commit f9476902b789b0481b9df49af88d6ca94fb16fa0
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Tue Dec 15 12:10:47 2009 -0600

    mpc85xx, mpc86xx: Fix gd->cpu pointer after relocation

    The gd->cpu pointer is set to an address located in flash when the
    probecpu() function is called while U-Boot is executing from flash.
    This pointer needs to be updated to point to an address in RAM after
    relocation has occurred otherwise Linux may not be able to boot due to
    "fdt board" crashing if flash has been erased or changed.

    This bug was introduced in commit
    a0e2066f392782730f0398095e583c87812d97f2.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Reported-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Tested-by: Kumar Gala <galak@kernel.crashing.org>
    Tested on MPC8527DS.
    Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit 3363a34b9eeda9783afcbbed5cdd738926d1f4bf
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Sun Dec 13 17:58:34 2009 -0600

    MVBLUE: Remove CONFIG_CMD_IRQ

    Neither the MVBLUE nor its underlying architecture implement the
    do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined.
    This change fixes the following MVBLUE compiler error:

    -> ./MAKEALL MVBLUE
    Configuring for MVBLUE board...
    common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo'
    make: *** [u-boot] Error 1

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

commit 18e8ad60ee87431c01cc2686985b60cc54f5dd3b
Author: Detlev Zundel <dzu@denx.de>
Date:   Mon Dec 14 17:54:40 2009 +0100

    imx27lite: Reenable MTD support on NOR flash.

    The support for this was silently dropped by a configuration
    split during the merge of the imx27lite board support in commit
    864aa034f3a0e10ce710e8bbda171df3cab59414 (cmd_mtdparts: Move to common
    handling of FLASH devices via MTD layer).

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit f4cfe42758192d09f8375e384cc000aa70d97029
Author: Stefan Roese <sr@denx.de>
Date:   Wed Dec 9 09:01:43 2009 +0100

    nand: Fix access to last block in NAND devices

    Currently, the last block of NAND devices can't be accessed. This patch
    fixes this issue by correcting the boundary checking (off-by-one error).

    Signed-off-by: Stefan Roese <sr@denx.de>
    Cc: Scott Wood <scottwood@freescale.com>
    Cc: Wolfgang Denk <wd@denx.de>

commit 3b887ca8ce72cc12129183538f6e828db13f4867
Author: Peter Korsgaard <jacmet@sunsite.dk>
Date:   Tue Dec 8 22:20:34 2009 +0100

    mpc83xx: boot time regression, move LCRR setup back to cpu_init_f

    Commit c7190f02 (retain POR values of non-configured ACR, SPCR, SCCR,
    and LCRR bitfields) moved the LCRR assignment to after relocation
    to RAM because of the potential problem with changing the local bus
    clock while executing from flash.

    This change unfortunately adversely affects the boot time, as running
    all code up to cpu_init_r can cause significant slowdown.

    E.G. on a 8347 board a bootup time increase of ~600ms has been observed:

       0.020 CPU:   e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
       0.168 RS:    232
       0.172 I2C:   ready
       0.176 DRAM:  64 MB
       1.236 FLASH: 32 MB

    Versus:

       0.016 CPU:   e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
       0.092 RS:    232
       0.092 I2C:   ready
       0.096 DRAM:  64 MB
       0.644 FLASH: 32 MB

    So far no boards have needed the late LCRR setup, so simply revert it
    for now - If it is needed at a later time, those boards can either do
    their own final LCRR setup in board code (E.G. in board_early_init_r),
    or we can introduce a CONFIG_SYS_LCRR_LATE config option to only do
    the setup in cpu_init_r.

    Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 386118a896554b13f14ad0f82356276988f7de82
Author: Michal Simek <monstr@monstr.eu>
Date:   Tue Dec 8 09:12:49 2009 +0100

    microblaze: Correct ffs regression for Microblaze

    We are using generic implementation of ffs. This should
    be part of Simon's commit 0413cfecea350000eab5e591a0965c3e3ee0ff00

    Here is warning message which this patch removes.

    In file included from /tmp/u-boot-microblaze/include/common.h:38,
                     from cmd_mtdparts.c:87:
    /tmp/u-boot-microblaze/include/linux/bitops.h:123:1: warning: "ffs" redefined
    In file included from /tmp/u-boot-microblaze/include/linux/bitops.h:110,
                     from /tmp/u-boot-microblaze/include/common.h:38,
                     from cmd_mtdparts.c:87:
    /tmp/u-boot-microblaze/include/asm/bitops.h:269:1:
    warning: this is the location of the previous definition

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 8fe7b29f9811322931f0192a56431edcf819d6b9
Author: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
Date:   Mon Dec 7 08:09:57 2009 -0800

    microblaze: Stop stack clobbering in microblaze-generic.

    A typo caused the stack and malloc regions to overlap, which prevented
    mem_malloc_init() from returning. This commit makes the memory layout match
    the example described in include/configs/microblaze-generic.h

    Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 0fc52948bda0734431cb528ee4fd82f1dec8c7b5
Author: Wolfgang Denk <wd@denx.de>
Date:   Mon Dec 7 23:14:13 2009 +0100

    Update CHANGELOG, prepare -rc2

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f2352877cb2daac88115192fb09991a2397d0b27
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Sun Dec 6 23:58:28 2009 -0600

    MAKEALL: Fix return value

    Previously MAKEALL would always return a value of 0, even if 1 or more
    boards did not compile.  This change causes MAKEALL to return 0 if all
    boards were able to build, otherwise 1.

    This change also requires changing the script interpreter from sh to
    bash to support bash's PIPESTATUS variable.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit fbc1c8f6f6c972524197829c56dd8f2f5da0200a
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Sun Dec 6 01:33:24 2009 -0600

    tools/mkimage: Remove duplicate line of code

    Recent commits 1a99de2cb4d08eb3bf9fb3f60a9d533150de8c0e and
    6a590c5f5fd12cdd27f3153522acfac3854590e7 both fixed the same bug in the
    same manner.  Unfortunately git was "smart" enough to merge both changes
    which resulted in some duplicate code.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

    Reordered code and comment a bit.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit df002fa6b9cd475909ede35bf95b803c2289c6a4
Author: Heiko Schocher <hs@denx.de>
Date:   Sat Dec 5 11:59:51 2009 +0100

    i2c: fix dangling comment in do_i2c_mw()

    commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b deleted some unused
    code in do_i2c_mw(), but missed to also remove the respective
    commment. This patch fixes this.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit f8450829f921cf10667af98a8d08edfa3d998f04
Author: Heiko Schocher <hs@denx.de>
Date:   Tue Dec 1 19:30:47 2009 +0100

    52xx, manroland: add fdt_fixup_memory() in ft_board_setup()

    To update the real memory size in the memory node on the
    uc101 and mucmc52 boards call fdt_fixup_memory() in
    ft_board_setup().

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 0ec81db20294efdad2454a753e79f1fe244a43ca
Author: Daniel Hobi <daniel.hobi@schmid-telecom.ch>
Date:   Tue Dec 1 14:05:55 2009 +0100

    Fix computation in nand_util.c:get_len_incl_bad

    Depending on offset, flash size and the number of bad blocks,
    get_len_incl_bad may return a too small value which may lead to:

    1) If there are no bad blocks, nand_{read,write}_skip_bad chooses the
    bad block aware read/write code. This may hurt performance, but does
    not have any adverse effects.

    2) If there are bad blocks, the nand_{read,write}_skip_bad may choose
    the bad block unaware read/write code (if len_incl_bad == *length)
    which leads to corrupted data.

    Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch>

commit aabb8cb0818e285aeed0cfaf243635997e07554d
Author: Evan Samanas <esamanas@xes-inc.com>
Date:   Mon Nov 9 20:08:36 2009 -0600

    nfs: NfsTimeout() updates

    - NfsTimeout() does not correctly update the NFS timeout value which
      results in NfsTimeout() only being called once in certain situations.
      This can result in the 'nfs' command hanging indefinetly.  For
      example, the command:

        nfs 192.168.0.1:/home/user/file

      will not exit until ctrl-c is pressed if 192.168.0.1 does not have an
      NFS server running.

      This issue is resolved by reinitializting the NFS timeout value inside
      NfsTimeout() when a timeout occurs.

    - Make the 'nfs' command print the 'T' character when a timeout occurs.
      Previously there was no indication that timeouts were occuring.

    - Mimic the 'tftpboot' command and when a download fails print "Retry
      count exceeded; starting again", and restart the download taking the
      'netretry' environment variable into account.

    Signed-off-by: Evan Samanas <esamanas@xes-inc.com>
    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

    Tested on TQM8xxL.

    Tested by: Wolfgang Denk <wd@denx.de>

    Tested on MPC8527DS.

    Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit 224c90d1060bf1a83cbf33ca51d060b9d19e0294
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Wed Nov 18 19:08:59 2009 -0600

    bootm: Fix help message's sub-command ordering

    The help message for the 'bootm' command listed the 'cmdline' and 'bdt'
    sub-commands in the wrong order which resulted in the error below when
    following the 'help' command's instructions:

      "Trying to execute a command out of order"

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit a93c92cddaedd5f0720e0da15c6664f7a688b582
Author: Robert P. J. Day <rpjday@crashcourse.ca>
Date:   Tue Nov 17 07:30:23 2009 -0500

    help: Correct syntax of nandecc help output.

    "nandecc" help output should not reproduce the command name, nor have
    a trailing newline.

    Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

commit c2fff331a32ceca837d76eb7827d6340da270d52
Author: Mike Rapoport <mike@compulab.co.il>
Date:   Wed Nov 11 10:03:03 2009 +0200

    smc911x: update SMC911X related configuration description

    Since commit 736fead8fdbf8a8407048bebc373cd551d01ec98 "Convert SMC911X
    Ethernet driver to CONFIG_NET_MULTI API" SMC911X configration options
    are called CONFIG_SMC911X rather than CONFIG_DRIVER_SMC911X. Update
    README to reflect that change.

    Signed-off-by: Mike Rapoport <mike@compulab.co.il>

commit 45b6b65c6bf06a589ef3123192af94b0381db27b
Author: Mike Rapoport <mike@compulab.co.il>
Date:   Wed Nov 11 10:03:09 2009 +0200

    smc911x: fix typo in smc911x_handle_mac_address name

    Signed-off-by: Mike Rapoport <mike@compulab.co.il>

commit f64ef9bb995687e24e0b61b52316f4eaa97c3bbc
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:   Thu Nov 19 02:47:28 2009 -0600

    fix nfs symlink name corruption

    An off by one error may cause nfs readlink lookup fail if
    nfs_path_buff has non-zero data from a previous use.

    Loading: *** ERROR: File lookup fail

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>

commit e8fac25e83426fdf461c66aa8a2530ec28ec536e
Author: Wolfgang Denk <wd@denx.de>
Date:   Mon Dec 7 21:06:40 2009 +0100

    at91sam9261ek.c: fix minor coding style issue.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4713010adf5beda87410d637ebfc58db0db9a9db
Author: Wolfgang Denk <wd@denx.de>
Date:   Sun Dec 6 01:21:28 2009 +0100

    trab: fix warning: implicit declaration of function 'disable_vfd'

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a9f99ab44b473fb394169ba365f8b4380f981584
Author: Wolfgang Denk <wd@denx.de>
Date:   Sun Dec 6 00:53:18 2009 +0100

    zlib.c: avoid build conflicts for cradle board

    Commit dce3d79710 updated the zlib code to v0.95; this caused
    conflicts when building for the "cradle" board, because the (pretty
    generic) preprocessor variable "OFF" was used in multiple files.
    Make sure to avoid further conflicts by #undef'ing it in zlib.c
    before redefining it.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    cc: Giuseppe Condorelli <giuseppe.condorelli@st.com>
    cc: Angelo Castello <angelo.castello@st.com>
    cc: Alessandro Rubini <rubini-list@gnudd.com>

commit 8cbf4e4f17121d732e78764f0ba317c9a1838ea6
Author: Wolfgang Denk <wd@denx.de>
Date:   Sun Dec 6 00:26:19 2009 +0100

    Fix out-of-tree building of "apollon" board.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f68ab43de67f59925542efb6bcec30f4a84fe695
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Fri Dec 4 05:35:15 2009 -0500

    lzma: ignore unset filesizes

    The Linux kernel build system changed how it compresses things with LZMA
    such that the header no longer contains the filesize (it is instead set to
    all F's).  So if we get a LZMA image that has -1 for the 64bit field,
    let's just assume that the decompressed size is unknown and continue on.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit cccfc2ab77877dbdd2abe26b28d4c1f467feb0c0
Author: Detlev Zundel <dzu@denx.de>
Date:   Tue Dec 1 17:16:19 2009 +0100

    README: Rearrange paragraphs to regain linear arrangement.

    Two later additions to the Configuration Option section unfortunately
    split the description of Show boot progress and the list of its call outs.

    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit c81296c16fd9d12422c9968cc0f1d9bf440a7d88
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Tue Nov 24 16:42:10 2009 -0600

    tools/mkimage: Print FIT image contents after creation

    Previously, there was no indication to the user that a FIT image was
    successfully created after executing mkimage.  For example:

      $ mkimage -f uImage.its uImage.itb
      DTC: dts->dtb  on file "uImage.its"

    Adding some additional output after creating a FIT image lets the user
    know exactly what is contained in their image, eg:

      $ mkimage -f uImage.its uImage.itb
      DTC: dts->dtb  on file "uImage.its"
      FIT description: Linux kernel 2.6.32-rc7-00201-g7550d6f-dirty
      Created:         Tue Nov 24 15:43:01 2009
       Image 0 (kernel@1)
        Description:  Linux Kernel 2.6.32-rc7-00201-g7550d6f-dirty
        Type:         Kernel Image
        Compression:  gzip compressed
        Data Size:    2707311 Bytes = 2643.86 kB = 2.58 MB
        Architecture: PowerPC
        OS:           Linux
        Load Address: 0x00000000
        Entry Point:  0x00000000
        Hash algo:    crc32
        Hash value:   efe0798b
        Hash algo:    sha1
        Hash value:   ecafba8c95684f2c8fec67e33c41ec88df1534d7
       Image 1 (fdt@1)
        Description:  Flattened Device Tree blob
        Type:         Flat Device Tree
        Compression:  uncompressed
        Data Size:    12288 Bytes = 12.00 kB = 0.01 MB
        Architecture: PowerPC
        Hash algo:    crc32
        Hash value:   a5cab676
        Hash algo:    sha1
        Hash value:   168722b13e305283cfd6603dfe8248cc329adea6
       Default Configuration: 'config@1'
       Configuration 0 (config@1)
        Description:  Default Linux kernel
        Kernel:       kernel@1
        FDT:          fdt@1

    This brings the behavior of creating a FIT image in line with creating a
    standard uImage, which also prints out the uImage contents after
    creation.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 8e1c89663cc8796b85588910046e03b388a7597c
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Tue Nov 24 16:42:09 2009 -0600

    tools/fit_image.c: Remove unused fit_set_header()

    The FIT fit_set_header() function was copied from the standard uImage's
    image_set_header() function during mkimage reorganization.  However, the
    fit_set_header() function is not used since FIT images use a standard
    device tree blob header.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 1a99de2cb4d08eb3bf9fb3f60a9d533150de8c0e
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Tue Nov 24 16:42:08 2009 -0600

    tools/mkimage: Assume FDT image type for FIT images

    When building a Flattened Image Tree (FIT) the image type needs to be
    "flat_dt".  Commit 89a4d6b12fd6394898b8a454cbabeaf1cd59bae5 introduced a
    regression which caused the user to need to specify the "-T flat_dt"
    parameter on the command line when building a FIT image.  The "-T
    flat_dt" parameter should not be needed and is at odds with the current
    FIT image documentation.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 270737acca21f3939f814de5dcf350a1c3d80d83
Author: Michael Brandt <Michael.Brandt@emsyso.de>
Date:   Sun Nov 22 14:13:27 2009 +0100

    EXT2FS: fix inode size for ext2fs rev#0

    extfs.c assumes that there is always a valid inode_size field in the
    superblock. But this is not true for ext2fs rev 0. Such ext2fs images
    are for instance generated by genext2fs. Symptoms on ARM machines are
    messages like: "raise: Signal # 8 caught"; on PowerPC "ext2ls" will
    print nothing.
    This fix checks for rev 0 and uses then 128 bytes as inode size.

    Signed-off-by: Michael Brandt <Michael.Brandt@emsyso.de>
    Tested on: TQM5200S
    Tested-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit bcb324d68f7955c1136dafc944eb55db8ebaa601
Author: Robert P. J. Day <rpjday@crashcourse.ca>
Date:   Thu Nov 19 11:00:28 2009 -0500

    Remove superfluous preprocessor tests from some cmd_*.c files.

    A small number of common/cmd_*.c files contain preprocessor tests that
    are apparently superfluous since those same tests are used in the
    Makefile to control the compilation of those files.  Those tests are
    clearly redundant as long as they surround the entirety of the source
    in those files.

    Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

commit ad53226156fa64b6d04c0d1d6e91e09979cbea15
Author: Robert P. J. Day <rpjday@crashcourse.ca>
Date:   Tue Nov 17 01:59:29 2009 -0500

    README: Update the list of directories.

    Bring the directory listing more into line with current content.

    Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b
Author: Pratap Chandu <pratap.rrke@gmail.com>
Date:   Thu Nov 12 19:28:25 2009 +0530

    Removes dead code in the file common/cmd_i2c.c

    There is some dead code enclosed by #if 0 .... #endif in the file
    common/cmd_i2c.c
    This patch removes the dead code.

    Signed-off-by: Pratap Chandu <pratap.rrke@gmail.com>

commit 64a480601a5614b441de692ae15a62c51e0bb381
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Nov 11 17:51:56 2009 -0500

    smc91111_eeprom: drop CONFIG stub protection

    Since the Makefile now controls the compilation of this, there is no need
    for CONFIG checking nor the stub function.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit f3a7bddc06c927c36a1a99a97131299479ef207a
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:   Wed Nov 11 19:56:58 2009 +0100

    RTC: Fix return code in MC13783 RTC driver.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit d52e3e0176a74c30549251e16c5c00a363c544d2
Author: Magnus Lilja <lilja.magnus@gmail.com>
Date:   Wed Nov 11 19:56:36 2009 +0100

    cmd_date: Fix spelling in error message.

    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

commit c253122395753abb9e531d8906c5265dc8803fb1
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Wed Nov 11 10:36:28 2009 -0600

    Move do_irqinfo() to common/cmd_irq.c

    cmd_irq.c is a much better home and it is already conditionally
    compiled based on CONFIG_CMD_IRQ.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit a5dd4dc64fe68e549c5ffcf6a048281b5ba94752
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Wed Nov 11 10:36:19 2009 -0600

    cmd_license: Remove unneeded #ifdef CONFIG_CMD_LICENSE

    cmd_license is already conditionally compiled at the Makefile-level.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 06015146a15adc7455440c491d543f6a8091551d
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Nov 9 15:18:52 2009 -0600

    m41t11: Remove unused functions

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 9ef78511cda39987e5fc10febf386fd19f58ecf7
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Nov 9 15:17:50 2009 -0600

    circbuf: Move to lib_generic and conditionally compile

    circbuf could be used as a generic library and is only currently
    needed when CONFIG_USB_TTY is defined.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 604f7ce55ad74694ef8743ad2e99933dc0265e46
Author: Sanjeev Premi <premi@ti.com>
Date:   Mon Nov 9 22:43:00 2009 +0530

    Fix build failure in examples/standalone

    Some versions of 'make' do not handle trailing white-spaces
    properly. Trailing spaces in ELF causes a 'fake' source to
    be added to the variable COBJS; leading to build failure
    (listed below). The problem was found with GNU Make 3.80.

    Using text-function 'strip' as a workaround for the problem.

    make[1]: Entering directory `/home/sanjeev/u-boot/examples/standalone'
    arm-none-linux-gnueabi-gcc -g  -Os   -fno-common -ffixed-r8 -msoft-float
    -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanjeev/u-boot/include
    -fno-builtin -ffreestanding -nostdinc -isystem /opt/codesourcery/2009q1-
    203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/include -pipe  -DCONFIG_
    ARM -D__ARM__ -marm  -mabi=aapcs-linux -mno-thumb-interwork -march=armv5
    -Wall -Wstrict-prototypes -fno-stack-protector -g  -Os   -fno-common -ff
    ixed-r8 -msoft-float   -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanje
    ev/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/co
    desourcery/2009q1-203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/includ
    e -pipe  -DCONFIG_ARM -D__ARM__ -marm  -mabi=aapcs-linux -mno-thumb-inte
    rwork -march=armv5 -I.. -Bstatic -T u-boot.lds  -Ttext 0x80e80000 -o .c
    arm-none-linux-gnueabi-gcc: no input files
    make[1]: *** [.c] Error 1
    make[1]: Leaving directory `/home/sanjeev/u-boot/examples/standalone'
    make: *** [examples/standalone] Error 2
    premi #

    Signed-off-by: Sanjeev Premi <premi@ti.com>

    Fixed typo (s/ElF/ELF/).
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit af860962b544ddf323c4ff68454f00d31e44df0a
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:   Wed Nov 4 18:30:08 2009 -0600

    85xx: Remove unused CONFIG_ASSUME_AMD_FLASH from config files

    A bunch of the 85xx boards have this cruft in them - it's not used
    anywhere.  Delete it.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>

commit deec1fbd4f704dded2e668bb9e368631981ea139
Author: Wolfgang Denk <wd@denx.de>
Date:   Wed Dec 2 22:26:30 2009 +0100

    MAINTAINERS: update responsible for MPC85xx/86xx

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Kumar Gala <galak@kernel.crashing.org>
    Cc: Becky Bruce <beckyb@kernel.crashing.org>

commit 824d82997fbcf28e49081d36fdd5d3be1b92b03d
Author: Ira W. Snyder <iws@ovro.caltech.edu>
Date:   Wed Nov 4 13:37:59 2009 -0800

    Fix example FIT image source files

    The example FIT image source files do not compile with the latest dtc and
    mkimage. The following error message is produced:

    DTC: dts->dtb  on file "kernel.its"
    Error: kernel.its 7:0 - 1:0 syntax error
    FATAL ERROR: Unable to parse input tree
    ./mkimage: Can't read kernel.itb.tmp: Invalid argument

    The FIT image source files are missing the "/dts-v1/;" directive at the
    beginning of the file. Add the directive to the examples.

    Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>

commit fd66066ee3ce15c2966feb9b2be0f0d51a95db48
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Nov 4 16:13:19 2009 -0500

    img2srec: use standard types

    The img2srec code creates a lot of typedefs with common names.  These
    easily clash with system headers that include these typedefs (like mingw).

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 8204e068110e8abe5db9c3b7df9971b58cda8f26
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Nov 4 16:03:25 2009 -0500

    tools: gitignore *.exe binaries

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 425d3b666eee5c58fdb82fb894a535dd71782a05
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Tue Nov 3 23:31:07 2009 -0600

    ppc: Move conditional compilation of kgdb.c to Makefile

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit e06ab6546b332acc55ac4e7c31338662328b0fb3
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Tue Nov 3 11:36:39 2009 -0500

    spi_flash.h: pull in linux/types.h for u## types

commit 0008555f4d57c15ad86ee735861ca0d783042f61
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Tue Nov 3 11:36:26 2009 -0500

    bootm: mark local boot_os[] table static

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit a8fa379d47f06c7d3ed75c8fb26ae43ee38e1fd7
Author: Nishanth Menon <nm@ti.com>
Date:   Mon Nov 2 09:40:18 2009 -0600

    mkconfig: deny messed up ARCH definition

    Refuse to setup a platform if the command line ARCH= is not the same
    as the one required for the board. This prevents any user with
    prehistoric aliases from messing up their builds.

    Reported in thread:
    http://old.nabble.com/-U-Boot--Build-breaks-on-some-OMAP3-configs-to26132721.html

    Inputs from: Mike Frysinger and Wolfgang Denk:
    http://lists.denx.de/pipermail/u-boot/2009-November/063642.html

    Cc: Wolfgang Denk <wd@denx.de>
    Cc: Mike Frysinger <vapier@gentoo.org>
    Cc: Anand Gadiyar <gadiyar@ti.com>
    Cc: Dirk Behme <dirk.behme@googlemail.com>
    Signed-off-by: Nishanth Menon <nm@ti.com>

commit 67b96e87da1b84660fa1e5b78cc760246d116814
Author: Remy Bohmer <linux@bohmer.net>
Date:   Wed Oct 28 22:13:39 2009 +0100

    Repair the 'netretry=once' option.

    'netretry = once' does the same as 'netretry = yes', because it is not stored
    when it was tried once.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit b25e38fc36e13fa8037fa4d37fe909d1d6e6f372
Author: Remy Bohmer <linux@bohmer.net>
Date:   Thu Oct 29 14:24:22 2009 +0100

    Repair build fail in case CONFIG_PPC=n and CONFIG_FIT=y

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 01826abc02ce160501534788e63629ccbe31b05c
Author: Grazvydas Ignotas <notasas@gmail.com>
Date:   Thu Nov 12 11:46:07 2009 +0200

    OMAP3: pandora: fix booting without serial attached

    When the board is booted without serial cable attached (which
    is how most of them will be used) UART RX is left floating and
    sometimes picks noise, which interrupts countdown and enters
    U-Boot prompt instead of booting the kernel.

    Fix this by setting up internal pullup on UART RX pin. This
    does not prevent serial from working as the internal pullup
    is weak.

    Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>

commit 41dfd8a60324243dbe2dc313a607910824a68aa7
Author: Remy Bohmer <linux@bohmer.net>
Date:   Wed Oct 28 22:13:37 2009 +0100

    Add support for CS2 dataflash for Atmel-SPI.

    The only missing chipselect line support is CS2, and I need it on
    CS2...

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit faf36c1437c95e4a86835633d9801c5f6396a3c7
Author: Remy Bohmer <linux@bohmer.net>
Date:   Wed Oct 28 22:13:36 2009 +0100

    Fix mingw tools build

    mkimage does not build due to missing strtok_r() and getline() implementation

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 6a590c5f5fd12cdd27f3153522acfac3854590e7
Author: Remy Bohmer <linux@bohmer.net>
Date:   Wed Oct 28 22:13:35 2009 +0100

    Building of FIT images does not work.

    The type is not set for generation of the FIT images, resulting
    in no images being created without printing or returning an error

    Signed-off-by: Remy Bohmer <linux@bohmer.net>

commit 0a7691e820e33b23f61c6ea0ef6fa72099d1a6ae
Author: Renato Andreola <renato.andreola@imagos.it>
Date:   Mon Nov 23 16:45:14 2009 -0500

    Nios2: do_boom_linux(): kernel gunzip input data integrity problem due to
        missing cache flush.

        Added instruction and data caches flush.

    Signed-off-by: Scott McNutt <smcnutt@psyent.com>

commit de03825386eaedb5e17261dd87cde86e9a764ba9
Author: Scott McNutt <smcnutt@psyent.com>
Date:   Mon Nov 23 16:29:40 2009 -0500

    Nios2: Fix compiler warnings in lib_nios2/board.c (unused variables)

    Signed-off-by: Scott McNutt <smcnutt@psyent.com>

commit 57baa379cf2f67df89a5c6052767fd25daff20bd
Author: Scott McNutt <smcnutt@psyent.com>
Date:   Mon Nov 23 15:54:25 2009 -0500

    Nios2/Nios: Remove unnecessary (residual) linker Nios command scripts from
        the standalone examples.

    Signed-off-by: Scott McNutt <smcnutt@psyent.com>

commit fcffb680e77fcb48598d4a9944dbe2d4503170e0
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Oct 14 19:28:03 2009 -0400

    sf: fix stmicro offset setup while erasing

    Reported-by: Peter Gombos <gombos@protecta.hu>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit d394a7795027d96ca55799df40bd5c4a13dbeebe
Author: Jason McMullan <mcmullan@netapp.com>
Date:   Fri Oct 9 17:12:23 2009 -0400

    sf: new driver for Winbond W25X16/32/64 devices

    Signed-off-by: Jason McMullan <jason.mcmullan@gmail.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit cada315100c88894b85972a91309a6f2413966b6
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:   Thu Oct 1 23:55:17 2009 +0200

    mpc8260: move FDT memory node fixup into common CPU code.

    Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
    Tested-by: Heiko Schocher <hs@denx.de>

commit f2cea405f83da46b72098ea874fb3eefe185d312
Author: Po-Yu Chuang <ratbert.chuang@gmail.com>
Date:   Wed Sep 23 15:52:35 2009 +0800

    Add driver for FTRTC010 real time clock

    Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>

    Edited commit message.
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c0356a88011330646e960dfac8a2c909bede3304
Author: Mark Jackson <mpfj-list@mimc.co.uk>
Date:   Mon Aug 17 16:42:52 2009 +0100

    MIMC200: set default fbmem value

    This patch adds a default bootargs "fbmem" value to the
    CONFIG_BOOTARGS string for the MIMC200 board.

    Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>

commit 3ffc0d61bad7d986e344ce7062b37c5c8f04fb0e
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:   Tue Oct 27 19:58:09 2009 +0100

    ppc4xx: Initialize magnetic coupler on VOM405 boards

    This patch fixes an ugly behavior of the IL712 magnetic coupler
    as used on VOM405. These parts will remember their last state
    over a power cycle which might cause unwanted behavior.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit be0db3e3141c6c6b4e232b51091f35a284cc54e5
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:   Mon Oct 26 09:58:45 2009 +0100

    ppc4xx: Initialize magnetic couplers in PLU405

    This patch fixes an ugly behavior of the IL712 magnetic couplers
    as used on PLU405. These parts will remember their last state
    over a power cycle which might cause unwanted behavior.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 067f54c66acd469870ef6946e1591bfcc02de1b3
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:   Mon Oct 26 09:55:40 2009 +0100

    Add minimal SJA1000 header for basic CAN mode

    This patch is in preparation for the upcoming PLU405 board fix.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit cdbdbe65f5f006cba208accee5a126c659d4b867
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Fri Nov 13 08:52:21 2009 -0600

    ppc/85xx: Fix how we determine the number of CAM entries

    We were incorrectly use the max CAM size as the number of entries in
    the array for setting up the addrmap.  We should be using the NENTRY
    field which is the low 12-bits of TLB1CFG.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit fbd47b6753b08162436d9ccad1e63c8d43ede54c
Author: Mike Rapoport <mike@compulab.co.il>
Date:   Thu Nov 12 15:35:08 2009 +0200

    smc911x: make smc911x_initialize return correct value

    Make smc911x_initialize return -1 on error and number of interfaces
    detected otherwise.

