1
2
3
4
5
6
7
8
9
10
11
12#include "s390-ccw.h"
13#include "virtio.h"
14#include "scsi.h"
15#include "virtio-scsi.h"
16
17static ScsiDevice default_scsi_device;
18static VirtioScsiCmdReq req;
19static VirtioScsiCmdResp resp;
20
21static uint8_t scsi_inquiry_std_response[256];
22
23static inline void vs_assert(bool term, const char **msgs)
24{
25 if (!term) {
26 int i = 0;
27
28 sclp_print("\n! ");
29 while (msgs[i]) {
30 sclp_print(msgs[i++]);
31 }
32 panic(" !\n");
33 }
34}
35
36static void virtio_scsi_verify_response(VirtioScsiCmdResp *resp,
37 const char *title)
38{
39 const char *mr[] = {
40 title, ": response ", virtio_scsi_response_msg(resp), 0
41 };
42 const char *ms[] = {
43 title,
44 CDB_STATUS_VALID(resp->status) ? ": " : ": invalid ",
45 scsi_cdb_status_msg(resp->status),
46 resp->status == CDB_STATUS_CHECK_CONDITION ? " " : 0,
47 resp->sense_len ? scsi_cdb_asc_msg(resp->sense)
48 : "no sense data",
49 scsi_sense_response(resp->sense) == 0x70 ? ", sure" : "?",
50 0
51 };
52
53 vs_assert(resp->response == VIRTIO_SCSI_S_OK, mr);
54 vs_assert(resp->status == CDB_STATUS_GOOD, ms);
55}
56
57static void prepare_request(VDev *vdev, const void *cdb, int cdb_size,
58 void *data, uint32_t data_size)
59{
60 const ScsiDevice *sdev = vdev->scsi_device;
61
62 memset(&req, 0, sizeof(req));
63 req.lun = make_lun(sdev->channel, sdev->target, sdev->lun);
64 memcpy(&req.cdb, cdb, cdb_size);
65
66 memset(&resp, 0, sizeof(resp));
67 resp.status = 0xff;
68 resp.response = 0xff;
69
70 if (data && data_size) {
71 memset(data, 0, data_size);
72 }
73}
74
75static inline void vs_io_assert(bool term, const char *msg)
76{
77 if (!term) {
78 virtio_scsi_verify_response(&resp, msg);
79 }
80}
81
82static void vs_run(const char *title, VirtioCmd *cmd, VDev *vdev,
83 const void *cdb, int cdb_size,
84 void *data, uint32_t data_size)
85{
86 prepare_request(vdev, cdb, cdb_size, data, data_size);
87 vs_io_assert(virtio_run(vdev, VR_REQUEST, cmd) == 0, title);
88}
89
90
91
92static bool scsi_inquiry(VDev *vdev, void *data, uint32_t data_size)
93{
94 ScsiCdbInquiry cdb = {
95 .command = 0x12,
96 .alloc_len = data_size < 65535 ? data_size : 65535,
97 };
98 VirtioCmd inquiry[] = {
99 { &req, sizeof(req), VRING_DESC_F_NEXT },
100 { &resp, sizeof(resp), VRING_DESC_F_WRITE | VRING_DESC_F_NEXT },
101 { data, data_size, VRING_DESC_F_WRITE },
102 };
103
104 vs_run("inquiry", inquiry, vdev, &cdb, sizeof(cdb), data, data_size);
105
106 return virtio_scsi_response_ok(&resp);
107}
108
109static bool scsi_test_unit_ready(VDev *vdev)
110{
111 ScsiCdbTestUnitReady cdb = {
112 .command = 0x00,
113 };
114 VirtioCmd test_unit_ready[] = {
115 { &req, sizeof(req), VRING_DESC_F_NEXT },
116 { &resp, sizeof(resp), VRING_DESC_F_WRITE },
117 };
118
119 prepare_request(vdev, &cdb, sizeof(cdb), 0, 0);
120 virtio_run(vdev, VR_REQUEST, test_unit_ready);
121
122 return virtio_scsi_response_ok(&resp);
