1/* 2 * (C) Copyright 2003, Psyent Corporation <www.psyent.com> 3 * Scott McNutt <smcnutt@psyent.com> 4 * 5 * CompactFlash/IDE: 6 * (C) Copyright 2004, Shlomo Kut <skut@vyyo.com> 7 * 8 * See file CREDITS for list of people who contributed to this 9 * project. 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of 14 * the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 24 * MA 02111-1307 USA 25 */ 26 27#include <common.h> 28#include <nios-io.h> 29#if defined(CONFIG_SEVENSEG) 30#include "../common/sevenseg.h" 31#endif 32 33void _default_hdlr (void) 34{ 35 printf ("default_hdlr\n"); 36} 37 38int board_early_init_f (void) 39{ 40#if defined(CONFIG_SEVENSEG) 41 /* init seven segment led display and switch off */ 42 sevenseg_set(SEVENSEG_OFF); 43#endif 44 return 0; 45} 46 47int checkboard (void) 48{ 49 puts ("Board: Altera Nios 1C20 Development Kit\n"); 50 return 0; 51} 52 53phys_size_t initdram (int board_type) 54{ 55 return (0); 56} 57 58#if defined(CONFIG_CMD_IDE) 59int ide_preinit (void) 60{ 61 nios_pio_t *present = (nios_pio_t *) CONFIG_SYS_CF_PRESENT; 62 nios_pio_t *power = (nios_pio_t *) CONFIG_SYS_CF_POWER; 63 nios_pio_t *atasel = (nios_pio_t *) CONFIG_SYS_CF_ATASEL; 64 65 /* setup data direction registers */ 66 present->direction = NIOS_PIO_IN; 67 power->direction = NIOS_PIO_OUT; 68 atasel->direction = NIOS_PIO_OUT; 69 70 /* Check for presence of card */ 71 if (present->data) 72 return 1; 73 printf ("Ok\n"); 74 75 /* Finish setup */ 76 power->data = 1; /* Turn on power FET */ 77 atasel->data = 0; /* Put in ATA mode */ 78 79 return 0; 80} 81#endif 82