    Signed-off-by: Mike Rapoport <mike@compulab.co.il>
    Acked-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit c44efcf97b335dcef7d014f65b7d3094e79adb13
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Thu Nov 12 22:26:02 2009 -0500

    smc911x_eeprom: fix building after smc911x overhaul

    When the smc911x driver was converted to NET_MULTI, the smc911x eeprom was
    missed.  The config option needed updating as well as overhauling of the
    rergister read/write functions.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Tested-by: Mike Rapoport <mike.rapoport@gmail.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 3ad95deb30ac73bd57e966d321215a17d3236f9f
Author: Dave Liu <daveliu@freescale.com>
Date:   Thu Nov 12 07:26:37 2009 +0800

    fsl-ddr: Fix the chip-select interleaving issue

    commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3
    introduced one new bug to chip-select interleaving.

    Single DDR controller also can do the chip-select
    interleaving if there is dual-rank or qual-rank DIMMs.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 651ef90fa6ca824c8e581aeef9e04bbbe7f7e9ce
Author: javier Martin <javier.martin@vista-silicon.com>
Date:   Thu Oct 29 08:22:43 2009 +0100

    mxc_fec: avoid free() calls to already freed pointers.

    Sometimes, inside NetLoop, eth_halt() is called before eth_init() has
    been called. This is harmless except for free() calls to pointers
    which have not been allocated yet.

    This patch initializes those pointers to NULL and allocates them only
    the first time. This way we can get rid of free calls in halt callback.

    This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains.

    Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit e8f1546a88b4ade6a910c4a7958a774ee1b40023
Author: javier Martin <javier.martin@vista-silicon.com>
Date:   Thu Oct 29 08:18:34 2009 +0100

    mxc_fec: fix some erroneous PHY accesses.

    This patch fixes erroneous access to the ethernet PHY which broke the driver.
    1. Selector field in the auto-negotiation register must be 0x00001 for
    using 802.3, not 0x00000 which is reseved.
    2. Access to the PHY address specified by CONFIG_FEC_MXC_PHYADDR, not
    0x0 fixed address.

    This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains.

    Now using proper defines for auto-negotiation register.

    Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit f865fcbbb35851e75fee9c3a3fa8e0f71d9e6463

Author: Ron Lee <ron@debian.org>
Date:   Wed Aug 5 20:14:01 2009 +0200

    ARM Don't inline weak symbols

    ------------------------------------------------------------------------

    GCC 4.4 complains about this now.

    Signed-off-by: Ron Lee <ron@debian.org>

commit d14c7ec2b51fb92c4a5218b299b772c3d186510d
Author: Ben Warren <biggerbadderben@gmail.com>
Date:   Mon Nov 9 13:09:57 2009 -0800

    Fix SMC91111 regression: lpd7a40x build failures

    Both lpd7a400 and lpd7a404 failed to compile because they had
    CONFIG_SMC_USE_IOFUNCS defined:

    examples/standalone/smc91111_eeprom.c:388: undefined reference to `SMC_outw'

    Also removed an orphaned paren in lpd7a404.h

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 1031ae960ce6ce8332190278a06e2d72c2b2793e
Author: Ben Warren <biggerbadderben@gmail.com>
Date:   Mon Nov 9 14:01:08 2009 -0800

    SMC91111: Clean up SMC_inx macros on xsengine and xaeniax

    This patch fixes the following warnings:

    Configuring for xaeniax board...
    smc91111_eeprom.c: In function 'print_macaddr':
    smc91111_eeprom.c:278: warning: suggest parentheses around + or - in operand of &
    smc91111_eeprom.c:281: warning: suggest parentheses around + or - in operand of &
    ...
    Configuring for xsengine board...
    smc91111_eeprom.c: In function 'print_macaddr':
    smc91111_eeprom.c:278: warning: suggest parentheses around + or - inside shift
    smc91111_eeprom.c:281: warning: suggest parentheses around + or - inside shift

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 830c7b6722c6a9762411bf52a7bf2fae4dc71dab
Author: Ben Warren <biggerbadderben@gmail.com>
Date:   Mon Nov 9 11:43:18 2009 -0800

    Fix CS8900 regression on impa7 board

    The following error was seen on impa7 board, due to its use of a 32-bit bus
    on CS8900.
    cs8900.c:137:37: error: macro "get_reg_init_bus" passed 2 arguments, but takes just 1

    This patch gives the macro the correct number of arguments

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit e5c5d9e0834bacf1c4787fa76cc4e369f2597cf5
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Sun Nov 1 22:39:56 2009 -0500

    clarify eth driver halt/recv steps

    The dev->halt() func can be called at any time, and the dev->recv() func
    does not need to use NetRxPackets[] when calling NetReceive().

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 497ab0eec5e1e2dfccc141a4485cd6b940e1424a
Author: Hui.Tang <zetalabs@gmail.com>
Date:   Thu Nov 5 09:58:44 2009 +0800

    Fix cs8900 dev->priv not init issue

    Ensure all CS8900 data structures are assigned before accessing device

    Signed-off-by: Hui.Tang <zetalabs@gmail.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 4fe5193d464ecdac26ddc71b1351be5b86bbff29
Author: Stefan Roese <sr@denx.de>
Date:   Tue Nov 3 14:34:45 2009 +0100

    ppc4xx: 44x_spd_ddr2.c: Fix register macro ECCCR -> ECCES (SDRAM_ECCES)

    This error only appears when DEBUG is enabled in this driver. That's why
    it went unnoticed till now.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 916ed9444d3ab7b5cd6312557005f2a764a8baf7
Author: Stefan Roese <sr@denx.de>
Date:   Thu Oct 29 18:37:45 2009 +0100

    ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z)

    This patch fixes a problem only seen very occasionally on Canyonlands.
    The NOR flash interface (CFI driver) doesn't work reliably in all cases.
    Erasing and/or programming sometimes doesn't work. Sometimes with
    an error message, like "flash not erased" when trying to program an
    area that should have just been erased. And sometimes without any error
    messages. As mentioned above, this problem was only seen rarely and with
    some PLL configuration (CPU speed, EBC speed).

    Now I spotted this problem a few times, when running my Canyonlands with
    the following setup (chip_config):

    1000-nor         - NOR  CPU:1000 PLB: 200 OPB: 100 EBC: 100

    Changing the EBC configuration to not release the bus into high
    impedance state inbetween the transfers (ATC, DTC and CTC bits set to 1
    in EBC0_CFG) seems to fix this problem. I haven't seen any failure
    anymore with this patch applied.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Cc: David Mitchell <dmitchell@amcc.com>
    Cc: Jeff Mann <MannJ@embeddedplanet.com>

commit 25793f76bf9a7be59c9415ef0f78d034e8d53dae
Author: Remy Bohmer <linux@bohmer.net>
Date:   Thu Oct 29 12:29:37 2009 +0100

    ARM: Use Linux version for unaligned access code

    The asm-arm/unaligned.h includes linux/unaligned/access_ok.h
    This file is unsafe to be used on ARM, since it does an unaligned memory
    accesses which fails on ARM.

    Lookin at Linux the basic difference seems to be the header
    "include/asm-arm/unaligned.h". The Linux version of "unaligned.h"
    does *not* include "access_ok.h" at all. It includes "le_byteshift.h"
    and "be_byteshift.h" instead.

    Signed-off-by: Remy Bohmer <linux@bohmer.net>
    Signed-off-by: Stefan Roese <sr@denx.de>
    --
     include/asm-arm/unaligned.h            |    3 -
     include/linux/unaligned/be_byteshift.h |   70 +++++++++++++++++++++++++++++++++
     include/linux/unaligned/le_byteshift.h |   70 +++++++++++++++++++++++++++++++++
     3 files changed, 142 insertions(+), 1 deletion(-)
     create mode 100644 include/linux/unaligned/be_byteshift.h
     create mode 100644 include/linux/unaligned/le_byteshift.h

commit 6d6e7c53d5c75e5e24841c5506f4ed9d82adee09
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Nov 4 18:02:10 2009 -0600

    ppc/85xx: Fix inclusion of 83xx immap in 85xx builds

    The nand_boot_fsl_elbc.c is shared between 83xx & 85xx however we should
    not be including the immap_83xx.h when building 85xx.  We can just get
    this all from common.h

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 107b579c75256212d4bf8b99ee8d68e0078f3646
Author: Becky Bruce <beckyb@kernel.crashing.org>
Date:   Wed Nov 4 17:34:04 2009 -0600

    86xx: Remove redundant code in initdram

    The same code exists both inside an #ifdef and outside of it.
    Remove the extra code for all the 86xx boards.

    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 715d8f7608f77c93f1807a032644893fd5b6d08b
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:   Mon Nov 2 09:05:49 2009 -0600

    fsl_pci_init_port end-point initialization is broken

    commit 70ed869e broke fsl pcie end-point initialization.
    Returning 0 is not correct.  The function must return the first free
    bus number for the next controller.

    fsl_pci_init() must still be called and a bus allocated even if the
    controller is an end-point.

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Acked-by: Vivek Mahajan <vivek.mahajan@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 01471d538fb163f472a769f21267d7676c91267c
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Nov 4 01:29:04 2009 -0600

    Revert "ppc/85xx/pci: fsl_pci_init: pcie agent mode support"

    This reverts commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc.

    There isn't any need to modify the API for fsl_pci_init_port to pass the
    status of host/agent(end-point) status.  We can determine that
    internally to fsl_pci_init_port.  Revert the patch that makes the API
    change.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ff88229549e08fdd3f9127c1cc4db11a3576250f
Author: Dave Liu <daveliu@freescale.com>
Date:   Sat Oct 31 07:59:55 2009 +0800

    ppc/85xx: Fix misc L2 cache enabling bug

    We need loop-check the flash clear lock and enable bit for L2 cache.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 59434fe243962758742af5cb8e2ced976e17c302
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:   Fri Oct 30 10:16:27 2009 +0900

    sh: Update lowlevel_init.S of espt-giga

    There was the point that did not use write macro.
    Change to write macro.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit f1cae1969d9e971fb72827a5731ce7e752464aa2
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:   Fri Oct 30 10:01:25 2009 +0900

    sh: Move some defs to convince 'pcrel too far'

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
    Signed-off-by: Takashi Yoshii <yoshii.takashi@gmail.com>

commit 0f9eaf4b323ea0ca95944b84c7465b81ba575514
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date:   Thu Oct 15 13:36:34 2009 +0900

    sh: Remove malloc_bin_reloc from lib_sh, lib_nios2 and lib_nios.

    By "arm/microblaze/nios/nios2/sh: Remove relocation fixups"
    (commit: 0630535e2d062dd73c1ceca5c6125c86d1127a49", doesn't need
    malloc_bin_reloc function. This commit remove this.

    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

commit 0775437293a6963cb21244dfae6978cbf67c6bfe
Author: Ben Warren <biggerbadderben@gmail.com>
Date:   Wed Oct 21 21:53:39 2009 -0700

    Fix DM9000 MAC address handling

    Proper behavior is to pull MAC address from NVRAM in the initialization() an
    stuff it in dev->address, then program the device from dev->address in
    the init() function.

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 98d92d8c9f4021629a45261ad5ec3f3595f3a27a
Author: Wolfgang Denk <wd@denx.de>
Date:   Wed Oct 28 22:07:56 2009 +0100

    sbc8349: fix incorrect comment

    The comment for the BR0_PRELIM port size initialization incorrectly
    stated 32 bit, while it's actually 16 bit. The code is correct.

    Reported-by: Guenter Koellner <guenter.koellner@nsn.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a38f85e180a30b6225808828ded1017b1a5418c6
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Wed Oct 28 11:05:03 2009 -0400

    Fix Compliation warning for TNY-A9260 and TNY-A9G20

    The patch fixes a compilation warning by defining
    CONFIG_SYS_64BIT_VSPRINTF in the config file

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 264e42ee54f1d322805d9068168fd362b413fd09
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Wed Oct 28 11:04:53 2009 -0400

    Fix Compliation warning for SBC35-A9G20 board

    The patch fixes a compilation warning by defining
    CONFIG_SYS_64BIT_VSPRINTF in the config file

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 353462f6ff9769091fb644d44d8025f20a4192d9
Author: Eric Millbrandt <emillbrandt@coldhaus.com>
Date:   Wed Oct 28 09:37:33 2009 -0500

    galaxy5200: Add default environment variables

    Extend bootdelay to 10 seconds.  Set boot retry time to 120 seconds and use
    reset to retry.  Define default bootcommand and bootargs for production.

    Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>

commit fa36ae790eb10ce70935f9a78f07703719dca422
Author: Stefan Roese <sr@denx.de>
Date:   Tue Oct 27 15:15:55 2009 +0100

    cfi: Add weak default function for flash_cmd_reset()

    Currently the CFI driver issues both AMD and Intel reset commands.
    This is because the driver doesn't know yet which chips are connected.
    This dual reset seems to cause problems with the M29W128G chips as
    reported by Richard Retanubun. This patch now introduces a weak default
    function for the CFI reset command, still with both resets. This can
    be overridden by a board specific version if necessary.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Cc: Richard Retanubun <RichardRetanubun@ruggedcom.com>

commit 4946775c6db52dba28f72ba3525764b54f1d4593
Author: Wolfgang Denk <wd@denx.de>
Date:   Wed Oct 28 00:49:47 2009 +0100

    Coding Style cleanup; update CHANGELOG, prepare -rc1

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 246c69225c7b962d5c93e92282b78ca9fc5fefee
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Sun Oct 25 15:12:56 2009 -0500

    Add 'editenv' command

    The editenv command can be used to edit an environment variable.
    Editing an environment variable is useful when one wants to tweak an
    existing variable, for example fix a typo or change the baudrate in the
    'bootargs' environment variable.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit b0fa8e50632a628766db23f5c884ec63f1469552
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Sun Oct 25 15:12:55 2009 -0500

    setenv(): Delete 0-length environment variables

    Previously setenv() would only delete an environment variable if it
    was passed a NULL string pointer as a value.  It should also delete an
    environment variable when it encounters a valid string pointer of
    0-length.

    This change/fix is generally useful and is necessary for the upcoming
    "editenv" command.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit ecc5500ee487170d8af6ff893fd1e0082380a01a
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Sun Oct 25 15:12:54 2009 -0500

    readline(): Add ability to modify a string buffer

    If the 'buf' parameter is a non-0-length string, its contents will be
    edited.  Previously, the initial contents of 'buf' were ignored and the
    user entered its contents from scratch.

    This change is necessary to support the upcoming "editenv" command but
    could also be used for future commands which require a user to modify
    an existing string.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit f923943843cd617d681387e7fe81a48060cc6401
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Sun Oct 25 15:12:53 2009 -0500

    cread_line(): Remove unused variables

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit e491a71e578e93bd3b2f8f20d8ef8f111c98010d
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Sun Oct 25 15:12:52 2009 -0500

    Check for NULL prompt in readline_into_buffer()

    Previously, passing readline() or readline_into_buffer() a NULL 'prompt'
    parameter would result in puts() printing garbage when
    CONFIG_CMDLINE_EDITING was enabled.

    Note that no board currently triggers this bug.  Enabling
    CONFIG_CMDLINE_EDITING on some boards (eg bab7xx) would result in
    the bug appearing.  This change is only intended to prevent someone
    from running into this issue in the future.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 16d1c10783660f3fdbc3c19141f42f3b0d1834d3
Author: Wolfgang Denk <wd@denx.de>
Date:   Sun Oct 25 23:00:09 2009 +0100

    drivers/net/phy/miiphybb.c: fix warning: no newline at end of file

    Add missing newline.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Luigi Mantellini <luigi.mantellini@idf-hit.com>
    Cc: Ben Warren <biggerbadderben@gmail.com>

commit a747a7f31059b9069e97c78bba5496409c33aa05
Author: Wolfgang Denk <wd@denx.de>
Date:   Tue Oct 27 00:03:32 2009 +0100

    Revert "env: only build env_embedded and envcrc when needed"

    Breaks building on many boards, and no really clean fix available yet.

    This reverts commit 6dab6add2d8ee80905234b326abc3de11be1d178.

commit 3fca80375981fe83d4674a0267183b469a1ea7ff
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Thu Oct 15 17:47:16 2009 +0400

    mpc85xx: Configure QE USB for MPC8569E-MDS boards

    Setup QE pin multiplexing for USB function, configure needed BCSRs
    and add some fdt fixups.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 14809b6c21c89dd65abaf3fea7627fb5ea0f78a3
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Thu Oct 15 17:47:13 2009 +0400

    mpc85xx: Configure QE UART for MPC8569E-MDS boards

    To make QE UART usable by Linux we should setup pin multiplexing
    and turn UCC2 Ethernet node into UCC2 QE UART node.

    Also, QE UART is mutually exclusive with UART0, so we can't enable
    it if eSDHC is in 4-bits mode on pilot boards, or if it's a prototype
    board with eSDHC in 1- or 4-bits mode.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 70d665b1d230b9575a647948e8db3da1e6743e5c
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Thu Oct 15 17:47:11 2009 +0400

    mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards

    SPI Flash (M25P40) is connected to the SPI1 bus, we need a few
    qe_iop entries to actually enable SPI1 on these boards.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 65dec3b4599a17e83ec69dfd059e4ea1e795ef37
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Thu Oct 15 17:47:09 2009 +0400

    mpc85xx: Setup SRIO memory region LAW for MPC8569E-MDS boards

    This patch sets memory window for Serial RapidIO on MPC8569E-MDS
    boards.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a29155e12286cc5ec2df72c1cab28e3659bfdad5
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Thu Oct 15 17:47:08 2009 +0400

    mpc85xx: Add eLBC NAND support for MPC8569E-MDS boards

    Simply add some defines, and adjust TLBe setup to include some
    space for eLBC NAND.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 7f52ed5ef1b490da282ace3316be381a6abf96a5
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Thu Oct 15 17:47:06 2009 +0400

    mpc85xx: Add eSDHC support for MPC8569E-MDS boards

    eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2
    (in 1-bit mode). When eSDHC is used, we should switch u-boot console to
    UART1, and make the proper device-tree fixups.

    Because of an erratum in prototype boards it is impossible to use eSDHC
    without disabling UART0 (which makes it quite easy to 'brick' the board
    by simply issung 'setenv hwconfig esdhc', and not able to interact with
    U-Boot anylonger).

    So, but default we assume that the board is a prototype, which is a most
    safe assumption. There is no way to determine board revision from a
    register, so we use hwconfig.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 48618126f78f05042dae428811809b594f747eb9
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Fri Oct 23 15:55:48 2009 -0500

    xpedite5370: Enable multi-core support

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 5ccd29c3679b3669b0bde5c501c1aa0f325a7acb
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Fri Oct 23 15:55:47 2009 -0500

    85xx: MP Boot Page Translation update

    This change has 3 goals:
    - Have secondary cores be released into spin loops at their 'true'
      address in SDRAM.  Previously, secondary cores were put into spin
      loops in the 0xfffffxxx address range which required that boot page
      translation was always enabled while cores were in their spin loops.

    - Allow the TLB window that the primary core uses to access the
      secondary cores boot page to be placed at any address.  Previously, a
      TLB window at 0xfffff000 was always used to access the seconary cores'
      boot page.  This TLB address requirement overlapped with other
      peripherals on some boards (eg XPedite5370).  By default, the boot
      page TLB will still use the 0xfffffxxx address range, but this can be
      overridden on a board-by-board basis by defining a custom
      CONFIG_BPTR_VIRT_ADDR.  Note that the TLB used to map the boot page
      remains in use while U-Boot executes.  Previously it was only
      temporarily used, then restored to its initial value.

    - Allow Boot Page Translation to be disabled on bootup.  Previously,
      Boot Page Translation was always left enabled after secondary cores
      were brought out of reset.  This caused the 0xfffffxxx address range
      to somewhat "magically" be translated to an address in SDRAM.  Some
      boards may not want this oddity in their memory map, so defining
      CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after
      the secondary cores are initialized.

    These changes are only applicable to 85xx boards with CONFIG_MP defined.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc
Author: Vivek Mahajan <vivek.mahajan@freescale.com>
Date:   Tue Oct 27 12:18:55 2009 +0530

    ppc/85xx/pci: fsl_pci_init: pcie agent mode support

    Originally written by Jason Jin and Mingkai Hu for mpc8536.

    When QorIQ based board is configured as a PCIe agent, then unlock/enable
    inbound PCI configuration cycles and init a 4K inbound memory window;
    so that a PCIe host can access the PCIe agents SDRAM at address 0x0

    * Supported in fsl_pci_init_port() after adding pcie_ep as a param
    * Revamped copyright in drivers/pci/fsl_pci_init.c
    * Mods in 85xx based board specific pci init after this change

    Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 273a28ad9ef59dcfcd4c056ec1f61f1e0896cfaa
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Tue Oct 27 09:36:38 2009 +0530

    85xx/p1_p2_rdb: Fixing DDR configuration for 800MHz data rate

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 924024c396761c267b948f38d78e9905f2036501
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Tue Oct 27 09:26:55 2009 +0530

    85xx/p1_p2rdb: Fix crash while configuring 32 bit DDR i/f for P1020RDB.

    The data being modified was in NOR flash which caused the crash.

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 2c0c58b92dbb68007061bdc0edd23bdf142efebf
Author: Sergey Mironov <ierton@gmail.com>
Date:   Wed Sep 23 16:47:38 2009 +0400

    Fix bug in jumptable call stubs for SPARC.

    Signed-off-by: Sergey Mironov <ierton@gmail.com>
    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

commit 3e303f748cf57fb23e8ec95ab7eac0074be50e2b
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Thu Oct 15 17:47:04 2009 +0400

    fdt_support: Add multi-serial support for stdout fixup

    Currently fdt_fixup_stdout() is using hard-coded CONFIG_CONS_INDEX
    constant. With multi-serial support, the CONS_INDEX may no longer
    represent actual console, so we should try to extract port number
    from the current stdio device name instead of always hard-coding the
    constant value.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit da0e5f7ee828f246d85997486fff308837069453
Author: Leon Woestenberg <leon.woestenberg@gmail.com>
Date:   Mon Oct 26 10:03:32 2009 +0100

    ppc/85xx: Fix crashes due to generation of SPE instruction

    U-Boot crashed on the last instruction:

    int parse_stream_outer(struct in_str *inp, int flag)
    {
    effa4784:       94 21 ff 38     stwu    r1,-200(r1)
    effa4788:       7c 08 02 a6     mflr    r0
    effa478c:       42 9f 00 05     bcl-    20,4*cr7+so,effa4790 <parse_stream_outer+0xc>
    effa4790:       7d 80 00 26     mfcr    r12
    effa4794:       13 c1 b3 21     evstdd  r30,176(r1)

    ...which is a  SPE instruction, although -mno-spe was used.

    tmp/cross/ppce500v2/bin/powerpc-angstrom-linux-gnuspe-gcc --version
    powerpc-angstrom-linux-gnuspe-gcc (GCC) 4.3.3

    Seems to be a known issue (since 2008-04?!)

    Googled some, turns out this patch/workaround works for me on MPC8536DS.

    See http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html for more info

    Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 654ea1f3184235694306ddc5874baa27ad3018fe
Author: Dave Liu <daveliu@freescale.com>
Date:   Thu Oct 22 00:10:23 2009 -0500

    ppc/85xx: Make L2 support more robust

    According the user manual, we need loop-check the L2 enable bit set.

    Signed-off-by: Dave Liu <daveliu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 613ad28c3da4c7fc6336ef9d94993b25a5d0586e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Mon Oct 26 21:21:25 2009 -0500

    ppc/85xx: Fix compiler warning in nand_spl/.../p1_p2_rdb/nand_boot.c

    nand_boot.c: In function 'board_init_f':
    nand_boot.c:44: warning: 'sys_clk' may be used uninitialized in this function

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit e8967d96a0e8d09d91a3b7bd292746996dd8e7ac
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Mon Oct 26 21:18:33 2009 -0500

    ppc/85xx: Fix building NAND_SPL out of tree

    We need to source files to exist in the O=<FOO> nand_spl dir when
    we build out of tree.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f3ee25859e3920ee7c7cc519a3e6f60d70d7a53f
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:   Fri Oct 23 10:52:38 2009 +0200

    License cleanup: Fix license header for some esd display configurations

    These files were autogenerated by EPSON configuration tools.
    This patch replaces the autogenerated file headers by the GPL
    license notice.

    This change is done with the explicit permission
    of Epson Research & Development / IC Software Development.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>

commit 4166ee58d30ada7b298b9c941067f0341c2dccbe
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Fri Oct 9 17:12:44 2009 -0400

    sf: add GPL-2 license info

    Some of the new spi flash files were missing explicit license lines.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

commit d535a493004fb701f131b132402a7704f9c9342d
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Oct 21 23:29:51 2009 -0500

    fdt: Fix fdt padding issue for initrd mem_rsv

    Its possible that we end up with a device tree that happens to be a
    particular size that after we call fdt_resize() we don't have any
    space left for the initrd mem_rsv.

    Fix this be adding a second mem_rsv into the size calculation.  We
    had one to cover the fdt itself and we have the potential of adding
    a second for the initrd.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>

commit 4bc3d2afb380e78fdbb9c501d9a8da6d59eb178e
Author: Steve Sakoman <sakoman@gmail.com>
Date:   Tue Oct 20 18:21:18 2009 +0200

    ARM: OMAP3: Refactors the SM911x driver

    Move the test up in the function to not hang on systems without ethernet.

    Signed-off-by: Steve Sakoman <sakoman@gmail.com>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit f3807374787e4394efb767e2e8527887f57e51b8
Author: Minkyu Kang <mk7.kang@samsung.com>
Date:   Thu Oct 15 11:19:15 2009 +0900

    s5pc1xx: SMDKC100: fix compile warnings

    fix the following compile warnings
    warning: dereferencing type-punned pointer will break strict-aliasing rules

    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

commit 8003c361deec3ee651451662efd05352f1abdd40
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Tue Oct 6 08:44:22 2009 +0200

    arm926ejs: 8-byte align stack to avoid LDRD/STRD problems

    U-boot for Marvell Kirkwood boards no longer work after the EABI changes
    introduced in commit f772acf8a584067033eff1e231fcd1fb3a00d3d9. This
    turns out to be caused by a stack alignment issue. The armv5te
    instructions ldrd/strd instructions require 8-byte alignment to work
    properly (otherwise undefined behavior).

    Tested on an OpenRD base board, where both printouts and ubifs stuff now
    works.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>

commit e63e5904b48528f3f3cc98317df6fc62fab25bf9
Author: Tom Rix <Tom.Rix@windriver.com>
Date:   Sat Oct 17 12:41:06 2009 -0500

    TI OMAP3 SDP3430: Initial Support

    Start of support of
    Texas Instruments Software Development Platform(SDP)
    for OMAP3430 - SDP3430

    Highlights of this platform are:
    Flash Memory devices:
        Sibley NOR, Micron 8bit NAND and OneNAND
    Connectivity:
        3 UARTs and expanded 4 UART ports + IrDA
        Ethernet, USB
    Other peripherals:
        TWL5030 PMIC+Audio+Keypad
        VGA display
    Expansion ports:
        Memory devices plugin boards (PISMO)
        Connectivity board for GPS,WLAN etc.
    Completely configurable boot sequence and device mapping
    etc.

    Support default jumpering and:
     - UART1/ttyS0 console(legacy sdp3430 u-boot)
     - UART3/ttyS2 console (matching other boards,
                 and SDP HW docs)
     - Ethernet
     - mmc0
     - NOR boot

    Currently the UART1 is enabled by default.  for
    compatibility with other OMAP3 u-boot platforms,
    enable the #define of CONSOLE_J9.

    Conflicts:

        Makefile

    Fixed the conflict with smdkc100_config by moving omap_sdp3430_config
    to it is alphabetically sorted location above zoom1.

    Signed-off-by: David Brownell <david-b@pacbell.net>
    Signed-off-by: Nishanth Menon <nm@ti.com>
    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

commit a4474ff8629be5f28aefb8a9f48d4411d62fb0d2
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Tue Oct 13 19:35:11 2009 -0400

    TI DaVinci: Adding Copyright for DM365 EVM

    Forgot to add Copyright while submitting the patch.
    This patch adds the copyright.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 11b0102218bbb50ac5c04f1521f2a22ed4e90cf1
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Tue Oct 13 12:32:32 2009 -0400

    TI DaVinci: Fix DM6467 EVM Compilation Warning

    Due to new TI boards being added to U-Boot, the hardware.h
    is getting very messy. The warning being fixed is due to
    the EMIF addresses being redefined.

    The long term solution(after 2009.11) to this is to
    have SOC specific header files.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit fac1ef4ba685606bf28349d18e050ea08b50e669
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Tue Oct 13 12:01:52 2009 -0400

    TI DaVinci: DM355 Leopard: Fix compilation warning

    We get a compliation warning when we enable the NAND driver
    for DM355 leopard. The waring we get is that we have
    an implicit declaration of davinci_nand_init.

    It is fixed by including the asm/arch/nand_defs.h header file

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit f8a812aa656bc34622303a26fa5003d19c34aeed
Author: Nishanth Menon <nm@ti.com>
Date:   Tue Oct 13 12:49:55 2009 -0400

    TI OMAP3: make gpmc_config as const

    gpmc_config should not be a variant as it is board specific
    hence make it a const parameter

    Fixes issues identified by Dirk:
    - build issue for zoom2
    - warnings for all other OMAP3 platforms using nand/onenand etc

    Signed-off-by: Nishanth Menon <nm@ti.com>

commit cfc25874624a328f53ad59b1206e2103f2e62d74
Author: Stefan Roese <sr@denx.de>
Date:   Mon Oct 19 16:19:36 2009 +0200

    ppc4xx: Sequoia: Add chip_config command

    This patch removes the Sequoia "bootstrap" command and replaces it
    with the now common command "chip_config".

    Please note that the patches with the dynamic PCI sync clock
    configuration have to be applied, before this one should go in.
    This is because Sequoia has 2 different bootstrap EEPROMs, and
    the old bootstrap command configured different values depending
    on the detected PCI async clock (33 vs. 66MHz). With the PCI sync
    clock patches, this is not necessary anymore. The PCI sync clock
    will be configured correctly on-the-fly now.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit c85b58397030e25e146ccf5085c86221c40c53b3
Author: Stefan Roese <sr@denx.de>
Date:   Mon Oct 19 14:14:08 2009 +0200

    ppc4xx: Yosemite/Yellowstone: Check and reconfigure the PCI sync clock

    This patch now uses the 440EP(x)/GR(x) function to check and dynamically
    reconfigure the PCI sync clock.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 23c51a2d6393cd3be9eb62cb42d92138ff6db8a9
Author: Stefan Roese <sr@denx.de>
Date:   Mon Oct 19 14:10:50 2009 +0200

    ppc4xx: Sequoia/Rainer: Check and reconfigure the PCI sync clock

    This patch now uses the 440EP(x)/GR(x) function to check and dynamically
    reconfigure the PCI sync clock.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 08c6a2628478ace808b3767db17e4148cac5a7fb
Author: Stefan Roese <sr@denx.de>
Date:   Mon Oct 19 14:44:11 2009 +0200

    ppc4xx: Print PCI synchronous clock frequency upon bootup

    Some 4xx variants (e.g. 440EP(x)/GR(x)) have an internal
    synchronous PCI clock. Knowledge about the currently configured
    value might be helpful. So let's print it out upon bootup.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5e47f9535f53fd4cc05f32fb6166870f976fbb4e
Author: Stefan Roese <sr@denx.de>
Date:   Mon Oct 19 14:06:23 2009 +0200

    ppc4xx: Add function to check and dynamically change PCI sync clock

    PPC440EP(x)/PPC440GR(x):
    In asynchronous PCI mode, the synchronous PCI clock must meet
    certain requirements. The following equation describes the
    relationship that must be maintained between the asynchronous PCI
    clock and synchronous PCI clock. Select an appropriate PCI:PLB
    ratio to maintain the relationship:

    AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz

    This patch now adds a function to check and reconfigure the sync
    PCI clock to meet this requirement. This is in preparation for
    some AMCC boards (Sequoia/Rainier and Yosemite/Yellowstone) using this
    function to not violate the PCI clocking rules.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 92b8964bed0d1b779d9e26be4e16755b5c635415
Author: Stefan Roese <sr@denx.de>
Date:   Fri Oct 16 10:01:09 2009 +0200

    ppc4xx: Update flash size in reg property of the NOR flash node

    Till now only the ranges in the ebc node are updated with the values
    currently configured in the PPC4xx EBC controller. With this patch now
    the NOR flash size is updated in the device tree blob as well. This is
    done by scanning the compatible nodes "cfi-flash" and "jedec-flash"
    for the correct chip select number.

