LXR qemu/hw/misc/exynos4210

   1/*
   2 *  Exynos4210 Power Management Unit (PMU) Emulation
   3 *
   4 *  Copyright (C) 2011 Samsung Electronics Co Ltd.
   5 *    Maksim Kozlov <m.kozlov@samsung.com>
   6 *
   7 *  This program is free software; you can redistribute it and/or modify it
   8 *  under the terms of the GNU General Public License as published by the
   9 *  Free Software Foundation; either version 2 of the License, or
  10 *  (at your option) any later version.
  11 *
  12 *  This program is distributed in the hope that it will be useful, but WITHOUT
  13 *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
  15 *  for more details.
  16 *
  17 *  You should have received a copy of the GNU General Public License along
  18 *  with this program; if not, see <http://www.gnu.org/licenses/>.
  19 */
  20
  21/*
  22 * This model implements PMU registers just as a bulk of memory. Currently,
  23 * the only reason this device exists is that secondary CPU boot loader
  24 * uses PMU INFORM5 register as a holding pen.
  25 */
  26
  27#include "qemu/osdep.h"
  28#include "hw/sysbus.h"
  29#include "migration/vmstate.h"
  30#include "qemu/module.h"
  31#include "sysemu/runstate.h"
  32#include "qom/object.h"
  33
  34#ifndef DEBUG_PMU
  35#define DEBUG_PMU           0
  36#endif
  37
  38#ifndef DEBUG_PMU_EXTEND
  39#define DEBUG_PMU_EXTEND    0
  40#endif
  41
  42#if DEBUG_PMU
  43#define  PRINT_DEBUG(fmt, args...)  \
  44        do { \
  45            fprintf(stderr, "  [%s:%d]   "fmt, __func__, __LINE__, ##args); \
  46        } while (0)
  47
  48#if DEBUG_PMU_EXTEND
  49#define  PRINT_DEBUG_EXTEND(fmt, args...) \
  50        do { \
  51            fprintf(stderr, "  [%s:%d]   "fmt, __func__, __LINE__, ##args); \
  52        } while (0)
  53#else
  54#define  PRINT_DEBUG_EXTEND(fmt, args...)  do {} while (0)
  55#endif /* EXTEND */
  56
  57#else
  58#define  PRINT_DEBUG(fmt, args...)   do {} while (0)
  59#define  PRINT_DEBUG_EXTEND(fmt, args...)  do {} while (0)
  60#endif
  61
  62/*
  63 *  Offsets for PMU registers
  64 */
  65#define OM_STAT                  0x0000 /* OM status register */
  66#define RTC_CLKO_SEL             0x000C /* Controls RTCCLKOUT */
  67#define GNSS_RTC_OUT_CTRL        0x0010 /* Controls GNSS_RTC_OUT */
  68/* Decides whether system-level low-power mode is used. */
  69#define SYSTEM_POWER_DOWN_CTRL   0x0200
  70/* Sets control options for CENTRAL_SEQ */
  71#define SYSTEM_POWER_DOWN_OPTION 0x0208
  72#define SWRESET                  0x0400 /* Generate software reset */
  73#define RST_STAT                 0x0404 /* Reset status register */
  74#define WAKEUP_STAT              0x0600 /* Wakeup status register  */
  75#define EINT_WAKEUP_MASK         0x0604 /* Configure External INTerrupt mask */
  76#define WAKEUP_MASK              0x0608 /* Configure wakeup source mask */
  77#define HDMI_PHY_CONTROL         0x0700 /* HDMI PHY control register */
  78#define USBDEVICE_PHY_CONTROL    0x0704 /* USB Device PHY control register */
  79#define USBHOST_PHY_CONTROL      0x0708 /* USB HOST PHY control register */
  80#define DAC_PHY_CONTROL          0x070C /* DAC control register  */
  81#define MIPI_PHY0_CONTROL        0x0710 /* MIPI PHY control register */
  82#define MIPI_PHY1_CONTROL        0x0714 /* MIPI PHY control register */
