qemu/hw/block/trace-events
<<
>>
Prefs
   1# See docs/devel/tracing.rst for syntax documentation.
   2
   3# fdc.c
   4fdc_ioport_read(uint8_t reg, uint8_t value) "read reg 0x%02x val 0x%02x"
   5fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x"
   6
   7# fdc-sysbus.c
   8fdctrl_tc_pulse(int level) "TC pulse: %u"
   9
  10# pflash_cfi01.c
  11# pflash_cfi02.c
  12pflash_chip_erase_invalid(const char *name, uint64_t offset) "%s: chip erase: invalid address 0x%" PRIx64
  13pflash_chip_erase_start(const char *name) "%s: start chip erase"
  14pflash_data_read(const char *name, uint64_t offset, unsigned size, uint32_t value) "%s: data offset:0x%04"PRIx64" size:%u value:0x%04x"
  15pflash_data_write(const char *name, uint64_t offset, unsigned size, uint32_t value, uint64_t counter) "%s: data offset:0x%04"PRIx64" size:%u value:0x%04x counter:0x%016"PRIx64
  16pflash_device_id(const char *name, uint16_t id) "%s: read device ID: 0x%04x"
  17pflash_device_info(const char *name, uint64_t offset) "%s: read device information offset:0x%04" PRIx64
  18pflash_erase_complete(const char *name) "%s: sector erase complete"
  19pflash_erase_timeout(const char *name, int count) "%s: erase timeout fired; erasing %d sectors"
  20pflash_io_read(const char *name, uint64_t offset, unsigned int size, uint32_t value, uint8_t cmd, uint8_t wcycle) "%s: offset:0x%04" PRIx64 " size:%u value:0x%04x cmd:0x%02x wcycle:%u"
  21pflash_io_write(const char *name, uint64_t offset, unsigned int size, uint32_t value, uint8_t wcycle) "%s: offset:0x%04"PRIx64" size:%u value:0x%04x wcycle:%u"
  22pflash_manufacturer_id(const char *name, uint16_t id) "%s: read manufacturer ID: 0x%04x"
  23pflash_mode_read_array(const char *name) "%s: read array mode"
  24pflash_postload_cb(const char *name)  "%s: updating bdrv"
  25pflash_read_done(const char *name, uint64_t offset, uint64_t ret) "%s: ID:0x%" PRIx64 " ret:0x%" PRIx64
  26pflash_read_status(const char *name, uint32_t ret) "%s: status:0x%x"
  27pflash_read_unknown_state(const char *name, uint8_t cmd) "%s: unknown command state:0x%x"
  28pflash_reset(const char *name) "%s: reset"
  29pflash_sector_erase_start(const char *name, int width1, uint64_t start, int width2, uint64_t end) "%s: start sector erase at: 0x%0*" PRIx64 "-0x%0*" PRIx64
  30pflash_timer_expired(const char *name, uint8_t cmd) "%s: command 0x%02x done"
  31pflash_unlock0_failed(const char *name, uint64_t offset, uint8_t cmd, uint16_t addr0) "%s: unlock0 failed 0x%" PRIx64 " 0x%02x 0x%04x"
  32pflash_unlock1_failed(const char *name, uint64_t offset, uint8_t cmd) "%s: unlock0 failed 0x%" PRIx64 " 0x%02x"
  33pflash_unsupported_device_configuration(const char *name, uint8_t width, uint8_t max) "%s: unsupported device configuration: device_width:%d max_device_width:%d"
  34pflash_write(const char *name, const char *str) "%s: %s"
  35pflash_write_block(const char *name, uint32_t value) "%s: block write: bytes:0x%x"
  36pflash_write_block_erase(const char *name, uint64_t offset, uint64_t len) "%s: block erase offset:0x%" PRIx64 " bytes:0x%" PRIx64
  37pflash_write_failed(const char *name, uint64_t offset, uint8_t cmd) "%s: command failed 0x%" PRIx64 " 0x%02x"
  38pflash_write_invalid(const char *name, uint8_t cmd) "%s: invalid write for command 0x%02x"
  39pflash_write_invalid_command(const char *name, uint8_t cmd) "%s: invalid command 0x%02x (wc 5)"