    This size fixup is enabled for all AMCC eval board right now. Other
    4xx boards may want to enable it as well, if this problem with multiple
    NOR FLASH sizes exists.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Cc: Wolfgang Denk <wd@denx.de>

commit 30d45c0d3ea2231f9131276ea113595959a0720e
Author: Stefan Roese <sr@denx.de>
Date:   Wed Oct 21 11:59:52 2009 +0200

    fdt: Add fdt_fixup_nor_flash_size() to fixup NOR FLASH size in dtb

    This function can be used to update the size in the "reg" property
    of the NOR FLASH device nodes. This is necessary for boards with
    non-fixed NOR FLASH sizes.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Acked-by: Gerald Van Baren <vanbaren@cideas.com>
    Acked-by: Wolfgang Denk <wd@denx.de>

commit 76706cb86b1c76954ff5353db6757ab99cfd95fb
Author: Wolfgang Denk <wd@denx.de>
Date:   Tue Oct 20 23:12:13 2009 +0200

    cpu/ppc4xx/fdt.c: avoid strcpy() to constant string

    strcpy() was iused with the target address being a pointer to a
    constant string, which potentially is read-only. Use a (writable)
    array of characters instead.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0e1ac981194aa0d92eff0934442cec48a4f57834
Author: Wolfgang Denk <wd@denx.de>
Date:   Tue Oct 20 23:07:04 2009 +0200

    cpu/ppc4xx/fdt.c: avoid strcpy() to constant string

    strcpy() was iused with the target address being a pointer to a
    constant string, which potentially is read-only. Use a (writable)
    array of characters instead.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c55096c084308c08bf8891c190f90bdc3a232394
Author: Daniel Mack <daniel@caiaq.de>
Date:   Wed Apr 8 13:23:38 2009 +0200

    smc911x: add support for LAN9220

    Signed-off-by: Daniel Mack <daniel@caiaq.de>
    Cc: Sascha Hauer <s.hauer@pengutronix.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit f67066b6b0740b826ed862615c5ab022aaf4779a
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Sun Oct 18 20:43:14 2009 -0400

    envcrc: check return value of fwrite()

    Newer toolchains will often complain about unchecked fwrite():
        envcrc.c:117: warning: ignoring return value of `fwrite´, declared
                with attribute warn_unused_result

    So check the return value to silence the warnings.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit efd988ebaa241bab265b1511052350207cb7aaa0
Author: Wolfgang Denk <wd@denx.de>
Date:   Mon Oct 19 09:18:57 2009 +0200

    mcc200: fix build error

    Fix compile error:
    include/configs/mcc200.h:401:6: error: #elif with no expression

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 4e0539d2696992a5e32643a0c831e870cfe9a036
Author: Nishanth Menon <nm@ti.com>
Date:   Tue Oct 13 12:47:39 2009 -0400

    OMAP3: fix warnings when NAND/ONENAND is not used

    Fix build warnings by putting specific used variables
    under required #ifdefs for removing:
    mem.c:227: warning: unused variable 'f_sec'
    mem.c:226: warning: unused variable 'f_off'
    mem.c:225: warning: unused variable 'size'
    mem.c:224: warning: unused variable 'base'
    mem.c:222: warning: unused variable 'gpmc_config'

    Signed-off-by: Nishanth Menon <nm@ti.com>

commit 73db0c71da365a2d101878ae3aeb8ff3545a1828
Author: Nishanth Menon <nm@ti.com>
Date:   Tue Oct 13 12:47:24 2009 -0400

    OMAP3: export enable_gpmc_cs_config to board files

    Export enable_gpmc_cs_config into common header to
    prevent warning:

    warning: implicit declaration of function 'enable_gpmc_cs_config'

    Signed-off-by: Nishanth Menon <nm@ti.com>

commit 96a27c6dc29abf11740632ecd8ccab607b209c5d
Author: Tom Rix <Tom.Rix@windriver.com>
Date:   Mon Oct 12 12:07:40 2009 -0400

    Zoom2 Fix serial gpmc setup

    The offset to the chip select is incorrect.

    The change 187af954cf7958c24efcf0fd62289bbdb4f1f24e,

    omap3: embedd gpmc_cs into gpmc config struct

    introduced a problem with the serial gpmc setup.

    This patch reverts the chip select to its previous value.

    The symptoms of this problem are that the Zoom2
    currently hangs.

    This was run tested on Zoom2.

    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

commit 64d945abe8cffbacdaeca5f63b9b84f895d2d9ab
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Sun Oct 11 09:10:27 2009 -0400

    TI DaVinci Sonata: Add Config option for 64 bit Support

    Adding the CONFIG_SYS_64BIT_VSPRINTF fot the DM644x based Sonata
    Without this option enabled while performing NAND operations we will get
    wrong diagnostic messages.
    Example if the MTD NAND driver find a bad block while erasing from
    a certain address, it will say bad block skipped at 0x00000000.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 54aa603d2ce1d9374a1f5c6336362037ad2d8b51
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Sun Oct 11 09:14:58 2009 -0400

    TI DaVinci DVEVM: Add Config option for 64 bit Support

    Adding the CONFIG_SYS_64BIT_VSPRINTF in the DVEVM config.
    Without this option enabled while performing NAND operations we will get
    wrong diagnostic messages.
    Example if the MTD NAND driver find a bad block while erasing from
    a certain address, it will say bad block skipped at 0x00000000.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit b8d0aa0c78b8c0fa51acada3c486b81085924b53
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Sat Oct 10 10:19:20 2009 -0400

    TI DaVinci DM365: Add Config option for 64 bit Support

    Adding the CONFIG_SYS_64BIT_VSPRINTF in the DM365 EVM config.
    Without this option enabled while performing NAND operations we will get
    wrong diagnostic messages.
    Example if the MTD NAND driver find a bad block while erasing from
    a certain address, it will say bad block skipped at 0x00000000.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 86a725b9c8b829c217be90e590f3ca2c91fa1dca
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Sat Oct 10 10:18:46 2009 -0400

    TI DaVinci DM355: Add Config option for 64 bit Support

    Adding the CONFIG_SYS_64BIT_VSPRINTF in the DM355 EVM config.
    Without this option enabled while performing NAND operations we will get
    wrong diagnostic messages.
    Example if the MTD NAND driver find a bad block while erasing from
    a certain address, it will say bad block skipped at 0x00000000.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 9c44ddccb6602f620fc037974f3e4468ad8a7c0c
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Wed Sep 9 11:50:40 2009 -0400

    TI: OMAP3: Remove SZ_xx references

    This patch removes dependency on the sizes.h header file
    and removes all references to SZ_xx.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 13d2cb988ff07addce6e10ab2cb8965a9dd23c63
Author: Steve Sakoman <sakoman@gmail.com>
Date:   Sat Oct 10 14:29:37 2009 -0400

    OMAP3: Update Overo and Beagle environment

    Update default environment to support new kernel DSS2 subsystem and
    simplify rootfs type and location changes.

    Signed-off-by: Steve Sakoman <sakoman@gmail.com>
    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit c73607c5525c6957c815e64f7e865fdd3baffe98
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Sat Oct 10 13:46:26 2009 -0400

    TI DaVinci: Maintainer for DM355 and DM365 EVM

    Adding entries to the MAINTAINERS directory for the
    DM355 and DM365 EVM.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 5df65cf56aeef9fdeab83a259c37aa7d23836dd3
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Sat Oct 10 13:37:10 2009 -0400

    TI: DaVinci: DM355 Leopard board support

    This patch adds support for the leopard board which is
    based on the DM355 SOC.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 6ab176d7091d21960a1bd89fcb7fd87b9e91aca1
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Sat Oct 10 12:00:47 2009 -0400

    TI DaVinci DM646x: Adding initial support for DM6467 EVM

    This patch adds the initial support for DM6467 EVM.
    Other features like NET and NAND support will be added as follow up patches.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit d884f64a7b8482f6c9688600e0a4731fa5678e0c
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Thu Oct 1 20:22:09 2009 -0400

    TI DaVinci DM365: Fix Compilation warning for DM365 EVM

    This patch fixes a compilation warning while compiling
    the DM365 EVM.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 6fe5e87be4b944edf428835210056e020c8bb794
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Thu Oct 1 20:21:13 2009 -0400

    TI DaVinci DM355: Fix Compilation warning for DM355 EVM

    This patch fixes a compilation warning while compiling
    the DM355 EVM.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 513bbe1b1720682e6de0aba2d9db5e60f3a428bb
Author: Eric Benard <eric@eukrea.com>
Date:   Mon Oct 12 10:15:39 2009 +0200

    AT91 CPUAT91 Fix compiler warning

    This change fixes the compiler warning

    main.c: In function 'abortboot':
    main.c:122: warning: too few arguments for format

    Signed-off-by: Eric Benard <eric@eukrea.com>
    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

commit b1e81f701d044eee3884202b127d5d1f0668bdb9
Author: Eric Benard <eric@eukrea.com>
Date:   Mon Oct 12 10:15:40 2009 +0200

    AT91 CPU9260 CPU9G20 Fix compile warnings

    This change fixes the compiler warning

    nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF
      for correct output!

    Signed-off-by: Eric Benard <eric@eukrea.com>
    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

commit 94d50c527a3cedb6a41fbe6773256cdd1855317f
Author: Eric Benard <eric@eukrea.com>
Date:   Mon Oct 12 10:08:20 2009 +0200

    AT91 CPU9260 Fix machine ID when using a CPU9G20.

    Signed-off-by: Eric Benard <eric@eukrea.com>
    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

commit 8c0a92c8f4cf399e873c2611939f3617983785a9
Author: Alessandro Rubini <rubini@unipv.it>
Date:   Sat Oct 10 11:51:26 2009 +0200

    lcd: remove '#if 0' 32-bit scroll, now memcpy does it

    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
    Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>

commit e3ea948d4588e7efddbf0ee92147d93f827d7cea
Author: Alessandro Rubini <rubini@unipv.it>
Date:   Sat Oct 10 11:51:16 2009 +0200

    lib_generic memset: fill one word at a time if possible

    If the destination is aligned, fill ulong values until possible.
    Then fill remaining part by byte.

    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
    Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
    Acked-by: Mike Frysinger <vapier@gentoo.org>

commit ecd830b863e5c6ac5d804d3b3a92453a98d526fc
Author: Alessandro Rubini <rubini@unipv.it>
Date:   Sat Oct 10 11:51:05 2009 +0200

    lib_generic memcpy: copy one word at a time if possible

    If source and destination are aligned, this copies ulong values
    until possible, trailing part is copied by byte. Thanks for the details
    to Wolfgang Denk, Mike Frysinger, Peter Tyser, Chris Moore.

    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
    Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
    Acked-by: Mike Frysinger <vapier@gentoo.org>

commit 9c5586aa19bbedf290d2a663813404d2db87dfa5
Author: Alessandro Rubini <rubini@unipv.it>
Date:   Thu Oct 8 14:29:14 2009 +0200

    setenv: do console redirection even if previously unset

    If "stdout" is not previously set, doing "setenv stdout lcd" had no
    effect, since console redirection only worked if the environment
    variable was already set; the second time you run setenv it worked.
    Most default environments lack stdin/out/err definitions, so I'm sure
    I'm not alone with this problem.

    This patch simply moves a block of code out of a conditional, to do
    the same work even if the variable was previously unset.

    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
    Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>

commit c9ee39972a7758e883b73c6c0e3c3a14cd5b2f43
Author: Martha Stan <mmarx@silicontkx.com>
Date:   Wed Oct 7 04:38:46 2009 -0400

    mpc512x: fix System Clock Control constants for USB1 & USB2

    Signer-off-by: Martha Stan <mmarx@silicontkx.com>

commit 87b22b7787f397fc3daad570d711e478b1a7d253
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Oct 2 18:18:33 2009 -0400

    mem_mtest: fix error reporting, allow escape with ^C

    The basic memtest function tries to watch for ^C after each
    pattern pass as an escape mechanism, but if things are horribly
    wrong, we'll be stuck in an inner loop flooding the console with
    error messages and never check for ^C.  To make matters worse,
    if the user waits for all the error messages to complete, we
    then incorrectly report the test passed without errors.

    Adding a check for ^C after any error is printed will give
    the end user an escape mechanism from a console flood without
    slowing down the overall test speed on a slow processor.

    Also, the more extensive memtest quit after just a single error,
    which is inconsistent with the normal memtest, and not useful if
    if you are doing dynamic environmental impact testing, such as
    heating/cooling etc.

    Both tests now track the error count and report it properly
    at test completion.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Acked-by: Mike Frysinger <vapier@gentoo.org>

commit 9f4a420663419dc13f08a0ce65b93033c6172c69
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Thu Oct 1 12:11:54 2009 -0400

    new default shortcut to config & build a board

    The majority of the time that I build things in U-Boot, I want to just
    build for the board.  I don't make board config tweaks after selecting the
    board.  So add a new pattern rule that allows people to combine two steps
    in one go:
        `make foo_config && make` => `make foo`

    This shouldn't conflict with any existing make rules as the pattern rule
    is used only the rule doesn't already exist.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 6dab6add2d8ee80905234b326abc3de11be1d178
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Sep 30 15:29:58 2009 -0400

    env: only build env_embedded and envcrc when needed

    The env code is protected by the ENV_IS_EMBEDDED define, so attempting to
    compile the code when this isn't defined is pointless.  Now that the env
    headers have unified around CONFIG_ENV_IS_EMBEDDED, convert the build
    system to only build the env objects when this is enabled.  And now that
    the env code is conditionally compiled, we can drop the source code checks.

    For people who want to extract the environment manually, add a new option
    CONFIG_BUILD_ENVCRC that only enables the envcrc utility.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 78f4ca7976748159080c9d920d5eb542d1b32d4f
Author: Daniel Mack <daniel@caiaq.de>
Date:   Mon Sep 28 11:40:38 2009 +0200

    part_dos: check status flags of partitions

    Only read partitions which have 0x00 or 0x80 set in their status field.
    All others are invalid.

    Signed-off-by: Daniel Mack <daniel@caiaq.de>

commit 45def0ab9d1dedcd2a73939aad8373f760498762
Author: Eric Millbrandt <emillbrandt@coldhaus.com>
Date:   Fri Sep 25 17:47:43 2009 -0500

    galaxy5200: change cs1 configuration

    Correct the chip select configuration for the nand flash chip select.

    Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>

commit 7936b51165b519a16ecf3db302fb88df8b8b3b3d
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date:   Wed Sep 23 08:12:14 2009 +0200

    Cleanup: use constant

    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>

commit 7120c888101952b7e61b9e54bb42370904aa0e68
Author: Kim Phillips <kim.phillips@freescale.com>
Date:   Mon Oct 12 11:06:19 2009 -0500

    mpc83xx: mpc8313 - handle erratum IPIC1 (TSEC IRQ number swappage)

    mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
    h/w (see AN3545).  The base device tree in use has rev. 1 ID numbers,
    so if on Rev. 2 (and higher) h/w, we fix them up here.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
    Reviewed-by: Roland Lezuo <roland.lezuo@chello.at>

commit 91525c67153fcf2c19b2fc8d9c6376ac1a019f52
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Mon Oct 12 23:55:39 2009 +0400

    mpc85xx: Fix booting on various boards

    commit 0e870980a64584a591af775bb9c9fe9450124df9 ("8xxx: Removed
    CONFIG_NUM_CPUS from 85xx/86xx") breaks U-Boot on various boards,
    namely the ones that call get_sys_info() from board_early_init_f().

    get_sys_info() calls cpu_numcores(), which depends on probecpu()
    being called before. But probecpu() is called after board_early_init_f(),
    and so cpu_numcores() returns random values, which in turn crashes
    get_sys_info().

    To fix the issue we place probecpu() before board_early_init_f()
    in an initialization sequence.

    Booting on the following boards should be revived now:
     mpc8540ads
     mpc8541cds
     mpc8548cds
     mpc8555cds
     mpc8560ads
     mpc8568mds
     mpc8569mds
     and maybe more.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 26df6aa9916443077139f8f008fbc5f414ba05e5
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Oct 2 18:48:07 2009 -0400

    mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define

    This is an orphaned legacy leftover that is just polluting
    the config file namespace.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit fad15096e3b34927444ba5f6133742d40d78a425
Author: Dipen Dudhat <dipen.dudhat@freescale.com>
Date:   Thu Oct 8 13:33:29 2009 +0530

    ppc/P1_P2_RDB: On-chip BootROM support

    On Chip BootROM support for P1 and P2 series RDB platforms.

    This patch is derived from latest On Chip BootROM support on MPC8536DS

    Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f7780ec977e545b83bc5068e0957d640f1d98f13
Author: Dipen Dudhat <dipen.dudhat@freescale.com>
Date:   Thu Oct 8 13:33:18 2009 +0530

    ppc/P1_P2_RDB: NAND Boot Support

    NAND Boot support for P1 and P2 series RDB platforms.

    This patch is derived from NAND Boot support on MPC8536DS.

    Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit d11823ca3cb551814ffcd926402c8bcf3a7eff35
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Wed Oct 7 16:34:28 2009 -0400

    mpc8xxx: improve LAW error messages when setting up DDR

    When setting up the LAWs for the DDR, if there was an error,
    you got the not-so-helpful error text "ERROR" and nothing
    else.  Not only is it non-informative, but it is also
    pretty frustrating trying to grep for "ERROR" in the source.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a9946e3fc7089ddc6b7711a44e07a6b0827b79a7
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Wed Sep 30 16:12:31 2009 -0400

    sbc8641d: fix LAW so board doesn't hang on DDR init

    All versions between now and since this commit:

      commit bd76729bcbfd64b5d016a9b936f058931fc06eaf
      MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default

    will fail to allow the SBC8641D to get past DDR init, because the
    LAW config was overlapping.  Eventually this board will do SPD
    EEPROM config, but for now this gets the board working again.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3d1988ab47cc0e265272967e07d747ec600a44c9
Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
Date:   Sat Oct 10 13:34:09 2009 +0900

    Clean-up of s3c24x0 nand driver

    This patch re-formats the arm920t s3c24x0 nand driver in preparation for changes
    to add support for the Embest SBC2440-II Board.

    The changes are as follows:
    - re-indent the code using Lindent
    - make sure register layouts are defined using a C struct
    - replace the upper-case typedef'ed C struct names with lower case
    non-typedef'ed ones
    - make sure registers are accessed using the proper accessor functions
    - run checkpatch.pl and fix any error reports

    It assumes the following patch has been applied first:
    - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
     - patches 1/4, 2/4 and 3/4 of this series

    Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
    any s3c2400 or s3c2410 boards but need this patch applying before I can submit
    patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
    smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
    board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
    errors were found.

    Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

commit eb0ae7f549b7142826a8bcdd2dc945fac9c36349
Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
Date:   Sat Oct 10 13:33:11 2009 +0900

    Clean-up of s3c24x0 drivers excluding nand driver

    This patch re-formats the arm920t s3c24x0 driver files, excluding the nand
    driver, in preparation for changes to add support for the Embest SBC2440-II Board.

    The changes are as follows:
    - re-indent the code using Lindent
    - make sure register layouts are defined using a C struct
    - replace the upper-case typedef'ed C struct names with lower case
      non-typedef'ed ones
    - make sure registers are accessed using the proper accessor functions
    - run checkpatch.pl and fix any error reports

    It assumes the following patch has been applied first:
    - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
    - patches 1/4 and 2/4 of this series

    Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
    any s3c2400 or s3c2410 boards but need this patch applying before I can submit
    patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
    smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
    board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
    errors were found.

    Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

commit 8250d0bae84229abea397f6b474b3556b0f04e80
Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
Date:   Sat Oct 10 13:32:01 2009 +0900

    Clean-up of s3c24x0 header files

    This patch re-formats the arm920t s3c24x0 header files in preparation for
    changes to add support for the Embest SBC2440-II Board.

    The changes are as follows:
    - re-indent the code using Lindent
    - make sure register layouts are defined using a C struct
    - replace the upper-case typedef'ed C struct names with lower case
    non-typedef'ed ones
    - make sure registers are accessed using the proper accessor functions
    - run checkpatch.pl and fix any error reports

    It assumes the following patch has been applied first:
    - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
    - patch 1/4 of this series

    Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
    any s3c2400 or s3c2410 boards but need this patch applying before I can submit
    patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
    smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
    board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
    errors were found.

    Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

commit d67cce2dda3a40c3bd90a6c6e129fbb26dd4cfab
Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
Date:   Sat Oct 10 13:30:22 2009 +0900

    Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code

    This patch re-formats the code in cpu/arm920t and cpu/arm920t/23c24x0 in
    preparation for changes to add support for the Embest SBC2440-II Board.

    The changes are as follows:
    - re-indent the code using Lindent
    - make sure register layouts are defined using a C struct
    - replace the upper-case typedef'ed C struct names with lower case
      non-typedef'ed ones
    - make sure registers are accessed using the proper accessor functions
    - run checkpatch.pl and fix any error reports

    It assumes the following patch has been applied first:
    - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009

    Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
    any s3c2400 or s3c2410 boards but need this patch applying before I can submit
    patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no
    new warnings or errors were found.

    Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

commit cd85662b345c0c2248fd7637f65bb2fbb4d53dd9
Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
Date:   Sun Sep 6 00:33:13 2009 +0900

    CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards

    This sets CONFIG_SYS_HZ to 1000 for all boards that use the s3c2400 and
    s3c2410 cpu's which fixes various problems such as the timeouts in tftp being
    too short.

    Tested on an Embest SBC2440-II Board with local u-boot patches as I don't
    have any s3c2400 or s3c2410 boards but need this patch applying before I can
    submit patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets
    and no new warnings or errors were found.

    It was originally submitted on 21/06/2009 but didn't get into the 2009.08
    release, and Jean-Pierre made one comment on the original patch (see
    http://lists.denx.de/pipermail/u-boot/2009-July/055470.html). I've made two
    changes to the original patch:
    - it's been re-based to the current release
    - I've re-named get_timer_raw() to get_ticks() in response to Jean-Pierre's comment

    This affects the sbc2410, smdk2400, smdk2410 and trab boards. I've copied it
    directly to the maintainers of all except the sbc2410 which doesn't have an
    entry in MAINTAINERS.

    Signed-off-by: Kevin Morfitt <kmorfitt@aselaptop-1.localdomain>
    Tested-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

commit 8bc4ee9e8213abe4031ea1720aa02fa98d4402ad
Author: Minkyu Kang <mk7.kang@samsung.com>
Date:   Thu Oct 1 17:20:40 2009 +0900

    s5pc1xx: add support SMDKC100 board

    Adds new board SMDKC100 that uses s5pc100 SoC

    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
    Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>

commit dd2c9e6a3b67c8ff56694e515e6e3c7baddd8f52
Author: Minkyu Kang <mk7.kang@samsung.com>
Date:   Thu Oct 1 17:20:28 2009 +0900

    s5pc1xx: support serial driver

    This patch includes the serial driver for s5pc1xx.
    s5pc1xx uart driver needs own register setting and clock configuration.
    So, need to special driver.

    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

commit 4678d674f0cacc983dca7f6b9933cd8291c9797c
Author: Minkyu Kang <mk7.kang@samsung.com>
Date:   Thu Oct 1 17:20:08 2009 +0900

    s5pc1xx: support onenand driver

    This patch includes the onenand driver for s5pc100

    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit 399e5ae0d0b2eb4663fc5784201968c07d45afac
Author: Minkyu Kang <mk7.kang@samsung.com>
Date:   Thu Oct 1 17:20:01 2009 +0900

    s5pc1xx: support Samsung s5pc1xx SoC

    This patch adds support for the Samsung s5pc100 and s5pc110
    SoCs. The s5pc1xx SoC is an ARM Cortex A8 processor.

    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
    Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>

commit d087d19a994e741f0ce526124be117c90be482ae
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Tue Oct 13 21:58:26 2009 -0400

    Blackfin: drop MAC display at boot

    The default Blackfin boot would display the MAC address for the first NIC,
    but this relies on the environment.  The current net multi stack no longer
    writes the default hardware settings to the environment, so most of the
    time the display shows all zeros.  This can be pretty confusing and really
    doesn't add anything useful, so just drop it.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 1f003cf4738a199d99c818124784058526d2d40e
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Fri Oct 9 02:24:33 2009 -0400

    Blackfin: reset watchdog in udelay()

    All arches apparently should reset the watchdog in their udelay loop as
    noted on the mailing list recently:

      > A comment in flash_status_check() suggests that udelay() is
      > expected to reset the watchdog, but I can't find any architecture
      > where it does.

      If this is missing in other architectures, it should be fixed at the
      root cause, i. e. in udelay() or in the respective support routines.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 370ec734557d0b0f266e6d0953229ee12cae5edd
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Fri Oct 9 02:22:11 2009 -0400

    Blackfin: Remove relocation fixups

    Blackfin pieces like commit 0630535e2d062dd73c1ceca5c6125c86d1127a49.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0
Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Date:   Tue Sep 29 08:03:12 2009 +0200

    at91: Update MEESC board support

    This patch implements several updates:
    -disable CONFIG_ENV_OVERWRITE
    -add new hardware style variants and set the arch numbers appropriate
    -pass the serial# and hardware revision to the kernel
    -removed unused macros from include/configs/meesc.h
    -fixed multiline comment style

    Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

commit 9df20ce211576aa7ac75710dcd8d0a6236abfd70
Author: Simon Kagstrom <[simon.kagstrom@netinsight.net]>
Date:   Thu Oct 1 19:41:50 2009 +0530

    arm: Correct build with CONFIG_SYS_HUSH_PARSER set

    FLAG_PARSE_SEMICOLON is not defined without hush.h, so include that.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

commit df3826262c0efd2baec4df23d44b3942af98f5a7
Author: Olof Johansson <olof@lixom.net>
Date:   Tue Sep 29 10:22:45 2009 -0400

    TI: OMAP3: Overo Tobi ethernet support

    Add setup for ethernet on Tobi, allowing kernel/ramdisk to be loaded
    over tftp.

    This also refactors the smc911x driver to allow for detecting when the
    chip is missing. I.e. the detect_chip() function is called earlier and
    will abort gracefully when the Chip ID read returns all 1's.

    Signed-off-by: Olof Johansson <olof@lixom.net>
    Acked-by: Dirk Behme <dirk.behme@googlemail.com>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit 2a6cc97b91997ae485312ac91ffbcea6a89b663a
Author: Olof Johansson <olof@lixom.net>
Date:   Tue Sep 29 10:21:29 2009 -0400

    SMC911X: Add chip auto detection

    Refactor the smc911x driver to allow for detecting when the chip is missing.
    I.e. the detect_chip() function is called earlier and will abort gracefully
    when the Chip ID read returns all 1's.

    Signed-off-by: Olof Johansson <olof@lixom.net>
    Acked-by: Dirk Behme <dirk.behme@googlemail.com>
    Acked-by: Ben Warren <biggerbadderben@gmail.com>

commit 0297ec7e2a4039b8a28346f52f3ccca4db1ddc62
Author: Tom Rix <Tom.Rix@windriver.com>
Date:   Tue Sep 29 10:19:49 2009 -0400

    TI OMAP3 Use arm init sequence to initialize i2c

    This changes fixes an early i2c error.

    It appears that I2C is working because once a read or write
    error is detected, the omap24xx_i2c driver calls i2c_init
    inside its error handling check.

    While it is ok to attempt error handling this way, the boards
    must not depend on this side effect to initialize it's i2c.

    Instead of explicitly calling i2c_init for every board, use
    the generic arm initialization in lib_arm/board.c. By defining
    the config variable CONFIG_HARD_I2C, the omap3 i2c initialization
    is included in the init_sequence table.

    Run tested on Beagle.
    Compile tested on the omap3's

    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
    Acked-by: Dirk Behme <dirk.behme@googlemail.com>

commit 4df30f3bb7285b2c962713a5c693c16fd90885e0
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Tue Sep 29 09:43:04 2009 -0400

    TI: DaVinci DM365: Enabling network Support on DM365 EVM

    This patch enables EMAC on the DM365 EVM.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
    Acked-by: Tom Rix <Tom.Rix@windriver.com>

commit 00e1665a3cf956e09ac2ce86ef6ec459f6bfb33c
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Tue Sep 29 10:02:38 2009 -0400

    TI: DaVinci: GPIO header file and definitions

    Some DaVinci SOC's use GPIOs to enable EMAC and DM9000.
    This patch adds some definitions for GPIO registers and also adds
    structures for GPIO.
    A separate header file is being added so that in future we
    can have a DaVinci GPIO driver similer to OMAP.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
    Acked-by: Tom Rix <Tom.Rix@windriver.com>

commit 95ae803afbdd9f673c94b992ea624a10d252afc2
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Fri Sep 18 17:30:05 2009 -0400

    TI: DaVinci DM646x: Update flag used to represent DM646x SOC's

    In the DaVinci specific code, we use both CONFIG_SOC_DM646X and
    CONFIG_SOC_DM646x to represent DM646x specific code.
    This patch changes occurrences of CONFIG_SOC_DM646x to
    CONFIG_SOC_DM646X. This is because for DM644x series of SOCs we use
    the flag CONFIG_SOC_DM644X. We want some uniformity.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
    Acked-by: Tom Rix <Tom.Rix@windriver.com>

commit fc9165fdb3b021aa8ff02417692220fe9344072b
Author: Olof Johansson <olof@lixom.net>
Date:   Mon Sep 28 08:19:30 2009 -0400

    OMAP3: Clean up whitespace in mux configs

    Switch from space-based indentation to tab-based in mux configs, as pointed
    out by WD at:

    http://lists.denx.de/pipermail/u-boot/2009-September/061241.html

    Nothing but whitespace changes in this patch (diff -w gives no output).