  83#define ADC_PHY_CONTROL          0x0718 /* TS-ADC control register */
  84#define PCIe_PHY_CONTROL         0x071C /* TS-PCIe control register */
  85#define SATA_PHY_CONTROL         0x0720 /* TS-SATA control register */
  86#define INFORM0                  0x0800 /* Information register 0  */
  87#define INFORM1                  0x0804 /* Information register 1  */
  88#define INFORM2                  0x0808 /* Information register 2  */
  89#define INFORM3                  0x080C /* Information register 3  */
  90#define INFORM4                  0x0810 /* Information register 4  */
  91#define INFORM5                  0x0814 /* Information register 5  */
  92#define INFORM6                  0x0818 /* Information register 6  */
  93#define INFORM7                  0x081C /* Information register 7  */
  94#define PMU_DEBUG                0x0A00 /* PMU debug register */
  95/* Registers to set system-level low-power option */
  96#define ARM_CORE0_SYS_PWR_REG              0x1000
  97#define ARM_CORE1_SYS_PWR_REG              0x1010
  98#define ARM_COMMON_SYS_PWR_REG             0x1080
  99#define ARM_CPU_L2_0_SYS_PWR_REG           0x10C0
 100#define ARM_CPU_L2_1_SYS_PWR_REG           0x10C4
 101#define CMU_ACLKSTOP_SYS_PWR_REG           0x1100
 102#define CMU_SCLKSTOP_SYS_PWR_REG           0x1104
 103#define CMU_RESET_SYS_PWR_REG              0x110C
 104#define APLL_SYSCLK_SYS_PWR_REG            0x1120
 105#define MPLL_SYSCLK_SYS_PWR_REG            0x1124
 106#define VPLL_SYSCLK_SYS_PWR_REG            0x1128
 107#define EPLL_SYSCLK_SYS_PWR_REG            0x112C
 108#define CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG  0x1138
 109#define CMU_RESET_GPS_ALIVE_SYS_PWR_REG    0x113C
 110#define CMU_CLKSTOP_CAM_SYS_PWR_REG        0x1140
 111#define CMU_CLKSTOP_TV_SYS_PWR_REG         0x1144
 112#define CMU_CLKSTOP_MFC_SYS_PWR_REG        0x1148
 113#define CMU_CLKSTOP_G3D_SYS_PWR_REG        0x114C
 114#define CMU_CLKSTOP_LCD0_SYS_PWR_REG       0x1150
 115#define CMU_CLKSTOP_LCD1_SYS_PWR_REG       0x1154
 116#define CMU_CLKSTOP_MAUDIO_SYS_PWR_REG     0x1158
 117#define CMU_CLKSTOP_GPS_SYS_PWR_REG        0x115C
 118#define CMU_RESET_CAM_SYS_PWR_REG          0x1160
 119#define CMU_RESET_TV_SYS_PWR_REG           0x1164
 120#define CMU_RESET_MFC_SYS_PWR_REG          0x1168
 121#define CMU_RESET_G3D_SYS_PWR_REG          0x116C
 122#define CMU_RESET_LCD0_SYS_PWR_REG         0x1170
 123#define CMU_RESET_LCD1_SYS_PWR_REG         0x1174
 124#define CMU_RESET_MAUDIO_SYS_PWR_REG       0x1178
 125#define CMU_RESET_GPS_SYS_PWR_REG          0x117C
 126#define TOP_BUS_SYS_PWR_REG                0x1180
 127#define TOP_RETENTION_SYS_PWR_REG          0x1184
 128#define TOP_PWR_SYS_PWR_REG                0x1188
 129#define LOGIC_RESET_SYS_PWR_REG            0x11A0
 130#define OneNANDXL_MEM_SYS_PWR_REG          0x11C0
 131#define MODEMIF_MEM_SYS_PWR_REG            0x11C4
 132#define USBDEVICE_MEM_SYS_PWR_REG          0x11CC
 133#define SDMMC_MEM_SYS_PWR_REG              0x11D0
 134#define CSSYS_MEM_SYS_PWR_REG              0x11D4
 135#define SECSS_MEM_SYS_PWR_REG              0x11D8
 136#define PCIe_MEM_SYS_PWR_REG               0x11E0
 137#define SATA_MEM_SYS_PWR_REG               0x11E4
 138#define PAD_RETENTION_DRAM_SYS_PWR_REG     0x1200
 139#define PAD_RETENTION_MAUDIO_SYS_PWR_REG   0x1204
 140#define PAD_RETENTION_GPIO_SYS_PWR_REG     0x1220
