qemu/hw/ide/atapi.c
<<
>>
Prefs
   1/*
   2 * QEMU ATAPI Emulation
   3 *
   4 * Copyright (c) 2003 Fabrice Bellard
   5 * Copyright (c) 2006 Openedhand Ltd.
   6 *
   7 * Permission is hereby granted, free of charge, to any person obtaining a copy
   8 * of this software and associated documentation files (the "Software"), to deal
   9 * in the Software without restriction, including without limitation the rights
  10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11 * copies of the Software, and to permit persons to whom the Software is
  12 * furnished to do so, subject to the following conditions:
  13 *
  14 * The above copyright notice and this permission notice shall be included in
  15 * all copies or substantial portions of the Software.
  16 *
  17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23 * THE SOFTWARE.
  24 */
  25
  26#include "qemu/osdep.h"
  27#include "hw/ide/internal.h"
  28#include "hw/scsi/scsi.h"
  29#include "sysemu/block-backend.h"
  30#include "trace.h"
  31
  32#define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS)
  33#define ATAPI_SECTOR_SIZE (1 << ATAPI_SECTOR_BITS)
  34
  35static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret);
  36
  37static void padstr8(uint8_t *buf, int buf_size, const char *src)
  38{
  39    int i;
  40    for(i = 0; i < buf_size; i++) {
  41        if (*src)
  42            buf[i] = *src++;
  43        else
  44            buf[i] = ' ';
  45    }
  46}
  47
  48static void lba_to_msf(uint8_t *buf, int lba)
  49{
  50    lba += 150;
  51    buf[0] = (lba / 75) / 60;
  52    buf[1] = (lba / 75) % 60;
  53    buf[2] = lba % 75;
  54}
  55
  56static inline int media_present(IDEState *s)
  57{
  58    return !s->tray_open && s->nb_sectors > 0;
  59}
  60
  61/* XXX: DVDs that could fit on a CD will be reported as a CD */
  62static inline int media_is_dvd(IDEState *s)
  63{
  64    return (media_present(s) && s->nb_sectors > CD_MAX_SECTORS);
  65}
  66
  67static inline int media_is_cd(IDEState *s)
  68{
  69    return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS);
  70}
  71
  72static void cd_data_to_raw(uint8_t *buf, int lba)
  73{
  74    /* sync bytes */
  75    buf[0] = 0x00;
  76    memset(buf + 1, 0xff, 10);
  77    buf[11] = 0x00;
  78    buf += 12;
  79    /* MSF */
  80    lba_to_msf(buf, lba);
  81    buf[3] = 0x01; /* mode 1 data */
  82    buf += 4;
  83    /* data */
  84    buf += 2048;
  85    /* XXX: ECC not computed */
  86    memset(buf, 0, 288);
  87}
  88
  89static int
  90cd_read_sector_sync(IDEState *s)
  91{
  92    int ret;
  93    block_acct_start(blk_get_stats(s->blk), &s->acct,
  94                     ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
  95
  96    trace_cd_read_sector_sync(s->lba);
  97
  98    switch (s->cd_sector_size) {
  99    case 2048:
 100        ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS,
 101                        s->io_buffer, ATAPI_SECTOR_SIZE);
 102        break;
 103    case 2352:
 104        ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS,
 105                        s->io_buffer + 16, ATAPI_SECTOR_SIZE);
 106        if (ret >= 0) {
 107            cd_data_to_raw(s->io_buffer, s->lba);
 108        }
 109        break;
 110    default:
 111        block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
 112        return -EIO;
 113    }
 114
 115    if (ret < 0) {
 116        block_acct_failed(blk_get_stats(s->blk), &s->acct);
 117    } else {
 118        block_acct_done(blk_get_stats(s->blk), &s->acct);
 119        s->lba++;
 120        s->io_buffer_index = 0;
 121    }
 122
 123    return ret;
 124}
 125
 126static void cd_read_sector_cb(void *opaque, int ret)
 127{
 128    IDEState *s = opaque;
 129
 130    trace_cd_read_sector_cb(s->lba, ret);
 131
 132    if (ret < 0) {
 133        block_acct_failed(blk_get_stats(s->blk), &s->acct);
 134        ide_atapi_io_error(s, ret);
 135        return;
 136    }
 137
 138    block_acct_done(blk_get_stats(s->blk), &s->acct);
 139
 140    if (s->cd_sector_size == 2352) {
 141        cd_data_to_raw(s->io_buffer, s->lba);
 142    }
 143
 144    s->lba++;
 145    s->io_buffer_index = 0;
 146    s->status &= ~BUSY_STAT;
 147
 148    ide_atapi_cmd_reply_end(s);
 149}
 150
 151static int cd_read_sector(IDEState *s)
 152{
 153    void *buf;
 154
 155    if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) {
 156        block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
 157        return -EINVAL;
 158    }
 159
 160    buf = (s->cd_sector_size == 2352) ? s->io_buffer + 16 : s->io_buffer;
 161    qemu_iovec_init_buf(&s->qiov, buf, ATAPI_SECTOR_SIZE);
 162
 163    trace_cd_read_sector(s->lba);
 164
 165    block_acct_start(blk_get_stats(s->blk), &s->acct,
 166                     ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
 167
 168    ide_buffered_readv(s, (int64_t)s->lba << 2, &s->qiov, 4,
 169                       cd_read_sector_cb, s);
 170
 171    s->status |= BUSY_STAT;
 172    return 0;
 173}
 174
 175void ide_atapi_cmd_ok(IDEState *s)
 176{
 177    s->error = 0;
 178    s->status = READY_STAT | SEEK_STAT;
 179    s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
 180    ide_transfer_stop(s);
 181    ide_set_irq(s->bus);
 182}
 183
 184void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc)
 185{
 186    trace_ide_atapi_cmd_error(s, sense_key, asc);
 187    s->error = sense_key << 4;
 188    s->status = READY_STAT | ERR_STAT;
 189    s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
 190    s->sense_key = sense_key;
 191    s->asc = asc;
 192    ide_transfer_stop(s);
 193    ide_set_irq(s->bus);
 194}
 195
 196void ide_atapi_io_error(IDEState *s, int ret)
 197{
 198    /* XXX: handle more errors */
 199    if (ret == -ENOMEDIUM) {
 200        ide_atapi_cmd_error(s, NOT_READY,
 201                            ASC_MEDIUM_NOT_PRESENT);
 202    } else {
 203        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 204                            ASC_LOGICAL_BLOCK_OOR);
 205    }
 206}
 207
 208static uint16_t atapi_byte_count_limit(IDEState *s)