    Signed-off-by: Olof Johansson <olof@lixom.net>

commit 9de0212bd7c4c82a7e8c2a2c8714f8c7abc57d08
Author: Dirk Behme <dirk.behme@googlemail.com>
Date:   Mon Sep 28 08:17:50 2009 -0400

    OMAP3 MMC: Fix warning dereferencing type-punned pointer

    Fix warning
    Dereferencing type-punned pointer will break strict-aliasing rules

    Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
    CC: Steve Sakoman <sakoman@gmail.com>
    Acked-by: Tom Rix <Tom.Rix@windriver.com>

commit e92daeb5c2050438402b87c7d614e8a13c294348
Author: Simon Kagstrom <[simon.kagstrom@netinsight.net]>
Date:   Tue Sep 22 04:01:01 2009 +0530

    Support for the OpenRD base board

    The implementation is borrowed from the sheevaplug board and the Marvell
    1.1.4 code. Unsupported (or untested) is the SD card, PCIe and SATA.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>

commit a62e78fc444c67f958be48891bef3dab0e9eb285
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Sep 21 20:15:17 2009 +0530

    Kirkwood: mv88f6281gtw_ge: Add kwbimage build support

    This patch adds kwbimage configuration file
    (used by mkimage utility)
    to support u-boot.kwb target on mv88f6281gtw_ge board.

    To create Kirkwood boot image to be flashed on SPI Flash,
    additional parameter u-boot.kwb need to be passed during make.

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

commit 5bc7cbc15b1890682c0b279f708914518bd25f8d
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Sep 21 18:23:11 2009 +0530

    Kirkwood: rd6281a: Add kwbimage build support

    This patch adds kwbimage configuration file
    (used by mkimage utility)
    to support u-boot.kwb target on rd6281a platform.

    To create Kirkwood boot image to be flashed on NAND,
    additional parameter u-boot.kwb need to be passed during make.

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

commit 23b80982a02a43bf4ead91574c9d6f1b647ccc8f
Author: Tom Rix <Tom.Rix@windriver.com>
Date:   Sun Sep 27 11:10:09 2009 -0500

    Add support for Eukrea CPU9260/CPU9G20 SBC

    these boards are built around Atmel's AT91SAM9260/9G20 and have
    up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
    and include a 10/100 Ethernet PHY in RMII mode.

    Signed-off-by: Eric Benard <eric@eukrea.com>
    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

commit d8380c9d35e88759c96e68a03738446ca0cb292f
Author: Tom Rix <Tom.Rix@windriver.com>
Date:   Sun Sep 27 07:47:24 2009 -0500

    Add support for Eukrea CPUAT91 SBC

    CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR
    flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII
    mode.

    Signed-off-by: Eric Benard <eric@eukrea.com>
    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

commit eb95aa15e644c29b01832703aa4964fe419170f0
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Mon Sep 14 14:57:47 2009 -0400

    TI: DaVinci DM365: Minor config cleanup

    The DM365 config was using the 'CONFIG_CMD_SAVEENV' flag.
    This is already included when we include the
    config_cmd_default.h header file. So this flag is removed.
    Also another flag to enable NAND functions was being
    enabled incorrectly.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 5d783c1ffd691ffdadbc2c2f796c41481b7cdce7
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Mon Sep 14 15:03:06 2009 -0400

    TI DaVinci DM365: Removing header file which does not exist

    The DaVinci DM365 EVM board specific code was including a header file
    which does not exist. So removing this header file.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 409ec37bd8ae8822d276e77419d899571891b191
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Tue Sep 8 18:08:06 2009 -0400

    TI DaVinci: DM355: Config Cleanup and Update

    This patch does the following
    1) Enables the NAND driver which is now available.
    2) Enables the 'CONFIG_MTD_DEVICE' as without this the
    compilation will fail
    3) We now have a safe place to store environment and defines
    an offset where this can be stored. This offset value is such that it is after
    the location where U-Boot is flashed using TI flash utilities.
    4) Enables Bootdelay
    5) Increases malloc() arena size. Manufacturers are coming out with
    NAND with large blocks sizes of upto 1 MiB. It has been noticed that
    as the block size of the NAND used is increased, if this particular
    value is not increased, the NAND driver will output out of memory
    errors.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 7908c97a106765ad8816bf2271a5bf315728b274
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Tue Sep 8 11:37:39 2009 -0400

    TI DaVinci: DM646x: Initial Support for DM646x SOC

    DM646x is an SOC from TI which has both an ARM and a DSP.
    There are multiple variants of the SOC mainly dealing with different
    core speeds.
    This patch adds the initial framework for the DM646x SOC.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 5d0f53624c24eaf82d58368a6a5b8476392dd5c7
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Wed Sep 9 15:26:00 2009 -0400

    TI DaVinci: DM6446: Fix Compilation error in NAND mode

    The Default mode that is built for the Davinci DVEVM happens
    to be the NOR mode.
    When we want to build for the NAND mode, we get a compilation
    error. This is overcome by defining the CONFIG_MTD_DEVICE
    flag in the NAND mode.
    The image built for NAND mode was successfully tested on the
    DaVinci DM6446 EVM.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit 7a2aa8b68120f333ed2edc33475ca195810d6cb1
Author: Tom Rix <Tom.Rix@windriver.com>
Date:   Thu Sep 10 15:27:57 2009 -0400

    OMAP3 Move cache routine to cache.S

    v7_flush_dcache_all, because it depends on omap ROM code is not
    generic.  Rename the function to 'invalidate_dcache' and move it
    to the omap cpu directory.

    Collect the other omap cache routines l2_cache_enable and
    l2_cache_disable with invalide_dcache into cache.S.  This
    means removing the old cache.c file that contained l2_cache_enable
    and l2_cache_disable.

    The conversion from cache.c to cache.S was done most through
    disassembling the uboot binary.  The only significant change was
    to change the comparision for the return of get_cpu_rev from

       cmp      r0, #0
       beq      earlier_than_label

    Which was lost information to

       cmp      r0, #CPU_3XX_ES20
       blt      earlier_than_label

    The paths through the enable routine were verified by
    adding an infinite loop and seeing the hang.  Then
    removing the infinite loop and seeing it continue.

    The disable routine is similar enough that it was not
    tested with this method.

    Run tested by cold booting from nand on beagle and zoom1.
    Compile tested on MAKEALL arm.

    Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

commit a16df2c11188297eca43cf6080c70fb69b960232
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Tue Sep 8 17:09:52 2009 -0400

    TI DaVinci: Remove references to SZ_xx

    This patch removes the asm/sizes.h header file from being
    included in the DaVinci SOC configs.
    References to SZ_xx have been replaced by appropriate
    bit shifted values.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
    Acked-by: Wolfgang Denk <wd@denx.de>

commit 285870f75378aca41c5063e4358ad93bf3014fd8
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:   Thu Oct 9 01:27:18 2008 -0500

    Leave x86emu op code tables in default section

    Forcing the tables into got2 caused extra relocation when using -mrelocatable.
    This patch requires any board defining CONFIG_BIOSEMU to use -mrelocatable.

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Acked-by: Jin Zhengxiong <Jason.Jin@freescale.com>

commit be2254423b86572841aa70ff05d20933d1b49823
Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Date:   Sat Oct 10 12:42:22 2009 +0200

    Update all board to support new bbmiiphy driver (with multibus support)

    Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 310cecb8ccdbc8a9be580e75b2fd362179d78535
Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Date:   Sat Oct 10 12:42:21 2009 +0200

    Add bb_miiphy_init call before any ethernet bring-up code.

    Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 4ba31ab33ac824635fcb49ac609070a9ebcab7f0
Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Date:   Sat Oct 10 12:42:20 2009 +0200

    Rewrite the miiphybb (Bit-banged MII bus driver) in order to support an arbitrary number of mii buses.

    This feature is useful when your board uses different mii buses for different
    phys and all (or a part) of these buses are implemented via bit-banging mode.

    The driver requires that the following macros should be defined into the board
    configuration file:

    CONFIG_BITBANGMII       - Enable the miiphybb driver
    CONFIG_BITBANGMII_MULTI - Enable the multi bus support

    If the CONFIG_BITBANGMII_MULTI is not defined, the board's config file needs
    to define at least the following macros:

    MII_INIT      - Generic code to enable the MII bus (optional)
    MDIO_DECLARE  - Declaration needed to access to the MDIO pin (optional)
    MDIO_ACTIVE   - Activate the MDIO pin as out pin
    MDIO_TRISTATE - Activate the MDIO pin as input/tristate pin
    MDIO_READ     - Read the MDIO pin
    MDIO(v)       - Write v on the MDIO pin
    MDC_DECLARE   - Declaration needed to access to the MDC pin (optional)
    MDC(v)        - Write v on the MDC pin

    The previous macros make the driver compatible with the previous version
    (that didn't support the multi-bus).

    When the CONFIG_BITBANGMII_MULTI is also defined, the board code needs to fill
    the bb_miiphy_buses[] array with a record for each required bus and declare
    the bb_miiphy_buses_num variable with the number of mii buses.
    The record (struct bb_miiphy_bus) has the following fields/callbacks (see
    miiphy.h for details):

    char name[]            - The symbolic name that must be equal to the MII bus
                             registered name
    int (*init)()          - Initialization function called at startup time (just
                             before the Ethernet initialization)
    int (*mdio_active)()   - Activate the MDIO pin as output
    int (*mdio_tristate)() - Activate the MDIO pin as input/tristate pin
    int (*set_mdio)()      - Write the MDIO pin
    int (*get_mdio)()      - Read the MDIO pin
    int (*set_mdc)()       - Write the MDC pin
    int (*delay)()         - Delay function
    void *priv             - Private data used by board specific code

    The board code will look like:

    struct bb_miiphy_bus bb_miiphy_buses[] = {
     { .name = miibus#1, .init = b1_init, .mdio_active = b1_mdio_active, ... },
     { .name = miibus#2, .init = b2_init, .mdio_active = b2_mdio_active, ... },
     ...
    int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
                              sizeof(bb_miiphy_buses[0]);

    Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit efaf6f1bf6ebdd8f16b0d0c2960abe8d06f95af4
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Oct 2 18:54:20 2009 -0400

    mpc83xx: cosmetic comment update relating to SPD EEPROM

    commit 6d0f6bcf337c5261c08fabe12982178c2c489d76 did the big
    rename of CFG_ macros to CONFIG_SYS macros.  But it missed
    a couple of instances within comments.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit afc3ba0fc4195624e79e21244380ed7cc2fd6969
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Date:   Thu Oct 8 02:03:51 2009 +0200

    relocation: Do not relocate NULL pointers.

    NULL is an absolute value and should not be relocated.
    After this correction code like:
     void weak_fun(void) __attribute__((weak));
     printf("weak_fun:%p\n", weak_fun);
    will still print null after relocation.

    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

commit 3beb40c2473f0dd373231c723d88c51e46ad96f7
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Wed Oct 7 11:45:00 2009 -0500

    85xx: Ensure BSS segment isn't linked at address 0

    When U-Boot is relocated from flash to RAM pointers are modified
    accordingly.  However, pointers initialzed with NULL values should not
    be modified so that they maintain their intended NULL value.  If the
    BSS segment is linked at address 0 its address will not be
    updated as necessary during relocation.

    This is a temporary workaround.  The end goal is to add support to
    U-Boot to dynamically locate the BSS at an arbitrary address at
    runtime.  When the ability to fixup the BSS inteligently is
    added, this workaround can be removed and the 85xx link script
    can put the BSS at a fixed address at link time.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 95c44ec485b46ffb43dbdaa299f1491a500fdadf
Author: Detlev Zundel <dzu@denx.de>
Date:   Wed Oct 7 16:38:05 2009 +0200

    tqm5200: Correct comment and code in post_hotkeys_pressed.

    This fixes the code and the comment according to the original intent of
    doing an intensive memory test when PSC6_3 is pulled low on the STK52xx.
    Notably PORT_CONFIG will be overridden with this correct code now,
    so beware.

    The original code only worked by coincidence depending on the PORT_CONFIG
    setting from the header file.  The new code was tested to ensure that the
    (undocumented) memory test still works on the STK52x.

    Signed-off-by: Detlev Zundel <dzu@denx.de>
    CC: Martin Krause <Martin.Krause@tqs.de>

    Minor white-space cleanup.
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit da01f53404f99db185d196867af79371725d4683
Author: Wolfgang Denk <wd@denx.de>
Date:   Sun Oct 4 22:56:08 2009 +0200

    mpc512x: fix fixed_sdram() init code.

    Commit 054197ba and later fixes used an array to initialize some of
    the MDDRC parameters; however, the use of an array turned out to be a
    bad idea as it was not possible to correlate structure entries to
    array indices in readable and reliable way. Now we use a struct
    instead, which makes this self-explanatory.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit dbcc357166bed20df13450e93a501f30b197efd1
Author: Niklaus Giger <niklaus.giger@member.fsf.org>
Date:   Sun Oct 4 20:04:22 2009 +0200

    ppc4xx: respect 80-chars per line in ppc*.h files

    After running checkstyle.pl on the three previous patches I noted that in
    the *.h files there were a lot of long lines. This patch solves this problem.

    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 78d2a641371ec71cc3786b167a318c7b115fbb90
Author: Niklaus Giger <niklaus.giger@member.fsf.org>
Date:   Sun Oct 4 20:04:21 2009 +0200

    ppc4xx: Rework cmd reginfo

    The command "reginfo" got an overhaul for the ppc4xx. It dumps all the
    relevant HW configuration registers (address, symbolic name, content).
    This allows to easily detect errors in *.h files and changes in the HW
    configuration.

    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit ddc922ff2c20ae0b7f9ce2df1ac28143e2f325bd
Author: Niklaus Giger <niklaus.giger@member.fsf.org>
Date:   Sun Oct 4 20:04:20 2009 +0200

    ppc_4xx: Apply new HW register names

    Modify all existing *.c files to use the new register names
    as seen in the AMCC manuals.

    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit f80e61dcfe53fa3a5936659883415c9bd1b5a3d9
Author: Niklaus Giger <niklaus.giger@member.fsf.org>
Date:   Sun Oct 4 20:04:19 2009 +0200

    ppc4xx: Cleanup some HW register names

    Here you find all the changes in the include directory for new register names
    and adapting other ones to the names used by AMCC in their manuals, e.g.
    For 440EPx/GRPPC440EPx/GRX, Revision 1.15 – September 22, 2008
    For PPC405GP Embedded Processor, Revision 1.02 – March 22, 2006

    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 56f14818f66c68a8b9e45925f29ceb974405ad48
Author: Stefan Roese <sr@denx.de>
Date:   Tue Oct 6 07:21:08 2009 +0200

    ppc4xx: Add PPC405EX(r) Rev D support

    Unfortunately some Rev D PPC405EX/405EXr PVR's are identical with older
    405EX(r) parts. Here a list:

    0x12911475 - 405EX Rev D with Security *and* 405EX Rev A/B witout Sec
    0x12911473 - 405EX Rev D without Security *and* 405EXr Rev A/B with Sec

    Since there are only a few older parts in the field, this patch now
    changes the PVR's above to represent the new Rev D versions.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Cc: Phong Vo" <pvo@amcc.com>

commit 06dfaeef52a5f773ae4292432e3c74ff52ead316
Author: Stefan Roese <sr@denx.de>
Date:   Fri Oct 2 14:35:16 2009 +0200

    ppc4xx: Fix msg "initialization as root-complex failed" upon PCIe scan

    This message is printed upon PCIe bus scan, not only upon error, but also
    if no PCIe device is detected at all. Since this is not an error, let's
    remove this message in this case. We already have the message
    "link is not up." if there is no PCIe device present.

    Signed-off-by: Stefan Roese <sr@denx.de>
    Acked-by: Wolfgang Denk <wd@denx.de>

commit 54f5f056aa1daa3e39bad1c5c3fb43a72cdb9e84
Author: Mike Nuss <mike@terascala.com>
Date:   Mon Oct 5 12:33:28 2009 -0400

    PPC4xx: Denali core: Fix incorrect DDR row bits

    The SPD detection code for the Denali memory controller used on some
    ppc4xx
    processors incorrectly encodes DDR0_42. With certain memory
    configurations,
    this can cause the bootwrapper to incorrectly calculate the installed
    memory
    size, because the number of row bits is wrong. This patch fixes that
    encoding.

    Signed-off-by: Mike Nuss <mike@terascala.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 99dbd4efd6d5ecc37d7e8f28b20d9be8c83055c7
Author: Ben Warren <biggerbadderben@gmail.com>
Date:   Mon Oct 5 00:02:51 2009 -0700

    Add information about return values of xxx_eth_register() in documentation

    As discussed on mailing list, <0 indicates failure, >=0 indicates number
    of interfaces found.

    Also added blurb about private data

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 1f1e774ec6242d4ea34e5cff57232deb5bb587e0
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Sep 9 14:41:22 2009 -0400

    document network driver framework

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Acked-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit aba8237257dd15b0e76cc517f0e741c0908ee0b9
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Wed Sep 9 15:59:19 2009 +0530

    net: kirkwood_egiga.c: fixed build warning

    if link up detection code is disabled through config option, it gives build warning.
    This patch fixes the same

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 7194ab809532eeca3e2ee5dc12017cb901cc5842
Author: Ben Warren <biggerbadderben@gmail.com>
Date:   Sun Oct 4 22:37:03 2009 -0700

    Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API

    All in-tree boards that use this controller have CONFIG_NET_MULTI
    added
    Also:
      - changed CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111
      - cleaned up line lengths
      - modified all boards that override weak function in this driver
      - modified all eeprom standalone apps to work with new driver
      - updated blackfin standalone EEPROM app after testing

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 32e7f239dda8638377edb0d3e7ac269cabbafbe6
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Sep 21 20:28:18 2009 +0530

    net: phy: mv88e61xx.c : fixed build warning

    following build warning was observed

    mv88e61xx.c: In function ‘mv88e61xx_busychk’:
    mv88e61xx.c:208: warning: dereferencing type-punned pointer will break strict-aliasing rules

    This patch fixes the same
    Patch tested for rd6281a board build

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit c0b46d8ead3c6c5b569c83544fd71b9d73356869
Author: James Clough <james@rtetc.com>
Date:   Thu Sep 10 09:11:50 2009 +0200

    net: Fix problem with 405EZ ethernet interrupt

    On 405EZ the RX-/TX-interrupts are coalesced into one IRQ bit in the
    UIC. We need to acknowledge the RX-/TX-interrupts in the
    SDR0_ICINTSTAT reg as well.

    This problem was introduced with commit
    d1631fe1 [ppc4xx: Consolidate PPC4xx UIC defines]

    Signed-off-by: James Clough <james@rtetc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 91b469c95faf92435e3d5d78292ba78075a3c5ca
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Sep 2 04:18:55 2009 -0400

    net: add random_port() prototype

    The random_port() is meant to be used by other net code, but without a
    prototype, we get fun warnings like:
    dns.c: In function 'DnsSend':
    dns.c:89: warning: implicit declaration of function 'random_port'

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 3469424cb6d939c7aedf1e0efdec44a797c0a18c
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:37 2009 -0500

    ppc: Remove reloc_off field from global_data structure

    Now that proper relocation is supported, the reloc_off field is no longer
    necessary.

    Note that the location of the standalone application jump table pointer
    in the global data structure is affected by this change, breaking
    execution of standalone applications compiled for previous versions of
    U-Boot.

    We therefore increment XF_VERSION to 6

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0630535e2d062dd73c1ceca5c6125c86d1127a49
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Tue Sep 22 09:27:55 2009 -0500

    arm/microblaze/nios/nios2/sh: Remove relocation fixups

    These architectures don't need relocation fixups, so reduce their
    codesize a bit by defining CONFIG_RELOC_FIXUP_WORKS.

    Also remove the reloc_off field from their global data structures
    as it is no longer needed.

    Note that the location of the standalone application jump table pointer
    in the global data structure is affected by this change, breaking
    execution of standalone applications compiled for previous versions of
    U-Boot. We will therefore increment XF_VERSION in the next commit,
    which also touches this area.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 521af04d853361b49344b61892eb0618f9f713c5
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:36 2009 -0500

    Conditionally perform common relocation fixups

    Add #ifdefs where necessary to not perform relocation fixups.  This
    allows boards/architectures which support relocation to trim a decent
    chunk of code.

    Note that this patch doesn't add #ifdefs to architecture-specific code
    which does not support relocation.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 3cbcfa70b116df1bbdc90ba31c61adcaec058a8a
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:35 2009 -0500

    p3mx: Remove serial relocation fixups

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 80f73b92a19129854876ec3f1aef531a09e86d2d
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:34 2009 -0500

    lwmon, lwmon5: Remove sysmon POST relocation fixups

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 331ab60c4a418c39e5b1a05d4648a4155d0ad13e
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:33 2009 -0500

    mpl: Remove memory test relocation fixups

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 6385b28116f775da4771b768ba9bf93c3aaaf26e
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:32 2009 -0500

    fpga: Remove relocation fixups

    PPC boards are the only users of the current FPGA code which is littered
    with manual relocation fixups.  Now that proper relocation is supported
    for PPC boards, remove FPGA manual relocation.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit cd1011db80287eef933d1599b74cff1116c93134
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:31 2009 -0500

    tsec: Remove PHY command relocation fixups

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit b5650c5d8c99100144d8e4e9af910405f857bb7a
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:30 2009 -0500

    ppc: Remove board-specific command table relocation fixups

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit e6b05e774d7ce1641613cdeffb69c1d48139a869
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:29 2009 -0500

    ppc: Remove extable relocation fixups

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit b32a894011b1436758905fa10e6a03b8539c43c9
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:28 2009 -0500

    ppc: Remove pci config table pointer relocation fixups

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit a0e2066f392782730f0398095e583c87812d97f2
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:27 2009 -0500

    ppc: Remove board.c relocation fixups

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 244615197469dd6fe75ae082f38424b97c79aeaf
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:26 2009 -0500

    ppc: Check for compilers that don't support relocation

    Certain ppc compilers are known not to generate the .fixup section
    properly.  The .fixup section is necessary to create a relocatable
    U-Boot image.  A basic check for the existence of the .fixup section
    should hopefully catch the majority of broken compilers which don't
    support relocation.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 858290178f222d998b6425d85cf06822467918f3
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 11:20:25 2009 -0500

    ppc: Enable full relocation to RAM

    The following changes allow U-Boot to fully relocate from flash to
    RAM:
     - Remove linker scripts' .fixup sections from the .text section
     - Add -mrelocatable to PLATFORM_RELFLAGS for all boards
     - Define CONFIG_RELOC_FIXUP_WORKS for all boards

    Previously, U-Boot would partially relocate, but statically initialized
    pointers needed to be manually relocated.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 3b4bd2d75c4b3c1a4570f47ffaaed66f56a78ff4
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:   Wed Sep 30 11:55:04 2009 +0200

    ppc4xx: Add SDRAM detection for PMC440 boards

    This patch adds support to detect the amount of DDR2 SDRAM
    on PMC440 modules. Detection is done by probing through
    a list of available and supported hardware configurations
    from 1GByte down to 256MB.

    The static TLB entry is replaced by dynamically created entries.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit fb95169e39f2d03270bed552d27bbb02627a443e
Author: Stefan Roese <sr@denx.de>
Date:   Mon Sep 28 17:33:45 2009 +0200

    ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling

    This patch merges the ECC handling (ECC parity byte writing) into one
    file (ecc.c) for all PPC4xx SDRAM controllers except for PPC440EPx/GRx.
    This exception is because only those PPC's use the completely different
    Denali SDRAM controller core.

    Previously we had two routines to generate/write the ECC parity bytes.
    With this patch we now only have one core function left.

    Tested on Kilauea (no ECC) and Katmai (with and without ECC).

    Signed-off-by: Stefan Roese <sr@denx.de>
    Cc: Felix Radensky <felix@embedded-sol.com>
    Cc: Grant Erickson <gerickson@nuovations.com>
    Cc: Pieter Voorthuijsen <pv@prodrive.nl>

commit d24bd2517a2b847f773453eab0ee5b1c8ebc74ba
Author: Felix Radensky <felix@embedded-sol.com>
Date:   Sun Sep 27 23:56:12 2009 +0200

    ppc4xx: Reorganize DDR2 ECC handling

    Reorganize DDR2 ECC handling to use common code for
    SPD DIMMs and soldered SDRAM. Also, use common code
    to display SDRAM info (ECC, CAS latency) for SPD and
    soldered SDRAM variants.

    Signed-off-by: Felix Radensky <felix@embedded-sol.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 46a887949e11d2cddb91e17ca47e73341d71a379
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Sep 30 03:09:16 2009 -0400

    Blackfin: update default console= settings

    The Linux kernel has changed the way it numbers serial ports, so update
    the default command line to match it.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 4c5f307d58604dea001cccf388aa077a902ab0a5
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Mon Sep 21 18:04:49 2009 -0400

    Blackfin: bf533-ezkit: update env location

    The u-boot image has outgrown the current space and overflowed into the
    env sector.  So move the env to the next available sector (we've already
    allocated the first few sectors anyways for u-boot).

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 24b17d8a3c3a4b9ceaf6363ebe0021011b0b8bd8
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Sep 30 08:39:44 2009 -0500

    ppc/85xx: get_law_entry isn't used in CONFIG_NAND_SPL

    Don't include get_law_entry as part of the NAND_SPL build since the
    code isnt used.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 693a048d8ac191181f5b9adbff642d3f1bbd479f
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Wed Sep 23 15:20:39 2009 +0800

    Add README.mpc8536ds

    Add boot from NAND/eSDHC/eSPI description

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit e40ac4870c6e72302044e98338322f45c34435bd
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Wed Sep 23 15:20:38 2009 +0800

    On-chip ROM boot: MPC8536DS support

    The MPC8536E is capable of booting from the on-chip ROM - boot from
    eSDHC and boot from eSPI. When power on, the porcessor excutes the
    ROM code to initialize the eSPI/eSDHC controller, and loads the mian
    U-Boot image from the memory device that interfaced to the controller,
    such as the SDCard or SPI EEPROM, to the target memory, e.g. SDRAM or
    L2SRAM, then boot from it.

    The memory device should contain a specific data structure with control
    word and config word at the fixed address. The config word direct the
    process how to config the memory device, and the control word direct
    the processor where to find the image on the memory device, or where
    copy the main image to. The user can use any method to store the data
    structure to the memory device, only if store it on the assigned address.

    The on-chip ROM code will map the whole 4GB address space by setting
    entry0 in the TLB1, so the main image need to switch to Address space 1
    to disable this mapping and map the address space again.

    This patch implements loading the mian U-Boot image into L2SRAM, so
    the image can configure the system memory by using SPD EEPROM.

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9a1a0aedbbd56f901bfbc124f18ec6d9dcefe282
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Wed Sep 23 15:20:37 2009 +0800

    NAND boot: MPC8536DS support

    MPC8536E can support booting from NAND flash which uses the
    image u-boot-nand.bin. This image contains two parts: a 4K
    NAND loader and a main U-Boot image. The former is appended
    to the latter to produce u-boot-nand.bin. The 4K NAND loader
    includes the corresponding nand_spl directory, along with the
    code twisted by CONFIG_NAND_SPL. The main U-Boot image just
    like a general U-Boot image except the parts that included by
    CONFIG_SYS_RAMBOOT.

    When power on, eLBC will automatically load from bank 0 the
    4K NAND loader into the FCM buffer RAM where CPU can execute
    the boot code directly. In the first stage, the NAND loader
    copies itself to RAM or L2SRAM to free up the FCM buffer RAM,
    then loads the main image from NAND flash to RAM or L2SRAM
    and boot from it.

    This patch implements the NAND loader to load the main image
    into L2SRAM, so the main image can configure the RAM by using
    SPD EEPROM. In the first stage, the NAND loader copies itself
    to the second to last 4K address space, and uses the last 4K
    address space as the initial RAM for stack.

    Obviously, the size of L2SRAM shouldn't be less than the size
    of the image used. If so, the workaround is to generate another
    image that includes the code to configure the RAM by SPD and
    load it to L2SRAM first, then relocate the main image to RAM
    to boot up.

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 07355700523203c5f72018712cf0d93683f255c8
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Wed Sep 23 15:19:32 2009 +0800

    mpc8536: fix board config file line length

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit dd9ca98f2600000e5c2744735040100b770650e7
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Sep 25 11:14:11 2009 -0400

    sbc8548: reclaim wasted sector in boot flash

    By nature of being based off the MPC8548CDS board, this
    board inherited an ENV_SIZE setting of 256k.  But since
    it has a smaller flash device (8MB soldered on), it has
    a native sector size of 128k, and hence the ENV_SIZE was
    causing 2 sectors to be used for the environment.

    By removing the unused sector, we can push TEXT_BASE up
    closer to the end of address space and reclaim that
    sector for any other application.  This also fixes the
    mismatch between TEXT_BASE and MONITOR_LEN reported by
    Kumar earlier.

