LXR qemu/tests/qtest/boot-serial-test.c

   1/*
   2 * Test serial output of some machines.
   3 *
   4 * Copyright 2016 Thomas Huth, Red Hat Inc.
   5 *
   6 * This work is licensed under the terms of the GNU GPL, version 2
   7 * or later. See the COPYING file in the top-level directory.
   8 *
   9 * This test is used to check that the serial output of the firmware
  10 * (that we provide for some machines) or some small mini-kernels that
  11 * we provide here contains an expected string. Thus we check that the
  12 * firmware/kernel still boots at least to a certain point and so we
  13 * know that the machine is not completely broken.
  14 */
  15
  16#include "qemu/osdep.h"
  17#include "libqos/libqtest.h"
  18#include "libqos/libqos-spapr.h"
  19
  20static const uint8_t bios_avr[] = {
  21    0x88, 0xe0,             /* ldi r24, 0x08   */
  22    0x80, 0x93, 0xc1, 0x00, /* sts 0x00C1, r24 ; Enable tx */
  23    0x86, 0xe0,             /* ldi r24, 0x06   */
  24    0x80, 0x93, 0xc2, 0x00, /* sts 0x00C2, r24 ; Set the data bits to 8 */
  25    0x84, 0xe5,             /* ldi r24, 0x54   */
  26    0x80, 0x93, 0xc6, 0x00, /* sts 0x00C6, r24 ; Output 'T' */
  27};
  28
  29static const uint8_t kernel_mcf5208[] = {
  30    0x41, 0xf9, 0xfc, 0x06, 0x00, 0x00,     /* lea 0xfc060000,%a0 */
  31    0x10, 0x3c, 0x00, 0x54,                 /* move.b #'T',%d0 */
  32    0x11, 0x7c, 0x00, 0x04, 0x00, 0x08,     /* move.b #4,8(%a0)     Enable TX */
  33    0x11, 0x40, 0x00, 0x0c,                 /* move.b %d0,12(%a0)   Print 'T' */
  34    0x60, 0xfa                              /* bra.s  loop */
  35};
  36
  37static const uint8_t bios_nextcube[] = {
  38    0x06, 0x00, 0x00, 0x00,                 /* Initial SP */
  39    0x01, 0x00, 0x00, 0x08,                 /* Initial PC */
  40    0x41, 0xf9, 0x02, 0x11, 0x80, 0x00,     /* lea 0x02118000,%a0 */
  41    0x10, 0x3c, 0x00, 0x54,                 /* move.b #'T',%d0 */
  42    0x11, 0x7c, 0x00, 0x05, 0x00, 0x01,     /* move.b #5,1(%a0)    Sel TXCTRL */
  43    0x11, 0x7c, 0x00, 0x68, 0x00, 0x01,     /* move.b #0x68,1(%a0) Enable TX */
  44    0x11, 0x40, 0x00, 0x03,                 /* move.b %d0,3(%a0)   Print 'T' */
  45    0x60, 0xfa                              /* bra.s  loop */
  46};
  47
  48static const uint8_t kernel_pls3adsp1800[] = {
  49    0xb0, 0x00, 0x84, 0x00,                 /* imm   0x8400 */
  50    0x30, 0x60, 0x00, 0x04,                 /* addik r3,r0,4 */
  51    0x30, 0x80, 0x00, 0x54,                 /* addik r4,r0,'T' */
  52    0xf0, 0x83, 0x00, 0x00,                 /* sbi   r4,r3,0 */
  53    0xb8, 0x00, 0xff, 0xfc                  /* bri   -4  loop */
  54};
  55
  56static const uint8_t kernel_plml605[] = {
  57    0xe0, 0x83, 0x00, 0xb0,                 /* imm   0x83e0 */
  58    0x00, 0x10, 0x60, 0x30,                 /* addik r3,r0,0x1000 */
  59    0x54, 0x00, 0x80, 0x30,                 /* addik r4,r0,'T' */
  60    0x00, 0x00, 0x83, 0xf0,                 /* sbi   r4,r3,0 */
  61    0xfc, 0xff, 0x00, 0xb8                  /* bri   -4  loop */
  62};
  63
  64static const uint8_t bios_raspi2[] = {
  65    0x08, 0x30, 0x9f, 0xe5,                 /* ldr   r3,[pc,#8]    Get base */
  66    0x54, 0x20, 0xa0, 0xe3,                 /* mov     r2,#'T' */
  67    0x00, 0x20, 0xc3, 0xe5,                 /* strb    r2,[r3] */
  68    0xfb, 0xff, 0xff, 0xea,                 /* b       loop */
