qemu/hw/arm/sbsa-ref.c
<<
>>
Prefs
   1/*
   2 * ARM SBSA Reference Platform emulation
   3 *
   4 * Copyright (c) 2018 Linaro Limited
   5 * Written by Hongbo Zhang <hongbo.zhang@linaro.org>
   6 *
   7 * This program is free software; you can redistribute it and/or modify it
   8 * under the terms and conditions of the GNU General Public License,
   9 * version 2 or later, as published by the Free Software Foundation.
  10 *
  11 * This program is distributed in the hope it will be useful, but WITHOUT
  12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  14 * more details.
  15 *
  16 * You should have received a copy of the GNU General Public License along with
  17 * this program.  If not, see <http://www.gnu.org/licenses/>.
  18 */
  19
  20#include "qemu/osdep.h"
  21#include "qemu/datadir.h"
  22#include "qapi/error.h"
  23#include "qemu/error-report.h"
  24#include "qemu/units.h"
  25#include "sysemu/device_tree.h"
  26#include "sysemu/numa.h"
  27#include "sysemu/runstate.h"
  28#include "sysemu/sysemu.h"
  29#include "exec/hwaddr.h"
  30#include "kvm_arm.h"
  31#include "hw/arm/boot.h"
  32#include "hw/block/flash.h"
  33#include "hw/boards.h"
  34#include "hw/ide/internal.h"
  35#include "hw/ide/ahci_internal.h"
  36#include "hw/intc/arm_gicv3_common.h"
  37#include "hw/loader.h"
  38#include "hw/pci-host/gpex.h"
  39#include "hw/qdev-properties.h"
  40#include "hw/usb.h"
  41#include "hw/char/pl011.h"
  42#include "hw/watchdog/sbsa_gwdt.h"
  43#include "net/net.h"
  44#include "qom/object.h"
  45
  46#define RAMLIMIT_GB 8192
  47#define RAMLIMIT_BYTES (RAMLIMIT_GB * GiB)
  48
  49#define NUM_IRQS        256
  50#define NUM_SMMU_IRQS   4
  51#define NUM_SATA_PORTS  6
  52
  53#define VIRTUAL_PMU_IRQ        7
  54#define ARCH_GIC_MAINT_IRQ     9
  55#define ARCH_TIMER_VIRT_IRQ    11
  56#define ARCH_TIMER_S_EL1_IRQ   13
  57#define ARCH_TIMER_NS_EL1_IRQ  14
  58#define ARCH_TIMER_NS_EL2_IRQ  10
  59
  60enum {
  61    SBSA_FLASH,
  62    SBSA_MEM,
  63    SBSA_CPUPERIPHS,
  64    SBSA_GIC_DIST,
  65    SBSA_GIC_REDIST,
  66    SBSA_SECURE_EC,
  67    SBSA_GWDT_WS0,
  68    SBSA_GWDT_REFRESH,
  69    SBSA_GWDT_CONTROL,
  70    SBSA_SMMU,
  71    SBSA_UART,
  72    SBSA_RTC,
  73    SBSA_PCIE,
  74    SBSA_PCIE_MMIO,
  75    SBSA_PCIE_MMIO_HIGH,
  76    SBSA_PCIE_PIO,
  77    SBSA_PCIE_ECAM,
  78    SBSA_GPIO,
  79    SBSA_SECURE_UART,
  80    SBSA_SECURE_UART_MM,
  81    SBSA_SECURE_MEM,
  82    SBSA_AHCI,
  83    SBSA_EHCI,
  84};
  85
  86struct SBSAMachineState {
  87    MachineState parent;
  88    struct arm_boot_info bootinfo;
  89    int smp_cpus;
  90    void *fdt;
  91    int fdt_size;
  92    int psci_conduit;
  93    DeviceState *gic;
  94    PFlashCFI01 *flash[2];
  95};
  96
  97#define TYPE_SBSA_MACHINE   MACHINE_TYPE_NAME("sbsa-ref")
  98OBJECT_DECLARE_SIMPLE_TYPE(SBSAMachineState, SBSA_MACHINE)
  99
 100static const MemMapEntry sbsa_ref_memmap[] = {
 101    /* 512M boot ROM */
 102    [SBSA_FLASH] =              {          0, 0x20000000 },
 103    /* 512M secure memory */
 104    [SBSA_SECURE_MEM] =         { 0x20000000, 0x20000000 },
 105    /* Space reserved for CPU peripheral devices */
 106    [SBSA_CPUPERIPHS] =         { 0x40000000, 0x00040000 },
 107    [SBSA_GIC_DIST] =           { 0x40060000, 0x00010000 },
 108    [SBSA_GIC_REDIST] =         { 0x40080000, 0x04000000 },
 109    [SBSA_SECURE_EC] =          { 0x50000000, 0x00001000 },
 110    [SBSA_GWDT_REFRESH] =       { 0x50010000, 0x00001000 },
 111    [SBSA_GWDT_CONTROL] =       { 0x50011000, 0x00001000 },
 112    [SBSA_UART] =               { 0x60000000, 0x00001000 },
