qemu/hw/sd/sdhci.c
<<
>>
Prefs
   1/*
   2 * SD Association Host Standard Specification v2.0 controller emulation
   3 *
   4 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
   5 * Mitsyanko Igor <i.mitsyanko@samsung.com>
   6 * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
   7 *
   8 * Based on MMC controller for Samsung S5PC1xx-based board emulation
   9 * by Alexey Merkulov and Vladimir Monakhov.
  10 *
  11 * This program is free software; you can redistribute it and/or modify it
  12 * under the terms of the GNU General Public License as published by the
  13 * Free Software Foundation; either version 2 of the License, or (at your
  14 * option) any later version.
  15 *
  16 * This program is distributed in the hope that it will be useful,
  17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  19 * See the GNU General Public License for more details.
  20 *
  21 * You should have received a copy of the GNU General Public License along
  22 * with this program; if not, see <http://www.gnu.org/licenses/>.
  23 */
  24
  25#include "qemu/osdep.h"
  26#include "qemu/units.h"
  27#include "qemu/error-report.h"
  28#include "qapi/error.h"
  29#include "hw/irq.h"
  30#include "hw/qdev-properties.h"
  31#include "sysemu/dma.h"
  32#include "qemu/timer.h"
  33#include "qemu/bitops.h"
  34#include "hw/sd/sdhci.h"
  35#include "migration/vmstate.h"
  36#include "sdhci-internal.h"
  37#include "qemu/log.h"
  38#include "qemu/module.h"
  39#include "trace.h"
  40
  41#define TYPE_SDHCI_BUS "sdhci-bus"
  42#define SDHCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SDHCI_BUS)
  43
  44#define MASKED_WRITE(reg, mask, val)  (reg = (reg & (mask)) | (val))
  45
  46static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
  47{
  48    return 1 << (9 + FIELD_EX32(s->capareg, SDHC_CAPAB, MAXBLOCKLENGTH));
  49}
  50
  51/* return true on error */
  52static bool sdhci_check_capab_freq_range(SDHCIState *s, const char *desc,
  53                                         uint8_t freq, Error **errp)
  54{
  55    if (s->sd_spec_version >= 3) {
  56        return false;
  57    }
  58    switch (freq) {
  59    case 0:
  60    case 10 ... 63:
  61        break;
  62    default:
  63        error_setg(errp, "SD %s clock frequency can have value"
  64                   "in range 0-63 only", desc);
  65        return true;
  66    }
  67    return false;
  68}
  69
  70static void sdhci_check_capareg(SDHCIState *s, Error **errp)
  71{
  72    uint64_t msk = s->capareg;
  73    uint32_t val;
  74    bool y;
  75
  76    switch (s->sd_spec_version) {
  77    case 4:
  78        val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS64BIT_V4);
  79        trace_sdhci_capareg("64-bit system bus (v4)", val);
  80        msk = FIELD_DP64(msk, SDHC_CAPAB, BUS64BIT_V4, 0);
  81
  82        val = FIELD_EX64(s->capareg, SDHC_CAPAB, UHS_II);
  83        trace_sdhci_capareg("UHS-II", val);
  84        msk = FIELD_DP64(msk, SDHC_CAPAB, UHS_II, 0);
  85
  86        val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA3);
  87        trace_sdhci_capareg("ADMA3", val);
  88        msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA3, 0);
  89
  90    /* fallthrough */
  91    case 3:
  92        val = FIELD_EX64(s->capareg, SDHC_CAPAB, ASYNC_INT);
  93        trace_sdhci_capareg("async interrupt", val);
  94        msk = FIELD_DP64(msk, SDHC_CAPAB, ASYNC_INT, 0);
  95
  96        val = FIELD_EX64(s->capareg, SDHC_CAPAB, SLOT_TYPE);
  97        if (val) {
  98            error_setg(errp, "slot-type not supported");
  99            return;
 100        }
 101        trace_sdhci_capareg("slot type", val);
 102        msk = FIELD_DP64(msk, SDHC_CAPAB, SLOT_TYPE, 0);
 103
 104        if (val != 2) {
 105            val = FIELD_EX64(s->capareg, SDHC_CAPAB, EMBEDDED_8BIT);
 106            trace_sdhci_capareg("8-bit bus", val);
 107        }
 108        msk = FIELD_DP64(msk, SDHC_CAPAB, EMBEDDED_8BIT, 0);
 109
 110        val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS_SPEED);
 111        trace_sdhci_capareg("bus speed mask", val);
 112        msk = FIELD_DP64(msk, SDHC_CAPAB, BUS_SPEED, 0);
 113
 114        val = FIELD_EX64(s->capareg, SDHC_CAPAB, DRIVER_STRENGTH);
 115        trace_sdhci_capareg("driver strength mask", val);
 116        msk = FIELD_DP64(msk, SDHC_CAPAB, DRIVER_STRENGTH, 0);
 117
 118        val = FIELD_EX64(s->capareg, SDHC_CAPAB, TIMER_RETUNING);
 119        trace_sdhci_capareg("timer re-tuning", val);
 120        msk = FIELD_DP64(msk, SDHC_CAPAB, TIMER_RETUNING, 0);
 121
 122        val = FIELD_EX64(s->capareg, SDHC_CAPAB, SDR50_TUNING);
 123        trace_sdhci_capareg("use SDR50 tuning", val);
 124        msk = FIELD_DP64(msk, SDHC_CAPAB, SDR50_TUNING, 0);
 125
 126        val = FIELD_EX64(s->capareg, SDHC_CAPAB, RETUNING_MODE);
 127        trace_sdhci_capareg("re-tuning mode", val);
 128        msk = FIELD_DP64(msk, SDHC_CAPAB, RETUNING_MODE, 0);
 129
 130        val = FIELD_EX64(s->capareg, SDHC_CAPAB, CLOCK_MULT);
 131        trace_sdhci_capareg("clock multiplier", val);
 132        msk = FIELD_DP64(msk, SDHC_CAPAB, CLOCK_MULT, 0);
 133
 134    /* fallthrough */
 135    case 2: /* default version */
 136        val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA2);
 137        trace_sdhci_capareg("ADMA2", val);
 138        msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA2, 0);
 139
 140        val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA1);
 141        trace_sdhci_capareg("ADMA1", val);
 142        msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA1, 0);
 143
 144        val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS64BIT);
 145        trace_sdhci_capareg("64-bit system bus (v3)", val);
 146        msk = FIELD_DP64(msk, SDHC_CAPAB, BUS64BIT, 0);
 147
 148    /* fallthrough */
 149    case 1:
 150        y = FIELD_EX64(s->capareg, SDHC_CAPAB, TOUNIT);
 151        msk = FIELD_DP64(msk, SDHC_CAPAB, TOUNIT, 0);
 152
 153        val = FIELD_EX64(s->capareg, SDHC_CAPAB, TOCLKFREQ);
 154        trace_sdhci_capareg(y ? "timeout (MHz)" : "Timeout (KHz)", val);
 155        if (sdhci_check_capab_freq_range(s, "timeout", val, errp)) {
 156            return;
 157        }
 158        msk = FIELD_DP64(msk, SDHC_CAPAB, TOCLKFREQ, 0);
 159
 160        val = FIELD_EX64(s->capareg, SDHC_CAPAB, BASECLKFREQ);
 161        trace_sdhci_capareg(y ? "base (MHz)" : "Base (KHz)", val);
 162        if (sdhci_check_capab_freq_range(s, "base", val, errp)) {
 163            return;
 164        }
 165        msk = FIELD_DP64(msk, SDHC_CAPAB, BASECLKFREQ, 0);
 166
 167        val = FIELD_EX64(s->capareg, SDHC_CAPAB, MAXBLOCKLENGTH);
 168        if (val >= 3) {
 169            error_setg(errp, "block size can be 512, 1024 or 2048 only");
 170            return;
 171        }
 172        trace_sdhci_capareg("max block length", sdhci_get_fifolen(s));
 173        msk = FIELD_DP64(msk, SDHC_CAPAB, MAXBLOCKLENGTH, 0);
 174
 175        val = FIELD_EX64(s->capareg, SDHC_CAPAB, HIGHSPEED);
 176        trace_sdhci_capareg("high speed", val);
 177        msk = FIELD_DP64(msk, SDHC_CAPAB, HIGHSPEED, 0);
 178
 179        val = FIELD_EX64(s->capareg, SDHC_CAPAB, SDMA);
 180        trace_sdhci_capareg("SDMA", val);
 181        msk = FIELD_DP64(msk, SDHC_CAPAB, SDMA, 0);
 182
 183        val = FIELD_EX64(s->capareg, SDHC_CAPAB, SUSPRESUME);
 184        trace_sdhci_capareg("suspend/resume", val);
 185        msk = FIELD_DP64(msk, SDHC_CAPAB, SUSPRESUME, 0);
 186
 187        val = FIELD_EX64(s->capareg, SDHC_CAPAB, V33);
 188        trace_sdhci_capareg("3.3v", val);
 189        msk = FIELD_DP64(msk, SDHC_CAPAB, V33, 0);
 190
 191        val = FIELD_EX64(s->capareg, SDHC_CAPAB, V30);
 192        trace_sdhci_capareg("3.0v", val);
 193        msk = FIELD_DP64(msk, SDHC_CAPAB, V30, 0);
 194
 195        val = FIELD_EX64(s->capareg, SDHC_CAPAB, V18);
 196        trace_sdhci_capareg("1.8v", val);
 197        msk = FIELD_DP64(msk, SDHC_CAPAB, V18, 0);
 198        break;
 199
 200    default:
 201        error_setg(errp, "Unsupported spec version: %u", s->sd_spec_version);
 202    }
 203    if (msk) {
 204        qemu_log_mask(LOG_UNIMP,
 205                      "SDHCI: unknown CAPAB mask: 0x%016" PRIx64 "\n", msk);
 206    }
 207}
 208
 209static uint8_t sdhci_slotint(SDHCIState *s)
 210{
 211    return (s->norintsts & s->norintsigen) || (s->errintsts & s->errintsigen) ||
 212         ((s->norintsts & SDHC_NIS_INSERT) && (s->wakcon & SDHC_WKUP_ON_INS)) ||
 213         ((s->norintsts & SDHC_NIS_REMOVE) && (s->wakcon & SDHC_WKUP_ON_RMV));
 214}
 215
 216static inline void sdhci_update_irq(SDHCIState *s)
 217{
 218    qemu_set_irq(s->irq, sdhci_slotint(s));
 219}
 220
 221static void sdhci_raise_insertion_irq(void *opaque)
 222{
