1/* 2 * (C) Copyright 2001 3 * Denis Peter, MPL AG Switzerland 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 * 23 * Note: Part of this code has been derived from linux 24 * 25 */ 26#ifndef _USB_UHCI_H_ 27#define _USB_UHCI_H_ 28 29 30/* Command register */ 31#define USBCMD 0 32#define USBCMD_RS 0x0001 /* Run/Stop */ 33#define USBCMD_HCRESET 0x0002 /* Host reset */ 34#define USBCMD_GRESET 0x0004 /* Global reset */ 35#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */ 36#define USBCMD_FGR 0x0010 /* Force Global Resume */ 37#define USBCMD_SWDBG 0x0020 /* SW Debug mode */ 38#define USBCMD_CF 0x0040 /* Config Flag (sw only) */ 39#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */ 40 41/* Status register */ 42#define USBSTS 2 43#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */ 44#define USBSTS_ERROR 0x0002 /* Interrupt due to error */ 45#define USBSTS_RD 0x0004 /* Resume Detect */ 46#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */ 47#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */ 48#define USBSTS_HCH 0x0020 /* HC Halted */ 49 50/* Interrupt enable register */ 51#define USBINTR 4 52#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */ 53#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */ 54#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */ 55#define USBINTR_SP 0x0008 /* Short packet interrupt enable */ 56 57#define USBFRNUM 6 58#define USBFLBASEADD 8 59#define USBSOF 12 60 61/* USB port status and control registers */ 62#define USBPORTSC1 16 63#define USBPORTSC2 18 64#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */ 65#define USBPORTSC_CSC 0x0002 /* Connect Status Change */ 66#define USBPORTSC_PE 0x0004 /* Port Enable */ 67#define USBPORTSC_PEC 0x0008 /* Port Enable Change */ 68#define USBPORTSC_LS 0x0030 /* Line Status */ 69#define USBPORTSC_RD 0x0040 /* Resume Detect */ 70#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */ 71#define USBPORTSC_PR 0x0200 /* Port Reset */ 72#define USBPORTSC_SUSP 0x1000 /* Suspend */ 73 74/* Legacy support register */ 75#define USBLEGSUP 0xc0 76#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ 77 78#define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */ 79#define UHCI_PID 0xff /* PID MASK */ 80 81#define UHCI_PTR_BITS 0x000F 82#define UHCI_PTR_TERM 0x0001 83#define UHCI_PTR_QH 0x0002 84#define UHCI_PTR_DEPTH 0x0004 85 86/* for TD <status>: */ 87#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */ 88#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */ 89#define TD_CTRL_LS (1 << 26) /* Low Speed Device */ 90#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */ 91#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */ 92#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */ 93#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */ 94#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */ 95#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */ 96#define TD_CTRL_NAK (1 << 19) /* NAK Received */ 97#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */ 98#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */ 99#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */ 100 101#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \ 102 TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF) 103 104#define TD_TOKEN_TOGGLE 19 105 106/* ------------------------------------------------------------------------------------ 107 Virtual Root HUB 108 ------------------------------------------------------------------------------------ */ 109/* destination of request */ 110#define RH_INTERFACE 0x01 111#define RH_ENDPOINT 0x02 112#define RH_OTHER 0x03 113 114#define RH_CLASS 0x20 115#define RH_VENDOR 0x40 116 117/* Requests: bRequest << 8 | bmRequestType */ 118#define RH_GET_STATUS 0x0080 119#define RH_CLEAR_FEATURE 0x0100 120#define RH_SET_FEATURE 0x0300 121#define RH_SET_ADDRESS 0x0500 122#define RH_GET_DESCRIPTOR 0x0680 123#define RH_SET_DESCRIPTOR 0x0700 124#define RH_GET_CONFIGURATION 0x0880 125#define RH_SET_CONFIGURATION 0x0900 126#define RH_GET_STATE 0x0280 127#define RH_GET_INTERFACE 0x0A80 128#define RH_SET_INTERFACE 0x0B00 129#define RH_SYNC_FRAME 0x0C80 130/* Our Vendor Specific Request */ 131#define RH_SET_EP 0x2000 132 133/* Hub port features */ 134#define RH_PORT_CONNECTION 0x00 135#define RH_PORT_ENABLE 0x01 136#define RH_PORT_SUSPEND 0x02 137#define RH_PORT_OVER_CURRENT 0x03 138#define RH_PORT_RESET 0x04 139#define RH_PORT_POWER 0x08 140#define RH_PORT_LOW_SPEED 0x09 141#define RH_C_PORT_CONNECTION 0x10 142#define RH_C_PORT_ENABLE 0x11 143#define RH_C_PORT_SUSPEND 0x12 144#define RH_C_PORT_OVER_CURRENT 0x13 145#define RH_C_PORT_RESET 0x14 146 147/* Hub features */ 148#define RH_C_HUB_LOCAL_POWER 0x00 149#define RH_C_HUB_OVER_CURRENT 0x01 150 151#define RH_DEVICE_REMOTE_WAKEUP 0x00 152#define RH_ENDPOINT_STALL 0x01 153 154/* Our Vendor Specific feature */ 155#define RH_REMOVE_EP 0x00 156 157 158#define RH_ACK 0x01 159#define RH_REQ_ERR -1 160#define RH_NACK 0x00 161 162 163/* Transfer descriptor structure */ 164typedef struct { 165 unsigned long link; /* next td/qh (LE)*/ 166 unsigned long status; /* status of the td */ 167 unsigned long info; /* Max Lenght / Endpoint / device address and PID */ 168 unsigned long buffer; /* pointer to data buffer (LE) */ 169 unsigned long dev_ptr; /* pointer to the assigned device (BE) */ 170 unsigned long res[3]; /* reserved (TDs must be 8Byte aligned) */ 171} uhci_td_t, *puhci_td_t; 172 173/* Queue Header structure */ 174typedef struct { 175 unsigned long head; /* Next QH (LE)*/ 176 unsigned long element; /* Queue element pointer (LE) */ 177 unsigned long res[5]; /* reserved */ 178 unsigned long dev_ptr; /* if 0 no tds have been assigned to this qh */ 179} uhci_qh_t, *puhci_qh_t; 180 181struct virt_root_hub { 182 int devnum; /* Address of Root Hub endpoint */ 183 int numports; /* number of ports */ 184 int c_p_r[8]; /* C_PORT_RESET */ 185}; 186 187 188#endif /* _USB_UHCI_H_ */ 189