  69    0x00, 0x10, 0x20, 0x3f,                 /* 0x3f201000 = UART0 base addr */
  70};
  71
  72static const uint8_t kernel_aarch64[] = {
  73    0x81, 0x0a, 0x80, 0x52,                 /* mov     w1, #0x54 */
  74    0x02, 0x20, 0xa1, 0xd2,                 /* mov     x2, #0x9000000 */
  75    0x41, 0x00, 0x00, 0x39,                 /* strb    w1, [x2] */
  76    0xfd, 0xff, 0xff, 0x17,                 /* b       -12 (loop) */
  77};
  78
  79static const uint8_t kernel_nrf51[] = {
  80    0x00, 0x00, 0x00, 0x00,                 /* Stack top address */
  81    0x09, 0x00, 0x00, 0x00,                 /* Reset handler address */
  82    0x04, 0x4a,                             /* ldr  r2, [pc, #16] Get ENABLE */
  83    0x04, 0x21,                             /* movs r1, #4 */
  84    0x11, 0x60,                             /* str  r1, [r2] */
  85    0x04, 0x4a,                             /* ldr  r2, [pc, #16] Get STARTTX */
  86    0x01, 0x21,                             /* movs r1, #1 */
  87    0x11, 0x60,                             /* str  r1, [r2] */
  88    0x03, 0x4a,                             /* ldr  r2, [pc, #12] Get TXD */
  89    0x54, 0x21,                             /* movs r1, 'T' */
  90    0x11, 0x60,                             /* str  r1, [r2] */
  91    0xfe, 0xe7,                             /* b    . */
  92    0x00, 0x25, 0x00, 0x40,                 /* 0x40002500 = UART ENABLE */
  93    0x08, 0x20, 0x00, 0x40,                 /* 0x40002008 = UART STARTTX */
  94    0x1c, 0x25, 0x00, 0x40                  /* 0x4000251c = UART TXD */
  95};
  96
  97static const uint8_t kernel_stm32vldiscovery[] = {
  98    0x00, 0x00, 0x00, 0x00,                 /* Stack top address */
  99    0x1d, 0x00, 0x00, 0x00,                 /* Reset handler address */
 100    0x00, 0x00, 0x00, 0x00,                 /* NMI */
 101    0x00, 0x00, 0x00, 0x00,                 /* Hard fault */
 102    0x00, 0x00, 0x00, 0x00,                 /* Memory management fault */
 103    0x00, 0x00, 0x00, 0x00,                 /* Bus fault */
 104    0x00, 0x00, 0x00, 0x00,                 /* Usage fault */
 105    0x0b, 0x4b,                             /* ldr  r3, [pc, #44] Get RCC */
 106    0x44, 0xf2, 0x04, 0x02,                 /* movw r2, #16388 */
 107    0x1a, 0x60,                             /* str  r2, [r3] */
 108    0x0a, 0x4b,                             /* ldr  r3, [pc, #40] Get GPIOA */
 109    0x1a, 0x68,                             /* ldr  r2, [r3] */
 110    0x22, 0xf0, 0xf0, 0x02,                 /* bic  r2, r2, #240 */
 111    0x1a, 0x60,                             /* str  r2, [r3] */
 112    0x1a, 0x68,                             /* ldr  r2, [r3] */
 113    0x42, 0xf0, 0xb0, 0x02,                 /* orr  r2, r2, #176 */
 114    0x1a, 0x60,                             /* str  r2, [r3] */
 115    0x07, 0x4b,                             /* ldr  r3, [pc, #26] Get BAUD */
 116    0x45, 0x22,                             /* movs r2, #69 */
 117    0x1a, 0x60,                             /* str  r2, [r3] */
 118    0x06, 0x4b,                             /* ldr  r3, [pc, #24] Get ENABLE */
 119    0x42, 0xf2, 0x08, 0x02,                 /* movw r2, #8200 */
 120    0x1a, 0x60,                             /* str  r2, [r3] */
 121    0x05, 0x4b,                             /* ldr  r3, [pc, #20] Get TXD */