 141#define PAD_RETENTION_UART_SYS_PWR_REG     0x1224
 142#define PAD_RETENTION_MMCA_SYS_PWR_REG     0x1228
 143#define PAD_RETENTION_MMCB_SYS_PWR_REG     0x122C
 144#define PAD_RETENTION_EBIA_SYS_PWR_REG     0x1230
 145#define PAD_RETENTION_EBIB_SYS_PWR_REG     0x1234
 146#define PAD_ISOLATION_SYS_PWR_REG          0x1240
 147#define PAD_ALV_SEL_SYS_PWR_REG            0x1260
 148#define XUSBXTI_SYS_PWR_REG                0x1280
 149#define XXTI_SYS_PWR_REG                   0x1284
 150#define EXT_REGULATOR_SYS_PWR_REG          0x12C0
 151#define GPIO_MODE_SYS_PWR_REG              0x1300
 152#define GPIO_MODE_MAUDIO_SYS_PWR_REG       0x1340
 153#define CAM_SYS_PWR_REG                    0x1380
 154#define TV_SYS_PWR_REG                     0x1384
 155#define MFC_SYS_PWR_REG                    0x1388
 156#define G3D_SYS_PWR_REG                    0x138C
 157#define LCD0_SYS_PWR_REG                   0x1390
 158#define LCD1_SYS_PWR_REG                   0x1394
 159#define MAUDIO_SYS_PWR_REG                 0x1398
 160#define GPS_SYS_PWR_REG                    0x139C
 161#define GPS_ALIVE_SYS_PWR_REG              0x13A0
 162#define ARM_CORE0_CONFIGURATION 0x2000 /* Configure power mode of ARM_CORE0 */
 163#define ARM_CORE0_STATUS        0x2004 /* Check power mode of ARM_CORE0 */
 164#define ARM_CORE0_OPTION        0x2008 /* Sets control options for ARM_CORE0 */
 165#define ARM_CORE1_CONFIGURATION 0x2080 /* Configure power mode of ARM_CORE1 */
 166#define ARM_CORE1_STATUS        0x2084 /* Check power mode of ARM_CORE1 */
 167#define ARM_CORE1_OPTION        0x2088 /* Sets control options for ARM_CORE0 */
 168#define ARM_COMMON_OPTION       0x2408 /* Sets control options for ARM_COMMON */
 169/* Configure power mode of ARM_CPU_L2_0 */
 170#define ARM_CPU_L2_0_CONFIGURATION 0x2600
 171#define ARM_CPU_L2_0_STATUS        0x2604 /* Check power mode of ARM_CPU_L2_0 */
 172/* Configure power mode of ARM_CPU_L2_1 */
 173#define ARM_CPU_L2_1_CONFIGURATION 0x2620
 174#define ARM_CPU_L2_1_STATUS        0x2624 /* Check power mode of ARM_CPU_L2_1 */
 175/* Sets control options for PAD_RETENTION_MAUDIO */
 176#define PAD_RETENTION_MAUDIO_OPTION 0x3028
 177/* Sets control options for PAD_RETENTION_GPIO */
 178#define PAD_RETENTION_GPIO_OPTION   0x3108
 179/* Sets control options for PAD_RETENTION_UART */
 180#define PAD_RETENTION_UART_OPTION   0x3128
 181/* Sets control options for PAD_RETENTION_MMCA */
 182#define PAD_RETENTION_MMCA_OPTION   0x3148
 183/* Sets control options for PAD_RETENTION_MMCB */
 184#define PAD_RETENTION_MMCB_OPTION   0x3168
 185/* Sets control options for PAD_RETENTION_EBIA */
 186#define PAD_RETENTION_EBIA_OPTION   0x3188
 187/* Sets control options for PAD_RETENTION_EBIB */
 188#define PAD_RETENTION_EBIB_OPTION   0x31A8
 189#define PS_HOLD_CONTROL         0x330C /* PS_HOLD control register */
 190#define XUSBXTI_CONFIGURATION   0x3400 /* Configure the pad of XUSBXTI */
 191#define XUSBXTI_STATUS          0x3404 /* Check the pad of XUSBXTI */
 192/* Sets time required for XUSBXTI to be stabilized */
 193#define XUSBXTI_DURATION        0x341C
 194#define XXTI_CONFIGURATION      0x3420 /* Configure the pad of XXTI */
 195#define XXTI_STATUS             0x3424 /* Check the pad of XXTI */
 196/* Sets time required for XXTI to be stabilized */
 197#define XXTI_DURATION           0x343C
