qemu/include/hw/ide/internal.h
<<
>>
Prefs 
   1#ifndef HW_IDE_INTERNAL_H
   2#define HW_IDE_INTERNAL_H
   3
   4/*
   5 * QEMU IDE Emulation -- internal header file
   6 * only files in hw/ide/ are supposed to include this file.
   7 * non-internal declarations are in hw/ide.h
   8 */
   9
  10#include "qapi/qapi-types-run-state.h"
  11#include "hw/ide.h"
  12#include "hw/irq.h"
  13#include "hw/isa/isa.h"
  14#include "sysemu/dma.h"
  15#include "hw/block/block.h"
  16#include "scsi/constants.h"
  17
  18/* debug IDE devices */
  19#define USE_DMA_CDROM
  20#include "qom/object.h"
  21
  22typedef struct IDEDevice IDEDevice;
  23typedef struct IDEState IDEState;
  24typedef struct IDEDMA IDEDMA;
  25typedef struct IDEDMAOps IDEDMAOps;
  26
  27#define TYPE_IDE_BUS "IDE"
  28OBJECT_DECLARE_SIMPLE_TYPE(IDEBus, IDE_BUS)
  29
  30#define MAX_IDE_DEVS 2
  31
  32/* Device/Head ("select") Register */
  33#define ATA_DEV_SELECT          0x10
  34/* ATA1,3: Defined as '1'.
  35 * ATA2:   Reserved.
  36 * ATA3-7: obsolete. */
  37#define ATA_DEV_ALWAYS_ON       0xA0
  38#define ATA_DEV_LBA             0x40
  39#define ATA_DEV_LBA_MSB         0x0F  /* LBA 24:27 */
  40#define ATA_DEV_HS              0x0F  /* HS 3:0 */
  41
  42
  43/* Bits of HD_STATUS */
  44#define ERR_STAT                0x01
  45#define INDEX_STAT              0x02
  46#define ECC_STAT                0x04    /* Corrected error */
  47#define DRQ_STAT                0x08
  48#define SEEK_STAT               0x10
  49#define SRV_STAT                0x10
  50#define WRERR_STAT              0x20
  51#define READY_STAT              0x40
  52#define BUSY_STAT               0x80
  53
  54/* Bits for HD_ERROR */
  55#define MARK_ERR                0x01    /* Bad address mark */
  56#define TRK0_ERR                0x02    /* couldn't find track 0 */
  57#define ABRT_ERR                0x04    /* Command aborted */
  58#define MCR_ERR                 0x08    /* media change request */
  59#define ID_ERR                  0x10    /* ID field not found */
  60#define MC_ERR                  0x20    /* media changed */
  61#define ECC_ERR                 0x40    /* Uncorrectable ECC error */
  62#define BBD_ERR                 0x80    /* pre-EIDE meaning:  block marked bad */
  63#define ICRC_ERR                0x80    /* new meaning:  CRC error during transfer */
  64
  65/* Bits of HD_NSECTOR */
  66#define CD                      0x01
  67#define IO                      0x02
  68#define REL                     0x04
  69#define TAG_MASK                0xf8
  70
  71/* Bits of Device Control register */
  72#define IDE_CTRL_HOB            0x80
  73#define IDE_CTRL_RESET          0x04
  74#define IDE_CTRL_DISABLE_IRQ    0x02
  75
  76/* ACS-2 T13/2015-D Table B.2 Command codes */
  77#define WIN_NOP                         0x00
  78/* reserved                             0x01..0x02 */
  79#define CFA_REQ_EXT_ERROR_CODE          0x03 /* CFA Request Extended Error Code */
  80/* reserved                             0x04..0x05 */
  81#define WIN_DSM                         0x06
  82/* reserved                             0x07 */
  83#define WIN_DEVICE_RESET                0x08
  84/* reserved                             0x09..0x0a */
  85/* REQUEST SENSE DATA EXT               0x0B */
  86/* reserved                             0x0C..0x0F */