 113    [SBSA_RTC] =                { 0x60010000, 0x00001000 },
 114    [SBSA_GPIO] =               { 0x60020000, 0x00001000 },
 115    [SBSA_SECURE_UART] =        { 0x60030000, 0x00001000 },
 116    [SBSA_SECURE_UART_MM] =     { 0x60040000, 0x00001000 },
 117    [SBSA_SMMU] =               { 0x60050000, 0x00020000 },
 118    /* Space here reserved for more SMMUs */
 119    [SBSA_AHCI] =               { 0x60100000, 0x00010000 },
 120    [SBSA_EHCI] =               { 0x60110000, 0x00010000 },
 121    /* Space here reserved for other devices */
 122    [SBSA_PCIE_PIO] =           { 0x7fff0000, 0x00010000 },
 123    /* 32-bit address PCIE MMIO space */
 124    [SBSA_PCIE_MMIO] =          { 0x80000000, 0x70000000 },
 125    /* 256M PCIE ECAM space */
 126    [SBSA_PCIE_ECAM] =          { 0xf0000000, 0x10000000 },
 127    /* ~1TB PCIE MMIO space (4GB to 1024GB boundary) */
 128    [SBSA_PCIE_MMIO_HIGH] =     { 0x100000000ULL, 0xFF00000000ULL },
 129    [SBSA_MEM] =                { 0x10000000000ULL, RAMLIMIT_BYTES },
 130};
 131
 132static const int sbsa_ref_irqmap[] = {
 133    [SBSA_UART] = 1,
 134    [SBSA_RTC] = 2,
 135    [SBSA_PCIE] = 3, /* ... to 6 */
 136    [SBSA_GPIO] = 7,
 137    [SBSA_SECURE_UART] = 8,
 138    [SBSA_SECURE_UART_MM] = 9,
 139    [SBSA_AHCI] = 10,
 140    [SBSA_EHCI] = 11,
 141    [SBSA_SMMU] = 12, /* ... to 15 */
 142    [SBSA_GWDT_WS0] = 16,
 143};
 144
 145static const char * const valid_cpus[] = {
 146    ARM_CPU_TYPE_NAME("cortex-a57"),
 147    ARM_CPU_TYPE_NAME("cortex-a72"),
 148    ARM_CPU_TYPE_NAME("cortex-a76"),
 149    ARM_CPU_TYPE_NAME("neoverse-n1"),
 150    ARM_CPU_TYPE_NAME("max"),
 151};
 152
 153static bool cpu_type_valid(const char *cpu)
 154{
 155    int i;
 156
 157    for (i = 0; i < ARRAY_SIZE(valid_cpus); i++) {
 158        if (strcmp(cpu, valid_cpus[i]) == 0) {
 159            return true;
 160        }
 161    }
 162    return false;
 163}
 164
 165static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx)
 166{
 167    uint8_t clustersz = ARM_DEFAULT_CPUS_PER_CLUSTER;
 168    return arm_cpu_mp_affinity(idx, clustersz);
 169}
 170
 171/*
 172 * Firmware on this machine only uses ACPI table to load OS, these limited
 173 * device tree nodes are just to let firmware know the info which varies from
 174 * command line parameters, so it is not necessary to be fully compatible
 175 * with the kernel CPU and NUMA binding rules.
 176 */
 177static void create_fdt(SBSAMachineState *sms)
 178{
 179    void *fdt = create_device_tree(&sms->fdt_size);
 180    const MachineState *ms = MACHINE(sms);
 181    int nb_numa_nodes = ms->numa_state->num_nodes;
 182    int cpu;
 183
 184    if (!fdt) {
 185        error_report("create_device_tree() failed");
 186        exit(1);
 187    }
 188
 189    sms->fdt = fdt;
 190
 191    qemu_fdt_setprop_string(fdt, "/", "compatible", "linux,sbsa-ref");
 192    qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
 193    qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
 194
 195    /*
 196     * This versioning scheme is for informing platform fw only. It is neither:
 197     * - A QEMU versioned machine type; a given version of QEMU will emulate
 198     *   a given version of the platform.
 199     * - A reflection of level of SBSA (now SystemReady SR) support provided.
 200     *
 201     * machine-version-major: updated when changes breaking fw compatibility
 202     *                        are introduced.
 203     * machine-version-minor: updated when features are added that don't break
 204     *                        fw compatibility.
