#ifndef QEMU_CUTILS_H
#define QEMU_CUTILS_H

/*
 * si_prefix:
 * @exp10: exponent of 10, a multiple of 3 between -18 and 18 inclusive.
 *
 * Return a SI prefix (n, u, m, K, M, etc.) corresponding
 * to the given exponent of 10.
 */
const char *si_prefix(unsigned int exp10);

/*
 * iec_binary_prefix:
 * @exp2: exponent of 2, a multiple of 10 between 0 and 60 inclusive.
 *
 * Return an IEC binary prefix (Ki, Mi, etc.) corresponding
 * to the given exponent of 2.
 */
const char *iec_binary_prefix(unsigned int exp2);

/**
 * pstrcpy:
 * @buf: buffer to copy string into
 * @buf_size: size of @buf in bytes
 * @str: string to copy
 *
 * Copy @str into @buf, including the trailing NUL, but do not
 * write more than @buf_size bytes. The resulting buffer is
 * always NUL terminated (even if the source string was too long).
 * If @buf_size is zero or negative then no bytes are copied.
 *
 * This function is similar to strncpy(), but avoids two of that
 * function's problems:
 *  * if @str fits in the buffer, pstrcpy() does not zero-fill the
 *    remaining space at the end of @buf
 *  * if @str is too long, pstrcpy() will copy the first @buf_size-1
 *    bytes and then add a NUL
 */
void pstrcpy(char *buf, int buf_size, const char *str);
/**
 * strpadcpy:
 * @buf: buffer to copy string into
 * @buf_size: size of @buf in bytes
 * @str: string to copy
 * @pad: character to pad the remainder of @buf with
 *
 * Copy @str into @buf (but *not* its trailing NUL!), and then pad the
 * rest of the buffer with the @pad character. If @str is too large
 * for the buffer then it is truncated, so that @buf contains the
 * first @buf_size characters of @str, with no terminator.
 */
void strpadcpy(char *buf, int buf_size, const char *str, char pad);
/**
 * pstrcat:
 * @buf: buffer containing existing string
 * @buf_size: size of @buf in bytes
 * @s: string to concatenate to @buf
 *
 * Append a copy of @s to the string already in @buf, but do not
 * allow the buffer to overflow. If the existing contents of @buf
 * plus @str would total more than @buf_size bytes, then write
 * as much of @str as will fit followed by a NUL terminator.
 *
 * @buf must already contain a NUL-terminated string, or the
 * behaviour is undefined.
 *
 * Returns: @buf.
 */
char *pstrcat(char *buf, int buf_size, const char *s);
/**
 * strstart:
 * @str: string to test
 * @val: prefix string to look for
 * @ptr: NULL, or pointer to be written to indicate start of
 *       the remainder of the string
 *
 * Test whether @str starts with the prefix @val.
 * If it does (including the degenerate case where @str and @val
 * are equal) then return true. If @ptr is not NULL then a
 * pointer to the first character following the prefix is written
 * to it. If @val is not a prefix of @str then return false (and
 * @ptr is not written to).
 *
 * Returns: true if @str starts with prefix @val, false otherwise.
 */
int strstart(const char *str, const char *val, const char **ptr);
/**
 * stristart:
 * @str: string to test
 * @val: prefix string to look for
 * @ptr: NULL, or pointer to be written to indicate start of
 *       the remainder of the string
 *
 * Test whether @str starts with the case-insensitive prefix @val.
 * This function behaves identically to strstart(), except that the
 * comparison is made after calling qemu_toupper() on each pair of
 * characters.
 *
 * Returns: true if @str starts with case-insensitive prefix @val,
 *          false otherwise.
 */
int stristart(const char *str, const char *val, const char **ptr);
/**
 * qemu_strnlen:
 * @s: string
 * @max_len: maximum number of bytes in @s to scan
 *
 * Return the length of the string @s, like strlen(), but do not
 * examine more than @max_len bytes of the memory pointed to by @s.
 * If no NUL terminator is found within @max_len bytes, then return
 * @max_len instead.
 *
 * This function has the same behaviour as the POSIX strnlen()
 * function.
 *
 * Returns: length of @s in bytes, or @max_len, whichever is smaller.
 */
int qemu_strnlen(const char *s, int max_len);
/**
 * qemu_strsep:
 * @input: pointer to string to parse
 * @delim: string containing delimiter characters to search for
 *
 * Locate the first occurrence of any character in @delim within
 * the string referenced by @input, and replace it with a NUL.
 * The location of the next character after the delimiter character
 * is stored into @input.
 * If the end of the string was reached without finding a delimiter
 * character, then NULL is stored into @input.
 * If @input points to a NULL pointer on entry, return NULL.
 * The return value is always the original value of *@input (and
 * so now points to a NUL-terminated string corresponding to the
 * part of the input up to the first delimiter).
 *
 * This function has the same behaviour as the BSD strsep() function.
 *
 * Returns: the pointer originally in @input.
 */
char *qemu_strsep(char **input, const char *delim);
#ifdef HAVE_STRCHRNUL
static inline const char *qemu_strchrnul(const char *s, int c)
{
    return strchrnul(s, c);
}
#else
const char *qemu_strchrnul(const char *s, int c);
#endif
time_t mktimegm(struct tm *tm);
int qemu_parse_fd(const char *param);
int qemu_strtoi(const char *nptr, const char **endptr, int base,
                int *result);
int qemu_strtoui(const char *nptr, const char **endptr, int base,
                 unsigned int *result);
int qemu_strtol(const char *nptr, const char **endptr, int base,
                long *result);
int qemu_strtoul(const char *nptr, const char **endptr, int base,
                 unsigned long *result);
int qemu_strtoi64(const char *nptr, const char **endptr, int base,
                  int64_t *result);
int qemu_strtou64(const char *nptr, const char **endptr, int base,
                  uint64_t *result);
int qemu_strtod(const char *nptr, const char **endptr, double *result);
int qemu_strtod_finite(const char *nptr, const char **endptr, double *result);