  87#define WIN_RECAL                       0x10 /* obsolete since ATA4 */
  88/* obsolete since ATA3, retired in ATA4 0x11..0x1F */
  89#define WIN_READ                        0x20 /* 28-Bit */
  90#define WIN_READ_ONCE                   0x21 /* 28-Bit w/o retries, obsolete since ATA5 */
  91/* obsolete since ATA4                  0x22..0x23 */
  92#define WIN_READ_EXT                    0x24 /* 48-Bit */
  93#define WIN_READDMA_EXT                 0x25 /* 48-Bit */
  94#define WIN_READDMA_QUEUED_EXT          0x26 /* 48-Bit, obsolete since ACS2 */
  95#define WIN_READ_NATIVE_MAX_EXT         0x27 /* 48-Bit */
  96/* reserved                             0x28 */
  97#define WIN_MULTREAD_EXT                0x29 /* 48-Bit */
  98/* READ STREAM DMA EXT                  0x2A */
  99/* READ STREAM EXT                      0x2B */
 100/* reserved                             0x2C..0x2E */
 101/* READ LOG EXT                         0x2F */
 102#define WIN_WRITE                       0x30 /* 28-Bit */
 103#define WIN_WRITE_ONCE                  0x31 /* 28-Bit w/o retries, obsolete since ATA5 */
 104/* obsolete since ATA4                  0x32..0x33 */
 105#define WIN_WRITE_EXT                   0x34 /* 48-Bit */
 106#define WIN_WRITEDMA_EXT                0x35 /* 48-Bit */
 107#define WIN_WRITEDMA_QUEUED_EXT         0x36 /* 48-Bit */
 108#define WIN_SET_MAX_EXT                 0x37 /* 48-Bit, obsolete since ACS2 */
 109#define WIN_SET_MAX_EXT                 0x37 /* 48-Bit */
 110#define CFA_WRITE_SECT_WO_ERASE         0x38 /* CFA Write Sectors without erase */
 111#define WIN_MULTWRITE_EXT               0x39 /* 48-Bit */
 112/* WRITE STREAM DMA EXT                 0x3A */
 113/* WRITE STREAM EXT                     0x3B */
 114#define WIN_WRITE_VERIFY                0x3C /* 28-Bit, obsolete since ATA4 */
 115/* WRITE DMA FUA EXT                    0x3D */
 116/* obsolete since ACS2                  0x3E */
 117/* WRITE LOG EXT                        0x3F */
 118#define WIN_VERIFY                      0x40 /* 28-Bit - Read Verify Sectors */
 119#define WIN_VERIFY_ONCE                 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */
 120#define WIN_VERIFY_EXT                  0x42 /* 48-Bit */
 121/* reserved                             0x43..0x44 */
 122/* WRITE UNCORRECTABLE EXT              0x45 */
 123/* reserved                             0x46 */
 124/* READ LOG DMA EXT                     0x47 */
 125/* reserved                             0x48..0x4F */
 126/* obsolete since ATA4                  0x50 */
 127/* CONFIGURE STREAM                     0x51 */
 128/* reserved                             0x52..0x56 */
 129/* WRITE LOG DMA EXT                    0x57 */
 130/* reserved                             0x58..0x5A */
 131/* TRUSTED NON DATA                     0x5B */
 132/* TRUSTED RECEIVE                      0x5C */
 133/* TRUSTED RECEIVE DMA                  0x5D */
 134/* TRUSTED SEND                         0x5E */
 135/* TRUSTED SEND DMA                     0x5F */
 136/* READ FPDMA QUEUED                    0x60 */
 137/* WRITE FPDMA QUEUED                   0x61 */
 138/* reserved                             0x62->0x6F */
 139#define WIN_SEEK                        0x70 /* obsolete since ATA7 */
 140/* reserved                             0x71-0x7F */