  40pflash_write_invalid_state(const char *name, uint8_t cmd, int wc) "%s: invalid command state 0x%02x (wc %d)"
  41pflash_write_start(const char *name, uint8_t cmd) "%s: starting command 0x%02x"
  42pflash_write_unknown(const char *name, uint8_t cmd) "%s: unknown command 0x%02x"
  43
  44# virtio-blk.c
  45virtio_blk_req_complete(void *vdev, void *req, int status) "vdev %p req %p status %d"
  46virtio_blk_rw_complete(void *vdev, void *req, int ret) "vdev %p req %p ret %d"
  47virtio_blk_handle_write(void *vdev, void *req, uint64_t sector, size_t nsectors) "vdev %p req %p sector %"PRIu64" nsectors %zu"
  48virtio_blk_handle_read(void *vdev, void *req, uint64_t sector, size_t nsectors) "vdev %p req %p sector %"PRIu64" nsectors %zu"
  49virtio_blk_submit_multireq(void *vdev, void *mrb, int start, int num_reqs, uint64_t offset, size_t size, bool is_write) "vdev %p mrb %p start %d num_reqs %d offset %"PRIu64" size %zu is_write %d"
  50
  51# hd-geometry.c
  52hd_geometry_lchs_guess(void *blk, int cyls, int heads, int secs) "blk %p LCHS %d %d %d"
  53hd_geometry_guess(void *blk, uint32_t cyls, uint32_t heads, uint32_t secs, int trans) "blk %p CHS %u %u %u trans %d"
  54
  55# xen-block.c
  56xen_block_realize(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
  57xen_block_connect(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
  58xen_block_disconnect(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
  59xen_block_unrealize(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
  60xen_block_size(const char *type, uint32_t disk, uint32_t partition, int64_t sectors) "%s d%up%u %"PRIi64
  61xen_disk_realize(void) ""
  62xen_disk_unrealize(void) ""
  63xen_cdrom_realize(void) ""
  64xen_cdrom_unrealize(void) ""
  65xen_block_blockdev_add(char *str) "%s"
  66xen_block_blockdev_del(const char *node_name) "%s"
  67xen_block_device_create(unsigned int number) "%u"
  68xen_block_device_destroy(unsigned int number) "%u"
  69
  70# m25p80.c
  71m25p80_flash_erase(void *s, int offset, uint32_t len) "[%p] offset = 0x%"PRIx32", len = %u"
  72m25p80_programming_zero_to_one(void *s, uint32_t addr, uint8_t prev, uint8_t data) "[%p] programming zero to one! addr=0x%"PRIx32"  0x%"PRIx8" -> 0x%"PRIx8
  73m25p80_reset_done(void *s) "[%p] Reset done."
  74m25p80_command_decoded(void *s, uint32_t cmd) "[%p] new command:0x%"PRIx32
  75m25p80_complete_collecting(void *s, uint32_t cmd, int n, uint8_t ear, uint32_t cur_addr) "[%p] decode cmd: 0x%"PRIx32" len %d ear 0x%"PRIx8" addr 0x%"PRIx32
  76m25p80_populated_jedec(void *s) "[%p] populated jedec code"
  77m25p80_chip_erase(void *s) "[%p] chip erase"
  78m25p80_select(void *s, const char *what) "[%p] %sselect"
  79m25p80_page_program(void *s, uint32_t addr, uint8_t tx) "[%p] page program cur_addr=0x%"PRIx32" data=0x%"PRIx8
  80m25p80_transfer(void *s, uint8_t state, uint32_t len, uint8_t needed, uint32_t pos, uint32_t cur_addr, uint8_t t) "[%p] Transfer state 0x%"PRIx8" len 0x%"PRIx32" needed 0x%"PRIx8" pos 0x%"PRIx32" addr 0x%"PRIx32" tx 0x%"PRIx8
  81m25p80_read_byte(void *s, uint32_t addr, uint8_t v) "[%p] Read byte 0x%"PRIx32"=0x%"PRIx8
  82m25p80_read_data(void *s, uint32_t pos, uint8_t v) "[%p] Read data 0x%"PRIx32"=0x%"PRIx8
  83m25p80_binding(void *s) "[%p] Binding to IF_MTD drive"
  84m25p80_binding_no_bdrv(void *s) "[%p] No BDRV - binding to RAM"
  85