LXR qemu/hw/arm/exynos4210.c

   1/*
   2 *  Samsung exynos4210 SoC emulation
   3 *
   4 *  Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved.
   5 *    Maksim Kozlov <m.kozlov@samsung.com>
   6 *    Evgeny Voevodin <e.voevodin@samsung.com>
   7 *    Igor Mitsyanko  <i.mitsyanko@samsung.com>
   8 *
   9 *  This program is free software; you can redistribute it and/or modify it
  10 *  under the terms of the GNU General Public License as published by the
  11 *  Free Software Foundation; either version 2 of the License, or
  12 *  (at your option) any later version.
  13 *
  14 *  This program is distributed in the hope that it will be useful, but WITHOUT
  15 *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  16 *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
  17 *  for more details.
  18 *
  19 *  You should have received a copy of the GNU General Public License along
  20 *  with this program; if not, see <http://www.gnu.org/licenses/>.
  21 *
  22 */
  23
  24#include "qemu/osdep.h"
  25#include "qapi/error.h"
  26#include "cpu.h"
  27#include "hw/cpu/a9mpcore.h"
  28#include "hw/irq.h"
  29#include "sysemu/blockdev.h"
  30#include "sysemu/sysemu.h"
  31#include "hw/sysbus.h"
  32#include "hw/arm/boot.h"
  33#include "hw/loader.h"
  34#include "hw/qdev-properties.h"
  35#include "hw/arm/exynos4210.h"
  36#include "hw/sd/sdhci.h"
  37#include "hw/usb/hcd-ehci.h"
  38
  39#define EXYNOS4210_CHIPID_ADDR         0x10000000
  40
  41/* PWM */
  42#define EXYNOS4210_PWM_BASE_ADDR       0x139D0000
  43
  44/* RTC */
  45#define EXYNOS4210_RTC_BASE_ADDR       0x10070000
  46
  47/* MCT */
  48#define EXYNOS4210_MCT_BASE_ADDR       0x10050000
  49
  50/* I2C */
  51#define EXYNOS4210_I2C_SHIFT           0x00010000
  52#define EXYNOS4210_I2C_BASE_ADDR       0x13860000
  53/* Interrupt Group of External Interrupt Combiner for I2C */
  54#define EXYNOS4210_I2C_INTG            27
  55#define EXYNOS4210_HDMI_INTG           16
  56
  57/* UART's definitions */
  58#define EXYNOS4210_UART0_BASE_ADDR     0x13800000
  59#define EXYNOS4210_UART1_BASE_ADDR     0x13810000
  60#define EXYNOS4210_UART2_BASE_ADDR     0x13820000
  61#define EXYNOS4210_UART3_BASE_ADDR     0x13830000
  62#define EXYNOS4210_UART0_FIFO_SIZE     256
  63#define EXYNOS4210_UART1_FIFO_SIZE     64
  64#define EXYNOS4210_UART2_FIFO_SIZE     16
  65#define EXYNOS4210_UART3_FIFO_SIZE     16
  66/* Interrupt Group of External Interrupt Combiner for UART */
  67#define EXYNOS4210_UART_INT_GRP        26
  68
  69/* External GIC */
  70#define EXYNOS4210_EXT_GIC_CPU_BASE_ADDR    0x10480000
  71#define EXYNOS4210_EXT_GIC_DIST_BASE_ADDR   0x10490000
  72
  73/* Combiner */
  74#define EXYNOS4210_EXT_COMBINER_BASE_ADDR   0x10440000
  75#define EXYNOS4210_INT_COMBINER_BASE_ADDR   0x10448000
  76
  77/* SD/MMC host controllers */
  78#define EXYNOS4210_SDHCI_CAPABILITIES       0x05E80080
  79#define EXYNOS4210_SDHCI_BASE_ADDR          0x12510000
  80#define EXYNOS4210_SDHCI_ADDR(n)            (EXYNOS4210_SDHCI_BASE_ADDR + \
  81                                                0x00010000 * (n))
  82#define EXYNOS4210_SDHCI_NUMBER             4
  83
  84/* PMU SFR base address */
  85#define EXYNOS4210_PMU_BASE_ADDR            0x10020000
  86
  87/* Clock controller SFR base address */
  88#define EXYNOS4210_CLK_BASE_ADDR            0x10030000
  89
  90/* PRNG/HASH SFR base address */
  91#define EXYNOS4210_RNG_BASE_ADDR            0x10830400