 141/* vendor specific                      0x80-0x86 */
 142#define CFA_TRANSLATE_SECTOR            0x87 /* CFA Translate Sector */
 143/* vendor specific                      0x88-0x8F */
 144#define WIN_DIAGNOSE                    0x90
 145#define WIN_SPECIFY                     0x91 /* set drive geometry translation, obsolete since ATA6 */
 146#define WIN_DOWNLOAD_MICROCODE          0x92
 147/* DOWNLOAD MICROCODE DMA               0x93 */
 148#define WIN_STANDBYNOW2                 0x94 /* retired in ATA4 */
 149#define WIN_IDLEIMMEDIATE2              0x95 /* force drive to become "ready", retired in ATA4 */
 150#define WIN_STANDBY2                    0x96 /* retired in ATA4 */
 151#define WIN_SETIDLE2                    0x97 /* retired in ATA4 */
 152#define WIN_CHECKPOWERMODE2             0x98 /* retired in ATA4 */
 153#define WIN_SLEEPNOW2                   0x99 /* retired in ATA4 */
 154/* vendor specific                      0x9A */
 155/* reserved                             0x9B..0x9F */
 156#define WIN_PACKETCMD                   0xA0 /* Send a packet command. */
 157#define WIN_PIDENTIFY                   0xA1 /* identify ATAPI device   */
 158#define WIN_QUEUED_SERVICE              0xA2 /* obsolete since ACS2 */
 159/* reserved                             0xA3..0xAF */
 160#define WIN_SMART                       0xB0 /* self-monitoring and reporting */
 161/* Device Configuration Overlay         0xB1 */
 162/* reserved                             0xB2..0xB3 */
 163/* Sanitize Device                      0xB4 */
 164/* reserved                             0xB5 */
 165/* NV Cache                             0xB6 */
 166/* reserved for CFA                     0xB7..0xBB */
 167#define CFA_ACCESS_METADATA_STORAGE     0xB8
 168/* reserved                             0xBC..0xBF */
 169#define CFA_ERASE_SECTORS               0xC0 /* microdrives implement as NOP */
 170/* vendor specific                      0xC1..0xC3 */
 171#define WIN_MULTREAD                    0xC4 /* read sectors using multiple mode*/
 172#define WIN_MULTWRITE                   0xC5 /* write sectors using multiple mode */
 173#define WIN_SETMULT                     0xC6 /* enable/disable multiple mode */
 174#define WIN_READDMA_QUEUED              0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */
 175#define WIN_READDMA                     0xC8 /* read sectors using DMA transfers */
 176#define WIN_READDMA_ONCE                0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */
 177#define WIN_WRITEDMA                    0xCA /* write sectors using DMA transfers */
 178#define WIN_WRITEDMA_ONCE               0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */
 179#define WIN_WRITEDMA_QUEUED             0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */
 180#define CFA_WRITE_MULTI_WO_ERASE        0xCD /* CFA Write multiple without erase */
 181/* WRITE MULTIPLE FUA EXT               0xCE */
 182/* reserved                             0xCF..0xDO */
 183/* CHECK MEDIA CARD TYPE                0xD1 */
 184/* reserved for media card pass through 0xD2..0xD4 */
 185/* reserved                             0xD5..0xD9 */
 186#define WIN_GETMEDIASTATUS              0xDA /* obsolete since ATA8 */
 187/* obsolete since ATA3, retired in ATA4 0xDB..0xDD */