 205     */
 206    qemu_fdt_setprop_cell(fdt, "/", "machine-version-major", 0);
 207    qemu_fdt_setprop_cell(fdt, "/", "machine-version-minor", 0);
 208
 209    if (ms->numa_state->have_numa_distance) {
 210        int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t);
 211        uint32_t *matrix = g_malloc0(size);
 212        int idx, i, j;
 213
 214        for (i = 0; i < nb_numa_nodes; i++) {
 215            for (j = 0; j < nb_numa_nodes; j++) {
 216                idx = (i * nb_numa_nodes + j) * 3;
 217                matrix[idx + 0] = cpu_to_be32(i);
 218                matrix[idx + 1] = cpu_to_be32(j);
 219                matrix[idx + 2] =
 220                    cpu_to_be32(ms->numa_state->nodes[i].distance[j]);
 221            }
 222        }
 223
 224        qemu_fdt_add_subnode(fdt, "/distance-map");
 225        qemu_fdt_setprop(fdt, "/distance-map", "distance-matrix",
 226                         matrix, size);
 227        g_free(matrix);
 228    }
 229
 230    /*
 231     * From Documentation/devicetree/bindings/arm/cpus.yaml
 232     *  On ARM v8 64-bit systems this property is required
 233     *    and matches the MPIDR_EL1 register affinity bits.
 234     *
 235     *    * If cpus node's #address-cells property is set to 2
 236     *
 237     *      The first reg cell bits [7:0] must be set to
 238     *      bits [39:32] of MPIDR_EL1.
 239     *
 240     *      The second reg cell bits [23:0] must be set to
 241     *      bits [23:0] of MPIDR_EL1.
 242     */
 243    qemu_fdt_add_subnode(sms->fdt, "/cpus");
 244    qemu_fdt_setprop_cell(sms->fdt, "/cpus", "#address-cells", 2);
 245    qemu_fdt_setprop_cell(sms->fdt, "/cpus", "#size-cells", 0x0);
 246
 247    for (cpu = sms->smp_cpus - 1; cpu >= 0; cpu--) {
 248        char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
 249        ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu));
 250        CPUState *cs = CPU(armcpu);
 251        uint64_t mpidr = sbsa_ref_cpu_mp_affinity(sms, cpu);
 252
 253        qemu_fdt_add_subnode(sms->fdt, nodename);
 254        qemu_fdt_setprop_u64(sms->fdt, nodename, "reg", mpidr);
 255
 256        if (ms->possible_cpus->cpus[cs->cpu_index].props.has_node_id) {
 257            qemu_fdt_setprop_cell(sms->fdt, nodename, "numa-node-id",
 258                ms->possible_cpus->cpus[cs->cpu_index].props.node_id);
 259        }
 260
 261        g_free(nodename);
 262    }
 263}
 264
 265#define SBSA_FLASH_SECTOR_SIZE (256 * KiB)
 266
 267static PFlashCFI01 *sbsa_flash_create1(SBSAMachineState *sms,
 268                                        const char *name,
 269                                        const char *alias_prop_name)
 270{
 271    /*
 272     * Create a single flash device.  We use the same parameters as
 273     * the flash devices on the Versatile Express board.
 274     */
 275    DeviceState *dev = qdev_new(TYPE_PFLASH_CFI01);
 276
 277    qdev_prop_set_uint64(dev, "sector-length", SBSA_FLASH_SECTOR_SIZE);
 278    qdev_prop_set_uint8(dev, "width", 4);
 279    qdev_prop_set_uint8(dev, "device-width", 2);
 280    qdev_prop_set_bit(dev, "big-endian", false);
 281    qdev_prop_set_uint16(dev, "id0", 0x89);
 282    qdev_prop_set_uint16(dev, "id1", 0x18);
 283    qdev_prop_set_uint16(dev, "id2", 0x00);
 284    qdev_prop_set_uint16(dev, "id3", 0x00);
 285    qdev_prop_set_string(dev, "name", name);
 286    object_property_add_child(OBJECT(sms), name, OBJECT(dev));
 287    object_property_add_alias(OBJECT(sms), alias_prop_name,
 288                              OBJECT(dev), "drive");
 289    return PFLASH_CFI01(dev);
 290}
 291
 292static void sbsa_flash_create(SBSAMachineState *sms)
 293{
 294    sms->flash[0] = sbsa_flash_create1(sms, "sbsa.flash0", "pflash0");
 295    sms->flash[1] = sbsa_flash_create1(sms, "sbsa.flash1", "pflash1");
 296}
 297
 298static void sbsa_flash_map1(PFlashCFI01 *flash,
 299                            hwaddr base, hwaddr size,
 300                            MemoryRegion *sysmem)
 301{
 302    DeviceState *dev = DEVICE(flash);
 303
 304    assert(QEMU_IS_ALIGNED(size, SBSA_FLASH_SECTOR_SIZE));
 305    assert(size / SBSA_FLASH_SECTOR_SIZE <= UINT32_MAX);
 306    qdev_prop_set_uint32(dev, "num-blocks", size / SBSA_FLASH_SECTOR_SIZE);
 307    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 308
 309    memory_region_add_subregion(sysmem, base,
 310                                sysbus_mmio_get_region(SYS_BUS_DEVICE(dev),
 311                                                       0));
 312}
 313
 314static void sbsa_flash_map(SBSAMachineState *sms,
 315                           MemoryRegion *sysmem,
 316                           MemoryRegion *secure_sysmem)
 317{
 318    /*
 319     * Map two flash devices to fill the SBSA_FLASH space in the memmap.