 223    SDHCIState *s = (SDHCIState *)opaque;
 224
 225    if (s->norintsts & SDHC_NIS_REMOVE) {
 226        timer_mod(s->insert_timer,
 227                       qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY);
 228    } else {
 229        s->prnsts = 0x1ff0000;
 230        if (s->norintstsen & SDHC_NISEN_INSERT) {
 231            s->norintsts |= SDHC_NIS_INSERT;
 232        }
 233        sdhci_update_irq(s);
 234    }
 235}
 236
 237static void sdhci_set_inserted(DeviceState *dev, bool level)
 238{
 239    SDHCIState *s = (SDHCIState *)dev;
 240
 241    trace_sdhci_set_inserted(level ? "insert" : "eject");
 242    if ((s->norintsts & SDHC_NIS_REMOVE) && level) {
 243        /* Give target some time to notice card ejection */
 244        timer_mod(s->insert_timer,
 245                       qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY);
 246    } else {
 247        if (level) {
 248            s->prnsts = 0x1ff0000;
 249            if (s->norintstsen & SDHC_NISEN_INSERT) {
 250                s->norintsts |= SDHC_NIS_INSERT;
 251            }
 252        } else {
 253            s->prnsts = 0x1fa0000;
 254            s->pwrcon &= ~SDHC_POWER_ON;
 255            s->clkcon &= ~SDHC_CLOCK_SDCLK_EN;
 256            if (s->norintstsen & SDHC_NISEN_REMOVE) {
 257                s->norintsts |= SDHC_NIS_REMOVE;
 258            }
 259        }
 260        sdhci_update_irq(s);
 261    }
 262}
 263
 264static void sdhci_set_readonly(DeviceState *dev, bool level)
 265{
 266    SDHCIState *s = (SDHCIState *)dev;
 267
 268    if (level) {
 269        s->prnsts &= ~SDHC_WRITE_PROTECT;
 270    } else {
 271        /* Write enabled */
 272        s->prnsts |= SDHC_WRITE_PROTECT;
 273    }
 274}
 275
 276static void sdhci_reset(SDHCIState *s)
 277{
 278    DeviceState *dev = DEVICE(s);
 279
 280    timer_del(s->insert_timer);
 281    timer_del(s->transfer_timer);
 282
 283    /* Set all registers to 0. Capabilities/Version registers are not cleared
 284     * and assumed to always preserve their value, given to them during
 285     * initialization */
 286    memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad);
 287
 288    /* Reset other state based on current card insertion/readonly status */
 289    sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
 290    sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
 291
 292    s->data_count = 0;
 293    s->stopped_state = sdhc_not_stopped;
 294    s->pending_insert_state = false;
 295}
 296
 297static void sdhci_poweron_reset(DeviceState *dev)
 298{
 299    /* QOM (ie power-on) reset. This is identical to reset
 300     * commanded via device register apart from handling of the
 301     * 'pending insert on powerup' quirk.
 302     */
 303    SDHCIState *s = (SDHCIState *)dev;
 304
 305    sdhci_reset(s);
 306
 307    if (s->pending_insert_quirk) {
 308        s->pending_insert_state = true;
 309    }
 310}
 311
 312static void sdhci_data_transfer(void *opaque);
 313
 314static void sdhci_send_command(SDHCIState *s)
 315{
 316    SDRequest request;
 317    uint8_t response[16];
 318    int rlen;
 319
 320    s->errintsts = 0;
 321    s->acmd12errsts = 0;
 322    request.cmd = s->cmdreg >> 8;
 323    request.arg = s->argument;
 324
 325    trace_sdhci_send_command(request.cmd, request.arg);
 326    rlen = sdbus_do_command(&s->sdbus, &request, response);
 327
 328    if (s->cmdreg & SDHC_CMD_RESPONSE) {
 329        if (rlen == 4) {
 330            s->rspreg[0] = ldl_be_p(response);
 331            s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0;
 332            trace_sdhci_response4(s->rspreg[0]);
 333        } else if (rlen == 16) {
 334            s->rspreg[0] = ldl_be_p(&response[11]);
 335            s->rspreg[1] = ldl_be_p(&response[7]);
 336            s->rspreg[2] = ldl_be_p(&response[3]);
 337            s->rspreg[3] = (response[0] << 16) | (response[1] << 8) |
 338                            response[2];
 339            trace_sdhci_response16(s->rspreg[3], s->rspreg[2],
 340                                   s->rspreg[1], s->rspreg[0]);
 341        } else {
 342            trace_sdhci_error("timeout waiting for command response");
 343            if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) {
 344                s->errintsts |= SDHC_EIS_CMDTIMEOUT;
 345                s->norintsts |= SDHC_NIS_ERR;
 346            }
 347        }
 348
 349        if (!(s->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) &&
 350            (s->norintstsen & SDHC_NISEN_TRSCMP) &&
 351            (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) {
 352            s->norintsts |= SDHC_NIS_TRSCMP;
 353        }
 354    }
 355
 356    if (s->norintstsen & SDHC_NISEN_CMDCMP) {
 357        s->norintsts |= SDHC_NIS_CMDCMP;
 358    }
 359
 360    sdhci_update_irq(s);
 361
 362    if (s->blksize && (s->cmdreg & SDHC_CMD_DATA_PRESENT)) {
 363        s->data_count = 0;
 364        sdhci_data_transfer(s);
 365    }
 366}
 367
 368static void sdhci_end_transfer(SDHCIState *s)
 369{
 370    /* Automatically send CMD12 to stop transfer if AutoCMD12 enabled */
 371    if ((s->trnmod & SDHC_TRNS_ACMD12) != 0) {
 372        SDRequest request;
 373        uint8_t response[16];
 374
 375        request.cmd = 0x0C;
 376        request.arg = 0;
 377        trace_sdhci_end_transfer(request.cmd, request.arg);
 378        sdbus_do_command(&s->sdbus, &request, response);
 379        /* Auto CMD12 response goes to the upper Response register */
 380        s->rspreg[3] = ldl_be_p(response);
 381    }
 382
 383    s->prnsts &= ~(SDHC_DOING_READ | SDHC_DOING_WRITE |
 384            SDHC_DAT_LINE_ACTIVE | SDHC_DATA_INHIBIT |
 385            SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE);
 386
 387    if (s->norintstsen & SDHC_NISEN_TRSCMP) {
 388        s->norintsts |= SDHC_NIS_TRSCMP;
 389    }
 390
 391    sdhci_update_irq(s);
 392}
 393
 394/*
 395 * Programmed i/o data transfer
 396 */
 397#define BLOCK_SIZE_MASK (4 * KiB - 1)
 398
 399/* Fill host controller's read buffer with BLKSIZE bytes of data from card */
 400static void sdhci_read_block_from_card(SDHCIState *s)
 401{
 402    int index = 0;
 403    uint8_t data;
 404    const uint16_t blk_size = s->blksize & BLOCK_SIZE_MASK;
 405
 406    if ((s->trnmod & SDHC_TRNS_MULTI) &&
 407            (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) {
 408        return;
 409    }
 410
 411    for (index = 0; index < blk_size; index++) {
 412        data = sdbus_read_data(&s->sdbus);
 413        if (!FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, EXECUTE_TUNING)) {
 414            /* Device is not in tuning */
 415            s->fifo_buffer[index] = data;
 416        }
 417    }
 418
 419    if (FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, EXECUTE_TUNING)) {
 420        /* Device is in tuning */
 421        s->hostctl2 &= ~R_SDHC_HOSTCTL2_EXECUTE_TUNING_MASK;
 422        s->hostctl2 |= R_SDHC_HOSTCTL2_SAMPLING_CLKSEL_MASK;
 423        s->prnsts &= ~(SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ |
 424                       SDHC_DATA_INHIBIT);
 425        goto read_done;
 426    }
 427
 428    /* New data now available for READ through Buffer Port Register */
 429    s->prnsts |= SDHC_DATA_AVAILABLE;
 430    if (s->norintstsen & SDHC_NISEN_RBUFRDY) {
 431        s->norintsts |= SDHC_NIS_RBUFRDY;
 432    }
 433
 434    /* Clear DAT line active status if that was the last block */
 435    if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
 436            ((s->trnmod & SDHC_TRNS_MULTI) && s->blkcnt == 1)) {
 437        s->prnsts &= ~SDHC_DAT_LINE_ACTIVE;
 438    }
 439
 440    /* If stop at block gap request was set and it's not the last block of
 441     * data - generate Block Event interrupt */
 442    if (s->stopped_state == sdhc_gap_read && (s->trnmod & SDHC_TRNS_MULTI) &&
 443            s->blkcnt != 1)    {
 444        s->prnsts &= ~SDHC_DAT_LINE_ACTIVE;
 445        if (s->norintstsen & SDHC_EISEN_BLKGAP) {
 446            s->norintsts |= SDHC_EIS_BLKGAP;
 447        }
 448    }
 449
 450read_done:
 451    sdhci_update_irq(s);
 452}
 453
 454/* Read @size byte of data from host controller @s BUFFER DATA PORT register */
 455static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size)
 456{
 457    uint32_t value = 0;
 458    int i;
 459
 460    /* first check that a valid data exists in host controller input buffer */
 461    if ((s->prnsts & SDHC_DATA_AVAILABLE) == 0) {
 462        trace_sdhci_error("read from empty buffer");
 463        return 0;
 464    }
 465
 466    for (i = 0; i < size; i++) {
 467        value |= s->fifo_buffer[s->data_count] << i * 8;
 468        s->data_count++;
 469        /* check if we've read all valid data (blksize bytes) from buffer */
 470        if ((s->data_count) >= (s->blksize & BLOCK_SIZE_MASK)) {