int parse_uint(const char *s, unsigned long long *value, char **endptr,
               int base);
int parse_uint_full(const char *s, unsigned long long *value, int base);

int qemu_strtosz(const char *nptr, const char **end, uint64_t *result);
int qemu_strtosz_MiB(const char *nptr, const char **end, uint64_t *result);
int qemu_strtosz_metric(const char *nptr, const char **end, uint64_t *result);

char *size_to_str(uint64_t val);

/**
 * freq_to_str:
 * @freq_hz: frequency to stringify
 *
 * Return human readable string for frequency @freq_hz.
 * Use SI units like KHz, MHz, and so forth.
 *
 * The caller is responsible for releasing the value returned
 * with g_free() after use.
 */
char *freq_to_str(uint64_t freq_hz);

/* used to print char* safely */
#define STR_OR_NULL(str) ((str) ? (str) : "null")

bool buffer_is_zero(const void *buf, size_t len);
bool test_buffer_is_zero_next_accel(void);

/*
 * Implementation of ULEB128 (http://en.wikipedia.org/wiki/LEB128)
 * Input is limited to 14-bit numbers
 */

int uleb128_encode_small(uint8_t *out, uint32_t n);
int uleb128_decode_small(const uint8_t *in, uint32_t *n);

/**
 * qemu_pstrcmp0:
 * @str1: a non-NULL pointer to a C string (*str1 can be NULL)
 * @str2: a non-NULL pointer to a C string (*str2 can be NULL)
 *
 * Compares *str1 and *str2 with g_strcmp0().
 *
 * Returns: an integer less than, equal to, or greater than zero, if
 * *str1 is <, == or > than *str2.
 */
int qemu_pstrcmp0(const char **str1, const char **str2);

/* Find program directory, and save it for later usage with
 * qemu_get_exec_dir().
 * Try OS specific API first, if not working, parse from argv0. */
void qemu_init_exec_dir(const char *argv0);

/* Get the saved exec dir.  */
const char *qemu_get_exec_dir(void);

/**
 * get_relocated_path:
 * @dir: the directory (typically a `CONFIG_*DIR` variable) to be relocated.
 *
 * Returns a path for @dir that uses the directory of the running executable
 * as the prefix.
 *
 * When a directory named `qemu-bundle` exists in the directory of the running
 * executable, the path to the directory will be prepended to @dir. For
 * example, if the directory of the running executable is `/qemu/build` @dir
 * is `/usr/share/qemu`, the result will be
 * `/qemu/build/qemu-bundle/usr/share/qemu`. The directory is expected to exist
 * in the build tree.
 *
 * Otherwise, the directory of the running executable will be used as the
 * prefix and it appends the relative path from `bindir` to @dir. For example,
 * if the directory of the running executable is `/opt/qemu/bin`, `bindir` is
 * `/usr/bin` and @dir is `/usr/share/qemu`, the result will be
 * `/opt/qemu/bin/../share/qemu`.
 *
 * The returned string should be freed by the caller.
 */
char *get_relocated_path(const char *dir);

static inline const char *yes_no(bool b)
{
     return b ? "yes" : "no";
}

/*
 * helper to parse debug environment variables
 */
int parse_debug_env(const char *name, int max, int initial);

/*
 * Hexdump a line of a byte buffer into a hexadecimal/ASCII buffer
 */
#define QEMU_HEXDUMP_LINE_BYTES 16 /* Number of bytes to dump */
#define QEMU_HEXDUMP_LINE_LEN 75   /* Number of characters in line */
void qemu_hexdump_line(char *line, unsigned int b, const void *bufptr,
                       unsigned int len, bool ascii);

/*
 * Hexdump a buffer to a file. An optional string prefix is added to every line
 */

void qemu_hexdump(FILE *fp, const char *prefix,
                  const void *bufptr, size_t size);

#endif