 209{
 210    uint16_t bcl;
 211
 212    bcl = s->lcyl | (s->hcyl << 8);
 213    if (bcl == 0xffff) {
 214        return 0xfffe;
 215    }
 216    return bcl;
 217}
 218
 219/* The whole ATAPI transfer logic is handled in this function */
 220void ide_atapi_cmd_reply_end(IDEState *s)
 221{
 222    int byte_count_limit, size, ret;
 223    while (s->packet_transfer_size > 0) {
 224        trace_ide_atapi_cmd_reply_end(s, s->packet_transfer_size,
 225                                      s->elementary_transfer_size,
 226                                      s->io_buffer_index);
 227
 228        /* see if a new sector must be read */
 229        if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) {
 230            if (!s->elementary_transfer_size) {
 231                ret = cd_read_sector(s);
 232                if (ret < 0) {
 233                    ide_atapi_io_error(s, ret);
 234                }
 235                return;
 236            } else {
 237                /* rebuffering within an elementary transfer is
 238                 * only possible with a sync request because we
 239                 * end up with a race condition otherwise */
 240                ret = cd_read_sector_sync(s);
 241                if (ret < 0) {
 242                    ide_atapi_io_error(s, ret);
 243                    return;
 244                }
 245            }
 246        }
 247        if (s->elementary_transfer_size > 0) {
 248            /* there are some data left to transmit in this elementary
 249               transfer */
 250            size = s->cd_sector_size - s->io_buffer_index;
 251            if (size > s->elementary_transfer_size)
 252                size = s->elementary_transfer_size;
 253        } else {
 254            /* a new transfer is needed */
 255            s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO;
 256            ide_set_irq(s->bus);
 257            byte_count_limit = atapi_byte_count_limit(s);
 258            trace_ide_atapi_cmd_reply_end_bcl(s, byte_count_limit);
 259            size = s->packet_transfer_size;
 260            if (size > byte_count_limit) {
 261                /* byte count limit must be even if this case */
 262                if (byte_count_limit & 1)
 263                    byte_count_limit--;
 264                size = byte_count_limit;
 265            }
 266            s->lcyl = size;
 267            s->hcyl = size >> 8;
 268            s->elementary_transfer_size = size;
 269            /* we cannot transmit more than one sector at a time */
 270            if (s->lba != -1) {
 271                if (size > (s->cd_sector_size - s->io_buffer_index))
 272                    size = (s->cd_sector_size - s->io_buffer_index);
 273            }
 274            trace_ide_atapi_cmd_reply_end_new(s, s->status);
 275        }
 276        s->packet_transfer_size -= size;
 277        s->elementary_transfer_size -= size;
 278        s->io_buffer_index += size;
 279        assert(size <= s->io_buffer_total_len);
 280        assert(s->io_buffer_index <= s->io_buffer_total_len);
 281
 282        /* Some adapters process PIO data right away.  In that case, we need
 283         * to avoid mutual recursion between ide_transfer_start
 284         * and ide_atapi_cmd_reply_end.
 285         */
 286        if (!ide_transfer_start_norecurse(s,
 287                                          s->io_buffer + s->io_buffer_index - size,
 288                                          size, ide_atapi_cmd_reply_end)) {
 289            return;
 290        }
 291    }
 292
 293    /* end of transfer */
 294    trace_ide_atapi_cmd_reply_end_eot(s, s->status);
 295    ide_atapi_cmd_ok(s);
 296    ide_set_irq(s->bus);
 297}
 298
 299/* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */
 300static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size)
 301{
 302    if (size > max_size)
 303        size = max_size;
 304    s->lba = -1; /* no sector read */
 305    s->packet_transfer_size = size;
 306    s->io_buffer_size = size;    /* dma: send the reply data as one chunk */
 307    s->elementary_transfer_size = 0;
 308
 309    if (s->atapi_dma) {
 310        block_acct_start(blk_get_stats(s->blk), &s->acct, size,
 311                         BLOCK_ACCT_READ);
 312        s->status = READY_STAT | SEEK_STAT | DRQ_STAT;
 313        ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
 314    } else {
 315        s->status = READY_STAT | SEEK_STAT;
 316        s->io_buffer_index = 0;
 317        ide_atapi_cmd_reply_end(s);
 318    }
 319}
 320
 321/* start a CD-CDROM read command */
 322static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors,
 323                                   int sector_size)
 324{
 325    assert(0 <= lba && lba < (s->nb_sectors >> 2));
 326
 327    s->lba = lba;
 328    s->packet_transfer_size = nb_sectors * sector_size;
 329    s->elementary_transfer_size = 0;
 330    s->io_buffer_index = sector_size;
 331    s->cd_sector_size = sector_size;
 332
 333    ide_atapi_cmd_reply_end(s);
 334}
 335
 336static void ide_atapi_cmd_check_status(IDEState *s)
 337{
 338    trace_ide_atapi_cmd_check_status(s);
 339    s->error = MC_ERR | (UNIT_ATTENTION << 4);
 340    s->status = ERR_STAT;
 341    s->nsector = 0;
 342    ide_set_irq(s->bus);
 343}
 344/* ATAPI DMA support */
 345
 346static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret)
 347{
 348    IDEState *s = opaque;
 349    int data_offset, n;
 350
 351    if (ret < 0) {
 352        if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) {
 353            if (s->bus->error_status) {
 354                s->bus->dma->aiocb = NULL;
 355                return;
 356            }
 357            goto eot;
 358        }
 359    }
 360
 361    if (s->io_buffer_size > 0) {
 362        /*
 363         * For a cdrom read sector command (s->lba != -1),
 364         * adjust the lba for the next s->io_buffer_size chunk
 365         * and dma the current chunk.
 366         * For a command != read (s->lba == -1), just transfer
 367         * the reply data.