    Since this board also supports the ability to boot off
    the 64MB SODIMM flash, this change is forward looking
    with that in mind; i.e. the settings for MONITOR_LEN
    and ENV_SIZE will work when the 512k sectors of the
    SODIMM flash are used for alternate boot in the future.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 8280912e0657e96a7b7d8da7003656d62b0fd109
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Mon Sep 28 21:38:00 2009 -0500

    ppc/85xx: Clean up immap_85xx.h

    * Converted all white space to tabs
    * Converted all types to u8/u16/u32
    * Reduce lines to fit in 80 columns
    * Renamed MPC85xx_{Q,B}MAN -> FSL_CORENET_{Q,B}MAN

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit d44e9c1736283f0abc5d3c5d28cfea8480c93a79
Author: Scott Wood <scottwood@freescale.com>
Date:   Mon Sep 28 16:33:18 2009 -0500

    NAND: davinci: Fix warnings when 4-bit ECC not used

    I accidentally left v2 of "NAND: DaVinci:Adding 4 BIT ECC support"
    applied when I pushed the tree last merge window, and missed these fixes
    which were in v3 of that patch.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit ca6189db484882798f2a35a476c07e618e21f6d3
Author: Kyungmin Park <kmpark@infradead.org>
Date:   Tue Sep 22 09:05:00 2009 +0900

    Refactor OneNAND IPL code

    Refactoring the OneNAND IPL code

    and some minor fixed:
    - Remove unnecessary header file
    - Fix wrong access at read interrupt
    - The recent OneNAND has 4KiB pagesize

    Also Board can override OneNAND IPL image

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit a05e3f9a084fc8951d87745b3a91df246432df7d
Author: Shinya Kuribayashi <skuribay@pobox.com>
Date:   Sat Sep 12 18:01:40 2009 +0900

    MIPS: VCT: Remove read_spareram reference

    The commit ecad289fc6bd9d89ef4d5093cc7b6fd712fd0d29 (OneNAND: Remove
    unused read_spareram and add unlock_all as kernel does) forgot to remove
    a local reference to read_spareram in board/micronas/vct/ebi_onenand.c,
    which causes the following build failure when configured with OneNAND:

    ebi_onenand.c: In function 'onenand_board_init':
    ebi_onenand.c:196: error: 'struct onenand_chip' has no member named 'read_spareram'
    make[1]: *** [ebi_onenand.o] Error 1
    make[1]: *** Waiting for unfinished jobs....
    make: *** [board/micronas/vct/libvct.a] Error 2

    Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
    Acked-by: Stefan Roese <sr@denx.de>
    Cc: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit ef37c6835eac66206a9c7c11f0c7186f5d64bf91
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Fri Sep 25 14:05:57 2009 +0200

    ubifs: Correct dereferencing of files-after-symlinks

    Files in directories which are symlinked to were not dereferenced
    correctly in last commit. E.g., with a symlink

       /boot/lnk -> /boot/real_dir

    loading

       /boot/lnk/uImage

    will fail. This patch fixes that by simply seeing to it that the target
    base directory has a slash after it.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit b306db2f1bf561b5823a655c677fe28cfad80cfb
Author: Stefan Roese <sr@denx.de>
Date:   Thu Sep 24 14:10:30 2009 +0200

    ppc4xx: Remove mtsdram0() marcos and use common mtsdram() instead

    Additionally some whitespace coding style fixes.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 95b602bab5fec2fffab07a01ea3947c70d1bacc1
Author: Stefan Roese <sr@denx.de>
Date:   Thu Sep 24 13:59:57 2009 +0200

    ppc4xx: Convert PPC4xx SDRAM defines from lower case to upper case

    The latest PPC4xx register cleanup patch missed some SDRAM defines.
    This patch now changes lower case UIC defines to upper case. Also
    some names are changed to match the naming in the IBM/AMCC users
    manuals (e.g. mem_mcopt1 -> SDRAM0_CFG).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 952e7760bfc5b0e3b142b9ce34e7fbb7d008c900
Author: Stefan Roese <sr@denx.de>
Date:   Thu Sep 24 09:55:50 2009 +0200

    ppc4xx: Convert PPC4xx UIC defines from lower case to upper case

    The latest PPC4xx register cleanup patch missed the UIC defines.
    This patch now changes lower case UIC defines to upper case.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d1c9e5b37901b53ffc1ce3f08ec8ed61bfd557b6
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Date:   Tue Sep 22 13:40:44 2009 +0200

    fsl_i2c: Do not generate STOP after read.

    __i2c_read always ends with a STOP condition thereby releasing
    the bus. It is cleaner to do the STOP magic in i2c_read(), like
    i2c_write() does. This may also help future multimaster systems which
    wants to hold on to the bus until all transactions are finished.

    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

commit 99404202127346b9e91503bbd69deafa18c980c4
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Date:   Thu Sep 17 11:07:17 2009 +0200

    fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR

    The latest AN2919 has changed the way FDR/DFSR should be calculated.
    Update the driver according to spec. However, Condition 2
    is not accounted for as it is not clear how to do so.

    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
    Acked-by: Wolfgang Grandegger <wg@grandegger.com>

commit d01ee4db9302cfccaa5c548a1c4e873b415681a0
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Date:   Thu Sep 17 11:07:16 2009 +0200

    fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}

    Some boards need a higher DFSR value than the spec currently
    recommends so give these boards the means to define there own.

    For completeness, add CONFIG_FSL_I2C_CUSTOM_FDR too.

    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

commit 21f4cbb77299788e2b06c9b0f48cf20a5ab00d4a
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Date:   Thu Sep 17 11:07:15 2009 +0200

    fsl_i2c: Wait for STOP condition to propagate

    After issuing a STOP one must wait until the STOP has completed
    on the bus before doing something new to the controller.

    Also add an extra read of SR as the manual mentions doing that
    is a good idea.

    Remove surplus write of CR just before a write, isn't required and
    could potentially disturb the I2C bus.

    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

commit c7190f028fa950d4d36b6d0b4bb3fc72602ec54c
Author: Kim Phillips <kim.phillips@freescale.com>
Date:   Fri Sep 25 18:19:44 2009 -0500

    mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields

    some LCRR bits are not documented throughout the 83xx family RMs.
    New board porters copying similar board configurations might omit
    setting e.g., DBYP since it was not documented in their SoC's RM.

    Prevent them bricking their board by retaining power on reset values
    in bit fields that the board porter doesn't explicitly configure
    via CONFIG_SYS_<registername>_<bitfield> assignments in the board
    config file.

    also move LCRR assignment to cpu_init_r[am] to help ensure no
    transactions are being executed via the local bus while CLKDIV is being
    modified.

    also start to use i/o accessors.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 00ec0ff549b8cb6fb6d40e275aeb5a460642a3bd
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Mon Sep 21 17:44:51 2009 -0400

    sbc8349: tidy up Makefile to use new configuration script.

    Commit 804d83a5 allows us to move all the configuration
    variation tweaks out of the top level Makefile and down
    into the board config header.  This takes advantage of
    that for the sbc8349 board.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit da6eea0f48c24a318e6de69d6bca0bb5ab70572b
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Wed Sep 16 23:22:08 2009 +0400

    mpc83xx: mpc8360emds: Add QE USB device tree fixups

    With this patch we can change QE USB mode without need to hand-edit
    the device tree.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 89da44ce3fe1638312d71cb3add8c6a6d2c7c1f3
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Wed Sep 16 23:21:59 2009 +0400

    mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs

    This patch fixes various ethernet issues with gigabit links handling
    in U-Boot. The workarounds originally implemented by Kim Phillips for
    Linux kernel.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 034477bb31948d698d18b84bc0834c3e25a14d04
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Wed Sep 16 23:21:57 2009 +0400

    mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available

    Since commit 5c2ff323a94e27e481f70c44838d43fcd844dd46 ("mpc8360emds:
    rework LBC SDRAM setup"), LBC SDRAM is available for use in Linux.

    Though, it appears that QE Ethernet in Gigabit mode can't transmit
    large packets when it tries to work with a data in LBC SDRAM (memtest
    didn't discover any issues, is LBC SDRAM just too slow?).

    With this patch we can still use the board without DDR memory, but
    if DDR is available, we don't use LBC SDRAM.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit d77c779bc23596aa3693d1c5c4d5b6e1072f93f2
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Wed Sep 16 23:21:55 2009 +0400

    net: uec: Fix uccf.h and uec.h headers to include headers they depend on

    Headers should include headers containing prototypes and defines they
    depend on, don't assume that they're included by somebody else.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 6185f80c311cc3bdef2f8d5096c61e40ca6f48b2
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Wed Sep 16 23:21:53 2009 +0400

    net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs

    This will be needed for MPC8360E-MDS boards with rev. 2.1 CPUs.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 984f10baac8ef6032df52f135943d6b0bc96f724
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 25 14:16:00 2009 +0200

    mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 6e748ea004473cce99fbde6382dd580c10ffdb60
Author: Ken MacLeod <ken@bitsko.slc.ut.us>
Date:   Fri Sep 11 15:16:18 2009 -0500

    cmd_fdt.c: fix parse of byte streams and strings

    Commit 4abd844d8e extended the fdt command parser to handle property
    strings which are split across multiple arguments but it was broken for
    byte streams and strings.

    Byte stream parsing:

     * Fixes where it would terminate early or go into an endless loop.

     * Fixes a 0x00 being inserted into the data if there is a space after
       '[' or a separate argument.

     * Fixes dereferencing the argument pointer after the last argument.

     * Checks for bad characters.

    String parsing:

     * Treat multiple arguments as a string list.  This fixes an issue where
       only the last argument was stored.

    Signed-off-by: Ken MacLeod <ken@bitsko.slc.ut.us>

commit 3887c3fbdbbe6bbb4df60ed415c8e1ab9fe56b5e
Author: Heiko Schocher <hs@denx.de>
Date:   Wed Sep 23 07:56:08 2009 +0200

    mucmc52, uc101: delete ata@3a00 node, if no CF card is detected

    U-Boot can detect if an IDE device is present or not.
    If not, and this new config option is activated, U-Boot
    removes the ATA node from the DTS before booting Linux,
    so the Linux IDE driver does not probe the device and
    crash. This is needed for buggy hardware (uc101) where
    no pull down resistor is connected to the signal IDE5V_DD7.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 7f625fc6d3ba8f890e843ac01717804c2462ed53
Author: Heiko Schocher <hs@denx.de>
Date:   Wed Sep 23 07:56:04 2009 +0200

    mpc5200, mucmc52, uc101: config cleanup

    - As these boards are similiar, collect common config options
      in manroland/common.h and manroland/mpc52xx-common.h
      for mpc5200 specific common options for this manufacturer.
    - add OF support
    - update default environment

    Signed-off-by: Heiko Schocher <hs@denx.de>

    Minor edit of commit message.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 9d142ea8f787882ab732fa531a34db091bfa363d
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 25 00:57:49 2009 +0200

    Fix "ppc/85xx: Clean up use of LAWAR defines" breakage

    Commit 002741ae86 modified include/asm-ppc/mmu.h such that the LAWAR_
    defines were only enabled for the 83xx platform, but they are also
    needed on MPC512x system. Enabling these for E300 systems seems thus
    more appropriate.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit a5aa3998ab6408a6ac738a3ce8005e647b9465f8
Author: Martha M Stan <mmarx@silicontkx.com>
Date:   Mon Sep 21 14:08:00 2009 -0400

    Add Elpida Memory Configuration to mpc5121ads Boards

    Signed-off-by: Martha M Stan <mmarx@silicontkx.com>

    Minor coding style cleanup.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 054197ba8ee5ef1e41694df58531b6e53ec43f2d
Author: Martha M Stan <mmarx@silicontkx.com>
Date:   Mon Sep 21 14:07:14 2009 -0400

    mpc512x: Streamlined fixed_sdram() init sequence.

    Signed-off-by: Martha M Stan <mmarx@silicontkx.com>

    Minor cleanup:

    Re-ordered default_mddrc_config[] to have matching indices.

    This allows to use the same index "N" for source and target fields;
    before, we had code like this

        out_be32(&im->mddrc.ddr_time_config2, mddrc_config[3]);

    which always looked like a copy & paste error because 2 != 3.

    Also, use NULL when meaning a null pointer.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 39aaca1f66a0e5b1204b0789f6c0097938c00ad1
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Mar 19 02:46:19 2009 -0500

    ppc/p4080: Determine various chip frequencies on CoreNet platforms

    The means to determine the core, bus, and DDR frequencies are completely
    new on CoreNet style platforms.  Additionally on p4080 we can have
    different frequencies for FMAN and PME IP blocks.  We need to keep track
    of the FMAN & PME frequencies since they are used for time stamping
    capabilities inside each block.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3c2a67eec8a0facc865b400caca52e7f6b7adf01
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 17 01:52:37 2009 -0500

    ppc/p4080: Handle timebase enabling and frequency reporting

    On CoreNet style platforms the timebase frequency is the bus frequency
    defined by 16 (on PQ3 it is divide by 8).  Also on the CoreNet platforms
    the core not longer controls the enabling of the timebase.  We now need
    to enable the boot core's timebase via CCSR register writes.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 7e4259bba4c56536760e42d32dacfb3233f216fd
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Mar 19 02:39:17 2009 -0500

    ppc/p4080: Add various p4080 related defines (and p4040)

    There are various locations that we have chip specific info:

    * Makefile for which ddr code to build
    * Added p4080 & p4040 to cpu_type_list and SVR list
    * Added number of LAWs for p4080
    * Set CONFIG_MAX_CPUS to 8 for p4080

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 39a7e7fd538cdf49e7e8a2f0634ea5e15e12b4ec
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 17 01:44:39 2009 -0500

    ppc/p4080: CoreNet platfrom style secondary core release

    The CoreNet platform style of bringing secondary cores out of reset is
    a bit different that the PQ3 style.  Mostly the registers that we use
    to setup boot translation, enable time bases, and boot release the cores
    have moved around.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a880cf3e0e1c220d780eccd0b101170c4499485d
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 17 01:44:00 2009 -0500

    ppc/p4080: CoreNet platfrom style CCSRBAR setting

    On CoreNet based platforms the CCSRBAR address is split between an high &
    low register and we no longer shift the address.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 418ec8584343f04048e2cc7ee96b6b29be54ad97
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Mar 19 02:32:23 2009 -0500

    ppc/p4080: Add support for CoreNet style platform LAWs

    On CoreNet based platforms the LAW address is split between an high &
    low register and we no longer shift the address.  Also, the target IDs
    on CoreNet platforms have been completely re-assigned.

    Additionally, added a new find_law() API to which LAW an address hits in.
    This is need for the CoreNet style boot release code since it will need
    to determine what the target ID should be set to for boot window
    translation.

    Finally, enamed LAWAR_EN to LAW_EN and moved to header so we can use
    it elsewhere.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 01df521217957d77d53c2d570183eded7030938f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Sep 16 09:43:12 2009 -0500

    ppc/p4080: Add p4080 platform immap definitions

    The p4080 SoC has a significant amount of commonality with the 85xx/PQ3
    platform.  We reuse the 85xx immap and just add new definitions for
    local access and global utils.  The global utils is now broken into
    global utils, clocking and run control/power management.

    The offsets from CCSR for a number of blocks have also changed.  We
    introduce the CONFIG_FSL_CORENET define to distinquish the PQ3 style of
    platform from the new p4080 platform.  We don't use QoirQ as there are
    products (like p2020) that are PQ3 based platforms but have the QoirQ
    name.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 25bacf7a2b096496e2c58f2de4e5b2bce8fba038
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Tue Sep 22 15:45:44 2009 -0500

    ppc/85xx: Fix enabling of L2 cache

    We need to flash invalidate the locks in addition to the cache
    before we enable.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit cb0ff65c619efacdc0ba69aa8ee6ede7dd364a38
Author: Vivek Mahajan <vivek.mahajan@freescale.com>
Date:   Tue Sep 22 12:48:27 2009 +0530

    85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQ

    The code assumed names where just numbers and always prefixed 'mpc'.
    However newer QorIQ don't follow the mpc naming scheme.

    Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 234a89d911ce28e46372f555d7c14e28424f2b0d
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Tue Sep 22 14:53:21 2009 +0800

    ppc/85xx: add cpu init config file for boot from NAND

    When boot from NAND, the NAND flash must be connected to br/or0.
    Also init RAM(L2 SRAM or DDR SDRAM) for load the second image to
    it.

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 266139b88b43ae1d87abb5f5431e6f57b801795f
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Tue Sep 22 14:53:34 2009 +0800

    immap_85xx: add porpllsr's plat ratio definition

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 098bcbae3172d73d24ca8ba196328d901eed4132
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Tue Sep 22 14:53:10 2009 +0800

    ppc/85xx: add ld script file for boot from NAND

    The first stage 4K image uses a seperate ld script file to
    generate 4K image. This patch moves it to the cpu/mpc85xx/*
    to make it avaliable for 85xx platform.

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 8439f05cfd8cbb38485376a34d9fe297ba262737
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 23:09:28 2009 -0500

    mpc8610hpcd: Use common 86xx fdt fixup code

    Using the common 86xx fdt fixups removes some board-specific code and
    should make the mpc8610hpcd easier to maintain in the long run.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 928435d11b898870415910efff87a4d6399cecb8
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Mon Sep 21 17:19:17 2009 -0400

    sbc85x0: tidy up Makefile to use new configuration script.

    Commit 804d83a5 allows us to move all the configuration
    variation tweaks out of the top level Makefile and down
    into the boards config header.  This takes advantage of
    that for the sbc8540/sbc8560 boards.

    There were a couple of cheezy comments pointing at incorrect
    files, or files that don't exist, so I've cleaned those up too.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 2738bc8df65ec905094d83f62f87fed123a03b9c
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Sun Sep 20 20:36:06 2009 -0400

    sbc8548: allow enabling PCI via a make config option

    Prior to this commit, to enable PCI, you had to go manually
    edit the board config header, and if you had 33MHz PCI, you
    had to manually change CONFIG_SYS_NS16550_CLK too, which was
    not real user friendly,

    This adds the typical PCI and clock speed make targets to the
    toplevel Makefile in accordance with what is being done with
    other boards (i.e. using the "-t" to mkconfig).

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit fdc7eb90b504daa020f290604d50da8f7cb70d8a
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Sun Sep 20 20:36:05 2009 -0400

    sbc8548: update PCI/PCI-e support code

    The PCI/PCI-e support for the sbc8548 was based on an earlier
    version of what the MPC8548CDS board was using, and in its
    current state it won't even compile.  This re-syncs it to match
    the latest codebase and makes use of the new shared PCI functions
    to reduce board duplication.

    It borrows from the MPC8568MDS, in that it pulls the PCI-e I/O
    back to 0xe280_0000 (where PCI2 would be on MPC8548CDS), and
    similarly it coalesces the PCI and PCI-e mem into one single TLB.

    Both PCI-x and PCI-e have been tested with intel e1000 cards
    under linux (with an accompanying dts change in place)

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a8b3e90f798e0cca5f11c912f9d0823a1c5b6c24
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Sun Sep 20 20:36:01 2009 -0400

    fsl_pci: create a SET_STD_PCI_INFO() helper wrapper

    Recycle the recently added PCI-e wrapper used to reduce board
    duplication of code by creating a similar version for plain PCI.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 11d5a629f8a40f9d7cffc74e58f4e3ed258e56ab
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Sun Sep 20 20:36:04 2009 -0400

    sbc8548: correct local bus SDRAM size from 64M to 128M

    The size of the LB SDRAM on this board is 128MB, spanning CS3
    and CS4.  It was previously only being configured for 64MB on
    CS3, since that was what the original codebase of the MPC8548CDS
    had.  In addition to setting up BR4/OR4, this also adds the TLB
    entry for the second half of the SDRAM.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0c7e4d45d9fb3c9e503ee93d50572d346dae150e
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Sun Sep 20 20:36:03 2009 -0400

    sbc8548: use I/O accessors

    Sweep throught the board specific file and replace the various
    register proddings with the equivalent I/O accessors.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit fc38eb98ff226f2c53eecbee033a6ab7619473dc
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Sun Sep 20 20:36:02 2009 -0400

    sbc8548: remove eTSEC3/4 voltage hack

    With only eTSEC1 and 2 being brought out to RJ-45 connectors, we
    aren't interested in the eTSEC3/4 voltage hack on this board

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9b3ba24f18900633a394416cc056c44a1a6eb754
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Sep 18 19:08:41 2009 -0400

    sbc8548: enable access to second bank of flash

    The sbc8548 has a 64MB SODIMM flash module off of CS6 that
    previously wasn't enumerated by u-boot.  There were already
    BR6/OR6 settings for it [used by cpu_init_f()] but there
    was no TLB entry and it wasn't in the list of flash banks
    reported to u-boot.

    The location of the 64MB flash is "pulled back" 8MB from
    a 64MB boundary, in order to allow address space for the
    8MB boot flash that is at the end of 32 bit address space.
    This means creating two 4MB TLB entries for the 8MB chunk,
    and then expanding the original boot flash entry to 64MB
    in order to cover the 8MB boot flash and the remainder
    (56MB) of the user flash.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ded58f4153923dfff16d2f96495bd7acf1f7e10e
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Wed Sep 23 17:30:57 2009 -0400

    sbc8548: cosmetic line re-wrap

    Fix the extra long lines to be consistent with u-boot coding style.
    No functional change here.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

commit 2c40acd3525b75db3fcd3f5a5bd40445679b5547
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Sep 18 19:08:40 2009 -0400

    sbc8548: get_clock_freq is not valid for this board

    The get_clock_freq() comes from freescale/common/cadmus.c and is
    only valid for the CDS based 85xx reference platforms.  It would
    be nice if we could read the 33 vs. 66MHz status somehow, but in
    the meantime, tie it to CONFIG_SYS_CLK_FREQ like all the other
    non-CDS boards do.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 7b1f1399e876587e0a268a5a471dd444bfbc3114
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Sep 18 19:08:39 2009 -0400

    sbc8548: delete unused MPC8548CDS info carried over from port

    There are a couple defines and PCI bridge quirks related to the PCI
    backplane of the MPC8548CDS that have no meaning in the context of
    the port to the sbc8548 board, so delete them.

    Also, the form factor of the sbc8548 is a standalone board with a
    single PCI-X and a single PCI-e slot.  That pretty much guarantees
    that it will never be a PCI agent itself, so the host/agent and root
    complex/end node distinctions have been removed.

    Similarly, since there is no physical connector mapping to PCI2, so
    all references of PCI2 in the board support files have been removed
    as well.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 94ca091456d5c3040ddd6351c80cf3e74393f9be
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Sep 18 19:08:44 2009 -0400

    sbc8548: enable use of PCI network cards

    Create a board_eth_init to allow a place to hook in
    the PCI ethernet init after all the eTSEC are up
    and configured.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 82b7725b6d46d9ad2b962b4cdfa896bd5ee32fb5
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Sat Sep 19 17:50:17 2009 +0530

    ppc/85xx: 32bit DDR changes for P1020/P1011

    The P1020/P1011 SOCs support max 32bit DDR width as opposed to P2020/P2010
    where max DDR data width supported is 64bit.

    As a next step the DDR data width initialization would be made more dynamic
    with more flexibility from the board perspective and user choice.
    Going forward we would also remove the hardcodings for platforms with onboard
    memories and try to use the FSL SPD code for DDR initialization.

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit bd42bbb858dde713f023fc2e4f512ec174a1a8d2
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Sep 18 19:08:46 2009 -0400

    sbc8548: replace README with completely new document

    The previous README.sbc8548 was pretty much content-free. Replace
    it with something that actually gives the end user some relevant
    hardware details, and also lists the u-boot configuration choices.

    Also in the cosmetic department, fix the bogus line in the Makefile
    that was carried over from the SBC8560 Makefile, and the typo in
    the sbc8548.c copyright.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 002741ae862c1c7e3dad89d020e392e6add1c05d
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Sat Sep 19 11:20:54 2009 -0500

    ppc/85xx: Clean up use of LAWAR defines

    On 85xx platforms we shouldn't be using any LAWAR_* defines
    but using the LAW_* ones provided by fsl-law.h.  Rename any such
    uses and limit the LAWAR_ to the 83xx platform as the only user so
    we will get compile errors in the future.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f61dae7c9dc526410faec15ce352b11fc36a560b
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 3 10:20:09 2009 -0500

    ppc/85xx: Clean up mpc8572DS PCI setup code

    Use new fsl_pci_init_port() that reduces amount of duplicated code in the
    board ports, use IO accessors and clean up printing of status info.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 4958af8735207640181c4423e41b24ee7418361a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 3 09:42:01 2009 -0500

    ppc/85xx: Clean up p2020ds PCI setup code

    Use new fsl_pci_init_port() that reduces amount of duplicated code in the
    board ports, use IO accessors and clean up printing of status info.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 93a83872c707891bad22f7776d79a650c870601f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 3 10:09:04 2009 -0500

    ppc/85xx: Clean up p1_p2_rdb PCI setup

    General code cleanup to use in/out IO accessors as well as making
    the code that prints out info sane between board and generic fsl pci
    code.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 62ca21c442e18fec118ec83e183d64ea49966ce7
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 10 16:31:53 2009 -0500

    ppc/85xx: Simplify the top makefile for P1_P2_RDB boards

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a0f9e0e0f06033807de0ae017ad4d9cf5ddff84b
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 10 16:26:37 2009 -0500

    ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f9edcc10e6cb497dd7dcbaf691cfd1859abae27a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 10 16:23:45 2009 -0500

    ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0e905ac28b1e039d74e63232293972bff6b5a0ce
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Fri Sep 18 11:45:09 2009 +0800

    ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 202d94875c98b7b573f136c4f353609758ed9733
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Tue Sep 15 22:21:58 2009 -0500

    ppc/85xx: Fix LCRR_CLKDIV defines

    For some reason the CLKDIV field varies between SoC in how it interprets
    the bit values.

    All 83xx and early (e500v1) PQ3 devices support:
     clk/2: CLKDIV = 2
     clk/4: CLKDIV = 4
     clk/8: CLKDIV = 8

    Newer PQ3 (e500v2) and MPC86xx support:
     clk/4: CLKDIV = 2
     clk/8: CLKDIV = 4
     clk/16: CLKDIV = 8

    Ensure that the MPC86xx and MPC85xx still get the same behavior and make
    the defines reflect their logical view (not the value of the field).

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Peter Tyser <ptyser@xes-inc.com>

commit 55f786d8ba8ce58a81428536da34a2192b9bad9f
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 12:04:33 2009 -0500

    MAKEALL: Use POSIX math

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 40a28f0885e62b6607e12ed6baa6284927f5263e
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Mon Sep 21 12:04:32 2009 -0500

    MAKEALL: Add summary information

    This change adds some basic summary information to the MAKEALL script.
    The summary information includes how many boards were compiled, how many
    boards had compile warnings or errors, and which specific boards had
    compile warnings or errors.

    This information is useful when doing compile testing to quickly
    determine which boards are broken.

    As a side benefit, no empty $BOARD.ERR files are generated by MAKEALL.
    Previously, each board had a corresponding $BOARD.ERR file, even if the
    board compiled cleanly.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 71ce9bd7f551e44c4ddb4c985c095da6d3452d79
Author: Eric Millbrandt <emillbrandt@coldhaus.com>
Date:   Mon Sep 21 11:05:55 2009 -0500

    galaxy5200: enable version environment variable

    Add version environment variable configuration to the galaxy5200
    board header file.

    Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>

    Edited commit message.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit c569ad6e1e8768a0fec513ffc156412240b7eb35
Author: Werner Pfister <werner.pfister@intercontrol.de>
Date:   Mon Sep 21 14:49:56 2009 +0200

    digsy_mtc: Add TCR register value for RTC (DS1339)

    Signed-off-by: Werner Pfister <werner.pfister@intercontrol.de>
    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit b0078c8792badd81aed51b7eabe85e960036361c
Author: Werner Pfister <werner.pfister@intercontrol.de>
Date:   Mon Sep 21 14:49:55 2009 +0200

    rtc/ds1337.c: Allow to set TCR register

    This is needed to correctly start the charging of an attached capacitor
    or battery.

    Signed-off-by: Werner Pfister <werner.pfister@intercontrol.de>
    Signed-off-by: Detlev Zundel <dzu@denx.de>

commit 9d7952e4c636b8c99289a44dbe28c6f93c43b9f7
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Tue Sep 15 09:53:29 2009 +0200

    ubifs: Add support for looking up directory and relative symlinks

    This patch adds support for resolving symlinks to directories as well as
    relative symlinks. Symlinks are now always resolved during file lookup,
    so the load stage no longer needs to special-case them.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit fcdb36b85ac033c09a9762a0a14808f7cb2ed54c
Author: Rupjyoti Sarmah <rsarmah@amcc.com>
Date:   Mon Sep 21 11:26:19 2009 -0700

    ppc4xx: Fix PCIE PLL lock on 440SPe Yucca board

    u-boot reports a PCIE PLL lock error at boot time on Yucca board, and
    left PCIe nonfunctional. This is fixed by making u-boot function
    ppc4xx_init_pcie() to wait 300 uS after negating reset before the
    first check of the PLL lock.

    Signed-off-by: Rupjyoti Sarmah <rsarmah@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 91d599044caac4a8c228115b16cf3b073f902080
Author: Dirk Eibach <eibach@gdsys.de>
Date:   Mon Sep 21 13:27:14 2009 +0200

    ppc4xx: Make DDR2 timing for intip more robust

    DDR2 timing for intip was on the edge for some of the available chips
    for this board. Now it is verfied to work with all of them.

    Signed-off-by: Dirk Eibach <eibach@gdsys.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 184a3a27f5cd2c64666f74df94c86b94c4383ef8
Author: Wolfgang Denk <wd@denx.de>
Date:   Tue Sep 15 00:26:02 2009 +0200

    board/linkstation/ide.c: Fix compile warning

    Fix warning: ide.c:60: warning: dereferencing type-punned pointer will
    break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Guennadi Liakhovetski <lg@denx.de>

commit 004eca0c9ba328de457d5dc9ef8805639dfef893
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Wed Sep 16 22:03:08 2009 -0500

    ppc: Clean up calling of phy_reset() during init

    Remove board-specific #ifdefs for calling phy_reset() during
    initializtion

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 3a8f28d0a6d9f8505017680233064c13e4587174
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Wed Sep 16 22:03:07 2009 -0500

    ppc: Clean up calling of misc_init_r() during init

    Remove board-specific #ifdefs for calling misc_init_r() during
    initializtion

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Acked-by: Heiko Schocher <hs@denx.de>

commit 3202d33169df04da5cf3dea8c5ab0a902b90ecaa
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Wed Sep 16 21:38:10 2009 -0500

    Remove deprecated 'autoscr' command/variables

    The more standard 'source' command provides identical functionality to
    the autoscr command.

    Environment variable names/values on the MVBC_P, MVBML7, kmeter1,
    mgcoge, and km8xx boards are updated to no longer refernce 'autoscr'.

    The 'autoscript' and 'autoscript_uname' environment variables are
    also removed.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
    Acked-by: Heiko Schocher <hs@denx.de>

commit d3f4941874a20d8a390a36ba71335ae1db2f9ba0
Author: Paul Gibson <paul.gibson2074@gmail.com>
Date:   Wed Sep 16 10:05:00 2009 +1000

    mpc512x. Micron nand flash needs a reset before a read command is issued.

    Micron nand flash needs a reset before a read command is issued.
    The current mpc5121_nfc driver ignores the reset command.

commit b55ae40249545eabb9d6bfb850b1400a32561b1f
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:   Wed Sep 9 21:18:41 2009 +0200

    FDT: remove obsolete OF_CPU and OF_SOC macros.

    Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
    Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
    Acked-by: Heiko Schocher <hs@denx.de>

commit 3b6a9267f0de7b85d387fa4123d0b58379363447
Author: Wolfgang Denk <wd@denx.de>
Date:   Tue Sep 15 00:09:21 2009 +0200

    board/flagadm/flash.c: fix compile warning

    Fix warning: flash.c:531: warning: dereferencing type-punned pointer
    will break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Kári Davíðsson <kd@flaga.is>

commit 0413cfecea350000eab5e591a0965c3e3ee0ff00
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Thu Sep 17 15:15:52 2009 +0200

    Correct ffs/fls regression for PowerPC etc

    Commits

      02f99901ed1c9d828e3ea117f94ce2264bf8389e
      52d61227b66d4099b39c8309ab37cb67ee09a405

    introduced a regression where platform-specific ffs/fls implementations
    were defined away. This patch corrects that by using PLATFORM_xxx
    instead of the name itself.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
    Acked-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Stefan Roese <sr@denx.de>

commit e67af44d0167d8237dd2c2ddf8e301d19ca12914
Author: Stefan Roese <sr@denx.de>
Date:   Mon Sep 14 11:13:34 2009 +0200

    ppc4xx: Consolidate get_OPB_freq()

    All 4xx variants had their own, mostly identical get_OPB_freq()
    function. Some variants even only had the OPB frequency calculated
    in this routine and not supplied the sys_info.freqOPB variable
    correctly (e.g. 405EZ). This resulted in incorrect OPB values passed
    via the FDT to Linux.