 320     * sysmem is the system memory space. secure_sysmem is the secure view
 321     * of the system, and the first flash device should be made visible only
 322     * there. The second flash device is visible to both secure and nonsecure.
 323     */
 324    hwaddr flashsize = sbsa_ref_memmap[SBSA_FLASH].size / 2;
 325    hwaddr flashbase = sbsa_ref_memmap[SBSA_FLASH].base;
 326
 327    sbsa_flash_map1(sms->flash[0], flashbase, flashsize,
 328                    secure_sysmem);
 329    sbsa_flash_map1(sms->flash[1], flashbase + flashsize, flashsize,
 330                    sysmem);
 331}
 332
 333static bool sbsa_firmware_init(SBSAMachineState *sms,
 334                               MemoryRegion *sysmem,
 335                               MemoryRegion *secure_sysmem)
 336{
 337    const char *bios_name;
 338    int i;
 339    BlockBackend *pflash_blk0;
 340
 341    /* Map legacy -drive if=pflash to machine properties */
 342    for (i = 0; i < ARRAY_SIZE(sms->flash); i++) {
 343        pflash_cfi01_legacy_drive(sms->flash[i],
 344                                  drive_get(IF_PFLASH, 0, i));
 345    }
 346
 347    sbsa_flash_map(sms, sysmem, secure_sysmem);
 348
 349    pflash_blk0 = pflash_cfi01_get_blk(sms->flash[0]);
 350
 351    bios_name = MACHINE(sms)->firmware;
 352    if (bios_name) {
 353        char *fname;
 354        MemoryRegion *mr;
 355        int image_size;
 356
 357        if (pflash_blk0) {
 358            error_report("The contents of the first flash device may be "
 359                         "specified with -bios or with -drive if=pflash... "
 360                         "but you cannot use both options at once");
 361            exit(1);
 362        }
 363
 364        /* Fall back to -bios */
 365
 366        fname = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
 367        if (!fname) {
 368            error_report("Could not find ROM image '%s'", bios_name);
 369            exit(1);
 370        }
 371        mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(sms->flash[0]), 0);
 372        image_size = load_image_mr(fname, mr);
 373        g_free(fname);
 374        if (image_size < 0) {
 375            error_report("Could not load ROM image '%s'", bios_name);
 376            exit(1);
 377        }
 378    }
 379
 380    return pflash_blk0 || bios_name;
 381}
 382
 383static void create_secure_ram(SBSAMachineState *sms,
 384                              MemoryRegion *secure_sysmem)
 385{
 386    MemoryRegion *secram = g_new(MemoryRegion, 1);
 387    hwaddr base = sbsa_ref_memmap[SBSA_SECURE_MEM].base;
 388    hwaddr size = sbsa_ref_memmap[SBSA_SECURE_MEM].size;
 389
 390    memory_region_init_ram(secram, NULL, "sbsa-ref.secure-ram", size,
 391                           &error_fatal);
 392    memory_region_add_subregion(secure_sysmem, base, secram);
 393}
 394
 395static void create_gic(SBSAMachineState *sms)
 396{
 397    unsigned int smp_cpus = MACHINE(sms)->smp.cpus;
 398    SysBusDevice *gicbusdev;
 399    const char *gictype;
 400    uint32_t redist0_capacity, redist0_count;
 401    int i;
 402
 403    gictype = gicv3_class_name();
 404
 405    sms->gic = qdev_new(gictype);
 406    qdev_prop_set_uint32(sms->gic, "revision", 3);
 407    qdev_prop_set_uint32(sms->gic, "num-cpu", smp_cpus);
 408    /*
 409     * Note that the num-irq property counts both internal and external
 410     * interrupts; there are always 32 of the former (mandated by GIC spec).
 411     */
 412    qdev_prop_set_uint32(sms->gic, "num-irq", NUM_IRQS + 32);
 413    qdev_prop_set_bit(sms->gic, "has-security-extensions", true);
 414
 415    redist0_capacity =
 416                sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE;
 417    redist0_count = MIN(smp_cpus, redist0_capacity);
 418
 419    qdev_prop_set_uint32(sms->gic, "len-redist-region-count", 1);
 420    qdev_prop_set_uint32(sms->gic, "redist-region-count[0]", redist0_count);
 421
 422    gicbusdev = SYS_BUS_DEVICE(sms->gic);
 423    sysbus_realize_and_unref(gicbusdev, &error_fatal);
 424    sysbus_mmio_map(gicbusdev, 0, sbsa_ref_memmap[SBSA_GIC_DIST].base);
 425    sysbus_mmio_map(gicbusdev, 1, sbsa_ref_memmap[SBSA_GIC_REDIST].base);
 426
 427    /*
 428     * Wire the outputs from each CPU's generic timer and the GICv3
 429     * maintenance interrupt signal to the appropriate GIC PPI inputs,
 430     * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs.