  92
  93/* Display controllers (FIMD) */
  94#define EXYNOS4210_FIMD0_BASE_ADDR          0x11C00000
  95
  96/* EHCI */
  97#define EXYNOS4210_EHCI_BASE_ADDR           0x12580000
  98
  99/* DMA */
 100#define EXYNOS4210_PL330_BASE0_ADDR         0x12680000
 101#define EXYNOS4210_PL330_BASE1_ADDR         0x12690000
 102#define EXYNOS4210_PL330_BASE2_ADDR         0x12850000
 103
 104static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43,
 105                                    0x09, 0x00, 0x00, 0x00 };
 106
 107static uint64_t exynos4210_chipid_and_omr_read(void *opaque, hwaddr offset,
 108                                               unsigned size)
 109{
 110    assert(offset < sizeof(chipid_and_omr));
 111    return chipid_and_omr[offset];
 112}
 113
 114static void exynos4210_chipid_and_omr_write(void *opaque, hwaddr offset,
 115                                            uint64_t value, unsigned size)
 116{
 117    return;
 118}
 119
 120static const MemoryRegionOps exynos4210_chipid_and_omr_ops = {
 121    .read = exynos4210_chipid_and_omr_read,
 122    .write = exynos4210_chipid_and_omr_write,
 123    .endianness = DEVICE_NATIVE_ENDIAN,
 124    .impl = {
 125        .max_access_size = 1,
 126    }
 127};
 128
 129void exynos4210_write_secondary(ARMCPU *cpu,
 130        const struct arm_boot_info *info)
 131{
 132    int n;
 133    uint32_t smpboot[] = {
 134        0xe59f3034, /* ldr r3, External gic_cpu_if */
 135        0xe59f2034, /* ldr r2, Internal gic_cpu_if */
 136        0xe59f0034, /* ldr r0, startaddr */
 137        0xe3a01001, /* mov r1, #1 */
 138        0xe5821000, /* str r1, [r2] */
 139        0xe5831000, /* str r1, [r3] */
 140        0xe3a010ff, /* mov r1, #0xff */
 141        0xe5821004, /* str r1, [r2, #4] */
 142        0xe5831004, /* str r1, [r3, #4] */
 143        0xf57ff04f, /* dsb */
 144        0xe320f003, /* wfi */
 145        0xe5901000, /* ldr     r1, [r0] */
 146        0xe1110001, /* tst     r1, r1 */
 147        0x0afffffb, /* beq     <wfi> */
 148        0xe12fff11, /* bx      r1 */
 149        EXYNOS4210_EXT_GIC_CPU_BASE_ADDR,
 150        0,          /* gic_cpu_if: base address of Internal GIC CPU interface */
 151        0           /* bootreg: Boot register address is held here */
 152    };
 153    smpboot[ARRAY_SIZE(smpboot) - 1] = info->smp_bootreg_addr;
 154    smpboot[ARRAY_SIZE(smpboot) - 2] = info->gic_cpu_if_addr;
 155    for (n = 0; n < ARRAY_SIZE(smpboot); n++) {
 156        smpboot[n] = tswap32(smpboot[n]);
 157    }
 158    rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot),
 159                       info->smp_loader_start);
 160}
 161
 162static uint64_t exynos4210_calc_affinity(int cpu)
 163{
 164    /* Exynos4210 has 0x9 as cluster ID */
 165    return (0x9 << ARM_AFF1_SHIFT) | cpu;
 166}
 167
 168static DeviceState *pl330_create(uint32_t base, qemu_or_irq *orgate,
 169                                 qemu_irq irq, int nreq, int nevents, int width)
 170{
 171    SysBusDevice *busdev;
 172    DeviceState *dev;
 173    int i;
 174
 175    dev = qdev_new("pl330");
 176    object_property_set_link(OBJECT(dev), "memory",
 177                             OBJECT(get_system_memory()),
 178                             &error_fatal);
 179    qdev_prop_set_uint8(dev, "num_events", nevents);
 180    qdev_prop_set_uint8(dev, "num_chnls",  8);
 181    qdev_prop_set_uint8(dev, "num_periph_req",  nreq);