 198/* Sets time required for EXT_REGULATOR to be stabilized */
 199#define EXT_REGULATOR_DURATION  0x361C
 200#define CAM_CONFIGURATION       0x3C00 /* Configure power mode of CAM */
 201#define CAM_STATUS              0x3C04 /* Check power mode of CAM */
 202#define CAM_OPTION              0x3C08 /* Sets control options for CAM */
 203#define TV_CONFIGURATION        0x3C20 /* Configure power mode of TV */
 204#define TV_STATUS               0x3C24 /* Check power mode of TV */
 205#define TV_OPTION               0x3C28 /* Sets control options for TV */
 206#define MFC_CONFIGURATION       0x3C40 /* Configure power mode of MFC */
 207#define MFC_STATUS              0x3C44 /* Check power mode of MFC */
 208#define MFC_OPTION              0x3C48 /* Sets control options for MFC */
 209#define G3D_CONFIGURATION       0x3C60 /* Configure power mode of G3D */
 210#define G3D_STATUS              0x3C64 /* Check power mode of G3D */
 211#define G3D_OPTION              0x3C68 /* Sets control options for G3D */
 212#define LCD0_CONFIGURATION      0x3C80 /* Configure power mode of LCD0 */
 213#define LCD0_STATUS             0x3C84 /* Check power mode of LCD0 */
 214#define LCD0_OPTION             0x3C88 /* Sets control options for LCD0 */
 215#define LCD1_CONFIGURATION      0x3CA0 /* Configure power mode of LCD1 */
 216#define LCD1_STATUS             0x3CA4 /* Check power mode of LCD1 */
 217#define LCD1_OPTION             0x3CA8 /* Sets control options for LCD1 */
 218#define GPS_CONFIGURATION       0x3CE0 /* Configure power mode of GPS */
 219#define GPS_STATUS              0x3CE4 /* Check power mode of GPS */
 220#define GPS_OPTION              0x3CE8 /* Sets control options for GPS */
 221#define GPS_ALIVE_CONFIGURATION 0x3D00 /* Configure power mode of GPS */
 222#define GPS_ALIVE_STATUS        0x3D04 /* Check power mode of GPS */
 223#define GPS_ALIVE_OPTION        0x3D08 /* Sets control options for GPS */
 224
 225#define EXYNOS4210_PMU_REGS_MEM_SIZE 0x3d0c
 226
 227typedef struct Exynos4210PmuReg {
 228    const char  *name; /* for debug only */
 229    uint32_t     offset;
 230    uint32_t     reset_value;
 231} Exynos4210PmuReg;
 232
 233static const Exynos4210PmuReg exynos4210_pmu_regs[] = {
 234    {"OM_STAT", OM_STAT, 0x00000000},
 235    {"RTC_CLKO_SEL", RTC_CLKO_SEL, 0x00000000},
 236    {"GNSS_RTC_OUT_CTRL", GNSS_RTC_OUT_CTRL, 0x00000001},
 237    {"SYSTEM_POWER_DOWN_CTRL", SYSTEM_POWER_DOWN_CTRL, 0x00010000},
 238    {"SYSTEM_POWER_DOWN_OPTION", SYSTEM_POWER_DOWN_OPTION, 0x03030000},
 239    {"SWRESET", SWRESET, 0x00000000},
 240    {"RST_STAT", RST_STAT, 0x00000000},
 241    {"WAKEUP_STAT", WAKEUP_STAT, 0x00000000},
 242    {"EINT_WAKEUP_MASK", EINT_WAKEUP_MASK, 0x00000000},
 243    {"WAKEUP_MASK", WAKEUP_MASK, 0x00000000},
 244    {"HDMI_PHY_CONTROL", HDMI_PHY_CONTROL, 0x00960000},
 245    {"USBDEVICE_PHY_CONTROL", USBDEVICE_PHY_CONTROL, 0x00000000},
 246    {"USBHOST_PHY_CONTROL", USBHOST_PHY_CONTROL, 0x00000000},
 247    {"DAC_PHY_CONTROL", DAC_PHY_CONTROL, 0x00000000},
 248    {"MIPI_PHY0_CONTROL", MIPI_PHY0_CONTROL, 0x00000000},
 249    {"MIPI_PHY1_CONTROL", MIPI_PHY1_CONTROL, 0x00000000},
 250    {"ADC_PHY_CONTROL", ADC_PHY_CONTROL, 0x00000001},
 251    {"PCIe_PHY_CONTROL", PCIe_PHY_CONTROL, 0x00000000},
 252    {"SATA_PHY_CONTROL", SATA_PHY_CONTROL, 0x00000000},