 431     */
 432    for (i = 0; i < smp_cpus; i++) {
 433        DeviceState *cpudev = DEVICE(qemu_get_cpu(i));
 434        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
 435        int irq;
 436        /*
 437         * Mapping from the output timer irq lines from the CPU to the
 438         * GIC PPI inputs used for this board.
 439         */
 440        const int timer_irq[] = {
 441            [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
 442            [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
 443            [GTIMER_HYP]  = ARCH_TIMER_NS_EL2_IRQ,
 444            [GTIMER_SEC]  = ARCH_TIMER_S_EL1_IRQ,
 445        };
 446
 447        for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
 448            qdev_connect_gpio_out(cpudev, irq,
 449                                  qdev_get_gpio_in(sms->gic,
 450                                                   ppibase + timer_irq[irq]));
 451        }
 452
 453        qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0,
 454                                    qdev_get_gpio_in(sms->gic, ppibase
 455                                                     + ARCH_GIC_MAINT_IRQ));
 456        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
 457                                    qdev_get_gpio_in(sms->gic, ppibase
 458                                                     + VIRTUAL_PMU_IRQ));
 459
 460        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
 461        sysbus_connect_irq(gicbusdev, i + smp_cpus,
 462                           qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
 463        sysbus_connect_irq(gicbusdev, i + 2 * smp_cpus,
 464                           qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
 465        sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus,
 466                           qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
 467    }
 468}
 469
 470static void create_uart(const SBSAMachineState *sms, int uart,
 471                        MemoryRegion *mem, Chardev *chr)
 472{
 473    hwaddr base = sbsa_ref_memmap[uart].base;
 474    int irq = sbsa_ref_irqmap[uart];
 475    DeviceState *dev = qdev_new(TYPE_PL011);
 476    SysBusDevice *s = SYS_BUS_DEVICE(dev);
 477
 478    qdev_prop_set_chr(dev, "chardev", chr);
 479    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 480    memory_region_add_subregion(mem, base,
 481                                sysbus_mmio_get_region(s, 0));
 482    sysbus_connect_irq(s, 0, qdev_get_gpio_in(sms->gic, irq));
 483}
 484
 485static void create_rtc(const SBSAMachineState *sms)
 486{
 487    hwaddr base = sbsa_ref_memmap[SBSA_RTC].base;
 488    int irq = sbsa_ref_irqmap[SBSA_RTC];
 489
 490    sysbus_create_simple("pl031", base, qdev_get_gpio_in(sms->gic, irq));
 491}
 492
 493static void create_wdt(const SBSAMachineState *sms)
 494{
 495    hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base;
 496    hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base;
 497    DeviceState *dev = qdev_new(TYPE_WDT_SBSA);
 498    SysBusDevice *s = SYS_BUS_DEVICE(dev);
 499    int irq = sbsa_ref_irqmap[SBSA_GWDT_WS0];
 500
 501    sysbus_realize_and_unref(s, &error_fatal);
 502    sysbus_mmio_map(s, 0, rbase);
 503    sysbus_mmio_map(s, 1, cbase);
 504    sysbus_connect_irq(s, 0, qdev_get_gpio_in(sms->gic, irq));
 505}
 506
 507static DeviceState *gpio_key_dev;
 508static void sbsa_ref_powerdown_req(Notifier *n, void *opaque)
 509{
 510    /* use gpio Pin 3 for power button event */
 511    qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1);
 512}
 513
 514static Notifier sbsa_ref_powerdown_notifier = {
 515    .notify = sbsa_ref_powerdown_req
 516};
 517
 518static void create_gpio(const SBSAMachineState *sms)
 519{
 520    DeviceState *pl061_dev;
 521    hwaddr base = sbsa_ref_memmap[SBSA_GPIO].base;
 522    int irq = sbsa_ref_irqmap[SBSA_GPIO];
 523
 524    pl061_dev = sysbus_create_simple("pl061", base,
 525                                     qdev_get_gpio_in(sms->gic, irq));
 526
 527    gpio_key_dev = sysbus_create_simple("gpio-key", -1,
 528                                        qdev_get_gpio_in(pl061_dev, 3));
 529
 530    /* connect powerdown request */
 531    qemu_register_powerdown_notifier(&sbsa_ref_powerdown_notifier);