 471            trace_sdhci_read_dataport(s->data_count);
 472            s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */
 473            s->data_count = 0;  /* next buff read must start at position [0] */
 474
 475            if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
 476                s->blkcnt--;
 477            }
 478
 479            /* if that was the last block of data */
 480            if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
 481                ((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) ||
 482                 /* stop at gap request */
 483                (s->stopped_state == sdhc_gap_read &&
 484                 !(s->prnsts & SDHC_DAT_LINE_ACTIVE))) {
 485                sdhci_end_transfer(s);
 486            } else { /* if there are more data, read next block from card */
 487                sdhci_read_block_from_card(s);
 488            }
 489            break;
 490        }
 491    }
 492
 493    return value;
 494}
 495
 496/* Write data from host controller FIFO to card */
 497static void sdhci_write_block_to_card(SDHCIState *s)
 498{
 499    int index = 0;
 500
 501    if (s->prnsts & SDHC_SPACE_AVAILABLE) {
 502        if (s->norintstsen & SDHC_NISEN_WBUFRDY) {
 503            s->norintsts |= SDHC_NIS_WBUFRDY;
 504        }
 505        sdhci_update_irq(s);
 506        return;
 507    }
 508
 509    if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
 510        if (s->blkcnt == 0) {
 511            return;
 512        } else {
 513            s->blkcnt--;
 514        }
 515    }
 516
 517    for (index = 0; index < (s->blksize & BLOCK_SIZE_MASK); index++) {
 518        sdbus_write_data(&s->sdbus, s->fifo_buffer[index]);
 519    }
 520
 521    /* Next data can be written through BUFFER DATORT register */
 522    s->prnsts |= SDHC_SPACE_AVAILABLE;
 523
 524    /* Finish transfer if that was the last block of data */
 525    if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
 526            ((s->trnmod & SDHC_TRNS_MULTI) &&
 527            (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0))) {
 528        sdhci_end_transfer(s);
 529    } else if (s->norintstsen & SDHC_NISEN_WBUFRDY) {
 530        s->norintsts |= SDHC_NIS_WBUFRDY;
 531    }
 532
 533    /* Generate Block Gap Event if requested and if not the last block */
 534    if (s->stopped_state == sdhc_gap_write && (s->trnmod & SDHC_TRNS_MULTI) &&
 535            s->blkcnt > 0) {
 536        s->prnsts &= ~SDHC_DOING_WRITE;
 537        if (s->norintstsen & SDHC_EISEN_BLKGAP) {
 538            s->norintsts |= SDHC_EIS_BLKGAP;
 539        }
 540        sdhci_end_transfer(s);
 541    }
 542
 543    sdhci_update_irq(s);
 544}
 545
 546/* Write @size bytes of @value data to host controller @s Buffer Data Port
 547 * register */
 548static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size)
 549{
 550    unsigned i;
 551
 552    /* Check that there is free space left in a buffer */
 553    if (!(s->prnsts & SDHC_SPACE_AVAILABLE)) {
 554        trace_sdhci_error("Can't write to data buffer: buffer full");
 555        return;
 556    }
 557
 558    for (i = 0; i < size; i++) {
 559        s->fifo_buffer[s->data_count] = value & 0xFF;
 560        s->data_count++;
 561        value >>= 8;
 562        if (s->data_count >= (s->blksize & BLOCK_SIZE_MASK)) {
 563            trace_sdhci_write_dataport(s->data_count);
 564            s->data_count = 0;
 565            s->prnsts &= ~SDHC_SPACE_AVAILABLE;
 566            if (s->prnsts & SDHC_DOING_WRITE) {
 567                sdhci_write_block_to_card(s);
 568            }
 569        }
 570    }
 571}
 572
 573/*
 574 * Single DMA data transfer
 575 */
 576
 577/* Multi block SDMA transfer */
 578static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s)
 579{
 580    bool page_aligned = false;
 581    unsigned int n, begin;
 582    const uint16_t block_size = s->blksize & BLOCK_SIZE_MASK;
 583    uint32_t boundary_chk = 1 << (((s->blksize & ~BLOCK_SIZE_MASK) >> 12) + 12);
 584    uint32_t boundary_count = boundary_chk - (s->sdmasysad % boundary_chk);
 585
 586    if (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || !s->blkcnt) {
 587        qemu_log_mask(LOG_UNIMP, "infinite transfer is not supported\n");
 588        return;
 589    }
 590
 591    /* XXX: Some sd/mmc drivers (for example, u-boot-slp) do not account for
 592     * possible stop at page boundary if initial address is not page aligned,
 593     * allow them to work properly */
 594    if ((s->sdmasysad % boundary_chk) == 0) {
 595        page_aligned = true;
 596    }
 597
 598    if (s->trnmod & SDHC_TRNS_READ) {
 599        s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT |
 600                SDHC_DAT_LINE_ACTIVE;
 601        while (s->blkcnt) {
 602            if (s->data_count == 0) {
 603                for (n = 0; n < block_size; n++) {
 604                    s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
 605                }
 606            }
 607            begin = s->data_count;
 608            if (((boundary_count + begin) < block_size) && page_aligned) {
 609                s->data_count = boundary_count + begin;
 610                boundary_count = 0;
 611             } else {
 612                s->data_count = block_size;
 613                boundary_count -= block_size - begin;
 614                if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
 615                    s->blkcnt--;
 616                }
 617            }
 618            dma_memory_write(s->dma_as, s->sdmasysad,
 619                             &s->fifo_buffer[begin], s->data_count - begin);
 620            s->sdmasysad += s->data_count - begin;
 621            if (s->data_count == block_size) {
 622                s->data_count = 0;
 623            }
 624            if (page_aligned && boundary_count == 0) {
 625                break;
 626            }
 627        }
 628    } else {
 629        s->prnsts |= SDHC_DOING_WRITE | SDHC_DATA_INHIBIT |
 630                SDHC_DAT_LINE_ACTIVE;
 631        while (s->blkcnt) {
 632            begin = s->data_count;
 633            if (((boundary_count + begin) < block_size) && page_aligned) {
 634                s->data_count = boundary_count + begin;
 635                boundary_count = 0;
 636             } else {
 637                s->data_count = block_size;
 638                boundary_count -= block_size - begin;
 639            }
 640            dma_memory_read(s->dma_as, s->sdmasysad,
 641                            &s->fifo_buffer[begin], s->data_count - begin);
 642            s->sdmasysad += s->data_count - begin;
 643            if (s->data_count == block_size) {
 644                for (n = 0; n < block_size; n++) {
 645                    sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
 646                }
 647                s->data_count = 0;
 648                if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
 649                    s->blkcnt--;
 650                }
 651            }
 652            if (page_aligned && boundary_count == 0) {
 653                break;
 654            }
 655        }
 656    }
 657
 658    if (s->blkcnt == 0) {
 659        sdhci_end_transfer(s);
 660    } else {
 661        if (s->norintstsen & SDHC_NISEN_DMA) {
 662            s->norintsts |= SDHC_NIS_DMA;
 663        }
 664        sdhci_update_irq(s);
 665    }
 666}
 667
 668/* single block SDMA transfer */
 669static void sdhci_sdma_transfer_single_block(SDHCIState *s)
 670{
 671    int n;
 672    uint32_t datacnt = s->blksize & BLOCK_SIZE_MASK;
 673
 674    if (s->trnmod & SDHC_TRNS_READ) {
 675        for (n = 0; n < datacnt; n++) {
 676            s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
 677        }
 678        dma_memory_write(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt);
 679    } else {
 680        dma_memory_read(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt);
 681        for (n = 0; n < datacnt; n++) {
 682            sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
 683        }
 684    }
 685    s->blkcnt--;
 686
 687    sdhci_end_transfer(s);
 688}
 689
 690typedef struct ADMADescr {
 691    hwaddr addr;
 692    uint16_t length;
 693    uint8_t attr;
 694    uint8_t incr;
 695} ADMADescr;
 696
 697static void get_adma_description(SDHCIState *s, ADMADescr *dscr)
 698{
 699    uint32_t adma1 = 0;
 700    uint64_t adma2 = 0;
 701    hwaddr entry_addr = (hwaddr)s->admasysaddr;
 702    switch (SDHC_DMA_TYPE(s->hostctl1)) {
 703    case SDHC_CTRL_ADMA2_32:
 704        dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma2,
 705                        sizeof(adma2));
 706        adma2 = le64_to_cpu(adma2);
 707        /* The spec does not specify endianness of descriptor table.