 253    {"INFORM0", INFORM0, 0x00000000},
 254    {"INFORM1", INFORM1, 0x00000000},
 255    {"INFORM2", INFORM2, 0x00000000},
 256    {"INFORM3", INFORM3, 0x00000000},
 257    {"INFORM4", INFORM4, 0x00000000},
 258    {"INFORM5", INFORM5, 0x00000000},
 259    {"INFORM6", INFORM6, 0x00000000},
 260    {"INFORM7", INFORM7, 0x00000000},
 261    {"PMU_DEBUG", PMU_DEBUG, 0x00000000},
 262    {"ARM_CORE0_SYS_PWR_REG", ARM_CORE0_SYS_PWR_REG, 0xFFFFFFFF},
 263    {"ARM_CORE1_SYS_PWR_REG", ARM_CORE1_SYS_PWR_REG, 0xFFFFFFFF},
 264    {"ARM_COMMON_SYS_PWR_REG", ARM_COMMON_SYS_PWR_REG, 0xFFFFFFFF},
 265    {"ARM_CPU_L2_0_SYS_PWR_REG", ARM_CPU_L2_0_SYS_PWR_REG, 0xFFFFFFFF},
 266    {"ARM_CPU_L2_1_SYS_PWR_REG", ARM_CPU_L2_1_SYS_PWR_REG, 0xFFFFFFFF},
 267    {"CMU_ACLKSTOP_SYS_PWR_REG", CMU_ACLKSTOP_SYS_PWR_REG, 0xFFFFFFFF},
 268    {"CMU_SCLKSTOP_SYS_PWR_REG", CMU_SCLKSTOP_SYS_PWR_REG, 0xFFFFFFFF},
 269    {"CMU_RESET_SYS_PWR_REG", CMU_RESET_SYS_PWR_REG, 0xFFFFFFFF},
 270    {"APLL_SYSCLK_SYS_PWR_REG", APLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
 271    {"MPLL_SYSCLK_SYS_PWR_REG", MPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
 272    {"VPLL_SYSCLK_SYS_PWR_REG", VPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
 273    {"EPLL_SYSCLK_SYS_PWR_REG", EPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
 274    {"CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG", CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG,
 275            0xFFFFFFFF},
 276    {"CMU_RESET_GPS_ALIVE_SYS_PWR_REG", CMU_RESET_GPS_ALIVE_SYS_PWR_REG,
 277            0xFFFFFFFF},
 278    {"CMU_CLKSTOP_CAM_SYS_PWR_REG", CMU_CLKSTOP_CAM_SYS_PWR_REG, 0xFFFFFFFF},
 279    {"CMU_CLKSTOP_TV_SYS_PWR_REG", CMU_CLKSTOP_TV_SYS_PWR_REG, 0xFFFFFFFF},
 280    {"CMU_CLKSTOP_MFC_SYS_PWR_REG", CMU_CLKSTOP_MFC_SYS_PWR_REG, 0xFFFFFFFF},
 281    {"CMU_CLKSTOP_G3D_SYS_PWR_REG", CMU_CLKSTOP_G3D_SYS_PWR_REG, 0xFFFFFFFF},
 282    {"CMU_CLKSTOP_LCD0_SYS_PWR_REG", CMU_CLKSTOP_LCD0_SYS_PWR_REG, 0xFFFFFFFF},
 283    {"CMU_CLKSTOP_LCD1_SYS_PWR_REG", CMU_CLKSTOP_LCD1_SYS_PWR_REG, 0xFFFFFFFF},
 284    {"CMU_CLKSTOP_MAUDIO_SYS_PWR_REG", CMU_CLKSTOP_MAUDIO_SYS_PWR_REG,
 285            0xFFFFFFFF},
 286    {"CMU_CLKSTOP_GPS_SYS_PWR_REG", CMU_CLKSTOP_GPS_SYS_PWR_REG, 0xFFFFFFFF},
 287    {"CMU_RESET_CAM_SYS_PWR_REG", CMU_RESET_CAM_SYS_PWR_REG, 0xFFFFFFFF},
 288    {"CMU_RESET_TV_SYS_PWR_REG", CMU_RESET_TV_SYS_PWR_REG, 0xFFFFFFFF},
 289    {"CMU_RESET_MFC_SYS_PWR_REG", CMU_RESET_MFC_SYS_PWR_REG, 0xFFFFFFFF},
 290    {"CMU_RESET_G3D_SYS_PWR_REG", CMU_RESET_G3D_SYS_PWR_REG, 0xFFFFFFFF},
 291    {"CMU_RESET_LCD0_SYS_PWR_REG", CMU_RESET_LCD0_SYS_PWR_REG, 0xFFFFFFFF},
 292    {"CMU_RESET_LCD1_SYS_PWR_REG", CMU_RESET_LCD1_SYS_PWR_REG, 0xFFFFFFFF},
 293    {"CMU_RESET_MAUDIO_SYS_PWR_REG", CMU_RESET_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
 294    {"CMU_RESET_GPS_SYS_PWR_REG", CMU_RESET_GPS_SYS_PWR_REG, 0xFFFFFFFF},
 295    {"TOP_BUS_SYS_PWR_REG", TOP_BUS_SYS_PWR_REG, 0xFFFFFFFF},
 296    {"TOP_RETENTION_SYS_PWR_REG", TOP_RETENTION_SYS_PWR_REG, 0xFFFFFFFF},
 297    {"TOP_PWR_SYS_PWR_REG", TOP_PWR_SYS_PWR_REG, 0xFFFFFFFF},
 298    {"LOGIC_RESET_SYS_PWR_REG", LOGIC_RESET_SYS_PWR_REG, 0xFFFFFFFF},
 299    {"OneNANDXL_MEM_SYS_PWR_REG", OneNANDXL_MEM_SYS_PWR_REG, 0xFFFFFFFF},
 300    {"MODEMIF_MEM_SYS_PWR_REG", MODEMIF_MEM_SYS_PWR_REG, 0xFFFFFFFF},