    This patch now removes all those copies and only uses one function
    for all 4xx variants (except for IOP480 which doesn't have an OPB).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 84a45d33c2cc261dbd5411f7c2ad45f6003025b6
Author: Stefan Roese <sr@denx.de>
Date:   Fri Sep 11 17:09:45 2009 +0200

    ppc4xx: Enable commands for FDT enabled Linux booting on AMCC Acadia

    Acadia still used the "old" arch/ppc bootm commands for booting
    Linux images without FDT. This patch now enables these fdt-aware
    boot commands for Acadia as well.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 95a4a593b577b6e2f1da2d4b0f5ec86975c33413
Author: Stefan Roese <sr@denx.de>
Date:   Fri Sep 11 17:07:55 2009 +0200

    ppc4xx: Fix 405EZ uart base baud calculation

    With this fix, Linux correctly configures the baudrate when booting
    with FDT passed from U-Boot to Linux.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 15fba3279b56333bdb65ead366f82c945ed320d1
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Fri Sep 11 15:28:41 2009 -0500

    ppc/85xx: Disable all async interrupt sources when we boot

    We should make sure to clear MSR[ME, CE, DE] when we boot an OS image
    since we have changed the exception vectors and the OSes vectors might
    not be setup we should avoid async interrupts at all costs.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9f00409a9d04cf533305531da32437130802f3a3
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Fri Sep 11 13:52:45 2009 -0500

    ppc/85xx: Split out cpu_init_early into its own file for NAND_SPL

    By pulling out cpu_init_early we can build just it and not all of
    cpu_init for NAND_SPL.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0456dbf3475d0aec42873a967ac97ed81f376119
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Fri Sep 11 13:41:49 2009 -0500

    ppc/85xx: Change cpu_init_early_f so we can use with NAND SPL

    Use write_tlb and don't use memset so we can use the same code for
    cpu_init_early_f between NAND SPL and not.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 6e1385d5f8d137e741dfef02465d7dc328040ad7
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Fri Sep 11 10:53:08 2009 +0800

    NAND boot: change NAND loader's relocate SP to CONFIG param

    So that we can set the NAND loader's relocate stack pointer
    to the value other than the relocate address + 0x10000.

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Acked-by: Kim Phillips <kim.phillips@freescale.com>
    Acked-by: Scott Wood <scottwood@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 7da53351d817c6d77364cfde922891f37d0e5ed8
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Fri Sep 11 14:19:10 2009 +0800

    ppc/85xx: add boot from NAND/eSDHC/eSPI support

    The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch
    implements these three bootup methods in a unified way - all of these
    use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM
    which lets us use the SPD to initialize the SDRAM.

    For all three bootup methods, the bootup process can be divided into two
    stages: the first stage will initialize the corresponding controller,
    configure the L2SRAM, then copy the second stage image to L2SRAM and
    jump to it. The second stage image is just like the general U-Boot image
    to configure all the hardware and boot up to U-Boot command line.

    When boot from NAND, the eLBC controller will first load the first stage
    image to internal 4K RAM buffer because it's also stored on the NAND
    flash. The first stage image, also call 4K NAND loader, will initialize
    the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K
    NAND loader's code comes from the corresponding nand_spl directory, along
    with the code twisted by CONFIG_NAND_SPL.

    When boot from eSDHC/eSPI, there's no such a first stage image because
    the CPU ROM code does the same work. It will initialize the L2SRAM
    according to the config addr/word pairs on the fixed address and
    initialize the eSDHC/eSPI controller, then load the second stage image
    to L2SRAM and jump to it.

    The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the
    second stage image for all different bootup methods. It's set in the
    board config file when one of the bootup methods above is selected.

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit b2eec281a811bb52941f61203d8fe35256b3582c
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Fri Sep 11 12:32:01 2009 -0500

    ppc/85xx: Move code around to prep for NAND_SPL

    If we move some of the functions in tlb.c around we need less
    ifdefs.  The first stage loader just needs invalidate_tlb and
    init_tlbs.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 206af3527c05e520e28d38a48a1d15433e34675d
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Fri Sep 11 11:30:30 2009 -0500

    ppc/85xx: Repack tlb_table to save space

    We can pack the initial tlb_table in MAS register format and use
    write_tlb to set things up.  This savings can be helpful for NAND
    style first stage boot loaders.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit d30f9043539d372cf66406bc2f21bb8c20e67009
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Fri Sep 11 11:27:00 2009 -0500

    ppc/85xx: Introduce low level write_tlb function

    Factor out the code we use to actually write a tlb entry.

    set_tlb is a logical view of the TLB while write_tlb is a low level
    matching the MAS registers.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0ead6f2ed7cf4e1f70dab5b529ad121e38359485
Author: Roy Zang <tie-fei.zang@freescale.com>
Date:   Thu Sep 10 14:44:48 2009 +0800

    ppc/85xx: Enable usb ehci support for p2020ds board

    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 6d8565a1ed5acb01bad4a4cd74a93be5f7fb7f7c
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 10 14:54:55 2009 -0500

    ppc/8xxx: Misc DDR related fixes

    * Fix setting of ESDMODE (MR1) register - the bit shifting was wrong
    * Fix the format string to match size in a debug print

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3e3c9c157b89eab2dc2f897899b1b95cd70c1a58
Author: Scott Wood <scottwood@freescale.com>
Date:   Thu Aug 20 17:45:00 2009 -0500

    ppc/85xx: Remove some bogus code from external interrupt handler.

    Skipping the interrupted instruction will accomplish nothing other
    than turning a spurious interrupt into a crash.

    External interrupts are not machine checks, so don't count them as such.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit dcc87dd58db466caa2d66755c5ec9455edf42fe8
Author: Scott Wood <scottwood@freescale.com>
Date:   Thu Aug 20 17:45:05 2009 -0500

    ppc/85xx: Ensure that MAS8 is zero when writing TLB entries.

    Its reset value is random, and we sometimes read uninitialized TLB
    arrays.  Make sure that we don't retain MAS8 from reading such an entry
    if the VF bit in MAS8 is set, attempts to use the mapping will trap.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 1b72dbecca2d7ad7a21c92d80227daa2d8ec5a57
Author: Scott Wood <scottwood@freescale.com>
Date:   Thu Aug 20 17:44:20 2009 -0500

    ppc/85xx: Don't enable interrupts before we're ready

    We cannot handle any exceptions while running in AS1, as the exceptions
    will transition back to AS0 without a valid mapping.

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 3ca55bce9c8bf00df06a20487fafc16fa2f8084b
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:   Fri Sep 11 07:50:33 2009 -0400

    mpc8260: remove Ethernet node fixup to use generic FDT code.

    Remove Ethernet node fixup from mgcoge and muas3001 boards and modify its
    configs for the common mpc8260 code to use generic Ethernet fixup.

    Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
    Tested-by: Heiko Schocher <hs@denx.de>

commit 1c20e4a9fbc531e2149ae061e8583f5fad82f163
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Sep 9 12:20:21 2009 -0400

    tools/netconsole: use ncb automatically if available

    The standard netcat, while ubiquitous, doesn't handle broadcast udp packets
    properly.  The local ncb util does however.  So if ncb can be located in
    the standard locations, automatically use that instead.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 770931805d292908a57a3d2c5f9a4fcde888b5a2
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Sep 9 12:20:20 2009 -0400

    tools/netconsole: make a bit more robust

    The netcat utility likes to exit when it receives an empty packet (as it
    thinks this means EOF).  This can easily occur when working with command
    line editing as this behavior will be triggered when using backspace.  Or
    with tabs and command line completion.  So create two netcat processes -
    one to only listen (and put it into a loop), and one to do the sending.
    Once the user quits the transmitting netcat, the listening one will be
    killed automatically.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit a6e19d69f63c14b7672c65ca4b014621c6fd0201
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Mon Aug 24 09:10:16 2009 +0200

    arm: Define test_and_set_bit and test_and_clear bit for ARM

    Needed for (e.g.) ubifs support to work.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>

commit 52d61227b66d4099b39c8309ab37cb67ee09a405
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Mon Aug 24 09:10:12 2009 +0200

    Define ffs/fls for all architectures

    UBIFS requires fls(), which is not defined for arm (and some other
    architectures) and this patch adds it. The implementation is taken from
    Linux and is generic. ffs() is also defined for those that miss it.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>

commit 4b15de08fe4d2c9d12a3764394731018a763216b
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Mon Aug 24 09:10:03 2009 +0200

    arm: Make arm bitops endianness-independent

    Bring over the bitop implementations from the Linux
    include/asm-generic/bitops/non-atomic.h to provide
    endianness-independence.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>

commit 02f99901ed1c9d828e3ea117f94ce2264bf8389e
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Mon Aug 24 09:09:50 2009 +0200

    Move __set/clear_bit from ubifs.h to bitops.h

    __set_bit and __clear_bit are defined in ubifs.h as well as in
    asm/include/bitops.h for some architectures. This patch moves
    the generic implementation to include/linux/bitops.h and uses
    that unless it's defined by the architecture.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>

commit 557555fe0b82940ba7cc69f81d31d6ef4d4933b4
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Fri Sep 4 19:54:45 2009 -0400

    standalone: convert to kbuild style

    Clean up the arch/cpu/board/config checks as well as redundant setting of
    srec/bin variables by using the kbuild VAR-$(...) style.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 804d83a563c47b55e1f14f5de3b6e9d7e2a7ef5e
Author: Wolfgang Denk <wd@denx.de>
Date:   Tue Sep 15 22:12:31 2009 +0200

    mkconfig: split the board make target to multiple config targets

    To simplify the top level makefile it useful to be able to parse
    the top level makefile target to multiple individual target, then
    put them to the config.h, leave the board config file to handle
    the different targets.

    Note that this method uses the '_'(underline) as the delimiter when
    splits the board make target.

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>

    This also reverts commit 511c02f611cb5afa1b8ca5980caaaabaa0de377f.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit ceb2d57c2205db5bbd868577f756c74a2568160c
Author: Wolfgang Denk <wd@denx.de>
Date:   Tue Sep 15 21:13:27 2009 +0200

    kwbimage.c: Fix compile warning when building on 64 bit systems (again)

    Commit 51003b89 attempted to fix a build problem on 64 bit systems,
    but just turned it into a build problem on 32 bit systems (silly me).

    Now do the Right Thing (TM) and use a "%zu" printf format.

    Also fix spelling error.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 6c7bc91fb3dba186d3398a1653f6db236510ffa7
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 11:30:34 2009 +0200

    board/amcc/common/flash.c: Fix compile warning

    Fix warning: ../common/flash.c:917: warning: dereferencing type-punned
    pointer will break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Stefan Roese <sr@denx.de>
    Acked-by: Stefan Roese <sr@denx.de>

commit 70fb809c563c340538264d2a9436135e74c38bfe
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 11:47:07 2009 +0200

    board/amcc/yucca/flash.c: Fix compile warning

    Fix warning: flash.c:919: warning: dereferencing type-punned pointer
    will break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Stefan Roese <sr@denx.de>
    Acked-by: Stefan Roese <sr@denx.de>

commit 030ec52f8cc83015f968db30208f4bd07feffa6c
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 11:44:39 2009 +0200

    board/amcc/taihu/flash.c: Fix compile warning

    Fix warnings:
    flash.c: In function 'write_word_1':
    flash.c:696: warning: dereferencing type-punned pointer will break strict-aliasing rules
    flash.c: In function 'write_word_2':
    flash.c:1044: warning: dereferencing type-punned pointer will break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Stefan Roese <sr@denx.de>
    Acked-by: Stefan Roese <sr@denx.de>

commit 0fd3d902d920f3e60f88530c33f1ae7581260951
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 11:37:20 2009 +0200

    board/etin/debris/phantom.c: Fix compile error

    Fix build problem caused by commit e84aba13: "Replace BCD2BIN and
    BIN2BCD macros with inline functions"

    phantom.c:163: error: redefinition of 'bcd2bin'
    /home/wd/git/u-boot/work/include/bcd.h:16: error: previous definition of 'bcd2bin' was here
    phantom.c:168: error: redefinition of 'bin2bcd'
    /home/wd/git/u-boot/work/include/bcd.h:21: error: previous definition of 'bin2bcd' was here

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Sangmoon Kim <dogoil@etinsys.com>

commit 5168801f4b71c2f8dcd92a80cfcfda84246e67fe
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 11:28:21 2009 +0200

    board/dave/common/flash.c: fix compile warning

    Fix warning: ../common/flash.c:668: warning: dereferencing type-punned
    pointer will break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Andrea Marson <andrea.marson@dave-tech.it>

commit 97138fc48091f2b063c4e32f36d05854b9d113fb
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 11:15:31 2009 +0200

    board/esd/cpci750/ide.c: fix compile warning

    Fix warning: ide.c:54: warning: dereferencing type-punned pointer will
    break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Cc: Stefan Roese <sr@denx.de>
    Acked-by: Stefan Roese <sr@denx.de>

commit ba73060cf4163bd5eb1711020126e2f7f62d363e
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 10:13:26 2009 +0200

    board/esd/common/flash.c: Fix compile warning

    Fix warning: ../common/flash.c:635: warning: dereferencing type-punned
    pointer will break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
    Cc: Stefan Roese <sr@denx.de>
    Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Acked-by: Stefan Roese <sr@denx.de>

commit 2d6d9f0848e952ea33c658dfba335685a2725b8b
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 09:36:31 2009 +0200

    sk98lin: fix compile warnings

    Fix warnings:
    skge.c: In function 'BoardInitMem':
    skge.c:1389: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skge.c:1390: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skge.c:1391: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skgesirq.c: In function 'SkGePortCheckUpXmac':
    skgesirq.c:1301: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skgesirq.c:1301: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skgesirq.c:1398: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skgesirq.c:1398: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skrlmt.c: In function 'SkRlmtInit':
    skrlmt.c:661: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c: In function 'SkMacPromiscMode':
    skxmac2.c:753: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c:753: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c: In function 'SkMacHashing':
    skxmac2.c:803: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c:803: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c: In function 'SkMacFlushTxFifo':
    skxmac2.c:1115: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c:1115: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c: In function 'SkMacFlushRxFifo':
    skxmac2.c:1145: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c:1145: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c: In function 'SkXmInitPauseMd':
    skxmac2.c:1987: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c:1987: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c: In function 'SkXmOverflowStatus':
    skxmac2.c:4236: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c:4236: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c:4242: warning: dereferencing type-punned pointer will break strict-aliasing rules
    skxmac2.c:4242: warning: dereferencing type-punned pointer will break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Ben Warren <biggerbadderben@gmail.com>

commit 3708e4cdb1f1d3d5128cf87be040d7e6b85f60dd
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 09:13:58 2009 +0200

    drivers/net/natsemi.c: fix compile warning

    Fix warning: natsemi.c:757: warning: dereferencing type-punned pointer
    will break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Ben Warren <biggerbadderben@gmail.com>

commit 78d19a398778a58d7b40b0c78e026515271b1a84
Author: Michal Simek <monstr@monstr.eu>
Date:   Mon Sep 7 09:08:02 2009 +0200

    net: emaclite: Cleanup license to be GPL compatible

    Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 0900bee9ab9818439b2d1298fa8909a88f74ec0d
Author: Michal Simek <monstr@monstr.eu>
Date:   Fri Aug 14 13:41:17 2009 +0200

    microblaze: Enable hush parser

    With Hush parser is possible to change command line in dtb

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 13916abf996b127b681ddc26664c236ded28ba7f
Author: Michal Simek <monstr@monstr.eu>
Date:   Thu Aug 20 22:44:02 2009 +0200

    microblaze: Remove AtmarkTechno Suzaku board

    Users should use microblaze-generic platform.
    This platform is longer not supported.

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 3ceba1d45d007144d10368f91ff9e36f3b5f39a1
Author: Michal Simek <monstr@monstr.eu>
Date:   Thu Aug 20 22:36:20 2009 +0200

    net: Remove old Xilinx Emac driver

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 2fddd44464d02e0f3ade06dabe0e165835fa61f0
Author: Michal Simek <monstr@monstr.eu>
Date:   Wed Aug 19 08:10:08 2009 +0200

    microblaze: Short size of global data and fix malloc size

    If is full malloc area global, data are rewrite because
    there was bad size of malloc area.

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit aedb4683097d3e5de8833f4a9e34664d3d2bd077
Author: Michal Simek <monstr@monstr.eu>
Date:   Fri Aug 14 17:02:35 2009 +0200

    microblaze: Add sbss, scommon and COMMON symbols for clearing

    Signed-off-by: Michal Simek <monstr@monstr.eu>

commit 4c1883670acbf1cc83c04df1876235c3aedde128
Author: Dirk Eibach <eibach@gdsys.de>
Date:   Wed Sep 9 12:36:07 2009 +0200

    ppc4xx: Rename compactcenter to intip

    Signed-off-by: Dirk Eibach <eibach@gdsys.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit d1c3b27525b664e8c4db6bb173eed51bfc8220de
Author: Stefan Roese <sr@denx.de>
Date:   Wed Sep 9 16:25:29 2009 +0200

    ppc4xx: Big cleanup of PPC4xx defines

    This patch cleans up multiple issues of the 4xx register (mostly
    DCR, SDR, CPR, etc) definitions:

    - Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
    - Change the defines to better match the names from the
      user's manuals (e.g. cprpllc -> CPR0_PLLC)
    - Removal of some unused defines

    Please test this patch intensive on your PPC4xx platform. Even though
    I tried not to break anything and tested successfully on multiple
    4xx AMCC platforms, testing on custom platforms is recommended.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d8d8724be06df43772162dc344ae20dfa814dc72
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 09:05:32 2009 +0200

    net/bootp.c: fix compile warning

    Fix warning: bootp.c:695: warning: dereferencing type-punned pointer
    will break strict-aliasing rules

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Ben Warren <biggerbadderben@gmail.com>

commit 51003b89816848cbe86a8fe48f970ba8b14005f5
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 11 08:58:11 2009 +0200

    kwbimage.c: Fix compile warning when building on 64 bit systems

    Fix this warning when building on 64 bit systems:
    tools/kwbimage.c: In function 'kwbimage_checksum32':
    tools/kwbimage.c:135: warning: format '%d' expects type 'int',
    but argument 4 has type 'long unsigned int'

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Prafulla Wadaskar <prafulla@marvell.com>

commit e7963772eb78a6aa1fa65063d64eab3a8626daac
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:   Wed Sep 9 21:11:18 2009 +0200

    muas3001: remove BRG clock node fixup to use common mpc8260 code.

    Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
    Acked-by: Heiko Schocher <hs@denx.de>

commit c7c1dbbf7159b38f3302b845dd97d28a543ff91b
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:   Wed Sep 9 21:09:00 2009 +0200

    r7780mp: fix typo in Ethernet chip model number comment.

    Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>

commit 45f89f340b4d8aa099fd022260dcb13cf3321b61
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date:   Wed Sep 9 21:22:08 2009 +0200

    ep8248: add support for device tree and secondary Ethernet interface.

    Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>

commit aa0c7a86cd236b8193218a09e1365c8991bb5ddc
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Sep 7 15:05:02 2009 +0530

    mkimage: Add Kirkwood Boot Image support (kwbimage)

    This patch adds support for "kwbimage" (Kirkwood Boot Image)
    image types to the mkimage code.

    For details refer to docs/README.kwbimage

    This patch is tested with Sheevaplug board

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
    Acked-by: Ron Lee <ron@debian.org>

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

commit 7809fbb9aafd60e3a6e5dfe456ae30b93ac61338
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Sep 7 14:59:09 2009 +0530

    Kirkwood: Sheevaplug: Add kwimage configuration file

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

commit b029dddc9ae958b1ccf875649f52c6db396a742d
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Sep 7 14:59:08 2009 +0530

    mkimage: Make table_entry code global

    - make get_table_entry_id() global
    - make get_table_entry_name() global
    - move struct table_entry to image.h

    Currently this code is used by image.c only.

    This patch makes this API global so it can be used by other parts of
    code, too.

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
    Acked-by: Ron Lee <ron.debian.org>

    Edit comments and commit message.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit f666dea8ab215c76c3c2a077ad299f90dd1ace7c
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Sep 7 14:59:07 2009 +0530

    mkimage: Make genimg_print_size() global

    Currently it is used by image.c only, but the the function can be
    used to support additional mkimage types like for example kwbimage,
    so make this function globally visible.

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

    Edited commit message.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 37b801888cf73b18f78c1109140ff44e3e37914f
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Sep 7 14:59:06 2009 +0530

    mkimage: Include missing files in build dependency calculations

    Include default_image.o and fit_image.o into the build dependency
    calculations. This makes sure they get rebuilt if any of the headers
    they include are modified

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
    Acked-by: Ron Lee <ron@debian.org>

    Edited commit message.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 3a2003f61ee79ac53d20c24cc896c2637a2dfc24
Author: Wolfgang Denk <wd@denx.de>
Date:   Wed Aug 19 11:42:56 2009 +0200

    tools/mkimage: fix compiler warnings, use "const"

    This fixes some compiler warnings:
    tools/default_image.c:141: warning: initialization from incompatible pointer type
    tools/fit_image.c:202: warning: initialization from incompatible pointer type
    and changes to code to use "const" attributes in a few places where
    it's appropriate.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 89a4d6b12fd6394898b8a454cbabeaf1cd59bae5
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Wed Aug 19 17:36:46 2009 +0530

    tools: mkimage: split code into core, default and FIT image specific

    This is a first step towards reorganizing the mkimage code to make it
    easier to add support for additional images types. Current mkimage
    code is specific to generating uImage and FIT image files, but the
    same framework can be used to generate other image types like
    Kirkwood boot images (kwbimage-TBD). For this, the mkimage code gets
    reworked:

    Here is the brief plan for the same:-
    a) Split mkimage code into core and image specific support
    b) Implement callback functions for image specific code
    c) Move image type specific code to respective C files
           Currently there are two types of file generation/list
           supported (i.e uImage, FIT), the code is abstracted from
           mkimage.c/.h and put in default_image.c and fit_image.c;
           all code in these file is static except init function call
    d) mkimage_register API is added to add new image type support
    All above is addressed in this patch
    e) Add kwbimage type support to this new framework (TBD)
    This will be implemented in a following commit.

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
    Edit commit message, fix coding style and typos.
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 449609f5b11cce6beba7338bc4ce0f3345376a0b
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Sun Aug 16 05:28:19 2009 +0530

    tools: mkimage: Fixed build warnings

    uninitialized retval variable warning fixed
    crc32 APIs moved to crc.h (newly added) and build warnings fixed

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 14821d7dea8d7209f2457c3179fa6551c088ba71
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Aug 10 20:44:06 2009 +0530

    tools: mkimage: Makefile sorted

    The tools/Makefile is sorted for all entries,

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

commit f7644c0bf3502529031657a869fa213cda5a2424
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Aug 10 18:49:37 2009 +0530

    tools: mkimage : bugfix returns correct value for list command

    List command always return "EXIT_SUCCESS" even in case of
    failure by any means.

    This patch return 0 if list command is sucessful,
    returns negative value reported by check_header functions

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 511c02f611cb5afa1b8ca5980caaaabaa0de377f
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Tue Sep 8 15:07:12 2009 +0800

    mkconfig: pass the board name to board config file

    Then we can handle different config targets in the board file, which
    simplifies the top level Makefile for boards that have multiple
    config targets.

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>

commit d640ac58dbf61c769864b3fe76314306b7336cf1
Author: Wolfgang Denk <wd@denx.de>
Date:   Mon Sep 7 23:52:31 2009 +0200

    Remove "atmel_df_pow2" binary with "make clean"

    Commit 65f6f07b added support for the atmel_df_pow2 standalone program
    but missed to add a rule to remove it to the "clean" make target.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 0b34dbbd0b6969c98c44313b291836d9056ec40a
Author: Stefan Roese <sr@denx.de>
Date:   Mon Sep 7 10:52:24 2009 +0200

    ppc4xx: Fix compilation warning in 4xx miiphy.c

    This patch fixes the following compilation warning:

    miiphy.c: In function 'emac4xx_miiphy_read':
    miiphy.c:353: warning: dereferencing type-punned pointer will break
    strict-aliasing rules

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 82379b5564819e62624a3c58fbc43f1afedf4f5f
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:   Mon Sep 7 17:00:41 2009 +0200

    ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 99bcf14d553f399148a7660b98f7acbd8cc72d80
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:   Mon Sep 7 17:00:40 2009 +0200

    ppc4xx: Allow overwriting pci target registers for all 4xx boards

    This patch adds the CONFIG_PCI_4xx_PTM_OVERWRITE option and replaces
    the ugly 'if defined(BOARD1) || ... || defined(BOARDn)' construct
    in 4xx pci code.

    When CONFIG_PCI_4xx_PTM_OVERWRITE is defined the default ptm register
    setup can be overwritten through environment variables ptm1la, ptm1ms,
    ptm2la and ptm2ms to do application specific pci target BAR configuration.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit cfab2ae322a99ad55364d054054f138f51130c2a
Author: Matthias Fuchs <matthias.fuchs@esd.eu>
Date:   Fri Sep 4 10:37:04 2009 +0200

    ppc4xx: Fix PMC405DE support

    This patch fixes PMC405DE support. Patch 85d6bf0b fixed out-of-tree
    building for this board but the loadpci object did not get linked
    after that.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit c8355b9d9f778bd12ee19c8f34d88e13758a4efd
Author: Detlev Zundel <dzu@denx.de>
Date:   Wed Sep 2 17:24:57 2009 +0200

    amcc-common.h: Use filenames from environment variables for update procedure.

    Using a separate "u-boot" environment variable allows to easily
    specify different filenames for the update procedure.  This is also in
    line with many other board configurations defining an "update" script.

    Signed-off-by: Detlev Zundel <dzu@denx.de>
    Acked-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6c97a20d0b2f56cb4f3745d94b1f96986e8cced5
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Sep 9 11:40:41 2009 -0500

    ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address

    Some board ports place TEXT_BASE at a location that would cause the
    RESET_VECTOR_ADDRESS not to be at 0xfffffffc when we link.  By default
    we assume RESET_VECTOR_ADDRESS will be 0xfffffffc if the board doesn't
    explicitly set it.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Wolfgang Denk <wd@denx.de>

commit c348322ac7f76318295cf25ffab2cc2a4900a234
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Tue Sep 8 13:46:46 2009 -0500

    ppc/85xx: Clean up do_reset

    There is no reason to do a run time check for e500 v1 based cores to
    determine if we have the GUTs RSTCR facility.  Only the first generation
    of PQ3 parts (MPC8540/41/55/60) do not have it.  So checking to see if
    we are e500 v2 would miss future parts (like e500mc).

    Just change this to be ifdef'd based on CONFIG_MPC85{40,41,55,60}.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 21170c80a83f1e60ce7f6f83005e06a5c2d15a8e
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Thu Sep 3 19:42:40 2009 +0530

    ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu().

    While in probecpu() UART is still not initialized.

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit f8027f6b4789e3340f10620d8fb6113b95b88d9c
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Wed Sep 2 19:40:36 2009 +0530

    ppc/85xx/86xx: Device tree fixup for number of cores

    Fixing the number of cores in the device tree based on the actual number of
    cores on the system.  With this same device tree image can be used for dual
    core and single core members of otherwise exactly same SOC.

    For example:
    * P2020RDB and P2010RDB
    * P1020RDB and P1011RDB
    * MPC8641D and MPC8641

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 58442dc01e47cc8ce42af4f29486a34cad60b9d2
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Wed Sep 2 13:35:21 2009 +0530

    ppc/85xx,86xx: Handling Unknown SOC version

    Incase the system is detected with Unknown SVR, let the system boot
    with a default value and a proper message.

    Now with dynamic detection of SOC properties from SVR, this is necessary
    to prevent a crash.

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3e7b6c1f2db5ec31f9e7dbc3e0cbca602167a46a
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Sep 2 09:03:08 2009 -0500

    ppc/8xxx: Refactor code to determine if PCI is enabled & agent/host

    Refactor the code into a simple bitmask lookup table that determines if
    a given PCI controller is enabled and if its in host/root-complex or
    agent/end-point mode.

    Each processor in the PQ3/MPC86xx family specified different encodings
    for the cfg_host_agt[] and cfg_IO_ports[] boot strapping signals.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 5052a771cf1722c37c732f3c340775b55fbe3a22
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Sep 2 09:00:50 2009 -0500

    ppc/85xx: Cleanup makefile and related optional files

    Cleaned up cpu/mpc85xx/Makefile to use CONFIG_* for those obvious cases
    we have like PCI, CPM2, QE.  Also reworked it to use one line per file
    for everything and sorted in alphabetical order.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 74c5dfd81f94a2a1f0d6990d17c491d718e8b9ea
Author: Timur Tabi <timur@freescale.com>
Date:   Fri Sep 4 17:05:24 2009 -0500

    fsl: add register read-back to set_law()

    After programming a new LAW, we should read-back the LAWAR register so that
    we sync the writes.  Otherwise, code that attempts to use the new LAW-mapped
    memory might fail right away.

    Signed-off-by: Timur Tabi <timur@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit c7259086816405fe0eb77f4dc22e76980a040cef
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 3 08:41:31 2009 -0500

    ppc/85xx: Fix bug in setup_mp code

    Its possible that we try and copy the boot page code out of flash into a
    DDR location that doesn't have a TLB cover it.  For example, if we have
    3G of DDR we typically only map the first 2G.  In the cases of 4G+ this
    wasn't an issue since the reset page TLB mapping covered the last page
    of memory which we wanted to copy to.

    We now change the physical address of the reset page TLB to map to the
    true physical location of the boot page code, copy and than set the
    TLB back to its 1:1 mapping of the reset page.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit c2287af1552bd630956568d3957c370f86801b7d
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Sep 3 08:20:24 2009 -0500

    ppc/85xx: Add a simple function to search the TLB

    Allow us to search the TLB array based on an address.  This is useful
    if we want to change an entry but dont know where it happens to be
    located.

    For example, the boot page mapping we use on MP or the flash TLB that
    we change the WIMGE settings for after we've relocated.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 26f4cdba6b51deab4ec99d60be381244068ef950
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Fri Aug 14 13:37:54 2009 -0500

    85xx: Add support for setting IVORs to fixed offset defaults

    In future Book-E implementations IVORs will most likely go away and be
    replaced with fixed offsets.  The IVPR will continue to exist to allow
    for relocation of the interrupt vectors.