 708         * We currently assume that it is LE.
 709         */
 710        dscr->addr = (hwaddr)extract64(adma2, 32, 32) & ~0x3ull;
 711        dscr->length = (uint16_t)extract64(adma2, 16, 16);
 712        dscr->attr = (uint8_t)extract64(adma2, 0, 7);
 713        dscr->incr = 8;
 714        break;
 715    case SDHC_CTRL_ADMA1_32:
 716        dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma1,
 717                        sizeof(adma1));
 718        adma1 = le32_to_cpu(adma1);
 719        dscr->addr = (hwaddr)(adma1 & 0xFFFFF000);
 720        dscr->attr = (uint8_t)extract32(adma1, 0, 7);
 721        dscr->incr = 4;
 722        if ((dscr->attr & SDHC_ADMA_ATTR_ACT_MASK) == SDHC_ADMA_ATTR_SET_LEN) {
 723            dscr->length = (uint16_t)extract32(adma1, 12, 16);
 724        } else {
 725            dscr->length = 4 * KiB;
 726        }
 727        break;
 728    case SDHC_CTRL_ADMA2_64:
 729        dma_memory_read(s->dma_as, entry_addr,
 730                        (uint8_t *)(&dscr->attr), 1);
 731        dma_memory_read(s->dma_as, entry_addr + 2,
 732                        (uint8_t *)(&dscr->length), 2);
 733        dscr->length = le16_to_cpu(dscr->length);
 734        dma_memory_read(s->dma_as, entry_addr + 4,
 735                        (uint8_t *)(&dscr->addr), 8);
 736        dscr->addr = le64_to_cpu(dscr->addr);
 737        dscr->attr &= (uint8_t) ~0xC0;
 738        dscr->incr = 12;
 739        break;
 740    }
 741}
 742
 743/* Advanced DMA data transfer */
 744
 745static void sdhci_do_adma(SDHCIState *s)
 746{
 747    unsigned int n, begin, length;
 748    const uint16_t block_size = s->blksize & BLOCK_SIZE_MASK;
 749    ADMADescr dscr = {};
 750    int i;
 751
 752    for (i = 0; i < SDHC_ADMA_DESCS_PER_DELAY; ++i) {
 753        s->admaerr &= ~SDHC_ADMAERR_LENGTH_MISMATCH;
 754
 755        get_adma_description(s, &dscr);
 756        trace_sdhci_adma_loop(dscr.addr, dscr.length, dscr.attr);
 757
 758        if ((dscr.attr & SDHC_ADMA_ATTR_VALID) == 0) {
 759            /* Indicate that error occurred in ST_FDS state */
 760            s->admaerr &= ~SDHC_ADMAERR_STATE_MASK;
 761            s->admaerr |= SDHC_ADMAERR_STATE_ST_FDS;
 762
 763            /* Generate ADMA error interrupt */
 764            if (s->errintstsen & SDHC_EISEN_ADMAERR) {
 765                s->errintsts |= SDHC_EIS_ADMAERR;
 766                s->norintsts |= SDHC_NIS_ERR;
 767            }
 768
 769            sdhci_update_irq(s);
 770            return;
 771        }
 772
 773        length = dscr.length ? dscr.length : 64 * KiB;
 774
 775        switch (dscr.attr & SDHC_ADMA_ATTR_ACT_MASK) {
 776        case SDHC_ADMA_ATTR_ACT_TRAN:  /* data transfer */
 777
 778            if (s->trnmod & SDHC_TRNS_READ) {
 779                while (length) {
 780                    if (s->data_count == 0) {
 781                        for (n = 0; n < block_size; n++) {
 782                            s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
 783                        }
 784                    }
 785                    begin = s->data_count;
 786                    if ((length + begin) < block_size) {
 787                        s->data_count = length + begin;
 788                        length = 0;
 789                     } else {
 790                        s->data_count = block_size;
 791                        length -= block_size - begin;
 792                    }
 793                    dma_memory_write(s->dma_as, dscr.addr,
 794                                     &s->fifo_buffer[begin],
 795                                     s->data_count - begin);
 796                    dscr.addr += s->data_count - begin;
 797                    if (s->data_count == block_size) {
 798                        s->data_count = 0;
 799                        if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
 800                            s->blkcnt--;
 801                            if (s->blkcnt == 0) {
 802                                break;
 803                            }
 804                        }
 805                    }
 806                }
 807            } else {
 808                while (length) {
 809                    begin = s->data_count;
 810                    if ((length + begin) < block_size) {
 811                        s->data_count = length + begin;
 812                        length = 0;
 813                     } else {
 814                        s->data_count = block_size;
 815                        length -= block_size - begin;
 816                    }
 817                    dma_memory_read(s->dma_as, dscr.addr,
 818                                    &s->fifo_buffer[begin],
 819                                    s->data_count - begin);
 820                    dscr.addr += s->data_count - begin;
 821                    if (s->data_count == block_size) {
 822                        for (n = 0; n < block_size; n++) {
 823                            sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
 824                        }
 825                        s->data_count = 0;
 826                        if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
 827                            s->blkcnt--;
 828                            if (s->blkcnt == 0) {
 829                                break;
 830                            }
 831                        }
 832                    }
 833                }
 834            }
 835            s->admasysaddr += dscr.incr;
 836            break;
 837        case SDHC_ADMA_ATTR_ACT_LINK:   /* link to next descriptor table */
 838            s->admasysaddr = dscr.addr;
 839            trace_sdhci_adma("link", s->admasysaddr);
 840            break;
 841        default:
 842            s->admasysaddr += dscr.incr;
 843            break;
 844        }
 845
 846        if (dscr.attr & SDHC_ADMA_ATTR_INT) {
 847            trace_sdhci_adma("interrupt", s->admasysaddr);
 848            if (s->norintstsen & SDHC_NISEN_DMA) {
 849                s->norintsts |= SDHC_NIS_DMA;
 850            }
 851
 852            sdhci_update_irq(s);
 853        }
 854
 855        /* ADMA transfer terminates if blkcnt == 0 or by END attribute */
 856        if (((s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
 857                    (s->blkcnt == 0)) || (dscr.attr & SDHC_ADMA_ATTR_END)) {
 858            trace_sdhci_adma_transfer_completed();
 859            if (length || ((dscr.attr & SDHC_ADMA_ATTR_END) &&
 860                (s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
 861                s->blkcnt != 0)) {
 862                trace_sdhci_error("SD/MMC host ADMA length mismatch");
 863                s->admaerr |= SDHC_ADMAERR_LENGTH_MISMATCH |
 864                        SDHC_ADMAERR_STATE_ST_TFR;
 865                if (s->errintstsen & SDHC_EISEN_ADMAERR) {
 866                    trace_sdhci_error("Set ADMA error flag");
 867                    s->errintsts |= SDHC_EIS_ADMAERR;
 868                    s->norintsts |= SDHC_NIS_ERR;
 869                }
 870
 871                sdhci_update_irq(s);
 872            }
 873            sdhci_end_transfer(s);
 874            return;
 875        }
 876
 877    }
 878
 879    /* we have unfinished business - reschedule to continue ADMA */
 880    timer_mod(s->transfer_timer,
 881                   qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_TRANSFER_DELAY);
 882}
 883
 884/* Perform data transfer according to controller configuration */
 885
 886static void sdhci_data_transfer(void *opaque)
 887{
 888    SDHCIState *s = (SDHCIState *)opaque;
 889
 890    if (s->trnmod & SDHC_TRNS_DMA) {
 891        switch (SDHC_DMA_TYPE(s->hostctl1)) {
 892        case SDHC_CTRL_SDMA:
 893            if ((s->blkcnt == 1) || !(s->trnmod & SDHC_TRNS_MULTI)) {
 894                sdhci_sdma_transfer_single_block(s);
 895            } else {
 896                sdhci_sdma_transfer_multi_blocks(s);
 897            }
 898
 899            break;
 900        case SDHC_CTRL_ADMA1_32:
 901            if (!(s->capareg & R_SDHC_CAPAB_ADMA1_MASK)) {
 902                trace_sdhci_error("ADMA1 not supported");
 903                break;
 904            }
 905