 301    {"USBDEVICE_MEM_SYS_PWR_REG", USBDEVICE_MEM_SYS_PWR_REG, 0xFFFFFFFF},
 302    {"SDMMC_MEM_SYS_PWR_REG", SDMMC_MEM_SYS_PWR_REG, 0xFFFFFFFF},
 303    {"CSSYS_MEM_SYS_PWR_REG", CSSYS_MEM_SYS_PWR_REG, 0xFFFFFFFF},
 304    {"SECSS_MEM_SYS_PWR_REG", SECSS_MEM_SYS_PWR_REG, 0xFFFFFFFF},
 305    {"PCIe_MEM_SYS_PWR_REG", PCIe_MEM_SYS_PWR_REG, 0xFFFFFFFF},
 306    {"SATA_MEM_SYS_PWR_REG", SATA_MEM_SYS_PWR_REG, 0xFFFFFFFF},
 307    {"PAD_RETENTION_DRAM_SYS_PWR_REG", PAD_RETENTION_DRAM_SYS_PWR_REG,
 308            0xFFFFFFFF},
 309    {"PAD_RETENTION_MAUDIO_SYS_PWR_REG", PAD_RETENTION_MAUDIO_SYS_PWR_REG,
 310            0xFFFFFFFF},
 311    {"PAD_RETENTION_GPIO_SYS_PWR_REG", PAD_RETENTION_GPIO_SYS_PWR_REG,
 312            0xFFFFFFFF},
 313    {"PAD_RETENTION_UART_SYS_PWR_REG", PAD_RETENTION_UART_SYS_PWR_REG,
 314            0xFFFFFFFF},
 315    {"PAD_RETENTION_MMCA_SYS_PWR_REG", PAD_RETENTION_MMCA_SYS_PWR_REG,
 316            0xFFFFFFFF},
 317    {"PAD_RETENTION_MMCB_SYS_PWR_REG", PAD_RETENTION_MMCB_SYS_PWR_REG,
 318            0xFFFFFFFF},
 319    {"PAD_RETENTION_EBIA_SYS_PWR_REG", PAD_RETENTION_EBIA_SYS_PWR_REG,
 320            0xFFFFFFFF},
 321    {"PAD_RETENTION_EBIB_SYS_PWR_REG", PAD_RETENTION_EBIB_SYS_PWR_REG,
 322            0xFFFFFFFF},
 323    {"PAD_ISOLATION_SYS_PWR_REG", PAD_ISOLATION_SYS_PWR_REG, 0xFFFFFFFF},
 324    {"PAD_ALV_SEL_SYS_PWR_REG", PAD_ALV_SEL_SYS_PWR_REG, 0xFFFFFFFF},
 325    {"XUSBXTI_SYS_PWR_REG", XUSBXTI_SYS_PWR_REG, 0xFFFFFFFF},
 326    {"XXTI_SYS_PWR_REG", XXTI_SYS_PWR_REG, 0xFFFFFFFF},
 327    {"EXT_REGULATOR_SYS_PWR_REG", EXT_REGULATOR_SYS_PWR_REG, 0xFFFFFFFF},
 328    {"GPIO_MODE_SYS_PWR_REG", GPIO_MODE_SYS_PWR_REG, 0xFFFFFFFF},
 329    {"GPIO_MODE_MAUDIO_SYS_PWR_REG", GPIO_MODE_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
 330    {"CAM_SYS_PWR_REG", CAM_SYS_PWR_REG, 0xFFFFFFFF},
 331    {"TV_SYS_PWR_REG", TV_SYS_PWR_REG, 0xFFFFFFFF},
 332    {"MFC_SYS_PWR_REG", MFC_SYS_PWR_REG, 0xFFFFFFFF},
 333    {"G3D_SYS_PWR_REG", G3D_SYS_PWR_REG, 0xFFFFFFFF},
 334    {"LCD0_SYS_PWR_REG", LCD0_SYS_PWR_REG, 0xFFFFFFFF},
 335    {"LCD1_SYS_PWR_REG", LCD1_SYS_PWR_REG, 0xFFFFFFFF},
 336    {"MAUDIO_SYS_PWR_REG", MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
 337    {"GPS_SYS_PWR_REG", GPS_SYS_PWR_REG, 0xFFFFFFFF},
 338    {"GPS_ALIVE_SYS_PWR_REG", GPS_ALIVE_SYS_PWR_REG, 0xFFFFFFFF},
 339    {"ARM_CORE0_CONFIGURATION", ARM_CORE0_CONFIGURATION, 0x00000003},
 340    {"ARM_CORE0_STATUS", ARM_CORE0_STATUS, 0x00030003},
 341    {"ARM_CORE0_OPTION", ARM_CORE0_OPTION, 0x01010001},
 342    {"ARM_CORE1_CONFIGURATION", ARM_CORE1_CONFIGURATION, 0x00000003},
 343    {"ARM_CORE1_STATUS", ARM_CORE1_STATUS, 0x00030003},
 344    {"ARM_CORE1_OPTION", ARM_CORE1_OPTION, 0x01010001},
 345    {"ARM_COMMON_OPTION", ARM_COMMON_OPTION, 0x00000001},
 346    {"ARM_CPU_L2_0_CONFIGURATION", ARM_CPU_L2_0_CONFIGURATION, 0x00000003},
 347    {"ARM_CPU_L2_0_STATUS", ARM_CPU_L2_0_STATUS, 0x00000003},
 348    {"ARM_CPU_L2_1_CONFIGURATION", ARM_CPU_L2_1_CONFIGURATION, 0x00000003},
 349    {"ARM_CPU_L2_1_STATUS", ARM_CPU_L2_1_STATUS, 0x00000003},
 350    {"PAD_RETENTION_MAUDIO_OPTION", PAD_RETENTION_MAUDIO_OPTION, 0x00000000},
 351    {"PAD_RETENTION_GPIO_OPTION", PAD_RETENTION_GPIO_OPTION, 0x00000000},
 352    {"PAD_RETENTION_UART_OPTION", PAD_RETENTION_UART_OPTION, 0x00000000},