123}
124
125static bool scsi_report_luns(VDev *vdev, void *data, uint32_t data_size)
126{
127 ScsiCdbReportLuns cdb = {
128 .command = 0xa0,
129 .select_report = 0x02,
130 .alloc_len = data_size,
131 };
132 VirtioCmd report_luns[] = {
133 { &req, sizeof(req), VRING_DESC_F_NEXT },
134 { &resp, sizeof(resp), VRING_DESC_F_WRITE | VRING_DESC_F_NEXT },
135 { data, data_size, VRING_DESC_F_WRITE },
136 };
137
138 vs_run("report luns", report_luns,
139 vdev, &cdb, sizeof(cdb), data, data_size);
140
141 return virtio_scsi_response_ok(&resp);
142}
143
144static bool scsi_read_10(VDev *vdev,
145 ulong sector, int sectors, void *data)
146{
147 int f = vdev->blk_factor;
148 unsigned int data_size = sectors * virtio_get_block_size() * f;
149 ScsiCdbRead10 cdb = {
150 .command = 0x28,
151 .lba = sector * f,
152 .xfer_length = sectors * f,
153 };
154 VirtioCmd read_10[] = {
155 { &req, sizeof(req), VRING_DESC_F_NEXT },
156 { &resp, sizeof(resp), VRING_DESC_F_WRITE | VRING_DESC_F_NEXT },
157 { data, data_size * f, VRING_DESC_F_WRITE },
158 };
159
160 debug_print_int("read_10 sector", sector);
161 debug_print_int("read_10 sectors", sectors);
162
163 vs_run("read(10)", read_10, vdev, &cdb, sizeof(cdb), data, data_size);
164
165 return virtio_scsi_response_ok(&resp);
166}
167
168static bool scsi_read_capacity(VDev *vdev,
169 void *data, uint32_t data_size)
170{
171 ScsiCdbReadCapacity16 cdb = {
172 .command = 0x9e,
173 .service_action = 0x10,
174 .alloc_len = data_size,
175 };
176 VirtioCmd read_capacity_16[] = {
177 { &req, sizeof(req), VRING_DESC_F_NEXT },
178 { &resp, sizeof(resp), VRING_DESC_F_WRITE | VRING_DESC_F_NEXT },
179 { data, data_size, VRING_DESC_F_WRITE },
180 };
181
182 vs_run("read capacity", read_capacity_16,
183 vdev, &cdb, sizeof(cdb), data, data_size);
184
185 return virtio_scsi_response_ok(&resp);
186}
187
188
189
190static void virtio_scsi_locate_device(VDev *vdev)
191{
192 const uint16_t channel = 0;
193 uint16_t target;
194 static uint8_t data[16 + 8 * 63];
195 ScsiLunReport *r = (void *) data;
196 ScsiDevice *sdev = vdev->scsi_device;
197 int i, luns;
198
199
200
201
202
203 debug_print_int("config.scsi.max_channel", vdev->config.scsi.max_channel);
204 debug_print_int("config.scsi.max_target ", vdev->config.scsi.max_target);
205 debug_print_int("config.scsi.max_lun ", vdev->config.scsi.max_lun);
206
207 for (target = 0; target <= vdev->config.scsi.max_target; target++) {
208 sdev->channel = channel;
209 sdev->target = target;
210 if (!scsi_report_luns(vdev, data, sizeof(data))) {
211 if (resp.response == VIRTIO_SCSI_S_BAD_TARGET) {
212 continue;
213 }
214 print_int("target", target);
215 virtio_scsi_verify_response(&resp, "SCSI cannot report LUNs");
216 }
217 if (r->lun_list_len == 0) {
218 print_int("no LUNs for target", target);
219 continue;
220 }
221 luns = r->lun_list_len / 8;
222 debug_print_int("LUNs reported", luns);
223 if (luns == 1) {