 532}
 533
 534static void create_ahci(const SBSAMachineState *sms)
 535{
 536    hwaddr base = sbsa_ref_memmap[SBSA_AHCI].base;
 537    int irq = sbsa_ref_irqmap[SBSA_AHCI];
 538    DeviceState *dev;
 539    DriveInfo *hd[NUM_SATA_PORTS];
 540    SysbusAHCIState *sysahci;
 541    AHCIState *ahci;
 542    int i;
 543
 544    dev = qdev_new("sysbus-ahci");
 545    qdev_prop_set_uint32(dev, "num-ports", NUM_SATA_PORTS);
 546    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 547    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
 548    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, qdev_get_gpio_in(sms->gic, irq));
 549
 550    sysahci = SYSBUS_AHCI(dev);
 551    ahci = &sysahci->ahci;
 552    ide_drive_get(hd, ARRAY_SIZE(hd));
 553    for (i = 0; i < ahci->ports; i++) {
 554        if (hd[i] == NULL) {
 555            continue;
 556        }
 557        ide_create_drive(&ahci->dev[i].port, 0, hd[i]);
 558    }
 559}
 560
 561static void create_ehci(const SBSAMachineState *sms)
 562{
 563    hwaddr base = sbsa_ref_memmap[SBSA_EHCI].base;
 564    int irq = sbsa_ref_irqmap[SBSA_EHCI];
 565
 566    sysbus_create_simple("platform-ehci-usb", base,
 567                         qdev_get_gpio_in(sms->gic, irq));
 568}
 569
 570static void create_smmu(const SBSAMachineState *sms, PCIBus *bus)
 571{
 572    hwaddr base = sbsa_ref_memmap[SBSA_SMMU].base;
 573    int irq =  sbsa_ref_irqmap[SBSA_SMMU];
 574    DeviceState *dev;
 575    int i;
 576
 577    dev = qdev_new("arm-smmuv3");
 578
 579    object_property_set_link(OBJECT(dev), "primary-bus", OBJECT(bus),
 580                             &error_abort);
 581    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 582    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
 583    for (i = 0; i < NUM_SMMU_IRQS; i++) {
 584        sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
 585                           qdev_get_gpio_in(sms->gic, irq + i));
 586    }
 587}
 588
 589static void create_pcie(SBSAMachineState *sms)
 590{
 591    hwaddr base_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].base;
 592    hwaddr size_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].size;
 593    hwaddr base_mmio = sbsa_ref_memmap[SBSA_PCIE_MMIO].base;
 594    hwaddr size_mmio = sbsa_ref_memmap[SBSA_PCIE_MMIO].size;
 595    hwaddr base_mmio_high = sbsa_ref_memmap[SBSA_PCIE_MMIO_HIGH].base;
 596    hwaddr size_mmio_high = sbsa_ref_memmap[SBSA_PCIE_MMIO_HIGH].size;
 597    hwaddr base_pio = sbsa_ref_memmap[SBSA_PCIE_PIO].base;
 598    int irq = sbsa_ref_irqmap[SBSA_PCIE];
 599    MemoryRegion *mmio_alias, *mmio_alias_high, *mmio_reg;
 600    MemoryRegion *ecam_alias, *ecam_reg;
 601    DeviceState *dev;
 602    PCIHostState *pci;
 603    int i;
 604
 605    dev = qdev_new(TYPE_GPEX_HOST);
 606    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 607
 608    /* Map ECAM space */
 609    ecam_alias = g_new0(MemoryRegion, 1);
 610    ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
 611    memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam",
 612                             ecam_reg, 0, size_ecam);
 613    memory_region_add_subregion(get_system_memory(), base_ecam, ecam_alias);
 614
 615    /* Map the MMIO space */
 616    mmio_alias = g_new0(MemoryRegion, 1);
 617    mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
 618    memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
 619                             mmio_reg, base_mmio, size_mmio);
 620    memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias);
 621
 622    /* Map the MMIO_HIGH space */
 623    mmio_alias_high = g_new0(MemoryRegion, 1);
 624    memory_region_init_alias(mmio_alias_high, OBJECT(dev), "pcie-mmio-high",
 625                             mmio_reg, base_mmio_high, size_mmio_high);
 626    memory_region_add_subregion(get_system_memory(), base_mmio_high,
 627                                mmio_alias_high);
 628
 629    /* Map IO port space */
 630    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio);
 631
 632    for (i = 0; i < GPEX_NUM_IRQS; i++) {
 633        sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
 634                           qdev_get_gpio_in(sms->gic, irq + i));