 182
 183    qdev_prop_set_uint8(dev, "wr_cap", 4);
 184    qdev_prop_set_uint8(dev, "wr_q_dep", 8);
 185    qdev_prop_set_uint8(dev, "rd_cap", 4);
 186    qdev_prop_set_uint8(dev, "rd_q_dep", 8);
 187    qdev_prop_set_uint8(dev, "data_width", width);
 188    qdev_prop_set_uint16(dev, "data_buffer_dep", width);
 189    busdev = SYS_BUS_DEVICE(dev);
 190    sysbus_realize_and_unref(busdev, &error_fatal);
 191    sysbus_mmio_map(busdev, 0, base);
 192
 193    object_property_set_int(OBJECT(orgate), "num-lines", nevents + 1,
 194                            &error_abort);
 195    qdev_realize(DEVICE(orgate), NULL, &error_abort);
 196
 197    for (i = 0; i < nevents + 1; i++) {
 198        sysbus_connect_irq(busdev, i, qdev_get_gpio_in(DEVICE(orgate), i));
 199    }
 200    qdev_connect_gpio_out(DEVICE(orgate), 0, irq);
 201    return dev;
 202}
 203
 204static void exynos4210_realize(DeviceState *socdev, Error **errp)
 205{
 206    Exynos4210State *s = EXYNOS4210_SOC(socdev);
 207    MemoryRegion *system_mem = get_system_memory();
 208    qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS];
 209    SysBusDevice *busdev;
 210    DeviceState *dev, *uart[4], *pl330[3];
 211    int i, n;
 212
 213    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
 214        Object *cpuobj = object_new(ARM_CPU_TYPE_NAME("cortex-a9"));
 215
 216        /* By default A9 CPUs have EL3 enabled.  This board does not currently
 217         * support EL3 so the CPU EL3 property is disabled before realization.
 218         */
 219        if (object_property_find(cpuobj, "has_el3")) {
 220            object_property_set_bool(cpuobj, "has_el3", false, &error_fatal);
 221        }
 222
 223        s->cpu[n] = ARM_CPU(cpuobj);
 224        object_property_set_int(cpuobj, "mp-affinity",
 225                                exynos4210_calc_affinity(n), &error_abort);
 226        object_property_set_int(cpuobj, "reset-cbar",
 227                                EXYNOS4210_SMP_PRIVATE_BASE_ADDR,
 228                                &error_abort);
 229        qdev_realize(DEVICE(cpuobj), NULL, &error_fatal);
 230    }
 231
 232    /*** IRQs ***/
 233
 234    s->irq_table = exynos4210_init_irq(&s->irqs);
 235
 236    /* IRQ Gate */
 237    for (i = 0; i < EXYNOS4210_NCPUS; i++) {
 238        dev = qdev_new("exynos4210.irq_gate");
 239        qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS);
 240        sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 241        /* Get IRQ Gate input in gate_irq */
 242        for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
 243            gate_irq[i][n] = qdev_get_gpio_in(dev, n);
 244        }
 245        busdev = SYS_BUS_DEVICE(dev);
 246
 247        /* Connect IRQ Gate output to CPU's IRQ line */
 248        sysbus_connect_irq(busdev, 0,
 249                           qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ));
 250    }
 251
 252    /* Private memory region and Internal GIC */
 253    dev = qdev_new(TYPE_A9MPCORE_PRIV);
 254    qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
 255    busdev = SYS_BUS_DEVICE(dev);
 256    sysbus_realize_and_unref(busdev, &error_fatal);
 257    sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR);
 258    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
 259        sysbus_connect_irq(busdev, n, gate_irq[n][0]);
 260    }
 261    for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) {