 368         */
 369        if (s->lba != -1) {
 370            if (s->cd_sector_size == 2352) {
 371                n = 1;
 372                cd_data_to_raw(s->io_buffer, s->lba);
 373            } else {
 374                n = s->io_buffer_size >> 11;
 375            }
 376            s->lba += n;
 377        }
 378        s->packet_transfer_size -= s->io_buffer_size;
 379        if (s->bus->dma->ops->rw_buf(s->bus->dma, 1) == 0)
 380            goto eot;
 381    }
 382
 383    if (s->packet_transfer_size <= 0) {
 384        s->status = READY_STAT | SEEK_STAT;
 385        s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
 386        ide_set_irq(s->bus);
 387        goto eot;
 388    }
 389
 390    s->io_buffer_index = 0;
 391    if (s->cd_sector_size == 2352) {
 392        n = 1;
 393        s->io_buffer_size = s->cd_sector_size;
 394        data_offset = 16;
 395    } else {
 396        n = s->packet_transfer_size >> 11;
 397        if (n > (IDE_DMA_BUF_SECTORS / 4))
 398            n = (IDE_DMA_BUF_SECTORS / 4);
 399        s->io_buffer_size = n * 2048;
 400        data_offset = 0;
 401    }
 402    trace_ide_atapi_cmd_read_dma_cb_aio(s, s->lba, n);
 403    qemu_iovec_init_buf(&s->bus->dma->qiov, s->io_buffer + data_offset,
 404                        n * ATAPI_SECTOR_SIZE);
 405
 406    s->bus->dma->aiocb = ide_buffered_readv(s, (int64_t)s->lba << 2,
 407                                            &s->bus->dma->qiov, n * 4,
 408                                            ide_atapi_cmd_read_dma_cb, s);
 409    return;
 410
 411eot:
 412    if (ret < 0) {
 413        block_acct_failed(blk_get_stats(s->blk), &s->acct);
 414    } else {
 415        block_acct_done(blk_get_stats(s->blk), &s->acct);
 416    }
 417    ide_set_inactive(s, false);
 418}
 419
 420/* start a CD-CDROM read command with DMA */
 421/* XXX: test if DMA is available */
 422static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors,
 423                                   int sector_size)
 424{
 425    assert(0 <= lba && lba < (s->nb_sectors >> 2));
 426
 427    s->lba = lba;
 428    s->packet_transfer_size = nb_sectors * sector_size;
 429    s->io_buffer_size = 0;
 430    s->cd_sector_size = sector_size;
 431
 432    block_acct_start(blk_get_stats(s->blk), &s->acct, s->packet_transfer_size,
 433                     BLOCK_ACCT_READ);
 434
 435    /* XXX: check if BUSY_STAT should be set */
 436    s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT;
 437    ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
 438}
 439
 440static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors,
 441                               int sector_size)
 442{
 443    trace_ide_atapi_cmd_read(s, s->atapi_dma ? "dma" : "pio",
 444                             lba, nb_sectors);
 445    if (s->atapi_dma) {
 446        ide_atapi_cmd_read_dma(s, lba, nb_sectors, sector_size);
 447    } else {
 448        ide_atapi_cmd_read_pio(s, lba, nb_sectors, sector_size);
 449    }
 450}
 451
 452void ide_atapi_dma_restart(IDEState *s)
 453{
 454    /*
 455     * At this point we can just re-evaluate the packet command and start over.
 456     * The presence of ->dma_cb callback in the pre_save ensures that the packet
 457     * command has been completely sent and we can safely restart command.
 458     */
 459    s->unit = s->bus->retry_unit;
 460    s->bus->dma->ops->restart_dma(s->bus->dma);
 461    ide_atapi_cmd(s);
 462}
 463
 464static inline uint8_t ide_atapi_set_profile(uint8_t *buf, uint8_t *index,
 465                                            uint16_t profile)
 466{
 467    uint8_t *buf_profile = buf + 12; /* start of profiles */
 468
 469    buf_profile += ((*index) * 4); /* start of indexed profile */
 470    stw_be_p(buf_profile, profile);
 471    buf_profile[2] = ((buf_profile[0] == buf[6]) && (buf_profile[1] == buf[7]));
 472
 473    /* each profile adds 4 bytes to the response */
 474    (*index)++;
 475    buf[11] += 4; /* Additional Length */
 476
 477    return 4;
 478}
 479
 480static int ide_dvd_read_structure(IDEState *s, int format,
 481                                  const uint8_t *packet, uint8_t *buf)
 482{
 483    switch (format) {
 484        case 0x0: /* Physical format information */
 485            {
 486                int layer = packet[6];
 487                uint64_t total_sectors;
 488
 489                if (layer != 0)
 490                    return -ASC_INV_FIELD_IN_CMD_PACKET;
 491
 492                total_sectors = s->nb_sectors >> 2;
 493                if (total_sectors == 0) {
 494                    return -ASC_MEDIUM_NOT_PRESENT;
 495                }
 496
 497                buf[4] = 1;   /* DVD-ROM, part version 1 */
 498                buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
 499                buf[6] = 1;   /* one layer, read-only (per MMC-2 spec) */
 500                buf[7] = 0;   /* default densities */
 501
 502                /* FIXME: 0x30000 per spec? */
 503                stl_be_p(buf + 8, 0); /* start sector */
 504                stl_be_p(buf + 12, total_sectors - 1); /* end sector */
 505                stl_be_p(buf + 16, total_sectors - 1); /* l0 end sector */
 506
 507                /* Size of buffer, not including 2 byte size field */
 508                stw_be_p(buf, 2048 + 2);
 509
 510                /* 2k data + 4 byte header */
 511                return (2048 + 4);
 512            }
 513
 514        case 0x01: /* DVD copyright information */
 515            buf[4] = 0; /* no copyright data */
 516            buf[5] = 0; /* no region restrictions */
 517
 518            /* Size of buffer, not including 2 byte size field */
 519            stw_be_p(buf, 4 + 2);
 520
 521            /* 4 byte header + 4 byte data */
 522            return (4 + 4);
 523
 524        case 0x03: /* BCA information - invalid field for no BCA info */
 525            return -ASC_INV_FIELD_IN_CMD_PACKET;
 526
 527        case 0x04: /* DVD disc manufacturing information */
 528            /* Size of buffer, not including 2 byte size field */
 529            stw_be_p(buf, 2048 + 2);
 530
 531            /* 2k data + 4 byte header */
 532            return (2048 + 4);
 533
 534        case 0xff:
 535            /*
 536             * This lists all the command capabilities above.  Add new ones
 537             * in order and update the length and buffer return values.