 635        gpex_set_irq_num(GPEX_HOST(dev), i, irq + i);
 636    }
 637
 638    pci = PCI_HOST_BRIDGE(dev);
 639    if (pci->bus) {
 640        for (i = 0; i < nb_nics; i++) {
 641            NICInfo *nd = &nd_table[i];
 642
 643            if (!nd->model) {
 644                nd->model = g_strdup("e1000e");
 645            }
 646
 647            pci_nic_init_nofail(nd, pci->bus, nd->model, NULL);
 648        }
 649    }
 650
 651    pci_create_simple(pci->bus, -1, "VGA");
 652
 653    create_smmu(sms, pci->bus);
 654}
 655
 656static void *sbsa_ref_dtb(const struct arm_boot_info *binfo, int *fdt_size)
 657{
 658    const SBSAMachineState *board = container_of(binfo, SBSAMachineState,
 659                                                 bootinfo);
 660
 661    *fdt_size = board->fdt_size;
 662    return board->fdt;
 663}
 664
 665static void create_secure_ec(MemoryRegion *mem)
 666{
 667    hwaddr base = sbsa_ref_memmap[SBSA_SECURE_EC].base;
 668    DeviceState *dev = qdev_new("sbsa-ec");
 669    SysBusDevice *s = SYS_BUS_DEVICE(dev);
 670
 671    memory_region_add_subregion(mem, base,
 672                                sysbus_mmio_get_region(s, 0));
 673}
 674
 675static void sbsa_ref_init(MachineState *machine)
 676{
 677    unsigned int smp_cpus = machine->smp.cpus;
 678    unsigned int max_cpus = machine->smp.max_cpus;
 679    SBSAMachineState *sms = SBSA_MACHINE(machine);
 680    MachineClass *mc = MACHINE_GET_CLASS(machine);
 681    MemoryRegion *sysmem = get_system_memory();
 682    MemoryRegion *secure_sysmem = g_new(MemoryRegion, 1);
 683    bool firmware_loaded;
 684    const CPUArchIdList *possible_cpus;
 685    int n, sbsa_max_cpus;
 686
 687    if (!cpu_type_valid(machine->cpu_type)) {
 688        error_report("sbsa-ref: CPU type %s not supported", machine->cpu_type);
 689        exit(1);
 690    }
 691
 692    if (kvm_enabled()) {
 693        error_report("sbsa-ref: KVM is not supported for this machine");
 694        exit(1);
 695    }
 696
 697    /*
 698     * The Secure view of the world is the same as the NonSecure,
 699     * but with a few extra devices. Create it as a container region
 700     * containing the system memory at low priority; any secure-only
 701     * devices go in at higher priority and take precedence.
 702     */
 703    memory_region_init(secure_sysmem, OBJECT(machine), "secure-memory",
 704                       UINT64_MAX);
 705    memory_region_add_subregion_overlap(secure_sysmem, 0, sysmem, -1);
 706
 707    firmware_loaded = sbsa_firmware_init(sms, sysmem, secure_sysmem);
 708
 709    /*
 710     * This machine has EL3 enabled, external firmware should supply PSCI
 711     * implementation, so the QEMU's internal PSCI is disabled.
 712     */
 713    sms->psci_conduit = QEMU_PSCI_CONDUIT_DISABLED;
 714
 715    sbsa_max_cpus = sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE;
 716
 717    if (max_cpus > sbsa_max_cpus) {
 718        error_report("Number of SMP CPUs requested (%d) exceeds max CPUs "
 719                     "supported by machine 'sbsa-ref' (%d)",
 720                     max_cpus, sbsa_max_cpus);
 721        exit(1);
 722    }
 723
 724    sms->smp_cpus = smp_cpus;
 725
 726    if (machine->ram_size > sbsa_ref_memmap[SBSA_MEM].size) {
 727        error_report("sbsa-ref: cannot model more than %dGB RAM", RAMLIMIT_GB);
 728        exit(1);
 729    }
 730
 731    possible_cpus = mc->possible_cpu_arch_ids(machine);
 732    for (n = 0; n < possible_cpus->len; n++) {
 733        Object *cpuobj;
 734        CPUState *cs;
 735
 736        if (n >= smp_cpus) {
 737            break;
 738        }
 739
 740        cpuobj = object_new(possible_cpus->cpus[n].type);
 741        object_property_set_int(cpuobj, "mp-affinity",
 742                                possible_cpus->cpus[n].arch_id, NULL);
 743
 744        cs = CPU(cpuobj);
 745        cs->cpu_index = n;
 746
 747        numa_cpu_pre_plug(&possible_cpus->cpus[cs->cpu_index], DEVICE(cpuobj),
 748                          &error_fatal);
 749
 750        if (object_property_find(cpuobj, "reset-cbar")) {
 751            object_property_set_int(cpuobj, "reset-cbar",
 752                                    sbsa_ref_memmap[SBSA_CPUPERIPHS].base,
 753                                    &error_abort);
 754        }
 755