 262        s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n);
 263    }
 264
 265    /* Cache controller */
 266    sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL);
 267
 268    /* External GIC */
 269    dev = qdev_new("exynos4210.gic");
 270    qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
 271    busdev = SYS_BUS_DEVICE(dev);
 272    sysbus_realize_and_unref(busdev, &error_fatal);
 273    /* Map CPU interface */
 274    sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR);
 275    /* Map Distributer interface */
 276    sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR);
 277    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
 278        sysbus_connect_irq(busdev, n, gate_irq[n][1]);
 279    }
 280    for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) {
 281        s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n);
 282    }
 283
 284    /* Internal Interrupt Combiner */
 285    dev = qdev_new("exynos4210.combiner");
 286    busdev = SYS_BUS_DEVICE(dev);
 287    sysbus_realize_and_unref(busdev, &error_fatal);
 288    for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
 289        sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]);
 290    }
 291    exynos4210_combiner_get_gpioin(&s->irqs, dev, 0);
 292    sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR);
 293
 294    /* External Interrupt Combiner */
 295    dev = qdev_new("exynos4210.combiner");
 296    qdev_prop_set_uint32(dev, "external", 1);
 297    busdev = SYS_BUS_DEVICE(dev);
 298    sysbus_realize_and_unref(busdev, &error_fatal);
 299    for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
 300        sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]);
 301    }
 302    exynos4210_combiner_get_gpioin(&s->irqs, dev, 1);
 303    sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR);
 304
 305    /* Initialize board IRQs. */
 306    exynos4210_init_board_irqs(&s->irqs);
 307
 308    /*** Memory ***/
 309
 310    /* Chip-ID and OMR */
 311    memory_region_init_io(&s->chipid_mem, OBJECT(socdev),
 312                          &exynos4210_chipid_and_omr_ops, NULL,
 313                          "exynos4210.chipid", sizeof(chipid_and_omr));
 314    memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR,
 315                                &s->chipid_mem);
 316
 317    /* Internal ROM */
 318    memory_region_init_rom(&s->irom_mem, OBJECT(socdev), "exynos4210.irom",
 319                           EXYNOS4210_IROM_SIZE, &error_fatal);
 320    memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR,
 321                                &s->irom_mem);
 322    /* mirror of iROM */
 323    memory_region_init_alias(&s->irom_alias_mem, OBJECT(socdev),
 324                             "exynos4210.irom_alias", &s->irom_mem, 0,
 325                             EXYNOS4210_IROM_SIZE);
 326    memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR,
 327                                &s->irom_alias_mem);
 328
 329    /* Internal RAM */
 330    memory_region_init_ram(&s->iram_mem, NULL, "exynos4210.iram",
 331                           EXYNOS4210_IRAM_SIZE, &error_fatal);
 332    memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR,
 333                                &s->iram_mem);
 334
 335   /* PMU.
 336    * The only reason of existence at the moment is that secondary CPU boot
 337    * loader uses PMU INFORM5 register as a holding pen.