 122    0x54, 0x22,                             /* movs r2, 'T' */
 123    0x1a, 0x60,                             /* str  r2, [r3] */
 124    0xfe, 0xe7,                             /* b    . */
 125    0x18, 0x10, 0x02, 0x40,                 /* 0x40021018 = RCC */
 126    0x04, 0x08, 0x01, 0x40,                 /* 0x40010804 = GPIOA */
 127    0x08, 0x38, 0x01, 0x40,                 /* 0x40013808 = USART1 BAUD */
 128    0x0c, 0x38, 0x01, 0x40,                 /* 0x4001380c = USART1 ENABLE */
 129    0x04, 0x38, 0x01, 0x40                  /* 0x40013804 = USART1 TXD */
 130};
 131
 132typedef struct testdef {
 133    const char *arch;       /* Target architecture */
 134    const char *machine;    /* Name of the machine */
 135    const char *extra;      /* Additional parameters */
 136    const char *expect;     /* Expected string in the serial output */
 137    size_t codesize;        /* Size of the kernel or bios data */
 138    const uint8_t *kernel;  /* Set in case we use our own mini kernel */
 139    const uint8_t *bios;    /* Set in case we use our own mini bios */
 140} testdef_t;
 141
 142static testdef_t tests[] = {
 143    { "alpha", "clipper", "", "PCI:" },
 144    { "avr", "arduino-duemilanove", "", "T", sizeof(bios_avr), NULL, bios_avr },
 145    { "avr", "arduino-mega-2560-v3", "", "T", sizeof(bios_avr), NULL, bios_avr},
 146    { "ppc", "ppce500", "", "U-Boot" },
 147    { "ppc", "40p", "-vga none -boot d", "Trying cd:," },
 148    { "ppc", "g3beige", "", "PowerPC,750" },
 149    { "ppc", "mac99", "", "PowerPC,G4" },
 150    { "ppc", "sam460ex", "-m 256", "DRAM:  256 MiB" },
 151    { "ppc64", "ppce500", "", "U-Boot" },
 152    { "ppc64", "40p", "-m 192", "Memory: 192M" },
 153    { "ppc64", "mac99", "", "PowerPC,970FX" },
 154    { "ppc64", "pseries",
 155      "-machine " PSERIES_DEFAULT_CAPABILITIES,
 156      "Open Firmware" },
 157    { "ppc64", "powernv8", "", "OPAL" },
 158    { "ppc64", "powernv9", "", "OPAL" },
 159    { "ppc64", "sam460ex", "-device e1000", "8086  100e" },
 160    { "i386", "isapc", "-cpu qemu32 -device sga", "SGABIOS" },
 161    { "i386", "pc", "-device sga", "SGABIOS" },
 162    { "i386", "q35", "-device sga", "SGABIOS" },
 163    { "x86_64", "isapc", "-cpu qemu32 -device sga", "SGABIOS" },
 164    { "x86_64", "q35", "-device sga", "SGABIOS" },
 165    { "sparc", "LX", "", "TMS390S10" },
 166    { "sparc", "SS-4", "", "MB86904" },
 167    { "sparc", "SS-600MP", "", "TMS390Z55" },
 168    { "sparc64", "sun4u", "", "UltraSPARC" },
 169    { "s390x", "s390-ccw-virtio", "", "device" },
 170    { "m68k", "mcf5208evb", "", "TT", sizeof(kernel_mcf5208), kernel_mcf5208 },
 171    { "m68k", "next-cube", "", "TT", sizeof(bios_nextcube), 0, bios_nextcube },
 172    { "microblaze", "petalogix-s3adsp1800", "", "TT",
 173      sizeof(kernel_pls3adsp1800), kernel_pls3adsp1800 },
 174    { "microblazeel", "petalogix-ml605", "", "TT",
 175      sizeof(kernel_plml605), kernel_plml605 },
 176    { "arm", "raspi2", "", "TT", sizeof(bios_raspi2), 0, bios_raspi2 },
 177    /* For hppa, force bios to output to serial by disabling graphics. */
 178    { "hppa", "hppa", "-vga none", "SeaBIOS wants SYSTEM HALT" },
 179    { "aarch64", "virt", "-cpu max", "TT", sizeof(kernel_aarch64),
 180      kernel_aarch64 },
 181    { "arm", "microbit", "", "T", sizeof(kernel_nrf51), kernel_nrf51 },
 182    { "arm", "stm32vldiscovery", "", "T",