 906            sdhci_do_adma(s);
 907            break;
 908        case SDHC_CTRL_ADMA2_32:
 909            if (!(s->capareg & R_SDHC_CAPAB_ADMA2_MASK)) {
 910                trace_sdhci_error("ADMA2 not supported");
 911                break;
 912            }
 913
 914            sdhci_do_adma(s);
 915            break;
 916        case SDHC_CTRL_ADMA2_64:
 917            if (!(s->capareg & R_SDHC_CAPAB_ADMA2_MASK) ||
 918                    !(s->capareg & R_SDHC_CAPAB_BUS64BIT_MASK)) {
 919                trace_sdhci_error("64 bit ADMA not supported");
 920                break;
 921            }
 922
 923            sdhci_do_adma(s);
 924            break;
 925        default:
 926            trace_sdhci_error("Unsupported DMA type");
 927            break;
 928        }
 929    } else {
 930        if ((s->trnmod & SDHC_TRNS_READ) && sdbus_data_ready(&s->sdbus)) {
 931            s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT |
 932                    SDHC_DAT_LINE_ACTIVE;
 933            sdhci_read_block_from_card(s);
 934        } else {
 935            s->prnsts |= SDHC_DOING_WRITE | SDHC_DAT_LINE_ACTIVE |
 936                    SDHC_SPACE_AVAILABLE | SDHC_DATA_INHIBIT;
 937            sdhci_write_block_to_card(s);
 938        }
 939    }
 940}
 941
 942static bool sdhci_can_issue_command(SDHCIState *s)
 943{
 944    if (!SDHC_CLOCK_IS_ON(s->clkcon) ||
 945        (((s->prnsts & SDHC_DATA_INHIBIT) || s->stopped_state) &&
 946        ((s->cmdreg & SDHC_CMD_DATA_PRESENT) ||
 947        ((s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY &&
 948        !(SDHC_COMMAND_TYPE(s->cmdreg) == SDHC_CMD_ABORT))))) {
 949        return false;
 950    }
 951
 952    return true;
 953}
 954
 955/* The Buffer Data Port register must be accessed in sequential and
 956 * continuous manner */
 957static inline bool
 958sdhci_buff_access_is_sequential(SDHCIState *s, unsigned byte_num)
 959{
 960    if ((s->data_count & 0x3) != byte_num) {
 961        trace_sdhci_error("Non-sequential access to Buffer Data Port register"
 962                          "is prohibited\n");
 963        return false;
 964    }
 965    return true;
 966}
 967
 968static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size)
 969{
 970    SDHCIState *s = (SDHCIState *)opaque;
 971    uint32_t ret = 0;
 972
 973    switch (offset & ~0x3) {
 974    case SDHC_SYSAD:
 975        ret = s->sdmasysad;
 976        break;
 977    case SDHC_BLKSIZE:
 978        ret = s->blksize | (s->blkcnt << 16);
 979        break;
 980    case SDHC_ARGUMENT:
 981        ret = s->argument;
 982        break;
 983    case SDHC_TRNMOD:
 984        ret = s->trnmod | (s->cmdreg << 16);
 985        break;
 986    case SDHC_RSPREG0 ... SDHC_RSPREG3:
 987        ret = s->rspreg[((offset & ~0x3) - SDHC_RSPREG0) >> 2];
 988        break;
 989    case  SDHC_BDATA:
 990        if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
 991            ret = sdhci_read_dataport(s, size);
 992            trace_sdhci_access("rd", size << 3, offset, "->", ret, ret);
 993            return ret;
 994        }
 995        break;
 996    case SDHC_PRNSTS:
 997        ret = s->prnsts;
 998        ret = FIELD_DP32(ret, SDHC_PRNSTS, DAT_LVL,
 999                         sdbus_get_dat_lines(&s->sdbus));
1000        ret = FIELD_DP32(ret, SDHC_PRNSTS, CMD_LVL,
1001                         sdbus_get_cmd_line(&s->sdbus));
1002        break;
1003    case SDHC_HOSTCTL:
1004        ret = s->hostctl1 | (s->pwrcon << 8) | (s->blkgap << 16) |
1005              (s->wakcon << 24);
1006        break;
1007    case SDHC_CLKCON:
1008        ret = s->clkcon | (s->timeoutcon << 16);
1009        break;
1010    case SDHC_NORINTSTS:
1011        ret = s->norintsts | (s->errintsts << 16);
1012        break;
1013    case SDHC_NORINTSTSEN:
1014        ret = s->norintstsen | (s->errintstsen << 16);
1015        break;
1016    case SDHC_NORINTSIGEN:
1017        ret = s->norintsigen | (s->errintsigen << 16);
1018        break;
1019    case SDHC_ACMD12ERRSTS:
1020        ret = s->acmd12errsts | (s->hostctl2 << 16);
1021        break;
1022    case SDHC_CAPAB:
1023        ret = (uint32_t)s->capareg;
1024        break;
1025    case SDHC_CAPAB + 4:
1026        ret = (uint32_t)(s->capareg >> 32);
1027        break;
1028    case SDHC_MAXCURR:
1029        ret = (uint32_t)s->maxcurr;
1030        break;
1031    case SDHC_MAXCURR + 4:
1032        ret = (uint32_t)(s->maxcurr >> 32);
1033        break;
1034    case SDHC_ADMAERR:
1035        ret =  s->admaerr;
1036        break;
1037    case SDHC_ADMASYSADDR:
1038        ret = (uint32_t)s->admasysaddr;
1039        break;
1040    case SDHC_ADMASYSADDR + 4:
1041        ret = (uint32_t)(s->admasysaddr >> 32);
1042        break;
1043    case SDHC_SLOT_INT_STATUS:
1044        ret = (s->version << 16) | sdhci_slotint(s);
1045        break;
1046    default:
1047        qemu_log_mask(LOG_UNIMP, "SDHC rd_%ub @0x%02" HWADDR_PRIx " "
1048                      "not implemented\n", size, offset);
1049        break;
1050    }
1051
1052    ret >>= (offset & 0x3) * 8;
1053    ret &= (1ULL << (size * 8)) - 1;
1054    trace_sdhci_access("rd", size << 3, offset, "->", ret, ret);
1055    return ret;
1056}
1057
1058static inline void sdhci_blkgap_write(SDHCIState *s, uint8_t value)
1059{
1060    if ((value & SDHC_STOP_AT_GAP_REQ) && (s->blkgap & SDHC_STOP_AT_GAP_REQ)) {
1061        return;
1062    }
1063    s->blkgap = value & SDHC_STOP_AT_GAP_REQ;
1064
1065    if ((value & SDHC_CONTINUE_REQ) && s->stopped_state &&
1066            (s->blkgap & SDHC_STOP_AT_GAP_REQ) == 0) {
1067        if (s->stopped_state == sdhc_gap_read) {
1068            s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ;
1069            sdhci_read_block_from_card(s);
1070        } else {
1071            s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_WRITE;
1072            sdhci_write_block_to_card(s);
1073        }
1074        s->stopped_state = sdhc_not_stopped;
1075    } else if (!s->stopped_state && (value & SDHC_STOP_AT_GAP_REQ)) {
1076        if (s->prnsts & SDHC_DOING_READ) {
1077            s->stopped_state = sdhc_gap_read;
1078        } else if (s->prnsts & SDHC_DOING_WRITE) {
1079            s->stopped_state = sdhc_gap_write;
1080        }
1081    }
1082}
1083
1084static inline void sdhci_reset_write(SDHCIState *s, uint8_t value)
1085{
1086    switch (value) {
1087    case SDHC_RESET_ALL:
1088        sdhci_reset(s);
1089        break;
1090    case SDHC_RESET_CMD:
1091        s->prnsts &= ~SDHC_CMD_INHIBIT;
1092        s->norintsts &= ~SDHC_NIS_CMDCMP;
1093        break;
1094    case SDHC_RESET_DATA:
1095        s->data_count = 0;
1096        s->prnsts &= ~(SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE |
1097                SDHC_DOING_READ | SDHC_DOING_WRITE |
1098                SDHC_DATA_INHIBIT | SDHC_DAT_LINE_ACTIVE);
1099        s->blkgap &= ~(SDHC_STOP_AT_GAP_REQ | SDHC_CONTINUE_REQ);
1100        s->stopped_state = sdhc_not_stopped;
1101        s->norintsts &= ~(SDHC_NIS_WBUFRDY | SDHC_NIS_RBUFRDY |
1102                SDHC_NIS_DMA | SDHC_NIS_TRSCMP | SDHC_NIS_BLKGAP);
1103        break;
1104    }
1105}
1106
1107static void
1108sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
1109{
1110    SDHCIState *s = (SDHCIState *)opaque;
1111    unsigned shift =  8 * (offset & 0x3);
1112    uint32_t mask = ~(((1ULL << (size * 8)) - 1) << shift);
1113    uint32_t value = val;
1114    value <<= shift;
1115
1116    switch (offset & ~0x3) {
1117    case SDHC_SYSAD:
1118        s->sdmasysad = (s->sdmasysad & mask) | value;
1119        MASKED_WRITE(s->sdmasysad, mask, value);
1120        /* Writing to last byte of sdmasysad might trigger transfer */
1121        if (!(mask & 0xFF000000) && TRANSFERRING_DATA(s->prnsts) && s->blkcnt &&
1122                s->blksize && SDHC_DMA_TYPE(s->hostctl1) == SDHC_CTRL_SDMA) {
1123            if (s->trnmod & SDHC_TRNS_MULTI) {
1124                sdhci_sdma_transfer_multi_blocks(s);
1125            } else {
1126                sdhci_sdma_transfer_single_block(s);
1127            }
1128        }
1129        break;
1130    case SDHC_BLKSIZE:
1131        if (!TRANSFERRING_DATA(s->prnsts)) {
1132            MASKED_WRITE(s->blksize, mask, value);