 188#define WIN_DOORLOCK                    0xDE /* lock door on removable drives, obsolete since ATA8 */
 189#define WIN_DOORUNLOCK                  0xDF /* unlock door on removable drives, obsolete since ATA8 */
 190#define WIN_STANDBYNOW1                 0xE0
 191#define WIN_IDLEIMMEDIATE               0xE1 /* force drive to become "ready" */
 192#define WIN_STANDBY                     0xE2 /* Set device in Standby Mode */
 193#define WIN_SETIDLE1                    0xE3
 194#define WIN_READ_BUFFER                 0xE4 /* force read only 1 sector */
 195#define WIN_CHECKPOWERMODE1             0xE5
 196#define WIN_SLEEPNOW1                   0xE6
 197#define WIN_FLUSH_CACHE                 0xE7
 198#define WIN_WRITE_BUFFER                0xE8 /* force write only 1 sector */
 199/* READ BUFFER DMA                      0xE9 */
 200#define WIN_FLUSH_CACHE_EXT             0xEA /* 48-Bit */
 201/* WRITE BUFFER DMA                     0xEB */
 202#define WIN_IDENTIFY                    0xEC /* ask drive to identify itself    */
 203#define WIN_MEDIAEJECT                  0xED /* obsolete since ATA8 */
 204/* obsolete since ATA4                  0xEE */
 205#define WIN_SETFEATURES                 0xEF /* set special drive features */
 206#define IBM_SENSE_CONDITION             0xF0 /* measure disk temperature, vendor specific */
 207#define WIN_SECURITY_SET_PASS           0xF1
 208#define WIN_SECURITY_UNLOCK             0xF2
 209#define WIN_SECURITY_ERASE_PREPARE      0xF3
 210#define WIN_SECURITY_ERASE_UNIT         0xF4
 211#define WIN_SECURITY_FREEZE_LOCK        0xF5
 212#define CFA_WEAR_LEVEL                  0xF5 /* microdrives implement as NOP; not specified in T13! */
 213#define WIN_SECURITY_DISABLE            0xF6
 214/* vendor specific                      0xF7 */
 215#define WIN_READ_NATIVE_MAX             0xF8 /* return the native maximum address */
 216#define WIN_SET_MAX                     0xF9
 217/* vendor specific                      0xFA..0xFF */
 218
 219/* set to 1 set disable mult support */
 220#define MAX_MULT_SECTORS 16
 221
 222#define IDE_DMA_BUF_SECTORS 256
 223
 224/* feature values for Data Set Management */
 225#define DSM_TRIM                        0x01
 226
 227#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
 228#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
 229#endif
 230
 231/* ATAPI defines */
 232
 233#define ATAPI_PACKET_SIZE 12
 234
 235/* The generic packet command opcodes for CD/DVD Logical Units,
 236 * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
 237#define GPCMD_BLANK                         0xa1
 238#define GPCMD_CLOSE_TRACK                   0x5b
 239#define GPCMD_FLUSH_CACHE                   0x35
 240#define GPCMD_FORMAT_UNIT                   0x04
 241#define GPCMD_GET_CONFIGURATION             0x46
 242#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
 243#define GPCMD_GET_PERFORMANCE               0xac
 244#define GPCMD_INQUIRY                       0x12
 245#define GPCMD_LOAD_UNLOAD                   0xa6
 246#define GPCMD_MECHANISM_STATUS              0xbd
 247#define GPCMD_MODE_SELECT_10                0x55
 248#define GPCMD_MODE_SENSE_10                 0x5a
 249#define GPCMD_PAUSE_RESUME                  0x4b
 250#define GPCMD_PLAY_AUDIO_10                 0x45
 251#define GPCMD_PLAY_AUDIO_MSF                0x47
 252#define GPCMD_PLAY_AUDIO_TI                 0x48
