class_property_set_description(oc, PC_MACHINE_VMPORT,
2237        "Enable vmport (pc & q35)", &error_abort);
2238
2239    object_class_property_add_bool(oc, PC_MACHINE_SMBUS,
2240        pc_machine_get_smbus, pc_machine_set_smbus, &error_abort);
2241
2242    object_class_property_add_bool(oc, PC_MACHINE_SATA,
2243        pc_machine_get_sata, pc_machine_set_sata, &error_abort);
2244
2245    object_class_property_add_bool(oc, PC_MACHINE_PIT,
2246        pc_machine_get_pit, pc_machine_set_pit, &error_abort);
2247}
2248
2249static const TypeInfo pc_machine_info = {
2250    .name = TYPE_PC_MACHINE,
2251    .parent = TYPE_X86_MACHINE,
2252    .abstract = true,
2253    .instance_size = sizeof(PCMachineState),
2254    .instance_init = pc_machine_initfn,
2255    .class_size = sizeof(PCMachineClass),
2256    .class_init = pc_machine_class_init,
2257    .interfaces = (InterfaceInfo[]) {
2258         { TYPE_HOTPLUG_HANDLER },
2259         { }
2260    },
2261};
2262
2263static void pc_machine_register_types(void)
2264{
2265    type_register_static(&pc_machine_info);
2266}
2267
2268type_init(pc_machine_register_types)
2269