 538             */
 539
 540            buf[4] = 0x00; /* Physical format */
 541            buf[5] = 0x40; /* Not writable, is readable */
 542            stw_be_p(buf + 6, 2048 + 4);
 543
 544            buf[8] = 0x01; /* Copyright info */
 545            buf[9] = 0x40; /* Not writable, is readable */
 546            stw_be_p(buf + 10, 4 + 4);
 547
 548            buf[12] = 0x03; /* BCA info */
 549            buf[13] = 0x40; /* Not writable, is readable */
 550            stw_be_p(buf + 14, 188 + 4);
 551
 552            buf[16] = 0x04; /* Manufacturing info */
 553            buf[17] = 0x40; /* Not writable, is readable */
 554            stw_be_p(buf + 18, 2048 + 4);
 555
 556            /* Size of buffer, not including 2 byte size field */
 557            stw_be_p(buf, 16 + 2);
 558
 559            /* data written + 4 byte header */
 560            return (16 + 4);
 561
 562        default: /* TODO: formats beyond DVD-ROM requires */
 563            return -ASC_INV_FIELD_IN_CMD_PACKET;
 564    }
 565}
 566
 567static unsigned int event_status_media(IDEState *s,
 568                                       uint8_t *buf)
 569{
 570    uint8_t event_code, media_status;
 571
 572    media_status = 0;
 573    if (s->tray_open) {
 574        media_status = MS_TRAY_OPEN;
 575    } else if (blk_is_inserted(s->blk)) {
 576        media_status = MS_MEDIA_PRESENT;
 577    }
 578
 579    /* Event notification descriptor */
 580    event_code = MEC_NO_CHANGE;
 581    if (media_status != MS_TRAY_OPEN) {
 582        if (s->events.new_media) {
 583            event_code = MEC_NEW_MEDIA;
 584            s->events.new_media = false;
 585        } else if (s->events.eject_request) {
 586            event_code = MEC_EJECT_REQUESTED;
 587            s->events.eject_request = false;
 588        }
 589    }
 590
 591    buf[4] = event_code;
 592    buf[5] = media_status;
 593
 594    /* These fields are reserved, just clear them. */
 595    buf[6] = 0;
 596    buf[7] = 0;
 597
 598    return 8; /* We wrote to 4 extra bytes from the header */
 599}
 600
 601/*
 602 * Before transferring data or otherwise signalling acceptance of a command
 603 * marked CONDDATA, we must check the validity of the byte_count_limit.
 604 */
 605static bool validate_bcl(IDEState *s)
 606{
 607    /* TODO: Check IDENTIFY data word 125 for defacult BCL (currently 0) */
 608    if (s->atapi_dma || atapi_byte_count_limit(s)) {
 609        return true;
 610    }
 611
 612    /* TODO: Move abort back into core.c and introduce proper error flow between
 613     *       ATAPI layer and IDE core layer */
 614    ide_abort_command(s);
 615    return false;
 616}
 617
 618static void cmd_get_event_status_notification(IDEState *s,
 619                                              uint8_t *buf)
 620{
 621    const uint8_t *packet = buf;
 622
 623    struct {
 624        uint8_t opcode;
 625        uint8_t polled;        /* lsb bit is polled; others are reserved */
 626        uint8_t reserved2[2];
 627        uint8_t class;
 628        uint8_t reserved3[2];
 629        uint16_t len;
 630        uint8_t control;
 631    } QEMU_PACKED *gesn_cdb;
 632
 633    struct {
 634        uint16_t len;
 635        uint8_t notification_class;
 636        uint8_t supported_events;
 637    } QEMU_PACKED *gesn_event_header;
 638    unsigned int max_len, used_len;
 639
 640    gesn_cdb = (void *)packet;
 641    gesn_event_header = (void *)buf;
 642
 643    max_len = be16_to_cpu(gesn_cdb->len);
 644
 645    /* It is fine by the MMC spec to not support async mode operations */
 646    if (!(gesn_cdb->polled & 0x01)) { /* asynchronous mode */
 647        /* Only polling is supported, asynchronous mode is not. */
 648        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 649                            ASC_INV_FIELD_IN_CMD_PACKET);
 650        return;
 651    }
 652
 653    /* polling mode operation */
 654
 655    /*
 656     * These are the supported events.
 657     *
 658     * We currently only support requests of the 'media' type.
 659     * Notification class requests and supported event classes are bitmasks,
 660     * but they are build from the same values as the "notification class"
 661     * field.
 662     */
 663    gesn_event_header->supported_events = 1 << GESN_MEDIA;
 664
 665    /*
 666     * We use |= below to set the class field; other bits in this byte
 667     * are reserved now but this is useful to do if we have to use the
 668     * reserved fields later.
 669     */
 670    gesn_event_header->notification_class = 0;
 671
 672    /*
 673     * Responses to requests are to be based on request priority.  The
 674     * notification_class_request_type enum above specifies the
 675     * priority: upper elements are higher prio than lower ones.
 676     */
 677    if (gesn_cdb->class & (1 << GESN_MEDIA)) {
 678        gesn_event_header->notification_class |= GESN_MEDIA;
 679        used_len = event_status_media(s, buf);
 680    } else {
 681        gesn_event_header->notification_class = 0x80; /* No event available */
 682        used_len = sizeof(*gesn_event_header);
 683    }
 684    gesn_event_header->len = cpu_to_be16(used_len
 685                                         - sizeof(*gesn_event_header));
 686    ide_atapi_cmd_reply(s, used_len, max_len);
 687}
 688
 689static void cmd_request_sense(IDEState *s, uint8_t *buf)
 690{
 691    int max_len = buf[4];
 692
 693    memset(buf, 0, 18);
 694    buf[0] = 0x70 | (1 << 7);
 695    buf[2] = s->sense_key;
 696    buf[7] = 10;
 697    buf[12] = s->asc;
 698
 699    if (s->sense_key == UNIT_ATTENTION) {
 700        s->sense_key = NO_SENSE;
 701    }
 702
 703    ide_atapi_cmd_reply(s, 18, max_len);
 704}
 705
 706static void cmd_inquiry(IDEState *s, uint8_t *buf)
 707{
 708    uint8_t page_code = buf[2];
 709    int max_len = buf[4];
 710
 711    unsigned idx = 0;
 712    unsigned size_idx;
 713    unsigned preamble_len;
 714
 715    /* If the EVPD (Enable Vital Product Data) bit is set in byte 1,
 716     * we are being asked for a specific page of info indicated by byte 2. */
 717    if (buf[1] & 0x01) {
 718        preamble_len = 4;
 719        size_idx = 3;
 720
 721        buf[idx++] = 0x05;      /* CD-ROM */
 722        buf[idx++] = page_code; /* Page Code */
 723        buf[idx++] = 0x00;      /* reserved */
 724        idx++;                  /* length (set later) */
 725
 726        switch (page_code) {
 727        case 0x00:
 728            /* Supported Pages: List of supported VPD responses. */
 729            buf[idx++] = 0x00; /* 0x00: Supported Pages, and: */
 730            buf[idx++] = 0x83; /* 0x83: Device Identification. */
 731            break;
 732
 733        case 0x83:
 734            /* Device Identification. Each entry is optional, but the entries
 735             * included here are modeled after libata's VPD responses.