    This code adds support to setup the IVORs as their fixed offset values
    per the ISA 2.06 spec when we transition from u-boot to another OS
    either via 'bootm' or a cpu release.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit da1cd955dfec35b0e15381ad1ee248fa194eed82
Author: Dipen Dudhat <dipen.dudhat@freescale.com>
Date:   Wed Sep 2 11:25:08 2009 +0530

    ppc/85xx: Fix up eSDHC controller clock frequency in the device tree

    Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 2abbd31da6d900473ed678ca50789ee58bc9bb00
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Tue Sep 1 22:01:54 2009 -0500

    ppc/8xxx: Remove ddr_pd_cntl register since it doesn't exist

    The ddr_pd_cntl isn't defined in any reference manual and thus we wil
    remove especially since we set it to 0, which would most likely be its
    POR value.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 13d46ab2572c0283d34f93bebc9a41295ef84ca5
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Tue Sep 1 21:07:08 2009 -0500

    ppc/8xxx: relocate cpu pointer in global data

    Now that we have a pointer to the cpu struct we need to relocate it once
    we get into ram.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9c671e7062720074f894ee329eaa6995b0823727
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Wed Sep 2 02:17:24 2009 +0400

    fsl: sys_eeprom: Fix 'may be used uninitialized' warning

    The warning is bogus, so silence it by initializing the 'ret' variable.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
    Acked-by: Timur Tabi <timur@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 6b9ea08c5010eab5ad1056bc9bf033afb672d9cc
Author: Dipen Dudhat <dipen.dudhat@freescale.com>
Date:   Tue Sep 1 17:27:00 2009 +0530

    ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clk

    Enable eSDHC Clock based on generic CONFIG_FSL_ESDHC define instead of a
    platform define.  This will enable all the 85xx platforms to use sdhc_clk
    based on CONFIG_FSL_ESDHC.

    Signed-off-by: Gao Guanhua <B22826@freescale.com>
    Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 92477a631bbda2dc0dd2194e03f9bd3ddb8b9c21
Author: Timur Tabi <timur@freescale.com>
Date:   Fri Sep 4 16:28:35 2009 -0500

    fsl_i2c: increase I2C timeout values and make them configurable

    The value of I2C_TIMEOUT in fsl_i2c.c has several problems.  First, it is
    defined as CONFIG_HZ/4, but it is used as a count of microseconds, so it makes
    no sense to derive it from a clock rate.  Second, the current value (250) is
    too low for some boards, so it needs to be increased.  Third, the timeout
    necessary for multiple-master arbitration is larger than the timeout for basic
    read/write operations, so we shouldn't have a single constant for both timeouts.
    Finally, it would be nice if we could override these values on a per-board
    basis.

    Signed-off-by: Timur Tabi <timur@freescale.com>
    Acked-by: Wolfgang Denk <wd@denx.de>
    Tested-by: Peter Tyser <ptyser@xes-inc.com>
    Acked-by: Peter Tyser <ptyser@xes-inc.com>

commit 5da71efa18e8b4eac9afd8bfa13e3c7e7ddde1d0
Author: Eric Millbrandt <emillbrandt@coldhaus.com>
Date:   Thu Sep 3 08:09:44 2009 -0500

    Reset i2c slave devices during init on mpc5xxx cpus

    Reset any i2c devices that may have been interrupted during a system reset.
    Normally this would be accomplished by clocking the line until SCL and SDA
    are released and then sending a start condtiion (From an Atmel datasheet).
    There is no direct access to the i2c pins so instead create start commands
    through the i2c interface.  Send a start command then delay for the SDA Hold
    time, repeat this by disabling/enabling the bus a total of 9 times.

    Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>

commit 2d4072c06b5549444e4140231bba3d47d9b0bc53
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Sat Aug 15 11:20:58 2009 -0400

    ARM: DaVinci: Adding Support for DaVinci DM365 EVM

    This patch adds support for the DM365 EVM.
    It has been tested on a DM365 EVM.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit cf463091bce8b0f8951dd08f94754d08d64793b8
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Sat Aug 15 11:20:44 2009 -0400

    ARM: DaVinci: DaVinci DM365 SOC specific code

    This patch adds support for DaVinci DM365 SOC.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

commit e830b66b3592f115316600d370399f3ee148e909
Author: Ilko Iliev <iliev@ronetix.at>
Date:   Sat Sep 5 02:51:34 2009 +0200

    DM9000 init for pm9261

    Signed-off-by: Ilko Iliev <iliev@ronetix.at>

commit c35d7cf071f171bd6bba69f1563a6ac578a18ea6
Author: Frederik Kriewitz <frederik@kriewitz.eu>
Date:   Sun Aug 23 12:56:42 2009 +0200

    Add support for the DevKit8000 board

    This patch adds support for the DevKit8000 board.

    Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu>

commit 127f9ae575991aee3e105e1448c49b5b4e254998
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:   Sun Aug 23 16:32:40 2009 +0200

    omap3: move the other boards to board/

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 350f3ac5731faf0f02ca55ab016694b7c7269f97
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:   Sun Aug 23 16:32:39 2009 +0200

    arm: move Logicpd's boards to board/logicpd/

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 0a0e4bad9693ef1d2ca8c33ba551d395a4e3d641
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:   Sun Aug 23 16:32:38 2009 +0200

    omap: move TI's boards to board/ti/

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 9f23ca42b3ba19b24e66fade572f2b86d929b6e8
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Sep 4 23:20:29 2009 +0200

    ARM: Update mach-types

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 262ae0a6193f10b6a94e86d2f752e7f5510416fa
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Thu Sep 3 23:12:47 2009 -0400

    push LOAD_ADDR out to arch mk files

    Rather than maintain/extend the current ifeq($(ARCH)) mess that exists in
    the standalone Makefile, push the setting up of LOAD_ADDR out to the arch
    config.mk (and rename to STANDALONE_LOAD_ADDR in the process).  This keeps
    the common code clean and lets the arch do whatever crazy crap it wants in
    its own area.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 7662eb2b9d6fbc95ecb1fb3e5b5147215e251e7d
Author: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>
Date:   Thu Sep 3 07:37:46 2009 -0400

    zlib: fix code when DEBUG is defined

    Removed stdio.h inclusion and moved trace macros to use printf avoiding to
    write debug informations to standard error.

    Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>

commit cfcbf8c4cf3da96b9e3f652506b664bfd766a520
Author: Scott Wood <scottwood@freescale.com>
Date:   Wed Sep 2 16:45:31 2009 -0500

    mxc_nand: Remove Freescale's "All Rights Reserved."

    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 001d615681333569c555e6cde07d8d23e2c536fb
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Wed Sep 2 17:58:48 2009 +0400

    mpc83xx/serdes: License cleanup: remove "All Rights Reserved" notice

    "All Rights Reserved" conflicts with the GPL.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit 46ff6d461321f5b565cc790e02679237ffd9a20f
Author: Wolfgang Denk <wd@denx.de>
Date:   Wed Sep 2 14:57:27 2009 +0200

    License cleanup: remove unintended "All Rights Reserved" notices.

    Some files included my old standerd file header which had a "All
    Rights Reserved" part. As this has never been my intention, I remove
    these lines to make the files compatible with GPL v.2 and later.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 37daa77f3cafb5ec9a974eff3db2af4a0560a9ef
Author: Wolfgang Denk <wd@denx.de>
Date:   Wed Sep 2 10:21:20 2009 +0200

    cmd_mtdparts.c: fix compiler warning in debug code

    Fix warning messages:
    cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long
    unsigned int', but argument 6 has type 'u32'
    cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long
    unsigned int', but argument 7 has type 'u32'

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit d8bc55a6fb28876abcbf4a3fc3b6c3ce429c1bb3
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Tue Sep 1 20:58:03 2009 +0400

    Move uninitialized_var() macro from ubi_uboot.h to compiler.h

    This is needed so that we could use this macro for non-UBI code.

    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

commit d72871e1387094972569e4b77c25e88020f7b68f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Tue Sep 1 11:24:45 2009 -0500

    arm: Remove -fno-strict-aliasing

    -fno-strict-aliasing is hidding warnings.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit d6281ff0cc2ebb5d6a5c3e1021837334074f92ec
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Tue Sep 1 11:24:44 2009 -0500

    ppc: Remove -fno-strict-aliasing

    -fno-strict-aliasing is hidding warnings.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 795d246c278e70b4ba9868cc9f2c8fbada49d388
Author: Eric Millbrandt <emillbrandt@coldhaus.com>
Date:   Fri Aug 28 07:14:04 2009 -0500

    galaxy5200: Add chip select region for an Epson S1D15313

    Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>

commit 3dfad40a0459f63099e177dc15a1df39d048f860
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Aug 27 08:23:55 2009 -0500

    Add ability for arch code to make changes before we boot

    Added a arch_preboot_os() function that cpu specific code can implement to
    allow for various modifications to the state of the machine right before
    we boot.  This can be useful to setup register state to a specific
    configuration.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 9ea005fb4428c922536fa75991ce9972304a02fb
Author: Roy Zang <tie-fei.zang@freescale.com>
Date:   Sat Aug 22 03:49:52 2009 +0800

    Use different PBA value for E1000 PCI and PCIe cards

    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
    Acked-by: André Schwarz <andre.schwarz@matrix-vision.de>

commit 5b34a296d47b236dafbcaf1c91ae11b5aeb1ef51
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:58 2009 +1000

    Add PCI support to eNET board

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit f50b619d9cb297b0125fe78dcd6f255eb0d91659
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:57 2009 +1000

    i386: Moved PCI from #ifdef to conditional compile for sc520 boards

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit ed7a1b681de1e31d18d5b92e2767ae8df3241687
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:56 2009 +1000

    i386: Replace [read, write]_mmcr_[byte, word, long] with memory mapped structure

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 9b32f96b5b92ba13fdb4b5eb637734752235f260
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:55 2009 +1000

    Misc sc520 cdp fixups

    Now that the PCI, SATA et al compile problems have been resolved, the
    cludge that was applied to avoid them can be removed

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 91ee4e183cb7ac5f86e7673ead51400f19906635
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:54 2009 +1000

    Fixup sc520_spunk board

    Primary intent is to resolve build errors for this board which has been
    neglected for a very long time. I do not have one of these boards, so I
    cannot test functionality

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 8907b8dbc5805094f1316d64737d3428b3863693
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:53 2009 +1000

    Misc ds1722 fixups

    This patch is based on a patch submitted by Jean-Christophe PLAGNIOL-VILLARD
    on 18th May 2008 as part of a general i386 / sc520 fixup which was never
    applied

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit a92510e7fae523145b58765cdc46110f1162260d
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:52 2009 +1000

    Misc ti_pci1410a fixups

    Removed do_pinit() - now declared in cmd_pcmcia.c

    Added #define CONFIG_CMD_PCMCIA around pcmcia_off() in line with other
    PCMCIA drivers

    signed/unsigned type fixups

    Added semi-colon after default: label as required by newer gcc

    The only board that appears to use this driver is the sc520_spunk which
    is very old and very likely very broken anyway. I do not have one to test
    whether this patch breaks anything functionaly, I have can only check
    that it compiles without warning or error

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 31b9ab33d93d88ff89f3046aa45c68667a378a56
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:51 2009 +1000

    Misc SATA fixups

    Cast first parameter to sata_cpy()

    In /drivers/block/ata_piix.h, ata_id_has_lba48(), ata_id_has_lba(),
    ata_id_has_dma(), ata_id_u32(), ata_id_u64() are all defined in
    include/libata.h which is included in ata.h which is included by all files
    which include ata_piix.h (only ata_piix.c) so these definitions are
    supurflous to (and conlict with) this in libata.h. Interestingly, my
    compiler complains about ata_id_u64 already being defined, but not
    ata_id_u32

    ata_dump_id() is defined in include/libata.h and should not be static
    (maybe should even use ata_dump_id() in libata.c

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit d7549024098af093785151261266a02be19af633
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:50 2009 +1000

    i386: Misc PCI fixups

    Change PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY (Originally done in
    commit ff4e66e93c1a, regressed by commit 6d7f610b09f8)

    Cast PCI_ROM_ADDRESS_MASK to u32

    Wrap probe_pci_video() call inside #ifdef CONFIG_VIDEO

    Change call to pci_find_class() to pci_find_devices(). This is based on a
    patch submitted on 1st March 2007 (Patch that fixes the compilation errors
    for sc520_cdp board) by mushtaq_k

    This patch requires that PCI_VIDEO_VENDOR_ID and PCI_VIDEO_DEVICE_ID be
    specified in the board config file.  Dummy values have been added for the
    SC520 CDP board to enable compilation, but since I do not have one of these,
    I do know what the values should be

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit 04ff9ab158714d43cdf2f4f6f0235c3ea9d241a2
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:49 2009 +1000

    Fix sc520 timer interrupt generation

    The current implementation has the timer being started before the interrupt
    handler is installed. It the interrupt occurs before the handler is
    installed, the timer interrupt is never reset and the timer stops

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit f3a8d6b29b1cd01fdd940e8ff7a62b1df0ebbf82
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:48 2009 +1000

    Fix environment configuration for eNET board

    The current configuration of the Environment has the redundant copy of the
    environment in the Boot Flash - This was never the intent. The Environment
    should instead be in the first two sectors of the first Strata Flash

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit ea0c37798c3823fdd77edfffd27b20191f8ca1f0
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:47 2009 +1000

    i386: Fix regression introduced by commit 8c63d47651f7

    A local variable was deleted that should not have been

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit cfb3a736ffcff3e3753b902cad536f22fcf8961d
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:46 2009 +1000

    i386: Change inline asm global symbols to local

    gcc 4.3.2 optimiser creates multiple copies of inline asm (who knows why)
    Remove use of global names for labels to prevent 'symbol already defined'
    errors

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit a3ab8caee696a1d53fc82fa321e2b2f179970168
Author: Graeme Russ <graeme.russ@gmail.com>
Date:   Sun Aug 23 12:59:45 2009 +1000

    i386: Add errno.h

    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

commit d4e8ada0f6d51e0e3b80790fb9375ac8910f5352
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Fri Aug 21 23:05:21 2009 -0500

    Consolidate arch-specific mem_malloc_init() implementations

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit a483a167bc8d808145ca1224a2c238cda90aa60c
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Fri Aug 21 23:05:20 2009 -0500

    Standardize mem_malloc_init() implementation

    This lays the groundwork to allow architectures to share a common
    mem_malloc_init().

    Note that the x86 implementation was not modified as it did not fit the
    mold of all other architectures.

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 5e93bd1c9aaea886c5e5c7c1b6114ab36c30668f
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Fri Aug 21 23:05:19 2009 -0500

    Consolidate arch-specific sbrk() implementations

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

commit 65f6f07b72a71b83d775c4d20d7ebcd6b2d2086d
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Thu Jul 23 16:37:03 2009 -0400

    atmel_df_pow2: standalone to convert dataflashes to pow2

    Atmel DataFlashes by default operate with pages that are slightly bigger
    than normal binary sizes (i.e. many are 1056 byte pages rather than 1024
    bytes).  However, they also have a "power of 2" mode where the pages show
    up with the normal binary size.  The latter mode is required in order to
    boot with a Blackfin processor, so many people wish to convert their
    DataFlashes on their development systems to this mode.  This standalone
    application does just that.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit cb95c7a935ab9b52dac5d08e5ba4007c5a480f97
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Sep 2 05:52:37 2009 -0400

    Blackfin: cm-bf548: fix device->stdio_dev fallout

    The recent 52cb4d4fb348 commit which renamed device to stdio_dev missed the
    cm-bf548's video board.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit c7bcdde46a7ef78628f0f09fdc6cb61bb1bd7e79
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Sep 2 04:21:16 2009 -0400

    Blackfin: enable 64bit printf for nand

    Since the NAND code now uses 64bit code, make sure we enable support for
    ADI Blackfin boards in printf to avoid the warning:
    nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output!

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 9c46e71af2b03ccd721c56b1dc906ead702d6fb5
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Mon Aug 24 20:48:04 2009 -0400

    Blackfin: use scratch pad for exception stack

    If the memory layout pushes the stack out of the default DCPLB coverage,
    the exception handler may trigger a double fault by trying to push onto
    the uncovered stack.  So handle the exception stack similar to the kernel
    by using the top of the scratch pad SRAM.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 69a25ce3578f34c8accb476f70089f3a44b78ed9
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Mon Aug 24 20:36:25 2009 -0400

    Blackfin: increase default console size

    The default console size indirectly applies to length of env vars, so a
    smaller length makes it hard to pass longer command lines to kernels.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit f541e1d6d99c22bbd4bc8c84fdb02baad0277847
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Mon Aug 24 19:03:18 2009 -0400

    Blackfin: fix debug printf modifiers

    The display_global_data() function generated warnings with pretty much
    every variable.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 4640c2b8699bcdd2346a2c633486f07f061a2939
Author: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Date:   Thu Aug 20 19:20:41 2009 -0400

    Blackfin: cm-bf537u: new board port

    The CM-BF537U is similar to the CM-BF537E module, but enough to need its
    own board port.

    Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit c4db335c2e0805e1ce4c33d278b77492c0812353
Author: Robin Getz <robin.getz@analog.com>
Date:   Mon Aug 17 15:23:02 2009 +0000

    Blackfin: change global data register from P5 to P3

    Since the Blackfin ABI favors higher scratch registers by default, use the
    last scratch register (P3) for global data rather than the first (P5).
    This allows the compiler's register allocator to use higher number scratch
    P registers, which in turn better matches the Blackfin instruction set,
    which reduces the size of U-Boot by more than 1024 bytes...

    Signed-off-by: Robin Getz <robin.getz@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 574b70df03fba0ea635e2fe71fbd7b97d19b706a
Author: Robin Getz <robin.getz@analog.com>
Date:   Tue Aug 11 14:20:13 2009 +0000

    Blackfin: enable more network commands for ADI dev boards

    Add dns and ntp to default networking commands, and ask for more dhcp
    options to better configure the network environment.

    Signed-off-by: Robin Getz <robin.getz@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit aa7b248a05323d4720969227603e39a22777ed95
Author: Michael Hennerich <michael.hennerich@analog.com>
Date:   Thu Jun 18 09:12:50 2009 +0000

    Blackfin: bf537-stamp: comment CF-Flash Card Support better

    Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 69c6d268a29cf6d61e096d815abf5abf24136f45
Author: Robin Getz <robin.getz@analog.com>
Date:   Fri Jul 10 18:37:15 2009 +0000

    Blackfin: use +(filesize) to make sure we are only doing what is necessary

    Signed-off-by: Robin Getz <robin.getz@analog.com>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 2dc851e3b0f07a56f83060f13882ff4b62cf5112
Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Date:   Thu Aug 20 16:04:49 2009 +0200

    Support for the Calao TNY-A9260/TNY-A9G20 boards

    The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by
    Calao Systems <http://www.calao-systems.com>. Their components are very
    similar to the AT91SAM9260EK board, so their configuration is based on
    the configuration of this board. There are however some differences:
    different clocks, no LCD, no ethernet. They also can use SPI EEPROM to
    store the environment.

    Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 49d2cb4d6153a6c18249dccb5de5cffeb261a61c
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Thu Aug 20 20:59:28 2009 +0530

    arm: Kirkwood: add SYSRSTn Duration Counter Support

    This feature can be used to trigger special command "sysrstcmd" using
    reset key long press event and environment variable "sysrstdelay" is set
    (useful for reset to factory or manufacturing mode execution)

    Kirkwood SoC implements a hardware-based SYSRSTn duration counter.
    When SYSRSTn is asserted low, a SYSRSTn duration counter is running.
    The counter value is stored in the SYSRSTn Length Counter Register
    The counter is based on the 25-MHz reference clock (40ns)
    It is a 29-bit counter, yielding a maximum counting duration of
    2^29/25 MHz (21.4 seconds). When the counter reach its maximum value,
    it remains at this value until counter reset is triggered by setting
    bit 31 of KW_REG_SYSRST_CNT

    Implementation:
    Upon long reset assertion (> ${sysrstdelay} in secs) sysrstcmd will be
    executed if pre-defined in environment variables.
    This feature will be disabled if "sysrstdelay" variable is unset.

    for-ex.
    setenv sysrst_cmd "echo starting factory reset;
                   nand erase 0xa0000 0x20000;
                   echo finish ed sysrst command;"
    will erase particular nand sector if triggered by this event

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

commit 9453967e28c5e3abbf856f95735ea69bae1e77fa
Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Date:   Mon Aug 24 18:03:26 2009 +0200

    Add support for the Calao SBC35-A9G20 board

    The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems
    <http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC
    running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard
    battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND
    flash, two USB host ports, and an USB device port. More informations can be
    found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936>

    Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>

commit 10bc241dfc15a0820d9c52469173b7ccafec0b84
Author: Ilya Yanok <yanok@emcraft.com>
Date:   Tue Aug 11 02:32:09 2009 +0400

    imx27lite: add support for imx27lite board from LogicPD

    This patch adds support for i.MX27-LITEKIT development board from
    LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND
    flash, FEC ethernet controller integrated into i.MX27.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
    Acked-by: Wolfgang Denk <wd@denx.de>

commit 50b5fff55827946c86a60db8b21a9358be720666
Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Date:   Tue Sep 1 11:26:20 2009 +0200

    at91sam9260/afeb9260: Fix SPI initialization

    Commit 7ebafb7ec1a0285af8380623c009576f92583b98 introduced a mistake in the spi
    init function call for those boards. This patch fixes this.

    Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>

commit f3d4f8870e69e0fd177397778d97d0751bbd020a
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Tue Aug 18 11:13:44 2009 +0200

    Remove duplicate set_cr

    Remove duplicate set_cr

    set_cr is defined in both asm-arm/proc-armv/system.h and
    include/asm-arm/system.h. This patch removes it (and some duplicate
    defines) from the former.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>

commit 3d35d87d5482de23cd5dc4d7721b1086107cae50
Author: Wolfgang Denk <wd@denx.de>
Date:   Mon Aug 31 19:57:42 2009 +0200

    Prepare 2009.08

    Update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 632a6dd0b612eb7b143f789f2a0273917468c041
Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date:   Mon Aug 31 16:18:24 2009 +0200

    Add common code dir for Matrix Vision boards.

    This fixes current build failure.

    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

    mvblm7.c: fix warning: implicit declaration of function
    'mv_reset_environment'

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 52f6c34c85d6c16f2a41433b5000490ecf374992
Author: David Brownell <dbrownell@users.sourceforge.net>
Date:   Sun Aug 30 11:05:29 2009 -0700

    bugfix CONFIG_SYS_CONSOLE_INFO_QUIET

    The "console: unify printing current devices" patch goofed:
    CONFIG_SYS_CONSOLE_INFO_QUIET is supposed to *REMOVE* boot
    time noise, not add it.  Said patch changed the #ifndefs
    to #ifdef; this one restores them to the proper sense.

    Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

commit 2d04db088e6df8a008bb09f604876a45031df93b
Author: Timur Tabi <timur@freescale.com>
Date:   Fri Aug 28 16:56:45 2009 -0500

    fsl: simplify the "mac id" command, improve boot-time informational message

    The "mac id" command took a 4-character parameter as the identifier string.
    However, for any given board, only one kind of identifier is acceptable, so it
    makes no sense to ask the user to type it in.  Instead, if the user enters
    "mac id", the identifier (and also the version, if it's NXID) will
    automatically be set to the correct value.

    Improve the message that is displayed when EEPROM is read during boot.  It now
    displays "EEPROM:" and then either an error message or the EEPROM identifier
    if successful.

    If the identifier in EEPROM is valid, then always reject a bad CRC, even if the
    CRC field has not been initialized.

    Don't force the MAC address count to MAX_NUM_PORTS or less.  Forcing the value
    to be changed resulting in an in-memory copy that does not match what's in
    hardware, even though the user did not request that change.

    Finally, always update the CRC value in the in-memory copy after any field
    is changed, so that the CRC is always correct.

    Signed-off-by: Timur Tabi <timur@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 33f3f34255bd7cf0be502275c59f0ff22dc50080
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Fri Aug 21 07:29:58 2009 +0530

    85xx: Added PCIe support for P1 P2 RDB

    Call fsl_pci_init_port() to initialize all the PCIe ports on the board.

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0d3d68b25a8e7790f58530ddccbd61f9fc0245ef
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Fri Aug 21 07:29:42 2009 +0530

    driver/fsl_pci: Add fsl_pci_init_port function to initialize a PCI controller

    fsl_pci_init_port can be called from board specific PCI initialization
    routines to setup the PCI (or PCIe) controller.  This will reduce code
    redundancy in most of the 85xx/86xx FSL board ports that setup PCI.

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 05f6f66474312ad03c39b4ca4875af46c87366bf
Author: Timur Tabi <timur@freescale.com>
Date:   Thu Aug 20 17:41:11 2009 -0500

    85xx: Improve MPIC initialization

    The MPIC initialization code for Freescale e500 CPUs was not using I/O
    accessors, and it was not issuing a read-back to the MPIC after setting
    mixed mode.  This may be the cause of a spurious interrupt on some systems.

    Signed-off-by: Timur Tabi <timur@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit c17b79fbd0c7923948331d65cb588734a9c681ff
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Thu Aug 20 18:59:18 2009 +0530

    85xx: Added support for P1011RDB and P2010RDB

    P1011 and P2010 are single core variants of P1010 and P2020 respectively.
    The board(RDB) will be same.

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit a713ba926b45da9a6f923f1ac9e60a66852e5f2d
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Thu Aug 20 18:57:45 2009 +0530

    85xx: Added single core members of FSL P1xx/P2xx processors series

    P1011 - Single core variant of P1020
    P2010 - Single core variant of P2020

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit bf488bc0949fc900d1296a7f35a38a6a28cb5fab
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Thu Aug 20 18:57:02 2009 +0530

    85xx: P1020RDB Support Added

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 3b1f243b8dad30a646a0f056b0268519eadbc3c5
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Thu Aug 20 18:55:35 2009 +0530

    85xx: Added CONFIG_MAX_CPUS for P1020

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 76b474e2f5a223fcabfeaa4f1c8fb699062b986c
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Tue Aug 18 15:37:15 2009 +0800

    85xx: Add L2SRAM Register's macro definition

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 158c6724c99368a4d8eef11ee7e3c7ad0ef03a15
Author: Felix Radensky <felix@embedded-sol.com>
Date:   Sat Aug 15 15:08:37 2009 +0300

    85xx: Fix memory test range on MPC8536DS

    With current values of CONFIG_SYS_MEMTEST_START and CONFIG_SYS_MEMTEST_END
    memory test hangs if run without arguments. Set them to sane values, so
    that all available 512MB of RAM excluding exception vectors at the bottom
    and u-boot code and stack at the top can be tested.

    Signed-off-by: Felix Radensky <felix@embedded-sol.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ef41f2a25c554604156b59f5945feadae2f3cb55
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Aug 12 00:10:44 2009 -0500

    85xx: Removed BEDBUG support on P1_P2_RDB

    To match all other 85xx platforms we are removing BEDBUG support.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit b560ab85edfb68da653bf2527c390c3e182392a1
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Sat Aug 8 10:42:30 2009 -0500

    85xx: Init pci ethernet cards if we enable any on MPC8572DS

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 1bb61b69f7aba4931ede35fdcabd8e5ecad121d7
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Fri Aug 7 13:16:34 2009 -0500

    xes: Use proper IO access functions

    Also fix some minor whitespace oddities while we're cleaning up

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ec79d33b2c41ee8b6d1354cc0910217b769c5036
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Fri Aug 7 13:00:55 2009 -0500

    85xx: Move to a common linker script

    There are really no differences between all the 85xx linker scripts so
    we can just move to a single common one.  Board code is still able to
    override the common one if need be.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 87c7661b42aa7672539b54b51d3d5c4013ec6f6c
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Fri Jul 31 12:08:27 2009 +0530

    85xx: Added P1020 Processor Support.

    P1020 is another member of QorIQ series of processors which falls in ULE
    category. It is an e500 based dual core SOC.

    Being a scaled down version of P2020 it has following differences:
    - 533MHz - 800MHz core frequency.
    - 256Kbyte L2 cache
    - Ethernet controllers with classification capabilities.
    Also the SOC is pin compatible with P2020

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 728ece343e8bb2a66ee977c49d455439e3b28da9
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Wed Aug 5 13:29:24 2009 +0530

    85xx: Add support for P2020RDB board

    The code base adds P1 & P2 RDB platforms support.
    The folder and file names can cater to future SOCs of P1/P2 family.
    P1 & P2 processors are 85xx platforms, part of Freescale QorIQ series.

    Tested following on P2020RDB:
    1. eTSECs
    2. DDR, NAND, NOR, I2C.

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 0e870980a64584a591af775bb9c9fe9450124df9
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Fri Jul 31 12:08:14 2009 +0530

    8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx

    The number of CPUs are getting detected dynamically by checking the
    processor SVR value.  Also removed CONFIG_NUM_CPUS references from all
    the platforms with 85xx/86xx processors.

    This can help to use the same u-boot image across the platforms.

    Also revamped and corrected few Freescale Copyright messages.

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 18bacc2027f8531d8dec15ba8da3242dfb4e63f3
Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date:   Fri Jul 31 12:07:45 2009 +0530

    8xxx: Refactored common cpu specific code for 85xx/86xx into one file.

    Removed same code pieces from cpu/mpc85xx/cpu.c and cpu/mpc86xx/cpu.c
    and moved to cpu/mpc8xxx/cpu.c(new file)

    Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 7b18c227b847e4782eb1492219ebd555f521b08b
Author: Alex Dubov <oakad@yahoo.com>
Date:   Fri Aug 7 15:28:32 2009 +1000

    stx: create common vendor/board hierarchy for STx boards

    Move files belonging to the STx boards into common vendor directory and
    update the Makefile to reflect this.

    Signed-off-by: Alex Dubov <oakad@yahoo.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit bafdf9aa9dbb69d937b72db17ed5800998c59523
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Tue Aug 4 17:38:00 2009 -0500

    85xx: Remove unused CONFIG_CLEAR_LAW0 defines

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 73aacc522849486b60a5611f678f0bf1c3053779
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Aug 6 18:38:43 2009 -0500

    86xx: Remove redudant PLATFORM_CPPFLAGS

    For historic reasons we had defined some additional PLATFORM_CPPFLAGS like:

    PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
    PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1

    However these are all captured in the config.h and thus redudant.  Also
    moved common 86xx flags into cpu/mpc86xx/config.mk.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 53efa1f1acacacb76fa9a21b09b3294783a11c03
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Aug 6 18:28:34 2009 -0500

    85xx: Remove redudant PLATFORM_CPPFLAGS

    For historic reasons we had defined some additional PLATFORM_CPPFLAGS
    like:

    PLATFORM_CPPFLAGS += -DCONFIG_E500=1
    PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
    PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1

    However these are all captured in the config.h and thus redudant.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 337f9fde2e9317c1d9e85a4a8955a2f14730a00f
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Thu Jul 30 15:54:07 2009 -0500

    85xx: Add a 36-bit physical configuration for MPC8536DS

    We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
    to allow for larger memory sizes.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
    Acked-by: Wolfgang Denk <wd@denx.de>

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ecead84d56b0ced67b727f5ce21ba08c53b5f09e
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Tue Aug 4 09:10:03 2009 -0500

    85xx: Cleanup whitespace in mpc8536ds.c

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ad19e7a5d2de337064ce7728d6504df9648f5d31
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Aug 5 07:59:35 2009 -0500

    pci/fsl_pci_init: Rework PCI ATMU setup to handle >4G of memory

    The old PCI ATMU setup code would just mimic the PCI regions into the
    ATMU registers.  For simple memory maps in which all memory, MMIO, etc
    space fit into 4G this works ok.  However there are issues with we have
    >4G of memory as we know can't access all of memory and we need to
    ensure that PCICSRBAR (PEXCSRBAR on PCIe) isn't overlapping with
    anything since we can't turn it off.