 353    {"PAD_RETENTION_MMCA_OPTION", PAD_RETENTION_MMCA_OPTION, 0x00000000},
 354    {"PAD_RETENTION_MMCB_OPTION", PAD_RETENTION_MMCB_OPTION, 0x00000000},
 355    {"PAD_RETENTION_EBIA_OPTION", PAD_RETENTION_EBIA_OPTION, 0x00000000},
 356    {"PAD_RETENTION_EBIB_OPTION", PAD_RETENTION_EBIB_OPTION, 0x00000000},
 357    /*
 358     * PS_HOLD_CONTROL: reset value and manually toggle high the DATA bit.
 359     * DATA bit high, set usually by bootloader, keeps system on.
 360     */
 361    {"PS_HOLD_CONTROL", PS_HOLD_CONTROL, 0x00005200 | BIT(8)},
 362    {"XUSBXTI_CONFIGURATION", XUSBXTI_CONFIGURATION, 0x00000001},
 363    {"XUSBXTI_STATUS", XUSBXTI_STATUS, 0x00000001},
 364    {"XUSBXTI_DURATION", XUSBXTI_DURATION, 0xFFF00000},
 365    {"XXTI_CONFIGURATION", XXTI_CONFIGURATION, 0x00000001},
 366    {"XXTI_STATUS", XXTI_STATUS, 0x00000001},
 367    {"XXTI_DURATION", XXTI_DURATION, 0xFFF00000},
 368    {"EXT_REGULATOR_DURATION", EXT_REGULATOR_DURATION, 0xFFF03FFF},
 369    {"CAM_CONFIGURATION", CAM_CONFIGURATION, 0x00000007},
 370    {"CAM_STATUS", CAM_STATUS, 0x00060007},
 371    {"CAM_OPTION", CAM_OPTION, 0x00000001},
 372    {"TV_CONFIGURATION", TV_CONFIGURATION, 0x00000007},
 373    {"TV_STATUS", TV_STATUS, 0x00060007},
 374    {"TV_OPTION", TV_OPTION, 0x00000001},
 375    {"MFC_CONFIGURATION", MFC_CONFIGURATION, 0x00000007},
 376    {"MFC_STATUS", MFC_STATUS, 0x00060007},
 377    {"MFC_OPTION", MFC_OPTION, 0x00000001},
 378    {"G3D_CONFIGURATION", G3D_CONFIGURATION, 0x00000007},
 379    {"G3D_STATUS", G3D_STATUS, 0x00060007},
 380    {"G3D_OPTION", G3D_OPTION, 0x00000001},
 381    {"LCD0_CONFIGURATION", LCD0_CONFIGURATION, 0x00000007},
 382    {"LCD0_STATUS", LCD0_STATUS, 0x00060007},
 383    {"LCD0_OPTION", LCD0_OPTION, 0x00000001},
 384    {"LCD1_CONFIGURATION", LCD1_CONFIGURATION, 0x00000007},
 385    {"LCD1_STATUS", LCD1_STATUS, 0x00060007},
 386    {"LCD1_OPTION", LCD1_OPTION, 0x00000001},
 387    {"GPS_CONFIGURATION", GPS_CONFIGURATION, 0x00000007},
 388    {"GPS_STATUS", GPS_STATUS, 0x00060007},
 389    {"GPS_OPTION", GPS_OPTION, 0x00000001},
 390    {"GPS_ALIVE_CONFIGURATION", GPS_ALIVE_CONFIGURATION, 0x00000007},
 391    {"GPS_ALIVE_STATUS", GPS_ALIVE_STATUS, 0x00060007},
 392    {"GPS_ALIVE_OPTION", GPS_ALIVE_OPTION, 0x00000001},
 393};
 394
 395#define PMU_NUM_OF_REGISTERS ARRAY_SIZE(exynos4210_pmu_regs)
 396
 397#define TYPE_EXYNOS4210_PMU "exynos4210.pmu"
 398OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210PmuState, EXYNOS4210_PMU)
 399
 400struct Exynos4210PmuState {
 401    SysBusDevice parent_obj;
 402
 403    MemoryRegion iomem;
 404    uint32_t reg[PMU_NUM_OF_REGISTERS];
 405};
 406
 407static void exynos4210_pmu_poweroff(void)
 408{
 409    PRINT_DEBUG("QEMU PMU: PS_HOLD bit down, powering off\n");
 410    qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
 411}
 412
 413static uint64_t exynos4210_pmu_read(void *opaque, hwaddr offset,
 414                                    unsigned size)
 415{
 416    Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
 417    const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs;
 418    unsigned int i;
 419
 420    for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
 421        if (reg_p->offset == offset) {
 422            PRINT_DEBUG_EXTEND("%s [0x%04x] -> 0x%04x\n", reg_p->name,
 423                                   (uint32_t)offset, s->reg[i]);