 253#define GPCMD_PLAY_CD                       0xbc
 254#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
 255#define GPCMD_READ_10                       0x28
 256#define GPCMD_READ_12                       0xa8
 257#define GPCMD_READ_CDVD_CAPACITY            0x25
 258#define GPCMD_READ_CD                       0xbe
 259#define GPCMD_READ_CD_MSF                   0xb9
 260#define GPCMD_READ_DISC_INFO                0x51
 261#define GPCMD_READ_DVD_STRUCTURE            0xad
 262#define GPCMD_READ_FORMAT_CAPACITIES        0x23
 263#define GPCMD_READ_HEADER                   0x44
 264#define GPCMD_READ_TRACK_RZONE_INFO         0x52
 265#define GPCMD_READ_SUBCHANNEL               0x42
 266#define GPCMD_READ_TOC_PMA_ATIP             0x43
 267#define GPCMD_REPAIR_RZONE_TRACK            0x58
 268#define GPCMD_REPORT_KEY                    0xa4
 269#define GPCMD_REQUEST_SENSE                 0x03
 270#define GPCMD_RESERVE_RZONE_TRACK           0x53
 271#define GPCMD_SCAN                          0xba
 272#define GPCMD_SEEK                          0x2b
 273#define GPCMD_SEND_DVD_STRUCTURE            0xad
 274#define GPCMD_SEND_EVENT                    0xa2
 275#define GPCMD_SEND_KEY                      0xa3
 276#define GPCMD_SEND_OPC                      0x54
 277#define GPCMD_SET_READ_AHEAD                0xa7
 278#define GPCMD_SET_STREAMING                 0xb6
 279#define GPCMD_START_STOP_UNIT               0x1b
 280#define GPCMD_STOP_PLAY_SCAN                0x4e
 281#define GPCMD_TEST_UNIT_READY               0x00
 282#define GPCMD_VERIFY_10                     0x2f
 283#define GPCMD_WRITE_10                      0x2a
 284#define GPCMD_WRITE_AND_VERIFY_10           0x2e
 285/* This is listed as optional in ATAPI 2.6, but is (curiously)
 286 * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
 287 * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
 288 * drives support it. */
 289#define GPCMD_SET_SPEED                     0xbb
 290/* This seems to be a SCSI specific CD-ROM opcode
 291 * to play data at track/index */
 292#define GPCMD_PLAYAUDIO_TI                  0x48
 293/*
 294 * From MS Media Status Notification Support Specification. For
 295 * older drives only.
 296 */
 297#define GPCMD_GET_MEDIA_STATUS              0xda
 298#define GPCMD_MODE_SENSE_6                  0x1a
 299
 300#define ATAPI_INT_REASON_CD             0x01 /* 0 = data transfer */
 301#define ATAPI_INT_REASON_IO             0x02 /* 1 = transfer to the host */
 302#define ATAPI_INT_REASON_REL            0x04
 303#define ATAPI_INT_REASON_TAG            0xf8
 304
 305/* same constants as bochs */
 306#define ASC_NO_SEEK_COMPLETE                 0x02
 307#define ASC_ILLEGAL_OPCODE                   0x20
 308#define ASC_LOGICAL_BLOCK_OOR                0x21
 309#define ASC_INV_FIELD_IN_CMD_PACKET          0x24
 310#define ASC_MEDIUM_MAY_HAVE_CHANGED          0x28
 311#define ASC_INCOMPATIBLE_FORMAT              0x30
 312#define ASC_MEDIUM_NOT_PRESENT               0x3a
 313#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED  0x39
 314#define ASC_DATA_PHASE_ERROR                 0x4b
 315#define ASC_MEDIA_REMOVAL_PREVENTED          0x53
 316
 317#define CFA_NO_ERROR            0x00
 318#define CFA_MISC_ERROR          0x09
 319#define CFA_INVALID_COMMAND     0x20
 320#define CFA_INVALID_ADDRESS     0x21
