LXR qemu/include/hw/pci/pcie

   1/*
   2 * pcie_aer.h
   3 *
   4 * Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp>
   5 *                    VA Linux Systems Japan K.K.
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of the GNU General Public License as published by
   9 * the Free Software Foundation; either version 2 of the License, or
  10 * (at your option) any later version.
  11 *
  12 * This program is distributed in the hope that it will be useful,
  13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 * GNU General Public License for more details.
  16 *
  17 * You should have received a copy of the GNU General Public License along
  18 * with this program; if not, see <http://www.gnu.org/licenses/>.
  19 */
  20
  21#ifndef QEMU_PCIE_AER_H
  22#define QEMU_PCIE_AER_H
  23
  24#include "hw/pci/pci_regs.h"
  25
  26/* definitions which PCIExpressDevice uses */
  27
  28/* AER log */
  29struct PCIEAERLog {
  30    /* This structure is saved/loaded.
  31       So explicitly size them instead of unsigned int */
  32
  33    /* the number of currently recorded log in log member */
  34    uint16_t log_num;
  35
  36    /*
  37     * The maximum number of the log. Errors can be logged up to this.
  38     *
  39     * This is configurable property.
  40     * The specified value will be clipped down to PCIE_AER_LOG_MAX_LIMIT
  41     * to avoid unreasonable memory usage.
  42     * I bet that 128 log size would be big enough, otherwise too many errors
  43     * for system to function normaly. But could consecutive errors occur?
  44     */
  45#define PCIE_AER_LOG_MAX_DEFAULT        8
  46#define PCIE_AER_LOG_MAX_LIMIT          128
  47    uint16_t log_max;
  48
  49    /* Error log. log_max-sized array */
  50    PCIEAERErr *log;
  51};
  52
  53/* aer error message: error signaling message has only error severity and
  54   source id. See 2.2.8.3 error signaling messages */
  55struct PCIEAERMsg {
  56    /*
  57     * PCI_ERR_ROOT_CMD_{COR, NONFATAL, FATAL}_EN
  58     * = PCI_EXP_DEVCTL_{CERE, NFERE, FERE}
  59     */
  60    uint32_t severity;
  61
  62    uint16_t source_id; /* bdf */
  63};
  64
  65static inline bool
  66pcie_aer_msg_is_uncor(const PCIEAERMsg *msg)
  67{
  68    return msg->severity == PCI_ERR_ROOT_CMD_NONFATAL_EN ||
  69        msg->severity == PCI_ERR_ROOT_CMD_FATAL_EN;
  70}
  71
  72/* error */
  73struct PCIEAERErr {
  74    uint32_t status;    /* error status bits */
  75    uint16_t source_id; /* bdf */
  76
  77#define PCIE_AER_ERR_IS_CORRECTABLE     0x1     /* correctable/uncorrectable */
  78#define PCIE_AER_ERR_MAYBE_ADVISORY     0x2     /* maybe advisory non-fatal */
  79#define PCIE_AER_ERR_HEADER_VALID       0x4     /* TLP header is logged */
  80#define PCIE_AER_ERR_TLP_PREFIX_PRESENT 0x8     /* TLP Prefix is logged */
  81    uint16_t flags;
  82
  83    uint32_t header[4]; /* TLP header */
  84    uint32_t prefix[4]; /* TLP header prefix */
  85};
  86
  87extern const VMStateDescription vmstate_pcie_aer_log;
  88
  89int pcie_aer_init(PCIDevice *dev, uint8_t cap_ver, uint16_t offset,
  90                  uint16_t size, Error **errp);
  91void pcie_aer_exit(PCIDevice *dev);
  92void pcie_aer_write_config(PCIDevice *dev,
  93                           uint32_t addr, uint32_t val, int len);
  94
  95/* aer root port */
  96void pcie_aer_root_set_vector(PCIDevice *dev, unsigned int vector);
  97void pcie_aer_root_init(PCIDevice *dev);
  98void pcie_aer_root_reset(PCIDevice *dev);
  99void pcie_aer_root_write_config(PCIDevice *dev,
 100                                uint32_t addr, uint32_t val, int len,
 101                                uint32_t root_cmd_prev);
 102
 103#endif /* QEMU_PCIE_AER_H */
 104