LXR uboot/board/amcc/acadia/acadia.c

   1/*
   2 * (C) Copyright 2007
   3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4 *
   5 * See file CREDITS for list of people who contributed to this
   6 * project.
   7 *
   8 * This program is free software; you can redistribute it and/or
   9 * modify it under the terms of the GNU General Public License as
  10 * published by the Free Software Foundation; either version 2 of
  11 * the License, or (at your option) any later version.
  12 *
  13 * This program is distributed in the hope that it will be useful,
  14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 * GNU General Public License for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software
  20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 * MA 02111-1307 USA
  22 */
  23
  24#include <common.h>
  25#include <asm/processor.h>
  26
  27extern void board_pll_init_f(void);
  28
  29static void acadia_gpio_init(void)
  30{
  31        /*
  32         * GPIO0 setup (select GPIO or alternate function)
  33         */
  34        out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
  35        out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH);       /* output select */
  36        out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
  37        out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H);     /* input select */
  38        out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
  39        out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH);       /* three-state select */
  40        out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR);  /* enable output driver for outputs */
  41
  42        /*
  43         * Ultra (405EZ) was nice enough to add another GPIO controller
  44         */
  45        out32(GPIO1_OSRH, CONFIG_SYS_GPIO1_OSRH);       /* output select */
  46        out32(GPIO1_OSRL, CONFIG_SYS_GPIO1_OSRL);
  47        out32(GPIO1_ISR1H, CONFIG_SYS_GPIO1_ISR1H);     /* input select */
  48        out32(GPIO1_ISR1L, CONFIG_SYS_GPIO1_ISR1L);
  49        out32(GPIO1_TSRH, CONFIG_SYS_GPIO1_TSRH);       /* three-state select */
  50        out32(GPIO1_TSRL, CONFIG_SYS_GPIO1_TSRL);
  51        out32(GPIO1_TCR, CONFIG_SYS_GPIO1_TCR);  /* enable output driver for outputs */
  52}
  53
  54int board_early_init_f(void)
  55{
  56        unsigned int reg;
  57
  58#if !defined(CONFIG_NAND_U_BOOT)
  59        /* don't reinit PLL when booting via I2C bootstrap option */
  60        mfsdr(SDR_PINSTP, reg);
  61        if (reg != 0xf0000000)
  62                board_pll_init_f();
  63#endif
  64
  65        acadia_gpio_init();
  66
  67        /* Configure 405EZ for NAND usage */
  68        mtsdr(sdrnand0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
  69        mfsdr(sdrultra0, reg);
  70        reg &= ~SDR_ULTRA0_CSN_MASK;
  71        reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) |
  72                SDR_ULTRA0_NDGPIOBP |
  73                SDR_ULTRA0_EBCRDYEN |
  74                SDR_ULTRA0_NFSRSTEN;
  75        mtsdr(sdrultra0, reg);
  76
  77        /* USB Host core needs this bit set */
  78        mfsdr(sdrultra1, reg);
  79        mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE);
  80
  81        mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
  82        mtdcr(uicer, 0x00000000);       /* disable all ints */
  83        mtdcr(uiccr, 0x00000010);
  84        mtdcr(uicpr, 0xFE7FFFF0);       /* set int polarities */
  85        mtdcr(uictr, 0x00000010);       /* set int trigger levels */
  86        mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
  87
  88        return 0;
  89}
  90
  91int misc_init_f(void)
  92{
  93        /* Set EPLD to take PHY out of reset */
  94        out8(CONFIG_SYS_CPLD_BASE + 0x05, 0x00);
  95        udelay(100000);
  96
  97        return 0;
  98}
  99
 100/*
 101 * Check Board Identity:
 102 */
 103int checkboard(void)
 104{
 105        char *s = getenv("serial#");
 106        u8 rev;
 107
 108        rev = in8(CONFIG_SYS_CPLD_BASE + 0);
 109        printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
 110
 111        if (s != NULL) {
 112                puts(", serial# ");
 113                puts(s);
 114        }
 115        putc('\n');
 116
 117        return (0);
 118}
 119