 321#define CFA_ADDRESS_OVERFLOW    0x2f
 322
 323#define SMART_READ_DATA       0xd0
 324#define SMART_READ_THRESH     0xd1
 325#define SMART_ATTR_AUTOSAVE   0xd2
 326#define SMART_SAVE_ATTR       0xd3
 327#define SMART_EXECUTE_OFFLINE 0xd4
 328#define SMART_READ_LOG        0xd5
 329#define SMART_WRITE_LOG       0xd6
 330#define SMART_ENABLE          0xd8
 331#define SMART_DISABLE         0xd9
 332#define SMART_STATUS          0xda
 333
 334typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;
 335
 336typedef void EndTransferFunc(IDEState *);
 337
 338typedef void DMAStartFunc(const IDEDMA *, IDEState *, BlockCompletionFunc *);
 339typedef void DMAVoidFunc(const IDEDMA *);
 340typedef int DMAIntFunc(const IDEDMA *, bool);
 341typedef int32_t DMAInt32Func(const IDEDMA *, int32_t len);
 342typedef void DMAu32Func(const IDEDMA *, uint32_t);
 343typedef void DMAStopFunc(const IDEDMA *, bool);
 344
 345struct unreported_events {
 346    bool eject_request;
 347    bool new_media;
 348};
 349
 350enum ide_dma_cmd {
 351    IDE_DMA_READ = 0,
 352    IDE_DMA_WRITE,
 353    IDE_DMA_TRIM,
 354    IDE_DMA_ATAPI,
 355    IDE_DMA__COUNT
 356};
 357
 358extern const char *IDE_DMA_CMD_lookup[IDE_DMA__COUNT];
 359
 360#define ide_cmd_is_read(s) \
 361        ((s)->dma_cmd == IDE_DMA_READ)
 362
 363typedef struct IDEBufferedRequest {
 364    QLIST_ENTRY(IDEBufferedRequest) list;
 365    QEMUIOVector qiov;
 366    QEMUIOVector *original_qiov;
 367    BlockCompletionFunc *original_cb;
 368    void *original_opaque;
 369    bool orphaned;
 370} IDEBufferedRequest;
 371
 372/* NOTE: IDEState represents in fact one drive */
 373struct IDEState {
 374    IDEBus *bus;
 375    uint8_t unit;
 376    /* ide config */
 377    IDEDriveKind drive_kind;
 378    int cylinders, heads, sectors, chs_trans;
 379    int64_t nb_sectors;
 380    int mult_sectors;
 381    int identify_set;
 382    uint8_t identify_data[512];
 383    int drive_serial;
 384    char drive_serial_str[21];
 385    char drive_model_str[41];
 386    uint64_t wwn;
 387    /* ide regs */
 388    uint8_t feature;
 389    uint8_t error;
 390    uint32_t nsector;
 391    uint8_t sector;
 392    uint8_t lcyl;
 393    uint8_t hcyl;
 394    /* other part of tf for lba48 support */
 395    uint8_t hob_feature;
 396    uint8_t hob_nsector;
 397    uint8_t hob_sector;
 398    uint8_t hob_lcyl;
 399    uint8_t hob_hcyl;
 400
 401    uint8_t select;
 402    uint8_t status;
 403
 404    /* set for lba48 access */
 405    uint8_t lba48;
 406    BlockBackend *blk;
 407    char version[9];
 408    /* ATAPI specific */
 409    struct unreported_events events;
 410    uint8_t sense_key;
 411    uint8_t asc;
 412    bool tray_open;
 413    bool tray_locked;
 414    uint8_t cdrom_changed;
 415    int packet_transfer_size;
 416    int elementary_transfer_size;
 417    int32_t io_buffer_index;
 418    int lba;
 419    int cd_sector_size;
 420    int atapi_dma; /* true if dma is requested for the packet cmd */
 421    BlockAcctCookie acct;
 422    BlockAIOCB *pio_aiocb;
 423    QEMUIOVector qiov;
 424    QLIST_HEAD(, IDEBufferedRequest) buffered_requests;
 425    /* ATA DMA state */
 426    uint64_t io_buffer_offset;
 427    int32_t io_buffer_size;
 428    QEMUSGList sg;
 429    /* PIO transfer handling */
 430    int req_nb_sectors; /* number of sectors per interrupt */