 338    */
 339    sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL);
 340
 341    sysbus_create_simple("exynos4210.clk", EXYNOS4210_CLK_BASE_ADDR, NULL);
 342    sysbus_create_simple("exynos4210.rng", EXYNOS4210_RNG_BASE_ADDR, NULL);
 343
 344    /* PWM */
 345    sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
 346                          s->irq_table[exynos4210_get_irq(22, 0)],
 347                          s->irq_table[exynos4210_get_irq(22, 1)],
 348                          s->irq_table[exynos4210_get_irq(22, 2)],
 349                          s->irq_table[exynos4210_get_irq(22, 3)],
 350                          s->irq_table[exynos4210_get_irq(22, 4)],
 351                          NULL);
 352    /* RTC */
 353    sysbus_create_varargs("exynos4210.rtc", EXYNOS4210_RTC_BASE_ADDR,
 354                          s->irq_table[exynos4210_get_irq(23, 0)],
 355                          s->irq_table[exynos4210_get_irq(23, 1)],
 356                          NULL);
 357
 358    /* Multi Core Timer */
 359    dev = qdev_new("exynos4210.mct");
 360    busdev = SYS_BUS_DEVICE(dev);
 361    sysbus_realize_and_unref(busdev, &error_fatal);
 362    for (n = 0; n < 4; n++) {
 363        /* Connect global timer interrupts to Combiner gpio_in */
 364        sysbus_connect_irq(busdev, n,
 365                s->irq_table[exynos4210_get_irq(1, 4 + n)]);
 366    }
 367    /* Connect local timer interrupts to Combiner gpio_in */
 368    sysbus_connect_irq(busdev, 4,
 369            s->irq_table[exynos4210_get_irq(51, 0)]);
 370    sysbus_connect_irq(busdev, 5,
 371            s->irq_table[exynos4210_get_irq(35, 3)]);
 372    sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR);
 373
 374    /*** I2C ***/
 375    for (n = 0; n < EXYNOS4210_I2C_NUMBER; n++) {
 376        uint32_t addr = EXYNOS4210_I2C_BASE_ADDR + EXYNOS4210_I2C_SHIFT * n;
 377        qemu_irq i2c_irq;
 378
 379        if (n < 8) {
 380            i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_I2C_INTG, n)];
 381        } else {
 382            i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_HDMI_INTG, 1)];
 383        }
 384
 385        dev = qdev_new("exynos4210.i2c");
 386        busdev = SYS_BUS_DEVICE(dev);
 387        sysbus_realize_and_unref(busdev, &error_fatal);
 388        sysbus_connect_irq(busdev, 0, i2c_irq);
 389        sysbus_mmio_map(busdev, 0, addr);
 390        s->i2c_if[n] = (I2CBus *)qdev_get_child_bus(dev, "i2c");
 391    }
 392
 393
 394    /*** UARTs ***/
 395    uart[0] = exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
 396                           EXYNOS4210_UART0_FIFO_SIZE, 0, serial_hd(0),
 397                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]);
 398
 399    uart[1] = exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR,
 400                           EXYNOS4210_UART1_FIFO_SIZE, 1, serial_hd(1),
 401                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]);
 402
 403    uart[2] = exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR,
 404                           EXYNOS4210_UART2_FIFO_SIZE, 2, serial_hd(2),
 405                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]);
 406
 407    uart[3] = exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR,
 408                           EXYNOS4210_UART3_FIFO_SIZE, 3, serial_hd(3),
 409                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);
 410
 411    /*** SD/MMC host controllers ***/
 412    for (n = 0; n < EXYNOS4210_SDHCI_NUMBER; n++) {
 413        DeviceState *carddev;
 414        BlockBackend *blk;
 415        DriveInfo *di;
 416
 417        /* Compatible with:
 418         * - SD Host Controller Specification Version 2.0
 419         * - SDIO Specification Version 2.0
 420         * - MMC Specification Version 4.3