1133            MASKED_WRITE(s->blkcnt, mask >> 16, value >> 16);
1134        }
1135
1136        /* Limit block size to the maximum buffer size */
1137        if (extract32(s->blksize, 0, 12) > s->buf_maxsz) {
1138            qemu_log_mask(LOG_GUEST_ERROR, "%s: Size 0x%x is larger than " \
1139                          "the maximum buffer 0x%x", __func__, s->blksize,
1140                          s->buf_maxsz);
1141
1142            s->blksize = deposit32(s->blksize, 0, 12, s->buf_maxsz);
1143        }
1144
1145        break;
1146    case SDHC_ARGUMENT:
1147        MASKED_WRITE(s->argument, mask, value);
1148        break;
1149    case SDHC_TRNMOD:
1150        /* DMA can be enabled only if it is supported as indicated by
1151         * capabilities register */
1152        if (!(s->capareg & R_SDHC_CAPAB_SDMA_MASK)) {
1153            value &= ~SDHC_TRNS_DMA;
1154        }
1155        MASKED_WRITE(s->trnmod, mask, value & SDHC_TRNMOD_MASK);
1156        MASKED_WRITE(s->cmdreg, mask >> 16, value >> 16);
1157
1158        /* Writing to the upper byte of CMDREG triggers SD command generation */
1159        if ((mask & 0xFF000000) || !sdhci_can_issue_command(s)) {
1160            break;
1161        }
1162
1163        sdhci_send_command(s);
1164        break;
1165    case  SDHC_BDATA:
1166        if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
1167            sdhci_write_dataport(s, value >> shift, size);
1168        }
1169        break;
1170    case SDHC_HOSTCTL:
1171        if (!(mask & 0xFF0000)) {
1172            sdhci_blkgap_write(s, value >> 16);
1173        }
1174        MASKED_WRITE(s->hostctl1, mask, value);
1175        MASKED_WRITE(s->pwrcon, mask >> 8, value >> 8);
1176        MASKED_WRITE(s->wakcon, mask >> 24, value >> 24);
1177        if (!(s->prnsts & SDHC_CARD_PRESENT) || ((s->pwrcon >> 1) & 0x7) < 5 ||
1178                !(s->capareg & (1 << (31 - ((s->pwrcon >> 1) & 0x7))))) {
1179            s->pwrcon &= ~SDHC_POWER_ON;
1180        }
1181        break;
1182    case SDHC_CLKCON:
1183        if (!(mask & 0xFF000000)) {
1184            sdhci_reset_write(s, value >> 24);
1185        }
1186        MASKED_WRITE(s->clkcon, mask, value);
1187        MASKED_WRITE(s->timeoutcon, mask >> 16, value >> 16);
1188        if (s->clkcon & SDHC_CLOCK_INT_EN) {
1189            s->clkcon |= SDHC_CLOCK_INT_STABLE;
1190        } else {
1191            s->clkcon &= ~SDHC_CLOCK_INT_STABLE;
1192        }
1193        break;
1194    case SDHC_NORINTSTS:
1195        if (s->norintstsen & SDHC_NISEN_CARDINT) {
1196            value &= ~SDHC_NIS_CARDINT;
1197        }
1198        s->norintsts &= mask | ~value;
1199        s->errintsts &= (mask >> 16) | ~(value >> 16);
1200        if (s->errintsts) {
1201            s->norintsts |= SDHC_NIS_ERR;
1202        } else {
1203            s->norintsts &= ~SDHC_NIS_ERR;
1204        }
1205        sdhci_update_irq(s);
1206        break;
1207    case SDHC_NORINTSTSEN:
1208        MASKED_WRITE(s->norintstsen, mask, value);
1209        MASKED_WRITE(s->errintstsen, mask >> 16, value >> 16);
1210        s->norintsts &= s->norintstsen;
1211        s->errintsts &= s->errintstsen;
1212        if (s->errintsts) {
1213            s->norintsts |= SDHC_NIS_ERR;
1214        } else {
1215            s->norintsts &= ~SDHC_NIS_ERR;
1216        }
1217        /* Quirk for Raspberry Pi: pending card insert interrupt
1218         * appears when first enabled after power on */
1219        if ((s->norintstsen & SDHC_NISEN_INSERT) && s->pending_insert_state) {
1220            assert(s->pending_insert_quirk);
1221            s->norintsts |= SDHC_NIS_INSERT;
1222            s->pending_insert_state = false;
1223        }
1224        sdhci_update_irq(s);
1225        break;
1226    case SDHC_NORINTSIGEN:
1227        MASKED_WRITE(s->norintsigen, mask, value);
1228        MASKED_WRITE(s->errintsigen, mask >> 16, value >> 16);
1229        sdhci_update_irq(s);
1230        break;
1231    case SDHC_ADMAERR:
1232        MASKED_WRITE(s->admaerr, mask, value);
1233        break;
1234    case SDHC_ADMASYSADDR:
1235        s->admasysaddr = (s->admasysaddr & (0xFFFFFFFF00000000ULL |
1236                (uint64_t)mask)) | (uint64_t)value;
1237        break;
1238    case SDHC_ADMASYSADDR + 4:
1239        s->admasysaddr = (s->admasysaddr & (0x00000000FFFFFFFFULL |
1240                ((uint64_t)mask << 32))) | ((uint64_t)value << 32);
1241        break;
1242    case SDHC_FEAER:
1243        s->acmd12errsts |= value;
1244        s->errintsts |= (value >> 16) & s->errintstsen;
1245        if (s->acmd12errsts) {
1246            s->errintsts |= SDHC_EIS_CMD12ERR;
1247        }
1248        if (s->errintsts) {
1249            s->norintsts |= SDHC_NIS_ERR;
1250        }
1251        sdhci_update_irq(s);
1252        break;
1253    case SDHC_ACMD12ERRSTS:
1254        MASKED_WRITE(s->acmd12errsts, mask, value & UINT16_MAX);
1255        if (s->uhs_mode >= UHS_I) {
1256            MASKED_WRITE(s->hostctl2, mask >> 16, value >> 16);
1257
1258            if (FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, V18_ENA)) {
1259                sdbus_set_voltage(&s->sdbus, SD_VOLTAGE_1_8V);
1260            } else {
1261                sdbus_set_voltage(&s->sdbus, SD_VOLTAGE_3_3V);
1262            }
1263        }
1264        break;
1265
1266    case SDHC_CAPAB:
1267    case SDHC_CAPAB + 4:
1268    case SDHC_MAXCURR:
1269    case SDHC_MAXCURR + 4:
1270        qemu_log_mask(LOG_GUEST_ERROR, "SDHC wr_%ub @0x%02" HWADDR_PRIx
1271                      " <- 0x%08x read-only\n", size, offset, value >> shift);
1272        break;
1273
1274    default:
1275        qemu_log_mask(LOG_UNIMP, "SDHC wr_%ub @0x%02" HWADDR_PRIx " <- 0x%08x "
1276                      "not implemented\n", size, offset, value >> shift);
1277        break;
1278    }
1279    trace_sdhci_access("wr", size << 3, offset, "<-",
1280                       value >> shift, value >> shift);
1281}
1282
1283static const MemoryRegionOps sdhci_mmio_ops = {
1284    .read = sdhci_read,
1285    .write = sdhci_write,
1286    .valid = {
1287        .min_access_size = 1,
1288        .max_access_size = 4,
1289        .unaligned = false
1290    },
1291    .endianness = DEVICE_LITTLE_ENDIAN,
1292};
1293
1294static void sdhci_init_readonly_registers(SDHCIState *s, Error **errp)
1295{
1296    Error *local_err = NULL;
1297
1298    switch (s->sd_spec_version) {
1299    case 2 ... 3:
1300        break;
1301    default:
1302        error_setg(errp, "Only Spec v2/v3 are supported");
1303        return;
1304    }
1305    s->version = (SDHC_HCVER_VENDOR << 8) | (s->sd_spec_version - 1);
1306
1307    sdhci_check_capareg(s, &local_err);
1308    if (local_err) {
1309        error_propagate(errp, local_err);
1310        return;
1311    }
1312}
1313
1314/* --- qdev common --- */
1315
1316void sdhci_initfn(SDHCIState *s)
1317{
1318    qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
1319                        TYPE_SDHCI_BUS, DEVICE(s), "sd-bus");
1320
1321    s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s);
1322    s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, s);
1323
1324    s->io_ops = &sdhci_mmio_ops;
1325}
1326
1327void sdhci_uninitfn(SDHCIState *s)
1328{
1329    timer_del(s->insert_timer);
1330    timer_free(s->insert_timer);
1331    timer_del(s->transfer_timer);
1332    timer_free(s->transfer_timer);
1333
1334    g_free(s->fifo_buffer);
1335    s->fifo_buffer = NULL;
1336}
1337
1338void sdhci_common_realize(SDHCIState *s, Error **errp)
1339{
1340    Error *local_err = NULL;
1341
1342    sdhci_init_readonly_registers(s, &local_err);
1343    if (local_err) {
1344        error_propagate(errp, local_err);
1345        return;
1346    }
1347    s->buf_maxsz = sdhci_get_fifolen(s);
1348    s->fifo_buffer = g_malloc0(s->buf_maxsz);
1349
1350    memory_region_init_io(&s->iomem, OBJECT(s), s->io_ops, s, "sdhci",
1351                          SDHC_REGISTERS_MAP_SIZE);
1352}
1353
1354void sdhci_common_unrealize(SDHCIState *s, Error **errp)
1355{
1356    /* This function is expected to be called only once for each class:
1357     * - SysBus:    via DeviceClass->unrealize(),
1358     * - PCI:       via PCIDeviceClass->exit().