 736             * If the response is given, at least one entry must be present. */
 737
 738            /* Entry 1: Serial */
 739            if (idx + 24 > max_len) {
 740                /* Not enough room for even the first entry: */
 741                /* 4 byte header + 20 byte string */
 742                ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 743                                    ASC_DATA_PHASE_ERROR);
 744                return;
 745            }
 746            buf[idx++] = 0x02; /* Ascii */
 747            buf[idx++] = 0x00; /* Vendor Specific */
 748            buf[idx++] = 0x00;
 749            buf[idx++] = 20;   /* Remaining length */
 750            padstr8(buf + idx, 20, s->drive_serial_str);
 751            idx += 20;
 752
 753            /* Entry 2: Drive Model and Serial */
 754            if (idx + 72 > max_len) {
 755                /* 4 (header) + 8 (vendor) + 60 (model & serial) */
 756                goto out;
 757            }
 758            buf[idx++] = 0x02; /* Ascii */
 759            buf[idx++] = 0x01; /* T10 Vendor */
 760            buf[idx++] = 0x00;
 761            buf[idx++] = 68;
 762            padstr8(buf + idx, 8, "ATA"); /* Generic T10 vendor */
 763            idx += 8;
 764            padstr8(buf + idx, 40, s->drive_model_str);
 765            idx += 40;
 766            padstr8(buf + idx, 20, s->drive_serial_str);
 767            idx += 20;
 768
 769            /* Entry 3: WWN */
 770            if (s->wwn && (idx + 12 <= max_len)) {
 771                /* 4 byte header + 8 byte wwn */
 772                buf[idx++] = 0x01; /* Binary */
 773                buf[idx++] = 0x03; /* NAA */
 774                buf[idx++] = 0x00;
 775                buf[idx++] = 0x08;
 776                stq_be_p(&buf[idx], s->wwn);
 777                idx += 8;
 778            }
 779            break;
 780
 781        default:
 782            /* SPC-3, revision 23 sec. 6.4 */
 783            ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 784                                ASC_INV_FIELD_IN_CMD_PACKET);
 785            return;
 786        }
 787    } else {
 788        preamble_len = 5;
 789        size_idx = 4;
 790
 791        buf[0] = 0x05; /* CD-ROM */
 792        buf[1] = 0x80; /* removable */
 793        buf[2] = 0x00; /* ISO */
 794        buf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */
 795        /* buf[size_idx] set below. */
 796        buf[5] = 0;    /* reserved */
 797        buf[6] = 0;    /* reserved */
 798        buf[7] = 0;    /* reserved */
 799        padstr8(buf + 8, 8, "QEMU");
 800        padstr8(buf + 16, 16, "QEMU DVD-ROM");
 801        padstr8(buf + 32, 4, s->version);
 802        idx = 36;
 803    }
 804
 805 out:
 806    buf[size_idx] = idx - preamble_len;
 807    ide_atapi_cmd_reply(s, idx, max_len);
 808}
 809
 810static void cmd_get_configuration(IDEState *s, uint8_t *buf)
 811{
 812    uint32_t len;
 813    uint8_t index = 0;
 814    int max_len;
 815
 816    /* only feature 0 is supported */
 817    if (buf[2] != 0 || buf[3] != 0) {
 818        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 819                            ASC_INV_FIELD_IN_CMD_PACKET);
 820        return;
 821    }
 822
 823    /* XXX: could result in alignment problems in some architectures */
 824    max_len = lduw_be_p(buf + 7);
 825
 826    /*
 827     * XXX: avoid overflow for io_buffer if max_len is bigger than
 828     *      the size of that buffer (dimensioned to max number of
 829     *      sectors to transfer at once)
 830     *
 831     *      Only a problem if the feature/profiles grow.