 421         * - SDMA
 422         * - ADMA2
 423         *
 424         * As this part of the Exynos4210 is not publically available,
 425         * we used the "HS-MMC Controller S3C2416X RISC Microprocessor"
 426         * public datasheet which is very similar (implementing
 427         * MMC Specification Version 4.0 being the only difference noted)
 428         */
 429        dev = qdev_new(TYPE_S3C_SDHCI);
 430        qdev_prop_set_uint64(dev, "capareg", EXYNOS4210_SDHCI_CAPABILITIES);
 431
 432        busdev = SYS_BUS_DEVICE(dev);
 433        sysbus_realize_and_unref(busdev, &error_fatal);
 434        sysbus_mmio_map(busdev, 0, EXYNOS4210_SDHCI_ADDR(n));
 435        sysbus_connect_irq(busdev, 0, s->irq_table[exynos4210_get_irq(29, n)]);
 436
 437        di = drive_get(IF_SD, 0, n);
 438        blk = di ? blk_by_legacy_dinfo(di) : NULL;
 439        carddev = qdev_new(TYPE_SD_CARD);
 440        qdev_prop_set_drive(carddev, "drive", blk);
 441        qdev_realize_and_unref(carddev, qdev_get_child_bus(dev, "sd-bus"),
 442                               &error_fatal);
 443    }
 444
 445    /*** Display controller (FIMD) ***/
 446    sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR,
 447            s->irq_table[exynos4210_get_irq(11, 0)],
 448            s->irq_table[exynos4210_get_irq(11, 1)],
 449            s->irq_table[exynos4210_get_irq(11, 2)],
 450            NULL);
 451
 452    sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR,
 453            s->irq_table[exynos4210_get_irq(28, 3)]);
 454
 455    /*** DMA controllers ***/
 456    pl330[0] = pl330_create(EXYNOS4210_PL330_BASE0_ADDR,
 457                            &s->pl330_irq_orgate[0],
 458                            s->irq_table[exynos4210_get_irq(21, 0)],
 459                            32, 32, 32);
 460    pl330[1] = pl330_create(EXYNOS4210_PL330_BASE1_ADDR,
 461                            &s->pl330_irq_orgate[1],
 462                            s->irq_table[exynos4210_get_irq(21, 1)],
 463                            32, 32, 32);
 464    pl330[2] = pl330_create(EXYNOS4210_PL330_BASE2_ADDR,
 465                            &s->pl330_irq_orgate[2],
 466                            s->irq_table[exynos4210_get_irq(20, 1)],
 467                            1, 31, 64);
 468
 469    sysbus_connect_irq(SYS_BUS_DEVICE(uart[0]), 1,
 470                       qdev_get_gpio_in(pl330[0], 15));
 471    sysbus_connect_irq(SYS_BUS_DEVICE(uart[1]), 1,
 472                       qdev_get_gpio_in(pl330[1], 15));
 473    sysbus_connect_irq(SYS_BUS_DEVICE(uart[2]), 1,
 474                       qdev_get_gpio_in(pl330[0], 17));
 475    sysbus_connect_irq(SYS_BUS_DEVICE(uart[3]), 1,
 476                       qdev_get_gpio_in(pl330[1], 17));
 477}
 478
 479static void exynos4210_init(Object *obj)
 480{
 481    Exynos4210State *s = EXYNOS4210_SOC(obj);
 482    int i;
 483
 484    for (i = 0; i < ARRAY_SIZE(s->pl330_irq_orgate); i++) {
 485        char *name = g_strdup_printf("pl330-irq-orgate%d", i);
 486        qemu_or_irq *orgate = &s->pl330_irq_orgate[i];
 487
 488        object_initialize_child(obj, name, orgate, TYPE_OR_IRQ);
 489        g_free(name);
 490    }
 491}
 492
 493static void exynos4210_class_init(ObjectClass *klass, void *data)
 494{
 495    DeviceClass *dc = DEVICE_CLASS(klass);
 496
 497    dc->realize = exynos4210_realize;
 498}
 499
 500static const TypeInfo exynos4210_info = {
 501    .name = TYPE_EXYNOS4210_SOC,
 502    .parent = TYPE_SYS_BUS_DEVICE,
 503    .instance_size = sizeof(Exynos4210State),
 504    .instance_init = exynos4210_init,
 505    .class_init = exynos4210_class_init,
 506};
 507
 508static void exynos4210_register_types(void)
 509{
 510    type_register_static(&exynos4210_info);
 511}
 512
 513type_init(exynos4210_register_types)
 514