1359     * However to avoid double-free and/or use-after-free we still nullify
1360     * this variable (better safe than sorry!). */
1361    g_free(s->fifo_buffer);
1362    s->fifo_buffer = NULL;
1363}
1364
1365static bool sdhci_pending_insert_vmstate_needed(void *opaque)
1366{
1367    SDHCIState *s = opaque;
1368
1369    return s->pending_insert_state;
1370}
1371
1372static const VMStateDescription sdhci_pending_insert_vmstate = {
1373    .name = "sdhci/pending-insert",
1374    .version_id = 1,
1375    .minimum_version_id = 1,
1376    .needed = sdhci_pending_insert_vmstate_needed,
1377    .fields = (VMStateField[]) {
1378        VMSTATE_BOOL(pending_insert_state, SDHCIState),
1379        VMSTATE_END_OF_LIST()
1380    },
1381};
1382
1383const VMStateDescription sdhci_vmstate = {
1384    .name = "sdhci",
1385    .version_id = 1,
1386    .minimum_version_id = 1,
1387    .fields = (VMStateField[]) {
1388        VMSTATE_UINT32(sdmasysad, SDHCIState),
1389        VMSTATE_UINT16(blksize, SDHCIState),
1390        VMSTATE_UINT16(blkcnt, SDHCIState),
1391        VMSTATE_UINT32(argument, SDHCIState),
1392        VMSTATE_UINT16(trnmod, SDHCIState),
1393        VMSTATE_UINT16(cmdreg, SDHCIState),
1394        VMSTATE_UINT32_ARRAY(rspreg, SDHCIState, 4),
1395        VMSTATE_UINT32(prnsts, SDHCIState),
1396        VMSTATE_UINT8(hostctl1, SDHCIState),
1397        VMSTATE_UINT8(pwrcon, SDHCIState),
1398        VMSTATE_UINT8(blkgap, SDHCIState),
1399        VMSTATE_UINT8(wakcon, SDHCIState),
1400        VMSTATE_UINT16(clkcon, SDHCIState),
1401        VMSTATE_UINT8(timeoutcon, SDHCIState),
1402        VMSTATE_UINT8(admaerr, SDHCIState),
1403        VMSTATE_UINT16(norintsts, SDHCIState),
1404        VMSTATE_UINT16(errintsts, SDHCIState),
1405        VMSTATE_UINT16(norintstsen, SDHCIState),
1406        VMSTATE_UINT16(errintstsen, SDHCIState),
1407        VMSTATE_UINT16(norintsigen, SDHCIState),
1408        VMSTATE_UINT16(errintsigen, SDHCIState),
1409        VMSTATE_UINT16(acmd12errsts, SDHCIState),
1410        VMSTATE_UINT16(data_count, SDHCIState),
1411        VMSTATE_UINT64(admasysaddr, SDHCIState),
1412        VMSTATE_UINT8(stopped_state, SDHCIState),
1413        VMSTATE_VBUFFER_UINT32(fifo_buffer, SDHCIState, 1, NULL, buf_maxsz),
1414        VMSTATE_TIMER_PTR(insert_timer, SDHCIState),
1415        VMSTATE_TIMER_PTR(transfer_timer, SDHCIState),
1416        VMSTATE_END_OF_LIST()
1417    },
1418    .subsections = (const VMStateDescription*[]) {
1419        &sdhci_pending_insert_vmstate,
1420        NULL
1421    },
1422};
1423
1424void sdhci_common_class_init(ObjectClass *klass, void *data)
1425{
1426    DeviceClass *dc = DEVICE_CLASS(klass);
1427
1428    set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
1429    dc->vmsd = &sdhci_vmstate;
1430    dc->reset = sdhci_poweron_reset;
1431}
1432
1433/* --- qdev SysBus --- */
1434
1435static Property sdhci_sysbus_properties[] = {
1436    DEFINE_SDHCI_COMMON_PROPERTIES(SDHCIState),
1437    DEFINE_PROP_BOOL("pending-insert-quirk", SDHCIState, pending_insert_quirk,
1438                     false),
1439    DEFINE_PROP_LINK("dma", SDHCIState,
1440                     dma_mr, TYPE_MEMORY_REGION, MemoryRegion *),
1441    DEFINE_PROP_END_OF_LIST(),
1442};
1443
1444static void sdhci_sysbus_init(Object *obj)
1445{
1446    SDHCIState *s = SYSBUS_SDHCI(obj);
1447
1448    sdhci_initfn(s);
1449}
1450
1451static void sdhci_sysbus_finalize(Object *obj)
1452{
1453    SDHCIState *s = SYSBUS_SDHCI(obj);
1454
1455    if (s->dma_mr) {
1456        object_unparent(OBJECT(s->dma_mr));
1457    }
1458
1459    sdhci_uninitfn(s);
1460}
1461
1462static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp)
1463{
1464    SDHCIState *s = SYSBUS_SDHCI(dev);
1465    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
1466    Error *local_err = NULL;
1467
1468    sdhci_common_realize(s, &local_err);
1469    if (local_err) {
1470        error_propagate(errp, local_err);
1471        return;
1472    }
1473
1474    if (s->dma_mr) {
1475        s->dma_as = &s->sysbus_dma_as;
1476        address_space_init(s->dma_as, s->dma_mr, "sdhci-dma");
1477    } else {
1478        /* use system_memory() if property "dma" not set */
1479        s->dma_as = &address_space_memory;
1480    }
1481
1482    sysbus_init_irq(sbd, &s->irq);
1483
1484    sysbus_init_mmio(sbd, &s->iomem);
1485}
1486
1487static void sdhci_sysbus_unrealize(DeviceState *dev, Error **errp)
1488{
1489    SDHCIState *s = SYSBUS_SDHCI(dev);
1490
1491    sdhci_common_unrealize(s, &error_abort);
1492
1493     if (s->dma_mr) {
1494        address_space_destroy(s->dma_as);
1495    }
1496}
1497
1498static void sdhci_sysbus_class_init(ObjectClass *klass, void *data)
1499{
1500    DeviceClass *dc = DEVICE_CLASS(klass);
1501
1502    dc->props = sdhci_sysbus_properties;
1503    dc->realize = sdhci_sysbus_realize;
1504    dc->unrealize = sdhci_sysbus_unrealize;
1505
1506    sdhci_common_class_init(klass, data);
1507}
1508
1509static const TypeInfo sdhci_sysbus_info = {
1510    .name = TYPE_SYSBUS_SDHCI,
1511    .parent = TYPE_SYS_BUS_DEVICE,
1512    .instance_size = sizeof(SDHCIState),
1513    .instance_init = sdhci_sysbus_init,
1514    .instance_finalize = sdhci_sysbus_finalize,
1515    .class_init = sdhci_sysbus_class_init,
1516};
1517
1518/* --- qdev bus master --- */
1519
1520static void sdhci_bus_class_init(ObjectClass *klass, void *data)
1521{
1522    SDBusClass *sbc = SD_BUS_CLASS(klass);
1523
1524    sbc->set_inserted = sdhci_set_inserted;
1525    sbc->set_readonly = sdhci_set_readonly;
1526}
1527
1528static const TypeInfo sdhci_bus_info = {
1529    .name = TYPE_SDHCI_BUS,
1530    .parent = TYPE_SD_BUS,
1531    .instance_size = sizeof(SDBus),
1532    .class_init = sdhci_bus_class_init,
1533};
1534
1535/* --- qdev i.MX eSDHC --- */
1536
1537static uint64_t usdhc_read(void *opaque, hwaddr offset, unsigned size)
1538{
1539    SDHCIState *s = SYSBUS_SDHCI(opaque);
1540    uint32_t ret;
1541    uint16_t hostctl1;
1542
1543    switch (offset) {
1544    default:
1545        return sdhci_read(opaque, offset, size);
1546
1547    case SDHC_HOSTCTL:
1548        /*
1549         * For a detailed explanation on the following bit
1550         * manipulation code see comments in a similar part of
1551         * usdhc_write()
1552         */
1553        hostctl1 = SDHC_DMA_TYPE(s->hostctl1) << (8 - 3);
1554
1555        if (s->hostctl1 & SDHC_CTRL_8BITBUS) {
1556            hostctl1 |= ESDHC_CTRL_8BITBUS;
1557        }
1558
1559        if (s->hostctl1 & SDHC_CTRL_4BITBUS) {
1560            hostctl1 |= ESDHC_CTRL_4BITBUS;
1561        }
1562
1563        ret  = hostctl1;
1564        ret |= (uint32_t)s->blkgap << 16;
1565        ret |= (uint32_t)s->wakcon << 24;
1566
1567        break;
1568
1569    case SDHC_PRNSTS:
1570        /* Add SDSTB (SD Clock Stable) bit to PRNSTS */
1571        ret = sdhci_read(opaque, offset, size) & ~ESDHC_PRNSTS_SDSTB;
1572        if (s->clkcon & SDHC_CLOCK_INT_STABLE) {
1573            ret |= ESDHC_PRNSTS_SDSTB;
1574        }
1575        break;
1576
1577    case ESDHC_DLL_CTRL:
1578    case ESDHC_TUNE_CTRL_STATUS:
1579    case ESDHC_UNDOCUMENTED_REG27:
1580    case ESDHC_TUNING_CTRL:
1581    case ESDHC_VENDOR_SPEC:
1582    case ESDHC_MIX_CTRL:
1583    case ESDHC_WTMK_LVL:
1584        ret = 0;
1585        break;
1586    }
1587
1588    return ret;
1589}
1590
1591static void
1592usdhc_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
1593{
1594    SDHCIState *s = SYSBUS_SDHCI(opaque);
1595    uint8_t hostctl1;
1596    uint32_t value = (uint32_t)val;
1597
1598    switch (offset) {
1599    case ESDHC_DLL_CTRL:
1600    case ESDHC_TUNE_CTRL_STATUS:
1601    case ESDHC_UNDOCUMENTED_REG27:
1602    case ESDHC_TUNING_CTRL:
1603    case ESDHC_WTMK_LVL:
1604    case ESDHC_VENDOR_SPEC:
1605        break;
1606
1607    case SDHC_HOSTCTL:
1608        /*
1609         * Here's What ESDHCI has at offset 0x28 (SDHC_HOSTCTL)
1610         *
1611         *       7         6     5      4      3      2        1      0
1612         * |-----------+--------+--------+-----------+----------+---------|
1613         * | Card      | Card   | Endian | DATA3     | Data     | Led     |
1614         * | Detect    | Detect | Mode   | as Card   | Transfer | Control |
1615         * | Signal    | Test   |        | Detection | Width    |         |
1616         * | Selection | Level  |        | Pin       |          |         |
1617         * |-----------+--------+--------+-----------+----------+---------|
1618         *
1619         * and 0x29
1620         *
1621         *  15      10 9    8
1622         * |----------+------|
1623         * | Reserved | DMA  |
1624         * |          | Sel. |
1625         * |          |      |
1626         * |----------+------|
1627         *
1628         * and here's what SDCHI spec expects those offsets to be:
1629         *
1630         * 0x28 (Host Control Register)
1631         *
1632         *     7        6         5       4  3      2         1        0
1633         * |--------+--------+----------+------+--------+----------+---------|
1634         * | Card   | Card   | Extended | DMA  | High   | Data     | LED     |
1635         * | Detect | Detect | Data     | Sel. | Speed  | Transfer | Control |
1636         * | Signal | Test   | Transfer |      | Enable | Width    |         |
1637         * | Sel.   | Level  | Width    |      |        |          |         |
1638         * |--------+--------+----------+------+--------+----------+---------|
1639         *
1640         * and 0x29 (Power Control Register)
1641         *
1642         * |----------------------------------|
1643         * | Power Control Register           |
1644         * |                                  |
1645         * | Description omitted,             |
1646         * | since it has no analog in ESDHCI |
1647         * |                                  |
1648         * |----------------------------------|
1649         *
1650         * Since offsets 0x2A and 0x2B should be compatible between
1651         * both IP specs we only need to reconcile least 16-bit of the
1652         * word we've been given.