 832     */
 833    if (max_len > BDRV_SECTOR_SIZE) {
 834        /* XXX: assume 1 sector */
 835        max_len = BDRV_SECTOR_SIZE;
 836    }
 837
 838    memset(buf, 0, max_len);
 839    /*
 840     * the number of sectors from the media tells us which profile
 841     * to use as current.  0 means there is no media
 842     */
 843    if (media_is_dvd(s)) {
 844        stw_be_p(buf + 6, MMC_PROFILE_DVD_ROM);
 845    } else if (media_is_cd(s)) {
 846        stw_be_p(buf + 6, MMC_PROFILE_CD_ROM);
 847    }
 848
 849    buf[10] = 0x02 | 0x01; /* persistent and current */
 850    len = 12; /* headers: 8 + 4 */
 851    len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_DVD_ROM);
 852    len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_CD_ROM);
 853    stl_be_p(buf, len - 4); /* data length */
 854
 855    ide_atapi_cmd_reply(s, len, max_len);
 856}
 857
 858static void cmd_mode_sense(IDEState *s, uint8_t *buf)
 859{
 860    int action, code;
 861    int max_len;
 862
 863    max_len = lduw_be_p(buf + 7);
 864    action = buf[2] >> 6;
 865    code = buf[2] & 0x3f;
 866
 867    switch(action) {
 868    case 0: /* current values */
 869        switch(code) {
 870        case MODE_PAGE_R_W_ERROR: /* error recovery */
 871            stw_be_p(&buf[0], 16 - 2);
 872            buf[2] = 0x70;
 873            buf[3] = 0;
 874            buf[4] = 0;
 875            buf[5] = 0;
 876            buf[6] = 0;
 877            buf[7] = 0;
 878
 879            buf[8] = MODE_PAGE_R_W_ERROR;
 880            buf[9] = 16 - 10;
 881            buf[10] = 0x00;
 882            buf[11] = 0x05;
 883            buf[12] = 0x00;
 884            buf[13] = 0x00;
 885            buf[14] = 0x00;
 886            buf[15] = 0x00;
 887            ide_atapi_cmd_reply(s, 16, max_len);
 888            break;
 889        case MODE_PAGE_AUDIO_CTL:
 890            stw_be_p(&buf[0], 24 - 2);
 891            buf[2] = 0x70;
 892            buf[3] = 0;
 893            buf[4] = 0;
 894            buf[5] = 0;
 895            buf[6] = 0;
 896            buf[7] = 0;
 897
 898            buf[8] = MODE_PAGE_AUDIO_CTL;
 899            buf[9] = 24 - 10;
 900            /* Fill with CDROM audio volume */
 901            buf[17] = 0;
 902            buf[19] = 0;
 903            buf[21] = 0;
 904            buf[23] = 0;
 905
 906            ide_atapi_cmd_reply(s, 24, max_len);
 907            break;
 908        case MODE_PAGE_CAPABILITIES:
 909            stw_be_p(&buf[0], 30 - 2);
 910            buf[2] = 0x70;
 911            buf[3] = 0;
 912            buf[4] = 0;
 913            buf[5] = 0;
 914            buf[6] = 0;
 915            buf[7] = 0;
 916
 917            buf[8] = MODE_PAGE_CAPABILITIES;
 918            buf[9] = 30 - 10;
 919            buf[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */
 920            buf[11] = 0x00;
 921
 922            /* Claim PLAY_AUDIO capability (0x01) since some Linux
 923               code checks for this to automount media. */
 924            buf[12] = 0x71;
 925            buf[13] = 3 << 5;
 926            buf[14] = (1 << 0) | (1 << 3) | (1 << 5);
 927            if (s->tray_locked) {
 928                buf[14] |= 1 << 1;
 929            }
 930            buf[15] = 0x00; /* No volume & mute control, no changer */
 931            stw_be_p(&buf[16], 704); /* 4x read speed */
 932            buf[18] = 0; /* Two volume levels */
 933            buf[19] = 2;
 934            stw_be_p(&buf[20], 512); /* 512k buffer */
 935            stw_be_p(&buf[22], 704); /* 4x read speed current */
 936            buf[24] = 0;
 937            buf[25] = 0;
 938            buf[26] = 0;
 939            buf[27] = 0;
 940            buf[28] = 0;
 941            buf[29] = 0;
 942            ide_atapi_cmd_reply(s, 30, max_len);
 943            break;
 944        default:
 945            goto error_cmd;
 946        }
 947        break;
 948    case 1: /* changeable values */
 949        goto error_cmd;
 950    case 2: /* default values */
 951        goto error_cmd;
 952    default:
 953    case 3: /* saved values */
 954        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
 955                            ASC_SAVING_PARAMETERS_NOT_SUPPORTED);
 956        break;
 957    }
 958    return;
 959
 960error_cmd:
 961    ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET);
 962}
 963
 964static void cmd_test_unit_ready(IDEState *s, uint8_t *buf)
 965{
 966    /* Not Ready Conditions are already handled in ide_atapi_cmd(), so if we
 967     * come here, we know that it's ready. */
 968    ide_atapi_cmd_ok(s);
 969}
 970
 971static void cmd_prevent_allow_medium_removal(IDEState *s, uint8_t* buf)
 972{
 973    s->tray_locked = buf[4] & 1;
 974    blk_lock_medium(s->blk, buf[4] & 1);
 975    ide_atapi_cmd_ok(s);
 976}
 977
 978static void cmd_read(IDEState *s, uint8_t* buf)
 979{
 980    unsigned int nb_sectors, lba;
 981
 982    /* Total logical sectors of ATAPI_SECTOR_SIZE(=2048) bytes */
 983    uint64_t total_sectors = s->nb_sectors >> 2;
 984
 985    if (buf[0] == GPCMD_READ_10) {
 986        nb_sectors = lduw_be_p(buf + 7);
 987    } else {
 988        nb_sectors = ldl_be_p(buf + 6);
 989    }
 990    if (nb_sectors == 0) {
 991        ide_atapi_cmd_ok(s);
 992        return;
 993    }
 994
 995    lba = ldl_be_p(buf + 2);
 996    if (lba >= total_sectors || lba + nb_sectors - 1 >= total_sectors) {
 997        ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
 998        return;
 999    }
1000
1001    ide_atapi_cmd_read(s, lba, nb_sectors, 2048);
1002}
1003
1004static void cmd_read_cd(IDEState *s, uint8_t* buf)
1005{
1006    unsigned int nb_sectors, lba, transfer_request;
1007
1008    /* Total logical sectors of ATAPI_SECTOR_SIZE(=2048) bytes */
1009    uint64_t total_sectors = s->nb_sectors >> 2;
1010
1011    nb_sectors = (buf[6] << 16) | (buf[7] << 8) | buf[8];
1012    if (nb_sectors == 0) {
1013        ide_atapi_cmd_ok(s);
1014        return;
1015    }
1016
1017    lba = ldl_be_p(buf + 2);
1018    if (lba >= total_sectors || lba + nb_sectors - 1 >= total_sectors) {
1019        ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
1020        return;
1021    }
1022
1023    transfer_request = buf[9] & 0xf8;
1024    if (transfer_request == 0x00) {
1025        /* nothing */
1026        ide_atapi_cmd_ok(s);
1027        return;
1028    }
1029
1030    /* Check validity of BCL before transferring data */
1031    if (!validate_bcl(s)) {
1032        return;
1033    }
1034
1035    switch (transfer_request) {
1036    case 0x10:
1037        /* normal read */
1038        ide_atapi_cmd_read(s, lba, nb_sectors, 2048);
1039        break;
1040    case 0xf8:
1041        /* read all data */
1042        ide_atapi_cmd_read(s, lba, nb_sectors, 2352);
1043        break;