 756        object_property_set_link(cpuobj, "memory", OBJECT(sysmem),
 757                                 &error_abort);
 758
 759        object_property_set_link(cpuobj, "secure-memory",
 760                                 OBJECT(secure_sysmem), &error_abort);
 761
 762        qdev_realize(DEVICE(cpuobj), NULL, &error_fatal);
 763        object_unref(cpuobj);
 764    }
 765
 766    memory_region_add_subregion(sysmem, sbsa_ref_memmap[SBSA_MEM].base,
 767                                machine->ram);
 768
 769    create_fdt(sms);
 770
 771    create_secure_ram(sms, secure_sysmem);
 772
 773    create_gic(sms);
 774
 775    create_uart(sms, SBSA_UART, sysmem, serial_hd(0));
 776    create_uart(sms, SBSA_SECURE_UART, secure_sysmem, serial_hd(1));
 777    /* Second secure UART for RAS and MM from EL0 */
 778    create_uart(sms, SBSA_SECURE_UART_MM, secure_sysmem, serial_hd(2));
 779
 780    create_rtc(sms);
 781
 782    create_wdt(sms);
 783
 784    create_gpio(sms);
 785
 786    create_ahci(sms);
 787
 788    create_ehci(sms);
 789
 790    create_pcie(sms);
 791
 792    create_secure_ec(secure_sysmem);
 793
 794    sms->bootinfo.ram_size = machine->ram_size;
 795    sms->bootinfo.board_id = -1;
 796    sms->bootinfo.loader_start = sbsa_ref_memmap[SBSA_MEM].base;
 797    sms->bootinfo.get_dtb = sbsa_ref_dtb;
 798    sms->bootinfo.firmware_loaded = firmware_loaded;
 799    arm_load_kernel(ARM_CPU(first_cpu), machine, &sms->bootinfo);
 800}
 801
 802static const CPUArchIdList *sbsa_ref_possible_cpu_arch_ids(MachineState *ms)
 803{
 804    unsigned int max_cpus = ms->smp.max_cpus;
 805    SBSAMachineState *sms = SBSA_MACHINE(ms);
 806    int n;
 807
 808    if (ms->possible_cpus) {
 809        assert(ms->possible_cpus->len == max_cpus);
 810        return ms->possible_cpus;
 811    }
 812
 813    ms->possible_cpus = g_malloc0(sizeof(CPUArchIdList) +
 814                                  sizeof(CPUArchId) * max_cpus);
 815    ms->possible_cpus->len = max_cpus;
 816    for (n = 0; n < ms->possible_cpus->len; n++) {
 817        ms->possible_cpus->cpus[n].type = ms->cpu_type;
 818        ms->possible_cpus->cpus[n].arch_id =
 819            sbsa_ref_cpu_mp_affinity(sms, n);
 820        ms->possible_cpus->cpus[n].props.has_thread_id = true;
 821        ms->possible_cpus->cpus[n].props.thread_id = n;
 822    }
 823    return ms->possible_cpus;
 824}
 825
 826static CpuInstanceProperties
 827sbsa_ref_cpu_index_to_props(MachineState *ms, unsigned cpu_index)
 828{
 829    MachineClass *mc = MACHINE_GET_CLASS(ms);
 830    const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids(ms);
 831
 832    assert(cpu_index < possible_cpus->len);
 833    return possible_cpus->cpus[cpu_index].props;
 834}
 835
 836static int64_t
 837sbsa_ref_get_default_cpu_node_id(const MachineState *ms, int idx)
 838{
 839    return idx % ms->numa_state->num_nodes;
 840}
 841
 842static void sbsa_ref_instance_init(Object *obj)
 843{
 844    SBSAMachineState *sms = SBSA_MACHINE(obj);
 845
 846    sbsa_flash_create(sms);
 847}
 848
 849static void sbsa_ref_class_init(ObjectClass *oc, void *data)
 850{
 851    MachineClass *mc = MACHINE_CLASS(oc);
 852
 853    mc->init = sbsa_ref_init;
 854    mc->desc = "QEMU 'SBSA Reference' ARM Virtual Machine";
 855    mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a57");
 856    mc->max_cpus = 512;
 857    mc->pci_allow_0_address = true;
 858    mc->minimum_page_bits = 12;
 859    mc->block_default_type = IF_IDE;
 860    mc->no_cdrom = 1;
 861    mc->default_ram_size = 1 * GiB;
 862    mc->default_ram_id = "sbsa-ref.ram";
 863    mc->default_cpus = 4;
 864    mc->possible_cpu_arch_ids = sbsa_ref_possible_cpu_arch_ids;
 865    mc->cpu_index_to_instance_props = sbsa_ref_cpu_index_to_props;
 866    mc->get_default_cpu_node_id = sbsa_ref_get_default_cpu_node_id;
 867}
 868
 869static const TypeInfo sbsa_ref_info = {
 870    .name          = TYPE_SBSA_MACHINE,
 871    .parent        = TYPE_MACHINE,
 872    .instance_init = sbsa_ref_instance_init,
 873    .class_init    = sbsa_ref_class_init,
 874    .instance_size = sizeof(SBSAMachineState),
 875};
 876
 877static void sbsa_ref_machine_init(void)
 878{
 879    type_register_static(&sbsa_ref_info);
 880}
 881
 882type_init(sbsa_ref_machine_init);
 883