 424            return s->reg[i];
 425        }
 426        reg_p++;
 427    }
 428    PRINT_DEBUG("QEMU PMU ERROR: bad read offset 0x%04x\n", (uint32_t)offset);
 429    return 0;
 430}
 431
 432static void exynos4210_pmu_write(void *opaque, hwaddr offset,
 433                                 uint64_t val, unsigned size)
 434{
 435    Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
 436    const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs;
 437    unsigned int i;
 438
 439    for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
 440        if (reg_p->offset == offset) {
 441            PRINT_DEBUG_EXTEND("%s <0x%04x> <- 0x%04x\n", reg_p->name,
 442                    (uint32_t)offset, (uint32_t)val);
 443            s->reg[i] = val;
 444            if ((offset == PS_HOLD_CONTROL) && ((val & BIT(8)) == 0)) {
 445                /*
 446                 * We are interested only in setting data bit
 447                 * of PS_HOLD_CONTROL register to indicate power off request.
 448                 */
 449                exynos4210_pmu_poweroff();
 450            }
 451            return;
 452        }
 453        reg_p++;
 454    }
 455    PRINT_DEBUG("QEMU PMU ERROR: bad write offset 0x%04x\n", (uint32_t)offset);
 456}
 457
 458static const MemoryRegionOps exynos4210_pmu_ops = {
 459    .read = exynos4210_pmu_read,
 460    .write = exynos4210_pmu_write,
 461    .endianness = DEVICE_NATIVE_ENDIAN,
 462    .valid = {
 463        .min_access_size = 4,
 464        .max_access_size = 4,
 465        .unaligned = false
 466    }
 467};
 468
 469static void exynos4210_pmu_reset(DeviceState *dev)
 470{
 471    Exynos4210PmuState *s = EXYNOS4210_PMU(dev);
 472    unsigned i;
 473
 474    /* Set default values for registers */
 475    for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
 476        s->reg[i] = exynos4210_pmu_regs[i].reset_value;
 477    }
 478}
 479
 480static void exynos4210_pmu_init(Object *obj)
 481{
 482    Exynos4210PmuState *s = EXYNOS4210_PMU(obj);
 483    SysBusDevice *dev = SYS_BUS_DEVICE(obj);
 484
 485    /* memory mapping */
 486    memory_region_init_io(&s->iomem, obj, &exynos4210_pmu_ops, s,
 487                          "exynos4210.pmu", EXYNOS4210_PMU_REGS_MEM_SIZE);
 488    sysbus_init_mmio(dev, &s->iomem);
 489}
 490
 491static const VMStateDescription exynos4210_pmu_vmstate = {
 492    .name = "exynos4210.pmu",
 493    .version_id = 1,
 494    .minimum_version_id = 1,
 495    .fields = (VMStateField[]) {
 496        VMSTATE_UINT32_ARRAY(reg, Exynos4210PmuState, PMU_NUM_OF_REGISTERS),
 497        VMSTATE_END_OF_LIST()
 498    }
 499};
 500
 501static void exynos4210_pmu_class_init(ObjectClass *klass, void *data)
 502{
 503    DeviceClass *dc = DEVICE_CLASS(klass);
 504
 505    dc->reset = exynos4210_pmu_reset;
 506    dc->vmsd = &exynos4210_pmu_vmstate;
 507}
 508
 509static const TypeInfo exynos4210_pmu_info = {
 510    .name          = TYPE_EXYNOS4210_PMU,
 511    .parent        = TYPE_SYS_BUS_DEVICE,
 512    .instance_size = sizeof(Exynos4210PmuState),
 513    .instance_init = exynos4210_pmu_init,
 514    .class_init    = exynos4210_pmu_class_init,
 515};
 516
 517static void exynos4210_pmu_register(void)
 518{
 519    type_register_static(&exynos4210_pmu_info);
 520}
 521
 522type_init(exynos4210_pmu_register)
 523