1044    default:
1045        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1046                            ASC_INV_FIELD_IN_CMD_PACKET);
1047        break;
1048    }
1049}
1050
1051static void cmd_seek(IDEState *s, uint8_t* buf)
1052{
1053    unsigned int lba;
1054    uint64_t total_sectors = s->nb_sectors >> 2;
1055
1056    lba = ldl_be_p(buf + 2);
1057    if (lba >= total_sectors) {
1058        ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
1059        return;
1060    }
1061
1062    ide_atapi_cmd_ok(s);
1063}
1064
1065static void cmd_start_stop_unit(IDEState *s, uint8_t* buf)
1066{
1067    int sense;
1068    bool start = buf[4] & 1;
1069    bool loej = buf[4] & 2;     /* load on start, eject on !start */
1070    int pwrcnd = buf[4] & 0xf0;
1071
1072    if (pwrcnd) {
1073        /* eject/load only happens for power condition == 0 */
1074        ide_atapi_cmd_ok(s);
1075        return;
1076    }
1077
1078    if (loej) {
1079        if (!start && !s->tray_open && s->tray_locked) {
1080            sense = blk_is_inserted(s->blk)
1081                ? NOT_READY : ILLEGAL_REQUEST;
1082            ide_atapi_cmd_error(s, sense, ASC_MEDIA_REMOVAL_PREVENTED);
1083            return;
1084        }
1085
1086        if (s->tray_open != !start) {
1087            blk_eject(s->blk, !start);
1088            s->tray_open = !start;
1089        }
1090    }
1091
1092    ide_atapi_cmd_ok(s);
1093}
1094
1095static void cmd_mechanism_status(IDEState *s, uint8_t* buf)
1096{
1097    int max_len = lduw_be_p(buf + 8);
1098
1099    stw_be_p(buf, 0);
1100    /* no current LBA */
1101    buf[2] = 0;
1102    buf[3] = 0;
1103    buf[4] = 0;
1104    buf[5] = 1;
1105    stw_be_p(buf + 6, 0);
1106    ide_atapi_cmd_reply(s, 8, max_len);
1107}
1108
1109static void cmd_read_toc_pma_atip(IDEState *s, uint8_t* buf)
1110{
1111    int format, msf, start_track, len;
1112    int max_len;
1113    uint64_t total_sectors = s->nb_sectors >> 2;
1114
1115    max_len = lduw_be_p(buf + 7);
1116    format = buf[9] >> 6;
1117    msf = (buf[1] >> 1) & 1;
1118    start_track = buf[6];
1119
1120    switch(format) {
1121    case 0:
1122        len = cdrom_read_toc(total_sectors, buf, msf, start_track);
1123        if (len < 0)
1124            goto error_cmd;
1125        ide_atapi_cmd_reply(s, len, max_len);
1126        break;
1127    case 1:
1128        /* multi session : only a single session defined */
1129        memset(buf, 0, 12);
1130        buf[1] = 0x0a;
1131        buf[2] = 0x01;
1132        buf[3] = 0x01;
1133        ide_atapi_cmd_reply(s, 12, max_len);
1134        break;
1135    case 2:
1136        len = cdrom_read_toc_raw(total_sectors, buf, msf, start_track);
1137        if (len < 0)
1138            goto error_cmd;
1139        ide_atapi_cmd_reply(s, len, max_len);
1140        break;
1141    default:
1142    error_cmd:
1143        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1144                            ASC_INV_FIELD_IN_CMD_PACKET);
1145    }
1146}
1147
1148static void cmd_read_cdvd_capacity(IDEState *s, uint8_t* buf)
1149{
1150    uint64_t total_sectors = s->nb_sectors >> 2;
1151
1152    /* NOTE: it is really the number of sectors minus 1 */
1153    stl_be_p(buf, total_sectors - 1);
1154    stl_be_p(buf + 4, 2048);
1155    ide_atapi_cmd_reply(s, 8, 8);
1156}
1157
1158static void cmd_read_disc_information(IDEState *s, uint8_t* buf)
1159{
1160    uint8_t type = buf[1] & 7;
1161    uint32_t max_len = lduw_be_p(buf + 7);
1162
1163    /* Types 1/2 are only defined for Blu-Ray.  */
1164    if (type != 0) {
1165        ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1166                            ASC_INV_FIELD_IN_CMD_PACKET);
1167        return;
1168    }
1169
1170    memset(buf, 0, 34);
1171    buf[1] = 32;
1172    buf[2] = 0xe; /* last session complete, disc finalized */
1173    buf[3] = 1;   /* first track on disc */
1174    buf[4] = 1;   /* # of sessions */
1175    buf[5] = 1;   /* first track of last session */
1176    buf[6] = 1;   /* last track of last session */
1177    buf[7] = 0x20; /* unrestricted use */
1178    buf[8] = 0x00; /* CD-ROM or DVD-ROM */
1179    /* 9-10-11: most significant byte corresponding bytes 4-5-6 */
1180    /* 12-23: not meaningful for CD-ROM or DVD-ROM */
1181    /* 24-31: disc bar code */
1182    /* 32: disc application code */
1183    /* 33: number of OPC tables */
1184
1185    ide_atapi_cmd_reply(s, 34, max_len);
1186}
1187
1188static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf)
1189{
1190    int max_len;
1191    int media = buf[1];
1192    int format = buf[7];
1193    int ret;
1194
1195    max_len = lduw_be_p(buf + 8);
1196
1197    if (format < 0xff) {
1198        if (media_is_cd(s)) {
1199            ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1200                                ASC_INCOMPATIBLE_FORMAT);
1201            return;
1202        } else if (!media_present(s)) {
1203            ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1204                                ASC_INV_FIELD_IN_CMD_PACKET);
1205            return;
1206        }
1207    }
1208
1209    memset(buf, 0, max_len > IDE_DMA_BUF_SECTORS * BDRV_SECTOR_SIZE + 4 ?
1210           IDE_DMA_BUF_SECTORS * BDRV_SECTOR_SIZE + 4 : max_len);
1211
1212    switch (format) {
1213        case 0x00 ... 0x7f:
1214        case 0xff:
1215            if (media == 0) {
1216                ret = ide_dvd_read_structure(s, format, buf, buf);
1217
1218                if (ret < 0) {
1219                    ide_atapi_cmd_error(s, ILLEGAL_REQUEST, -ret);
1220                } else {
1221                    ide_atapi_cmd_reply(s, ret, max_len);
1222                }
1223
1224                break;
1225            }
1226            /* TODO: BD support, fall through for now */
1227
1228        /* Generic disk structures */
1229        case 0x80: /* TODO: AACS volume identifier */
1230        case 0x81: /* TODO: AACS media serial number */
1231        case 0x82: /* TODO: AACS media identifier */
1232        case 0x83: /* TODO: AACS media key block */
1233        case 0x90: /* TODO: List of recognized format layers */
1234        case 0xc0: /* TODO: Write protection status */
1235        default:
1236            ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1237                                ASC_INV_FIELD_IN_CMD_PACKET);
1238            break;
1239    }
1240}
1241
1242static void cmd_set_speed(IDEState *s, uint8_t* buf)
1243{
1244    ide_atapi_cmd_ok(s);
1245}
1246
1247enum {
1248    /*
1249     * Only commands flagged as ALLOW_UA are allowed to run under a
1250     * unit attention condition. (See MMC-5, section 4.1.6.1)
1251     */
1252    ALLOW_UA = 0x01,
1253
1254    /*
1255     * Commands flagged with CHECK_READY can only execute if a medium is present.
