LXR qemu/include/hw/arm/soc

   1/*
   2 * On-chip DMA controller framework.
   3 *
   4 * Copyright (C) 2008 Nokia Corporation
   5 * Written by Andrzej Zaborowski <andrew@openedhand.com>
   6 *
   7 * This program is free software; you can redistribute it and/or
   8 * modify it under the terms of the GNU General Public License as
   9 * published by the Free Software Foundation; either version 2 or
  10 * (at your option) version 3 of the License.
  11 *
  12 * This program is distributed in the hope that it will be useful,
  13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 * GNU General Public License for more details.
  16 *
  17 * You should have received a copy of the GNU General Public License along
  18 * with this program; if not, see <http://www.gnu.org/licenses/>.
  19 */
  20
  21#ifndef HW_SOC_DMA_H
  22#define HW_SOC_DMA_H
  23
  24#include "exec/hwaddr.h"
  25
  26struct soc_dma_s;
  27struct soc_dma_ch_s;
  28typedef void (*soc_dma_io_t)(void *opaque, uint8_t *buf, int len);
  29typedef void (*soc_dma_transfer_t)(struct soc_dma_ch_s *ch);
  30
  31enum soc_dma_port_type {
  32    soc_dma_port_mem,
  33    soc_dma_port_fifo,
  34    soc_dma_port_other,
  35};
  36
  37enum soc_dma_access_type {
  38    soc_dma_access_const,
  39    soc_dma_access_linear,
  40    soc_dma_access_other,
  41};
  42
  43struct soc_dma_ch_s {
  44    /* Private */
  45    struct soc_dma_s *dma;
  46    int num;
  47    QEMUTimer *timer;
  48
  49    /* Set by soc_dma.c */
  50    int enable;
  51    int update;
  52
  53    /* This should be set by dma->setup_fn().  */
  54    int bytes;
  55    /* Initialised by the DMA module, call soc_dma_ch_update after writing.  */
  56    enum soc_dma_access_type type[2];
  57    hwaddr vaddr[2];    /* Updated by .transfer_fn().  */
  58    /* Private */
  59    void *paddr[2];
  60    soc_dma_io_t io_fn[2];
  61    void *io_opaque[2];
  62
  63    int running;
  64    soc_dma_transfer_t transfer_fn;
  65
  66    /* Set and used by the DMA module.  */
  67    void *opaque;
  68};
  69
  70struct soc_dma_s {
  71    /* Following fields are set by the SoC DMA module and can be used
  72     * by anybody.  */
  73    uint64_t drqbmp;    /* Is zeroed by soc_dma_reset() */
  74    qemu_irq *drq;
  75    void *opaque;
  76    int64_t freq;
  77    soc_dma_transfer_t transfer_fn;
  78    soc_dma_transfer_t setup_fn;
  79    /* Set by soc_dma_init() for use by the DMA module.  */
  80    struct soc_dma_ch_s *ch;
  81};
  82
  83/* Call to activate or stop a DMA channel.  */
  84void soc_dma_set_request(struct soc_dma_ch_s *ch, int level);
  85/* Call after every write to one of the following fields and before
  86 * calling soc_dma_set_request(ch, 1):
  87 *   ch->type[0...1],
  88 *   ch->vaddr[0...1],
  89 *   ch->paddr[0...1],
  90 * or after a soc_dma_port_add_fifo() or soc_dma_port_add_mem().  */
  91void soc_dma_ch_update(struct soc_dma_ch_s *ch);
  92
  93/* The SoC should call this when the DMA module is being reset.  */
  94void soc_dma_reset(struct soc_dma_s *s);
  95struct soc_dma_s *soc_dma_init(int n);
  96
  97void soc_dma_port_add_fifo(struct soc_dma_s *dma, hwaddr virt_base,
  98                soc_dma_io_t fn, void *opaque, int out);
  99void soc_dma_port_add_mem(struct soc_dma_s *dma, uint8_t *phys_base,
 100                hwaddr virt_base, size_t size);
 101
 102static inline void soc_dma_port_add_fifo_in(struct soc_dma_s *dma,
 103                hwaddr virt_base, soc_dma_io_t fn, void *opaque)
 104{
 105    return soc_dma_port_add_fifo(dma, virt_base, fn, opaque, 0);
 106}
 107
 108static inline void soc_dma_port_add_fifo_out(struct soc_dma_s *dma,
 109                hwaddr virt_base, soc_dma_io_t fn, void *opaque)
 110{
 111    return soc_dma_port_add_fifo(dma, virt_base, fn, opaque, 1);
 112}
 113
 114#endif
 115