1653         */
1654
1655        /*
1656         * First, save bits 7 6 and 0 since they are identical
1657         */
1658        hostctl1 = value & (SDHC_CTRL_LED |
1659                            SDHC_CTRL_CDTEST_INS |
1660                            SDHC_CTRL_CDTEST_EN);
1661        /*
1662         * Second, split "Data Transfer Width" from bits 2 and 1 in to
1663         * bits 5 and 1
1664         */
1665        if (value & ESDHC_CTRL_8BITBUS) {
1666            hostctl1 |= SDHC_CTRL_8BITBUS;
1667        }
1668
1669        if (value & ESDHC_CTRL_4BITBUS) {
1670            hostctl1 |= ESDHC_CTRL_4BITBUS;
1671        }
1672
1673        /*
1674         * Third, move DMA select from bits 9 and 8 to bits 4 and 3
1675         */
1676        hostctl1 |= SDHC_DMA_TYPE(value >> (8 - 3));
1677
1678        /*
1679         * Now place the corrected value into low 16-bit of the value
1680         * we are going to give standard SDHCI write function
1681         *
1682         * NOTE: This transformation should be the inverse of what can
1683         * be found in drivers/mmc/host/sdhci-esdhc-imx.c in Linux
1684         * kernel
1685         */
1686        value &= ~UINT16_MAX;
1687        value |= hostctl1;
1688        value |= (uint16_t)s->pwrcon << 8;
1689
1690        sdhci_write(opaque, offset, value, size);
1691        break;
1692
1693    case ESDHC_MIX_CTRL:
1694        /*
1695         * So, when SD/MMC stack in Linux tries to write to "Transfer
1696         * Mode Register", ESDHC i.MX quirk code will translate it
1697         * into a write to ESDHC_MIX_CTRL, so we do the opposite in
1698         * order to get where we started
1699         *
1700         * Note that Auto CMD23 Enable bit is located in a wrong place
1701         * on i.MX, but since it is not used by QEMU we do not care.
1702         *
1703         * We don't want to call sdhci_write(.., SDHC_TRNMOD, ...)
1704         * here becuase it will result in a call to
1705         * sdhci_send_command(s) which we don't want.
1706         *
1707         */
1708        s->trnmod = value & UINT16_MAX;
1709        break;
1710    case SDHC_TRNMOD:
1711        /*
1712         * Similar to above, but this time a write to "Command
1713         * Register" will be translated into a 4-byte write to
1714         * "Transfer Mode register" where lower 16-bit of value would
1715         * be set to zero. So what we do is fill those bits with
1716         * cached value from s->trnmod and let the SDHCI
1717         * infrastructure handle the rest
1718         */
1719        sdhci_write(opaque, offset, val | s->trnmod, size);
1720        break;
1721    case SDHC_BLKSIZE:
1722        /*
1723         * ESDHCI does not implement "Host SDMA Buffer Boundary", and
1724         * Linux driver will try to zero this field out which will
1725         * break the rest of SDHCI emulation.
1726         *
1727         * Linux defaults to maximum possible setting (512K boundary)
1728         * and it seems to be the only option that i.MX IP implements,
1729         * so we artificially set it to that value.
1730         */
1731        val |= 0x7 << 12;
1732        /* FALLTHROUGH */
1733    default:
1734        sdhci_write(opaque, offset, val, size);
1735        break;
1736    }
1737}
1738
1739static const MemoryRegionOps usdhc_mmio_ops = {
1740    .read = usdhc_read,
1741    .write = usdhc_write,
1742    .valid = {
1743        .min_access_size = 1,
1744        .max_access_size = 4,
1745        .unaligned = false
1746    },
1747    .endianness = DEVICE_LITTLE_ENDIAN,
1748};
1749
1750static void imx_usdhc_init(Object *obj)
1751{
1752    SDHCIState *s = SYSBUS_SDHCI(obj);
1753
1754    s->io_ops = &usdhc_mmio_ops;
1755    s->quirks = SDHCI_QUIRK_NO_BUSY_IRQ;
1756}
1757
1758static const TypeInfo imx_usdhc_info = {
1759    .name = TYPE_IMX_USDHC,
1760    .parent = TYPE_SYSBUS_SDHCI,
1761    .instance_init = imx_usdhc_init,
1762};
1763
1764/* --- qdev Samsung s3c --- */
1765
1766#define S3C_SDHCI_CONTROL2      0x80
1767#define S3C_SDHCI_CONTROL3      0x84
1768#define S3C_SDHCI_CONTROL4      0x8c
1769
1770static uint64_t sdhci_s3c_read(void *opaque, hwaddr offset, unsigned size)
1771{
1772    uint64_t ret;
1773
1774    switch (offset) {
1775    case S3C_SDHCI_CONTROL2:
1776    case S3C_SDHCI_CONTROL3:
1777    case S3C_SDHCI_CONTROL4:
1778        /* ignore */
1779        ret = 0;
1780        break;
1781    default:
1782        ret = sdhci_read(opaque, offset, size);
1783        break;
1784    }
1785
1786    return ret;
1787}
1788
1789static void sdhci_s3c_write(void *opaque, hwaddr offset, uint64_t val,
1790                            unsigned size)
1791{
1792    switch (offset) {
1793    case S3C_SDHCI_CONTROL2:
1794    case S3C_SDHCI_CONTROL3:
1795    case S3C_SDHCI_CONTROL4:
1796        /* ignore */
1797        break;
1798    default:
1799        sdhci_write(opaque, offset, val, size);
1800        break;
1801    }
1802}
1803
1804static const MemoryRegionOps sdhci_s3c_mmio_ops = {
1805    .read = sdhci_s3c_read,
1806    .write = sdhci_s3c_write,
1807    .valid = {
1808        .min_access_size = 1,
1809        .max_access_size = 4,
1810        .unaligned = false
1811    },
1812    .endianness = DEVICE_LITTLE_ENDIAN,
1813};
1814
1815static void sdhci_s3c_init(Object *obj)
1816{
1817    SDHCIState *s = SYSBUS_SDHCI(obj);
1818
1819    s->io_ops = &sdhci_s3c_mmio_ops;
1820}
1821
1822static const TypeInfo sdhci_s3c_info = {
1823    .name = TYPE_S3C_SDHCI  ,
1824    .parent = TYPE_SYSBUS_SDHCI,
1825    .instance_init = sdhci_s3c_init,
1826};
1827
1828static void sdhci_register_types(void)
1829{
1830    type_register_static(&sdhci_sysbus_info);
1831    type_register_static(&sdhci_bus_info);
1832    type_register_static(&imx_usdhc_info);
1833    type_register_static(&sdhci_s3c_info);
1834}
1835
1836type_init(sdhci_register_types)
1837