1256     * Otherwise they report the Not Ready Condition. (See MMC-5, section
1257     * 4.1.8)
1258     */
1259    CHECK_READY = 0x02,
1260
1261    /*
1262     * Commands flagged with NONDATA do not in any circumstances return
1263     * any data via ide_atapi_cmd_reply. These commands are exempt from
1264     * the normal byte_count_limit constraints.
1265     * See ATA8-ACS3 "7.21.5 Byte Count Limit"
1266     */
1267    NONDATA = 0x04,
1268
1269    /*
1270     * CONDDATA implies a command that transfers data only conditionally based
1271     * on the presence of suboptions. It should be exempt from the BCL check at
1272     * command validation time, but it needs to be checked at the command
1273     * handler level instead.
1274     */
1275    CONDDATA = 0x08,
1276};
1277
1278static const struct AtapiCmd {
1279    void (*handler)(IDEState *s, uint8_t *buf);
1280    int flags;
1281} atapi_cmd_table[0x100] = {
1282    [ 0x00 ] = { cmd_test_unit_ready,               CHECK_READY | NONDATA },
1283    [ 0x03 ] = { cmd_request_sense,                 ALLOW_UA },
1284    [ 0x12 ] = { cmd_inquiry,                       ALLOW_UA },
1285    [ 0x1b ] = { cmd_start_stop_unit,               NONDATA }, /* [1] */
1286    [ 0x1e ] = { cmd_prevent_allow_medium_removal,  NONDATA },
1287    [ 0x25 ] = { cmd_read_cdvd_capacity,            CHECK_READY },
1288    [ 0x28 ] = { cmd_read, /* (10) */               CHECK_READY },
1289    [ 0x2b ] = { cmd_seek,                          CHECK_READY | NONDATA },
1290    [ 0x43 ] = { cmd_read_toc_pma_atip,             CHECK_READY },
1291    [ 0x46 ] = { cmd_get_configuration,             ALLOW_UA },
1292    [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA },
1293    [ 0x51 ] = { cmd_read_disc_information,         CHECK_READY },
1294    [ 0x5a ] = { cmd_mode_sense, /* (10) */         0 },
1295    [ 0xa8 ] = { cmd_read, /* (12) */               CHECK_READY },
1296    [ 0xad ] = { cmd_read_dvd_structure,            CHECK_READY },
1297    [ 0xbb ] = { cmd_set_speed,                     NONDATA },
1298    [ 0xbd ] = { cmd_mechanism_status,              0 },
1299    [ 0xbe ] = { cmd_read_cd,                       CHECK_READY | CONDDATA },
1300    /* [1] handler detects and reports not ready condition itself */
1301};
1302
1303void ide_atapi_cmd(IDEState *s)
1304{
1305    uint8_t *buf = s->io_buffer;
1306    const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]];
1307
1308    trace_ide_atapi_cmd(s, s->io_buffer[0]);
1309
1310    if (trace_event_get_state_backends(TRACE_IDE_ATAPI_CMD_PACKET)) {
1311        /* Each pretty-printed byte needs two bytes and a space; */
1312        char *ppacket = g_malloc(ATAPI_PACKET_SIZE * 3 + 1);
1313        int i;
1314        for (i = 0; i < ATAPI_PACKET_SIZE; i++) {
1315            sprintf(ppacket + (i * 3), "%02x ", buf[i]);
1316        }
1317        trace_ide_atapi_cmd_packet(s, s->lcyl | (s->hcyl << 8), ppacket);
1318        g_free(ppacket);
1319    }
1320
1321    /*
1322     * If there's a UNIT_ATTENTION condition pending, only command flagged with
1323     * ALLOW_UA are allowed to complete. with other commands getting a CHECK
1324     * condition response unless a higher priority status, defined by the drive
1325     * here, is pending.
1326     */
1327    if (s->sense_key == UNIT_ATTENTION && !(cmd->flags & ALLOW_UA)) {
1328        ide_atapi_cmd_check_status(s);
1329        return;
1330    }
1331    /*
1332     * When a CD gets changed, we have to report an ejected state and
1333     * then a loaded state to guests so that they detect tray
1334     * open/close and media change events.  Guests that do not use
1335     * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
1336     * states rely on this behavior.
1337     */
1338    if (!(cmd->flags & ALLOW_UA) &&
1339        !s->tray_open && blk_is_inserted(s->blk) && s->cdrom_changed) {
1340
1341        if (s->cdrom_changed == 1) {
1342            ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
1343            s->cdrom_changed = 2;
1344        } else {
1345            ide_atapi_cmd_error(s, UNIT_ATTENTION, ASC_MEDIUM_MAY_HAVE_CHANGED);
1346            s->cdrom_changed = 0;
1347        }
1348
1349        return;
1350    }
1351
1352    /* Report a Not Ready condition if appropriate for the command */
1353    if ((cmd->flags & CHECK_READY) &&
1354        (!media_present(s) || !blk_is_inserted(s->blk)))
1355    {
1356        ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
1357        return;
1358    }
1359
1360    /* Commands that don't transfer DATA permit the byte_count_limit to be 0.
1361     * If this is a data-transferring PIO command and BCL is 0,
1362     * we abort at the /ATA/ level, not the ATAPI level.
1363     * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */
1364    if (cmd->handler && !(cmd->flags & (NONDATA | CONDDATA))) {
1365        if (!validate_bcl(s)) {
1366            return;
1367        }
1368    }
1369
1370    /* Execute the command */
1371    if (cmd->handler) {
1372        cmd->handler(s, buf);
1373        return;
1374    }
1375
1376    ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_ILLEGAL_OPCODE);
1377}
1378