 431    EndTransferFunc *end_transfer_func;
 432    uint8_t *data_ptr;
 433    uint8_t *data_end;
 434    uint8_t *io_buffer;
 435    /* PIO save/restore */
 436    int32_t io_buffer_total_len;
 437    int32_t cur_io_buffer_offset;
 438    int32_t cur_io_buffer_len;
 439    uint8_t end_transfer_fn_idx;
 440    QEMUTimer *sector_write_timer; /* only used for win2k install hack */
 441    uint32_t irq_count; /* counts IRQs when using win2k install hack */
 442    /* CF-ATA extended error */
 443    uint8_t ext_error;
 444    /* CF-ATA metadata storage */
 445    uint32_t mdata_size;
 446    uint8_t *mdata_storage;
 447    int media_changed;
 448    enum ide_dma_cmd dma_cmd;
 449    /* SMART */
 450    uint8_t smart_enabled;
 451    uint8_t smart_autosave;
 452    int smart_errors;
 453    uint8_t smart_selftest_count;
 454    uint8_t *smart_selftest_data;
 455    /* AHCI */
 456    int ncq_queues;
 457};
 458
 459struct IDEDMAOps {
 460    DMAStartFunc *start_dma;
 461    DMAVoidFunc *pio_transfer;
 462    DMAInt32Func *prepare_buf;
 463    DMAu32Func *commit_buf;
 464    DMAIntFunc *rw_buf;
 465    DMAVoidFunc *restart;
 466    DMAVoidFunc *restart_dma;
 467    DMAStopFunc *set_inactive;
 468    DMAVoidFunc *cmd_done;
 469    DMAVoidFunc *reset;
 470};
 471
 472struct IDEDMA {
 473    const struct IDEDMAOps *ops;
 474    QEMUIOVector qiov;
 475    BlockAIOCB *aiocb;
 476};
 477
 478struct IDEBus {
 479    BusState qbus;
 480    IDEDevice *master;
 481    IDEDevice *slave;
 482    IDEState ifs[2];
 483    QEMUBH *bh;
 484
 485    int bus_id;
 486    int max_units;
 487    IDEDMA *dma;
 488    uint8_t unit;
 489    uint8_t cmd;
 490    qemu_irq irq;
 491
 492    int error_status;
 493    uint8_t retry_unit;
 494    int64_t retry_sector_num;
 495    uint32_t retry_nsector;
 496    PortioList portio_list;
 497    PortioList portio2_list;
 498    VMChangeStateEntry *vmstate;
 499};
 500
 501#define TYPE_IDE_DEVICE "ide-device"
 502OBJECT_DECLARE_TYPE(IDEDevice, IDEDeviceClass, IDE_DEVICE)
 503
 504struct IDEDeviceClass {
 505    DeviceClass parent_class;
 506    void (*realize)(IDEDevice *dev, Error **errp);
 507};
 508
 509struct IDEDevice {
 510    DeviceState qdev;
 511    uint32_t unit;
 512    BlockConf conf;
 513    int chs_trans;
 514    char *version;
 515    char *serial;
 516    char *model;
 517    uint64_t wwn;
 518    /*
 519     * 0x0000        - rotation rate not reported
 520     * 0x0001        - non-rotating medium (SSD)
 521     * 0x0002-0x0400 - reserved
 522     * 0x0401-0xffe  - rotations per minute
 523     * 0xffff        - reserved
 524     */
 525    uint16_t rotation_rate;
 526};
 527
 528/* These are used for the error_status field of IDEBus */
 529#define IDE_RETRY_MASK 0xf8
 530#define IDE_RETRY_DMA  0x08
 531#define IDE_RETRY_PIO  0x10
 532#define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */
 533#define IDE_RETRY_READ  0x20
 534#define IDE_RETRY_FLUSH 0x40
 535#define IDE_RETRY_TRIM 0x80
 536#define IDE_RETRY_HBA  0x100
 537
 538#define IS_IDE_RETRY_DMA(_status) \
 539    ((_status) & IDE_RETRY_DMA)
 540
 541#define IS_IDE_RETRY_PIO(_status) \
 542    ((_status) & IDE_RETRY_PIO)
 543
 544/*
 545 * The method of the IDE_RETRY_ATAPI determination is to use a previously
 546 * impossible bit combination as a new status value.