 183      sizeof(kernel_stm32vldiscovery), kernel_stm32vldiscovery },
 184
 185    { NULL }
 186};
 187
 188static bool check_guest_output(QTestState *qts, const testdef_t *test, int fd)
 189{
 190    int nbr = 0, pos = 0, ccnt;
 191    time_t now, start = time(NULL);
 192    char ch;
 193
 194    /* Poll serial output... */
 195    while (1) {
 196        ccnt = 0;
 197        while (ccnt++ < 512 && (nbr = read(fd, &ch, 1)) == 1) {
 198            if (ch == test->expect[pos]) {
 199                pos += 1;
 200                if (test->expect[pos] == '\0') {
 201                    /* We've reached the end of the expected string! */
 202                    return true;
 203                }
 204            } else {
 205                pos = 0;
 206            }
 207        }
 208        g_assert(nbr >= 0);
 209        /* Wait only if the child is still alive.  */
 210        if (!qtest_probe_child(qts)) {
 211            break;
 212        }
 213        /* Wait at most 360 seconds.  */
 214        now = time(NULL);
 215        if (now - start >= 360) {
 216            break;
 217        }
 218        g_usleep(10000);
 219    }
 220
 221    return false;
 222}
 223
 224static void test_machine(const void *data)
 225{
 226    const testdef_t *test = data;
 227    char serialtmp[] = "/tmp/qtest-boot-serial-sXXXXXX";
 228    char codetmp[] = "/tmp/qtest-boot-serial-cXXXXXX";
 229    const char *codeparam = "";
 230    const uint8_t *code = NULL;
 231    QTestState *qts;
 232    int ser_fd;
 233
 234    ser_fd = mkstemp(serialtmp);
 235    g_assert(ser_fd != -1);
 236
 237    if (test->kernel) {
 238        code = test->kernel;
 239        codeparam = "-kernel";
 240    } else if (test->bios) {
 241        code = test->bios;
 242        codeparam = "-bios";
 243    }
 244
 245    if (code) {
 246        ssize_t wlen;
 247        int code_fd;
 248
 249        code_fd = mkstemp(codetmp);
 250        g_assert(code_fd != -1);
 251        wlen = write(code_fd, code, test->codesize);
 252        g_assert(wlen == test->codesize);
 253        close(code_fd);
 254    }
 255
 256    /*
 257     * Make sure that this test uses tcg if available: It is used as a
 258     * fast-enough smoketest for that.
 259     */
 260    qts = qtest_initf("%s %s -M %s -no-shutdown "
 261                      "-chardev file,id=serial0,path=%s "
 262                      "-serial chardev:serial0 -accel tcg -accel kvm %s",
 263                      codeparam, code ? codetmp : "", test->machine,
 264                      serialtmp, test->extra);
 265    if (code) {
 266        unlink(codetmp);
 267    }
 268
 269    if (!check_guest_output(qts, test, ser_fd)) {
 270        g_error("Failed to find expected string. Please check '%s'",
 271                serialtmp);
 272    }
 273    unlink(serialtmp);
 274
 275    qtest_quit(qts);
 276
 277    close(ser_fd);
 278}
 279
 280int main(int argc, char *argv[])
 281{
 282    const char *arch = qtest_get_arch();
 283    int i;
 284
 285    g_test_init(&argc, &argv, NULL);
 286
 287    for (i = 0; tests[i].arch != NULL; i++) {
 288        if (strcmp(arch, tests[i].arch) == 0) {
 289            char *name = g_strdup_printf("boot-serial/%s", tests[i].machine);
 290            qtest_add_data_func(name, &tests[i], test_machine);
 291            g_free(name);
 292        }
 293    }
 294
 295    return g_test_run();
 296}
 297