    We first setup outbound windows based on what the board code setup
    in the pci regions for MMIO and IO access.  Next we place PCICSRBAR
    below the MMIO window.  After which we try to setup the inbound windows
    to map as much of memory as possible.

    On PCIe based controllers we are able to overmap the ATMU setup since
    RX & TX links are separate but report the proper amount of inbound
    address space to the region tracking to ensure there is no overlap.

    On PCI based controllers we use as many inbound windows as available to
    map as much of the memory as possible.

    Additionally we changed all the CCSR register access to use proper IO
    accessor functions.  Also had to add CONFIG_SYS_CCSRBAR_PHYS to some
    86xx platforms that didn't have it defined.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 8295b94400449586505ffe34ec024feb3d2c8fe4
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Wed Aug 5 07:49:27 2009 -0500

    pci/fsl_pci_init: Use PCIe capability to determine if controller is PCIe

    Change the code to use the PCIe capabilities register to determine if we
    are a PCIe controller or not.  Additionally cleaned up some white space
    and formatting in the file.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit cb151aa2cf5fbb1e412fc763a3a611758f066238
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Mon Aug 3 21:02:02 2009 -0500

    pci/fsl_pci_init: Fold fsl_pci_setup_inbound_windows into fsl_pci_init

    Every platform that calls fsl_pci_init calls fsl_pci_setup_inbound_windows
    before it calls fsl_pci_init.  There isn't any reason to just call it
    from fsl_pci_init and simplify things a bit.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit fb3143b35eb5890ec72e79d17a6068a84a057d47
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Mon Aug 3 20:44:55 2009 -0500

    pci/fsl_pci_init: Fold pci_setup_indirect into fsl_pci_init

    Every platform that calls fsl_pci_init calls pci_setup_indirect before
    it calls fsl_pci_init.  There isn't any reason to just call it from
    fsl_pci_init and simplify things a bit.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 28887d831b02c66ccc10d7f1379204b5a62f4543
Author: André Schwarz <andre.schwarz@matrix-vision.de>
Date:   Thu Aug 27 14:48:35 2009 +0200

    Use common code for Matrix Vision boards

    Clean up existing boards (mvBC-P/MPC5200 and mvBL-M7/MPC8343) by
    using common code.

    Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>

commit 05f91a65abc3180e2896cd8ddee7a34b1d1ce6e0
Author: Kim Phillips <kim.phillips@freescale.com>
Date:   Wed Aug 26 21:27:37 2009 -0500

    mpc83xx: mpc8349itx - accommodate larger kernel sizes & unzero the bootdelay

    apparently the ITX was missed last round.

    Also make bootdelay consistent with other boards, so as to give on the
    opportunity to fix mistakenly set bootcmd without having checked for an
    bootdelay zero setting first.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit cc861f7127f200e704baaf061a7f508e3c93f2a3
Author: Kim Phillips <kim.phillips@freescale.com>
Date:   Wed Aug 26 21:25:46 2009 -0500

    mpc83xx: match dtb filename references to their dts equivalents in the linux kernel

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 77b351cd0f20483eefa09bebebb3e0cbf5555b2c
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Tue Aug 18 10:10:42 2009 -0400

    NAND: DaVinci: V2 Adding 4 BIT ECC support

    This patch adds 4 BIT ECC support in the DaVinci NAND
    driver. Tested on both the DM355 and DM365.

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit f83b7f9e8a5d1334e24506ea5953dd871596ea8a
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Mon Aug 10 13:27:56 2009 -0400

    MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST

    This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to
    support 4-bit ECC on TI DaVinci devices with large page (up to 2K) NAND
    chips.  This ECC mode is similar to NAND_ECC_HW, with the exception of
    read_page API that first reads the OOB area, reads the data in chunks,
    feeds the ECC from OOB area to the ECC hw engine and perform any
    correction on the data as per the ECC status reported by the engine.

    This patch has been accepted by Andrew Morton and can be found at

    http://userweb.kernel.org/~akpm/mmotm/broken-out/mtd-nand-add-new-ecc-mode-ecc_hw_oob_first.patch

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
    Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 36fab997d85d89ee7fd2c7fd6057fab786d556aa
Author: Ilya Yanok <yanok@emcraft.com>
Date:   Tue Aug 11 02:32:54 2009 +0400

    mxc_nand: add nand driver for MX2/MX3

    Driver for NFC NAND controller found on Freescale's MX2 and MX3
    processors. Ported from Linux. Tested only with i.MX27 but should
    works with other MX2 and MX3 processors too.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit a2c65b47effcb3d0aa23e58596538acd338ac7c5
Author: Sandeep Paulraj <s-paulraj@ti.com>
Date:   Mon Aug 10 13:27:46 2009 -0400

    NAND: ADD page Parameter to all read_page/read_page_raw API's

    This patch adds a new "page" parameter to all NAND read_page/read_page_raw
    APIs.  The read_page API for the new mode ECC_HW_OOB_FIRST requires the
    page information to send the READOOB command and read the OOB area before
    the data area.

    This patch has been accepted by Andrew Morton and can be found at
    http://userweb.kernel.org/~akpm/mmotm/broken-out/mtd-nand-add-page-parameter-to-all-read_page-read_page_raw-apis.patch

    WE would like this to become part of the u-boot GIT as well

    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
    Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit de4250929f37e6c16860741b74546bedbe0bdaba
Author: Heiko Schocher <hs@denx.de>
Date:   Tue Jul 21 17:13:40 2009 +0200

    83xx, kmeter1: added NAND support

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit ecad289fc6bd9d89ef4d5093cc7b6fd712fd0d29
Author: Kyungmin Park <kmpark@infradead.org>
Date:   Tue Jul 21 11:58:04 2009 +0900

    OneNAND: Remove unused read_spareram

    Remove unused read_spareram and add unlock_all as kernel does

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 403ce1f759b5acec8514cd7e10ce76704fed519c
Author: Matthias Kaehlcke <matthias@kaehlcke.net>
Date:   Thu Jul 16 21:19:29 2009 +0200

    KB9202: Add NAND support

    Add KB9202 NAND driver

    Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit ce3277a6f2c082f39596d3d3d88dd0a5bc91439d
Author: Kyungmin Park <kmpark@infradead.org>
Date:   Tue Jul 21 11:58:04 2009 +0900

    OneNAND: Remove unused read_spareram

    Remove unused read_spareram and add unlock_all as kernel does

    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

commit 0d042037b3cf8693ea0f793d0c292430bfc5a95c
Author: Eric Millbrandt <emillbrandt@coldhaus.com>
Date:   Tue Aug 25 10:30:26 2009 -0500

    galaxy5200: Cleanup typo and trailing whitespace

    Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>

commit f6a309080b2da9e509b5ee8d091dca5e175415b7
Author: TsiChung Liew <tsicliew@gmail.com>
Date:   Wed Jul 22 18:42:45 2009 +0000

    ColdFire: Fix compile warning messages

    Change %08lX to %08X in board.c. Remove unused variable
    'oscillator' in mcf5227x/cpu_init.c and 'scm2' in
    mcf532x/cpu_init.c. Provide argument type cast in
    drivers/dma/MCD_dmaApi.c.

    Signed-off-by: TsiChung Liew <tsicliew@gmail.com>

commit 88c811b153771a3d1bfe958297c69722efb278e9
Author: TsiChung Liew <tsicliew@gmail.com>
Date:   Wed Jul 22 16:32:39 2009 +0000

    ColdFire: Fix missing _IO_BASE which caused compile error

    The compile error was caused by a recent patch. Affected platforms -
    M5253DEMO.h, M5253EVBE.h, and M54455EVB.h. Adding the _IO_BASE
    automatically defined to 0 in asm-m68k/io.h if it isn't set in
    platform configuration file.

    Signed-off-by: TsiChung Liew <tsicliew@gmail.com>

commit 3a7b2c21fb08b022e3e624cd071002b4aaed1606
Author: Niklaus Giger <niklaus.giger@member.fsf.org>
Date:   Wed Jul 22 17:13:24 2009 +0200

    Support up to 7 banks for ids as specified in JEDEC JEP106Z

    see http://www.jedec.org/download/search/jep106Z.pdf
    Add some second source legacy flash chips 256x8.

    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0d071cdd782e917b43e04869843df31670231ffd
Author: Kim Phillips <kim.phillips@freescale.com>
Date:   Mon Aug 24 14:32:26 2009 -0500

    net: tsec - handle user interrupt while waiting for PHY auto negotiation to complete

    if you don't have firmware installed for the PHY to come to life, this
    wait can be painful - let's give the option to avoid it if we want.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
    Acked-by: Andy Fleming <afleming@freescale.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 4fccb818e7ee1190602e79aa5729a23bc349bf0c
Author: Robin Getz <rgetz@blackfin.uclinux.org>
Date:   Thu Aug 20 10:50:20 2009 -0400

    Add Transfer Size Option to tftp

    Optionally add RFC 2349 "Transfer Size Option", so we can minimize the
    time spent sending data over the UART (now print a single line during a
    tftp transfer).

     - If turned on (CONFIG_TFTP_TSIZE), U-Boot asks for the size of the file.
     - if receives the file size, a single line (50 chars) are printed.
         one hash mark == 2% of the file downloaded.
     - if it doesn't receive the file size (the server doesn't support RFC
         2349, prints standard hash marks (one mark for each UDP frame).

    Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 488feef85229c08cd3aa1fa183bc8f483d2ae832
Author: Robin Getz <rgetz@blackfin.uclinux.org>
Date:   Mon Aug 24 10:33:39 2009 -0400

    Add debug message for Blackfin Ethernet Rx function.

    Add a simple print for the Blackfin's Ethernet Rx function,
    so we can debug incomming Ethernet functions easier.

    Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit b1c0eaac110bc919e5b4e88821348e714493f266
Author: Ben Warren <biggerbadderben@gmail.com>
Date:   Tue Aug 25 13:09:37 2009 -0700

    Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API

    All in-tree boards that use this controller have CONFIG_NET_MULTI added
    Also:
      - changed CONFIG_DRIVER_CS8900 to CONFIG_CS8900
      - changed CS8900_BASE to CONFIG_CS8900_BASE
      - changed CS8900_BUS?? to CONFIG_CS8900_BUS??
      - cleaned up line lengths
      - modified VCMA9 command function that accesses the device
      - removed MAC address initialization from lib_arm/board.c

    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
    Tested-by: Wolfgang Denk <wd@denx.de>
    Acked-by: Wolfgang Denk <wd@denx.de>

commit d47628a6ecf80cd4584a50b6c795b90c985a48e5
Author: Alessandro Rubini <rubini-list@gnudd.com>
Date:   Fri Aug 7 13:59:26 2009 +0200

    arm nomadik: activate defrag choose 4k transfer block size

    This chooses 4kB data size for both TFTP and NFS, as an example
    about how to use support for IP fragments.

    Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit bd931ca61c84039241d438ade4a9755ae0e5372f
Author: Alessandro Rubini <rubini-list@gnudd.com>
Date:   Fri Aug 7 13:59:16 2009 +0200

    nfs: accept CONFIG_NFS_READ_SIZE from config file

    To take advantage of defragmented packets, the config file
    can define CONFIG_NFS_READ_SIZE to override the 1kB default.
    No support is there for an environment variable by now.

    Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 89ba81d1079a07b8430a98c1746c6d411312eb0d
Author: Alessandro Rubini <rubini-list@gnudd.com>
Date:   Fri Aug 7 13:59:06 2009 +0200

    tftp: get the tftp block size from config file and from the environment

    Increasing the block size is useful if CONFIG_IP_DEFRAG is
    used. Howerver, the last fragments in a burst may overflow the
    receiving ethernet, so the default is left at 1468, with thre new
    CONFIG_TFTP_BLOCKSIZE for config files. Further, "tftpblocksize"
    can be set in the environment.

    Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 5cfaa4e54d0eb8232fa1cf092d955fdaed5b673d
Author: Alessandro Rubini <rubini-list@gnudd.com>
Date:   Fri Aug 7 13:58:56 2009 +0200

    net: defragment IP packets

    The defragmenting code is enabled by CONFIG_IP_DEFRAG; the code is
    useful for TFTP and NFS transfers.  The user can specify the maximum
    defragmented payload as CONFIG_NET_MAXDEFRAG (default 16k).
    Since NFS has a bigger per-packet overhead than TFTP, the static
    reassembly buffer can hold CONFIG_NET_MAXDEFRAG + the NFS overhead.

    The packet buffer is used as an array of "hole" structures, acting as
    a double-linked list. Each new fragment can split a hole in two,
    reduce a hole or fill a hole. No support is there for a fragment
    overlapping two diffrent holes (i.e., thre new fragment is across an
    already-received fragment).

    Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 68e74567cf317318df52dbcb2ac170ffc5e7758a
Author: Feng Kan <fkan@amcc.com>
Date:   Fri Aug 21 10:59:42 2009 -0700

    ppc4xx: Fix ECC Correction bug with SMC ordering for NDFC driver

    Fix ECC Correction bug where the byte offset location were double
    flipped causing correction routine to toggle the wrong byte location
    in the ECC segment. The ndfc_calculate_ecc routine change the order
    of getting the ECC code.
            /* The NDFC uses Smart Media (SMC) bytes order */
            ecc_code[0] = p[2];
            ecc_code[1] = p[1];
            ecc_code[2] = p[3];
    But in the Correction algorithm when calculating the byte offset
    location, the s1 is used as the upper part of the address. Which
    again reverse the order making the final byte offset address
    location incorrect.
        byteoffs = (s1 << 0) & 0x80;
        .
        .
        byteoffs |= (s0 >> 4) & 0x08;
    The order is change to read it in straight and let the correction
    function to revert it to SMC order.

    Signed-off-by: Feng Kan <fkan@amcc.com>
    Acked-by: Victor Gallardo <vgallardo@amcc.com>
    Acked-by: Prodyut Hazarika <phazarika@amcc.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 307ecb6db04eebdc06b8c87d48bf48d3cbd5e9d7
Author: Eric Millbrandt <emillbrandt@coldhaus.com>
Date:   Thu Aug 13 08:32:37 2009 -0500

    Add support for USB on PSC3 for the mpc5200

    Support USB on PSC3 on the mpc5200.  Before this patch, enabling USB support
    would reconfigure PSC4 and PSC5 to USB.  The mpc5200 does not support USB
    enabled on both the standard USB port and PSC3.  This patch masks the
    appropriate bits when enabling USB.

    Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
    Acked-by: Grant Likely <grant.likely@secretlab.ca>
    Acked-by: Remy Bohmer <linux@bohmer.net>

commit 6b8548b0f7068379ad1efa4fa28725f361b2d3cd
Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Date:   Thu Aug 13 19:12:44 2009 +0200

    Add driver for the ST M41T94 SPI RTC

    This RTC is used in some Calao boards. The driver code is taken from
    the linux rtc-m41t94 driver

    Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>

commit 885fc78c28fbe773bcb4edc9dd0fdac05ebb5b38
Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Date:   Thu Aug 13 15:31:12 2009 +0200

    Switch from per-driver to common definition of bin2bcd and bcd2bin

    Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
    Acked-by: Stefan Roese <sr@denx.de>

commit e84aba135ed7145299304ef550e92f08b2c99d7a
Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Date:   Thu Aug 13 15:31:11 2009 +0200

    Replace BCD2BIN and BIN2BCD macros with inline functions

    In the process, also remove backward-compatiblity macros BIN_TO_BCD and
    BCD_TO_BIN and update the sole board using them to use the new bin2bcd
    and bcd2bin instead

    Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
    Acked-by: Stefan Roese <sr@denx.de>
    Acked-by: Detlev Zundel <dzu@denx.de>

commit 5b53b29bc2e82b80b669f1d2402068c60d7fecd0
Author: Eric Millbrandt <emillbrandt@coldhaus.com>
Date:   Thu Aug 13 10:14:21 2009 -0500

    Add support for the galaxy5200

    Add support for the DEKA Research and Development galaxy5200 board

    The galaxy5200 is an Freescale mpc5200 based embedded industrial
    control board.

    Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>

commit 0a9e4e772123fe3e2bb499d7d2160c4cfd8a3a8d
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Fri Jul 24 16:34:32 2009 -0400

    unify {CONFIG_,}ENV_IS_EMBEDDED

    Some boards have fallen out of sync by defining CONFIG_ENV_IS_EMBEDDED
    manually.  While it is useful to have this available to the build system,
    let's do it automatically rather than forcing people to opt into it.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
    Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 02c9aa1d41f73fdcf8383a36cc0cbbfaf952855d
Author: Robin Getz <rgetz@blackfin.uclinux.org>
Date:   Mon Jul 27 00:07:59 2009 -0400

    Add md5sum and sha1 commands...

    Now that we have sha1 and md5 in lib_generic, allow people to use
    them on the command line, for checking downloaded files.

    Signed-off-by: Robin Getz <rgetz@analog.com>

commit 30fc5cd3116cb112d0aab7e6d7c8eef1b67ed075
Author: Wolfgang Denk <wd@denx.de>
Date:   Tue Aug 25 12:22:38 2009 +0200

    include/s3c24x0.h: fix S3C24X0_SPI_CHANNEL declaration

    The SPI controller on the S3C24X0 has 8 bit registers, not 32 bit.

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit e637385e69f63bc73b9dfd2ddd8d0f383790ca28
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Thu Aug 20 19:17:59 2009 -0400

    Blackfin: fix typos in gpio comments

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit c2fbcb6ae86c10621a386c13be57eaa766221ed5
Author: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Date:   Tue Aug 18 04:49:57 2009 -0400

    Blackfin: cm-bf527/cm-bf537: increase flash sectors

    Newer revisions of these boards have slightly larger flashes, so increase
    the configured number of sectors so that U-Boot works on all revisions.

    Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit a794f59a75bf9fd4a44f1ad2349cae903c42b89c
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:   Sun Aug 23 14:14:52 2009 +0200

    sh/rsk7203: add missing include net.h

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 6ac9f47977a9fc1876979871eeb14f26ba1bdbe6
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Sun Aug 23 02:47:59 2009 -0400

    start a linker script helper file

    Start a common header file for common linker script code (such as
    workarounds for older linkers) rather than doing this in the build system.

    As fallout, we no longer execute the linker every time config.mk is
    included by a build file (which can easily be 70+ times), but rather only
    execute it once.

    This also fixes a bug in the major version checking by creating a macro to
    easily compare versions and keep people from making the same common
    mistake (forgetting to check major and minor together).

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 2ed0869d30602eb660569eababb8fedff36bd23a
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Sat Aug 22 19:50:22 2009 -0400

    Blackfin: use common code to preprocess linker script

    Now that the common code preprocesses the linker script, the Blackfin code
    no longer needs to do it.

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 4d3758c835c7e96da2a291e7fb5acfc19bc06e8e
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Sat Aug 22 19:48:56 2009 -0400

    .gitignore: ignore generated u-boot.lds

    Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit 79b91de958511840d2a7491be92d435b7ef43f17
Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Date:   Sat Aug 22 14:21:53 2009 +0200

    include/mmc.h: Fix typo in IS_SD() macro

    Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>

commit 963f2f611741f8d9c38bd7caf20ae8c95cab7b3f
Author: Wolfgang Denk <wd@denx.de>
Date:   Sat Aug 22 23:27:26 2009 +0200

    Prepare 2009.08-rc3

    Update CHANGELOG, minor Coding Style cleanup.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 5b2da6a309266f21cbb68f06fcfdf9ba141022e7
Author: Michal Simek <monstr@monstr.eu>
Date:   Fri Aug 21 06:52:25 2009 +1000

    qemu-mips: Fix Qemu website

    Signed-off-by: Michal Simek <monstr@monstr.eu>
    Signed-off-by: Michal Simek <michal.simek@petalogix.com>
    Acked-by: Shinya Kuribayashi <skuribay@pobox.com>

commit 79f516bccc3cff5a5cd4b3dffb7d254e746fdbde
Author: Kim Phillips <kim.phillips@freescale.com>
Date:   Fri Aug 21 16:34:38 2009 -0500

    mpc83xx: accommodate larger kernel sizes by default

    linux mpc83xx_defconfig kernels are getting bigger, accommodate for
    their growth by adjusting default load and fdt addresses.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 8eceeb7fd656d6d071c0a8b615e178aca5775fff
Author: Kim Phillips <kim.phillips@freescale.com>
Date:   Fri Aug 21 16:33:15 2009 -0500

    mpc83xx: mpc8377erdb - change DDR settings to those from latest bsp

    when using Linus' 83xx_defconfig, the mpc8377rdb would hang at boot
    at either:

    NET: Registered protocol family 16

    or the

    io scheduler cfq registered

    message.  Fixing up these DDR settings appears to fix the problem.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 27c5248dd4c9ba4a36899689595956c5e59e349a
Author: Kim Phillips <kim.phillips@freescale.com>
Date:   Fri Aug 21 16:31:20 2009 -0500

    mpc83xx: tqm8349 - remove pci & flash window conflict

    commit 9993e196da707a0a1cd4584f1fcef12382c1c144 "mpc83xx: convert all
    remaining boards over to 83XX_GENERIC_PCI" remapped pci windows on
    tqm834x to make it more consistent with the other 83xx boards.  During
    that time however, the author failed to realize that FLASH_BASE was
    occupying the same range as what PCI1_MEM_BASE was being assigned.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
    Tested-by: Wolfgang Denk <wd@denx.de>

commit 6d2c26ac831f033b0025cfb256365a047f8dd115
Author: Heiko Schocher <hs@denx.de>
Date:   Fri Aug 21 16:30:30 2009 -0500

    mpc83xx: add missing CSCONFIG_ODT_WR_CFG for 832x CPUs

    Signed-off-by: Heiko Schocher <hs@denx.de>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 193b4cb3f641ed0fd9bb79b8fa4671882c50ffdb
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Aug 21 16:27:05 2009 -0500

    mpc83xx: mpc8349 - delete unused SYS_MID_FLASH_JUMP

    This was introduced with the MPC8349EMDS board, and then copied to
    a couple other boards by nature of being the reference implementation.

      u-boot$git grep CONFIG_SYS_MID_FLASH_JUMP
      include/configs/MPC8349EMDS.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
      include/configs/sbc8349.h:#define CONFIG_SYS_MID_FLASH_JUMP     0x7F000000
      include/configs/vme8349.h:#define CONFIG_SYS_MID_FLASH_JUMP     0x7F000000
      u-boot$

    It currently isn't used, so delete it before it spreads further.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit c0d660fbbede322648ec79d3e39389e48f5fab24
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:   Fri Aug 21 16:21:58 2009 -0500

    mpc83xx: sbc8349 - make enabling PCI more user friendly

    Prior to this commit, to enable PCI, you had to go manually
    edit the board config header, which isn't really user friendly.
    This adds the typical PCI make targets to the toplevel Makefile
    in accordance with what is being done with other boards.

    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit a3c5057a6c05b4c7235a270486220e4511366133
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:   Fri Aug 7 23:37:54 2009 +0200

    eeprom_m95xxx: remove unused variable i

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 8cf19b9fec92d8aa22b2fe4b4e6976743b1daa51
Author: Ilya Yanok <yanok@emcraft.com>
Date:   Fri Jul 17 15:02:42 2009 +0400

    jffs2: some fixes to summary support

    This patch fixes some issues with JFFS2 summary support in U-Boot.
    1/ Summary support made compilation configurable (as summary support
    considered expiremental even in Linux).
    2/ Summary code can do unaligned 16-bit and 32-bit memory accesses.
    We need to get data byte by byte to exclude data aborts.
    3/ Make summary scan in two passes so we can safely fall back to full
    scan if we found unsupported entry in the summary.

    Signed-off-by: Ilya Yanok <yanok@emcraft.com>

commit 11906936e168d12d684bb3d2930a62693ba3d84e
Author: Prafulla Wadaskar <prafulla@marvell.com>
Date:   Mon Aug 10 18:55:54 2009 +0530

    arm: rd6281a: Fixed NAND specific warning

    It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF
    for NAND specific warning removal, same is done in this patch

    Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

commit b5ffb193330113d2e00489d96bf8ec1f541ed4e1
Author: Wolfgang Denk <wd@denx.de>
Date:   Thu Aug 13 00:37:16 2009 +0200

    TRAB: make independent of specific libgcc helper routines

    The TRAB board references local libgcc helper routines
    (lib_arm/div0.o and lib_arm/_umodsi3.o) which cause build problems
    when we try to use the normal, compiler provided libgcc instead.
    Removing these references allows to build both with and without the
    local libgcc helper routines.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 1aada9cd643567d351667138851e9231ccfa245a
Author: Wolfgang Denk <wd@denx.de>
Date:   Mon Aug 17 14:00:53 2009 +0200

    Fix all linker scripts for older binutils versions (pre-2.16)

    Commit f62fb99941c6 fixed handling of all rodata sections by using a
    wildcard combined with calls to ld's builtin functions SORT_BY_ALIGNMENT()
    and SORT_BY_NAME().  Unfortunately these functions were only
    introduced with biunutils version 2.16, so the modification broke
    building with all tool chains using older binutils.

    This patch makes it work again.  This is done by omitting the use of
    these functions for such old tool chains.  This will result in
    slightly larger target binaries, as the rodata sections are no longer
    in optimal order alignment-wise which reauls in unused gaps, but the
    effect was found to be insignificant - especially compared to the fact
    that you cannot build U-Boot at all in the current state.

    As ld seems to have no support for conditionals we run the linker
    script through the C preprocessor which can be easily used to remove
    the unwanted function calls.

    Note that the C preprocessor must be run with the "-ansi" (or a
    "-std=") option to make sure all the system-specific predefined
    macros outside the reserved namespace are suppressed. Otherise, cpp
    might for example substitute "powerpc" to "1", thus corrupting for
    example "OUTPUT_ARCH(powerpc)" etc.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Mike Frysinger <vapier@gentoo.org>

commit f772acf8a584067033eff1e231fcd1fb3a00d3d9
Author: Wolfgang Denk <wd@denx.de>
Date:   Mon Aug 17 13:17:29 2009 +0200

    ARM: compiler options cleanup - improve tool chain support

    For some time there have been repeated reports about build problems
    with some ARM (cross) tool chains.  Especially issues about
    (in)compatibility with the tool chain provided runtime support
    library libgcc.a caused to add and support a private implementation
    of such runtime support code in U-Boot.  A closer look at the code
    indicated that some of these issues are actually home-made.  This
    patch attempts to clean up some of the most obvious problems and make
    building of U-Boot with different tool chains easier:

    - Even though all ARM systems basicy used the same compiler options
      to select a specific ABI from the tool chain, the code for this was
      distributed over all cpu/*/config.mk files.  We move this one level
      up into lib_arm/config.mk instead.

    - So far, we only checked if "-mapcs-32" was supported by the tool
      chain; if yes, this was used, if not, "-mabi=apcs-gnu" was
      selected, no matter if the tool chain actually understood this
      option.  There was no support for EABI conformant tool chains.
      This patch implements the following logic:

      1) If the tool chain supports
        "-mabi=aapcs-linux -mno-thumb-interwork"
         we use these options (EABI conformant tool chain).
      2) Otherwise, we check first if
        "-mapcs-32"
         is supported, and then check for
        "-mabi=apcs-gnu"
         If one test succeeds, we use the first found option.
      3) In case 2), we also test if "-mno-thumb-interwork", and use
         this if the test succeeds. [For "-mabi=aapcs-linux" we set
         "-mno-thumb-interwork" mandatorily.]

      This way we use a similar logic for the compile options as the
      Linux kernel does.

    - Some EABI conformant tool chains cause external references to
      utility functions like raise(); such functions are provided in the
      new file lib_arm/eabi_compat.c

      Note that lib_arm/config.mk gets parsed several times, so we must
      make sure to add eabi_compat.o only once to the linker list.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Cc: Dirk Behme <dirk.behme@googlemail.com>
    Cc: Magnus Lilja <lilja.magnus@gmail.com>
    Cc: Tom Rix <Tom.Rix@windriver.com>
    Cc: Prafulla Wadaskar <prafulla@marvell.com>
    Acked-by: Sergey Kubushyn <ksi@koi8.net>
    Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
    Tested-by: Andrzej Wolski <awolski@poczta.fm>
    Tested-by: Gaye Abdoulaye Walsimou <walsimou@walsimou.com>
    Tested-by: Tom Rix <Tom.Rix@windriver.com>
    Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit 269610f6ba2e4a7bc27d2e53d43160614016964f
Author: Mingkai Hu <Mingkai.hu@freescale.com>
Date:   Thu Jul 30 17:56:51 2009 +0800

    NAND boot: fix nand_load overlap issue

    The code copy data from NAND flash block by block, so when
    the data length isn't a whole-number multiple of the block
    size, it will overlap the rest space.

    Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit 1fc1d9aed08f2b3366d634fda6712a710b2cff9a
Author: Giulio Benetti <giulio.benetti@micronovasrl.com>
Date:   Fri Jul 31 17:30:34 2009 -0500

    add WATCHDOG_RESET() on nand write and read

    Signed-off-by: giulio.benetti@micronovasrl.com
    Acked-by: Wolfgang Denk <wd@denx.de>
    Signed-off-by: Scott Wood <scottwood@freescale.com>

commit b1e849f2201bbbf3ca81fde164f154f9caf7f0e9
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Wed Feb 4 15:14:05 2009 -0600

    tsec: Wait for auto-negotiation to complete without link

    Previously, waiting for auto-negotiation would only occur if a valid
    link had been detected.  Problems arose when attempting to use a
    tsec immediately after bootup but before link was achieved, eg:
    => dhcp
    Auto-neg error, defaulting to 10BT/HD
    eTSEC1: No link.
    Auto-neg error, defaulting to 10BT/HD
    eTSEC2: No link.
    =>

    With this patch applied the same operation as above resulted in:
    => dhcp
    Waiting for PHY auto negotiation to complete. done
    Enet starting in 1000BT/FD
    Speed: 1000, full duplex

    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 477fa6378fbd3e47a5e2e83d0dd3970d5b1c8371
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Thu Aug 20 10:14:11 2009 +0200

    arm: kirkwood: See to it that sent data is 8-byte aligned

    U-boot might use non-8-byte-aligned addresses for sending data, which
    the kwgbe_send doesn't accept (bootp does this for me). This patch
    copies the data to be sent to a malloced temporary buffer if it is
    non-aligned.

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit cad713bf7548b9e90433dac8270165402a6c9cc3
Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date:   Thu Aug 20 10:13:06 2009 +0200

    Wait for the link to come up on kirkwood network init

    This patch makes the device wait for up to 5 seconds for the link to
    come up, similar to what many of the other network drivers do. This
    avoids confusing situations where, e.g., a tftp fails when initiated
    early after U-boot has started (before the link has come up).

    Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>