224
225
226
227
228 sdev->lun = r->lun[0].v16[0];
229 debug_print_int("Have to use LUN", sdev->lun);
230 return;
231 }
232 for (i = 0; i < luns; i++) {
233 if (r->lun[i].v64) {
234
235 sdev->lun = r->lun[i].v16[0];
236 debug_print_int("Will use LUN", sdev->lun);
237 return;
238 }
239 }
240 }
241 panic("\n! Cannot locate virtio-scsi device !\n");
242}
243
244int virtio_scsi_read_many(VDev *vdev,
245 ulong sector, void *load_addr, int sec_num)
246{
247 if (!scsi_read_10(vdev, sector, sec_num, load_addr)) {
248 virtio_scsi_verify_response(&resp, "virtio-scsi:read_many");
249 }
250
251 return 0;
252}
253
254static bool virtio_scsi_inquiry_response_is_cdrom(void *data)
255{
256 const ScsiInquiryStd *response = data;
257 const int resp_data_fmt = response->b3 & 0x0f;
258 int i;
259
260 IPL_check(resp_data_fmt == 2, "Wrong INQUIRY response format");
261 if (resp_data_fmt != 2) {
262 return false;
263 }
264
265 if ((response->peripheral_qdt & 0x1f) == SCSI_INQ_RDT_CDROM) {
266 return true;
267 }
268
269 for (i = 0; i < sizeof(response->prod_id); i++) {
270 if (response->prod_id[i] != QEMU_CDROM_SIGNATURE[i]) {
271 return false;
272 }
273 }
274 return true;
275}
276
277static void scsi_parse_capacity_report(void *data,
278 uint64_t *last_lba, uint32_t *lb_len)
279{
280 ScsiReadCapacity16Data *p = data;
281
282 if (last_lba) {
283 *last_lba = p->ret_lba;
284 }
285
286 if (lb_len) {
287 *lb_len = p->lb_len;
288 }
289}
290
291void virtio_scsi_setup(VDev *vdev)
292{
293 int retry_test_unit_ready = 3;
294 uint8_t data[256];
295 uint32_t data_size = sizeof(data);
296
297 vdev->scsi_device = &default_scsi_device;
298 virtio_scsi_locate_device(vdev);
299
300
301 while (!scsi_test_unit_ready(vdev)) {
302
303 if (!virtio_scsi_response_ok(&resp)) {
304 uint8_t code = resp.sense[0] & SCSI_SENSE_CODE_MASK;
305 uint8_t sense_key = resp.sense[2] & SCSI_SENSE_KEY_MASK;
306
307 IPL_assert(resp.sense_len != 0, "virtio-scsi:setup: no SENSE data");
308
309 IPL_assert(retry_test_unit_ready && code == 0x70 &&
310 sense_key == SCSI_SENSE_KEY_UNIT_ATTENTION,
311 "virtio-scsi:setup: cannot retry");
312
313
314
315
316
317 retry_test_unit_ready--;
318 sleep(1);
319 continue;
320 }
321
322 virtio_scsi_verify_response(&resp, "virtio-scsi:setup");
323 }
324
325
326 if (!scsi_inquiry(vdev, scsi_inquiry_std_response,
327 sizeof(scsi_inquiry_std_response))) {
328 virtio_scsi_verify_response(&resp, "virtio-scsi:setup:inquiry");
329 }
330
331 if (virtio_scsi_inquiry_response_is_cdrom(scsi_inquiry_std_response)) {
332 sclp_print("SCSI CD-ROM detected.\n");
333 vdev->is_cdrom = true;
334 vdev->scsi_block_size = VIRTIO_ISO_BLOCK_SIZE;
335 }
336
337 if (!scsi_read_capacity(vdev, data, data_size)) {
338 virtio_scsi_verify_response(&resp, "virtio-scsi:setup:read_capacity");
339 }
340 scsi_parse_capacity_report(data, &vdev->scsi_last_block,
341 (uint32_t *) &vdev->scsi_block_size);
342}
343