 547 */
 548#define IS_IDE_RETRY_ATAPI(_status)   \
 549    (((_status) & IDE_RETRY_MASK) == IDE_RETRY_ATAPI)
 550
 551static inline uint8_t ide_dma_cmd_to_retry(uint8_t dma_cmd)
 552{
 553    switch (dma_cmd) {
 554    case IDE_DMA_READ:
 555        return IDE_RETRY_DMA | IDE_RETRY_READ;
 556    case IDE_DMA_WRITE:
 557        return IDE_RETRY_DMA;
 558    case IDE_DMA_TRIM:
 559        return IDE_RETRY_DMA | IDE_RETRY_TRIM;
 560    case IDE_DMA_ATAPI:
 561        return IDE_RETRY_ATAPI;
 562    default:
 563        break;
 564    }
 565    return 0;
 566}
 567
 568static inline IDEState *idebus_active_if(IDEBus *bus)
 569{
 570    return bus->ifs + bus->unit;
 571}
 572
 573static inline void ide_set_irq(IDEBus *bus)
 574{
 575    if (!(bus->cmd & IDE_CTRL_DISABLE_IRQ)) {
 576        qemu_irq_raise(bus->irq);
 577    }
 578}
 579
 580/* hw/ide/core.c */
 581extern const VMStateDescription vmstate_ide_bus;
 582
 583#define VMSTATE_IDE_BUS(_field, _state)                          \
 584    VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
 585
 586#define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num)              \
 587    VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
 588
 589extern const VMStateDescription vmstate_ide_drive;
 590
 591#define VMSTATE_IDE_DRIVES(_field, _state) \
 592    VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
 593
 594#define VMSTATE_IDE_DRIVE(_field, _state) \
 595    VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_drive, IDEState)
 596
 597void ide_bus_reset(IDEBus *bus);
 598int64_t ide_get_sector(IDEState *s);
 599void ide_set_sector(IDEState *s, int64_t sector_num);
 600
 601void ide_start_dma(IDEState *s, BlockCompletionFunc *cb);
 602void dma_buf_commit(IDEState *s, uint32_t tx_bytes);
 603void ide_dma_error(IDEState *s);
 604void ide_abort_command(IDEState *s);
 605
 606void ide_atapi_cmd_ok(IDEState *s);
 607void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
 608void ide_atapi_dma_restart(IDEState *s);
 609void ide_atapi_io_error(IDEState *s, int ret);
 610
 611void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
 612uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
 613uint32_t ide_status_read(void *opaque, uint32_t addr);
 614void ide_ctrl_write(void *opaque, uint32_t addr, uint32_t val);
 615void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
 616uint32_t ide_data_readw(void *opaque, uint32_t addr);
 617void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
 618uint32_t ide_data_readl(void *opaque, uint32_t addr);
 619
 620int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind,
 621                   const char *version, const char *serial, const char *model,
 622                   uint64_t wwn,
 623                   uint32_t cylinders, uint32_t heads, uint32_t secs,
 624                   int chs_trans, Error **errp);
 625void ide_init2(IDEBus *bus, qemu_irq irq);
 626void ide_exit(IDEState *s);
 627int ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
 628void ide_register_restart_cb(IDEBus *bus);
 629
 630void ide_exec_cmd(IDEBus *bus, uint32_t val);
 631
 632void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
 633                        EndTransferFunc *end_transfer_func);
 634bool ide_transfer_start_norecurse(IDEState *s, uint8_t *buf, int size,
 635                                  EndTransferFunc *end_transfer_func);
 636void ide_transfer_stop(IDEState *s);
 637void ide_set_inactive(IDEState *s, bool more);
 638BlockAIOCB *ide_issue_trim(
 639        int64_t offset, QEMUIOVector *qiov,
 640        BlockCompletionFunc *cb, void *cb_opaque, void *opaque);
 641BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num,
 642                               QEMUIOVector *iov, int nb_sectors,
 643                               BlockCompletionFunc *cb, void *opaque);
 644void ide_cancel_dma_sync(IDEState *s);
 645
 646/* hw/ide/atapi.c */
 647void ide_atapi_cmd(IDEState *s);
 648void ide_atapi_cmd_reply_end(IDEState *s);
 649
 650/* hw/ide/qdev.c */
 651void ide_bus_init(IDEBus *idebus, size_t idebus_size, DeviceState *dev,
 652                  int bus_id, int max_units);
 653IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
 654
 655int ide_handle_rw_error(IDEState *s, int error, int op);
 656
 657#endif /* HW_IDE_INTERNAL_H */
 658
Hosted by Missing Link Electronics. The original LXR software by the LXR community, this experimental version by lxr@linux.no.